Inspired by the thermal stability mechanism of thermophilic protein,which presents ionic bonds that have better stability at higher temperatures,this paper proposes the introduction of electrostatic interactions by ad...Inspired by the thermal stability mechanism of thermophilic protein,which presents ionic bonds that have better stability at higher temperatures,this paper proposes the introduction of electrostatic interactions by adding carboxyl-modified silica(C-SiO2),PAA,and CaCl_(2) to achieve higher viscosity over 25℃.The rheological behavior of C-SiO_(2)-based shear thickening fluid(CS-STF)was investigated at a temperature range of 25–55℃.Unlike SiO_(2)-based STF,which exhibits single-step thickening and a negative correlation between viscosity and temperature.As the C-SiO_(2) content was 41%(w/w)and the mass ratio of PAA:CaCl_(2):C-SiO_(2) was 3:1:10,the CS-STF displayed a double-thickening behavior,and the peak viscosity reached 1330 Pa·s at 35℃.From the yarn pull-out test,the inter-yarn force was significantly increased with the increasing CS-STF content.Treating UHMWPE fabrics with CS-STF improved the impact resistance effectively.In the blunt impact test,the U-CS fabrics with high CS-STF content(121.45 wt%)experienced penetration failure under high impact energy(18 J)due to stress concentration caused by the shear thickening behavior.The knife stabbing test demonstrated that U-CS fabrics with appropriate content(88.38 wt%)have the best stabbing resistance in various impact energies.Overall,this study proposed a high-performence STF showing double-thickening and enhancing shear-thickening behavior at a wide temperature range,the composite fabrics with the performance of resisting both the blunt and stab impact had broad application prospects in the field of personal protection.展开更多
Objective:To investigate the predictive value of diaphragm thickening fraction(DTF)combined with cough peak expiratory flow(CPEF)on the success rate of weaning from mechanical ventilation.Methods:The clinical data of ...Objective:To investigate the predictive value of diaphragm thickening fraction(DTF)combined with cough peak expiratory flow(CPEF)on the success rate of weaning from mechanical ventilation.Methods:The clinical data of patients undergoing invasive mechanical ventilation via oral endotracheal intubation in the ICU of our hospital from January 2022 to December 2023 were studied.All patients underwent a 30-minute spontaneous breathing trial(SBT)using low-level pressure support ventilation(PSV)after meeting the clinical weaning screening criteria.Among them,150 patients who met the clinical weaning criteria were weaned from the ventilator.They were divided into a successful weaning group(n=100)and a failed weaning group(n=50)based on the weaning outcome.Clinical data,including age,gender,APACHE II score,duration of mechanical ventilation,DTF,and CPEF,were collected from 150 patients.The differences in clinical data between the two groups were compared,and the correlation between DTF,CPEF,and the success rate of weaning was analyzed.Results:There were no significant differences between the two groups in gender ratio(χ^(2)=0.884,P=0.347>0.05),age(t=0.350,P=0.727>0.05),and APACHE II score(t=1.295,P=0.197>0.05),but there was a significant difference in the duration of mechanical ventilation(t=3.766,P<0.001).The DTF and CPEF values in the successful weaning group were significantly higher than those in the failed weaning group(P<0.05).ROC curves were drawn to predict the weaning results using DTF,CPEF,and the combination of DTF and CPEF.The results showed that the specificity of the combination of DTF and CPEF was comparable to that of either metric alone,but the sensitivity and AUC were significantly higher than those of either metric alone.Conclusion:The combination of DTF and CPEF can be used as an effective indicator to evaluate the weaning efficacy of mechanically ventilated patients,which has important clinical significance for guiding clinical weaning treatment,improving the success rate of weaning,reducing the incidence of ventilator-associated pneumonia,and shortening the length of hospital stay.展开更多
As of 2023, endometrial cancer (EC) ranks second among malignant tumors of the female reproductive system in China, following cervical cancer, posing a significant burden on the country’s healthcare system. Postmenop...As of 2023, endometrial cancer (EC) ranks second among malignant tumors of the female reproductive system in China, following cervical cancer, posing a significant burden on the country’s healthcare system. Postmenopausal asymptomatic endometrial thickening is primarily benign, often involving endometrial polyps. However, previous clinical studies indicate a relatively high malignancy rate for postmenopausal endometrial polyps, suggesting the necessity for active intervention, particularly in cases with high-risk factors for EC. This article reviews the research progress on risk factors for endometrial lesions in postmenopausal patients with asymptomatic endometrial thickening, aiming to provide insights for clinical diagnosis and treatment.展开更多
Cotton is one of the most important economic crops in the world,and it is a major source of fiber in the textile industry.Strigolactones(SLs)are a class of carotenoid-derived plant hormones involved in many processes ...Cotton is one of the most important economic crops in the world,and it is a major source of fiber in the textile industry.Strigolactones(SLs)are a class of carotenoid-derived plant hormones involved in many processes of plant growth and development,although the functions of SL in fiber development remain largely unknown.Here,we found that the endogenous SLs were significantly higher in fibers at 20 days post-anthesis(DPA).Exogenous SLs significantly increased fiber length and cell wall thickness.Furthermore,we cloned three key SL biosynthetic genes,namely GhD27,GhMAX3,and GhMAX4,which were highly expressed in fibers,and subcellular localization analyses revealed that GhD27,GhMAX3,and GhMAX4 were localized in the chloroplast.The exogenous expression of GhD27,GhMAX3,and GhMAX4 complemented the physiological phenotypes of d27,max3,and max4 mutations in Arabidopsis,respectively.Knockdown of GhD27,GhMAX3,and GhMAX4 in cotton resulted in increased numbers of axillary buds and leaves,reduced fiber length,and significantly reduced fiber thickness.These findings revealed that SLs participate in plant growth,fiber elongation,and secondary cell wall formation in cotton.These results provide new and effective genetic resources for improving cotton fiber yield and plant architecture.展开更多
