This study was part of the framework that contributed not only to the improvement of thermal comfort in housing but also to the decarbonization of the construction and building materials industry. For this purpose, te...This study was part of the framework that contributed not only to the improvement of thermal comfort in housing but also to the decarbonization of the construction and building materials industry. For this purpose, terracotta brick seems to meet these needs. Thus, the objective of this work was to evaluate the influence of the incorporation of coal fly ash from a thermal power plant on the physical and mechanical properties of fired bricks from grey clay in the Thicky area of Senegal. The coal fly ash was incorporated into the raw clay material in proportions of 0, 5, 10, and 15 % by weight. These two raw materials were first characterized by X-ray fluorescence spectroscopy (XRF). The XRF analyses showed that the most abundant oxides in clay were SiO2 (55.034%) and Fe2O3 (10.155%). In coal fly ash, SiO2 (38.574%) is predominant. The ash also contained Al2O3 (7.717%) and alicano-earthy melting oxides such as CaO (9.271%) and MgO (7.298%) etc. These melting oxides were necessary to facilitate the formation of the liquid phase when baking platelets. The latter, when burned at a temperature of 880°C, were characterized by determining the number of physico-mechanical parameters, such as linear shrinkage during cooking, water absorption, fire loss and compressive strength. A Hierarchical Ascending Classification of these different parameters was performed and three classes were obtained. Class 1 with better compressive strength (6.358 MPa), was in sample A (5%). Class 2 consisted of sample D (reference) and had a higher plasticity index (28.51%) and water absorption rate (11.19%). Finally, class 3, which included samples B (10%) and C (15%), had very high shrinkage and fire losses compared to other platelets. These results highlighted the possibility of using up to 5% of the coal fly ash in the production of new fired bricks with good performance.展开更多
This study develops an analytical model to evaluate the cooling performance of a porous terracotta tubular direct evaporative heat and mass exchanger. By combining energy and mass balance equations with heat and mass ...This study develops an analytical model to evaluate the cooling performance of a porous terracotta tubular direct evaporative heat and mass exchanger. By combining energy and mass balance equations with heat and mass transfer coefficients and air psychrometric correlations, the model provides insights into the impact of design and operational parameters on the exchanger cooling performance. Validated against an established numerical model, it accurately simulates cooling behavior with a Root Mean Square Deviation of 0.43 - 1.18˚C under varying inlet air conditions. The results show that tube geometry, including equivalent diameter, flatness ratio, and length significantly influences cooling outcomes. Smaller diameters enhance wet-bulb effectiveness but reduce cooling capacity, while increased flatness and length improve both. For example, extending the flatness ratio of a 15 mm diameter, 0.6 m long tube from 1 (circular) to 4 raises the exchange surface area from 0.028 to 0.037 m2, increasing wet-bulb effectiveness from 60% to 71%. Recommended diameters range from 5 mm for tubes under 0.5 m to 1 cm for tubes 0.5 to 1 m in length. Optimal air velocities depend on tube length: 1 m/s for tubes under 0.8 m, 1.5 m/s for lengths of 0.8 to 1.2 m, and up to 2 m/s for longer tubes. This model offers a practical alternative to complex numerical and CFD methods, with potential applications in cooling tower optimization for thermal and nuclear power plants and geothermal heat exchangers.展开更多
During summer vacation,I had the extraordinary opportunity to join a study tour to Xi’an,one of China’s ancient capitals and home to the world-famous Terracotta Army.This trip was more than a visit to a historical s...During summer vacation,I had the extraordinary opportunity to join a study tour to Xi’an,one of China’s ancient capitals and home to the world-famous Terracotta Army.This trip was more than a visit to a historical site;it was a journey through time that allowed me to deeply immerse myself in China’s rich history and culture.展开更多
Terracotta rider fi gurines are common artifacts in the past, generally combinations of person riding animals like horse or camel, through these organic fi gures we can see vivid pictures of ancient social life and cu...Terracotta rider fi gurines are common artifacts in the past, generally combinations of person riding animals like horse or camel, through these organic fi gures we can see vivid pictures of ancient social life and cultural evolution. A lot of researches on terracotta fi gurines have been reported, but terracotta rider fi gurines have been less studied as an independent object. This paper studied terracotta rider fi gurines, and found that this cultural form originated from the Warring States Period, thrived in the Tang Dynasty, and declined gradually after the Yuan Dynasty. The declination of ancient terracotta rider fi gurine culture owes to the changing social environment in different historical periods. Researches on terracotta rider fi gurines explored social customs and conventions behind them, and provided signifi cant theoretical support for protecting the cultural heritage.展开更多
