As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from di...As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from different studies,this study constructs a refined block model(including Qilian,Alxa,Ordos,Xining,Haiyuan,and Lanzhou blocks)and uses the grid search and simulated annealing methods to invert GPS data for slip rate and locking degree of the Haiyuan fault zone.The results are as follows:(1)The sinistral slip rates in the western,middle,and eastern segments are 4.93-5.22 mm/a,1.52-4.94 mm/a,and 0.43-1.18 mm/a,decreasing eastward on the whole,while the compression rates are 0.45-1.26 mm/a,0.58-2.62 mm/a,and3.52-4.48 mm/a,increasing eastward on the whole.(2)The locking depth of the western segment increases from about 5 km to about 20 km eastward;the middle segment decreases and then increases eastward;the eastern segment concentrates at about 20 km(PHI is about 0.86).(3)The slip deficit is relatively higher in the Lenglongling,Jinqianghe,Maomaoshan,and Liupanshan faults(averaging about 3.42 mm/a,4.16 mm/a,4.23 mm/a,and 3.43 mm/a within 20 km).(4)The Qilian,Alxa,Xining,Lanzhou,and Haiyuan blocks rotate clockwise,while the Ordos block rotates counterclockwise.Additionally,by comparing different block models,the Haiyuan block should be considered independently.The Haiyuan fault zone adjusts surrounding block movements and uplifts Liupanshan mountain tectonically.The results can provide important references for understanding the regional earthquake risk and deformation mechanism.展开更多
Starting from the utilization and protection of local knowledge, with the performance prism as the framework, the evaluation index system of tourist satisfaction degree was established. The weight was determined by us...Starting from the utilization and protection of local knowledge, with the performance prism as the framework, the evaluation index system of tourist satisfaction degree was established. The weight was determined by using AHP method. Finally, the investigating result was judged with fuzzy comprehensive evaluation method, the evaluation model of tourist satisfaction degree in western tourist area was built, and the case study was carried out. With Lijiang in Yunnan Province as example, according to AHP method, five dimensions weight of the performance prism, various KPI weight and consistency were obtained, fuzzy evaluation on tourist satisfaction degree was conducted. The results showed that the overall was satisfactory, but there were still some problems. Aiming at the utilization and protection of local knowledge, some corresponding countermeasures were put forward which will benefit for further development of tourism in Lijiang of Yunnan Province.展开更多
A modified two-degrees-of-freedom( M-TDOF) internal model control( IMC) method is proposed for non-square systems with multiple time delays and right-half-plane( RHP) zeros. In this method,pseudo-inverse is introduced...A modified two-degrees-of-freedom( M-TDOF) internal model control( IMC) method is proposed for non-square systems with multiple time delays and right-half-plane( RHP) zeros. In this method,pseudo-inverse is introduced to design the internal model controller,and a desired closed-loop transfer function is designed to eliminate the unrealizable factors of the derived controller. In addition,set-point tracking and load-disturbance rejection of each process are separately controlled by two controllers. The simulation results show that in addition to high decoupling performance and robustness,the proposed control method also effectively improves loaddisturbance rejection and simultaneously optimizes the input tracking performance and disturbance rejection performance by selecting the parameters of controllers. Furthermore,the higher tolerance of model mismatch is achieved in this paper.展开更多
This paper presents an index system and a method for calculating the comprehensive index of land-use degree. The latest data form two projects titled "Remote sensing Macro Investigation and Dynamic Study of Natio...This paper presents an index system and a method for calculating the comprehensive index of land-use degree. The latest data form two projects titled "Remote sensing Macro Investigation and Dynamic Study of National Resources and Environment" and "Resources and Environment Database of China" have been fully applied. In addition, this paper analyzes the regularity of the regional differentiation of land-use degree in China and the socio-economic and physical factors which affect the change of land-use degree in China. The "polar" model and the "longitude-distance" model of land-use degree of China are also developed.展开更多
Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performanc...Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings.Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter(IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System(SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.展开更多
