Flapping Wing Micro Aerial Vehicles(FWMAVs)have caused great concern in various fields because of their high efficiency and maneuverability.Flapping wing motion is a very important factor that affects the performance ...Flapping Wing Micro Aerial Vehicles(FWMAVs)have caused great concern in various fields because of their high efficiency and maneuverability.Flapping wing motion is a very important factor that affects the performance of the aircraft,and previous works have always focused on the time-averaged performance optimization.However,the time-history performance is equally important in the design of motion mechanism and flight control system.In this paper,a time-history performance optimization framework based on deep learning and multi-island genetic algorithm is presented,which is designed in order to obtain the optimal two-dimensional flapping wing motion.Firstly,the training dataset for deep learning neural network is constructed based on a validated computational fluid dynamics method.The aerodynamic surrogate model for flapping wing is obtained after the convergence of training.The surrogate model is tested and proved to be able to accurately and quickly predict the time-history curves of lift,thrust and moment.Secondly,the optimization framework is used to optimize the flapping wing motion in two specific cases,in which the optimized propulsive efficiencies have been improved by over 40%compared with the baselines.Thirdly,a dimensionless parameter C_(variation)is proposed to describe the variation of the time-history characteristics,and it is found that C_(variation)of lift varies significantly even under close time-averaged performances.Considering the importance of time-history performance in practical applications,the optimization that integrates the propulsion efficiency as well as C_(variation)is carried out.The final optimal flapping wing motion balances good time-averaged and time-history performance.展开更多
The time-history responses of the surface were obtained for a linear elastic half-plane including regularly distributed enormous embedded circular cavities subjected to propagating obliquely incident plane SH-waves. A...The time-history responses of the surface were obtained for a linear elastic half-plane including regularly distributed enormous embedded circular cavities subjected to propagating obliquely incident plane SH-waves. An advanced numerical approach named half-plane time-domain boundary element method（BEM）, which only located the meshes around the cavities, was used to create the model. By establishing the modified boundary integral equation（BIE）independently for each cavity and forming the matrices, the final coupled equation was solved step-by-step in the timedomain to obtain the boundary values. The responses were developed for a half-plane with 512 cavities. The amplification patterns were also obtained to illustrate the frequencydomain responses for some cases. According to the results,the presence of enormous cavities affects the scattering and diffraction of the waves arrived to the surface. The introduced method can be recommended for geotechnical/mechanical engineers to model structures in the fields of earthquake engineering and composite materials.展开更多
Concentration time-histories of H20 were measured behind reflected shock waves during hydrogen combustion. Experiments were conducted at temperatures of 1117-1282 K, the equivalence ratios of 0.5 and 0.25, and a press...Concentration time-histories of H20 were measured behind reflected shock waves during hydrogen combustion. Experiments were conducted at temperatures of 1117-1282 K, the equivalence ratios of 0.5 and 0.25, and a pressure at 2 atm using a mixture of H2/O2 highly diluted with argon. H2O was monitored using tunable mid-infrared diode laser absorption at 2.55 μm （3920.09 cm-1）. These time-histories provide kinetic targets to test and refine reaction mechanisms for hydrogen. Comparisons were made with the predictions of four detailed kinetic mechanisms published in the last four years. Such comparisons of H2O concentration profiles indicate that the AramcoMech 2.0 mechanism yields the best agreement with the experimental data, while CRECK, San Diego, and HP-Mech mechanisms show significantly poor predictions. Reaction pathway analysis for hydrogen oxidation indicates that the reaction H ＋ OH ＋ M = H20 ＋ M is the key reaction for controlling the H2O formation by hydrogen oxidation. It is inferred that the discrepancy of the conversion percentage from H to H20 among these four mechanisms induces the difference of performance on H2O time-history predictions. This work demonstrates the potential of time-history measurement for validation of large reaction mechanisms.展开更多
Structures modelled with flexible-base assumptions,incorporating soil effects,generally exhibit longer natural periods and higher damping compared to fixed-base models that exclude soil-structure interaction(SSI).Howe...Structures modelled with flexible-base assumptions,incorporating soil effects,generally exhibit longer natural periods and higher damping compared to fixed-base models that exclude soil-structure interaction(SSI).However,the beneficial or detrimental nature of SSI remains contentious in current earthquake damage analyses and research findings.This study introduces a numerical modelling technique,validated by experimental shaking table tests,to examine the effects of SSI on high-rise buildings.The study considers various substructure parameters,including foundation types,soil types,and bedrock depths.Both advantageous and adverse impacts of SSI are identified and analysed.Numerical simulations reveal that increased subsoil stiffness significantly amplifies the base shear of structures compared to bedrock depth effects.Additionally,increased foundation rocking results in higher inter-storey drifts and reduced base shear.Overall,SSI tends to amplify inter-storey drifts,indicating detrimental effects.Specifically,the study found that the inclusion of SSI increased maximum inter-storey drifts by up to 38%,particularly in softer soils,while reducing base shear by up to 44%in structures with classical compensated foundations on D_(e)and E_(e)soil types.In contrast,piled foundation systems experienced an increase in base shear of up to 27%under the same conditions.Conversely,SSI has beneficial impacts on base shear for structures with classical compensated foundations on soil types of D_(e)and E_(e),as it reduces the base shear.For structures with piled foundations and those with classical compensated foundations on C_(e)soil,SSI effects are detrimental.C_(e),D_(e),and E_(e)soils correspond to geotechnical classifications per AS1170,representing stiff,medium,and soft soils respectively.The study also presents minimum base shear ratios considering SSI reduction effects for various foundation types.展开更多
