Introduction: Transfusion Transmitted Infections (TTIs) threaten safety of the recipients and the community as a whole and are the subject of real concern worldwide. Aims and Objectives: To know the prevalence of tran...Introduction: Transfusion Transmitted Infections (TTIs) threaten safety of the recipients and the community as a whole and are the subject of real concern worldwide. Aims and Objectives: To know the prevalence of transfusion transmitted infections amongst the blood donors, to evaluate the changing trends of TTIs and to compare these observations within the study as well as with the other relevant studies. Place and Duration of Study: This study was carried out at Blood Bank, Department of Pathology, Gajra Raja Medical College, Gwalior, India, from January 2004 to December 2013 (ten years). Materials and Methods: In this study 122,006 voluntary and replacement donations were screened for TTIs;HIV, HBV, HCV, Syphilis, Malaria and their seroprevalence was calculated. Further study was divided in Group “A” (from 2004 to 2008) and Group “B” (from 2009 to 2013) to compare the results. Results: Out of total 122,006 blood units collected, 79,750 (65.3%) were voluntary and 42,256 (34.7%) were replacement donors. The seropositivity of TTIs in the entire study, in group “A” and in Group “B” was 3.26% (3985/122,006) (p = 0.000005), 2.25% (1238/54,874) (p = 0.000005) and 4.09% (2747/67,123) (p = 0.000005) respectively. In Group “A” and “B” seroprevalence of HIV, HBV, HCV, Syphilis and Malaria was 0.29%, 1.16%, 0.61%, 0.06%, 0.11% and 0.13%, 3.15%, 0.24%, 0.17%, 0.03% respectively. Conclusion: Our study concluded that there was significant increase in seroprevalence of HBV and syphilis whereas decreasing pattern in HIV, HCV and Malaria was observed in last five years as compared to previous five years among the blood donors.展开更多
For real-time inversion and fast reconstruction of formation true resistivity, the forward modeling of electromagnetic wave logging while drilling is usually based on the transversely isotropic formation model with ve...For real-time inversion and fast reconstruction of formation true resistivity, the forward modeling of electromagnetic wave logging while drilling is usually based on the transversely isotropic formation model with vertical symmetry axis(VTI medium), but it only considers the horizontal and vertical resistivity. It has certain limitation during practical application. This paper presents a forward calculation method of electromagnetic wave logging while drilling in transversely isotropic(TTI) strata with inclined symmetry axis based on the Dyadic Green’s function. Anisotropic angle and azimuth are used to characterize TTI formation. The proposed algorithm is verified by numerical examples, the half-space electromagnetic wave reflection and transmission characteristics with different media are analyzed, and the necessity to use the new algorithm is pointed out. Numerical simulation also shows that there exist a critical borehole dip and critical anisotropic angle in TTI formation. Electromagnetic wave logging while drilling responses follows opposite rule before and after these two critical angles. Besides, the 'horns' at the interface are not only related to well deviation, resistivity contrast, but also related to anisotropic angle and anisotropic azimuth.展开更多
从TTI介质一阶应力—速度方程出发,利用旋转交错网格高阶有限差分方法,将非分裂完全匹配层(Non-spliting Perfect Match Layer,简称NPML)边界吸收条件和自由边界条件相结合形成组合边界条件,进行了二维三分量TTI介质弹性波场数值模拟。...从TTI介质一阶应力—速度方程出发,利用旋转交错网格高阶有限差分方法,将非分裂完全匹配层(Non-spliting Perfect Match Layer,简称NPML)边界吸收条件和自由边界条件相结合形成组合边界条件,进行了二维三分量TTI介质弹性波场数值模拟。波场快照和炮记录表明:①采用非分裂式边界条件能较好地消除近地表大角度入射波和瞬逝波;②组合边界条件与NPML边界吸收条件相比,不仅有效地压制了边界反射,同时实现了对自由地表的模拟,获得了丰富的全波场信息,其中在地表产生的PS转换横波作为一种特殊的横波现象,可为近地表结构调查以及多波波场分析等提供有益信息;③自由地表引起的面波以及多次波对偏移结果有着重要影响,因此在实际地震资料处理中应当充分考虑自由地表条件对波场的影响效应。数值模拟结果证实了组合边界条件下二维三分量TTI介质波场数值模拟方法的可行性和正确性。展开更多
Application of titanium alloy has increased many fields since the past 50 years. The major drawback encountered during machining was difficult to cut and the formation of BUE (Built up Edge). This paper presents the t...Application of titanium alloy has increased many fields since the past 50 years. The major drawback encountered during machining was difficult to cut and the formation of BUE (Built up Edge). This paper presents the tool wear study of TTI 15 ceramic insert (80% Aluminum oxide and 20 % Titanium carbide) on machining Ti-6Al-4V at moderate speed with and without the application of water soluble servo cut S coolant. Titanium alloy is highly refractory metal and machining titanium is challenging to the manufacturers. Experiments were carried out on medium duty lathe. Application of coolant tends to reduce toolwear and minimize adhesion of the work material on the cutting tool during machining and also improves the surface finish. Result provides some useful information.展开更多
