A total of 153 soil samples were collected from Changsha City, China, to analyze the contents of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb and Zn. A combination of sampling data, multivariate statistical method, geostatistical a...A total of 153 soil samples were collected from Changsha City, China, to analyze the contents of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb and Zn. A combination of sampling data, multivariate statistical method, geostatistical analysis, direct exposure method and triangulated irregular network （TIN） model was successfully employed to discriminate sources, simulate spatial distributions and evaluate children＇s health risks of heavy metals in soils. The results show that not all sites in Changsha city may be suitable for living without remediation. About 9.0% of the study area provided a hazard index （HI）1.0, and 1.9% had an HI2.0. Most high HIs were located in the southern and western areas. The element of arsenic and the pathway of soil ingestion were the largest contribution to potential health risks for children. This study indicates that we should attach great importance to the direct soil heavy metals exposure for children＇s health.展开更多
Model for prediction of the concentration of tin extracted during potassium hydroxide leaching of cassiterite has been derived. The model: A = Nt1.53, indicates that the concentration tin extracted is dependent on the...Model for prediction of the concentration of tin extracted during potassium hydroxide leaching of cassiterite has been derived. The model: A = Nt1.53, indicates that the concentration tin extracted is dependent on the residence time. It was found that the validity of the model is rooted in the expression Log A = Log (Nt1.53). Tin extraction per unit time as obtained from experiment and derived model are 2.6666 and 2.6268 mg/min respectively. The maximum deviation of the model-predicted concentration of dissolved tin from the corresponding concentration obtained from the experiment was found to be less than 8%, which is quite within the acceptable deviation limit of experimental results and hence, impacting about 92% confidence coefficient on the model.展开更多
By means of multivariance analysis and finite element on the basis of the analysis of generation andevolution of structural systems and structural system of syn-metallogenesis in the orefield,the authorsmade a researc...By means of multivariance analysis and finite element on the basis of the analysis of generation andevolution of structural systems and structural system of syn-metallogenesis in the orefield,the authorsmade a research into the interrelation between tecto-geochemistry and structural stress field,revealedthe mechanism of metallogenesis by magma and ore-forming fluids driven under dynamic forces,andproposed a tecto-geochemistry model for the formation of the ore deposits,so as to suggest a basis oftheory for the prognoses of location and magnitude of hidden deposits.展开更多
Through studies on the element geochemistry, alteration of country rocks, ore-forming fluids and isotopegeochemistry of the Arno tin deposit in the metamorphic rocks of the Upper Proterozoic Ximeng Group, theauthors c...Through studies on the element geochemistry, alteration of country rocks, ore-forming fluids and isotopegeochemistry of the Arno tin deposit in the metamorphic rocks of the Upper Proterozoic Ximeng Group, theauthors consider that the concentration of the B-F-Li-Rb-Cs-Sn association is related to acidic magmatism inthe study area. The Fe-Mg-Li tourmaline in the ore is the replaced product of the country rocks byhypothermal fluid. The δ^(18)O values of mineral separates are +2.01- +13.16‰ and their δ^(34)S values, +2.6-+7.2‰. The ore-forming materials were derived from hydrothermal fluid of granitic magma. For themineralization, the temperature is 450°-350℃, the pressure, 450-1000×10~5 Pa, and the age, Himalayan(21.5 Ma). According to the geochemical characteristics, a minerogenic model is established: the deposit is ahypothermal cassiterite-quartz vein type tin deposit controlled by the hidden Himalayan granites.展开更多
The prediction of the thermodynamic properties of ternary systems from the properties of their sub-binary systems is of great importance to phase diagram calculations. In the present study, a new asymmetric model whic...The prediction of the thermodynamic properties of ternary systems from the properties of their sub-binary systems is of great importance to phase diagram calculations. In the present study, a new asymmetric model which has more clear physical significance has been developed for evaluating the ternary thermodynamic properties from its three binary components. The model is considered to be rigorous in the case where the pseudobinary systems of fixed X2/X3 are regular are regular solution. The application of new model to the prediction of ternary enthalpies of mixing for Bi-Ga-Sn, Au-Ag-Sn and NaCl-KCl-CaCl2 systems shows that the calculated results by new model are closer to experimental data than those by Toop's model.展开更多