The condition of rotor system must be assessed in order to develop condition-based maintenance for rotating machinery. It is determined by multiple variables such as unbalance degree, misalignment degree, the amount o...The condition of rotor system must be assessed in order to develop condition-based maintenance for rotating machinery. It is determined by multiple variables such as unbalance degree, misalignment degree, the amount of bending deformation of the shaft, occurrence of shaft crack of rotor system and so on. The estimation of the degrees of unbalance and misalignment in flexible coupling-rotor system is discussed. The model-based approach is employed to solve this problem. The models of the equivalent external loads for unbalance and misalignment are derived and analyzed. Then, the degrees of unbalance and misalignment are estimated by analyzing the components of the equivalent external loads of which the frequencies are equal to the 1 and 2 times running frequency respectively. The equivalent external loads are calculated according to the dynamic equation of the original rotor system and the differences between the dynamical responses in normal case and the vibrations when the degree of unbalance or misalignment or both changes. The denoise method based on bandpass filter is used to decrease the effect of noise on the estimation accuracy. The numerical examples are given to show that the proposed approach can estimate the degrees of unbalance and misalignment of the flexible coupling-rotor system accurately.展开更多
According to the characteristics of the large time delay,nonlinearity and the great inertia of temperature control system in biomass pyrolysis reactor,a two-degree-of-freedom Smith internal model controller based on f...According to the characteristics of the large time delay,nonlinearity and the great inertia of temperature control system in biomass pyrolysis reactor,a two-degree-of-freedom Smith internal model controller based on fuzzy control is proposed.Firstly,the mathematical model of the temperature control system is established by using the step response method,and then the two-degree-of-freedom Smith internal model controller is designed,and the good tracking performance and disturbance suppression performance can be obtained by designing the set value tracking controller and interference rejection capability.Secondly,the fuzzy control algorithm is used to realize the on-line tuning of the control parameters of the two-degree-of-freedom Smith internal model algorithm.The simulation results show that,compared with the traditional internal model control,fuzzy internal model PID control and two-degree-of-freedom Smith internal model control,the algorithm proposed in this paper improves the influence of lag time on the control system,realizes the separation control of set point tracking and anti-jamming performance and the self-tuning of control parameters,and improves the control performance of the system.展开更多
Identifying critical nodes is a pivotal research topic in network science,yet the efficient and accurate detection of highly influential nodes remains a challenge.Existing centrality measures predominantly rely on loc...Identifying critical nodes is a pivotal research topic in network science,yet the efficient and accurate detection of highly influential nodes remains a challenge.Existing centrality measures predominantly rely on local or global topological structures,often overlooking indirect connections and their interaction strengths.This leads to imprecise assessments of node importance,limiting practical applications.To address this,we propose a novel node centrality measure,termed six-degree gravity centrality(SDGC),grounded in the six degrees of separation theory,for the precise identification of influential nodes in networks.Specifically,we introduce a set of node influence parameters—node mass,dynamic interaction distance,and attraction coefficient—to enhance the gravity model.Node mass is calculated by integrating K-shell and closeness centrality measures.The dynamic interaction distance,informed by the six-degrees of separation theory,is determined through path searches within six hops between node pairs.The attraction coefficient is derived from the difference in K-shell values between nodes.By integrating these parameters,we develop an improved gravity model to quantify node influence.Experiments conducted on nine real-world networks demonstrate that SDGC significantly outperforms nine existing classical and state-of-the-art methods in identifying the influential nodes.展开更多
The interaction between regular waves and an oscillating wave energy converter(WEC)in front of a vertical seawall is investigated using a 2D analytical model.A three-degree of freedom(DOF)WEC and a WEC hinged to the s...The interaction between regular waves and an oscillating wave energy converter(WEC)in front of a vertical seawall is investigated using a 2D analytical model.A three-degree of freedom(DOF)WEC and a WEC hinged to the seawall(constrained to pitch mode)are considered to examine the influence of the DOF of the WEC on the wave energy extraction performance.Results show that the piston-mode water resonance in the gap and the coupled WEC and water column resonant motion significantly influence the wave energy extraction efficiency.At low frequency,the case with a 3-DOF WEC has a broader high-efficiency bandwidth than that with a heaving WEC.However,3-DOF WEC exhibits worse performance at high frequencies.The frequency response of the wave energy capture width ratio(CWR)for the pitching WEC case shows a trimodal trend under the specified conditions.It showcases the best overall wave energy extraction performance in terms of the high-efficiency bandwidth.Furthermore,a parametric study indicates that the gap distance between the WEC and the seawall has tremendous effects on the CWR of both cases.As the position of the hinge point of the pitching WEC changes,the CWR at the low and high frequencies shows opposite trends.展开更多
