The mechanical property and forming limit experiments were carried out on a higli manganese TRIP/TWIP steels with manganese of 18.8%. And the forming /imit diagram was obtained. This hig：h manganese steel shows outst...The mechanical property and forming limit experiments were carried out on a higli manganese TRIP/TWIP steels with manganese of 18.8%. And the forming /imit diagram was obtained. This hig：h manganese steel shows outstanding mechanical properties comhining high strength with good formability. Its limit plane strain corresponding to the lowest point in the plain strain condition is about 38%. The effects of conventional mechanical property on the limit plane strain were analyzed. With increasing the content of Mn, the limit plane strain increases, indicating that TWlP effect is advantageous to the increase of formability. Combining with three classical models and volume invaria ble principle, a FLD model was buih, which is suitable for high manganese steels very well.展开更多
The mechanical properties and microstructure of two low carbon high manganese steels with 23.8% （No. 1） and 33% （No. 2） （mass percent） of manganese were investigated. The results showed that No. 1 steel possesse...The mechanical properties and microstructure of two low carbon high manganese steels with 23.8% （No. 1） and 33% （No. 2） （mass percent） of manganese were investigated. The results showed that No. 1 steel possesses high strength and high plasticity, and No. 2 steel has a relatively high strength and extraordinary plasticity. The No. 1 steel exhibits both TRIP （transformation induced plasticity） and TWIP （twin induced plasticity） effects during the deformation; while only TWIP effect appeared under the same deformation condition for No. 2 steel. The comparison between the microstructures and mechanical properties of two steels was made, and the strengthening mechanisms were also analyzed.展开更多
基金Item Sponsored by National Natural Science Foundation of China(50771019,50901014)Open Project Foundation of State Key Laboratory of Rolling and Automation of Northeastern University of China(2009001)
文摘The mechanical property and forming limit experiments were carried out on a higli manganese TRIP/TWIP steels with manganese of 18.8%. And the forming /imit diagram was obtained. This hig：h manganese steel shows outstanding mechanical properties comhining high strength with good formability. Its limit plane strain corresponding to the lowest point in the plain strain condition is about 38%. The effects of conventional mechanical property on the limit plane strain were analyzed. With increasing the content of Mn, the limit plane strain increases, indicating that TWlP effect is advantageous to the increase of formability. Combining with three classical models and volume invaria ble principle, a FLD model was buih, which is suitable for high manganese steels very well.
文摘The mechanical properties and microstructure of two low carbon high manganese steels with 23.8% （No. 1） and 33% （No. 2） （mass percent） of manganese were investigated. The results showed that No. 1 steel possesses high strength and high plasticity, and No. 2 steel has a relatively high strength and extraordinary plasticity. The No. 1 steel exhibits both TRIP （transformation induced plasticity） and TWIP （twin induced plasticity） effects during the deformation; while only TWIP effect appeared under the same deformation condition for No. 2 steel. The comparison between the microstructures and mechanical properties of two steels was made, and the strengthening mechanisms were also analyzed.