In order to search for sources of the raw material of the Qin’s terracotta warriors and horses, we selected 20 samples of pottery warriors and pottery horses of the Qin’s Mausoleum from pit No. 1,19 samples of potte...In order to search for sources of the raw material of the Qin’s terracotta warriors and horses, we selected 20 samples of pottery warriors and pottery horses of the Qin’s Mausoleum from pit No. 1,19 samples of pottery warriors and brick from pit No. 2, 20 samples of clays near the Qin’s Mausoleum and 2 samples of Yaozhou porcelain bodies. The 32 kinds of element content of each sample were measured by neutron activation analysis (NAA). These data were analyzed by fuzzy cluster analysis, the trend cluster analysis diagram was obtained. The results showed that samples of terracotta warriors and horses from pits No.1 and No. 2 were closely related to the loam layer near Qin’s Mausoleum, but their relations with the loess layers were not so close, and they were out of all relation to Yaozhou porcelain bodies. Thus, it could be deduced that the Li Mountain clay may be considered as the original place of the raw materials of the terracotta warriors and horses, the kiln sites might be located nearby the Qin’s展开更多
There have been selected 83 samples of terracotta warriors and horses of Emperor Qin Shi Huang's Mausoleum, 20 samples of clays taken from around Qin's Mausoleum and 2 samples of Yaozhou porcelain bodies. All ...There have been selected 83 samples of terracotta warriors and horses of Emperor Qin Shi Huang's Mausoleum, 20 samples of clays taken from around Qin's Mausoleum and 2 samples of Yaozhou porcelain bodies. All these samples have been measured by instrument neutron activation analysis (INAA) and as many as 32 kinds of element contents of each sample are measured. The following conclusion has been reached when fuzzy cluster analysis is conducted to element contents of all these samples: (i) The samples are roughly classified into five categories: namely, samples from pits No. 1 and No. 2; samples from pit No. 3; loam layers; the mixture of loam and loess; and Yaozhou porcelain bodies. (ii) The terracottawarriors and horses in pits No. 1, No. 2 and No. 3 are relatively independent from one another. The clays from which they were made are not entirely identical.We have found that samples in pit No. 3 are very closely related and their claysources are comparatively concentrated. Samples in pits No. 1 and No. 2 are less related and their clay sources are comparatively scattered. (iii) The clays from which the terracotta warriors and horses were made are closely related to theloam layer near Qin's Mausoleum, particularly to the loam layer of Zaoyuan village and Gaoxing village, but they are not so related to loess layers there, nor to the loam layers of Anhoubao, even less related to Yaozhou porcelain bodies. Arational deduction thus drawn is that the raw material of clays from which the terracotta warriors and horses were made might probably be taken from loam layers around Zaoyuan and Gaoxing, or loam layers near Qin's Mausoleum whose properties are identical with those of loam layers of Zaoyuan and Gaoxing, rather than loess layers around the above places. Since the raw material of the terracotta warriors and horses was taken from loam near Qin's Mausoleum, it could be deductedthat the kiln sites might be located in around Qin's Mausoleum.展开更多
On Oct 1,2017,Mystery of Terracotta Warriors aired on Channel 1 of Romania’s state televisio n,in troducing the achievements that China’s Shaaxi province and the city of Xi’an had made in conserving historic herita...On Oct 1,2017,Mystery of Terracotta Warriors aired on Channel 1 of Romania’s state televisio n,in troducing the achievements that China’s Shaaxi province and the city of Xi’an had made in conserving historic heritages and developing the economy,tourism,education and culture,as well as changes that had taken place in society,urban appearance and people’s lives.Shaanxi,especially its capital,Xi’an,展开更多
A proteinaceous binding media for the polychrome terracotta army of Emperor Qin Shihuang has been identified using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry(MALDI-TOF-MS).Methods for...A proteinaceous binding media for the polychrome terracotta army of Emperor Qin Shihuang has been identified using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry(MALDI-TOF-MS).Methods for the preparation of the model samples and the elimination of interferences have been evaluated,as well as ageing processes.A method involving the complexation of EDTA in combination with dialysis was used to eliminate any interference in the polychrome layers taken from the historical samples.The model samples were aged by being buried in loess to replicate the ageing process of the historical samples as closely as possible.The optimum conditions for the extraction and subsequent enzymatic hydrolysis of the extracted protein were investigated.Under the optimized conditions,the‘‘peptide mass fingerprints’’of the proteinaceous binding media from the historical and model samples were determined by MALDITOF-MS.The results revealed that animal glue was used as the binding media for the polychrome layers of Emperor Qin Shihuang’s terracotta army.It also shows that animal glue used as binding media has a long history in China.展开更多
