The thermotropic liquid crystal polyester(TLCP)fiber is an increasingly important strategic high-performance fiber.In this paper,the TLCP was prepared by two-step melt polymerization using 4-hydroxybenzoic acid(HBA)an...The thermotropic liquid crystal polyester(TLCP)fiber is an increasingly important strategic high-performance fiber.In this paper,the TLCP was prepared by two-step melt polymerization using 4-hydroxybenzoic acid(HBA)and 6-hydroxy-2-naphthoic acid(HNA)as comonomers at a molar ratio of 7∶3.The structure of TLCP was confirmed by the Fourier transform infrared(FTIR)spectrometer and nuclear magnetic resonance(NMR)spectrometer.The thermal and rheological properties of TLCP before and after heat treatment were analyzed systematically by the differential scanning calorimeter(DSC),dynamic mechanical analyzer(DMA)and high-temperature rotational rheometer.The results revealed that the melting temperature,glass transition temperature and melt viscosity of the TLCP increased significantly after heat treatment.It indicates that the crystallization of the TLCP is perfect,and solid-phase condensation occurs during heat treatment,which increases its molecular mass.In conclusion,heat treatment at a temperature below but close to the melting temperature can effectively regulate the structure and properties of the TLCP,and the results of this study can provide a reference for the high strengthening of TLCP fibers.展开更多
A new homologous series of thermotropic liquid crystalline copoly(arylidene-ether)s based on 4-teriary butyl cyclohexanone moiety were synthesized by solution polycondensation of 4,4’-diformyl-α,ω-diphenoxyalkanes,...A new homologous series of thermotropic liquid crystalline copoly(arylidene-ether)s based on 4-teriary butyl cyclohexanone moiety were synthesized by solution polycondensation of 4,4’-diformyl-α,ω-diphenoxyalkanes, Ia-d or 4,4’- diformyl-2,2’-dimethoxy-α,ω-diphenoxyalkanes IIa-d with the 4-teriary butyl-cyclohexanone III and cyclopentanone. A model compound IV was synthesized from the monomer III with benzaldehyde and characterized by elemental and spectral analyses. The inherent viscosities of the resulting polymers were in the range 0.22 - 0.92 dI/g. All the copoly(arylidene-ether)s were insoluble in common organic solvents but dissolved completely in concentrated H2SO4 and formic acid. The mesomorphic properties of these polymers were studied as a function of the diphenoxyalkane space length. Their thermotropic liquid crystalline properties were examined by DSC and optical polarizing microscopy and demonstrated that the resulting polymers form nematic mesophases over wide temperature ranges. The thermogravimetric analyses of those polymers were evaluated by TGA and DSC measurements and correlated to their structural units. X-Ray analysis showed that copolymers having some degree of crystallinity in the region 2q = 5° -60°. In addition, the morphological properties of selected examples were tested by Scanning electron microscopy.展开更多
Adopting Poly（ethylene glycol） adipate Dilpoly- （ethylene glycol）] adipate polydiglycol adipate glycol （PDAG）, 1,4-butanediol （BDO）, hydroxy silicone oil, methylene diphenyl diisocyanate （MDI） as the raw mat...Adopting Poly（ethylene glycol） adipate Dilpoly- （ethylene glycol）] adipate polydiglycol adipate glycol （PDAG）, 1,4-butanediol （BDO）, hydroxy silicone oil, methylene diphenyl diisocyanate （MDI） as the raw material, a new polyurethane elastic body can be made through prepolymerization. After measurement of the moisture permeability, adsorption quantity and mechanical properties of the membrane made with the elastic body, we also proofed its formula by infrared spectroscopy. The result showed that the moisture permeability of the membrane, with a certain intelligent thermotropic quality, will increase by 3 to 4 times when the temperature is between 25℃-45℃.展开更多
Dynamic viscoelastic properties of polyacrylonitrile(PAN)/DMSO/H2O solutions with different H2O contents were studied as a function of temperature.These PAN solutions gradually became gel with decreasing temperature.T...Dynamic viscoelastic properties of polyacrylonitrile(PAN)/DMSO/H2O solutions with different H2O contents were studied as a function of temperature.These PAN solutions gradually became gel with decreasing temperature.The sol-gel transition took place at a critical gel temperature,at which the scaling law of G'(ω)～G″(ω)∝ωn held,allowing an accurate determination of the critical gel temperature by means of the frequency independence of the loss tangent.The gel point of PAN solutions increases with increasing H2O content.The scaling exponent n(=0.86) at the gel point is confirmed to be universal for PAN gels,which is independent of temperature,suggesting the similarity of the fractal structure in the critical PAN gels.展开更多