The seismic intensity is generally high in the Qinghai-Tibet Plateau region of China.The seismic performance of the new prefabricated modular pressurized buildings used to solve the plateau response is insufficient.To...The seismic intensity is generally high in the Qinghai-Tibet Plateau region of China.The seismic performance of the new prefabricated modular pressurized buildings used to solve the plateau response is insufficient.To solve this problem,the small friction pendulum bearing(FPB)isolation design is proposed for modular pressurized buildings.Firstly,a simplified model of cross-truss support for the pressurized module is proposed to simplify the modeling and calculation of the pressurized buildings.The reasonability of the simplified model is verified by comparing the refined finite element model.Subsequently,according to the FPB design process for modular pressurized buildings,a small FPB for isolation is provided for a two-story modular pressurized building under 8-degree fortification earthquakes.Lastly,the seismic effectiveness and constructional feasibility of the isolation structure are verified compared with the non-isolated structure using dynamic time-history analysis.The study results show that the size of FPBs for modular pressurized buildings should consider both displacement and dimension requirements to weigh seismic isolation performance and installation feasibility,respectively.When adopting FPBs,the response of the structure is significantly reduced,and the seismic isolation effect is obvious.The proposed construction process can improve the seismic resilience of the prefabricated modular pressurized buildings by replacing post-earthquake damaged components quickly.It provides ideas for the seismic isolation design of the prefabricated modular pressurized buildings in high seismic intensity areas.展开更多
Actuator dynamics introduce a synchronization disparity between commanded displacements transmitted to the actuator and the actual displacements generated by the actuator,thereby affecting its precision and potentiall...Actuator dynamics introduce a synchronization disparity between commanded displacements transmitted to the actuator and the actual displacements generated by the actuator,thereby affecting its precision and potentially leading to instability in real-time hybrid simulation(RTHS).This study aims to elucidate the relationship between calculated and measured displacements by analyzing their magnitude and phase in the frequency domain via transformations.The physical implications of these relationships are explored in the context of frequency domain evaluation indices(FEI),the transfer function of actuator dynamics,and delay compensation.Formulations for achieving perfect compensation of actuator dynamics are developed,and an enhanced compensation approach,termed improved windowed frequency domain evaluation index-based compensation(IWFEI),is introduced.The efficacy of IWFEI is assessed using a RTHS benchmark model,with perturbed simulations conducted to validate its robustness.Uncertainties inherent in actuator dynamics are represented as random variables in these simulations.Comparative analysis of the mean values and variances of evaluation criteria demonstrates that IWFEI enables more accurate and robust compensation.Furthermore,strong correlations observed among criteria in the time and frequency domains underscore the effectiveness of the proposed frequency domain-based compensation method in mitigating amplitude errors and phase delays in RTHS.展开更多
In this work,a new methodology is presented to mainly solve the fluid–solid interaction(FSI)equation.This methodology combines the advantages of the Newmark precise integral method(NPIM)and the dual neural network(DN...In this work,a new methodology is presented to mainly solve the fluid–solid interaction(FSI)equation.This methodology combines the advantages of the Newmark precise integral method(NPIM)and the dual neural network(DNN)method.The NPIM is employed to modify the exponential matrix and loading vector based on the DNN integral method.This involves incorporating the basic assumption of the Newmark-βmethod into the dynamic equation and eliminating the acceleration term from the dynamic equilibrium equation.As a result,the equation is reduced to a first-order linear equation system.Subsequently,the PIM is applied to integrate the system step by step within the NPIM.The DNN method is adopted to solve the inhomogeneous term through fitting the integrand and the original function with a pair of neural networks,and the integral term is solved using the Newton–Leibniz formula.Numerical examples demonstrate that the proposed methodology significantly improves computing efficiency and provides sufficient precision compared to the DNN method.This is particularly evident when analyzing large-scale structures under blast loading conditions.展开更多
In this study, four 1/5 scaled shaking table tests were conducted to investigate the seismic performance of recycled concrete frame-shear wall structures with different recycled aggregates replacement rates and concea...In this study, four 1/5 scaled shaking table tests were conducted to investigate the seismic performance of recycled concrete frame-shear wall structures with different recycled aggregates replacement rates and concealed bracing detail. The four tested structures included one normal concrete model, one recycled coarse aggregate concrete model, and two recycled coarse and fi ne aggregate concrete models with or without concealed bracings inside the shear walls. The dynamic characteristics, dynamic response and failure mode of each model were compared and analyzed. Finite element models were also developed and nonlinear time-history response analysis was conducted. The test and analysis results show that the seismic performance of the recycled coarse aggregate concrete frame-shear wall structure is slightly worse than the normal concrete structure. The seismic resistance capacity of the recycled concrete frame-shear wall structure can be greatly improved by setting up concealed bracings inside the walls. With appropriate design, the recycled coarse aggregate concrete frame-shear wall structure and recycled concrete structure with concealed bracings inside the walls can be applied in buildings.展开更多
Theoretical analysis and wind tunnel tests were carried out to study wind-induced intemal pressure response for the structure with single windward opening and background leakage. Its goveming differential equation was...Theoretical analysis and wind tunnel tests were carried out to study wind-induced intemal pressure response for the structure with single windward opening and background leakage. Its goveming differential equation was derived by the Bemoulli equation in an unsteady-isentropic form. Numerical examples were provided to study the additive damping caused by background leakage in laminar and turbulent flow, and the influence of background leakage on fluctuating internal pressure response was quantized. A series of models for low-rise building with various opening ratios and background leakage were designed and wind tunnel tests were conducted. It is shown that the fluctuating intemal pressure reduces when the background leakage are considered and that the effect of background leakage can be predicted accurately by the governing differential equation deduced in this paper.展开更多