文摘This study was part of the framework that contributed not only to the improvement of thermal comfort in housing but also to the decarbonization of the construction and building materials industry. For this purpose, terracotta brick seems to meet these needs. Thus, the objective of this work was to evaluate the influence of the incorporation of coal fly ash from a thermal power plant on the physical and mechanical properties of fired bricks from grey clay in the Thicky area of Senegal. The coal fly ash was incorporated into the raw clay material in proportions of 0, 5, 10, and 15 % by weight. These two raw materials were first characterized by X-ray fluorescence spectroscopy (XRF). The XRF analyses showed that the most abundant oxides in clay were SiO2 (55.034%) and Fe2O3 (10.155%). In coal fly ash, SiO2 (38.574%) is predominant. The ash also contained Al2O3 (7.717%) and alicano-earthy melting oxides such as CaO (9.271%) and MgO (7.298%) etc. These melting oxides were necessary to facilitate the formation of the liquid phase when baking platelets. The latter, when burned at a temperature of 880°C, were characterized by determining the number of physico-mechanical parameters, such as linear shrinkage during cooking, water absorption, fire loss and compressive strength. A Hierarchical Ascending Classification of these different parameters was performed and three classes were obtained. Class 1 with better compressive strength (6.358 MPa), was in sample A (5%). Class 2 consisted of sample D (reference) and had a higher plasticity index (28.51%) and water absorption rate (11.19%). Finally, class 3, which included samples B (10%) and C (15%), had very high shrinkage and fire losses compared to other platelets. These results highlighted the possibility of using up to 5% of the coal fly ash in the production of new fired bricks with good performance.
文摘This study develops an analytical model to evaluate the cooling performance of a porous terracotta tubular direct evaporative heat and mass exchanger. By combining energy and mass balance equations with heat and mass transfer coefficients and air psychrometric correlations, the model provides insights into the impact of design and operational parameters on the exchanger cooling performance. Validated against an established numerical model, it accurately simulates cooling behavior with a Root Mean Square Deviation of 0.43 - 1.18˚C under varying inlet air conditions. The results show that tube geometry, including equivalent diameter, flatness ratio, and length significantly influences cooling outcomes. Smaller diameters enhance wet-bulb effectiveness but reduce cooling capacity, while increased flatness and length improve both. For example, extending the flatness ratio of a 15 mm diameter, 0.6 m long tube from 1 (circular) to 4 raises the exchange surface area from 0.028 to 0.037 m2, increasing wet-bulb effectiveness from 60% to 71%. Recommended diameters range from 5 mm for tubes under 0.5 m to 1 cm for tubes 0.5 to 1 m in length. Optimal air velocities depend on tube length: 1 m/s for tubes under 0.8 m, 1.5 m/s for lengths of 0.8 to 1.2 m, and up to 2 m/s for longer tubes. This model offers a practical alternative to complex numerical and CFD methods, with potential applications in cooling tower optimization for thermal and nuclear power plants and geothermal heat exchangers.
文摘During summer vacation,I had the extraordinary opportunity to join a study tour to Xi’an,one of China’s ancient capitals and home to the world-famous Terracotta Army.This trip was more than a visit to a historical site;it was a journey through time that allowed me to deeply immerse myself in China’s rich history and culture.
文摘Terracotta rider fi gurines are common artifacts in the past, generally combinations of person riding animals like horse or camel, through these organic fi gures we can see vivid pictures of ancient social life and cultural evolution. A lot of researches on terracotta fi gurines have been reported, but terracotta rider fi gurines have been less studied as an independent object. This paper studied terracotta rider fi gurines, and found that this cultural form originated from the Warring States Period, thrived in the Tang Dynasty, and declined gradually after the Yuan Dynasty. The declination of ancient terracotta rider fi gurine culture owes to the changing social environment in different historical periods. Researches on terracotta rider fi gurines explored social customs and conventions behind them, and provided signifi cant theoretical support for protecting the cultural heritage.