Nine thermotropic liquid crystalline terpolyesters based on vaniUic acid(V), p-hydroxybenzoic acid(H) and poly(ethylene terephthalate)(E) were investigated by thermogravimetry to ascertain their thermostability and th...Nine thermotropic liquid crystalline terpolyesters based on vaniUic acid(V), p-hydroxybenzoic acid(H) and poly(ethylene terephthalate)(E) were investigated by thermogravimetry to ascertain their thermostability and the kinetic parameters for thermal degradation. Overall activation energy data of the degradation had been calculated over the range 5 ～ 70% weight loss. The temperatures and the activation energy of the degradation lie in the ranges of 384 ～ 394 ℃ at a heating rate of 1℃/min and 176 ～ 205 KJ/mol at the weight loss of 5%, respectively, which suggests that the terpolyesters have good thermostability.展开更多
Four ferrocenyl long -chain alkyl β-diketonato zinc(Ⅱ) complexes with a general formulaZnL2 (L = C5H5FeC5an COCH COCnH2n+1.n= 6 - 9) were synthesized. These complexes were characterizedby elementary analysis, IR 1HN...Four ferrocenyl long -chain alkyl β-diketonato zinc(Ⅱ) complexes with a general formulaZnL2 (L = C5H5FeC5an COCH COCnH2n+1.n= 6 - 9) were synthesized. These complexes were characterizedby elementary analysis, IR 1HNMR MS. polarizing microscopy with a heating stage and DSC. It wasfound that the complexes have thermotropic liquid crystalline properties. The type of the heteronuclearliquid crystalline metal complexes have not been reported so far.展开更多
Blends of nylon 6 (PA6) and a semirigid thermotropic liquid crystalline polyarylester (THH) were prepared by coprecipitation. The changing of the morphology of the blends with their compositions was observed by means ...Blends of nylon 6 (PA6) and a semirigid thermotropic liquid crystalline polyarylester (THH) were prepared by coprecipitation. The changing of the morphology of the blends with their compositions was observed by means of a polarizing microscope and scanning electron microscope. The THH phases in the blends changed gradually from spherical droplets to fibrils with the increase of THH content. The flow behavior of the blends are quite different from that of the parent polymers and a very dramatic reduction in the melt viscosity of blends containing 5% THH was observed. The formation possibility of in-situ reinforcement composites of PA6 blends with a semirigid LCP is discussed in the present paper.展开更多
The blend system composed of PET and thermotropic liquid crystal copolyester based on hydroxy benzoic acid, terephthalic acid, diacetylnaphthalene and PET was studied. The results indicated that LCP could play the rol...The blend system composed of PET and thermotropic liquid crystal copolyester based on hydroxy benzoic acid, terephthalic acid, diacetylnaphthalene and PET was studied. The results indicated that LCP could play the role of crystal nuclei. The introduction of LCP decreased the melt viscosity of the system and fibrillous structure could be formed in favor conditions.展开更多
The present work concerns the crystallization of PET accelerated by addition of thermotropic liquid crystalline polymers (TLCP)based on two aromatic copolyesters: PHB/PET (60:40 ) and PHB/HDA/2,6-DNA /IPA ( 50:25 : 12...The present work concerns the crystallization of PET accelerated by addition of thermotropic liquid crystalline polymers (TLCP)based on two aromatic copolyesters: PHB/PET (60:40 ) and PHB/HDA/2,6-DNA /IPA ( 50:25 : 12.5 : 12.5 ). The investigation has been made by measurements of the cold-crystallization and melt-crystallization temperatures by DSC and of the changes of density and depolarizing light intensity during the isothermal process. In addition, the morphology of selectively etched surface of compressing pellets proved the presence of crystalline fibrillar structure, it can be supposed to have grown up from the micelle nucleus based on bundle of rigid TLCP chains.展开更多
