Amide-and alkyl-modified nanosilicas(AANPs)were synthesized and introduced into Xanthan gum(XG)solution,aiming to improve the temperature/salt tolerance and oil recovery.The rheological behaviors of XG/AANP hybrid dis...Amide-and alkyl-modified nanosilicas(AANPs)were synthesized and introduced into Xanthan gum(XG)solution,aiming to improve the temperature/salt tolerance and oil recovery.The rheological behaviors of XG/AANP hybrid dispersions were systematically studied at different concentrations,temperatures and inorganic salts.At high temperature(75C)and high salinity(10,000 mg,L1 NaCl),AANPs increase the apparent viscosity and dynamic modulus of the XG solution,and XG/AANP hybrid dispersion exhibits elastic-dominant properties.The most effective concentrations of XG and AANP interacting with each other are 1750 mg·L^(-1) and 0.74 wt%,respectively.The temperature tolerance of XG solution is not satisfactory,and high temperature further weakens the salt tolerance of XG.However,the AANPs significantly enhance the viscoelasticity the XG solution through hydrogen bonds and hydrophobic effect.Under reservoir conditions,XG/AANP hybrid recovers approximately 18.5%more OOIP(original oil in place)than AANP and 11.3%more OOIP than XG.The enhanced oil recovery mechanism of the XG/AANP hybrid is mainly increasing the sweep coefficient,the contribution from the reduction of oil-water interfacial tension is less.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
In recent years,the research on superconductivity in one-dimensional(1D)materials has been attracting increasing attention due to its potential applications in low-dimensional nanodevices.However,the critical temperat...In recent years,the research on superconductivity in one-dimensional(1D)materials has been attracting increasing attention due to its potential applications in low-dimensional nanodevices.However,the critical temperature(T_(c))of 1D superconductors is low.In this work,we theoretically investigate the possible high T_(c) superconductivity of(5,5)carbon nanotube(CNT).The pristine(5,5)CNT is a Dirac semimetal and can be modulated into a semiconductor by full hydrogenation.Interestingly,by further hole doping,it can be regulated into a metallic state with the sp3-hybridized𝜎electrons metalized,and a giant Kohn anomaly appears in the optical phonons.The two factors together enhance the electron–phonon coupling,and lead to high-T_(c) superconductivity.When the hole doping concentration of hydrogenated-(5,5)CNT is 2.5 hole/cell,the calculated T_(c) is 82.3 K,exceeding the boiling point of liquid nitrogen.Therefore,the predicted hole-doped hydrogenated-(5,5)CNT provides a new platform for 1D high-T_(c) superconductivity and may have potential applications in 1D nanodevices.展开更多
Temperature has a substantial impact on the emission of biogenic volatile organic compounds(BVOCs).Moder-ate warm temperatures,e.g.,30–40°C,could boost plant metabolism,increasing BVOC emissions.Against the back...Temperature has a substantial impact on the emission of biogenic volatile organic compounds(BVOCs).Moder-ate warm temperatures,e.g.,30–40°C,could boost plant metabolism,increasing BVOC emissions.Against the backdrop of global warming,plants emit more BVOCs to cope with thermal stress,leading to elevated concen-trations of tropospheric ozone(O_(3))and secondary organic aerosols(SOA).In recent years,a considerable body of research has explored the interaction between tree species and BVOCs under the influence of various environ-mental factors.Although many studies have examined explored the temperature dependence of BVOC emissions in the past,few studies have conducted a comprehensive and in-depth investigation into the impacts of tempera-ture.This review summarizes the relevant studies on BVOCs in the past decade,including the main biosynthetic pathways,emission observation techniques and emission inventories,as well as how temperature affects isoprene and monoterpene emission rates and the formation of O_(3) and SOA.Our work offers a theoretical foundation and guidance for future efforts to advance the comprehension of BVOC emission characteristics and develop strategies to mitigate secondary pollution.展开更多
Human activities have significantly impacted the land surface temperature(LST),endangering human health;however,the relationship between these two factors has not been adequately quantified.This study comprehensively ...Human activities have significantly impacted the land surface temperature(LST),endangering human health;however,the relationship between these two factors has not been adequately quantified.This study comprehensively constructs a Human Activity Intensity(HAI)index and employs the Maximal Information Coefficient,four-quadrant model,and XGBoostSHAP model to investigate the spatiotemporal relationship and influencing factors of HAI-LST in the Yellow River Basin(YRB)from 2000 to 2020.The results indicated that from 2000 to 2020,as HAI and LST increased,the static HAI-LST relationship in the YRB showed a positive correlation that continued to strengthen.This dynamic relationship exhibited conflicting development,with the proportion of coordinated to conflicting regions shifting from 1:4 to 1:2,indicating a reduction in conflict intensity.Notably,only the degree of conflict in the source area decreased significantly,whereas it intensified in the upper and lower reaches.The key factors influencing the HAI-LST relationship include fractional vegetation cover,slope,precipitation,and evapotranspiration,along with region-specific factors such as PM_(2.5),biodiversity,and elevation.Based on these findings,region-specific ecological management strategies have been proposed to mitigate conflict-prone areas and alleviate thermal stress,thereby providing important guidance for promoting harmonious development between humans and nature.展开更多
