This study aims to investigate the intricate dynamic characteristics of the high-speed duct during the over-under Turbine-Based Combined Cycle(TBCC)inlet mode transition process while operating in an off-design state ...This study aims to investigate the intricate dynamic characteristics of the high-speed duct during the over-under Turbine-Based Combined Cycle(TBCC)inlet mode transition process while operating in an off-design state under throttled conditions.A typical over-under TBCC inlet,designed for a working Mach number range of 0–6 with a transition Mach number of 3.5,is examined through experimental studies in a supersonic wind tunnel with a freestream Mach number of2.9.The investigation focuses on the complex oscillatory flow and unique hysteresis observed in the mode transition process of the high-speed duct under the mildly throttled condition,utilizing highspeed schlieren and dynamic pressure acquisition system.The findings reveal that the high-speed duct undergoes four distinct oscillation stages akin to those in a higher throttled state during the mode transition,albeit with smaller dominant frequency and energy.Moreover,an irregular alternating“big/little buzz”mode is observed in the early stage of the large oscillation stage.Notably,the mildly throttled state exhibits three intriguing hysteresis properties compared to the unthrottled and higher throttled states.Firstly,hysteresis is observed in the shock train motion stage in the duct before unstart,along with the corresponding inverse process.Subsequently,hysteresis is noted in the unstart and restart of the high-speed duct,with a smaller hysteresis interval than in the unthrottled state.Finally,the hysteresis characteristics of oscillation mode switching and the corresponding inverse process are explored.Based on the analysis,the first two hysteresis phenomena are associated with the formation and dissipation of the separation bubble.The significant adverse pressure gradient constrains the cross-sectional capacity of the channel,rendering the disappearance of the separation bubble more challenging.The hysteresis in oscillation mode switching is linked to not only the channel cross-sectional capacity but also the state of the incoming boundary layer.展开更多
The study presents an experimental exploration into the mode transition of an overunder TBCC(Turbine-Based Combined Cycle)inlet,with a specific emphasis on the flow characteristics at off-design transition Mach number...The study presents an experimental exploration into the mode transition of an overunder TBCC(Turbine-Based Combined Cycle)inlet,with a specific emphasis on the flow characteristics at off-design transition Mach number.A systematic investigation was undertaken into the mode transition characteristics in both unthrottled and throttled conditions within a highspeed duct,employing high speed Schlieren and dynamic pressure acquisition systems.The results show that the high-speed duct faced flow oscillations primarily dictated by the separation bubble near the duct entrance during the downward rotation of splitter,leading to the duct’s unstart under the unthrottled condition.During the splitter’s reverse rotation,a notable hysteresis of unstart/restart of the high-speed duct was observed.Conversely,hysteresis vanishes when the initial flowfield nears the critical state owing to downstream throttling.Moreover,the oscillatory diversity,a distinctive characteristic of the high-speed duct,was firstly observed during the mode transition induced by throttling.The flow evolution was divided into four stages:an initial instability stage characterized by low-frequency oscillations below 255 Hz induced by shock train self-excitation oscillation and high-frequency oscillations around 1367 Hz caused by the movement of separation bubble.This stage is succeeded by the“big buzz”phase,comprised of pressure accumulation/release within the overflow-free duct and shock motion outside the duct to retain dynamic flow balance.The dominant frequency escalated with the increase of the internal contraction ratio in the range of 280 Hz to 400 Hz.This was followed by a high-frequency oscillation stage around 453 Hz dominated by a large internal contraction ratio with low pulsating energy,accompanied by a continuous supersonic overflow.Lastly,as the splitter gradually intersected the boundary layer of the first-stage compression surface,the capture area and the turbulence intensity of the incoming flow underwent a sudden shift,leading to a more diverse flow oscillation within the duct,manifested as various forms of mixed buzz.展开更多