Electric vehicles(EVs)have garnered significant attention as a vital driver of economic growth and environmental sustainability.Nevertheless,ensuring the safety of high-energy batteries is now a top priority that cann...Electric vehicles(EVs)have garnered significant attention as a vital driver of economic growth and environmental sustainability.Nevertheless,ensuring the safety of high-energy batteries is now a top priority that cannot be overlooked during large-scale applications.This paper proposes an innovative active protection and cooling integrated battery module using smart materials,magneto-sensitive shear thickening fluid(MSTF),which is specifically designed to address safety threats posed by lithium-ion batteries(LIBs)exposed to harsh mechanical and environmental conditions.The theoretical framework introduces a novel approach for harnessing the smoothed-particle hydrodynamics(SPH)methodology that incorporates the intricate interplay of non-Newtonian fluid behavior,capturing the fluid-structure coupling inherent to the MSTF.This approach is further advanced by adopting an enhanced Herschel-Bulkley(H-B)model to encapsulate the intricate rheology of the MSTF under the influence of the magnetorheological effect(MRE)and shear thickening(ST)behavior.Numerical simulation results show that in the case of cooling,the MSTF is an effective cooling medium for rapidly reducing the temperature.In terms of mechanical abuse,the MSTF solidifies through actively applying the magnetic field during mechanical compression and impact within the battery module,resulting in 66%and 61.7%reductions in the maximum stress within the battery jellyroll,and 31.1%and 23%reductions in the reaction force,respectively.This mechanism effectively lowers the risk of short-circuit failure.The groundbreaking concepts unveiled in this paper for active protection battery modules are anticipated to be a valuable technological breakthrough in the areas of EV safety and lightweight/integrated design.展开更多
This work studied the thickening progression mechanism of the silica fume-oil well cement composite system at high temperatures(110-180.C)in order to provide a theoretical guidance for the rational application of sili...This work studied the thickening progression mechanism of the silica fume-oil well cement composite system at high temperatures(110-180.C)in order to provide a theoretical guidance for the rational application of silica fume in the cementing engineering.Results showed that silica fume seldom affected the thickening progression of oil well cement slurry at 110-120.C,but when temperature reached above130.C,it would aggravate the bulging degree of thickening curves and significantly extend the thickening time,meanwhile causing the abnormal“temperature-based thickening time reversal”and“dosage-based thickening time reversal”phenomena in the range of 130-160.C and 170-180.C respectively.At 130-160.C,the thickening time of oil well cement slurry was mainly associated with the generation rate of calcium hydroxide(CH)crystal.The introduced silica fume would be attracted to the cement minerals'surface that were hydrating to produce CH and agglomerate together to form an“adsorptive barrier”to hinder further hydration of the inner cement minerals.This“adsorptive barrier”effect strengthened with the rising temperature which extended the thickening time and caused the occurrence of the“temperature-based thickening time reversal”phenomenon.At 170-180.C,the pozzolanic activity of silica fume significantly enhanced and considerable amount of C-S-H was generated,thus the“temperature-based thickening time reversal”vanished and the“dosage-based thickening time reversal”was presented.展开更多
Shear thickening fluids （STFs） based on additives with different concentrations and molecular chain lengths were investigated. STF samples were prepared with silica and additive dispersed in polyethylene glycol （PE...Shear thickening fluids （STFs） based on additives with different concentrations and molecular chain lengths were investigated. STF samples were prepared with silica and additive dispersed in polyethylene glycol （PEG） 400, where three types of additives with different molecular chain lengths of PEG4000, PEG6000, and PEG10000 were used. For PEG10000, different concentrations, including 0, 1%, 3%, and 5%, were selected to study the influences of additive concentrations. Rheological properties of the samples were measured with a rheometer. The results show that the shear thickening effect was significantly enhanced with the increase of the concentration and the molecular chain length of additives. The mechanism of enhancement was quantitatively explained with the formation of large particles clusters.展开更多
Deep cone thickener (DCT) is the key equipment in cemented paste backfill (CPB), so it is essential to study the flocculation settling and thickening characteristics of the whole-tailings in DCT. Coupled with populati...Deep cone thickener (DCT) is the key equipment in cemented paste backfill (CPB), so it is essential to study the flocculation settling and thickening characteristics of the whole-tailings in DCT. Coupled with population balance model (PBM), computational fluid dynamics (CFD) was used to study the characteristics, namely particle size distribution (PSD) and underflow concentration in DCT. Based on actual production, the effects of rake rotational speed, feed rate and tailings slurry concentration were simulated and analyzed in a certain range. The PSD varied with rake rational speed, feed rate and tailings slurry concentration almost in the same trend, but the influence of feed rate was less than that of rake rational speed and tailings slurry concentration. The underflow concentration increased at first and then declined with rake rational speed and feed rate, but it rose and fell with the tailings slurry concentration. Finally, the optimal key parameters on the flocculation settling and thickening of the whole-tailings in DCT were obtained: rake rotational speed of 17 r/min, feed rate of 3.25 m^3/h and tailings slurry concentration of 20%, giving the reference values to the industrial production in Baishitamu Copper Mine.展开更多
The present experimental study investigates shock wave mitigation capability of potentially new personal protective equipment(PPE) suspension pads made from polyurea and shear thickening fluid(STF).The shock tube test...The present experimental study investigates shock wave mitigation capability of potentially new personal protective equipment(PPE) suspension pads made from polyurea and shear thickening fluid(STF).The shock tube test results show that when placed behind Twaron fabric systems with thickness ranging from 2 mm to 18 mm, the replacement of conventional flexible foam pad with STF and STF-infused foam pads with the same thickness of 20 mm greatly reduces the normalized peak pressure(by about 72% for each pad). However, this benefit is partially offset by a large increase in the normalized impulse(by about78% for the STF pad and 131% for the STF-infused foam pad) which may cause the shock wave mitigation performance of these two pads to become less effective. Interestingly, the use of 4 mm thick polyurea pad can greatly reduce the normalized peak pressure and impulse as well(by about 74% and 49%, respectively). These results reveal that among the potentially new suspension pads tested, the polyurea pad displays the best shock wave mitigation performance. Therefore, polyurea has potential for use as a suspension pad in personal protective equipment requiring shock wave mitigation capability such as fabric ballistic vests, bomb suits and combat helmets.展开更多
