Poyang Lake is the largest freshwater lake in China. This paper conducted a digital and rapid investigation of the lake’s wetland vegetation biomass using Landsat ETM data acquired on April 16, 2000. First, utilizing...Poyang Lake is the largest freshwater lake in China. This paper conducted a digital and rapid investigation of the lake’s wetland vegetation biomass using Landsat ETM data acquired on April 16, 2000. First, utilizing the false color composite derived from the ETM data as one of the main references, the authors designed a reasonable sampling route for field measurement of the biomass, and carried it out on April 18–28, 2000. Then after both the sampling data and the ETM data were geometrically corrected to an equal-area projection of Albers, linear relationships among the sampling data and some transformed data derived from the ETM data and the ETM 4 were calculated. The results show that the sampling data is best relative to the band 4 data with a high correlation coefficient of 0.86, followed by the DVI and NDVI data with 0.83 and 0.80 respectively. Therefore, a linear regression model, which was based on the field data and band 4 data, was used to estimate the total biomass of entire Poyang Lake, and then the map of the biomass distribution was compiled.展开更多
Four data fusion methods, principle component transform (PCT), brovey transform (BT), smoothing filter-based intensity modulation(SFIM), and hue, saturation, intensity (HSI), are used to merge Landsat-7 ETM+ multispec...Four data fusion methods, principle component transform (PCT), brovey transform (BT), smoothing filter-based intensity modulation(SFIM), and hue, saturation, intensity (HSI), are used to merge Landsat-7 ETM+ multispectral bands with ETM+ panchromatic band. Each of them improves the spatial resolution effectively but distorts the original spectral signatures to some extent. SFIM model can produce optimal fusion data with respect to preservation of spectral integrity. However, it results the most blurred and noisy image if the coregistration between the multispectral and pan images is not accurate enough. The spectral integrity for all methods is preserved better if the original multispectral images are within the spectral range of ETM+ pan image.展开更多
Up to date information about the existing land cover patterns and changes in land cover over time is one of the prime prerequisites for the preparation of an integrated development plan and economic development progra...Up to date information about the existing land cover patterns and changes in land cover over time is one of the prime prerequisites for the preparation of an integrated development plan and economic development program of a region. By using ETM＋ image data from 2002, we provided a land cover map of deciduous forest regions in Azerbaijan Province, Iran. Initial qualitative evaluation of the data showed no significant radiometric errors. Image classification was carried out using a maximum likelihood-based supervised classification method. In the end, we determined five major land cover classes, i.e., grass lands, deciduous broad-leaf forest, cultivated land, river and land without vegetation cover. Accuracy, estimated by the use of criteria such as overall accuracy from a confusion matrix of classification was 86% with a 0.88 Kappa coefficient. Such high accuracy results demonstrate that the combined use of spectral and textural characteristics increased the number of classes in the field classification, also with excellent accuracy. The availability and use of time series of remote sensing data permit the detection and quantification of land cover changes and improve our understanding of the past and present status of forest ecosystems.展开更多
Satellite remote sensing data are usually used to analyze the spatial distribution pattern of geological structures and generally serve as a significant means for the identification of alteration zones. Based on the L...Satellite remote sensing data are usually used to analyze the spatial distribution pattern of geological structures and generally serve as a significant means for the identification of alteration zones. Based on the Landsat Enhanced Thematic Mapper （ETM＋） data, which have better spectral resolution （8 bands） and spatial resolution （15 m in PAN band）, the synthesis processing techniques were presented to fulfill alteration information extraction： data preparation, vegetation indices and band ratios, and expert classifier-based classification. These techniques have been implemented in the MapGIS-RSP software （version 1.0）, developed by the Wuhan Zondy Cyber Technology Co., Ltd, China. In the study area application of extracting alteration information in the Zhaoyuan （招远） gold mines, Shandong （山东） Province, China, several hydorthermally altered zones （included two new sites） were found after satellite imagery interpretation coupled with field surveys. It is concluded that these synthesis processing techniques are useful approaches and are applicable to a wide range of gold-mineralized alteration information extraction.展开更多