采用拓展中心线、不同的流通截面面积变化规律和倒圆半径变化规律对内并联型TBCC（turbine based combined cycle engine）进气道涡轮通道扩张段进行了设计．通过数值模拟的手段，对涡轮通道扩张段设计参数的影响规律和涡轮模态下涡轮...采用拓展中心线、不同的流通截面面积变化规律和倒圆半径变化规律对内并联型TBCC（turbine based combined cycle engine）进气道涡轮通道扩张段进行了设计．通过数值模拟的手段，对涡轮通道扩张段设计参数的影响规律和涡轮模态下涡轮通道扩张段的气动特性进行了研究，并利用高速风洞试验结果对数值模拟方法进行了验证．研究结果表明：中心线控制点纵坐标在1．50～2．25、涡轮通道扩张段出口等直段长度与出口直径比值在0．3～0．7的范围内取值时，涡轮通道扩张段可获得较高的出口总压恢复系数和较小的出口总压畸变指数；采用前急后缓的流通截面面积和倒圆半径变化规律能使涡轮通道扩张段获得较小的出口总压畸变指数；随着飞行马赫数的增加，进气道和涡轮通道扩张段的流量系数先不断减小，在飞行马赫数为0．9附近达到最小，之后又逐渐增加，涡轮通道扩张段出口总压恢复系数不断升高，在飞行马赫数为0．7附近达到最大，之后又逐渐降低；涡轮模态下，涡轮通道扩张段出口总压畸变指数均小于0．5，能很好地满足涡轮发动机对进口流场的要求．展开更多
对涡轮基组合循环(Turbine Based Combined Cycle, TBCC)发动机涡轮进气道进行喷水冷却是解决TBCC发动机推力不连续问题的有效方式之一。本文基于实际流场条件选取某型TBCC发动机涡轮进气道结构,对进气道内喷水冷却特性进行了数值仿真,...对涡轮基组合循环(Turbine Based Combined Cycle, TBCC)发动机涡轮进气道进行喷水冷却是解决TBCC发动机推力不连续问题的有效方式之一。本文基于实际流场条件选取某型TBCC发动机涡轮进气道结构,对进气道内喷水冷却特性进行了数值仿真,研究飞行器不同工况下水滴的蒸发特性及喷水对来流高温空气的预冷效果。结果表明,来流空气温度降幅随水气比提高而增大,最高温降可达152.4K。水气比提高后水滴蒸发率逐渐降低,但蒸发总量仍会继续上升。相同水气比条件下,飞行马赫数越高,喷水冷却效果越明显。在Ma3.5飞行速度和水气比0.03条件下有最高蒸发率,达83.05%。喷水冷却有效扩展了涡轮模态飞行马赫数,最高能使飞行速度提升至Ma2.84,即喷水冷却扩展了TBCC从涡轮模态向超燃冲压模态转换的衔接速域。展开更多
基金funded by the National Natural Science Foundation of China(Nos.12025202,U20A2070,12172175)the National Science and Technology Major Project,China(No.J2019-Ⅱ-0014-0035)+2 种基金the Postdoctoral Fellowship Program of CPSF,China(No.GZB20230970)the Science Center for Gas Turbine Project,China(Nos.P2022-C-II-002-001,P2022-A-II-002-001)the Young Scientific and Technological Talents Project of Jiangsu Association for Science and Technology,China(No.TJ-2021-052)。
文摘This study aims to investigate the intricate dynamic characteristics of the high-speed duct during the over-under Turbine-Based Combined Cycle(TBCC)inlet mode transition process while operating in an off-design state under throttled conditions.A typical over-under TBCC inlet,designed for a working Mach number range of 0–6 with a transition Mach number of 3.5,is examined through experimental studies in a supersonic wind tunnel with a freestream Mach number of2.9.The investigation focuses on the complex oscillatory flow and unique hysteresis observed in the mode transition process of the high-speed duct under the mildly throttled condition,utilizing highspeed schlieren and dynamic pressure acquisition system.The findings reveal that the high-speed duct undergoes four distinct oscillation stages akin to those in a higher throttled state during the mode transition,albeit with smaller dominant frequency and energy.Moreover,an irregular alternating“big/little buzz”mode is observed in the early stage of the large oscillation stage.Notably,the mildly throttled state exhibits three intriguing hysteresis properties compared to the unthrottled and higher throttled states.Firstly,hysteresis is observed in the shock train motion stage in the duct before unstart,along with the corresponding inverse process.Subsequently,hysteresis is noted in the unstart and restart of the high-speed duct,with a smaller hysteresis interval than in the unthrottled state.Finally,the hysteresis characteristics of oscillation mode switching and the corresponding inverse process are explored.Based on the analysis,the first two hysteresis phenomena are associated with the formation and dissipation of the separation bubble.The significant adverse pressure gradient constrains the cross-sectional capacity of the channel,rendering the disappearance of the separation bubble more challenging.The hysteresis in oscillation mode switching is linked to not only the channel cross-sectional capacity but also the state of the incoming boundary layer.