Water-locking flocs formed by ultrafine tailings particles will damage the thickener underflow concentration in the thickening process during paste preparation.The relationship between the mesostructure and seepage ch...Water-locking flocs formed by ultrafine tailings particles will damage the thickener underflow concentration in the thickening process during paste preparation.The relationship between the mesostructure and seepage characteristics of tail mortar is typically ignored when investigating the deep dehydration stage.A shearing seepage test of an unclassified tailing-sedimentation bed was performed with copper tailings,and the morphology and geometric distribution of micropores were analyzed via X-ray computed tomography.Moreover,the shearing evolution of the micropore structure and seepage channel was investigated to evaluate the dewatering performance of underflow slurry using a three-dimensional reconstruction approach.The results show that porosity decreases considerably under shearing.The connected-pore ratio and the average radius of the throat channel reach peak values of 0.79 and 31.38μm,respectively,when shearing is applied for 10 min.However,the reverse seepage velocity and absolute permeability in the bed decrease to various extents after shearing.Meanwhile,the maximum flow rate reaches 1.537μm/s and the absolute permeability increases by 14.16%.Shearing alters the formation process and the pore structure of the seepage channel.Isolated pores connect to the surrounding flocs to form branch channels,which then become the main seepage channel and create the dominant water-seepage flow channel.展开更多
Higher concentration is beneficial for the Paste and Thickened Tailings(PTT)operation in metal mine.Partial paste thickeners are produced lower density underflow.Flocculated tailings are intended to form a water entra...Higher concentration is beneficial for the Paste and Thickened Tailings(PTT)operation in metal mine.Partial paste thickeners are produced lower density underflow.Flocculated tailings are intended to form a water entrapped network structure in thickener,which is detrimental to underflow concentration.In this study,the continuous thickening experiment was carried out for ultra-fine tungsten tailings to study the influence of rake shearing on underflow.The micro pores structure and seepage flow in tailings bed before and after shearing are studied by CT and simulation approach to reveal the shearing enhancement mechanism of thickening process.The results shown that,the underflow concentration is increased from 61.4 wt%to 69.6 wt%by rake shearing in a pilot scale thickener,the porosity decreased from 46.48%to 37.46%.The entrapped water discharged from sticks structure more than sphere spaces.In items of seepage,after shearing,the seepage flow channel of tailings underflow is becoming longer,which caused the decreasing average flow rate decreases and absolute permeability.The absolute permeability is negatively correlated with tortuosity.The rake shearing can destroy the flocs structure;change the effective stress to increase the concentration.Higher underflow concentration improves the waste recycling and water recovery rate,especially for arid areas.展开更多
In this article,computational fluid dynamics(CFD)are used to explore the dynamics of water transport inside the pitted thickening of a plant xylem vessel.A pitted thickening model combined with the Bernoulli equation ...In this article,computational fluid dynamics(CFD)are used to explore the dynamics of water transport inside the pitted thickening of a plant xylem vessel.A pitted thickening model combined with the Bernoulli equation is used to analyze the influence of various factors(namely,the inner diameter,thickening width,thickening height,thickening spacing,number of laps and adjacent pit axial rotation).The pressure drop and the flow resistance coefficient are the variable parameters for our analysis.The results show that these two parameters are proportional to the thickening height and thickening width,and inversely proportional to the inner diameter,thickening spacing and number of laps.Three different wall thickening structures of the vessel are compared and the pitted thickening vessel is shown to provide the largest structural flow resistance,the annular thickening vessel has the second largest resistance and the helical thickening vessel corresponds to the smallest resistance of the three structures.展开更多
BACKGROUND： Early diagnosis of gallbladder cancer（GBC） can remarkably improve the prognosis of patients. This study aimed to develop a nomogram for individualized diagnosis of stage Ⅰ-Ⅱ GBC in chronic cholecystit...BACKGROUND： Early diagnosis of gallbladder cancer（GBC） can remarkably improve the prognosis of patients. This study aimed to develop a nomogram for individualized diagnosis of stage Ⅰ-Ⅱ GBC in chronic cholecystitis patients with gallbladder wall thickening.METHODS： The nomogram was developed using logistic regression analyses based on a retrospective cohort consisting of 89 consecutive patients with stage Ⅰ-Ⅱ GBC and 1240 patients with gallbladder wall thickening treated at one biliary surgery center in Shanghai between January 2009 and December 2011. The accuracy of the nomogram was validated by discrimination, calibration and a prospective cohort treated at another center between January 2012 and December 2014（n=928）.RESULTS： Factors included in the nomogram were advanced age, hazardous alcohol consumption, long-standing diagnosed gallstones, atrophic gallbladder, gallbladder wall calcification, intraluminal polypoid lesion, higher wall thickness ratio and mucosal line disruption. The nomogram had concordance indices of 0.889 and 0.856 for the two cohorts, respectively. Internal and external calibration curves fitted well. The area under the receiver-operating characteristic curves of the nomogram was higher than that of multidetector row computed tomography in diagnosis of stage Ⅰ-Ⅱ GBC（P〈0.001）.CONCLUSION： The proposed nomogram improves individualized diagnosis of stage Ⅰ-Ⅱ GBC in chronic cholecystitis patients with gallbladder wall thickening, especially for those the imaging features alone do not allow to confirm the diagnosis.展开更多