A 3D finite element model of the Huaiyin third pumping station of the Eastern Route of the South-to-North Water Transfer is described in this paper. Two methods were used in the calculation and vibration analysis of t...A 3D finite element model of the Huaiyin third pumping station of the Eastern Route of the South-to-North Water Transfer is described in this paper. Two methods were used in the calculation and vibration analysis of the pumping station in both the time domain and the frequency domain. The pressure pulsation field of the whole flow passage was structured on the basis of pressure pulsations recorded at some locations of the physical model test. Dynamic time-history analysis of the pump house under pressure pulsations was carried out. At the same time, according to spectrum characteristics of the pressure pulsations at measuring points and results of free vibration characteristics analysis of the pump house, the spectrum analysis method of random vibration was used to calculate dynamic responses of the pump house. Results from both methods are consistent, which indicates that they are both reasonable. The results can be used for reference in anti-vibration safety evaluation of the Huaiyin third pumping station.展开更多
Modern Earthquake Risk Assessment（ERA） methods usually require seismo-tectonic information for Probabilistic Seismic Hazard Assessment（PSHA） that may not be readily available in developing countries. To bypass thi...Modern Earthquake Risk Assessment（ERA） methods usually require seismo-tectonic information for Probabilistic Seismic Hazard Assessment（PSHA） that may not be readily available in developing countries. To bypass this drawback, this paper presents a practical event-based PSHA method that uses instrumental seismicity, available historical seismicity, as well as limited information on geology and tectonic setting. Historical seismicity is integrated with instrumental seismicity to determine the long-term hazard. The tectonic setting is included by assigning seismic source zones associated with known major faults. Monte Carlo simulations are used to generate earthquake catalogues with randomized key hazard parameters. A case study region in Pakistan is selected to demonstrate the effectiveness of the method. The results indicate that the proposed method produces seismic hazard maps consistent with previous studies, thus being suitable for generating such maps in regions where limited data are available. The PSHA procedure is developed as an integral part of an ERA framework named EQRAM. The framework is also used to determine seismic risk in terms of annual losses for the study region.展开更多
A rigid central buckle is employed in Runyang Suspension Bridge （RSB） to replace commonly used short suspenders in the main span. Based on the seismic waves with 2% probabilities of exceedance, the nonlinear seismic...A rigid central buckle is employed in Runyang Suspension Bridge （RSB） to replace commonly used short suspenders in the main span. Based on the seismic waves with 2% probabilities of exceedance, the nonlinear seismic response time-domain analysis are then conducted and influence of central buckles on seismic response of long-span suspension bridge is specially studied. Analysis resuits show that the central buckle can effectively control the longitudinal floating vibration mode of the deck, and therefore reduce earthquake-excited longitudinal displacement at the end of the deck. However, the central buckle may cause increment of longitudinal displacement at the top of main tower and bending moment at the bottom of the main tower, which should be paid special attention to. Results provide references for anti-earthquake analysis and design of long-span suspension bridges using rigid central buckles.展开更多
Input ground motions have significant impacts on the uncertainty of structural responses in time-history analysis.In this study,records were selected and scaled for the evaluation of mean structural responses accordin...Input ground motions have significant impacts on the uncertainty of structural responses in time-history analysis.In this study,records were selected and scaled for the evaluation of mean structural responses according to the target spectrum.The Newmark-Hall spectrum is closely related to seismic response of short,medium and long-period structures,so it was taken as the target spectrum here.The nonlinear time-history analyses of 9-story and 20-story steel moment-resisting frame structures were carried out as examples.They represent medium and long-period buildings,respectively.Three target spectra with risk of 50%,10%and 2%probabilities for exceedance in 50 years were calculated by the average Newmark-Hall spectrum method for three ground motion sets developed in the SAC Steel Project.The predicted structural mean responses of these Newmark-Hall spectra were compared with those calculated by the average spectral acceleration method for the same record set.It is found that both methods have similar accuracy for estimating the structural mean response.However,the method proposed herein is more effective in reducing the variability of the structural responses.Also,the proposed method is more advantageous for the time-history analysis of long-period structures or structures with more severe nonlinear responses under strong seismic excitations.展开更多
The practical design of the cable-stayed bridge of the 3rd Macao-Taipa bridge is investigated by the finite element analysis program ANSYS, and 3-D elements BEAM188 and BEAM4 are adopted to create a dynamic calculati...The practical design of the cable-stayed bridge of the 3rd Macao-Taipa bridge is investigated by the finite element analysis program ANSYS, and 3-D elements BEAM188 and BEAM4 are adopted to create a dynamic calculation model. In order to analyze the material nonlinear seismic response of the cable-stayed bridge, the nonlinear behaviors of the ductile plastic hinges of the bridge towers are taken into account by employing the nonlinear rotational spring element COMBIN40. To simulate a major earthquake, three earthquake records were chosen using a wave-choosing program and input into the bridge structure along longitudinal and transversal directions. Comparisons of the linear and nonlinear seismic responses of the cable-stayed bridge are performed. In addition, a study of TMD primary control is carried out using element MASS21 and element COMBIN14, and it is indicated that the effects of mitigation monitoring are evident.展开更多
This paper focuses on the seismic performance of mountainous railway bridges having different pier type i.e. rectangular hollow piers and solid piers. The piers used were of same materials and inertial properties. For...This paper focuses on the seismic performance of mountainous railway bridges having different pier type i.e. rectangular hollow piers and solid piers. The piers used were of same materials and inertial properties. For this, 3-D FEM models of these bridges were created by ANSYS 15.0. For seismic assessment, Response Spectrum and Dynamic Time-History Analysis methods were adopted. Different types of earthquake waves used were Elcentro, Wenchuan and Nepal earthquakes, all normalized to 0.3 g Peak Ground Acceleration (PGA). The study concluded that even though the hollow pier bridges are susceptible to large displacements, its dealing with internal forces is remarkable compared to solid pier bridges.展开更多
