The microstructures of the YBCO composited superconducting tapes with different J_c were analysed by TEM.The relationship between microstructure and J_c of the tapes is discussed in detail.It is demonstrated that J_c ...The microstructures of the YBCO composited superconducting tapes with different J_c were analysed by TEM.The relationship between microstructure and J_c of the tapes is discussed in detail.It is demonstrated that J_c value of the tapes increases significantly with the decrease in the width of grain boundary,increase of the twin density and the reducing of the amount of precipitates at grain boundary.At grain boundary of the tapes,howev- er,small amount of non-superconducting phases can-not be avoided.For the fabrication of high J_c YBCO com- posited tapes,it is very important to improve the microstructure of the superconductor perfectly.展开更多
At present,there are few studies on the phase transition during the thermocompression plastic deformation of magnesium alloy.In this study,the evolution model of thermal compression plastic of AZ31 magnesium alloy was...At present,there are few studies on the phase transition during the thermocompression plastic deformation of magnesium alloy.In this study,the evolution model of thermal compression plastic of AZ31 magnesium alloy was constructed by molecular dynamics,and the phase transition relationship between HCP and FCC at different thermal compression rates was studied.By combining GLEEBLE thermal compression experiment with transmission electron microscopy experiment,high-resolution transmission electron microscopy images were taken to analyze the transition rules between HCP and FCC during plastic deformation at different thermal compression rates,and the accuracy of molecular dynamics analysis was verified.It is found that the slip of Shockley’s incomplete dislocation produces obvious HCP→FCC phase transition at low strain rate and base plane dislocation at high strain rate,which makes the amorphous phase transition of HCP→OTHER more obvious,which provides theoretical guidance for the formulation of forming mechanism and preparation process of magnesium alloy.展开更多
Due to their hexagonal crystal structure,magnesium alloys have relatively low workability at room temperature.In this study,the hot workability behavior of cast-extruded AZ31B magnesium alloy is studied through hot co...Due to their hexagonal crystal structure,magnesium alloys have relatively low workability at room temperature.In this study,the hot workability behavior of cast-extruded AZ31B magnesium alloy is studied through hot compression testing,numerical modeling and microstructural analyses.Hot deformation tests are performed at temperatures of 250℃ to 400℃ under strain rates of 0.01 to 1.0 s^(−1).Transmission electron microscopy is used to reveal the presence of dynamic recrystallization(DRX),dynamic recovery(DRY),cracks and shear bands.To predict plastic instabilities during hot compression tests of AZ31B magnesium alloy,the authors use Johnson–Cook damage model in a 3D finite element simulation.The optimal hot workability of magnesium alloy is found at a temperature(T)of 400℃ and strain rate(ε)of 0.01 s^(−1).Stability is found at a lower strain rate,and instability is found at a higher strain rate.展开更多
Thermo-Calc software package (TCP+DICTRA) was used to simulate the carbide transformation process in die steel for plastic. Combined with TEM analysis, the calculated result confirms that the carbide in equilibrium st...Thermo-Calc software package (TCP+DICTRA) was used to simulate the carbide transformation process in die steel for plastic. Combined with TEM analysis, the calculated result confirms that the carbide in equilibrium state is M_7C_3 carbide. The dissolution of M_7C_3 carbide in steel is predicted by DICTRA program. It was shown that the temperature remarkably affects the dissolution process of M_7C_3 carbide, but the influence of alloy elements such as manganese and molybdenum can be neglected in this steel.展开更多
The upstream process was carried out in an animal component-free medium on Cytodex 1 microcarriers. Recombinant trypsin is a non-animal derived protease used as an alternative to animal-derived trypsin. To inactivate ...The upstream process was carried out in an animal component-free medium on Cytodex 1 microcarriers. Recombinant trypsin is a non-animal derived protease used as an alternative to animal-derived trypsin. To inactivate recombinant trypsin, a soybean trypsin inhibitor (STI) should be added to the medium. A protocol was first tested in T-flasks and then passaged to 500 mL and 3 L spinner flasks. Cell detachment was completed in 10 - 12 min, and 0.4 g/L STI was added to a 3L spinner, and cells were transferred into a 30 L stirred tank bioreactor. On day 5, the cell density had reached its maximum (around 1.8 × 106 cells/mL). At an MOI of 0.3 with serum-free medium conditions, cell infection yielded a maximal rabies virus titer of 1.82 × 10<sup>7</sup> FFU/mL at 5 days. All cell culture conditions and virus growth kinetics in serum-free media were investigated. In