This paper presents a hybrid model for three-dimensional Geographical Information Systems which is an integration of surface- and volume-based models. The Triangulated Irregular Network (TIN) and octree models are int...This paper presents a hybrid model for three-dimensional Geographical Information Systems which is an integration of surface- and volume-based models. The Triangulated Irregular Network (TIN) and octree models are integrated in this hybrid models. The TIN model works as a surface-based model which mainly serves for surface presentation and visualization. On the other hand, the octree encoding supports volumetric analysis. The designed data structure brings a major advantage in the three-dimensional selective retrieval. This technique increases the efficiency of three-dimensional data operation.展开更多
基金Project (50925417) supported by the National Funds for Distinguished Young Scientists, ChinaProject (50830301) supported by the Key Project of National Natural Science Foundation of China
文摘A total of 153 soil samples were collected from Changsha City, China, to analyze the contents of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb and Zn. A combination of sampling data, multivariate statistical method, geostatistical analysis, direct exposure method and triangulated irregular network （TIN） model was successfully employed to discriminate sources, simulate spatial distributions and evaluate children＇s health risks of heavy metals in soils. The results show that not all sites in Changsha city may be suitable for living without remediation. About 9.0% of the study area provided a hazard index （HI）1.0, and 1.9% had an HI2.0. Most high HIs were located in the southern and western areas. The element of arsenic and the pathway of soil ingestion were the largest contribution to potential health risks for children. This study indicates that we should attach great importance to the direct soil heavy metals exposure for children＇s health.
文摘Model for prediction of the concentration of tin extracted during potassium hydroxide leaching of cassiterite has been derived. The model: A = Nt1.53, indicates that the concentration tin extracted is dependent on the residence time. It was found that the validity of the model is rooted in the expression Log A = Log (Nt1.53). Tin extraction per unit time as obtained from experiment and derived model are 2.6666 and 2.6268 mg/min respectively. The maximum deviation of the model-predicted concentration of dissolved tin from the corresponding concentration obtained from the experiment was found to be less than 8%, which is quite within the acceptable deviation limit of experimental results and hence, impacting about 92% confidence coefficient on the model.
文摘By means of multivariance analysis and finite element on the basis of the analysis of generation andevolution of structural systems and structural system of syn-metallogenesis in the orefield,the authorsmade a research into the interrelation between tecto-geochemistry and structural stress field,revealedthe mechanism of metallogenesis by magma and ore-forming fluids driven under dynamic forces,andproposed a tecto-geochemistry model for the formation of the ore deposits,so as to suggest a basis oftheory for the prognoses of location and magnitude of hidden deposits.
文摘Through studies on the element geochemistry, alteration of country rocks, ore-forming fluids and isotopegeochemistry of the Arno tin deposit in the metamorphic rocks of the Upper Proterozoic Ximeng Group, theauthors consider that the concentration of the B-F-Li-Rb-Cs-Sn association is related to acidic magmatism inthe study area. The Fe-Mg-Li tourmaline in the ore is the replaced product of the country rocks byhypothermal fluid. The δ^(18)O values of mineral separates are +2.01- +13.16‰ and their δ^(34)S values, +2.6-+7.2‰. The ore-forming materials were derived from hydrothermal fluid of granitic magma. For themineralization, the temperature is 450°-350℃, the pressure, 450-1000×10~5 Pa, and the age, Himalayan(21.5 Ma). According to the geochemical characteristics, a minerogenic model is established: the deposit is ahypothermal cassiterite-quartz vein type tin deposit controlled by the hidden Himalayan granites.
文摘The prediction of the thermodynamic properties of ternary systems from the properties of their sub-binary systems is of great importance to phase diagram calculations. In the present study, a new asymmetric model which has more clear physical significance has been developed for evaluating the ternary thermodynamic properties from its three binary components. The model is considered to be rigorous in the case where the pseudobinary systems of fixed X2/X3 are regular are regular solution. The application of new model to the prediction of ternary enthalpies of mixing for Bi-Ga-Sn, Au-Ag-Sn and NaCl-KCl-CaCl2 systems shows that the calculated results by new model are closer to experimental data than those by Toop's model.
文摘This paper presents a hybrid model for three-dimensional Geographical Information Systems which is an integration of surface- and volume-based models. The Triangulated Irregular Network (TIN) and octree models are integrated in this hybrid models. The TIN model works as a surface-based model which mainly serves for surface presentation and visualization. On the other hand, the octree encoding supports volumetric analysis. The designed data structure brings a major advantage in the three-dimensional selective retrieval. This technique increases the efficiency of three-dimensional data operation.