Based on the special physical–chemical characteristics of optical crystal in the field of aeronautics,a new anhydrous based shear-thickening polishing(ASTP)method has been proposed to restrain deliquescence and to im...Based on the special physical–chemical characteristics of optical crystal in the field of aeronautics,a new anhydrous based shear-thickening polishing(ASTP)method has been proposed to restrain deliquescence and to improve physical properties for KDP machining.The ultraprecision polishing of KDP crystal is completed by ASTP.A kind of anhydrous based thickening polishing slurry(ATPS)was proposed in our work,and high-performance rheological properties were determined to achieve the ASTP of KDP crystal.A material removal model of ASTP in KDP machining is established,followed by the verification experiment of the prediction model.The maximum error of the predictive model is only 9.8%,which proves the validity of the material removal model for KDP polishing.The polishing experiments were carried out on the polishing platform developed by ourselves.The results show that the new polishing method can polish20 mm×20 mm×5 mm KDP crystal and obtain a super-smooth surface with a surface roughness of 1.37 nm and high shape accuracy.The surface accuracy of polished KDP crystal reaches up to0.68 k(RMS).The experimental results show that the ASTP is a potential ultra-precision machining method for KDP crystal.展开更多
AKinetic modelofthickening of TiNparticlesin heat- affected - zone( HAZ) of low car bonsteelhasbeen proposedinthispaper.Itisalsofoundthatthesolutionofsome TiNparti clesisrapid, andthethickening of TiNparticlesis mai...AKinetic modelofthickening of TiNparticlesin heat- affected - zone( HAZ) of low car bonsteelhasbeen proposedinthispaper.Itisalsofoundthatthesolutionofsome TiNparti clesisrapid, andthethickening of TiNparticlesis mainlycontrolled by diffusion of Tiatomforwardinterfaceofinsoluble TiNparticles.展开更多
The present study aims at assessing the ballistic impact behaviour of jute reinforced polyethylene glycol(PEG)and nano silica based shear thickening fluid(STF).Preparation of STF is achieved by dispersing the nano sil...The present study aims at assessing the ballistic impact behaviour of jute reinforced polyethylene glycol(PEG)and nano silica based shear thickening fluid(STF).Preparation of STF is achieved by dispersing the nano silica particles at different weight percentage loadings of 10%,20%,30%and 40%in PEG and the effect of various weight percentages loading of nano silica particles on ballistic performance of the proposed composites is studied experimentally.Rheological studies of the prepared STF’s showed that at all nanosilica loading shear thickening occurred and also the shear thickening was highest at higher loading of nano silica at lower rate of shear.The study reveals that the ballistic performance of the jute fabric is enhanced with impregnation of STF.The ballistic results indicate that energy absorption of the proposed composites is enhanced with increased loading of nano silica particles and at the same time,the effect of STF was reduced.Specific energy absorption(SEA)of the neat fabric and the proposed composites was made use of for the purpose of comparing the energy absorption capabilities.It is found that the SEA of proposed composites with 10%nano silica loading is lesser than the neat fabric both in case of 3 layers and 6 layers.It was also found that proposed composite with 40%nano silica loading exhibits highest SEA compared to neat fabric and its counterparts with its SEA being 3.21 and 3.76 times highest compared to three and six layers of neat fabrics respectively.展开更多
This paper uses deep seismic sounding （DSS） data to contrast and analyze the crustal structures of three plateau basins （Songpan-Garze, Qaidam, Longzhong） in the northeastern margin of the Qinghai-Xizang （Tibetan...This paper uses deep seismic sounding （DSS） data to contrast and analyze the crustal structures of three plateau basins （Songpan-Garze, Qaidam, Longzhong） in the northeastern margin of the Qinghai-Xizang （Tibetan） plateau, as well as two stable cratonic basins （Ordos, Sichuan） in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust （about 5 10 km）, and rheological characteristics that show low- medium velocity （relatively reduced by 7%）, suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.展开更多
Upland cotton （Gossypium hirsutum L.） is an allotetraploid species originated from interspecific hybridization between AA-genome diploid （G. arboretum） and DD-genome diploid （G. raimondii） （Wendel et al., 1992...Upland cotton （Gossypium hirsutum L.） is an allotetraploid species originated from interspecific hybridization between AA-genome diploid （G. arboretum） and DD-genome diploid （G. raimondii） （Wendel et al., 1992）. Cotton fibers are single-celled trichomes that emerge from the ovule epidermal cells. Indexed by the number of days post-anthesis （dpa）, fiber morphogenesis includes four distinct but overlapping steps： initiation （0-3 dpa）, elongation （3-20 dpa）, secondary cell wall thickening （15-45 dpa） and maturation （40-60 dpa） （Yang et al., 2008, Du et al., 2013）. The efficiency and duration of each morphogenesis stage is important to the quality attributes of the mature fiber. Cell elongation is critical for fiber length, whereas secondary cell wall thickening is important for fiber fineness and strength （Meinert and Delmer, 1977）.展开更多
Dear Editor,I am Dr. Hamid Sajjadi, director of Neuro-Ophthalmology at San Jose Eye and Laser Medical Center in California USA and director of Department of Ophthalmology, Acacia Medical Center, Dubai, UAE. I write to...Dear Editor,I am Dr. Hamid Sajjadi, director of Neuro-Ophthalmology at San Jose Eye and Laser Medical Center in California USA and director of Department of Ophthalmology, Acacia Medical Center, Dubai, UAE. I write to present three cases of macular thickening (MT) and micro-papilledema associated with increased intracranial pressure (IICP).展开更多
A kind of PEG-MAH（maleic anhydride to modify polyethylene glycol） crystalline polymer whose melting point was approximately 64 ℃ was synthesized, and its thickening traits to LPMC were also investigated. The analys...A kind of PEG-MAH（maleic anhydride to modify polyethylene glycol） crystalline polymer whose melting point was approximately 64 ℃ was synthesized, and its thickening traits to LPMC were also investigated. The analysis of rheological properties indicates that the dosage and adding methods of crystalline polymer have a direct effect on the viscosity of LPMC, and that the thickening method of using melting dispersal and freezing is propitious to the thickening process of SMC. Additionally, it is also shown that SMC＇ s viscosity decreases along with the elevation of temperature, and that it reduces rapidly at the medium range of temperature, which is propitious to the dispersal of SMC in mould, and to its low pressure molding as well.展开更多
基金the Major Science and Technology Demonstration Projects in Jiangsu Province(Grant No.BE2022608).