Alteration is regarded as significant information for mineral exploration. In this study, ETM＋ remote sensing data are used for recognizing and extracting alteration zones in northwestern Yunnan （云南）, China. The ...Alteration is regarded as significant information for mineral exploration. In this study, ETM＋ remote sensing data are used for recognizing and extracting alteration zones in northwestern Yunnan （云南）, China. The principal component analysis （PCA） of ETM＋ bands 1, 4, 5, and 7 was employed for OH alteration extractions. The PCA of ETM＋ bands 1, 3, 4, and 5 was used for extracting Fe^2＋ （Fe^3＋） alterations. Interfering factors, such as vegetation, snow, and shadows, were masked. Alteration components were defined in the principal components （PCs） by the contributions of their diagnostic spectral bands. The zones of alteration identified from remote sensing were analyzed in detail along with geological surveys and field verification. The results show that the OH^- alteration is a main indicator of K-feldspar, phyllic, and prophilized alterations. These alterations are closely related to porphyry copper deposits. The Fe^2＋ （Fe^3＋） alteration indicates pyritization, which is mainly related to hydrothermal or skarn type polymetallic deposits.展开更多
This study aims to assess and to evaluate band ratios, brovey and HSV (Hue-Saturation-Value) techniques for discrimination and mapping the basement rock units exposed at Wadi Bulghah area, Saudi Arabia using multispec...This study aims to assess and to evaluate band ratios, brovey and HSV (Hue-Saturation-Value) techniques for discrimination and mapping the basement rock units exposed at Wadi Bulghah area, Saudi Arabia using multispectral Landsat ETM+ and SPOT-5 panchromatic data.?FieldSpec instrument is utilized to collect the spectral data of diorite, marble, gossan and volcanics, the main rock units exposed at the study area. Spectral profile of diorite exhibits very distinguished absorption features around 2.20 μm and 2.35 μm wavelength regions. These absorption features lead to lowering the band ratio values within the band-7 wavelength region. Diorite intrusions appear to have grey and dark grey image signatures on 7/3 and 7/2 band ratio images respectively. On the false color composite ratio image (7/3:R;7/2:G and 5/2:B), diorite, marble, gossan and volcanics have very dark brown, dark blue, white and yellowish brown image signatures respectively. Image fusion between previously mentioned FCC ratio image and high spatial resolution (5 meters) SPOT-5 panchromatic image is carried out by using brovey and HSV transformation methods. Visual and statistical assessment methods prove that HSV fused image yields best image interpretability results rather than brovey image. It improves the spatial resolution of the original FCC ratios image with acceptable spectral preservation.展开更多
基金The Knowledge Innovation Project of CAS, No. KZCX1-Y-02,No. KZCX2-310 The key project of Ninth Five-Year+3 种基金 Plan of CAS, No.KZ951-A1-102-01 The National Ninth Five-Year Plan Project,No.96-b02-01
文摘Poyang Lake is the largest freshwater lake in China. This paper conducted a digital and rapid investigation of the lake’s wetland vegetation biomass using Landsat ETM data acquired on April 16, 2000. First, utilizing the false color composite derived from the ETM data as one of the main references, the authors designed a reasonable sampling route for field measurement of the biomass, and carried it out on April 18–28, 2000. Then after both the sampling data and the ETM data were geometrically corrected to an equal-area projection of Albers, linear relationships among the sampling data and some transformed data derived from the ETM data and the ETM 4 were calculated. The results show that the sampling data is best relative to the band 4 data with a high correlation coefficient of 0.86, followed by the DVI and NDVI data with 0.83 and 0.80 respectively. Therefore, a linear regression model, which was based on the field data and band 4 data, was used to estimate the total biomass of entire Poyang Lake, and then the map of the biomass distribution was compiled.
文摘Four data fusion methods, principle component transform (PCT), brovey transform (BT), smoothing filter-based intensity modulation(SFIM), and hue, saturation, intensity (HSI), are used to merge Landsat-7 ETM+ multispectral bands with ETM+ panchromatic band. Each of them improves the spatial resolution effectively but distorts the original spectral signatures to some extent. SFIM model can produce optimal fusion data with respect to preservation of spectral integrity. However, it results the most blurred and noisy image if the coregistration between the multispectral and pan images is not accurate enough. The spectral integrity for all methods is preserved better if the original multispectral images are within the spectral range of ETM+ pan image.