Toughening the petroleum-based epoxy resin blends with bio-based modifiers without compromising their modulus,mechanical strength,and other properties is still a big challenge in view of the sustainability.In this stu...Toughening the petroleum-based epoxy resin blends with bio-based modifiers without compromising their modulus,mechanical strength,and other properties is still a big challenge in view of the sustainability.In this study,a bio-based liquid crystal epoxy resin(THMT-E P)with an s-triazine ring structure was utilized to modify a petroleum-based bisphenol A epoxy resin(E51)with 4,4'-diaminodiphenylsulfone(DDS)as a curing agent,and the blended systems were evaluated for their thermal stability,mechanical properties,and flame retardancy.The results showed that the impact strength of the blended system initially increased and then decreased with the increase in THMT-EP content,and it reached the a maximum value of 26.5 kJ/m^(2)when the THMT-EP content was 5%,which was 31.2%higher than that of E51/DDS.Notably,the flexural strength,modulus,and glass transition tem perature of the blended system were all simultaneously improved with the addition of THMT-EP.At the same time,the addition of THMT-EP enhanced the flame retardancy of the system by increasing the char yield at 700℃and decreasing the peak heat release rate and total heat release rate.This work paves the way for a more sustainable improvement in the comprehensive performance of epoxy resin.展开更多
The morphology of a thermotropic aromatic polyester during the transitions between isotropic and anisotropic melts was studied by means of polarizing microscopy and small angle light scattering techniques. Both transi...The morphology of a thermotropic aromatic polyester during the transitions between isotropic and anisotropic melts was studied by means of polarizing microscopy and small angle light scattering techniques. Both transition processes were found to be composed of the initiation of a new phase at local places of the old phase matrix and the growth of the new phase domains. A change of Hv scattering patterns was observed in the transition temperature ranges and was explained as the result of heterogeneity of the mesophase system, but not the change in ordering of a homogeneous mesophase.展开更多
The phase transition kinetics of thennotropic liquid crystalline aromatic-aliphatic regular copolyester: were studied by DSC. By means of Kissinger's method the kinetic equation and parameters including activation...The phase transition kinetics of thennotropic liquid crystalline aromatic-aliphatic regular copolyester: were studied by DSC. By means of Kissinger's method the kinetic equation and parameters including activation energy, rate order and preexponential factor for phase transition from nematic to isotropic were obtained. The activation energy from crystal to nematic was also presented.展开更多
The morphology of shear-oriented films of a thermotropic liquid crystalline polyester containing a triad ester mesogenic unit and a flexible spacer has been investigated in details. The formation conditions and proces...The morphology of shear-oriented films of a thermotropic liquid crystalline polyester containing a triad ester mesogenic unit and a flexible spacer has been investigated in details. The formation conditions and process, the fine structures and the relaxation process of mat structure in the oriented films have been observed and discussed.展开更多
Four novel copoly（ester-imide）s based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride, bis（trimellitic acid anhydride） phenyl ester and di-p-aminophenyl ester of dicarboxylic acids were synthesized via two-step...Four novel copoly（ester-imide）s based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride, bis（trimellitic acid anhydride） phenyl ester and di-p-aminophenyl ester of dicarboxylic acids were synthesized via two-step method in order to investigate whether two imide mesogenic units with different conformation and polarity could control the formation of LC-phase. Polarizes light microscopy （PLM） and differential scanning calorimetry （DSC） have shown that three polymers formed the nematic phase with ＂thread schlieren texture＂ and a polymer formed the nematic phase with ＂Inversion walls texture＂.展开更多