文摘Inspired by the thermal stability mechanism of thermophilic protein,which presents ionic bonds that have better stability at higher temperatures,this paper proposes the introduction of electrostatic interactions by adding carboxyl-modified silica(C-SiO2),PAA,and CaCl_(2) to achieve higher viscosity over 25℃.The rheological behavior of C-SiO_(2)-based shear thickening fluid(CS-STF)was investigated at a temperature range of 25–55℃.Unlike SiO_(2)-based STF,which exhibits single-step thickening and a negative correlation between viscosity and temperature.As the C-SiO_(2) content was 41%(w/w)and the mass ratio of PAA:CaCl_(2):C-SiO_(2) was 3:1:10,the CS-STF displayed a double-thickening behavior,and the peak viscosity reached 1330 Pa·s at 35℃.From the yarn pull-out test,the inter-yarn force was significantly increased with the increasing CS-STF content.Treating UHMWPE fabrics with CS-STF improved the impact resistance effectively.In the blunt impact test,the U-CS fabrics with high CS-STF content(121.45 wt%)experienced penetration failure under high impact energy(18 J)due to stress concentration caused by the shear thickening behavior.The knife stabbing test demonstrated that U-CS fabrics with appropriate content(88.38 wt%)have the best stabbing resistance in various impact energies.Overall,this study proposed a high-performence STF showing double-thickening and enhancing shear-thickening behavior at a wide temperature range,the composite fabrics with the performance of resisting both the blunt and stab impact had broad application prospects in the field of personal protection.
文摘Objective:To investigate the predictive value of diaphragm thickening fraction(DTF)combined with cough peak expiratory flow(CPEF)on the success rate of weaning from mechanical ventilation.Methods:The clinical data of patients undergoing invasive mechanical ventilation via oral endotracheal intubation in the ICU of our hospital from January 2022 to December 2023 were studied.All patients underwent a 30-minute spontaneous breathing trial(SBT)using low-level pressure support ventilation(PSV)after meeting the clinical weaning screening criteria.Among them,150 patients who met the clinical weaning criteria were weaned from the ventilator.They were divided into a successful weaning group(n=100)and a failed weaning group(n=50)based on the weaning outcome.Clinical data,including age,gender,APACHE II score,duration of mechanical ventilation,DTF,and CPEF,were collected from 150 patients.The differences in clinical data between the two groups were compared,and the correlation between DTF,CPEF,and the success rate of weaning was analyzed.Results:There were no significant differences between the two groups in gender ratio(χ^(2)=0.884,P=0.347>0.05),age(t=0.350,P=0.727>0.05),and APACHE II score(t=1.295,P=0.197>0.05),but there was a significant difference in the duration of mechanical ventilation(t=3.766,P<0.001).The DTF and CPEF values in the successful weaning group were significantly higher than those in the failed weaning group(P<0.05).ROC curves were drawn to predict the weaning results using DTF,CPEF,and the combination of DTF and CPEF.The results showed that the specificity of the combination of DTF and CPEF was comparable to that of either metric alone,but the sensitivity and AUC were significantly higher than those of either metric alone.Conclusion:The combination of DTF and CPEF can be used as an effective indicator to evaluate the weaning efficacy of mechanically ventilated patients,which has important clinical significance for guiding clinical weaning treatment,improving the success rate of weaning,reducing the incidence of ventilator-associated pneumonia,and shortening the length of hospital stay.
文摘As of 2023, endometrial cancer (EC) ranks second among malignant tumors of the female reproductive system in China, following cervical cancer, posing a significant burden on the country’s healthcare system. Postmenopausal asymptomatic endometrial thickening is primarily benign, often involving endometrial polyps. However, previous clinical studies indicate a relatively high malignancy rate for postmenopausal endometrial polyps, suggesting the necessity for active intervention, particularly in cases with high-risk factors for EC. This article reviews the research progress on risk factors for endometrial lesions in postmenopausal patients with asymptomatic endometrial thickening, aiming to provide insights for clinical diagnosis and treatment.
基金supported by the National Natural Science Foundation of China (32170367 and 32000146)the Fundamental Research Funds for the Central Universities, China (2021TS066 and GK202103063)the Excellent Graduate Training Program of Shaanxi Normal University, China (LHRCCX23181).
文摘Cotton is one of the most important economic crops in the world,and it is a major source of fiber in the textile industry.Strigolactones(SLs)are a class of carotenoid-derived plant hormones involved in many processes of plant growth and development,although the functions of SL in fiber development remain largely unknown.Here,we found that the endogenous SLs were significantly higher in fibers at 20 days post-anthesis(DPA).Exogenous SLs significantly increased fiber length and cell wall thickness.Furthermore,we cloned three key SL biosynthetic genes,namely GhD27,GhMAX3,and GhMAX4,which were highly expressed in fibers,and subcellular localization analyses revealed that GhD27,GhMAX3,and GhMAX4 were localized in the chloroplast.The exogenous expression of GhD27,GhMAX3,and GhMAX4 complemented the physiological phenotypes of d27,max3,and max4 mutations in Arabidopsis,respectively.Knockdown of GhD27,GhMAX3,and GhMAX4 in cotton resulted in increased numbers of axillary buds and leaves,reduced fiber length,and significantly reduced fiber thickness.These findings revealed that SLs participate in plant growth,fiber elongation,and secondary cell wall formation in cotton.These results provide new and effective genetic resources for improving cotton fiber yield and plant architecture.