Understanding the temperature dependent deformation behavior of Mg alloys is crucial for their expanding use in the aerospace sector.This study investigates the deformation mechanisms of hot-rolled AZ61 Mg alloy under...Understanding the temperature dependent deformation behavior of Mg alloys is crucial for their expanding use in the aerospace sector.This study investigates the deformation mechanisms of hot-rolled AZ61 Mg alloy under uniaxial tension along rolling direction(RD)and transverse direction(TD)at-50,25,50,and 150℃.Results reveal a transition from high strength with limited elongation at-50℃ to significant softening and maximum ductility at 150℃.TD samples consistently showed 2%-6%higher strength than RD;however,this yield anisotropy diminished at 150℃ due to the shift from twinning to thermally activated slip and recovery.Fractography indicated a change from semi-brittle to fully ductile fracture with increasing temperature.Electron backscattered diffraction(EBSD)analysis confirmed twinning-driven grain refinement at low temperatures,while deformation at high temperatures involved grain elongation along shear zones,enabling greater strain accommodation before material failure.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electro...Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electrocatalytic reaction kinetics at the cathode.The integration of light energy into Zn/Sn-air batteries is a promising strategy for enhancing their performance.However,the photothermal and photoelectric effects generate heat in the battery under prolonged solar irradiation,leading to air cathode instability.This paper presents the first design and synthesis of Ni_(2)-1,5-diamino-4,8-dihydroxyanthraquinone(Ni_(2)DDA),an electronically conductiveπ-d conjugated metal-organic framework(MOF).Ni_(2)DDA exhibits both photoelectric and photothermal effects,with an optical band gap of~1.14 eV.Under illumination,Ni_(2)DDA achieves excellent oxygen evolution reaction performance(with an overpotential of 245 mV vs.reversible hydrogen electrode at 10 mA cm^(−2))and photothermal stability.These properties result from the synergy between the photoelectric and photothermal effects of Ni_(2)DDA.Upon integration into Zn/Sn-air batteries,Ni_(2)DDA ensures excellent cycling stability under light and exhibits remarkable performance in high-temperature environments up to 80℃.This study experimentally confirms the stable operation of photo-assisted Zn/Sn-air batteries under high-temperature conditions for the first time and provides novel insights into the application of electronically conductive MOFs in photoelectrocatalysis and photothermal catalysis.展开更多
Within the framework of carbon neutrality,lithium-ion batteries(LIBs)are progressively booming along with the growing utilization of green and clean energy.However,the extensive application of LIBs with limited lifesp...Within the framework of carbon neutrality,lithium-ion batteries(LIBs)are progressively booming along with the growing utilization of green and clean energy.However,the extensive application of LIBs with limited lifespan has brought about a significant recycling dilemma.The traditional hydrometallurgical or pyrometallurgical strategies are not capable to maximize the output value of spent LIBs and minimize the potential environmental hazards.Herein,to alternate the tedious and polluting treatment processes,we propose a high-temperature molten-salt strategy to directly regenerate spent cathodes of LIBs,which can also overcome the barrier of the incomplete defects'restoration with previous low-temperature molten salts.The high-energy and stable medium environment ensures a more thorough and efficient relithiation reaction,and simultaneously provides sufficient driving force for atomic rearrangement and grains secondary growth.In consequence,the regenerated ternary cathode(R-NCM)exhibits significantly enhanced structural stability that effectively suppresses the occurrence of cracks and harmful side reactions.The R-NCM delivers excellent cycling stability,retaining 81.2%of its capacity after 200 cycles at 1 C.This technique further optimizes the traditional eutectic molten-salt approach,broadening its applicability and improving regenerated cathode performance across a wider range of conditions.展开更多
This study investigates the compressive and tensile properties of basalt fiber-reinforced concrete (BFRC) after ultra-low-temperature freeze-thaw cycles. Scanning electron microscope (SEM) analysis was conducted to ex...This study investigates the compressive and tensile properties of basalt fiber-reinforced concrete (BFRC) after ultra-low-temperature freeze-thaw cycles. Scanning electron microscope (SEM) analysis was conducted to examine the deterioration mechanisms caused by freeze-thaw cycles and sulfate erosion. The results show that compressive and tensile strengths increase with basalt fiber dosage. The optimal dosage is 0.2%. With longer exposure to sulfate erosion, both strengths decline significantly. Basalt fibers effectively bridge cracks, control expansion, enhance compactness, and improve concrete performance. Ultra-low-temperature freeze-thaw cycles and sulfate erosion cause rapid crack growth. Sulfate erosion produces crystallization products and expansive substances. These fill cracks, create pressure, and damage the internal structure. Freezing and expansion forces further enlarge voids and cracks. This provides space for expansive substances, worsening concrete deterioration and reducing its performance.展开更多