A novel engineering thermoplastic, phenolphthalein poly(ether ether sulfone)(PES C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheom...A novel engineering thermoplastic, phenolphthalein poly(ether ether sulfone)(PES C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheometrics dynamic spectrometer (RDS Ⅱ) and a CEAST capillary rheometer, a rheoscope 1000 were employed to investigate the melt rheology and extrusion behaviour at both the low and high shearing rates. The morphologies of the blends under different shearing were observed with a scanning electron microscope(SEM) and correlated to the observed rheology. The principal normal stress differences measured with cone and plate geometry give a temperature independent correlation for both blend and PES C when they are plotted against shear stress. But the extrudate swell of the blends showed a strong temperature dependence at each shear stress. The concentration dependence of extrudate swell shows a contrary behaviour to that of the inorganic filled system. A reasonable hypothesis based on the relaxation and disorientation of TLCP during flowing in the capillary and exiting was given to explain it. The melt fracture was checked after extrusion from capillary and was discussed.展开更多
Redox-active polyelectrolyte-surfactant complexes（PSC） were prepared via the ionic self-assembly of sodium poly（styrenesulfonate） （PSS） and ferrocenyl surfactant,（11-ferrocenylundecyl）trimethylammonium bromide...Redox-active polyelectrolyte-surfactant complexes（PSC） were prepared via the ionic self-assembly of sodium poly（styrenesulfonate） （PSS） and ferrocenyl surfactant,（11-ferrocenylundecyl）trimethylammonium bromide（FTMA） in aqueous solution. The PSS-FTMA complex exhibited an ordered interdigitated monolayer mesomorphous structure with the long period of d = 3.13 nm,and was in the ionic thermotropic liquid crystal SmA state at room temperature.Interestingly,in the solid complex, the ferrocenyl moieties formed H-aggregation showing an increase in theπ-π~＊ energy transfer of cyclopentadienes in the ferrocene moieties as known from the blue-shift in the UV spectrum.The complexes showed higher thermal stability compared with their components due to the ionic interaction.The PSS-FTMA film had a good redox reversibility,which promised to be used in electrochemical sensors.展开更多
The kinetics of phase transitions including a transition between mesophases were studied for a main-chain thermotropic polyester by means of DSC and depolarizing transmittance techniques. The isothermal process of the...The kinetics of phase transitions including a transition between mesophases were studied for a main-chain thermotropic polyester by means of DSC and depolarizing transmittance techniques. The isothermal process of these transitions was found to be described by the Avrami equation to high conversions. The Avrami exponents n are about 2,4, 5.3 and 2.2 for liquid crystallization, transition between mesophases and crystallization from mesophase respectively. The liquid crystallization from isotropic liquid phase occurs at very low undercoolings with high transformation rate. This behavior is explained as the results of the smaller value of the surface free energy for mesophase than that for crystallites which is evidenced by the very weak temperature dependence of liquid crystallization rate.展开更多
The lamellar structure of a thermotropic aromatic polyester with flexible spacer has beenstudied by using transmission electron microscopy. It was found that the lamellar structure couldbe observed in the crystalline ...The lamellar structure of a thermotropic aromatic polyester with flexible spacer has beenstudied by using transmission electron microscopy. It was found that the lamellar structure couldbe observed in the crystalline samples of this semirigid polymer crystallized from different states.The thickness of lamellae is around 10 nm, which is similar to that of the conventional polymersof flexible chain molecules. The molecular chains in the lamellae are oriented in the thicknessdirection as determined by electron diffraction. The possibility of molecular chains folding in the lamellae has been discussed.展开更多