Flexural toppling occurs when a series of layered rock masses bend towards their free face.It is important to evaluate the maximum bending degree and the requirement of supports of flexural toppling rock mass to preve...Flexural toppling occurs when a series of layered rock masses bend towards their free face.It is important to evaluate the maximum bending degree and the requirement of supports of flexural toppling rock mass to prevent rock mass cracking and even failure leading to a landslide.Based on the rock tensile strain-softening model,this study proposes a method for calculating the maximum curvature(C_(ppmax))of flexural toppling rock masses.By applying this method to calculate Cppmax of 9 types of rock masses with different hardness and rock layer thickness,some conclusions are drawn:(1)the internal key factors affecting C_(ppmax)are E^(⋆)(E^(⋆)=E_(ss)/E_(0),where E_(0)and E_(ss)are the mean deformation moduli of the rock before and after reaching its peak tensile strength,respectively),the strainεt corresponding to the tensile strength of rock,and the thickness(h)of rock layers;(2)hard rock layers are more likely to develop into block toppling than soft rock layers;and(3)thin rock layers are more likely to remain in flexural toppling state than thick rock layers.In addition,it is found that C_(ppmax)for flexural toppling rock masses composed of bedded rocks such as gneiss is related to the tensile direction.展开更多
This study lies within the scope of a strategy of prevention from inundations by the contribution of new technology in stage of the hydrological and geomorphological modeling for protection against the floods in a med...This study lies within the scope of a strategy of prevention from inundations by the contribution of new technology in stage of the hydrological and geomorphological modeling for protection against the floods in a medium of weak at the average risk in South-eastern Tunisia, starting from the catchment area of Zeuss-Koutine. Considering the lack of studies we were brought to extract the area catchment in question, and to deduce its geomorphological and hydrometric characteristics, starting from the digital terrain model. We could obtain, by overlaying maps of slopes, indices and flows, the hydrological zonation of the catchment area of Zeuss-Koutine. The hydrological study of the basin’s slopes of Zeuss-Koutine is not lying out that very little physical information rests primarily on cartographic processes. The use of the latter can be regarded as an allowing indicator, by the crossing of the explanatory factors of the surface flow (slopes and direction of flow), to define a set of homogeneous hydrological zones in the level of the hydrological characteristics (average slopes, altitudes, roughness, etc). It is mainly a question of better taking account of the physical properties of the basins slopes.展开更多
By using Porter's Five Forces Model,and from 5 aspects of individual farmer,purchaser,new entrant,substitute and the enterprise of the same trade,I analyze the leading enterprise in Guizhou Province-LaoGanMa,so as...By using Porter's Five Forces Model,and from 5 aspects of individual farmer,purchaser,new entrant,substitute and the enterprise of the same trade,I analyze the leading enterprise in Guizhou Province-LaoGanMa,so as to reveal the commonality and particularity reflected from the competition degree of LaoGanMa as follows:LaoGanMa has absolute dominance over material purchase;the purchasers'recognition on the quality of LaoGanMa,bearing capacity of sales price and habitual consumption allay consumers'ability to bargain;as for the problems of substitutes,the threat of new entrants and competition of the same trading,LaoGanMa has not done enough.The thesis formulates the competitive strategy conducive to development,like differentiation strategy,Cost-leadership strategy and brand strategy,in order to promote the development of processing industries of agricultural products.展开更多
This paper presents a novel evaluation model of the customer satisfaction degree （CSD） in logistics based on support vector machine （SVM）. Firstly, the relation between the suppliers and the customers is analyzed....This paper presents a novel evaluation model of the customer satisfaction degree （CSD） in logistics based on support vector machine （SVM）. Firstly, the relation between the suppliers and the customers is analyzed. Seondly, the evaluation index system and fuzzy quantitative methods are provided. Thirdly, the CSD evaluation system including eight indexes and three ranks based on one-against-one mode of SVM is built, last simulation experint is presented to illustrate the theoretical results.展开更多
Degree of freedom(DOF)is a key indicator for spatial multiplexing layers of a wireless channel.Traditionally,the channel of a multiple-input multiple-output(MIMO)half-wavelength dipole array has a DOF that equals the ...Degree of freedom(DOF)is a key indicator for spatial multiplexing layers of a wireless channel.Traditionally,the channel of a multiple-input multiple-output(MIMO)half-wavelength dipole array has a DOF that equals the antenna number.However,recent studies suggest that the DOF could be less than the antenna number when strong mutual coupling is considered.We utilize a mutual-coupling-compliant channel model to investigate the DOF of the holographic MIMO(HMIMO)channel and give a upper bound of the DOF with strong mutual coupling.Our numerical simulations demonstrate that a dense array can support more DOF per unit aperture as compared with a half-wavelength MIMO system.展开更多