Lithium-carbon dioxide(Li-CO_(2))batteries using high ion-conductive inorganic molten salt electrolytes have recently attracted much attention due to the high energy density and potential application of carbon neutral...Lithium-carbon dioxide(Li-CO_(2))batteries using high ion-conductive inorganic molten salt electrolytes have recently attracted much attention due to the high energy density and potential application of carbon neutrality.However,the poor Li-ion conductivity of the molten-salt electrolytes at room temperature(RT)makes these batteries lose most of their capacity and power as the temperature falls below 80℃.Here,inspired by the greenhouse effect,we report an RT molten salt Li-CO_(2)battery where solar energy can be efficiently harvested and converted into heat that is further localized on the cathode consisting of plasmonic ruthenium(Ru)catalysts and Li_(2)CO_(3)-based products via a greenhouse-like phenomenon.As a result,the solar-driven molten salt Li-CO_(2)battery demonstrates a larger full discharge/charge capacity of 9.5 mA h/8.1 mA h,and a longer cycle lifespan of 250 cycles at 500 mA/g with a limited capacity of 500 mA h/g at RT than the molten salt Li-CO_(2)battery at 130℃.Notably,the average temperature of the cathode increases by 8℃ after discharge to 0.75 mA h,which indicates the infrared radiation from Ru catalysts can be effectively suppressed by discharged Li_(2)CO_(3)-based products.This battery technology paves the way for developing low-temperature molten salt energy storage devices.展开更多
To achieve good performance for LiFePO4-based batteries operated at a wide temperature range,mixed salts of LiBF4 LiBOB（lithium bis（oxalato）borate） and LiTFSI（lithium bis（trifluoromethanesulfonyl）imide）-LiBOB ...To achieve good performance for LiFePO4-based batteries operated at a wide temperature range,mixed salts of LiBF4 LiBOB（lithium bis（oxalato）borate） and LiTFSI（lithium bis（trifluoromethanesulfonyl）imide）-LiBOB were investigated as alternative lithium salts to LiPF6 in non-aqueous electrolytes.LiFePO4/Li half cells using LiPF6,LiBF4-LiBOB and LiTFSI-LiBOB slats as lithium salts were investigated by galvanostatic cycling,cyclic voltammetry,thermogravimetric analysis.The results show that LiBF4-LiBOB and LiTFSI-LiBOB mixed salts are much more thermally stable than LiPF6.Corrosion of Al foil in the LiTFSI-based electrolytes can be suppressed successfully by the addition of LiBOB as a co-salt.The electrochemical performance of LiBF4-LiBOB and LiTFSI-LiBOB mixed salts based cells are both better than that of LiPF6-based cell.LiTFSI-LiBOB mixed salt based electrolyte is considered to be a very promising electrolyte candidate for Li-ion batteries that will be used in wide-temperature applications.展开更多
A molten salt method was developed to prepare porous La1‐xSrxMn0.8Fe0.2O3 （0≤ x ≤ 0.6） micro‐spheres using hierarchical porous δ‐MnO2 microspheres as a template in eutectic NaNO3‐KNO3. X‐ray diffraction patt...A molten salt method was developed to prepare porous La1‐xSrxMn0.8Fe0.2O3 （0≤ x ≤ 0.6） micro‐spheres using hierarchical porous δ‐MnO2 microspheres as a template in eutectic NaNO3‐KNO3. X‐ray diffraction patterns showed that single phase LaMn0.8Fe0.2O3 with good crystallinity was syn‐thesized at 450℃ after 4 h. Transmission electron microscope images exhibited that the LaMn0.8Fe0.2O3 sample obtained at 450？？ after 4 h possessed a porous spherical morphology com‐posed of aggregated nanocrystallites. Field emission scanning electron microscope images indicated that the growth of the porous LaMn0.8Fe0.2O3 microspheres has two stages. SEM pictures showed that a higher calcination temperature than 450？？ had an adverse effect on the formation of a po‐rous spherical structure. The LaMn0.8Fe0.2O3 sample obtained at 450？？ after 4 h displayed a high BET surface area of 55.73 m2/g with a pore size of 9.38 nm. Fourier transform infrared spectra suggested that Sr2＋ions entered the A sites and induced a decrease of the binding energy between Mn and O. The CO conversion with the La1‐xSrxMn0.8Fe0.2O3 （0≤x≤0.6） samples indicated that the La0.4Sr0.6Mn0.8Fe0.2O3 sample had the best catalytic activity and stability. Further analysis by X‐ray photoelectron spectroscopy demonstrated that Sr2＋doping altered the content of Mn4＋ions, oxygen vacancies and adsorbed oxygen species on the surface, which affected the catalytic performance for CO oxidation.展开更多
A cost-effective carbon-free nanocoating strategy was developed for the synthesis of ultra-fine SnO2 coatingα-Fe2O3 core-shell nanoparticles. This strategy only involves a two-step molten salt reaction at low tempera...A cost-effective carbon-free nanocoating strategy was developed for the synthesis of ultra-fine SnO2 coatingα-Fe2O3 core-shell nanoparticles. This strategy only involves a two-step molten salt reaction at low temperature of 300 °C. The as-preparedα-Fe2O3@SnO2 core-shell nanocomposites show enhanced electrochemical performances than the bareα-Fe2O3 nanoparticles. This involved metal oxide nanocoating method is easy to be carried out, and the heat treatment temperature is much lower than that of other traditional solid-state annealing method and many carbon or metal oxide nanocoating methods. The molten salt method may also be used to produce other metal oxides coating nanostructures as the electrode materials for lithium-ion batteries.展开更多
A new technology for preparation of low cost Mg-Li alloys was studied. The alloys were prepared by electrolysis in molten LiCl-KCl （weight ratio is 1：1） electrolyte with Mg rod severing as the consumed cathode. Mai...A new technology for preparation of low cost Mg-Li alloys was studied. The alloys were prepared by electrolysis in molten LiCl-KCl （weight ratio is 1：1） electrolyte with Mg rod severing as the consumed cathode. Main factors that affect current efficiency were investigated, and optimal electrolysis parameters were obtained. Mg-Li alloys with low lithium Content （about 25%） were prepared by the unique method of a higher post-thermal treatment temperature after electrolysis at low temperature. The results showed that the electrolysis can be carried out at low temperature, which resulted in reducing preparation cost due to energy saving. The new technology for the oreoaration of Mg-Li alloy by electrolysis in molten salt was laroved to be feasible.展开更多
