The Hengduan Mountains,situated on the southeastern edge of the Qinghai-Tibet Plateau,are the longest and widest north-south-oriented mountain range in China,exerting a significant influence on the ecological and geog...The Hengduan Mountains,situated on the southeastern edge of the Qinghai-Tibet Plateau,are the longest and widest north-south-oriented mountain range in China,exerting a significant influence on the ecological and geographical pattern.Understanding the topographic and geomorphological characteristics of the Hengduan Mountains is fundamental and crucial for research in related fields such as ecology,geography,and sustainability.In this study,Digital Elevation Model(DEM)data were utilized to extract and analyze the topography and geomorphology(TG)pattern.TG maps have been developed to quantitatively classify the TG types in the Hengduan Mountains by combining the five factors of elevation,slope,aspect,relief and landform.The spatial distribution and quantitative characteristics of these factors were mapped and investigated using geographic information systems.The results revealed that:(1)The Hengduan Mountains exhibit an elongated north-south distribution,with an average elevation of approximately 3746 m,an average slope of around 25°,and an average relief of about 266 m.(2)The Hengduan Mountains display significant elevation differences,with an overall high elevation,characterized by a trend of lower elevation in the east and higher elevation in the west,as well as irregular orientations of various aspects.(3)The 19 landform types were identified,the landform types of the Hengduan Mountains are primarily composed of low-relief high-mountains(42.0618%),low-relief mid-mountains(22.4624%),and high-elevation hills(20.5839%).The results of the study can provide data and information support for the ecology,environmental protection and sustainable development of the Hengduan Mountains.展开更多
Traumatic injuries to the central nervous system(CNS) result in disruption of the intricate network of axons which connect functionally related neurons that are widely distributed throughout the brain and spinal cord....Traumatic injuries to the central nervous system(CNS) result in disruption of the intricate network of axons which connect functionally related neurons that are widely distributed throughout the brain and spinal cord.Under normal conditions,maintenance of this complex system is structurally and functionally supported by astrocytes (ACs)and other glial cells,the processes of which form a framework surrounding neuronal cell bodies,dendrites,axons,and synapses.展开更多
Progressive modifications in submarine topography and shorelines drastically affect tidal dynamics in bays.This study examines the influence of topographic slope,bay length,and driving forces on tidal currents followi...Progressive modifications in submarine topography and shorelines drastically affect tidal dynamics in bays.This study examines the influence of topographic slope,bay length,and driving forces on tidal currents following land reclamation.Tidal equa-tions are analytically solved using infinite series,deriving expressions for tidal levels and currents in narrow bays with varying topog-raphy.Tidal levels,influenced by topographic variations,are characterized by amplitude and phase lag of their complex amplitude.These levels demonstrate high sensitivity to longitudinal slope variations but remain relatively stable under lateral slope changes.Un-der constant topographic slopes,even minor changes in bay length can drastically modify amplitude and phase lag,highlighting the sensitivity of tidal dynamics to geometric alterations.Tidal velocity notably increases with steeper longitudinal slopes and modestly rises with elevated lateral slopes.However,changes in longitudinal and lateral slopes do not considerably alter flow patterns.While external forces predominantly regulate tidal velocity with negligible effects on flow patterns,endogenous resistance influences veloci-ty but minimally impacts flow structure.These findings enhance the understanding of tidal responses to geometric and topographic changes,providing valuable guidance for land reclamation projects and coastal management strategies.展开更多
Fog is a highly complex weather phenomenon influenced by numerous factors.This study investigated the impact of the Changbai Mountains’topography on the formation and development of spring fog in the Bohai Sea.From 1...Fog is a highly complex weather phenomenon influenced by numerous factors.This study investigated the impact of the Changbai Mountains’topography on the formation and development of spring fog in the Bohai Sea.From 12 to 14 May 2021,the Bohai region experienced a sea fog event.Utilizing Himawari-8 satellite data,ERA5 reanalysis dataset,land and sea station observations,the WRF model,a topography sensitivity experiment,and backward trajectory tracking,the influence of the Changbai Mountains’topography on the evolution of this sea fog event was assessed.Results indicated that the Changbai Mountains’topography significantly impacted the propagation and concentration of the sea fog through dual effects—namely,the Venturi Effect and Foehn Clearance Effect.Comparative simulations incorporating and excluding the Changbai Mountains revealed that its topography favored weak convergence(Venturi Effect)of low-level airflow over the Bohai Sea induced by a high-pressure system,promoting westward fog expansion.Additionally,the backward trajectory analysis further indicated that the Foehn Clearance Effect of the Changbai Mountains extended its influence far beyond the immediate lee side,contributing to significant changes in atmospheric conditions such as reductions in relative humidity and increases in potential temperature.The dry,warm foehn contributed to a reduction in the liquid water content,ultimately leading to the weakening or even dissipation of the sea fog in the region close to the Changbai Mountains.This study emphasizes the crucial role of the Changbai Mountains’topography in the development and evolution of fog,providing valuable insights for forecasting fog in regions with complex terrain.展开更多
The impact of cross-sectional topographic variability on the kinetic properties of granular flows has been underexplored,which hinders the understanding of the kinematics of rock avalanches.In this study,the throat co...The impact of cross-sectional topographic variability on the kinetic properties of granular flows has been underexplored,which hinders the understanding of the kinematics of rock avalanches.In this study,the throat contraction index(T)is introduced to quantify variations in throat topography,and 96 numerical simulation experiments with varying T and slope angles(δ)are conducted.The findings indicate that granular flows experience transient obstructions when traversing throat topographies,primarily due to the periodic formation and breaking of the arch structure.Observations suggest that the acceleration of velocity in the tails of granular flows is restrained by the throat region,potentially altering the dynamics of related geohazards.In this study,the impact of throat topography is quantitatively assessed,demonstrating a reduction in peak flowrates of granular materials by 20%-80% and extending the flowduration up to six times.The present study proposes the throat-induced hazard index(Φ)to evaluate the influenceof throat topography on the risk of rockslides and avalanches characterized by granular flows,which may provide insights for the design of mitigation structures in topographic regions.展开更多