Crystalline morphology in a series of CH_(3)-substituted main chain thermotropic aromatic polyesters with even and odd numbered methylene spacers has been studied by polarizing optical microscopy(POM),scanning electro...Crystalline morphology in a series of CH_(3)-substituted main chain thermotropic aromatic polyesters with even and odd numbered methylene spacers has been studied by polarizing optical microscopy(POM),scanning electron microscopy(SEM)and transmission electron microscopy(TEM).On crystallization from solution evaporation spherulites of radial structure were observed in the polymers with even numbered spacers,but spherulites with concentric rings form in the polymer with odd numbered spacers.Both spherulites have a lamellar structure,which is about 10 nm in thickness.On crystallization from nematic glassy state spherulites can not be grown;lamellar structure was only observed around disclinations in a specimen during crystallization.Ln the case of crystallization from nematic melt two types of spherulites can be observed far the sample with even numbered spacers.For the sample with add numbered spacers spherulites can not be formed,but only irregular crystallites.展开更多
A new spherulite-like structure of main chain thermotropic aromatic copolyesters formed in solution cast specimens was observed and was studied by means of polarizing microscopy, X-ray diffraction, SEM and IR spectrom...A new spherulite-like structure of main chain thermotropic aromatic copolyesters formed in solution cast specimens was observed and was studied by means of polarizing microscopy, X-ray diffraction, SEM and IR spectrometry. Results indicate that the spherulite-like structure of main chain thermotropic aromatic copolyesters formed from the casting solution (phenol/Cl2CH2CH2Cl2) is not a real crystal but only a high oriented arrangement of the macromolecular chains as a spherulite. This resulted from the interaction between the needle-like crystal of phenol and the rigid mesomorphic groups of molecular chain. The parallel packing of extended copolyester molecules along the needle-like crystal of phenol leads to the formation of the spherulite-like structure.展开更多
基金National Key Research and Development Program of China (No.2021YFB3700105)。
文摘The thermotropic liquid crystal polyester(TLCP)fiber is an increasingly important strategic high-performance fiber.In this paper,the TLCP was prepared by two-step melt polymerization using 4-hydroxybenzoic acid(HBA)and 6-hydroxy-2-naphthoic acid(HNA)as comonomers at a molar ratio of 7∶3.The structure of TLCP was confirmed by the Fourier transform infrared(FTIR)spectrometer and nuclear magnetic resonance(NMR)spectrometer.The thermal and rheological properties of TLCP before and after heat treatment were analyzed systematically by the differential scanning calorimeter(DSC),dynamic mechanical analyzer(DMA)and high-temperature rotational rheometer.The results revealed that the melting temperature,glass transition temperature and melt viscosity of the TLCP increased significantly after heat treatment.It indicates that the crystallization of the TLCP is perfect,and solid-phase condensation occurs during heat treatment,which increases its molecular mass.In conclusion,heat treatment at a temperature below but close to the melting temperature can effectively regulate the structure and properties of the TLCP,and the results of this study can provide a reference for the high strengthening of TLCP fibers.
文摘A new homologous series of thermotropic liquid crystalline copoly(arylidene-ether)s based on 4-teriary butyl cyclohexanone moiety were synthesized by solution polycondensation of 4,4’-diformyl-α,ω-diphenoxyalkanes, Ia-d or 4,4’- diformyl-2,2’-dimethoxy-α,ω-diphenoxyalkanes IIa-d with the 4-teriary butyl-cyclohexanone III and cyclopentanone. A model compound IV was synthesized from the monomer III with benzaldehyde and characterized by elemental and spectral analyses. The inherent viscosities of the resulting polymers were in the range 0.22 - 0.92 dI/g. All the copoly(arylidene-ether)s were insoluble in common organic solvents but dissolved completely in concentrated H2SO4 and formic acid. The mesomorphic properties of these polymers were studied as a function of the diphenoxyalkane space length. Their thermotropic liquid crystalline properties were examined by DSC and optical polarizing microscopy and demonstrated that the resulting polymers form nematic mesophases over wide temperature ranges. The thermogravimetric analyses of those polymers were evaluated by TGA and DSC measurements and correlated to their structural units. X-Ray analysis showed that copolymers having some degree of crystallinity in the region 2q = 5° -60°. In addition, the morphological properties of selected examples were tested by Scanning electron microscopy.
基金Acknowledgments： This work was supported in part by the National Natural Science Foundation of China （No. 20504023）.