conclusion, Vero cells were grown on Cytodex 1 with serum-free media and a high amount of rabies virus was obtained. A mouse challenge was used to determine the immune response to an inactivated rabies virus vaccine candidate. Also, we evaluated inactive rabies vaccine candidate safety, and immunogenicity in mice, sheep, horses, and cattle. We found that no horses, sheep, or cattle who were given vaccine IM at 3.2 IU/dose exhibited any clinical sign of disease and all developed high VNA titers (up to 10.03 IU/mL) by 3 - 4 WPI. After the accelerated stability studies, the lyophilized inactivated rabies vaccine candidate showed enough antigenic potency (2.6 IU/mL) in the mouse challenge test. Also, 18-month long-term stability studies showed enough immune response (1.93 IU/mL) on day 14. The activity of the vaccine candidate showed a good immune response and safety criteria that meet WHO requirements. This is the first pilot-scale mammalian cell-based viral rabies vaccine production study in Türkiye that used microcarriers.展开更多
Peculiar and unique growth mechanisms involved in semiconductor nanowires(NWs)pave the way to the achievement of new crystallographic phases and remarkable material properties,and hence,studying polytypism in semicond...Peculiar and unique growth mechanisms involved in semiconductor nanowires(NWs)pave the way to the achievement of new crystallographic phases and remarkable material properties,and hence,studying polytypism in semiconductor NWs arouses a strong interest for the next generation of electronic and photonic applications.In this context,the growth of ZnS nanowires has been investigated,as bulk ZnS compound exhibits numerous unstable polytypes at high temperatures,but their stable occurrence is highly anticipated in a nanowire due to its special quasi-dimensional shape and growth modes.In this work,the idea is to provide a change in the growth mechanism via the physical state of catalyst droplet(liquid or solid)and hence,study the induced structural modifications in ZnS nanowires.The HRTEM images of VLS(via liquid alloyed catalyst)grown ZnS NWs show periodic stacking faults,which is precisely identified as a stacking sequence of cubic or hexagonal individual planes leading to an astonishing 15R crystal polymorph.This crystallographic phase is observed for the first time in nanowires.Contrastingly,NWs grown with VSS(via solid catalyst)show crystal polytypes of zinc blende and wurtzite.We calculate and discuss the role of cohesive energies in the formation of such ZnS polytypes.Further,we present the selection rules for the crystallization of such 15R structure in NWs and discuss the involved VLS and VSS growth mechanisms leading to the formation of different crystal phases.展开更多
文摘The microstructures of the YBCO composited superconducting tapes with different J_c were analysed by TEM.The relationship between microstructure and J_c of the tapes is discussed in detail.It is demonstrated that J_c value of the tapes increases significantly with the decrease in the width of grain boundary,increase of the twin density and the reducing of the amount of precipitates at grain boundary.At grain boundary of the tapes,howev- er,small amount of non-superconducting phases can-not be avoided.For the fabrication of high J_c YBCO com- posited tapes,it is very important to improve the microstructure of the superconductor perfectly.
基金supported by the National Key Research and Development Project(No.2018YFB1307902)the National Natural Science Foundation of China(No.52175353,51905366 and 52275382)+5 种基金Shanxi young top tal-ent project,Shanxi Province Science Foundation for Youths(No.201901D211312)Excellent young academic leaders in Shanxi colleges and universities(No.2019045)Excellent Achievements Cultivation Project of Shanxi Higher Education Institutions(No.2019KJ028)Key Research and Development Projects of Shanxi Province(No.201903D121043)Key Research and Development Plan of Shanxi Province(No.202102150401002)Innovative projects in graduate education(NO.XCX211001).
文摘At present,there are few studies on the phase transition during the thermocompression plastic deformation of magnesium alloy.In this study,the evolution model of thermal compression plastic of AZ31 magnesium alloy was constructed by molecular dynamics,and the phase transition relationship between HCP and FCC at different thermal compression rates was studied.By combining GLEEBLE thermal compression experiment with transmission electron microscopy experiment,high-resolution transmission electron microscopy images were taken to analyze the transition rules between HCP and FCC during plastic deformation at different thermal compression rates,and the accuracy of molecular dynamics analysis was verified.It is found that the slip of Shockley’s incomplete dislocation produces obvious HCP→FCC phase transition at low strain rate and base plane dislocation at high strain rate,which makes the amorphous phase transition of HCP→OTHER more obvious,which provides theoretical guidance for the formulation of forming mechanism and preparation process of magnesium alloy.