The aim of this paper is to assess the accuracy of brace models formulated in Drain 2DX and OpenSees by comparing the simulated results with those obtained from experimental tests. Both, Drain 2DX and OpenSees rely on...The aim of this paper is to assess the accuracy of brace models formulated in Drain 2DX and OpenSees by comparing the simulated results with those obtained from experimental tests. Both, Drain 2DX and OpenSees rely on the physical theory brace model. In this study, experimental tests conducted on the behaviour of structural hollow section braces subjected to symmetric and asymmetric quasi-static cyclic loading were selected for calibrating the numerical model. In addition, the predicted failure strain parameter resulted from a proposed empirical equation as a function of slenderness ratio, width-to-thickness ratio and steel properties was used to define the low-cycle fatigue material that was assigned to model braces in OpenSees. It is concluded that both Drain 2DX and OpenSees brace models give a good prediction in terms of maximum tensile and buckling force, as well as interstorey drift. However, in Drain 2DX, the brace model is not able to replicate the out-of-plan buckling and the braced frame model cannot provide an accurate response when the system experiences highly nonlinear demand. To emphasise the differences in performance between Drain 2DX and OpenSees, the behaviour of a 4-storey concentrically braced frame with zipper bracing configuration, located in Victoria, BC, was investigated.展开更多
It is helpful to improve the seismic design theory of long-span continuous bridges for studying the seismic performance of each cantilever construction state.Taking the Bridge 1 in the north of Changbai-Mountain inter...It is helpful to improve the seismic design theory of long-span continuous bridges for studying the seismic performance of each cantilever construction state.Taking the Bridge 1 in the north of Changbai-Mountain international tourism resort as an example,the authors studied it in shutdown phase and the cantilever construction process,established the simulation model by using Midas / civil,and analyzed time-history of each construction stage for the bridge.The study shows that long-span bridge cantilever construction in northeastern China can be divided into two-year tasks for construction(suspending in winter).It is needed to think about seismic stability of the cantilever position in shut-down phase of winter.The effect of longitudinal vibration is the most disadvantageous influence to bridge,and its calculation results can provide reference for seismic design of similar bridges in the future.展开更多
In Europe, computation of displacement demand for seismic assessment of existing buildings is essentially based on a simplified formulation of the N2 method as prescribed by Eurocode 8(EC8). However, a lack of accurac...In Europe, computation of displacement demand for seismic assessment of existing buildings is essentially based on a simplified formulation of the N2 method as prescribed by Eurocode 8(EC8). However, a lack of accuracy of the N2 method in certain conditions has been pointed out by several studies. This paper addresses the assessment of effectiveness of the N2 method in seismic displacement demand determination in non-linear domain. The objective of this work is to investigate the accuracy of the N2 method through comparison with displacement demands computed using non-linear timehistory analysis(NLTHA). Results show that the original N2 method may lead to overestimation or underestimation of displacement demand predictions. This may affect results of mechanical model-based assessment of seismic vulnerability at an urban scale. Hence, the second part of this paper addresses an improvement of the N2 method formula by empirical evaluation of NLTHA results based on EC8 ground-classes. This task is formulated as a mathematical programming problem in which coefficients are obtained by minimizing the overall discrepancy between NLTHA and modified formula results. Various settings of the mathematical programming problem have been solved using a global optimization metaheuristic. An extensive comparison between the original N2 method formulation and optimized formulae highlights benefits of the strategy.展开更多
This study presents earthquake performance analysis of the Torul Concrete-Faced Rockfill （CFR） Dam with two-dimensional dam-soil and dam-soil-reservoir finite element models. The Lagrangian approach was used with fl...This study presents earthquake performance analysis of the Torul Concrete-Faced Rockfill （CFR） Dam with two-dimensional dam-soil and dam-soil-reservoir finite element models. The Lagrangian approach was used with fluid elements to model impounded water. The interface elements were used to simulate the slippage between the concrete face slab and the rockfill. The horizontal component of the 1992 Erzincan earthquake, with a peak ground acceleration of 0.515g, was considered in time-history analysis. The Drucker-Prager model was preferred in nonlinear analysis of the concrete slab, rockfill and foundation soil. The maximum principal stresses and the maximum displacements in two opposite directions were compared by the height of the concrete slab according to linear time-history analysis to reveal the effect of reservoir water. The changes of critical displacements and principal stresses with time are also shown in this paper. According to linear and nonlinear time-history analysis, the effect of the reservoir water on the earthquake performance of the Torul CFR Dam was investigated and the possible damage situation was examined. The results show that the hydrodynamic pressure of reservoir water leads to an increase in the maximum displacements and principal stresses of the dam and reduces the earthquake performance of the dam. Although the linear time-history analysis demonstrates that the earthquake causes a momentous damage to the concrete slab of the Torul CFR Dam, the nonlinear time-history analysis shows that no evident damage occurs in either reservoir case.展开更多
Wind loading is a dominant factor for design of a cable-membrane structure. Three orthogonal turbulent components, including the longitudinal, lateral and vertical wind velocities, should be taken into account for the...Wind loading is a dominant factor for design of a cable-membrane structure. Three orthogonal turbulent components, including the longitudinal, lateral and vertical wind velocities, should be taken into account for the wind loads. In this study, a stochastic 3D coupling wind field model is derived by the spectral representation theory. The coherence functions of the three orthogonal turbulent components are considered in this model. Then the model is applied to generate the three correlated wind turbulent components. After that, formulae are proposed to transform the velocities into wind loads, and to introduce the modified wind pressure force. Finally, a wind-induced time-history response analysis is conducted for a 3D cable-membrane structure. Analytical results indicate that responses induced by the proposed wind load model are 10%-25% larger than those by the con- ventional uncorrelated model, and that the responses are not quite influenced by the modified wind pressure force. Therefore, we concluded that, in the time-history response analysis, the coherences of the three orthogonal turbulent components are necessary for a 3D cable-membrane structure, but the modified wind pressure force can be ignored.展开更多
基金This work was supported by the specialized research projects of Huanjiang Laboratory,and the Defence Industrial Technology Development Programme,China(Nos.JCKY2019205A006,JCKY2021205B003).