Carbon dioxide(CO_(2))capture using magnesium oxide(MgO)-based adsorbents at intermediate temperatures has been regarded as a very prospective technology for their relatively high adsorption capacity,low cost,and wide...Carbon dioxide(CO_(2))capture using magnesium oxide(MgO)-based adsorbents at intermediate temperatures has been regarded as a very prospective technology for their relatively high adsorption capacity,low cost,and wide availability.During the past few years,great effort has been devoted to the fabrication of molten salts-modified MgO-based adsorbents.The extraordinary progress achieved by coating with molten salts greatly promotes the COcapture capacity of MgO-based adsorbents.Therefore,we feel it necessary to deliver a timely review on this type of COcapturing materials,which will benefit the researchers working in both academic and industrial areas.In this work,we classified the molten saltsmodified MgO adsorbents into four categories:(1)homogenous molten salt-modified MgO adsorbents,(2)molten salt-modified double salts-based MgO adsorbents,(3)mixed molten salts-modified MgO adsorbents,and(4)molten salts-modified MgO-based mixed oxides adsorbents.This contribution critically reviews the recent developments in the synthetic method,adsorption capacity,reaction kinetics,promotion mechanism,operational conditions and regenerability of the molten salts-modified MgO COadsorbents.The challenges and prospects in this promising field of molten salts-modified MgO COadsorbents in real applications are also briefly mentioned.展开更多
Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crac...Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.展开更多
Small modular thorium-based graphite-moderated molten salt reactors (smTMSRs), which combine the advantages of small modular reactors and molten salt reactors, are regarded as a wise development path to speed deployme...Small modular thorium-based graphite-moderated molten salt reactors (smTMSRs), which combine the advantages of small modular reactors and molten salt reactors, are regarded as a wise development path to speed deployment time. In a smTMSR, low enriched uranium and thorium fuels are used in once-through mode, which makes a marked difference in their neutronic properties compared with the case when a conventional molten salt breeder reactor is used. This study investigated the temperature reactivity coefficient (TRC) in a smTMSR, which is mainly affected by the molten salt volume fraction (VF) and the heavy nuclei concentration in the fuel salt (HN). The fourfactor formula method and the reaction rate method were used to indicate the reasons for the TRC change, including the fuel density effect, the fuel Doppler effect, and the graphite thermal scattering effect. The results indicate that only the fuel density has a positive effect on the TRC in the undermoderated region. Thermal scattering from both salt and graphite has a significant negative influence on the TRC in the overmoderated region. The maximal effective multiplication factor, which shows the highest fuel utilization, is located at 10% VF and 12 mol% HN and is still located in the negative TRC region. In addition, on increasing the heavy nuclei amount from 2 mol% HN to 12 mol% HN (VF = 10%), the total TRC undergoes an obvious change from - 11 to - 3 pcm/K, which implies that the change in the HN caused by the fuel feed online should be small to avoid potential trouble in the reactivity control scheme.展开更多
To optimize the temperature coefficient of reactivity(TCR)for a graphite-moderated and liquid-fueled molten salt reactor,the effects of fuel salt composition on the fuel salt temperature coefficient of reactivity(FSTC...To optimize the temperature coefficient of reactivity(TCR)for a graphite-moderated and liquid-fueled molten salt reactor,the effects of fuel salt composition on the fuel salt temperature coefficient of reactivity(FSTC)were investigated in our earlier work.In this study,we aim to provide a more comprehensive analysis of the TCR by considering the effects of the graphite-moderator temperature coefficient of reactivity(MTC).The effects of^235U enrichment and heavy metal(HM)proportion in the salt mixture on the MTC are investigated from the perspective of the six-factor formula based on a full-core model.For the MTC(labeled“αTM”),the temperature coefficient of the fast fission factors(αTM(ε))is positive,while those of the resonance escape probability(αTM(p)),the thermal reproduction factor(αTM(η)),the thermal utilization factor(αTM(f)),and the total non-leakage probability(αTM(A))are negative.The results reveal that the magnitudes ofαTM(ε)andαTM(p)for the MTC are similar.Thus,variations in the MTC with^235U enrichment for different HM proportions are mainly dependent onαTM(η),αTM(A),andαTM(f),but especially on the former two.To obtain a more negative MTC,a lower HM proportion and/or a lower 235U enrichment is recommended.Together with our previous studies on the FSTC,a relatively soft neutron spectrum could strengthen the TCR with a sufficiently negative MTC.展开更多
Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusi...Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed slightly.The dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)increased.With the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical<2111>-<1123>rare-earth(RE)textures.The alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening contributions.These results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.展开更多
基金We gratefully acknowledge financial supports from the Major Program of National Natural Science Foundation of China(Grant No.42090024)the National Natural Science Foundation of China(Grant No.52004322)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2020QE108).