基金This work was supported by the National Natural Science Foundation of China (Grant Nos. 59872032 and 10175053) the Natural Science Foundation of Henan Province (Grant No. 004051500) the Youth Foundation of Zhengzhou University and Open Lab of Nuclear
文摘In order to search for sources of the raw material of the Qin’s terracotta warriors and horses, we selected 20 samples of pottery warriors and pottery horses of the Qin’s Mausoleum from pit No. 1,19 samples of pottery warriors and brick from pit No. 2, 20 samples of clays near the Qin’s Mausoleum and 2 samples of Yaozhou porcelain bodies. The 32 kinds of element content of each sample were measured by neutron activation analysis (NAA). These data were analyzed by fuzzy cluster analysis, the trend cluster analysis diagram was obtained. The results showed that samples of terracotta warriors and horses from pits No.1 and No. 2 were closely related to the loam layer near Qin’s Mausoleum, but their relations with the loess layers were not so close, and they were out of all relation to Yaozhou porcelain bodies. Thus, it could be deduced that the Li Mountain clay may be considered as the original place of the raw materials of the terracotta warriors and horses, the kiln sites might be located nearby the Qin’s
文摘There have been selected 83 samples of terracotta warriors and horses of Emperor Qin Shi Huang's Mausoleum, 20 samples of clays taken from around Qin's Mausoleum and 2 samples of Yaozhou porcelain bodies. All these samples have been measured by instrument neutron activation analysis (INAA) and as many as 32 kinds of element contents of each sample are measured. The following conclusion has been reached when fuzzy cluster analysis is conducted to element contents of all these samples: (i) The samples are roughly classified into five categories: namely, samples from pits No. 1 and No. 2; samples from pit No. 3; loam layers; the mixture of loam and loess; and Yaozhou porcelain bodies. (ii) The terracottawarriors and horses in pits No. 1, No. 2 and No. 3 are relatively independent from one another. The clays from which they were made are not entirely identical.We have found that samples in pit No. 3 are very closely related and their claysources are comparatively concentrated. Samples in pits No. 1 and No. 2 are less related and their clay sources are comparatively scattered. (iii) The clays from which the terracotta warriors and horses were made are closely related to theloam layer near Qin's Mausoleum, particularly to the loam layer of Zaoyuan village and Gaoxing village, but they are not so related to loess layers there, nor to the loam layers of Anhoubao, even less related to Yaozhou porcelain bodies. Arational deduction thus drawn is that the raw material of clays from which the terracotta warriors and horses were made might probably be taken from loam layers around Zaoyuan and Gaoxing, or loam layers near Qin's Mausoleum whose properties are identical with those of loam layers of Zaoyuan and Gaoxing, rather than loess layers around the above places. Since the raw material of the terracotta warriors and horses was taken from loam near Qin's Mausoleum, it could be deductedthat the kiln sites might be located in around Qin's Mausoleum.
文摘On Oct 1,2017,Mystery of Terracotta Warriors aired on Channel 1 of Romania’s state televisio n,in troducing the achievements that China’s Shaaxi province and the city of Xi’an had made in conserving historic heritages and developing the economy,tourism,education and culture,as well as changes that had taken place in society,urban appearance and people’s lives.Shaanxi,especially its capital,Xi’an,
基金supported by the National Key Technology R&D Program of China (2010BAK67B12)
文摘A proteinaceous binding media for the polychrome terracotta army of Emperor Qin Shihuang has been identified using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry(MALDI-TOF-MS).Methods for the preparation of the model samples and the elimination of interferences have been evaluated,as well as ageing processes.A method involving the complexation of EDTA in combination with dialysis was used to eliminate any interference in the polychrome layers taken from the historical samples.The model samples were aged by being buried in loess to replicate the ageing process of the historical samples as closely as possible.The optimum conditions for the extraction and subsequent enzymatic hydrolysis of the extracted protein were investigated.Under the optimized conditions,the‘‘peptide mass fingerprints’’of the proteinaceous binding media from the historical and model samples were determined by MALDITOF-MS.The results revealed that animal glue was used as the binding media for the polychrome layers of Emperor Qin Shihuang’s terracotta army.It also shows that animal glue used as binding media has a long history in China.