文摘Flapping Wing Micro Aerial Vehicles(FWMAVs)have caused great concern in various fields because of their high efficiency and maneuverability.Flapping wing motion is a very important factor that affects the performance of the aircraft,and previous works have always focused on the time-averaged performance optimization.However,the time-history performance is equally important in the design of motion mechanism and flight control system.In this paper,a time-history performance optimization framework based on deep learning and multi-island genetic algorithm is presented,which is designed in order to obtain the optimal two-dimensional flapping wing motion.Firstly,the training dataset for deep learning neural network is constructed based on a validated computational fluid dynamics method.The aerodynamic surrogate model for flapping wing is obtained after the convergence of training.The surrogate model is tested and proved to be able to accurately and quickly predict the time-history curves of lift,thrust and moment.Secondly,the optimization framework is used to optimize the flapping wing motion in two specific cases,in which the optimized propulsive efficiencies have been improved by over 40%compared with the baselines.Thirdly,a dimensionless parameter C_(variation)is proposed to describe the variation of the time-history characteristics,and it is found that C_(variation)of lift varies significantly even under close time-averaged performances.Considering the importance of time-history performance in practical applications,the optimization that integrates the propulsion efficiency as well as C_(variation)is carried out.The final optimal flapping wing motion balances good time-averaged and time-history performance.
文摘The time-history responses of the surface were obtained for a linear elastic half-plane including regularly distributed enormous embedded circular cavities subjected to propagating obliquely incident plane SH-waves. An advanced numerical approach named half-plane time-domain boundary element method（BEM）, which only located the meshes around the cavities, was used to create the model. By establishing the modified boundary integral equation（BIE）independently for each cavity and forming the matrices, the final coupled equation was solved step-by-step in the timedomain to obtain the boundary values. The responses were developed for a half-plane with 512 cavities. The amplification patterns were also obtained to illustrate the frequencydomain responses for some cases. According to the results,the presence of enormous cavities affects the scattering and diffraction of the waves arrived to the surface. The introduced method can be recommended for geotechnical/mechanical engineers to model structures in the fields of earthquake engineering and composite materials.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2017YFB0202400 and 2017YFB0202401)
文摘Concentration time-histories of H20 were measured behind reflected shock waves during hydrogen combustion. Experiments were conducted at temperatures of 1117-1282 K, the equivalence ratios of 0.5 and 0.25, and a pressure at 2 atm using a mixture of H2/O2 highly diluted with argon. H2O was monitored using tunable mid-infrared diode laser absorption at 2.55 μm （3920.09 cm-1）. These time-histories provide kinetic targets to test and refine reaction mechanisms for hydrogen. Comparisons were made with the predictions of four detailed kinetic mechanisms published in the last four years. Such comparisons of H2O concentration profiles indicate that the AramcoMech 2.0 mechanism yields the best agreement with the experimental data, while CRECK, San Diego, and HP-Mech mechanisms show significantly poor predictions. Reaction pathway analysis for hydrogen oxidation indicates that the reaction H ＋ OH ＋ M = H20 ＋ M is the key reaction for controlling the H2O formation by hydrogen oxidation. It is inferred that the discrepancy of the conversion percentage from H to H20 among these four mechanisms induces the difference of performance on H2O time-history predictions. This work demonstrates the potential of time-history measurement for validation of large reaction mechanisms.
文摘Structures modelled with flexible-base assumptions,incorporating soil effects,generally exhibit longer natural periods and higher damping compared to fixed-base models that exclude soil-structure interaction(SSI).However,the beneficial or detrimental nature of SSI remains contentious in current earthquake damage analyses and research findings.This study introduces a numerical modelling technique,validated by experimental shaking table tests,to examine the effects of SSI on high-rise buildings.The study considers various substructure parameters,including foundation types,soil types,and bedrock depths.Both advantageous and adverse impacts of SSI are identified and analysed.Numerical simulations reveal that increased subsoil stiffness significantly amplifies the base shear of structures compared to bedrock depth effects.Additionally,increased foundation rocking results in higher inter-storey drifts and reduced base shear.Overall,SSI tends to amplify inter-storey drifts,indicating detrimental effects.Specifically,the study found that the inclusion of SSI increased maximum inter-storey drifts by up to 38%,particularly in softer soils,while reducing base shear by up to 44%in structures with classical compensated foundations on D_(e)and E_(e)soil types.In contrast,piled foundation systems experienced an increase in base shear of up to 27%under the same conditions.Conversely,SSI has beneficial impacts on base shear for structures with classical compensated foundations on soil types of D_(e)and E_(e),as it reduces the base shear.For structures with piled foundations and those with classical compensated foundations on C_(e)soil,SSI effects are detrimental.C_(e),D_(e),and E_(e)soils correspond to geotechnical classifications per AS1170,representing stiff,medium,and soft soils respectively.The study also presents minimum base shear ratios considering SSI reduction effects for various foundation types.