The textured roll and polished roll were applied instead of the ground roll in a 20-high mill to conduct two-pass rolling of 316L stainless steel strip with thickness of 0.027 mm.After the two-pass rolling with the te...The textured roll and polished roll were applied instead of the ground roll in a 20-high mill to conduct two-pass rolling of 316L stainless steel strip with thickness of 0.027 mm.After the two-pass rolling with the textured roll and polished roll(TPR),the surface roughness of the strip is dramatically reduced,and the surface topographical anisotropy index is diminished to 30.9%of the initial strip.Comparing with the strip rolled using the ground roll in both passes(GGR),the elongation of TPR rolled strip is obviously improved,and the mechanical property anisotropy is greatly weakened.The anisotropy index of tensile strength and elongation are 42.58%and 52.59%of that of GGR rolled strip,which is mainly attributed to the significant decrease of the texture intensity of the strip by TPR process.The results indicate that TPR process can obtain the stainless steel ultra-thin strip with smooth and uniform surface topography and good mechanical properties.展开更多
AIM:To evaluate the potential of artificial intelligence(AI)for automating corneal topography interpretation in orthokeratology patients,aiming to enhance diagnostic precision,efficiency,and clinical decision-making i...AIM:To evaluate the potential of artificial intelligence(AI)for automating corneal topography interpretation in orthokeratology patients,aiming to enhance diagnostic precision,efficiency,and clinical decision-making in myopia management.METHODS:The 1469 corneal topography images from 582 eyes of 326 myopic children treated with orthokeratology lenses over 47mo were collected.Each sample was categorized by decentration,treatment zone size,shape variation,and eye laterality.A multi-task AI model was developed to predict these parameters,with performance measured using area under curve(AUC),accuracy,and F1 scores.We compared AI-only,humanonly,and combined Human+AI approaches on a subset of 100 images.External validation with images from additional hospitals tested model generalizability.RESULTS:The model achieved high accuracy in eyeside prediction(AUC 0.95)and AUC values of 0.52-0.74 for decentration,treatment zone,and shape variation tasks.The combined Human+AI method outperformed AI-only and human-only approaches,achieving the highest accuracy(up to 87%)and fastest processing time(80ms).External validation confirmed robust performance in simple tasks,though accuracy was lower for complex classifications due to imaging variations.CONCLUSION:AI provides efficient routine corneal topography assessments,while complex cases benefit most from a Human+AI approach,particularly in scenarios requiring nuanced clinical interpretation.The model currently functions as an assistive tool.展开更多
High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy...High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy,experiments of high-speed milling and fatigue were conducted to investigate the effect of parameters on 3D surface topography and fatigue life.Based on the fatigue fracture,the effect mechanism of surface topography on the fatigue crack initiation was proposed.The experiment results show that when the milling speed ranged from 100 m/min to 140 m/min,and the feed per tooth ranged from 0.02 mm/z to 0.06 mm/z,the obtained surface roughness were within the limit（0.8 μm）.Fatigue life decreased sharply with the increase of surface equivalent stress concentration factor.The average error of fatigue life between the established model and the experimental results was 6.25%.The fatigue cracks nucleated at the intersection edge of machined surface.展开更多
We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to sol...We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to solve the cutoff botmdary problem as well as to consider the requirement of using the same subdivision grid in joint multifrequency inversion. The proposed method introduces the attenuation factor, and by adjusting it, acoustic waves are sufficiently attenuated in the attenuation layer to minimize the cutoff boundary effect. Based on the law of exponential attenuation, expressions for computing the attenuation factor and the thickness of attenuation layers are derived for different frequencies. In multifrequency-domain FWI, the conjugate gradient method is used to solve equations in the Gauss-Newton algorithm and thus minimize the computation cost in calculating the Hessian matrix. In addition, the effect of initial model selection and frequency combination on FWI is analyzed. Examples using numerical simulations and FWI calculations are used to verify the efficiency of the proposed method.展开更多
As fundamental parameters of the Antarctic Ice Sheet,ice thickness and subglacial topography are critical factors for studying the basal conditions and mass balance in Antarctica.During CHINARE 24（the 24 th Chinese N...As fundamental parameters of the Antarctic Ice Sheet,ice thickness and subglacial topography are critical factors for studying the basal conditions and mass balance in Antarctica.During CHINARE 24（the 24 th Chinese National Antarctic Research Expedition,2007/08）,the research team used a deep ice-penetrating radar system to measure the ice thickness and subglacial topography of the ＂Chinese Wall＂ around Kunlun Station,East Antarctica.Preliminary results show that the ice thickness varies mostly from 1600 m to 2800 m along the ＂Chinese Wall＂,with the thickest ice being 3444 m,and the thinnest ice 1255 m.The average bedrock elevation is 1722 m,while the minimum is just 604 m.Compared with the northern side of the ice divide,the ice thickness is a little greater and the subglacial topography lower on the southern side,which is also characterized by four deep valleys.We found no basal freeze-on ice in the Gamburtsev Subglacial Mountains area,subglacial lakes,or water bodies along the ＂Chinese Wall＂.Ice thickness and subglacial topography data extracted from the Bedmap 2 database along the ＂Chinese Wall＂ are consistent with our results,but their resolution and accuracy are very limited in areas where the bedrock fluctuates intensely.The distribution of ice thickness and subglacial topography detected by ice-penetrating radar clarifies the features of the ice sheet in this ＂inaccessible＂ region.These results will help to advance the study of ice sheet dynamics and the determination of future locations of the GSM＇s geological and deep ice core drilling sites in the Dome A region.展开更多