Future changes of heating degree days （HDD） and cooling degree days （CDD） in the 21st century with and without considering populationfactor are investigated based on four sets of climate change simulations over Ea...Future changes of heating degree days （HDD） and cooling degree days （CDD） in the 21st century with and without considering populationfactor are investigated based on four sets of climate change simulations over East Asia using the regional climate model version 4.4 （RegCM4.4）driven by the global models of CSIRO-Mk3-6-0, EC-EARTH, HadGEM2-ES, and MPI-ESM-MR. Under global warming of 1.5℃, 2℃, 3℃,and 4℃, significant decrease of HDD can be found over China without considering population factor, with greater decrease over high elevationand high latitude regions, including the Tibetan Plateau, the northern part of Northeast China, and Northwest China; while population-weightedHDD increased in areas where population will increase in the future, such as Beijing, Tianjin, parts of southern Hebei, northern Shandong andHenan provinces. Similarly, the CDD projections with and without considering population factor are largely different. Specifically, withoutconsidering population, increase of CDD were observed over most parts of China except the Tibetan Plateau where the CDD remained zerobecause of the cold climate even under global warming; while considering population factor, the future CDD decreases in South China andincreases in North China, the Sichuan Basin, and the southeastern coastal areas, which is directly related to the population changes. The differentfuture changes of HDD and CDD when considering and disregarding the effects of population show that population distribution plays animportant role in energy consumption, which should be considered in future research.展开更多
A novel compliant mechanism with RPR degrees of freedom(DOF)is proposed where R and P represent rotation and translation DOFs,respectively.The proposed compliant mechanism is obtained from dimension synthesizing a 2-R...A novel compliant mechanism with RPR degrees of freedom(DOF)is proposed where R and P represent rotation and translation DOFs,respectively.The proposed compliant mechanism is obtained from dimension synthesizing a 2-RPU-UPR rigid parallel mechanism with the method of optimization of motion/force transfer characteristic.R,P and U represent rotation,translation and universal pairs,respectively.Firstly,inverse kinematics and Jacobian matrix are analyzed for the dimensional synthesis.Then,output transmission indexes of branches in the parallel mechanism are given.Dimensional synthesis is completed based on the normalized design parameter.And optimization of flexure joints based on constrained energy is carried out.Afterwards,the novel compliant mechanism is obtained by direct replacing method.Mechanical model of the compliant mechanism including static stiffness and input stiffness is built based on the pseudo-rigid body modeling method and virtual work principle.Finally,FEA simulation by Ansys Workbench is carried out to verify DOF,effectiveness of the dimension synthesis,and compliant model.Optimization of motion/force transfer characteristic is first applied for the design of compliant mechanisms to suppress drift of rotation axis in the paper.展开更多
This paper introduces the method of data envelopment analysis （DEA） for evaluation of the degree of harmony between water resources and economic development of the water conservancy area of China＇s South-to-North W...This paper introduces the method of data envelopment analysis （DEA） for evaluation of the degree of harmony between water resources and economic development of the water conservancy area of China＇s South-to-North Water Diversion Project （SNWDP）. For this evaluation, a super-efficiency DEA （SEDEA） model was developed based on the super-efficiency method. To verify the applicability of the SEDEA model, both the SEDEA model and a normal-efficiency DEA （NEDEA） model were used to evaluate the degree of harmony between water resources and economic development of typical cities in the SNWDP water conservancy area. The results show that the SEDEA model ranks the degree of harmony of typical cities more efficiently than the NEDEA model, and thus can better evaluate the degree of harmony between water resources and economic development of different cities than the NEDEA model. Furthermore, the SEDEA model can be applied as an operational research tool in regional water resources management.展开更多
In view of the present situation of measuring a green residence just by energy saving and environmental protection,we propose that we should build the rural residence more from the farmer's view and set up an eval...In view of the present situation of measuring a green residence just by energy saving and environmental protection,we propose that we should build the rural residence more from the farmer's view and set up an evaluation system based on farmers satisfaction.A total of 16 factors affecting the farmers'satisfaction degree of green energy saving rebuilding of rural residence are selected.Questionnaire survey on 110 peasant households is carried out under different situations in Guanzhong region in Shaanxi Province,so as to obtain the importance score of evaluation index.During constructing the evaluation system for farmers'satisfaction degree,Factor Analysis Method is used to classify the related influencing factors.Subjective analysis of Analytic Hierarchy Process and the objective analysis of Factor Analysis Method are combined together to determine the weights of factors at different grades.Then,the final evaluation model is obtained,which provides guidance for the further green energy saving rebuilding of rural residence in China.展开更多
