Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted dru...Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.展开更多
Improving the shape memory effect and superelasticity of Cu-based shape memory alloys(SMAs)has always been a research hotspot in many countries.This work systematically investigates the effects of Gyroid triply period...Improving the shape memory effect and superelasticity of Cu-based shape memory alloys(SMAs)has always been a research hotspot in many countries.This work systematically investigates the effects of Gyroid triply periodic minimal surface(TPMS)lattice structures with different unit sizes and volume fractions on the manufacturing viability,compressive mechanical response,superelasticity and heating recovery properties of CuAlMn SMAs.The results show that the increased specific surface area of the lattice structure leads to increased powder adhesion,making the manufacturability proportional to the unit size and volume fraction.The compressive response of the CuAlMn SMAs Gyroid TPMS lattice structure is negatively correlated with the unit size and positively correlated with the volume fraction.The superelastic recovery of all CuAlMn SMAs with Gyroid TPMS lattice structures is within 5%when the cyclic cumulative strain is set to be 10%.The lattice structure shows the maximum superelasticity when the unit size is 3.00 mm and the volume fraction is 12%,and after heating recovery,the total recovery strain increases as the volume fraction increases.This study introduces a new strategy to enhance the superelastic properties and expand the applications of CuAlMn SMAs in soft robotics,medical equipment,aerospace and other fields.展开更多
Recently,the fabrication methods of orthopedic implants and devices have been greatly developed.Additive manufacturing technology allows the production of complex structures with bio-mimicry features,and has the poten...Recently,the fabrication methods of orthopedic implants and devices have been greatly developed.Additive manufacturing technology allows the production of complex structures with bio-mimicry features,and has the potential to overcome the limitations of conventional fabrication methods.This review explores open-cellular structural design for porous metal implant applications,in relation to the mechanical properties,biocompatibility,and biodegradability.Several types of additive manufacturing techniques including selective laser sintering,selective laser melting,and electron beam melting,are discussed for different applications.Additive manufacturing through powder bed fusion shows great potential for the fabrication of high-quality porous metal implants.However,the powder bed fusion technique still faces two major challenges:it is high cost and timeconsuming.In addition,triply periodic minimal surface(TPMS)structures are also analyzed in this paper,targeting the design of metal implants with an enhanced biomorphic environment.展开更多
文摘Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.
基金supported by the National Natural Science Foundation of China(No.51974028)the Fundamental Research Funds for the Central Universities(No.2021JCCXJD01)the Key R&D and transformation projects in Qinghai Province(No.2023-HZ-801).
文摘Improving the shape memory effect and superelasticity of Cu-based shape memory alloys(SMAs)has always been a research hotspot in many countries.This work systematically investigates the effects of Gyroid triply periodic minimal surface(TPMS)lattice structures with different unit sizes and volume fractions on the manufacturing viability,compressive mechanical response,superelasticity and heating recovery properties of CuAlMn SMAs.The results show that the increased specific surface area of the lattice structure leads to increased powder adhesion,making the manufacturability proportional to the unit size and volume fraction.The compressive response of the CuAlMn SMAs Gyroid TPMS lattice structure is negatively correlated with the unit size and positively correlated with the volume fraction.The superelastic recovery of all CuAlMn SMAs with Gyroid TPMS lattice structures is within 5%when the cyclic cumulative strain is set to be 10%.The lattice structure shows the maximum superelasticity when the unit size is 3.00 mm and the volume fraction is 12%,and after heating recovery,the total recovery strain increases as the volume fraction increases.This study introduces a new strategy to enhance the superelastic properties and expand the applications of CuAlMn SMAs in soft robotics,medical equipment,aerospace and other fields.
基金the financial support for this research by the Australian Research Council through the Discovery Projects DP170102557 and DP180100762.
文摘Recently,the fabrication methods of orthopedic implants and devices have been greatly developed.Additive manufacturing technology allows the production of complex structures with bio-mimicry features,and has the potential to overcome the limitations of conventional fabrication methods.This review explores open-cellular structural design for porous metal implant applications,in relation to the mechanical properties,biocompatibility,and biodegradability.Several types of additive manufacturing techniques including selective laser sintering,selective laser melting,and electron beam melting,are discussed for different applications.Additive manufacturing through powder bed fusion shows great potential for the fabrication of high-quality porous metal implants.However,the powder bed fusion technique still faces two major challenges:it is high cost and timeconsuming.In addition,triply periodic minimal surface(TPMS)structures are also analyzed in this paper,targeting the design of metal implants with an enhanced biomorphic environment.