文摘Amide-and alkyl-modified nanosilicas(AANPs)were synthesized and introduced into Xanthan gum(XG)solution,aiming to improve the temperature/salt tolerance and oil recovery.The rheological behaviors of XG/AANP hybrid dispersions were systematically studied at different concentrations,temperatures and inorganic salts.At high temperature(75C)and high salinity(10,000 mg,L1 NaCl),AANPs increase the apparent viscosity and dynamic modulus of the XG solution,and XG/AANP hybrid dispersion exhibits elastic-dominant properties.The most effective concentrations of XG and AANP interacting with each other are 1750 mg·L^(-1) and 0.74 wt%,respectively.The temperature tolerance of XG solution is not satisfactory,and high temperature further weakens the salt tolerance of XG.However,the AANPs significantly enhance the viscoelasticity the XG solution through hydrogen bonds and hydrophobic effect.Under reservoir conditions,XG/AANP hybrid recovers approximately 18.5%more OOIP(original oil in place)than AANP and 11.3%more OOIP than XG.The enhanced oil recovery mechanism of the XG/AANP hybrid is mainly increasing the sweep coefficient,the contribution from the reduction of oil-water interfacial tension is less.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金supported by the National Natural Science Foundation of China (Grant Nos.12074213 and 11574108)the Major Basic Program of Natural Science Foundation of Shandong Province (Grant No.ZR2021ZD01)the Natural Science Foundation of Shandong Province (Grant No.ZR2023MA082)。
文摘In recent years,the research on superconductivity in one-dimensional(1D)materials has been attracting increasing attention due to its potential applications in low-dimensional nanodevices.However,the critical temperature(T_(c))of 1D superconductors is low.In this work,we theoretically investigate the possible high T_(c) superconductivity of(5,5)carbon nanotube(CNT).The pristine(5,5)CNT is a Dirac semimetal and can be modulated into a semiconductor by full hydrogenation.Interestingly,by further hole doping,it can be regulated into a metallic state with the sp3-hybridized𝜎electrons metalized,and a giant Kohn anomaly appears in the optical phonons.The two factors together enhance the electron–phonon coupling,and lead to high-T_(c) superconductivity.When the hole doping concentration of hydrogenated-(5,5)CNT is 2.5 hole/cell,the calculated T_(c) is 82.3 K,exceeding the boiling point of liquid nitrogen.Therefore,the predicted hole-doped hydrogenated-(5,5)CNT provides a new platform for 1D high-T_(c) superconductivity and may have potential applications in 1D nanodevices.
基金supported by the National Key R&D Program of China(No.2024YFC3714200)Guangxi Key Research and Development Program,China(No.Guike AB24010074)+2 种基金the National Natural Science Foundation of China(Nos.22276099,U24A20515 and 22361162668)the Natural Science Foundation of Jiangsu Province(No.BK20240036)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX24_1529).
文摘Temperature has a substantial impact on the emission of biogenic volatile organic compounds(BVOCs).Moder-ate warm temperatures,e.g.,30–40°C,could boost plant metabolism,increasing BVOC emissions.Against the backdrop of global warming,plants emit more BVOCs to cope with thermal stress,leading to elevated concen-trations of tropospheric ozone(O_(3))and secondary organic aerosols(SOA).In recent years,a considerable body of research has explored the interaction between tree species and BVOCs under the influence of various environ-mental factors.Although many studies have examined explored the temperature dependence of BVOC emissions in the past,few studies have conducted a comprehensive and in-depth investigation into the impacts of tempera-ture.This review summarizes the relevant studies on BVOCs in the past decade,including the main biosynthetic pathways,emission observation techniques and emission inventories,as well as how temperature affects isoprene and monoterpene emission rates and the formation of O_(3) and SOA.Our work offers a theoretical foundation and guidance for future efforts to advance the comprehension of BVOC emission characteristics and develop strategies to mitigate secondary pollution.
基金Shanxi Province Graduate Research Practice Innovation Project,No.2023KY465Project on the Reform of Graduate Education and Teaching in Shanxi Province,No.2021YJJG146+1 种基金Research Project of Shanxi Provincial Cultural Relics Bureau,No.22-8-14-1400-119National Key R&D Program of China,No.2021YFB3901300。
文摘Human activities have significantly impacted the land surface temperature(LST),endangering human health;however,the relationship between these two factors has not been adequately quantified.This study comprehensively constructs a Human Activity Intensity(HAI)index and employs the Maximal Information Coefficient,four-quadrant model,and XGBoostSHAP model to investigate the spatiotemporal relationship and influencing factors of HAI-LST in the Yellow River Basin(YRB)from 2000 to 2020.The results indicated that from 2000 to 2020,as HAI and LST increased,the static HAI-LST relationship in the YRB showed a positive correlation that continued to strengthen.This dynamic relationship exhibited conflicting development,with the proportion of coordinated to conflicting regions shifting from 1:4 to 1:2,indicating a reduction in conflict intensity.Notably,only the degree of conflict in the source area decreased significantly,whereas it intensified in the upper and lower reaches.The key factors influencing the HAI-LST relationship include fractional vegetation cover,slope,precipitation,and evapotranspiration,along with region-specific factors such as PM_(2.5),biodiversity,and elevation.Based on these findings,region-specific ecological management strategies have been proposed to mitigate conflict-prone areas and alleviate thermal stress,thereby providing important guidance for promoting harmonious development between humans and nature.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea Program(No.RS-2025-02603127,Innovation Research Center for Zero-carbon Fuel Gas Turbine Design,Manufacture,and Safety)。
文摘Understanding the temperature dependent deformation behavior of Mg alloys is crucial for their expanding use in the aerospace sector.This study investigates the deformation mechanisms of hot-rolled AZ61 Mg alloy under uniaxial tension along rolling direction(RD)and transverse direction(TD)at-50,25,50,and 150℃.Results reveal a transition from high strength with limited elongation at-50℃ to significant softening and maximum ductility at 150℃.TD samples consistently showed 2%-6%higher strength than RD;however,this yield anisotropy diminished at 150℃ due to the shift from twinning to thermally activated slip and recovery.Fractography indicated a change from semi-brittle to fully ductile fracture with increasing temperature.Electron backscattered diffraction(EBSD)analysis confirmed twinning-driven grain refinement at low temperatures,while deformation at high temperatures involved grain elongation along shear zones,enabling greater strain accommodation before material failure.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金supported by the National Natural Science Foundation of China(No.62464010)Spring City Plan-Special Program for Young Talents(K202005007)+2 种基金Yunnan Talents Support Plan for Young Talents(XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(202101BA070001-138)Frontier Research Team of Kunming University 2023.