基金Project supported by the National Natural Science Foundation of China(Nos.12072183 and11872236)the Key Research Project of Zhejiang Laboratory(No.2021PE0AC02)。
文摘Electric vehicles(EVs)have garnered significant attention as a vital driver of economic growth and environmental sustainability.Nevertheless,ensuring the safety of high-energy batteries is now a top priority that cannot be overlooked during large-scale applications.This paper proposes an innovative active protection and cooling integrated battery module using smart materials,magneto-sensitive shear thickening fluid(MSTF),which is specifically designed to address safety threats posed by lithium-ion batteries(LIBs)exposed to harsh mechanical and environmental conditions.The theoretical framework introduces a novel approach for harnessing the smoothed-particle hydrodynamics(SPH)methodology that incorporates the intricate interplay of non-Newtonian fluid behavior,capturing the fluid-structure coupling inherent to the MSTF.This approach is further advanced by adopting an enhanced Herschel-Bulkley(H-B)model to encapsulate the intricate rheology of the MSTF under the influence of the magnetorheological effect(MRE)and shear thickening(ST)behavior.Numerical simulation results show that in the case of cooling,the MSTF is an effective cooling medium for rapidly reducing the temperature.In terms of mechanical abuse,the MSTF solidifies through actively applying the magnetic field during mechanical compression and impact within the battery module,resulting in 66%and 61.7%reductions in the maximum stress within the battery jellyroll,and 31.1%and 23%reductions in the reaction force,respectively.This mechanism effectively lowers the risk of short-circuit failure.The groundbreaking concepts unveiled in this paper for active protection battery modules are anticipated to be a valuable technological breakthrough in the areas of EV safety and lightweight/integrated design.
基金supported by the Basic Research and Strategic Reserve Technology Research Fund Project of China National Petroleum Corporation (Grant No.2021DQ03-14)the National Natu ral Science Foundation of China (Grant No.52204010)Haihe Laboratory of Sustainable Chemical Transformations for financial support。
文摘This work studied the thickening progression mechanism of the silica fume-oil well cement composite system at high temperatures(110-180.C)in order to provide a theoretical guidance for the rational application of silica fume in the cementing engineering.Results showed that silica fume seldom affected the thickening progression of oil well cement slurry at 110-120.C,but when temperature reached above130.C,it would aggravate the bulging degree of thickening curves and significantly extend the thickening time,meanwhile causing the abnormal“temperature-based thickening time reversal”and“dosage-based thickening time reversal”phenomena in the range of 130-160.C and 170-180.C respectively.At 130-160.C,the thickening time of oil well cement slurry was mainly associated with the generation rate of calcium hydroxide(CH)crystal.The introduced silica fume would be attracted to the cement minerals'surface that were hydrating to produce CH and agglomerate together to form an“adsorptive barrier”to hinder further hydration of the inner cement minerals.This“adsorptive barrier”effect strengthened with the rising temperature which extended the thickening time and caused the occurrence of the“temperature-based thickening time reversal”phenomenon.At 170-180.C,the pozzolanic activity of silica fume significantly enhanced and considerable amount of C-S-H was generated,thus the“temperature-based thickening time reversal”vanished and the“dosage-based thickening time reversal”was presented.
文摘Shear thickening fluids （STFs） based on additives with different concentrations and molecular chain lengths were investigated. STF samples were prepared with silica and additive dispersed in polyethylene glycol （PEG） 400, where three types of additives with different molecular chain lengths of PEG4000, PEG6000, and PEG10000 were used. For PEG10000, different concentrations, including 0, 1%, 3%, and 5%, were selected to study the influences of additive concentrations. Rheological properties of the samples were measured with a rheometer. The results show that the shear thickening effect was significantly enhanced with the increase of the concentration and the molecular chain length of additives. The mechanism of enhancement was quantitatively explained with the formation of large particles clusters.
基金Project(2016YFC0600709)supported by the National Key R&D Program of ChinaProjects(51574013,51774039)supported by the National Natural Science Foundation of ChinaProject(FRF-TP-17-024A1)supported by the Fundamental Research Funds for the Central Universities,China
文摘Deep cone thickener (DCT) is the key equipment in cemented paste backfill (CPB), so it is essential to study the flocculation settling and thickening characteristics of the whole-tailings in DCT. Coupled with population balance model (PBM), computational fluid dynamics (CFD) was used to study the characteristics, namely particle size distribution (PSD) and underflow concentration in DCT. Based on actual production, the effects of rake rotational speed, feed rate and tailings slurry concentration were simulated and analyzed in a certain range. The PSD varied with rake rational speed, feed rate and tailings slurry concentration almost in the same trend, but the influence of feed rate was less than that of rake rational speed and tailings slurry concentration. The underflow concentration increased at first and then declined with rake rational speed and feed rate, but it rose and fell with the tailings slurry concentration. Finally, the optimal key parameters on the flocculation settling and thickening of the whole-tailings in DCT were obtained: rake rotational speed of 17 r/min, feed rate of 3.25 m^3/h and tailings slurry concentration of 20%, giving the reference values to the industrial production in Baishitamu Copper Mine.
基金supported by the Ministry of Education,Singapore(R265000533112)
文摘The present experimental study investigates shock wave mitigation capability of potentially new personal protective equipment(PPE) suspension pads made from polyurea and shear thickening fluid(STF).The shock tube test results show that when placed behind Twaron fabric systems with thickness ranging from 2 mm to 18 mm, the replacement of conventional flexible foam pad with STF and STF-infused foam pads with the same thickness of 20 mm greatly reduces the normalized peak pressure(by about 72% for each pad). However, this benefit is partially offset by a large increase in the normalized impulse(by about78% for the STF pad and 131% for the STF-infused foam pad) which may cause the shock wave mitigation performance of these two pads to become less effective. Interestingly, the use of 4 mm thick polyurea pad can greatly reduce the normalized peak pressure and impulse as well(by about 74% and 49%, respectively). These results reveal that among the potentially new suspension pads tested, the polyurea pad displays the best shock wave mitigation performance. Therefore, polyurea has potential for use as a suspension pad in personal protective equipment requiring shock wave mitigation capability such as fabric ballistic vests, bomb suits and combat helmets.