In order to eliminate the effect of ocean bottom topography on seismic wave field,we transformed curved（x,z）coordinate system grids into rectangular（ξ,η）coordinate system grids and derived a 2-D scalar acoustic ...In order to eliminate the effect of ocean bottom topography on seismic wave field,we transformed curved（x,z）coordinate system grids into rectangular（ξ,η）coordinate system grids and derived a 2-D scalar acoustic wave equation in theξ,ηdomain.The seismic wave field collected at the sea surface was downward continued to the ocean bottom by the inverse finite difference method with the water velocity and then was reversely continued to the ocean surface by the finite difference method using the layer velocity from just below the ocean bottom in the（ξ,η）domain.Simulation calculations and practical application show that this method can not only remove the reflection travel time distortion but also correct the dynamic parameter changes caused by the ocean bottom topography.The inverted velocity after wave field continuation is much more accurate than before continuation and the image section was greatly improved compared to the original wave field.展开更多
Imaging mechanism of underwater topography by SAR and a underwater topography SAR detection model built on the theory of underwater topography detection with SAR image presented by Yuan Yeli are used to detect the und...Imaging mechanism of underwater topography by SAR and a underwater topography SAR detection model built on the theory of underwater topography detection with SAR image presented by Yuan Yeli are used to detect the underwater topography of Shuangzi Reefs in the Nansha Islands with three scenes of SAR images acquired in different time. Detection results of three SAR images are compared with the chart topography and the detection errors are analyzed. Underwater topography detection experiments of Shuangzi Reefs show that the detection model is practicable. The detection results indicate that SAR images acquired in different time also can be used to detect the underwater topography, and the detection results are affected by the ocean conditions in the SAR acquiring time.展开更多
Based on the latest submarine topography data of the China 908 Project （China offshore marine environmental comprehensive investigation and assessment）,we analyzed the general China offshore submarine topographical ...Based on the latest submarine topography data of the China 908 Project （China offshore marine environmental comprehensive investigation and assessment）,we analyzed the general China offshore submarine topographical characteristics and the factors influencing its development.The submarine topography off the coast of China follows the NW-SE trend of the land topography.The gradient of the submarine topography ranges from 0.2％ to 1.6％ with an average gradient of about 0.8％.The depth contours run mostly parallel to the coast,and extend out to sea in estuary areas.The submarine topography is dominated by the geological structure,which shows the typical characteristics of two uplifts and two subsidence events from north to south.The geological structure combined with the different sedimentary environments and complex hydrodynamic conditions produced topography that can be characterized by three types：sedimentary basins,compressionuplift,and transition form.In the sedimentary basin and compression-uplift regions,the topographical undulation is small,sediments are fine-grained,and the currents flow in a single direction,leading to bays with sedimentary plains and underwater accumulation slopes,which are of the same tectonic origin.Transition-type topography is characterized by strong undulations and mixed-size sediment particles,terraces and scarps inshore and shelf plains and erosion-deposition landforms offshore.This is a result of incomplete fault block development and repeated transgressions.In the deposition reformation regions （transition form type）,the topography has strong undulations,the sediments are coarse,tidal sand ridges are well-developed at terrigenoussupplied estuaries and convergence zones,and the Holocene sediments are thick,transformed by tides,river runoff,and currents.展开更多
Engineering seismic exploration aims at shallow imaging which is confused by statics if the surface is uneven. Direct pre-stack depth migration （DPDM） is based on accurate elevations of sources and receivers, by whi...Engineering seismic exploration aims at shallow imaging which is confused by statics if the surface is uneven. Direct pre-stack depth migration （DPDM） is based on accurate elevations of sources and receivers, by which static correction is completely abandoned before migration and surely the imaging quality is remarkably improved. To obtain some artificial shot gathers, high-order staggered-grid finite-difference （FD） method is adapted to model acoustic wave propagation. Since the shot gathers are always disturbed by regular interferences, the statics still must be applied to supporting the interference elimination by apparent velocity filtering method. Then all the shot gathers should be removed back to their original positions by reverse statics. Finally, they are migrated by pre-stack reverse-time depth migration and imaged. The numerical experiments show that the DPDM can ideally avoid the mistakes caused by statics and increase imaging precision.展开更多
A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency wav...A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency waves mostly is maximal height of topography and topographic slope. The former makes frequency of topographic Rossby waves decrease, the latter makes Rossby waves instable. Moreover, when topographic slope is appropriate, it can also make Rossby waves turn into low-frequency waves.展开更多
Surface of Al 2O 3 ceramic was processed by an excimer laser and the characteristics of topography were examined based on the application of the microelectromechanical system(MEMS). It is indicated that the statisti...Surface of Al 2O 3 ceramic was processed by an excimer laser and the characteristics of topography were examined based on the application of the microelectromechanical system(MEMS). It is indicated that the statistic parameters of surface topography processed by the excimer laser have an obvious regularity. The arithmetic-mean value R a and the root-mean square value R q change with the changing of processing parameters in the same step and trend, and there is a quantitative relation between them.A simplified model is proposed for the excimer laser processing surface profile, whose results of the analysis and calculation agree basically with the experimental data. Furthermore,the surfaces processed by excimer laser are greatly flat. Skewness root-mean-square value Z· q changed little with the change of the technological parameters. The above characteristics depend on the processing principle of excimer laser, quite different from the cutting processing.展开更多