文摘Up to date information about the existing land cover patterns and changes in land cover over time is one of the prime prerequisites for the preparation of an integrated development plan and economic development program of a region. By using ETM＋ image data from 2002, we provided a land cover map of deciduous forest regions in Azerbaijan Province, Iran. Initial qualitative evaluation of the data showed no significant radiometric errors. Image classification was carried out using a maximum likelihood-based supervised classification method. In the end, we determined five major land cover classes, i.e., grass lands, deciduous broad-leaf forest, cultivated land, river and land without vegetation cover. Accuracy, estimated by the use of criteria such as overall accuracy from a confusion matrix of classification was 86% with a 0.88 Kappa coefficient. Such high accuracy results demonstrate that the combined use of spectral and textural characteristics increased the number of classes in the field classification, also with excellent accuracy. The availability and use of time series of remote sensing data permit the detection and quantification of land cover changes and improve our understanding of the past and present status of forest ecosystems.
基金The paper is supported by the Research Foundation for Out-standing Young Teachers, China University of Geosciences (Wuhan) (Nos. CUGQNL0628, CUGQNL0640)the National High-Tech Research and Development Program (863 Program) (No. 2001AA135170)the Postdoctoral Foundation of the Shandong Zhaojin Group Co. (No. 20050262120)
文摘Satellite remote sensing data are usually used to analyze the spatial distribution pattern of geological structures and generally serve as a significant means for the identification of alteration zones. Based on the Landsat Enhanced Thematic Mapper （ETM＋） data, which have better spectral resolution （8 bands） and spatial resolution （15 m in PAN band）, the synthesis processing techniques were presented to fulfill alteration information extraction： data preparation, vegetation indices and band ratios, and expert classifier-based classification. These techniques have been implemented in the MapGIS-RSP software （version 1.0）, developed by the Wuhan Zondy Cyber Technology Co., Ltd, China. In the study area application of extracting alteration information in the Zhaoyuan （招远） gold mines, Shandong （山东） Province, China, several hydorthermally altered zones （included two new sites） were found after satellite imagery interpretation coupled with field surveys. It is concluded that these synthesis processing techniques are useful approaches and are applicable to a wide range of gold-mineralized alteration information extraction.
基金supported by the project "Remote Sensing Alteration Abnormity Extraction from Geological Survey in Northwestern Yunnan, China" from China Geological Survey
文摘Alteration is regarded as significant information for mineral exploration. In this study, ETM＋ remote sensing data are used for recognizing and extracting alteration zones in northwestern Yunnan （云南）, China. The principal component analysis （PCA） of ETM＋ bands 1, 4, 5, and 7 was employed for OH alteration extractions. The PCA of ETM＋ bands 1, 3, 4, and 5 was used for extracting Fe^2＋ （Fe^3＋） alterations. Interfering factors, such as vegetation, snow, and shadows, were masked. Alteration components were defined in the principal components （PCs） by the contributions of their diagnostic spectral bands. The zones of alteration identified from remote sensing were analyzed in detail along with geological surveys and field verification. The results show that the OH^- alteration is a main indicator of K-feldspar, phyllic, and prophilized alterations. These alterations are closely related to porphyry copper deposits. The Fe^2＋ （Fe^3＋） alteration indicates pyritization, which is mainly related to hydrothermal or skarn type polymetallic deposits.
文摘This study aims to assess and to evaluate band ratios, brovey and HSV (Hue-Saturation-Value) techniques for discrimination and mapping the basement rock units exposed at Wadi Bulghah area, Saudi Arabia using multispectral Landsat ETM+ and SPOT-5 panchromatic data.?FieldSpec instrument is utilized to collect the spectral data of diorite, marble, gossan and volcanics, the main rock units exposed at the study area. Spectral profile of diorite exhibits very distinguished absorption features around 2.20 μm and 2.35 μm wavelength regions. These absorption features lead to lowering the band ratio values within the band-7 wavelength region. Diorite intrusions appear to have grey and dark grey image signatures on 7/3 and 7/2 band ratio images respectively. On the false color composite ratio image (7/3:R;7/2:G and 5/2:B), diorite, marble, gossan and volcanics have very dark brown, dark blue, white and yellowish brown image signatures respectively. Image fusion between previously mentioned FCC ratio image and high spatial resolution (5 meters) SPOT-5 panchromatic image is carried out by using brovey and HSV transformation methods. Visual and statistical assessment methods prove that HSV fused image yields best image interpretability results rather than brovey image. It improves the spatial resolution of the original FCC ratios image with acceptable spectral preservation.