基金supported by the National Natural Science Foundation of China(42474003,42074007)the Fundamental Research Funds for the Central Universities(2042023kfyq01)。
文摘As a major fault in the northeastern Qinghai-Xizang Plateau,the Haiyuan fault zone is important for understanding the regional deformation.Aiming at the differences in the slip rate and locking degree obtained from different studies,this study constructs a refined block model(including Qilian,Alxa,Ordos,Xining,Haiyuan,and Lanzhou blocks)and uses the grid search and simulated annealing methods to invert GPS data for slip rate and locking degree of the Haiyuan fault zone.The results are as follows:(1)The sinistral slip rates in the western,middle,and eastern segments are 4.93-5.22 mm/a,1.52-4.94 mm/a,and 0.43-1.18 mm/a,decreasing eastward on the whole,while the compression rates are 0.45-1.26 mm/a,0.58-2.62 mm/a,and3.52-4.48 mm/a,increasing eastward on the whole.(2)The locking depth of the western segment increases from about 5 km to about 20 km eastward;the middle segment decreases and then increases eastward;the eastern segment concentrates at about 20 km(PHI is about 0.86).(3)The slip deficit is relatively higher in the Lenglongling,Jinqianghe,Maomaoshan,and Liupanshan faults(averaging about 3.42 mm/a,4.16 mm/a,4.23 mm/a,and 3.43 mm/a within 20 km).(4)The Qilian,Alxa,Xining,Lanzhou,and Haiyuan blocks rotate clockwise,while the Ordos block rotates counterclockwise.Additionally,by comparing different block models,the Haiyuan block should be considered independently.The Haiyuan fault zone adjusts surrounding block movements and uplifts Liupanshan mountain tectonically.The results can provide important references for understanding the regional earthquake risk and deformation mechanism.
基金Supported by 2008 National Social Science Fund (08BMZ042)~~
文摘Starting from the utilization and protection of local knowledge, with the performance prism as the framework, the evaluation index system of tourist satisfaction degree was established. The weight was determined by using AHP method. Finally, the investigating result was judged with fuzzy comprehensive evaluation method, the evaluation model of tourist satisfaction degree in western tourist area was built, and the case study was carried out. With Lijiang in Yunnan Province as example, according to AHP method, five dimensions weight of the performance prism, various KPI weight and consistency were obtained, fuzzy evaluation on tourist satisfaction degree was conducted. The results showed that the overall was satisfactory, but there were still some problems. Aiming at the utilization and protection of local knowledge, some corresponding countermeasures were put forward which will benefit for further development of tourism in Lijiang of Yunnan Province.
基金Sponsored by the Fundamental Research Funds for the Central Universities(Grant No.N110304008)the National Natural Science Foundation of China(Grant No.61374137)
文摘A modified two-degrees-of-freedom( M-TDOF) internal model control( IMC) method is proposed for non-square systems with multiple time delays and right-half-plane( RHP) zeros. In this method,pseudo-inverse is introduced to design the internal model controller,and a desired closed-loop transfer function is designed to eliminate the unrealizable factors of the derived controller. In addition,set-point tracking and load-disturbance rejection of each process are separately controlled by two controllers. The simulation results show that in addition to high decoupling performance and robustness,the proposed control method also effectively improves loaddisturbance rejection and simultaneously optimizes the input tracking performance and disturbance rejection performance by selecting the parameters of controllers. Furthermore,the higher tolerance of model mismatch is achieved in this paper.
文摘This paper presents an index system and a method for calculating the comprehensive index of land-use degree. The latest data form two projects titled "Remote sensing Macro Investigation and Dynamic Study of National Resources and Environment" and "Resources and Environment Database of China" have been fully applied. In addition, this paper analyzes the regularity of the regional differentiation of land-use degree in China and the socio-economic and physical factors which affect the change of land-use degree in China. The "polar" model and the "longitude-distance" model of land-use degree of China are also developed.
基金co-supported by the Beijing Natural Science Foundation of China (No. 4194074)the National Key R&D Program of China (No. 2017YFC1600605)+1 种基金the Shandong Provincial Natural Science Foundation of China (No. ZR2018BF016)the Beijing Municipal Education Commission Research Program-General Project of China (No. KM201910011011)
文摘Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings.Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter(IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System(SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.