文摘Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electrocatalytic reaction kinetics at the cathode.The integration of light energy into Zn/Sn-air batteries is a promising strategy for enhancing their performance.However,the photothermal and photoelectric effects generate heat in the battery under prolonged solar irradiation,leading to air cathode instability.This paper presents the first design and synthesis of Ni_(2)-1,5-diamino-4,8-dihydroxyanthraquinone(Ni_(2)DDA),an electronically conductiveπ-d conjugated metal-organic framework(MOF).Ni_(2)DDA exhibits both photoelectric and photothermal effects,with an optical band gap of~1.14 eV.Under illumination,Ni_(2)DDA achieves excellent oxygen evolution reaction performance(with an overpotential of 245 mV vs.reversible hydrogen electrode at 10 mA cm^(−2))and photothermal stability.These properties result from the synergy between the photoelectric and photothermal effects of Ni_(2)DDA.Upon integration into Zn/Sn-air batteries,Ni_(2)DDA ensures excellent cycling stability under light and exhibits remarkable performance in high-temperature environments up to 80℃.This study experimentally confirms the stable operation of photo-assisted Zn/Sn-air batteries under high-temperature conditions for the first time and provides novel insights into the application of electronically conductive MOFs in photoelectrocatalysis and photothermal catalysis.
基金support by National Natural Science Foundation of China(22379166)Natural Science Foundation for Distinguished Young Scholars of Hunan Province(2022JJ10089)Central South University Innovation-Driven Research Programme(2023CXQD034).
文摘Within the framework of carbon neutrality,lithium-ion batteries(LIBs)are progressively booming along with the growing utilization of green and clean energy.However,the extensive application of LIBs with limited lifespan has brought about a significant recycling dilemma.The traditional hydrometallurgical or pyrometallurgical strategies are not capable to maximize the output value of spent LIBs and minimize the potential environmental hazards.Herein,to alternate the tedious and polluting treatment processes,we propose a high-temperature molten-salt strategy to directly regenerate spent cathodes of LIBs,which can also overcome the barrier of the incomplete defects'restoration with previous low-temperature molten salts.The high-energy and stable medium environment ensures a more thorough and efficient relithiation reaction,and simultaneously provides sufficient driving force for atomic rearrangement and grains secondary growth.In consequence,the regenerated ternary cathode(R-NCM)exhibits significantly enhanced structural stability that effectively suppresses the occurrence of cracks and harmful side reactions.The R-NCM delivers excellent cycling stability,retaining 81.2%of its capacity after 200 cycles at 1 C.This technique further optimizes the traditional eutectic molten-salt approach,broadening its applicability and improving regenerated cathode performance across a wider range of conditions.
文摘This study investigates the compressive and tensile properties of basalt fiber-reinforced concrete (BFRC) after ultra-low-temperature freeze-thaw cycles. Scanning electron microscope (SEM) analysis was conducted to examine the deterioration mechanisms caused by freeze-thaw cycles and sulfate erosion. The results show that compressive and tensile strengths increase with basalt fiber dosage. The optimal dosage is 0.2%. With longer exposure to sulfate erosion, both strengths decline significantly. Basalt fibers effectively bridge cracks, control expansion, enhance compactness, and improve concrete performance. Ultra-low-temperature freeze-thaw cycles and sulfate erosion cause rapid crack growth. Sulfate erosion produces crystallization products and expansive substances. These fill cracks, create pressure, and damage the internal structure. Freezing and expansion forces further enlarge voids and cracks. This provides space for expansive substances, worsening concrete deterioration and reducing its performance.