基金supported by Technology Research and Development Program of China Construction Advanced Technology Research Institute(Grant No.XJY-2024-16)。
文摘The seismic intensity is generally high in the Qinghai-Tibet Plateau region of China.The seismic performance of the new prefabricated modular pressurized buildings used to solve the plateau response is insufficient.To solve this problem,the small friction pendulum bearing(FPB)isolation design is proposed for modular pressurized buildings.Firstly,a simplified model of cross-truss support for the pressurized module is proposed to simplify the modeling and calculation of the pressurized buildings.The reasonability of the simplified model is verified by comparing the refined finite element model.Subsequently,according to the FPB design process for modular pressurized buildings,a small FPB for isolation is provided for a two-story modular pressurized building under 8-degree fortification earthquakes.Lastly,the seismic effectiveness and constructional feasibility of the isolation structure are verified compared with the non-isolated structure using dynamic time-history analysis.The study results show that the size of FPBs for modular pressurized buildings should consider both displacement and dimension requirements to weigh seismic isolation performance and installation feasibility,respectively.When adopting FPBs,the response of the structure is significantly reduced,and the seismic isolation effect is obvious.The proposed construction process can improve the seismic resilience of the prefabricated modular pressurized buildings by replacing post-earthquake damaged components quickly.It provides ideas for the seismic isolation design of the prefabricated modular pressurized buildings in high seismic intensity areas.
基金Ministry of Science and Technology of China under Grant No.2023YFC3804300National Science Foundation of China under Grant No.52178114。
文摘Actuator dynamics introduce a synchronization disparity between commanded displacements transmitted to the actuator and the actual displacements generated by the actuator,thereby affecting its precision and potentially leading to instability in real-time hybrid simulation(RTHS).This study aims to elucidate the relationship between calculated and measured displacements by analyzing their magnitude and phase in the frequency domain via transformations.The physical implications of these relationships are explored in the context of frequency domain evaluation indices(FEI),the transfer function of actuator dynamics,and delay compensation.Formulations for achieving perfect compensation of actuator dynamics are developed,and an enhanced compensation approach,termed improved windowed frequency domain evaluation index-based compensation(IWFEI),is introduced.The efficacy of IWFEI is assessed using a RTHS benchmark model,with perturbed simulations conducted to validate its robustness.Uncertainties inherent in actuator dynamics are represented as random variables in these simulations.Comparative analysis of the mean values and variances of evaluation criteria demonstrates that IWFEI enables more accurate and robust compensation.Furthermore,strong correlations observed among criteria in the time and frequency domains underscore the effectiveness of the proposed frequency domain-based compensation method in mitigating amplitude errors and phase delays in RTHS.
基金supported by the National Natural Science Foundation of China(Grant Nos.12072288,U2241274,and 12272319).
文摘In this work,a new methodology is presented to mainly solve the fluid–solid interaction(FSI)equation.This methodology combines the advantages of the Newmark precise integral method(NPIM)and the dual neural network(DNN)method.The NPIM is employed to modify the exponential matrix and loading vector based on the DNN integral method.This involves incorporating the basic assumption of the Newmark-βmethod into the dynamic equation and eliminating the acceleration term from the dynamic equilibrium equation.As a result,the equation is reduced to a first-order linear equation system.Subsequently,the PIM is applied to integrate the system step by step within the NPIM.The DNN method is adopted to solve the inhomogeneous term through fitting the integrand and the original function with a pair of neural networks,and the integral term is solved using the Newton–Leibniz formula.Numerical examples demonstrate that the proposed methodology significantly improves computing efficiency and provides sufficient precision compared to the DNN method.This is particularly evident when analyzing large-scale structures under blast loading conditions.
基金National Science and Technology Support Program of China under Grant No.2011BAJ08B02Natural Science Foundation of Beijing under Grant No.8132016Beijing City University Youth Backbone Talent Training Project under Grant No.PHR201108009
文摘In this study, four 1/5 scaled shaking table tests were conducted to investigate the seismic performance of recycled concrete frame-shear wall structures with different recycled aggregates replacement rates and concealed bracing detail. The four tested structures included one normal concrete model, one recycled coarse aggregate concrete model, and two recycled coarse and fi ne aggregate concrete models with or without concealed bracings inside the shear walls. The dynamic characteristics, dynamic response and failure mode of each model were compared and analyzed. Finite element models were also developed and nonlinear time-history response analysis was conducted. The test and analysis results show that the seismic performance of the recycled coarse aggregate concrete frame-shear wall structure is slightly worse than the normal concrete structure. The seismic resistance capacity of the recycled concrete frame-shear wall structure can be greatly improved by setting up concealed bracings inside the walls. With appropriate design, the recycled coarse aggregate concrete frame-shear wall structure and recycled concrete structure with concealed bracings inside the walls can be applied in buildings.