The concept of creating a Topography integrated urban center is to create an urban center that integrated with the city.The first step of the Concept is to settle by using the natural elevation in the land and to crea...The concept of creating a Topography integrated urban center is to create an urban center that integrated with the city.The first step of the Concept is to settle by using the natural elevation in the land and to create volumes compatible with land by raising together with the elevation.While the passenger circulation at starting elevation is moved into a project with the cavestyle volume settled in land elevation.The new area of the square to be defined in the center of the building is intended to form an area combining the neighboring squares Kartal Square and Freedom Square,as well as contributing to the silhouette of Kartal from the sea with the location of the square and building.The project is a central complex design that deals with various urban problems thanks to professionals,local people of Kartal,and clubs which established with the municipality in a comprehensive way to search for solutions to be organized urban workshops and conferences.展开更多
Studying and understanding of the surface topography variation are the basis for analyzing tribological problems,and characterization of worn surface is necessary.Fractal geometry offers a more accurate description fo...Studying and understanding of the surface topography variation are the basis for analyzing tribological problems,and characterization of worn surface is necessary.Fractal geometry offers a more accurate description for surface roughness that topographic surfaces are statistically self-similar and can be quantitatively evaluated by fractal parameters.The change regularity of worn surface topography is one of the most important aspects of running-in study.However,the existing research normally adopts only one friction matching pair to explore the surface topography change,which interrupts the running-in wear process and makes the experimental result lack authenticity and objectivity.In this paper,to investigate the change regularity of surface topography during the real running-in process,a series of running-in tests by changing friction pairs under the same operating conditions are conducted on UMT-II Universal Multifunction Tester.The surface profile data are acquired by MiaoXAM2.5X-50X Ultrahigh Precision Surface 3D Profiler and analyzed using fractal dimension D,scale coefficient C and characteristic roughness Ra*based on root mean square(RMS)method.The characterization effects of the three parameters are discussed and compared.The results obtained show that there exists remarkable fractal feature of surface topography during running-in process,both D and Ra*increase gradually,while C decreases slowly as the wear-in process goes on,and all parameters tend to be stable when the wear process steps into the normal wear process.Ra*illustrates higher sensitivity for rough surface characterization compared with the other two parameters.In addition,the running-in test carried with a set of identical surface properties is more scientific and reasonable than the traditional one.The proposed research further indicates that the fractal method can quantitatively measure the rough surface,which also provides an evidence for running-in process identification and tribology design.展开更多
With increased computational power, reverse-time prestack depth migration（RT-PSDM） has become a preferred imaging tool in seismic exploration, yet its use has remained relatively limited in ground-penetrating radar...With increased computational power, reverse-time prestack depth migration（RT-PSDM） has become a preferred imaging tool in seismic exploration, yet its use has remained relatively limited in ground-penetrating radar（GPR） applications. Complex topography alters the wavefield kinematics making for a challenging imaging problem. Model simulations show that topographic variation can substantially distort reflection amplitudes due to irregular wavefield spreading, attenuation anomalies due to irregular path lengths, and focusing and defocusing effects at the surface. The effects are magnified when the topographic variations are on the same order as the depth of investigation––a situation that is often encountered in GPR investigations. Here, I use a full wave-equation RT-PSDM algorithm to image GPR data in the presence of large topographic variability relative to the depth of investigation. The source and receiver wavefields are propagated directly from the topographic surface and this approach inherently corrects for irregular kinematics, spreading and attenuation. The results show that when GPR data are acquired in areas of extreme topography, RT-PSDM can accurately reconstruct reflector geometry as well as reflection amplitude.展开更多
Jiuzhaigou National Park, located in northwest plateau of Sichuan Province, is a UNESCO World Heritage Site, and one of the most popular scenic areas in China. On August 8, 2017, a Mw 6.5 earthquake occurred 5 km to t...Jiuzhaigou National Park, located in northwest plateau of Sichuan Province, is a UNESCO World Heritage Site, and one of the most popular scenic areas in China. On August 8, 2017, a Mw 6.5 earthquake occurred 5 km to the west of a major scenic area, causing 25 deaths and injuring 525, and the Park was seriously affected. The objective of this study was to explore the controls of seismogenic fault and topographic factors on the spatial patterns of these landslides. Immediately after the main shock, field survey, remote-sensing investigations, and statistical and spatial analysis were undertaken. At least 2212 earthquake-triggered landslides were identified, covering a total area of 11.8 km^2. Thesewere mainly shallow landslides and rock falls. Results demonstrated that landslides exhibited a close spatial correlation with seismogenic faults. More than 85% of the landslides occurred at 2200 to 3700 m elevations. The largest quantity of landslides was recorded in places with local topographic reliefs ranging from 200 to 500 m. Slopes in the range of ~20°-50° are the most susceptible to failure. Landslides occurred mostly on slopes facing east-northeast(ENE), east(E), east-southeast(ESE), and southeast(SE), which were nearly vertical to the orientation of the seismogenic fault slip. The back-slope direction and thin ridge amplification effects were documented. These results provide insights on the control of the spatial pattern of earthquake-triggered landslides modified by the synergetic effect of seismogenic faults and topography.展开更多
基金funded by the Yunnan Provincial Basic Research Joint Special Fund Project(2019FH001(-052))Cangshan Mountain Synthetic Scientific Expeditions Fund.