文摘Adopting Poly（ethylene glycol） adipate Dilpoly- （ethylene glycol）] adipate polydiglycol adipate glycol （PDAG）, 1,4-butanediol （BDO）, hydroxy silicone oil, methylene diphenyl diisocyanate （MDI） as the raw material, a new polyurethane elastic body can be made through prepolymerization. After measurement of the moisture permeability, adsorption quantity and mechanical properties of the membrane made with the elastic body, we also proofed its formula by infrared spectroscopy. The result showed that the moisture permeability of the membrane, with a certain intelligent thermotropic quality, will increase by 3 to 4 times when the temperature is between 25℃-45℃.
基金Project(2006CB606505) supported by the National Basic Research Development Program of ChinaProject(50333050) supported by the National Natural Science Foundation of China+1 种基金Project(07DJ14002) supported by the Shanghai Fundamental Theory ProgramProject(20020255010) supported by the Specialized Research Fund for the Doctoral Program of Higher Education
文摘Dynamic viscoelastic properties of polyacrylonitrile(PAN)/DMSO/H2O solutions with different H2O contents were studied as a function of temperature.These PAN solutions gradually became gel with decreasing temperature.The sol-gel transition took place at a critical gel temperature,at which the scaling law of G'(ω)～G″(ω)∝ωn held,allowing an accurate determination of the critical gel temperature by means of the frequency independence of the loss tangent.The gel point of PAN solutions increases with increasing H2O content.The scaling exponent n(=0.86) at the gel point is confirmed to be universal for PAN gels,which is independent of temperature,suggesting the similarity of the fractal structure in the critical PAN gels.
基金Project supported by the National Natural Science Foundation of China.
文摘Nine thermotropic liquid crystalline terpolyesters based on vaniUic acid(V), p-hydroxybenzoic acid(H) and poly(ethylene terephthalate)(E) were investigated by thermogravimetry to ascertain their thermostability and the kinetic parameters for thermal degradation. Overall activation energy data of the degradation had been calculated over the range 5 ～ 70% weight loss. The temperatures and the activation energy of the degradation lie in the ranges of 384 ～ 394 ℃ at a heating rate of 1℃/min and 176 ～ 205 KJ/mol at the weight loss of 5%, respectively, which suggests that the terpolyesters have good thermostability.
文摘Four ferrocenyl long -chain alkyl β-diketonato zinc(Ⅱ) complexes with a general formulaZnL2 (L = C5H5FeC5an COCH COCnH2n+1.n= 6 - 9) were synthesized. These complexes were characterizedby elementary analysis, IR 1HNMR MS. polarizing microscopy with a heating stage and DSC. It wasfound that the complexes have thermotropic liquid crystalline properties. The type of the heteronuclearliquid crystalline metal complexes have not been reported so far.
文摘Blends of nylon 6 (PA6) and a semirigid thermotropic liquid crystalline polyarylester (THH) were prepared by coprecipitation. The changing of the morphology of the blends with their compositions was observed by means of a polarizing microscope and scanning electron microscope. The THH phases in the blends changed gradually from spherical droplets to fibrils with the increase of THH content. The flow behavior of the blends are quite different from that of the parent polymers and a very dramatic reduction in the melt viscosity of blends containing 5% THH was observed. The formation possibility of in-situ reinforcement composites of PA6 blends with a semirigid LCP is discussed in the present paper.
基金Projects supported by the National Natural Science Foundation of China and Polymer Physics Laboratory (Beijing), Academia Sinica.
文摘The blend system composed of PET and thermotropic liquid crystal copolyester based on hydroxy benzoic acid, terephthalic acid, diacetylnaphthalene and PET was studied. The results indicated that LCP could play the role of crystal nuclei. The introduction of LCP decreased the melt viscosity of the system and fibrillous structure could be formed in favor conditions.