基金Project (No. 50578144) supported by the National Natural ScienceFoundation of China
文摘Theoretical analysis and wind tunnel tests were carried out to study wind-induced intemal pressure response for the structure with single windward opening and background leakage. Its goveming differential equation was derived by the Bemoulli equation in an unsteady-isentropic form. Numerical examples were provided to study the additive damping caused by background leakage in laminar and turbulent flow, and the influence of background leakage on fluctuating internal pressure response was quantized. A series of models for low-rise building with various opening ratios and background leakage were designed and wind tunnel tests were conducted. It is shown that the fluctuating intemal pressure reduces when the background leakage are considered and that the effect of background leakage can be predicted accurately by the governing differential equation deduced in this paper.
基金supported by the National Science and Technology Support Program of China (Program for theEleventh Five-Year Plan, Grant No. 2006BAB04A03)the National Natural Science Foundation of China(Grant No. 10702019)
文摘A 3D finite element model of the Huaiyin third pumping station of the Eastern Route of the South-to-North Water Transfer is described in this paper. Two methods were used in the calculation and vibration analysis of the pumping station in both the time domain and the frequency domain. The pressure pulsation field of the whole flow passage was structured on the basis of pressure pulsations recorded at some locations of the physical model test. Dynamic time-history analysis of the pump house under pressure pulsations was carried out. At the same time, according to spectrum characteristics of the pressure pulsations at measuring points and results of free vibration characteristics analysis of the pump house, the spectrum analysis method of random vibration was used to calculate dynamic responses of the pump house. Results from both methods are consistent, which indicates that they are both reasonable. The results can be used for reference in anti-vibration safety evaluation of the Huaiyin third pumping station.
文摘Modern Earthquake Risk Assessment（ERA） methods usually require seismo-tectonic information for Probabilistic Seismic Hazard Assessment（PSHA） that may not be readily available in developing countries. To bypass this drawback, this paper presents a practical event-based PSHA method that uses instrumental seismicity, available historical seismicity, as well as limited information on geology and tectonic setting. Historical seismicity is integrated with instrumental seismicity to determine the long-term hazard. The tectonic setting is included by assigning seismic source zones associated with known major faults. Monte Carlo simulations are used to generate earthquake catalogues with randomized key hazard parameters. A case study region in Pakistan is selected to demonstrate the effectiveness of the method. The results indicate that the proposed method produces seismic hazard maps consistent with previous studies, thus being suitable for generating such maps in regions where limited data are available. The PSHA procedure is developed as an integral part of an ERA framework named EQRAM. The framework is also used to determine seismic risk in terms of annual losses for the study region.
文摘A rigid central buckle is employed in Runyang Suspension Bridge （RSB） to replace commonly used short suspenders in the main span. Based on the seismic waves with 2% probabilities of exceedance, the nonlinear seismic response time-domain analysis are then conducted and influence of central buckles on seismic response of long-span suspension bridge is specially studied. Analysis resuits show that the central buckle can effectively control the longitudinal floating vibration mode of the deck, and therefore reduce earthquake-excited longitudinal displacement at the end of the deck. However, the central buckle may cause increment of longitudinal displacement at the top of main tower and bending moment at the bottom of the main tower, which should be paid special attention to. Results provide references for anti-earthquake analysis and design of long-span suspension bridges using rigid central buckles.
基金National Natural Science Foundation of Hebei Province under Grant No.E2020202038the National Natural Science Foundation of China under Grant No.51778206。
文摘Input ground motions have significant impacts on the uncertainty of structural responses in time-history analysis.In this study,records were selected and scaled for the evaluation of mean structural responses according to the target spectrum.The Newmark-Hall spectrum is closely related to seismic response of short,medium and long-period structures,so it was taken as the target spectrum here.The nonlinear time-history analyses of 9-story and 20-story steel moment-resisting frame structures were carried out as examples.They represent medium and long-period buildings,respectively.Three target spectra with risk of 50%,10%and 2%probabilities for exceedance in 50 years were calculated by the average Newmark-Hall spectrum method for three ground motion sets developed in the SAC Steel Project.The predicted structural mean responses of these Newmark-Hall spectra were compared with those calculated by the average spectral acceleration method for the same record set.It is found that both methods have similar accuracy for estimating the structural mean response.However,the method proposed herein is more effective in reducing the variability of the structural responses.Also,the proposed method is more advantageous for the time-history analysis of long-period structures or structures with more severe nonlinear responses under strong seismic excitations.
文摘The practical design of the cable-stayed bridge of the 3rd Macao-Taipa bridge is investigated by the finite element analysis program ANSYS, and 3-D elements BEAM188 and BEAM4 are adopted to create a dynamic calculation model. In order to analyze the material nonlinear seismic response of the cable-stayed bridge, the nonlinear behaviors of the ductile plastic hinges of the bridge towers are taken into account by employing the nonlinear rotational spring element COMBIN40. To simulate a major earthquake, three earthquake records were chosen using a wave-choosing program and input into the bridge structure along longitudinal and transversal directions. Comparisons of the linear and nonlinear seismic responses of the cable-stayed bridge are performed. In addition, a study of TMD primary control is carried out using element MASS21 and element COMBIN14, and it is indicated that the effects of mitigation monitoring are evident.