文摘The Hengduan Mountains,situated on the southeastern edge of the Qinghai-Tibet Plateau,are the longest and widest north-south-oriented mountain range in China,exerting a significant influence on the ecological and geographical pattern.Understanding the topographic and geomorphological characteristics of the Hengduan Mountains is fundamental and crucial for research in related fields such as ecology,geography,and sustainability.In this study,Digital Elevation Model(DEM)data were utilized to extract and analyze the topography and geomorphology(TG)pattern.TG maps have been developed to quantitatively classify the TG types in the Hengduan Mountains by combining the five factors of elevation,slope,aspect,relief and landform.The spatial distribution and quantitative characteristics of these factors were mapped and investigated using geographic information systems.The results revealed that:(1)The Hengduan Mountains exhibit an elongated north-south distribution,with an average elevation of approximately 3746 m,an average slope of around 25°,and an average relief of about 266 m.(2)The Hengduan Mountains display significant elevation differences,with an overall high elevation,characterized by a trend of lower elevation in the east and higher elevation in the west,as well as irregular orientations of various aspects.(3)The 19 landform types were identified,the landform types of the Hengduan Mountains are primarily composed of low-relief high-mountains(42.0618%),low-relief mid-mountains(22.4624%),and high-elevation hills(20.5839%).The results of the study can provide data and information support for the ecology,environmental protection and sustainable development of the Hengduan Mountains.
文摘Traumatic injuries to the central nervous system(CNS) result in disruption of the intricate network of axons which connect functionally related neurons that are widely distributed throughout the brain and spinal cord.Under normal conditions,maintenance of this complex system is structurally and functionally supported by astrocytes (ACs)and other glial cells,the processes of which form a framework surrounding neuronal cell bodies,dendrites,axons,and synapses.
基金supported by the National Natural Sci-ence Foundation of China(No.U2106204)the Shanxi Water Conservancy Science and Technology Re-search and Extension Project(No.2023ZF19).
文摘Progressive modifications in submarine topography and shorelines drastically affect tidal dynamics in bays.This study examines the influence of topographic slope,bay length,and driving forces on tidal currents following land reclamation.Tidal equa-tions are analytically solved using infinite series,deriving expressions for tidal levels and currents in narrow bays with varying topog-raphy.Tidal levels,influenced by topographic variations,are characterized by amplitude and phase lag of their complex amplitude.These levels demonstrate high sensitivity to longitudinal slope variations but remain relatively stable under lateral slope changes.Un-der constant topographic slopes,even minor changes in bay length can drastically modify amplitude and phase lag,highlighting the sensitivity of tidal dynamics to geometric alterations.Tidal velocity notably increases with steeper longitudinal slopes and modestly rises with elevated lateral slopes.However,changes in longitudinal and lateral slopes do not considerably alter flow patterns.While external forces predominantly regulate tidal velocity with negligible effects on flow patterns,endogenous resistance influences veloci-ty but minimally impacts flow structure.These findings enhance the understanding of tidal responses to geometric and topographic changes,providing valuable guidance for land reclamation projects and coastal management strategies.
基金jointly supported by the National Natural Science Foundation of China[grant number 42205009]the Open Grants of the State Key Laboratory of Severe Weather[grant number 2024LASWB23]+1 种基金the Collaborative Innovation Project for Marine Meteorological Science and Technology in the Bohai Rim Region[grant number QYXM202315]the Research and Development Project of Hebei Provincial Meteorological Bureau[grant number 22ky26]。
文摘Fog is a highly complex weather phenomenon influenced by numerous factors.This study investigated the impact of the Changbai Mountains’topography on the formation and development of spring fog in the Bohai Sea.From 12 to 14 May 2021,the Bohai region experienced a sea fog event.Utilizing Himawari-8 satellite data,ERA5 reanalysis dataset,land and sea station observations,the WRF model,a topography sensitivity experiment,and backward trajectory tracking,the influence of the Changbai Mountains’topography on the evolution of this sea fog event was assessed.Results indicated that the Changbai Mountains’topography significantly impacted the propagation and concentration of the sea fog through dual effects—namely,the Venturi Effect and Foehn Clearance Effect.Comparative simulations incorporating and excluding the Changbai Mountains revealed that its topography favored weak convergence(Venturi Effect)of low-level airflow over the Bohai Sea induced by a high-pressure system,promoting westward fog expansion.Additionally,the backward trajectory analysis further indicated that the Foehn Clearance Effect of the Changbai Mountains extended its influence far beyond the immediate lee side,contributing to significant changes in atmospheric conditions such as reductions in relative humidity and increases in potential temperature.The dry,warm foehn contributed to a reduction in the liquid water content,ultimately leading to the weakening or even dissipation of the sea fog in the region close to the Changbai Mountains.This study emphasizes the crucial role of the Changbai Mountains’topography in the development and evolution of fog,providing valuable insights for forecasting fog in regions with complex terrain.
基金supported by the National Natural Science Foundation of China(Grant Nos.42307194 and 42120104002)the Young Elite Scientists Sponsorship Program by CAST(Grant No.2024QNRC001).