1984年我在西澳大利亚时应澳大利亚全国笔译和口译评级委员会(National Accreditation Author-ity for Translators and Interpreters,简称NATTI)邀请,和两位澳大利亚人士一起主持了一次西澳大利亚评定二、三级英汉口译译员的考试。这...1984年我在西澳大利亚时应澳大利亚全国笔译和口译评级委员会(National Accreditation Author-ity for Translators and Interpreters,简称NATTI)邀请,和两位澳大利亚人士一起主持了一次西澳大利亚评定二、三级英汉口译译员的考试。这种评级考试基本上每年在澳大利亚各地举行一次。应试者通过考试确定了级别,可以取得证书,展开更多
文摘Introduction: Transfusion Transmitted Infections (TTIs) threaten safety of the recipients and the community as a whole and are the subject of real concern worldwide. Aims and Objectives: To know the prevalence of transfusion transmitted infections amongst the blood donors, to evaluate the changing trends of TTIs and to compare these observations within the study as well as with the other relevant studies. Place and Duration of Study: This study was carried out at Blood Bank, Department of Pathology, Gajra Raja Medical College, Gwalior, India, from January 2004 to December 2013 (ten years). Materials and Methods: In this study 122,006 voluntary and replacement donations were screened for TTIs;HIV, HBV, HCV, Syphilis, Malaria and their seroprevalence was calculated. Further study was divided in Group “A” (from 2004 to 2008) and Group “B” (from 2009 to 2013) to compare the results. Results: Out of total 122,006 blood units collected, 79,750 (65.3%) were voluntary and 42,256 (34.7%) were replacement donors. The seropositivity of TTIs in the entire study, in group “A” and in Group “B” was 3.26% (3985/122,006) (p = 0.000005), 2.25% (1238/54,874) (p = 0.000005) and 4.09% (2747/67,123) (p = 0.000005) respectively. In Group “A” and “B” seroprevalence of HIV, HBV, HCV, Syphilis and Malaria was 0.29%, 1.16%, 0.61%, 0.06%, 0.11% and 0.13%, 3.15%, 0.24%, 0.17%, 0.03% respectively. Conclusion: Our study concluded that there was significant increase in seroprevalence of HBV and syphilis whereas decreasing pattern in HIV, HCV and Malaria was observed in last five years as compared to previous five years among the blood donors.
基金Supported by the National Natural Science Foundation of China(41474100,41574118)
文摘For real-time inversion and fast reconstruction of formation true resistivity, the forward modeling of electromagnetic wave logging while drilling is usually based on the transversely isotropic formation model with vertical symmetry axis(VTI medium), but it only considers the horizontal and vertical resistivity. It has certain limitation during practical application. This paper presents a forward calculation method of electromagnetic wave logging while drilling in transversely isotropic(TTI) strata with inclined symmetry axis based on the Dyadic Green’s function. Anisotropic angle and azimuth are used to characterize TTI formation. The proposed algorithm is verified by numerical examples, the half-space electromagnetic wave reflection and transmission characteristics with different media are analyzed, and the necessity to use the new algorithm is pointed out. Numerical simulation also shows that there exist a critical borehole dip and critical anisotropic angle in TTI formation. Electromagnetic wave logging while drilling responses follows opposite rule before and after these two critical angles. Besides, the 'horns' at the interface are not only related to well deviation, resistivity contrast, but also related to anisotropic angle and anisotropic azimuth.
文摘从TTI介质一阶应力—速度方程出发,利用旋转交错网格高阶有限差分方法,将非分裂完全匹配层(Non-spliting Perfect Match Layer,简称NPML)边界吸收条件和自由边界条件相结合形成组合边界条件,进行了二维三分量TTI介质弹性波场数值模拟。波场快照和炮记录表明:①采用非分裂式边界条件能较好地消除近地表大角度入射波和瞬逝波;②组合边界条件与NPML边界吸收条件相比,不仅有效地压制了边界反射,同时实现了对自由地表的模拟,获得了丰富的全波场信息,其中在地表产生的PS转换横波作为一种特殊的横波现象,可为近地表结构调查以及多波波场分析等提供有益信息;③自由地表引起的面波以及多次波对偏移结果有着重要影响,因此在实际地震资料处理中应当充分考虑自由地表条件对波场的影响效应。数值模拟结果证实了组合边界条件下二维三分量TTI介质波场数值模拟方法的可行性和正确性。
文摘Application of titanium alloy has increased many fields since the past 50 years. The major drawback encountered during machining was difficult to cut and the formation of BUE (Built up Edge). This paper presents the tool wear study of TTI 15 ceramic insert (80% Aluminum oxide and 20 % Titanium carbide) on machining Ti-6Al-4V at moderate speed with and without the application of water soluble servo cut S coolant. Titanium alloy is highly refractory metal and machining titanium is challenging to the manufacturers. Experiments were carried out on medium duty lathe. Application of coolant tends to reduce toolwear and minimize adhesion of the work material on the cutting tool during machining and also improves the surface finish. Result provides some useful information.
文摘1984年我在西澳大利亚时应澳大利亚全国笔译和口译评级委员会(National Accreditation Author-ity for Translators and Interpreters,简称NATTI)邀请,和两位澳大利亚人士一起主持了一次西澳大利亚评定二、三级英汉口译译员的考试。这种评级考试基本上每年在澳大利亚各地举行一次。应试者通过考试确定了级别,可以取得证书,