文摘This paper focuses on the seismic performance of mountainous railway bridges having different pier type i.e. rectangular hollow piers and solid piers. The piers used were of same materials and inertial properties. For this, 3-D FEM models of these bridges were created by ANSYS 15.0. For seismic assessment, Response Spectrum and Dynamic Time-History Analysis methods were adopted. Different types of earthquake waves used were Elcentro, Wenchuan and Nepal earthquakes, all normalized to 0.3 g Peak Ground Acceleration (PGA). The study concluded that even though the hollow pier bridges are susceptible to large displacements, its dealing with internal forces is remarkable compared to solid pier bridges.
文摘The aim of this paper is to assess the accuracy of brace models formulated in Drain 2DX and OpenSees by comparing the simulated results with those obtained from experimental tests. Both, Drain 2DX and OpenSees rely on the physical theory brace model. In this study, experimental tests conducted on the behaviour of structural hollow section braces subjected to symmetric and asymmetric quasi-static cyclic loading were selected for calibrating the numerical model. In addition, the predicted failure strain parameter resulted from a proposed empirical equation as a function of slenderness ratio, width-to-thickness ratio and steel properties was used to define the low-cycle fatigue material that was assigned to model braces in OpenSees. It is concluded that both Drain 2DX and OpenSees brace models give a good prediction in terms of maximum tensile and buckling force, as well as interstorey drift. However, in Drain 2DX, the brace model is not able to replicate the out-of-plan buckling and the braced frame model cannot provide an accurate response when the system experiences highly nonlinear demand. To emphasise the differences in performance between Drain 2DX and OpenSees, the behaviour of a 4-storey concentrically braced frame with zipper bracing configuration, located in Victoria, BC, was investigated.
文摘It is helpful to improve the seismic design theory of long-span continuous bridges for studying the seismic performance of each cantilever construction state.Taking the Bridge 1 in the north of Changbai-Mountain international tourism resort as an example,the authors studied it in shutdown phase and the cantilever construction process,established the simulation model by using Midas / civil,and analyzed time-history of each construction stage for the bridge.The study shows that long-span bridge cantilever construction in northeastern China can be divided into two-year tasks for construction(suspending in winter).It is needed to think about seismic stability of the cantilever position in shut-down phase of winter.The effect of longitudinal vibration is the most disadvantageous influence to bridge,and its calculation results can provide reference for seismic design of similar bridges in the future.
文摘In Europe, computation of displacement demand for seismic assessment of existing buildings is essentially based on a simplified formulation of the N2 method as prescribed by Eurocode 8(EC8). However, a lack of accuracy of the N2 method in certain conditions has been pointed out by several studies. This paper addresses the assessment of effectiveness of the N2 method in seismic displacement demand determination in non-linear domain. The objective of this work is to investigate the accuracy of the N2 method through comparison with displacement demands computed using non-linear timehistory analysis(NLTHA). Results show that the original N2 method may lead to overestimation or underestimation of displacement demand predictions. This may affect results of mechanical model-based assessment of seismic vulnerability at an urban scale. Hence, the second part of this paper addresses an improvement of the N2 method formula by empirical evaluation of NLTHA results based on EC8 ground-classes. This task is formulated as a mathematical programming problem in which coefficients are obtained by minimizing the overall discrepancy between NLTHA and modified formula results. Various settings of the mathematical programming problem have been solved using a global optimization metaheuristic. An extensive comparison between the original N2 method formulation and optimized formulae highlights benefits of the strategy.
文摘This study presents earthquake performance analysis of the Torul Concrete-Faced Rockfill （CFR） Dam with two-dimensional dam-soil and dam-soil-reservoir finite element models. The Lagrangian approach was used with fluid elements to model impounded water. The interface elements were used to simulate the slippage between the concrete face slab and the rockfill. The horizontal component of the 1992 Erzincan earthquake, with a peak ground acceleration of 0.515g, was considered in time-history analysis. The Drucker-Prager model was preferred in nonlinear analysis of the concrete slab, rockfill and foundation soil. The maximum principal stresses and the maximum displacements in two opposite directions were compared by the height of the concrete slab according to linear time-history analysis to reveal the effect of reservoir water. The changes of critical displacements and principal stresses with time are also shown in this paper. According to linear and nonlinear time-history analysis, the effect of the reservoir water on the earthquake performance of the Torul CFR Dam was investigated and the possible damage situation was examined. The results show that the hydrodynamic pressure of reservoir water leads to an increase in the maximum displacements and principal stresses of the dam and reduces the earthquake performance of the dam. Although the linear time-history analysis demonstrates that the earthquake causes a momentous damage to the concrete slab of the Torul CFR Dam, the nonlinear time-history analysis shows that no evident damage occurs in either reservoir case.
基金Project (No. 2004Z3-E0351) supported by the Guangzhou Scientificand Technological Research Project, China
文摘Wind loading is a dominant factor for design of a cable-membrane structure. Three orthogonal turbulent components, including the longitudinal, lateral and vertical wind velocities, should be taken into account for the wind loads. In this study, a stochastic 3D coupling wind field model is derived by the spectral representation theory. The coherence functions of the three orthogonal turbulent components are considered in this model. Then the model is applied to generate the three correlated wind turbulent components. After that, formulae are proposed to transform the velocities into wind loads, and to introduce the modified wind pressure force. Finally, a wind-induced time-history response analysis is conducted for a 3D cable-membrane structure. Analytical results indicate that responses induced by the proposed wind load model are 10%-25% larger than those by the con- ventional uncorrelated model, and that the responses are not quite influenced by the modified wind pressure force. Therefore, we concluded that, in the time-history response analysis, the coherences of the three orthogonal turbulent components are necessary for a 3D cable-membrane structure, but the modified wind pressure force can be ignored.