基金supported by the National Natural Science Foundation of China (No.51834001)。
文摘Water-locking flocs formed by ultrafine tailings particles will damage the thickener underflow concentration in the thickening process during paste preparation.The relationship between the mesostructure and seepage characteristics of tail mortar is typically ignored when investigating the deep dehydration stage.A shearing seepage test of an unclassified tailing-sedimentation bed was performed with copper tailings,and the morphology and geometric distribution of micropores were analyzed via X-ray computed tomography.Moreover,the shearing evolution of the micropore structure and seepage channel was investigated to evaluate the dewatering performance of underflow slurry using a three-dimensional reconstruction approach.The results show that porosity decreases considerably under shearing.The connected-pore ratio and the average radius of the throat channel reach peak values of 0.79 and 31.38μm,respectively,when shearing is applied for 10 min.However,the reverse seepage velocity and absolute permeability in the bed decrease to various extents after shearing.Meanwhile,the maximum flow rate reaches 1.537μm/s and the absolute permeability increases by 14.16%.Shearing alters the formation process and the pore structure of the seepage channel.Isolated pores connect to the surrounding flocs to form branch channels,which then become the main seepage channel and create the dominant water-seepage flow channel.
基金This work was supported by funding from the National Natural Science Foundation of China Projects(51834001,51704094,U170420041)the China Postdoctoral Science Foundation(2020M672226)+2 种基金Program for Science&Technology Innovation Talents in Universities of Henan Province(19HASTIT047)Key Science Research Project in Universities of Henan Province(19B620001,20A620004)Henan Polytechnic University Science Fund for Distinguished Young Scholars(J2020-3).
文摘Higher concentration is beneficial for the Paste and Thickened Tailings(PTT)operation in metal mine.Partial paste thickeners are produced lower density underflow.Flocculated tailings are intended to form a water entrapped network structure in thickener,which is detrimental to underflow concentration.In this study,the continuous thickening experiment was carried out for ultra-fine tungsten tailings to study the influence of rake shearing on underflow.The micro pores structure and seepage flow in tailings bed before and after shearing are studied by CT and simulation approach to reveal the shearing enhancement mechanism of thickening process.The results shown that,the underflow concentration is increased from 61.4 wt%to 69.6 wt%by rake shearing in a pilot scale thickener,the porosity decreased from 46.48%to 37.46%.The entrapped water discharged from sticks structure more than sphere spaces.In items of seepage,after shearing,the seepage flow channel of tailings underflow is becoming longer,which caused the decreasing average flow rate decreases and absolute permeability.The absolute permeability is negatively correlated with tortuosity.The rake shearing can destroy the flocs structure;change the effective stress to increase the concentration.Higher underflow concentration improves the waste recycling and water recovery rate,especially for arid areas.
基金supported by the National Natural Science Foundation of China(Grant Nos.51279071,51969009)the Foundation of the Ministry of Education of China for Ph.D candidates in University(Grant No.2013531413002).
文摘In this article,computational fluid dynamics(CFD)are used to explore the dynamics of water transport inside the pitted thickening of a plant xylem vessel.A pitted thickening model combined with the Bernoulli equation is used to analyze the influence of various factors(namely,the inner diameter,thickening width,thickening height,thickening spacing,number of laps and adjacent pit axial rotation).The pressure drop and the flow resistance coefficient are the variable parameters for our analysis.The results show that these two parameters are proportional to the thickening height and thickening width,and inversely proportional to the inner diameter,thickening spacing and number of laps.Three different wall thickening structures of the vessel are compared and the pitted thickening vessel is shown to provide the largest structural flow resistance,the annular thickening vessel has the second largest resistance and the helical thickening vessel corresponds to the smallest resistance of the three structures.
基金supported by grants from the National Natural Science Foundation of China(81401932,81272747 and 81372642)
文摘BACKGROUND： Early diagnosis of gallbladder cancer（GBC） can remarkably improve the prognosis of patients. This study aimed to develop a nomogram for individualized diagnosis of stage Ⅰ-Ⅱ GBC in chronic cholecystitis patients with gallbladder wall thickening.METHODS： The nomogram was developed using logistic regression analyses based on a retrospective cohort consisting of 89 consecutive patients with stage Ⅰ-Ⅱ GBC and 1240 patients with gallbladder wall thickening treated at one biliary surgery center in Shanghai between January 2009 and December 2011. The accuracy of the nomogram was validated by discrimination, calibration and a prospective cohort treated at another center between January 2012 and December 2014（n=928）.RESULTS： Factors included in the nomogram were advanced age, hazardous alcohol consumption, long-standing diagnosed gallstones, atrophic gallbladder, gallbladder wall calcification, intraluminal polypoid lesion, higher wall thickness ratio and mucosal line disruption. The nomogram had concordance indices of 0.889 and 0.856 for the two cohorts, respectively. Internal and external calibration curves fitted well. The area under the receiver-operating characteristic curves of the nomogram was higher than that of multidetector row computed tomography in diagnosis of stage Ⅰ-Ⅱ GBC（P〈0.001）.CONCLUSION： The proposed nomogram improves individualized diagnosis of stage Ⅰ-Ⅱ GBC in chronic cholecystitis patients with gallbladder wall thickening, especially for those the imaging features alone do not allow to confirm the diagnosis.
基金the National Natural Science Foundation of China(No.51605163)Alexander von Humboldt Foundation of Germany(2019)+1 种基金Hunan Provincial Key R&D Project(No.GK2050)Zhejiang Provincial Natural Science Foundation(No.LR17E050002)。
文摘Based on the special physical–chemical characteristics of optical crystal in the field of aeronautics,a new anhydrous based shear-thickening polishing(ASTP)method has been proposed to restrain deliquescence and to improve physical properties for KDP machining.The ultraprecision polishing of KDP crystal is completed by ASTP.A kind of anhydrous based thickening polishing slurry(ATPS)was proposed in our work,and high-performance rheological properties were determined to achieve the ASTP of KDP crystal.A material removal model of ASTP in KDP machining is established,followed by the verification experiment of the prediction model.The maximum error of the predictive model is only 9.8%,which proves the validity of the material removal model for KDP polishing.The polishing experiments were carried out on the polishing platform developed by ourselves.The results show that the new polishing method can polish20 mm×20 mm×5 mm KDP crystal and obtain a super-smooth surface with a surface roughness of 1.37 nm and high shape accuracy.The surface accuracy of polished KDP crystal reaches up to0.68 k(RMS).The experimental results show that the ASTP is a potential ultra-precision machining method for KDP crystal.