基金supported by the National Natural Science Foundation of China(NSFC,62104099,61921005,62105048,62204117 and 62073299)the Science and Technology Research Program of Chongqing Education Commission(KJQN202100633)+5 种基金the Postdoctoral Science Foundation of China(2021M693768 and 2021M701057)the Key Scientific Research Project in Colleges and Universities of Henan Province,China(21A416001)the Key Laboratory for Special Functional Materials(KEKT2022-06)the Natural Science Foundation of Jiangsu Province(BK20210275 and BK20230498)the support from Jiangsu Province Science Foundation for Youths(BK20210275)National Natural Science Foundation of China(NSFC,62204117)。
文摘Lithium-carbon dioxide(Li-CO_(2))batteries using high ion-conductive inorganic molten salt electrolytes have recently attracted much attention due to the high energy density and potential application of carbon neutrality.However,the poor Li-ion conductivity of the molten-salt electrolytes at room temperature(RT)makes these batteries lose most of their capacity and power as the temperature falls below 80℃.Here,inspired by the greenhouse effect,we report an RT molten salt Li-CO_(2)battery where solar energy can be efficiently harvested and converted into heat that is further localized on the cathode consisting of plasmonic ruthenium(Ru)catalysts and Li_(2)CO_(3)-based products via a greenhouse-like phenomenon.As a result,the solar-driven molten salt Li-CO_(2)battery demonstrates a larger full discharge/charge capacity of 9.5 mA h/8.1 mA h,and a longer cycle lifespan of 250 cycles at 500 mA/g with a limited capacity of 500 mA h/g at RT than the molten salt Li-CO_(2)battery at 130℃.Notably,the average temperature of the cathode increases by 8℃ after discharge to 0.75 mA h,which indicates the infrared radiation from Ru catalysts can be effectively suppressed by discharged Li_(2)CO_(3)-based products.This battery technology paves the way for developing low-temperature molten salt energy storage devices.
基金Project(2013JSJJ027)supported by the Teacher Research Fund of Central South University,China
文摘To achieve good performance for LiFePO4-based batteries operated at a wide temperature range,mixed salts of LiBF4 LiBOB（lithium bis（oxalato）borate） and LiTFSI（lithium bis（trifluoromethanesulfonyl）imide）-LiBOB were investigated as alternative lithium salts to LiPF6 in non-aqueous electrolytes.LiFePO4/Li half cells using LiPF6,LiBF4-LiBOB and LiTFSI-LiBOB slats as lithium salts were investigated by galvanostatic cycling,cyclic voltammetry,thermogravimetric analysis.The results show that LiBF4-LiBOB and LiTFSI-LiBOB mixed salts are much more thermally stable than LiPF6.Corrosion of Al foil in the LiTFSI-based electrolytes can be suppressed successfully by the addition of LiBOB as a co-salt.The electrochemical performance of LiBF4-LiBOB and LiTFSI-LiBOB mixed salts based cells are both better than that of LiPF6-based cell.LiTFSI-LiBOB mixed salt based electrolyte is considered to be a very promising electrolyte candidate for Li-ion batteries that will be used in wide-temperature applications.
基金supported by the National Science Foundation for Young Scientists of China (51202171)~~
文摘A molten salt method was developed to prepare porous La1‐xSrxMn0.8Fe0.2O3 （0≤ x ≤ 0.6） micro‐spheres using hierarchical porous δ‐MnO2 microspheres as a template in eutectic NaNO3‐KNO3. X‐ray diffraction patterns showed that single phase LaMn0.8Fe0.2O3 with good crystallinity was syn‐thesized at 450℃ after 4 h. Transmission electron microscope images exhibited that the LaMn0.8Fe0.2O3 sample obtained at 450？？ after 4 h possessed a porous spherical morphology com‐posed of aggregated nanocrystallites. Field emission scanning electron microscope images indicated that the growth of the porous LaMn0.8Fe0.2O3 microspheres has two stages. SEM pictures showed that a higher calcination temperature than 450？？ had an adverse effect on the formation of a po‐rous spherical structure. The LaMn0.8Fe0.2O3 sample obtained at 450？？ after 4 h displayed a high BET surface area of 55.73 m2/g with a pore size of 9.38 nm. Fourier transform infrared spectra suggested that Sr2＋ions entered the A sites and induced a decrease of the binding energy between Mn and O. The CO conversion with the La1‐xSrxMn0.8Fe0.2O3 （0≤x≤0.6） samples indicated that the La0.4Sr0.6Mn0.8Fe0.2O3 sample had the best catalytic activity and stability. Further analysis by X‐ray photoelectron spectroscopy demonstrated that Sr2＋doping altered the content of Mn4＋ions, oxygen vacancies and adsorbed oxygen species on the surface, which affected the catalytic performance for CO oxidation.
基金Projects(51202297,81372464,51472271)supported by the National Natural Science Foundation of ChinaProject(NCET-12-0554)supported by the New Century Excellent Talents in UniversityProject(2013CB932901)supported by the National Basic Research Program of China
文摘A cost-effective carbon-free nanocoating strategy was developed for the synthesis of ultra-fine SnO2 coatingα-Fe2O3 core-shell nanoparticles. This strategy only involves a two-step molten salt reaction at low temperature of 300 °C. The as-preparedα-Fe2O3@SnO2 core-shell nanocomposites show enhanced electrochemical performances than the bareα-Fe2O3 nanoparticles. This involved metal oxide nanocoating method is easy to be carried out, and the heat treatment temperature is much lower than that of other traditional solid-state annealing method and many carbon or metal oxide nanocoating methods. The molten salt method may also be used to produce other metal oxides coating nanostructures as the electrode materials for lithium-ion batteries.