文摘The present work concerns the crystallization of PET accelerated by addition of thermotropic liquid crystalline polymers (TLCP)based on two aromatic copolyesters: PHB/PET (60:40 ) and PHB/HDA/2,6-DNA /IPA ( 50:25 : 12.5 : 12.5 ). The investigation has been made by measurements of the cold-crystallization and melt-crystallization temperatures by DSC and of the changes of density and depolarizing light intensity during the isothermal process. In addition, the morphology of selectively etched surface of compressing pellets proved the presence of crystalline fibrillar structure, it can be supposed to have grown up from the micelle nucleus based on bundle of rigid TLCP chains.
基金financially supported by the National Natural Science Foundation of China(Nos.52073038 and 51873027)the Fundamental Research Funds for the Central Universities(No.DUT22LAB605)。
文摘Toughening the petroleum-based epoxy resin blends with bio-based modifiers without compromising their modulus,mechanical strength,and other properties is still a big challenge in view of the sustainability.In this study,a bio-based liquid crystal epoxy resin(THMT-E P)with an s-triazine ring structure was utilized to modify a petroleum-based bisphenol A epoxy resin(E51)with 4,4'-diaminodiphenylsulfone(DDS)as a curing agent,and the blended systems were evaluated for their thermal stability,mechanical properties,and flame retardancy.The results showed that the impact strength of the blended system initially increased and then decreased with the increase in THMT-EP content,and it reached the a maximum value of 26.5 kJ/m^(2)when the THMT-EP content was 5%,which was 31.2%higher than that of E51/DDS.Notably,the flexural strength,modulus,and glass transition tem perature of the blended system were all simultaneously improved with the addition of THMT-EP.At the same time,the addition of THMT-EP enhanced the flame retardancy of the system by increasing the char yield at 700℃and decreasing the peak heat release rate and total heat release rate.This work paves the way for a more sustainable improvement in the comprehensive performance of epoxy resin.
文摘The morphology of a thermotropic aromatic polyester during the transitions between isotropic and anisotropic melts was studied by means of polarizing microscopy and small angle light scattering techniques. Both transition processes were found to be composed of the initiation of a new phase at local places of the old phase matrix and the growth of the new phase domains. A change of Hv scattering patterns was observed in the transition temperature ranges and was explained as the result of heterogeneity of the mesophase system, but not the change in ordering of a homogeneous mesophase.
文摘The phase transition kinetics of thennotropic liquid crystalline aromatic-aliphatic regular copolyester: were studied by DSC. By means of Kissinger's method the kinetic equation and parameters including activation energy, rate order and preexponential factor for phase transition from nematic to isotropic were obtained. The activation energy from crystal to nematic was also presented.
文摘The morphology of shear-oriented films of a thermotropic liquid crystalline polyester containing a triad ester mesogenic unit and a flexible spacer has been investigated in details. The formation conditions and process, the fine structures and the relaxation process of mat structure in the oriented films have been observed and discussed.
基金supported by the National Science Foundation of China(No.50433010).
文摘Four novel copoly（ester-imide）s based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride, bis（trimellitic acid anhydride） phenyl ester and di-p-aminophenyl ester of dicarboxylic acids were synthesized via two-step method in order to investigate whether two imide mesogenic units with different conformation and polarity could control the formation of LC-phase. Polarizes light microscopy （PLM） and differential scanning calorimetry （DSC） have shown that three polymers formed the nematic phase with ＂thread schlieren texture＂ and a polymer formed the nematic phase with ＂Inversion walls texture＂.
文摘A novel engineering thermoplastic, phenolphthalein poly(ether ether sulfone)(PES C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheometrics dynamic spectrometer (RDS Ⅱ) and a CEAST capillary rheometer, a rheoscope 1000 were employed to investigate the melt rheology and extrusion behaviour at both the low and high shearing rates. The morphologies of the blends under different shearing were observed with a scanning electron microscope(SEM) and correlated to the observed rheology. The principal normal stress differences measured with cone and plate geometry give a temperature independent correlation for both blend and PES C when they are plotted against shear stress. But the extrudate swell of the blends showed a strong temperature dependence at each shear stress. The concentration dependence of extrudate swell shows a contrary behaviour to that of the inorganic filled system. A reasonable hypothesis based on the relaxation and disorientation of TLCP during flowing in the capillary and exiting was given to explain it. The melt fracture was checked after extrusion from capillary and was discussed.