基金supported by National Natural Science Foundation of China(Grant No. 10772061)Heilongjiang Provincial Natural Science Foundation of China(Grant No. ZJG0704)
文摘The condition of rotor system must be assessed in order to develop condition-based maintenance for rotating machinery. It is determined by multiple variables such as unbalance degree, misalignment degree, the amount of bending deformation of the shaft, occurrence of shaft crack of rotor system and so on. The estimation of the degrees of unbalance and misalignment in flexible coupling-rotor system is discussed. The model-based approach is employed to solve this problem. The models of the equivalent external loads for unbalance and misalignment are derived and analyzed. Then, the degrees of unbalance and misalignment are estimated by analyzing the components of the equivalent external loads of which the frequencies are equal to the 1 and 2 times running frequency respectively. The equivalent external loads are calculated according to the dynamic equation of the original rotor system and the differences between the dynamical responses in normal case and the vibrations when the degree of unbalance or misalignment or both changes. The denoise method based on bandpass filter is used to decrease the effect of noise on the estimation accuracy. The numerical examples are given to show that the proposed approach can estimate the degrees of unbalance and misalignment of the flexible coupling-rotor system accurately.
基金financial support was given by Tianjin Technical Expert Project(19JCTPJC59300)
文摘According to the characteristics of the large time delay,nonlinearity and the great inertia of temperature control system in biomass pyrolysis reactor,a two-degree-of-freedom Smith internal model controller based on fuzzy control is proposed.Firstly,the mathematical model of the temperature control system is established by using the step response method,and then the two-degree-of-freedom Smith internal model controller is designed,and the good tracking performance and disturbance suppression performance can be obtained by designing the set value tracking controller and interference rejection capability.Secondly,the fuzzy control algorithm is used to realize the on-line tuning of the control parameters of the two-degree-of-freedom Smith internal model algorithm.The simulation results show that,compared with the traditional internal model control,fuzzy internal model PID control and two-degree-of-freedom Smith internal model control,the algorithm proposed in this paper improves the influence of lag time on the control system,realizes the separation control of set point tracking and anti-jamming performance and the self-tuning of control parameters,and improves the control performance of the system.
基金supported by the National Natural Science Foundation of China(Grant No.62173065)the Natural Science Foundation of Beijing(Grant No.4242040)+1 种基金the Intelligent Policing and National Security Risk Management Laboratory Open Topics for the year 2025(Grant No.ZHKFYB2503)the Intelligent Policing and National Security Risk Management Laboratory Open Topics for the year 2024(Grant No.ZHKFZD2401).
文摘Identifying critical nodes is a pivotal research topic in network science,yet the efficient and accurate detection of highly influential nodes remains a challenge.Existing centrality measures predominantly rely on local or global topological structures,often overlooking indirect connections and their interaction strengths.This leads to imprecise assessments of node importance,limiting practical applications.To address this,we propose a novel node centrality measure,termed six-degree gravity centrality(SDGC),grounded in the six degrees of separation theory,for the precise identification of influential nodes in networks.Specifically,we introduce a set of node influence parameters—node mass,dynamic interaction distance,and attraction coefficient—to enhance the gravity model.Node mass is calculated by integrating K-shell and closeness centrality measures.The dynamic interaction distance,informed by the six-degrees of separation theory,is determined through path searches within six hops between node pairs.The attraction coefficient is derived from the difference in K-shell values between nodes.By integrating these parameters,we develop an improved gravity model to quantify node influence.Experiments conducted on nine real-world networks demonstrate that SDGC significantly outperforms nine existing classical and state-of-the-art methods in identifying the influential nodes.
基金supported by the Key R&D Program of Shandong Province,China(No.2021ZLGX04)the National Natural Science Foundation of China(No.52171284)。
文摘The interaction between regular waves and an oscillating wave energy converter(WEC)in front of a vertical seawall is investigated using a 2D analytical model.A three-degree of freedom(DOF)WEC and a WEC hinged to the seawall(constrained to pitch mode)are considered to examine the influence of the DOF of the WEC on the wave energy extraction performance.Results show that the piston-mode water resonance in the gap and the coupled WEC and water column resonant motion significantly influence the wave energy extraction efficiency.At low frequency,the case with a 3-DOF WEC has a broader high-efficiency bandwidth than that with a heaving WEC.However,3-DOF WEC exhibits worse performance at high frequencies.The frequency response of the wave energy capture width ratio(CWR)for the pitching WEC case shows a trimodal trend under the specified conditions.It showcases the best overall wave energy extraction performance in terms of the high-efficiency bandwidth.Furthermore,a parametric study indicates that the gap distance between the WEC and the seawall has tremendous effects on the CWR of both cases.As the position of the hinge point of the pitching WEC changes,the CWR at the low and high frequencies shows opposite trends.