文摘AKinetic modelofthickening of TiNparticlesin heat- affected - zone( HAZ) of low car bonsteelhasbeen proposedinthispaper.Itisalsofoundthatthesolutionofsome TiNparti clesisrapid, andthethickening of TiNparticlesis mainlycontrolled by diffusion of Tiatomforwardinterfaceofinsoluble TiNparticles.
文摘The present study aims at assessing the ballistic impact behaviour of jute reinforced polyethylene glycol(PEG)and nano silica based shear thickening fluid(STF).Preparation of STF is achieved by dispersing the nano silica particles at different weight percentage loadings of 10%,20%,30%and 40%in PEG and the effect of various weight percentages loading of nano silica particles on ballistic performance of the proposed composites is studied experimentally.Rheological studies of the prepared STF’s showed that at all nanosilica loading shear thickening occurred and also the shear thickening was highest at higher loading of nano silica at lower rate of shear.The study reveals that the ballistic performance of the jute fabric is enhanced with impregnation of STF.The ballistic results indicate that energy absorption of the proposed composites is enhanced with increased loading of nano silica particles and at the same time,the effect of STF was reduced.Specific energy absorption(SEA)of the neat fabric and the proposed composites was made use of for the purpose of comparing the energy absorption capabilities.It is found that the SEA of proposed composites with 10%nano silica loading is lesser than the neat fabric both in case of 3 layers and 6 layers.It was also found that proposed composite with 40%nano silica loading exhibits highest SEA compared to neat fabric and its counterparts with its SEA being 3.21 and 3.76 times highest compared to three and six layers of neat fabrics respectively.
基金supported by the project Active Fault Survey in Chinese mainl and-DSS profile in the central Longmen-shan from CEA (2010)National Natural Science Foundation of China (No. 40974033)
文摘This paper uses deep seismic sounding （DSS） data to contrast and analyze the crustal structures of three plateau basins （Songpan-Garze, Qaidam, Longzhong） in the northeastern margin of the Qinghai-Xizang （Tibetan） plateau, as well as two stable cratonic basins （Ordos, Sichuan） in its peripheral areas. Plateau basin crustal structures, lithological variations and crustal thickening mechanisms were investigated. The results show that, compared to the peripheral stable cratonic basins, the crystalline crusts of plateau basins in the northeastern margin are up to 10 15 km thicker, and the relative medium velocity difference is about 5% less. The medium velocity change in crustal layers of plateau basin indicates that the upper crust undergoes brittle deformation, whereas the lower crust deforms plastically with low velocity. The middle crust shows a brittle-to-plastic transition zone in this region. Thickening in the lower crust （about 5 10 km）, and rheological characteristics that show low- medium velocity （relatively reduced by 7%）, suggest that crustal thickening mainly takes place in lower crust in the northeastern margin of the Tibetan plateau. The crust along the northeastern margin shows evidence of wholesale block movement, and crustal shortening and thickening seem to be the main deformation features of this region. The GPS data show that the block motion modes and crustal thickening in the Tibetan plateau is closely related to the peripheral tectonic stress field and motion direction of the Indian plate. The Mani-Yushu- Xianshuihe fold belt along the boundary between the Qiangtang block and the Bayan Har block divides the different plateau thickening tectonic environments into the middle-western plateau, the northeastern margin and the southeastern plateau.
基金supported by the grants from the State Key Basic Research and Development Plan (No. 2010CB126003)the National Transgenic Animals and Plants Research Project (Nos. 2011ZX08005-003 and 2011ZX08009-003)
文摘Upland cotton （Gossypium hirsutum L.） is an allotetraploid species originated from interspecific hybridization between AA-genome diploid （G. arboretum） and DD-genome diploid （G. raimondii） （Wendel et al., 1992）. Cotton fibers are single-celled trichomes that emerge from the ovule epidermal cells. Indexed by the number of days post-anthesis （dpa）, fiber morphogenesis includes four distinct but overlapping steps： initiation （0-3 dpa）, elongation （3-20 dpa）, secondary cell wall thickening （15-45 dpa） and maturation （40-60 dpa） （Yang et al., 2008, Du et al., 2013）. The efficiency and duration of each morphogenesis stage is important to the quality attributes of the mature fiber. Cell elongation is critical for fiber length, whereas secondary cell wall thickening is important for fiber fineness and strength （Meinert and Delmer, 1977）.
文摘Dear Editor,I am Dr. Hamid Sajjadi, director of Neuro-Ophthalmology at San Jose Eye and Laser Medical Center in California USA and director of Department of Ophthalmology, Acacia Medical Center, Dubai, UAE. I write to present three cases of macular thickening (MT) and micro-papilledema associated with increased intracranial pressure (IICP).
基金Funded by the National Natural Science Foundation of China(No.50473013)
文摘A kind of PEG-MAH（maleic anhydride to modify polyethylene glycol） crystalline polymer whose melting point was approximately 64 ℃ was synthesized, and its thickening traits to LPMC were also investigated. The analysis of rheological properties indicates that the dosage and adding methods of crystalline polymer have a direct effect on the viscosity of LPMC, and that the thickening method of using melting dispersal and freezing is propitious to the thickening process of SMC. Additionally, it is also shown that SMC＇ s viscosity decreases along with the elevation of temperature, and that it reduces rapidly at the medium range of temperature, which is propitious to the dispersal of SMC in mould, and to its low pressure molding as well.