文摘The impact of cross-sectional topographic variability on the kinetic properties of granular flows has been underexplored,which hinders the understanding of the kinematics of rock avalanches.In this study,the throat contraction index(T)is introduced to quantify variations in throat topography,and 96 numerical simulation experiments with varying T and slope angles(δ)are conducted.The findings indicate that granular flows experience transient obstructions when traversing throat topographies,primarily due to the periodic formation and breaking of the arch structure.Observations suggest that the acceleration of velocity in the tails of granular flows is restrained by the throat region,potentially altering the dynamics of related geohazards.In this study,the impact of throat topography is quantitatively assessed,demonstrating a reduction in peak flowrates of granular materials by 20%-80% and extending the flowduration up to six times.The present study proposes the throat-induced hazard index(Φ)to evaluate the influenceof throat topography on the risk of rockslides and avalanches characterized by granular flows,which may provide insights for the design of mitigation structures in topographic regions.
基金supported by the National Natural Science Foundation of China(Nos.51974196,52275361,and 52305406)the Key Projects of the National Natural Science Foundation of China(No.U22A20188)the Special Projects of the Central Government in Guidance of Local Science and Technology Development(YDZX20191400002149).
文摘The textured roll and polished roll were applied instead of the ground roll in a 20-high mill to conduct two-pass rolling of 316L stainless steel strip with thickness of 0.027 mm.After the two-pass rolling with the textured roll and polished roll(TPR),the surface roughness of the strip is dramatically reduced,and the surface topographical anisotropy index is diminished to 30.9%of the initial strip.Comparing with the strip rolled using the ground roll in both passes(GGR),the elongation of TPR rolled strip is obviously improved,and the mechanical property anisotropy is greatly weakened.The anisotropy index of tensile strength and elongation are 42.58%and 52.59%of that of GGR rolled strip,which is mainly attributed to the significant decrease of the texture intensity of the strip by TPR process.The results indicate that TPR process can obtain the stainless steel ultra-thin strip with smooth and uniform surface topography and good mechanical properties.
基金Supported by the National Natural Science Foundation of China(No.82201195).
文摘AIM:To evaluate the potential of artificial intelligence(AI)for automating corneal topography interpretation in orthokeratology patients,aiming to enhance diagnostic precision,efficiency,and clinical decision-making in myopia management.METHODS:The 1469 corneal topography images from 582 eyes of 326 myopic children treated with orthokeratology lenses over 47mo were collected.Each sample was categorized by decentration,treatment zone size,shape variation,and eye laterality.A multi-task AI model was developed to predict these parameters,with performance measured using area under curve(AUC),accuracy,and F1 scores.We compared AI-only,humanonly,and combined Human+AI approaches on a subset of 100 images.External validation with images from additional hospitals tested model generalizability.RESULTS:The model achieved high accuracy in eyeside prediction(AUC 0.95)and AUC values of 0.52-0.74 for decentration,treatment zone,and shape variation tasks.The combined Human+AI method outperformed AI-only and human-only approaches,achieving the highest accuracy(up to 87%)and fastest processing time(80ms).External validation confirmed robust performance in simple tasks,though accuracy was lower for complex classifications due to imaging variations.CONCLUSION:AI provides efficient routine corneal topography assessments,while complex cases benefit most from a Human+AI approach,particularly in scenarios requiring nuanced clinical interpretation.The model currently functions as an assistive tool.
基金Projects(50975237,51005184) supported by the National Natural Science Foundation of China
文摘High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy,experiments of high-speed milling and fatigue were conducted to investigate the effect of parameters on 3D surface topography and fatigue life.Based on the fatigue fracture,the effect mechanism of surface topography on the fatigue crack initiation was proposed.The experiment results show that when the milling speed ranged from 100 m/min to 140 m/min,and the feed per tooth ranged from 0.02 mm/z to 0.06 mm/z,the obtained surface roughness were within the limit（0.8 μm）.Fatigue life decreased sharply with the increase of surface equivalent stress concentration factor.The average error of fatigue life between the established model and the experimental results was 6.25%.The fatigue cracks nucleated at the intersection edge of machined surface.
基金financially supported by the National High Technology Research and Development Program of China(No.2012AA09A20105)the National Science Foundation Network(No.41574127)
文摘We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to solve the cutoff botmdary problem as well as to consider the requirement of using the same subdivision grid in joint multifrequency inversion. The proposed method introduces the attenuation factor, and by adjusting it, acoustic waves are sufficiently attenuated in the attenuation layer to minimize the cutoff boundary effect. Based on the law of exponential attenuation, expressions for computing the attenuation factor and the thickness of attenuation layers are derived for different frequencies. In multifrequency-domain FWI, the conjugate gradient method is used to solve equations in the Gauss-Newton algorithm and thus minimize the computation cost in calculating the Hessian matrix. In addition, the effect of initial model selection and frequency combination on FWI is analyzed. Examples using numerical simulations and FWI calculations are used to verify the efficiency of the proposed method.