基金funded by the National Natural Science Foundation of China(No.41972264)Zhejiang Provincial Natural Science Foundation of China(No.LR22E080002)the Key R&D Project of Zhejiang Province(No.2021C03159).
文摘Flexural toppling occurs when a series of layered rock masses bend towards their free face.It is important to evaluate the maximum bending degree and the requirement of supports of flexural toppling rock mass to prevent rock mass cracking and even failure leading to a landslide.Based on the rock tensile strain-softening model,this study proposes a method for calculating the maximum curvature(C_(ppmax))of flexural toppling rock masses.By applying this method to calculate Cppmax of 9 types of rock masses with different hardness and rock layer thickness,some conclusions are drawn:(1)the internal key factors affecting C_(ppmax)are E^(⋆)(E^(⋆)=E_(ss)/E_(0),where E_(0)and E_(ss)are the mean deformation moduli of the rock before and after reaching its peak tensile strength,respectively),the strainεt corresponding to the tensile strength of rock,and the thickness(h)of rock layers;(2)hard rock layers are more likely to develop into block toppling than soft rock layers;and(3)thin rock layers are more likely to remain in flexural toppling state than thick rock layers.In addition,it is found that C_(ppmax)for flexural toppling rock masses composed of bedded rocks such as gneiss is related to the tensile direction.
文摘This study lies within the scope of a strategy of prevention from inundations by the contribution of new technology in stage of the hydrological and geomorphological modeling for protection against the floods in a medium of weak at the average risk in South-eastern Tunisia, starting from the catchment area of Zeuss-Koutine. Considering the lack of studies we were brought to extract the area catchment in question, and to deduce its geomorphological and hydrometric characteristics, starting from the digital terrain model. We could obtain, by overlaying maps of slopes, indices and flows, the hydrological zonation of the catchment area of Zeuss-Koutine. The hydrological study of the basin’s slopes of Zeuss-Koutine is not lying out that very little physical information rests primarily on cartographic processes. The use of the latter can be regarded as an allowing indicator, by the crossing of the explanatory factors of the surface flow (slopes and direction of flow), to define a set of homogeneous hydrological zones in the level of the hydrological characteristics (average slopes, altitudes, roughness, etc). It is mainly a question of better taking account of the physical properties of the basins slopes.
文摘By using Porter's Five Forces Model,and from 5 aspects of individual farmer,purchaser,new entrant,substitute and the enterprise of the same trade,I analyze the leading enterprise in Guizhou Province-LaoGanMa,so as to reveal the commonality and particularity reflected from the competition degree of LaoGanMa as follows:LaoGanMa has absolute dominance over material purchase;the purchasers'recognition on the quality of LaoGanMa,bearing capacity of sales price and habitual consumption allay consumers'ability to bargain;as for the problems of substitutes,the threat of new entrants and competition of the same trading,LaoGanMa has not done enough.The thesis formulates the competitive strategy conducive to development,like differentiation strategy,Cost-leadership strategy and brand strategy,in order to promote the development of processing industries of agricultural products.
文摘This paper presents a novel evaluation model of the customer satisfaction degree （CSD） in logistics based on support vector machine （SVM）. Firstly, the relation between the suppliers and the customers is analyzed. Seondly, the evaluation index system and fuzzy quantitative methods are provided. Thirdly, the CSD evaluation system including eight indexes and three ranks based on one-against-one mode of SVM is built, last simulation experint is presented to illustrate the theoretical results.
基金supported in part by National Key Research and Develop⁃ment Program of China under Grant No.2020YFB1807600.
文摘Degree of freedom(DOF)is a key indicator for spatial multiplexing layers of a wireless channel.Traditionally,the channel of a multiple-input multiple-output(MIMO)half-wavelength dipole array has a DOF that equals the antenna number.However,recent studies suggest that the DOF could be less than the antenna number when strong mutual coupling is considered.We utilize a mutual-coupling-compliant channel model to investigate the DOF of the holographic MIMO(HMIMO)channel and give a upper bound of the DOF with strong mutual coupling.Our numerical simulations demonstrate that a dense array can support more DOF per unit aperture as compared with a half-wavelength MIMO system.