文摘Due to their hexagonal crystal structure,magnesium alloys have relatively low workability at room temperature.In this study,the hot workability behavior of cast-extruded AZ31B magnesium alloy is studied through hot compression testing,numerical modeling and microstructural analyses.Hot deformation tests are performed at temperatures of 250℃ to 400℃ under strain rates of 0.01 to 1.0 s^(−1).Transmission electron microscopy is used to reveal the presence of dynamic recrystallization(DRX),dynamic recovery(DRY),cracks and shear bands.To predict plastic instabilities during hot compression tests of AZ31B magnesium alloy,the authors use Johnson–Cook damage model in a 3D finite element simulation.The optimal hot workability of magnesium alloy is found at a temperature(T)of 400℃ and strain rate(ε)of 0.01 s^(−1).Stability is found at a lower strain rate,and instability is found at a higher strain rate.
文摘Thermo-Calc software package (TCP+DICTRA) was used to simulate the carbide transformation process in die steel for plastic. Combined with TEM analysis, the calculated result confirms that the carbide in equilibrium state is M_7C_3 carbide. The dissolution of M_7C_3 carbide in steel is predicted by DICTRA program. It was shown that the temperature remarkably affects the dissolution process of M_7C_3 carbide, but the influence of alloy elements such as manganese and molybdenum can be neglected in this steel.
文摘The upstream process was carried out in an animal component-free medium on Cytodex 1 microcarriers. Recombinant trypsin is a non-animal derived protease used as an alternative to animal-derived trypsin. To inactivate recombinant trypsin, a soybean trypsin inhibitor (STI) should be added to the medium. A protocol was first tested in T-flasks and then passaged to 500 mL and 3 L spinner flasks. Cell detachment was completed in 10 - 12 min, and 0.4 g/L STI was added to a 3L spinner, and cells were transferred into a 30 L stirred tank bioreactor. On day 5, the cell density had reached its maximum (around 1.8 × 106 cells/mL). At an MOI of 0.3 with serum-free medium conditions, cell infection yielded a maximal rabies virus titer of 1.82 × 10<sup>7</sup> FFU/mL at 5 days. All cell culture conditions and virus growth kinetics in serum-free media were investigated. In conclusion, Vero cells were grown on Cytodex 1 with serum-free media and a high amount of rabies virus was obtained. A mouse challenge was used to determine the immune response to an inactivated rabies virus vaccine candidate. Also, we evaluated inactive rabies vaccine candidate safety, and immunogenicity in mice, sheep, horses, and cattle. We found that no horses, sheep, or cattle who were given vaccine IM at 3.2 IU/dose exhibited any clinical sign of disease and all developed high VNA titers (up to 10.03 IU/mL) by 3 - 4 WPI. After the accelerated stability studies, the lyophilized inactivated rabies vaccine candidate showed enough antigenic potency (2.6 IU/mL) in the mouse challenge test. Also, 18-month long-term stability studies showed enough immune response (1.93 IU/mL) on day 14. The activity of the vaccine candidate showed a good immune response and safety criteria that meet WHO requirements. This is the first pilot-scale mammalian cell-based viral rabies vaccine production study in Türkiye that used microcarriers.
文摘Peculiar and unique growth mechanisms involved in semiconductor nanowires(NWs)pave the way to the achievement of new crystallographic phases and remarkable material properties,and hence,studying polytypism in semiconductor NWs arouses a strong interest for the next generation of electronic and photonic applications.In this context,the growth of ZnS nanowires has been investigated,as bulk ZnS compound exhibits numerous unstable polytypes at high temperatures,but their stable occurrence is highly anticipated in a nanowire due to its special quasi-dimensional shape and growth modes.In this work,the idea is to provide a change in the growth mechanism via the physical state of catalyst droplet(liquid or solid)and hence,study the induced structural modifications in ZnS nanowires.The HRTEM images of VLS(via liquid alloyed catalyst)grown ZnS NWs show periodic stacking faults,which is precisely identified as a stacking sequence of cubic or hexagonal individual planes leading to an astonishing 15R crystal polymorph.This crystallographic phase is observed for the first time in nanowires.Contrastingly,NWs grown with VSS(via solid catalyst)show crystal polytypes of zinc blende and wurtzite.We calculate and discuss the role of cohesive energies in the formation of such ZnS polytypes.Further,we present the selection rules for the crystallization of such 15R structure in NWs and discuss the involved VLS and VSS growth mechanisms leading to the formation of different crystal phases.