基金supported by National Basic Research Program of China(Grant Nos.2013CBA01804 and 2012CB957702)the Chinese Polar Environmental Comprehensive Investigation and Assessment Programs(Grant No.CHINARE-02-02)the National Science Foundation of China(Grant No.41101071)
文摘As fundamental parameters of the Antarctic Ice Sheet,ice thickness and subglacial topography are critical factors for studying the basal conditions and mass balance in Antarctica.During CHINARE 24（the 24 th Chinese National Antarctic Research Expedition,2007/08）,the research team used a deep ice-penetrating radar system to measure the ice thickness and subglacial topography of the ＂Chinese Wall＂ around Kunlun Station,East Antarctica.Preliminary results show that the ice thickness varies mostly from 1600 m to 2800 m along the ＂Chinese Wall＂,with the thickest ice being 3444 m,and the thinnest ice 1255 m.The average bedrock elevation is 1722 m,while the minimum is just 604 m.Compared with the northern side of the ice divide,the ice thickness is a little greater and the subglacial topography lower on the southern side,which is also characterized by four deep valleys.We found no basal freeze-on ice in the Gamburtsev Subglacial Mountains area,subglacial lakes,or water bodies along the ＂Chinese Wall＂.Ice thickness and subglacial topography data extracted from the Bedmap 2 database along the ＂Chinese Wall＂ are consistent with our results,but their resolution and accuracy are very limited in areas where the bedrock fluctuates intensely.The distribution of ice thickness and subglacial topography detected by ice-penetrating radar clarifies the features of the ice sheet in this ＂inaccessible＂ region.These results will help to advance the study of ice sheet dynamics and the determination of future locations of the GSM＇s geological and deep ice core drilling sites in the Dome A region.
基金sponsored by the National 973 Program of China(Grant No.2009CB219505)International Science&Technology Cooperation Program of China(Grant No.2010DFA21630)
文摘In order to eliminate the effect of ocean bottom topography on seismic wave field,we transformed curved（x,z）coordinate system grids into rectangular（ξ,η）coordinate system grids and derived a 2-D scalar acoustic wave equation in theξ,ηdomain.The seismic wave field collected at the sea surface was downward continued to the ocean bottom by the inverse finite difference method with the water velocity and then was reversely continued to the ocean surface by the finite difference method using the layer velocity from just below the ocean bottom in the（ξ,η）domain.Simulation calculations and practical application show that this method can not only remove the reflection travel time distortion but also correct the dynamic parameter changes caused by the ocean bottom topography.The inverted velocity after wave field continuation is much more accurate than before continuation and the image section was greatly improved compared to the original wave field.
文摘Imaging mechanism of underwater topography by SAR and a underwater topography SAR detection model built on the theory of underwater topography detection with SAR image presented by Yuan Yeli are used to detect the underwater topography of Shuangzi Reefs in the Nansha Islands with three scenes of SAR images acquired in different time. Detection results of three SAR images are compared with the chart topography and the detection errors are analyzed. Underwater topography detection experiments of Shuangzi Reefs show that the detection model is practicable. The detection results indicate that SAR images acquired in different time also can be used to detect the underwater topography, and the detection results are affected by the ocean conditions in the SAR acquiring time.
基金granted by the National Science Foundation of China (No. 41276058)the project of integrated achievement on investigation of submarine topography and geomorphology in offshore China (No. 908-ZC-I-07)the State Oceanic Administration public welfare research project (No. 201105001, No. 2012418004)
文摘Based on the latest submarine topography data of the China 908 Project （China offshore marine environmental comprehensive investigation and assessment）,we analyzed the general China offshore submarine topographical characteristics and the factors influencing its development.The submarine topography off the coast of China follows the NW-SE trend of the land topography.The gradient of the submarine topography ranges from 0.2％ to 1.6％ with an average gradient of about 0.8％.The depth contours run mostly parallel to the coast,and extend out to sea in estuary areas.The submarine topography is dominated by the geological structure,which shows the typical characteristics of two uplifts and two subsidence events from north to south.The geological structure combined with the different sedimentary environments and complex hydrodynamic conditions produced topography that can be characterized by three types：sedimentary basins,compressionuplift,and transition form.In the sedimentary basin and compression-uplift regions,the topographical undulation is small,sediments are fine-grained,and the currents flow in a single direction,leading to bays with sedimentary plains and underwater accumulation slopes,which are of the same tectonic origin.Transition-type topography is characterized by strong undulations and mixed-size sediment particles,terraces and scarps inshore and shelf plains and erosion-deposition landforms offshore.This is a result of incomplete fault block development and repeated transgressions.In the deposition reformation regions （transition form type）,the topography has strong undulations,the sediments are coarse,tidal sand ridges are well-developed at terrigenoussupplied estuaries and convergence zones,and the Holocene sediments are thick,transformed by tides,river runoff,and currents.
文摘Engineering seismic exploration aims at shallow imaging which is confused by statics if the surface is uneven. Direct pre-stack depth migration （DPDM） is based on accurate elevations of sources and receivers, by which static correction is completely abandoned before migration and surely the imaging quality is remarkably improved. To obtain some artificial shot gathers, high-order staggered-grid finite-difference （FD） method is adapted to model acoustic wave propagation. Since the shot gathers are always disturbed by regular interferences, the statics still must be applied to supporting the interference elimination by apparent velocity filtering method. Then all the shot gathers should be removed back to their original positions by reverse statics. Finally, they are migrated by pre-stack reverse-time depth migration and imaged. The numerical experiments show that the DPDM can ideally avoid the mistakes caused by statics and increase imaging precision.
文摘A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency waves mostly is maximal height of topography and topographic slope. The former makes frequency of topographic Rossby waves decrease, the latter makes Rossby waves instable. Moreover, when topographic slope is appropriate, it can also make Rossby waves turn into low-frequency waves.
文摘Surface of Al 2O 3 ceramic was processed by an excimer laser and the characteristics of topography were examined based on the application of the microelectromechanical system(MEMS). It is indicated that the statistic parameters of surface topography processed by the excimer laser have an obvious regularity. The arithmetic-mean value R a and the root-mean square value R q change with the changing of processing parameters in the same step and trend, and there is a quantitative relation between them.A simplified model is proposed for the excimer laser processing surface profile, whose results of the analysis and calculation agree basically with the experimental data. Furthermore,the surfaces processed by excimer laser are greatly flat. Skewness root-mean-square value Z· q changed little with the change of the technological parameters. The above characteristics depend on the processing principle of excimer laser, quite different from the cutting processing.