文摘Future changes of heating degree days （HDD） and cooling degree days （CDD） in the 21st century with and without considering populationfactor are investigated based on four sets of climate change simulations over East Asia using the regional climate model version 4.4 （RegCM4.4）driven by the global models of CSIRO-Mk3-6-0, EC-EARTH, HadGEM2-ES, and MPI-ESM-MR. Under global warming of 1.5℃, 2℃, 3℃,and 4℃, significant decrease of HDD can be found over China without considering population factor, with greater decrease over high elevationand high latitude regions, including the Tibetan Plateau, the northern part of Northeast China, and Northwest China; while population-weightedHDD increased in areas where population will increase in the future, such as Beijing, Tianjin, parts of southern Hebei, northern Shandong andHenan provinces. Similarly, the CDD projections with and without considering population factor are largely different. Specifically, withoutconsidering population, increase of CDD were observed over most parts of China except the Tibetan Plateau where the CDD remained zerobecause of the cold climate even under global warming; while considering population factor, the future CDD decreases in South China andincreases in North China, the Sichuan Basin, and the southeastern coastal areas, which is directly related to the population changes. The differentfuture changes of HDD and CDD when considering and disregarding the effects of population show that population distribution plays animportant role in energy consumption, which should be considered in future research.
基金National Natural Science Foundation of China(Grant No.51975007).
文摘A novel compliant mechanism with RPR degrees of freedom(DOF)is proposed where R and P represent rotation and translation DOFs,respectively.The proposed compliant mechanism is obtained from dimension synthesizing a 2-RPU-UPR rigid parallel mechanism with the method of optimization of motion/force transfer characteristic.R,P and U represent rotation,translation and universal pairs,respectively.Firstly,inverse kinematics and Jacobian matrix are analyzed for the dimensional synthesis.Then,output transmission indexes of branches in the parallel mechanism are given.Dimensional synthesis is completed based on the normalized design parameter.And optimization of flexure joints based on constrained energy is carried out.Afterwards,the novel compliant mechanism is obtained by direct replacing method.Mechanical model of the compliant mechanism including static stiffness and input stiffness is built based on the pseudo-rigid body modeling method and virtual work principle.Finally,FEA simulation by Ansys Workbench is carried out to verify DOF,effectiveness of the dimension synthesis,and compliant model.Optimization of motion/force transfer characteristic is first applied for the design of compliant mechanisms to suppress drift of rotation axis in the paper.
基金supported by the Fundamental Research Funds for the Central Universities (Grant No. 2010B25814)the Philosophy and Social Science Foundation of Hohai University (Grant No. 2007402011)+1 种基金the Philosophy and Social Science Foundation of Jiangsu Province (Grant No. 07EYC059)a special project of the Ministry of Water Resources of the People's Republic of China (Grant No. 5006518023)
文摘This paper introduces the method of data envelopment analysis （DEA） for evaluation of the degree of harmony between water resources and economic development of the water conservancy area of China＇s South-to-North Water Diversion Project （SNWDP）. For this evaluation, a super-efficiency DEA （SEDEA） model was developed based on the super-efficiency method. To verify the applicability of the SEDEA model, both the SEDEA model and a normal-efficiency DEA （NEDEA） model were used to evaluate the degree of harmony between water resources and economic development of typical cities in the SNWDP water conservancy area. The results show that the SEDEA model ranks the degree of harmony of typical cities more efficiently than the NEDEA model, and thus can better evaluate the degree of harmony between water resources and economic development of different cities than the NEDEA model. Furthermore, the SEDEA model can be applied as an operational research tool in regional water resources management.
基金Supported by the Key Scientific and Technological Innovation Special Project of Shaanxi"13115"(2009ZDKG-66)the Shaanxi Provincial Project of Special Foundation of Key Disciplines
文摘In view of the present situation of measuring a green residence just by energy saving and environmental protection,we propose that we should build the rural residence more from the farmer's view and set up an evaluation system based on farmers satisfaction.A total of 16 factors affecting the farmers'satisfaction degree of green energy saving rebuilding of rural residence are selected.Questionnaire survey on 110 peasant households is carried out under different situations in Guanzhong region in Shaanxi Province,so as to obtain the importance score of evaluation index.During constructing the evaluation system for farmers'satisfaction degree,Factor Analysis Method is used to classify the related influencing factors.Subjective analysis of Analytic Hierarchy Process and the objective analysis of Factor Analysis Method are combined together to determine the weights of factors at different grades.Then,the final evaluation model is obtained,which provides guidance for the further green energy saving rebuilding of rural residence in China.
基金Project Supported by the National Natural Science Foundation of China(1026100410561005)and the Research Fund of North China Electric Power University(93509001).