文摘A new technology for preparation of low cost Mg-Li alloys was studied. The alloys were prepared by electrolysis in molten LiCl-KCl （weight ratio is 1：1） electrolyte with Mg rod severing as the consumed cathode. Main factors that affect current efficiency were investigated, and optimal electrolysis parameters were obtained. Mg-Li alloys with low lithium Content （about 25%） were prepared by the unique method of a higher post-thermal treatment temperature after electrolysis at low temperature. The results showed that the electrolysis can be carried out at low temperature, which resulted in reducing preparation cost due to energy saving. The new technology for the oreoaration of Mg-Li alloy by electrolysis in molten salt was laroved to be feasible.
基金the Fundamental Research Funds for the Central Universities(2016ZCQ03)Beijing Excellent Young Scholar(2015000026833ZK11)+1 种基金the National Natural Science Foundation of China(51622801,51572029,and 51308045)the Xu Guangqi grant
文摘Carbon dioxide(CO_(2))capture using magnesium oxide(MgO)-based adsorbents at intermediate temperatures has been regarded as a very prospective technology for their relatively high adsorption capacity,low cost,and wide availability.During the past few years,great effort has been devoted to the fabrication of molten salts-modified MgO-based adsorbents.The extraordinary progress achieved by coating with molten salts greatly promotes the COcapture capacity of MgO-based adsorbents.Therefore,we feel it necessary to deliver a timely review on this type of COcapturing materials,which will benefit the researchers working in both academic and industrial areas.In this work,we classified the molten saltsmodified MgO adsorbents into four categories:(1)homogenous molten salt-modified MgO adsorbents,(2)molten salt-modified double salts-based MgO adsorbents,(3)mixed molten salts-modified MgO adsorbents,and(4)molten salts-modified MgO-based mixed oxides adsorbents.This contribution critically reviews the recent developments in the synthetic method,adsorption capacity,reaction kinetics,promotion mechanism,operational conditions and regenerability of the molten salts-modified MgO COadsorbents.The challenges and prospects in this promising field of molten salts-modified MgO COadsorbents in real applications are also briefly mentioned.
基金funded by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan(Grant No.AP19680589).
文摘Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.
基金supported by the Chinese TMSR Strategic Pioneer Science and Technology Project(No.XDA02010000)the Frontier Science Key Program of Chinese Academy of Sciences(No.QYZDY-SSW-JSC016)
文摘Small modular thorium-based graphite-moderated molten salt reactors (smTMSRs), which combine the advantages of small modular reactors and molten salt reactors, are regarded as a wise development path to speed deployment time. In a smTMSR, low enriched uranium and thorium fuels are used in once-through mode, which makes a marked difference in their neutronic properties compared with the case when a conventional molten salt breeder reactor is used. This study investigated the temperature reactivity coefficient (TRC) in a smTMSR, which is mainly affected by the molten salt volume fraction (VF) and the heavy nuclei concentration in the fuel salt (HN). The fourfactor formula method and the reaction rate method were used to indicate the reasons for the TRC change, including the fuel density effect, the fuel Doppler effect, and the graphite thermal scattering effect. The results indicate that only the fuel density has a positive effect on the TRC in the undermoderated region. Thermal scattering from both salt and graphite has a significant negative influence on the TRC in the overmoderated region. The maximal effective multiplication factor, which shows the highest fuel utilization, is located at 10% VF and 12 mol% HN and is still located in the negative TRC region. In addition, on increasing the heavy nuclei amount from 2 mol% HN to 12 mol% HN (VF = 10%), the total TRC undergoes an obvious change from - 11 to - 3 pcm/K, which implies that the change in the HN caused by the fuel feed online should be small to avoid potential trouble in the reactivity control scheme.
基金supported by the Chinese TMSR Strategic Pioneer Science and Technology Project(No.XDA02010000)the Frontier Science Key Program of the Chinese Academy of Sciences(No.QYZDY-SSW-JSC016)
文摘To optimize the temperature coefficient of reactivity(TCR)for a graphite-moderated and liquid-fueled molten salt reactor,the effects of fuel salt composition on the fuel salt temperature coefficient of reactivity(FSTC)were investigated in our earlier work.In this study,we aim to provide a more comprehensive analysis of the TCR by considering the effects of the graphite-moderator temperature coefficient of reactivity(MTC).The effects of^235U enrichment and heavy metal(HM)proportion in the salt mixture on the MTC are investigated from the perspective of the six-factor formula based on a full-core model.For the MTC(labeled“αTM”),the temperature coefficient of the fast fission factors(αTM(ε))is positive,while those of the resonance escape probability(αTM(p)),the thermal reproduction factor(αTM(η)),the thermal utilization factor(αTM(f)),and the total non-leakage probability(αTM(A))are negative.The results reveal that the magnitudes ofαTM(ε)andαTM(p)for the MTC are similar.Thus,variations in the MTC with^235U enrichment for different HM proportions are mainly dependent onαTM(η),αTM(A),andαTM(f),but especially on the former two.To obtain a more negative MTC,a lower HM proportion and/or a lower 235U enrichment is recommended.Together with our previous studies on the FSTC,a relatively soft neutron spectrum could strengthen the TCR with a sufficiently negative MTC.
基金supported by the National Science and Technology Major Project,China(No.2019-VI-0004-0118)the National Natural Science Foundation of China(No.51771152)the National Key R&D Program of China(No.2018YFB1106800)。
文摘Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed slightly.The dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)increased.With the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical<2111>-<1123>rare-earth(RE)textures.The alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening contributions.These results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.