文摘The concept of creating a Topography integrated urban center is to create an urban center that integrated with the city.The first step of the Concept is to settle by using the natural elevation in the land and to create volumes compatible with land by raising together with the elevation.While the passenger circulation at starting elevation is moved into a project with the cavestyle volume settled in land elevation.The new area of the square to be defined in the center of the building is intended to form an area combining the neighboring squares Kartal Square and Freedom Square,as well as contributing to the silhouette of Kartal from the sea with the location of the square and building.The project is a central complex design that deals with various urban problems thanks to professionals,local people of Kartal,and clubs which established with the municipality in a comprehensive way to search for solutions to be organized urban workshops and conferences.
基金supported by National Natural Science Foundation of China(Grant No.50975276,Grant No.50475164)National Basic Research Program of China(973 Program,Grant No.2007CB607605)Doctoral Programs Foundation of Ministry of Education of China(Grant No.200802900513)
文摘Studying and understanding of the surface topography variation are the basis for analyzing tribological problems,and characterization of worn surface is necessary.Fractal geometry offers a more accurate description for surface roughness that topographic surfaces are statistically self-similar and can be quantitatively evaluated by fractal parameters.The change regularity of worn surface topography is one of the most important aspects of running-in study.However,the existing research normally adopts only one friction matching pair to explore the surface topography change,which interrupts the running-in wear process and makes the experimental result lack authenticity and objectivity.In this paper,to investigate the change regularity of surface topography during the real running-in process,a series of running-in tests by changing friction pairs under the same operating conditions are conducted on UMT-II Universal Multifunction Tester.The surface profile data are acquired by MiaoXAM2.5X-50X Ultrahigh Precision Surface 3D Profiler and analyzed using fractal dimension D,scale coefficient C and characteristic roughness Ra*based on root mean square(RMS)method.The characterization effects of the three parameters are discussed and compared.The results obtained show that there exists remarkable fractal feature of surface topography during running-in process,both D and Ra*increase gradually,while C decreases slowly as the wear-in process goes on,and all parameters tend to be stable when the wear process steps into the normal wear process.Ra*illustrates higher sensitivity for rough surface characterization compared with the other two parameters.In addition,the running-in test carried with a set of identical surface properties is more scientific and reasonable than the traditional one.The proposed research further indicates that the fractal method can quantitatively measure the rough surface,which also provides an evidence for running-in process identification and tribology design.
基金The Herbette Fondation at the University of Lausanne, Switzerland
文摘With increased computational power, reverse-time prestack depth migration（RT-PSDM） has become a preferred imaging tool in seismic exploration, yet its use has remained relatively limited in ground-penetrating radar（GPR） applications. Complex topography alters the wavefield kinematics making for a challenging imaging problem. Model simulations show that topographic variation can substantially distort reflection amplitudes due to irregular wavefield spreading, attenuation anomalies due to irregular path lengths, and focusing and defocusing effects at the surface. The effects are magnified when the topographic variations are on the same order as the depth of investigation––a situation that is often encountered in GPR investigations. Here, I use a full wave-equation RT-PSDM algorithm to image GPR data in the presence of large topographic variability relative to the depth of investigation. The source and receiver wavefields are propagated directly from the topographic surface and this approach inherently corrects for irregular kinematics, spreading and attenuation. The results show that when GPR data are acquired in areas of extreme topography, RT-PSDM can accurately reconstruct reflector geometry as well as reflection amplitude.
基金supported by the Key Laboratory Program for Mountain Hazards and Earth Surface Process, CAS (Grant No. KLMHESP17-06)International Science Program-Silk Road Disaster Risk Reduction (Grant No. 131551KYSB20160002)+2 种基金Major International (Regional) Joint Research Project (Grant No.41520104002) Key Research Program of Frontier Sciences,CAS (Grant No. QYZDY-SSWDQC006) 135 Strategic Program of the Institute of Mountain Hazards and Environment, CAS, NO. SDS-135-1701
文摘Jiuzhaigou National Park, located in northwest plateau of Sichuan Province, is a UNESCO World Heritage Site, and one of the most popular scenic areas in China. On August 8, 2017, a Mw 6.5 earthquake occurred 5 km to the west of a major scenic area, causing 25 deaths and injuring 525, and the Park was seriously affected. The objective of this study was to explore the controls of seismogenic fault and topographic factors on the spatial patterns of these landslides. Immediately after the main shock, field survey, remote-sensing investigations, and statistical and spatial analysis were undertaken. At least 2212 earthquake-triggered landslides were identified, covering a total area of 11.8 km^2. Thesewere mainly shallow landslides and rock falls. Results demonstrated that landslides exhibited a close spatial correlation with seismogenic faults. More than 85% of the landslides occurred at 2200 to 3700 m elevations. The largest quantity of landslides was recorded in places with local topographic reliefs ranging from 200 to 500 m. Slopes in the range of ~20°-50° are the most susceptible to failure. Landslides occurred mostly on slopes facing east-northeast(ENE), east(E), east-southeast(ESE), and southeast(SE), which were nearly vertical to the orientation of the seismogenic fault slip. The back-slope direction and thin ridge amplification effects were documented. These results provide insights on the control of the spatial pattern of earthquake-triggered landslides modified by the synergetic effect of seismogenic faults and topography.