基金The financial support from the NSFC(No50873037)China Postdoctoral Science Foundation(Nos20100470908 and 201104349)the NSF of Guangdong Province(No10451064101005118)
文摘Redox-active polyelectrolyte-surfactant complexes（PSC） were prepared via the ionic self-assembly of sodium poly（styrenesulfonate） （PSS） and ferrocenyl surfactant,（11-ferrocenylundecyl）trimethylammonium bromide（FTMA） in aqueous solution. The PSS-FTMA complex exhibited an ordered interdigitated monolayer mesomorphous structure with the long period of d = 3.13 nm,and was in the ionic thermotropic liquid crystal SmA state at room temperature.Interestingly,in the solid complex, the ferrocenyl moieties formed H-aggregation showing an increase in theπ-π~＊ energy transfer of cyclopentadienes in the ferrocene moieties as known from the blue-shift in the UV spectrum.The complexes showed higher thermal stability compared with their components due to the ionic interaction.The PSS-FTMA film had a good redox reversibility,which promised to be used in electrochemical sensors.
文摘The kinetics of phase transitions including a transition between mesophases were studied for a main-chain thermotropic polyester by means of DSC and depolarizing transmittance techniques. The isothermal process of these transitions was found to be described by the Avrami equation to high conversions. The Avrami exponents n are about 2,4, 5.3 and 2.2 for liquid crystallization, transition between mesophases and crystallization from mesophase respectively. The liquid crystallization from isotropic liquid phase occurs at very low undercoolings with high transformation rate. This behavior is explained as the results of the smaller value of the surface free energy for mesophase than that for crystallites which is evidenced by the very weak temperature dependence of liquid crystallization rate.
文摘The lamellar structure of a thermotropic aromatic polyester with flexible spacer has beenstudied by using transmission electron microscopy. It was found that the lamellar structure couldbe observed in the crystalline samples of this semirigid polymer crystallized from different states.The thickness of lamellae is around 10 nm, which is similar to that of the conventional polymersof flexible chain molecules. The molecular chains in the lamellae are oriented in the thicknessdirection as determined by electron diffraction. The possibility of molecular chains folding in the lamellae has been discussed.
基金This work was supported by the National Key Prject of Fundamental Research"Maromolcular Condensed State"Ministy of Scicncc and Technology,China and by Polymer Physics Laboratory,Chinesec Academy of Science.
文摘Crystalline morphology in a series of CH_(3)-substituted main chain thermotropic aromatic polyesters with even and odd numbered methylene spacers has been studied by polarizing optical microscopy(POM),scanning electron microscopy(SEM)and transmission electron microscopy(TEM).On crystallization from solution evaporation spherulites of radial structure were observed in the polymers with even numbered spacers,but spherulites with concentric rings form in the polymer with odd numbered spacers.Both spherulites have a lamellar structure,which is about 10 nm in thickness.On crystallization from nematic glassy state spherulites can not be grown;lamellar structure was only observed around disclinations in a specimen during crystallization.Ln the case of crystallization from nematic melt two types of spherulites can be observed far the sample with even numbered spacers.For the sample with add numbered spacers spherulites can not be formed,but only irregular crystallites.
基金This work was supported by the National Key Project for Fundamental Research"Macromolecular Condensed State",The State Science and Technology Commission of China.
文摘A new spherulite-like structure of main chain thermotropic aromatic copolyesters formed in solution cast specimens was observed and was studied by means of polarizing microscopy, X-ray diffraction, SEM and IR spectrometry. Results indicate that the spherulite-like structure of main chain thermotropic aromatic copolyesters formed from the casting solution (phenol/Cl2CH2CH2Cl2) is not a real crystal but only a high oriented arrangement of the macromolecular chains as a spherulite. This resulted from the interaction between the needle-like crystal of phenol and the rigid mesomorphic groups of molecular chain. The parallel packing of extended copolyester molecules along the needle-like crystal of phenol leads to the formation of the spherulite-like structure.