基金funded by the National Natural Science Foundation of China(Nos.12025202,U20A2070 and 12172175)the National Science and Technology Major Project,China(No.J2019-Ⅱ-0014-0035)+2 种基金the Postdoctoral Fellowship Program of CPSF,China(No.GZB20230970)the Science Center for Gas Turbine Project,China(Nos.P2022-C-Ⅱ-002-001 and P2022-A-Ⅱ-002-001)the Young Scientific and Technological Talents Project of Jiangsu Association for Science and Technology,China(No.TJ-2021-052).
文摘The study presents an experimental exploration into the mode transition of an overunder TBCC(Turbine-Based Combined Cycle)inlet,with a specific emphasis on the flow characteristics at off-design transition Mach number.A systematic investigation was undertaken into the mode transition characteristics in both unthrottled and throttled conditions within a highspeed duct,employing high speed Schlieren and dynamic pressure acquisition systems.The results show that the high-speed duct faced flow oscillations primarily dictated by the separation bubble near the duct entrance during the downward rotation of splitter,leading to the duct’s unstart under the unthrottled condition.During the splitter’s reverse rotation,a notable hysteresis of unstart/restart of the high-speed duct was observed.Conversely,hysteresis vanishes when the initial flowfield nears the critical state owing to downstream throttling.Moreover,the oscillatory diversity,a distinctive characteristic of the high-speed duct,was firstly observed during the mode transition induced by throttling.The flow evolution was divided into four stages:an initial instability stage characterized by low-frequency oscillations below 255 Hz induced by shock train self-excitation oscillation and high-frequency oscillations around 1367 Hz caused by the movement of separation bubble.This stage is succeeded by the“big buzz”phase,comprised of pressure accumulation/release within the overflow-free duct and shock motion outside the duct to retain dynamic flow balance.The dominant frequency escalated with the increase of the internal contraction ratio in the range of 280 Hz to 400 Hz.This was followed by a high-frequency oscillation stage around 453 Hz dominated by a large internal contraction ratio with low pulsating energy,accompanied by a continuous supersonic overflow.Lastly,as the splitter gradually intersected the boundary layer of the first-stage compression surface,the capture area and the turbulence intensity of the incoming flow underwent a sudden shift,leading to a more diverse flow oscillation within the duct,manifested as various forms of mixed buzz.
文摘采用拓展中心线、不同的流通截面面积变化规律和倒圆半径变化规律对内并联型TBCC（turbine based combined cycle engine）进气道涡轮通道扩张段进行了设计．通过数值模拟的手段，对涡轮通道扩张段设计参数的影响规律和涡轮模态下涡轮通道扩张段的气动特性进行了研究，并利用高速风洞试验结果对数值模拟方法进行了验证．研究结果表明：中心线控制点纵坐标在1．50～2．25、涡轮通道扩张段出口等直段长度与出口直径比值在0．3～0．7的范围内取值时，涡轮通道扩张段可获得较高的出口总压恢复系数和较小的出口总压畸变指数；采用前急后缓的流通截面面积和倒圆半径变化规律能使涡轮通道扩张段获得较小的出口总压畸变指数；随着飞行马赫数的增加，进气道和涡轮通道扩张段的流量系数先不断减小，在飞行马赫数为0．9附近达到最小，之后又逐渐增加，涡轮通道扩张段出口总压恢复系数不断升高，在飞行马赫数为0．7附近达到最大，之后又逐渐降低；涡轮模态下，涡轮通道扩张段出口总压畸变指数均小于0．5，能很好地满足涡轮发动机对进口流场的要求．
文摘对涡轮基组合循环(Turbine Based Combined Cycle, TBCC)发动机涡轮进气道进行喷水冷却是解决TBCC发动机推力不连续问题的有效方式之一。本文基于实际流场条件选取某型TBCC发动机涡轮进气道结构,对进气道内喷水冷却特性进行了数值仿真,研究飞行器不同工况下水滴的蒸发特性及喷水对来流高温空气的预冷效果。结果表明,来流空气温度降幅随水气比提高而增大,最高温降可达152.4K。水气比提高后水滴蒸发率逐渐降低,但蒸发总量仍会继续上升。相同水气比条件下,飞行马赫数越高,喷水冷却效果越明显。在Ma3.5飞行速度和水气比0.03条件下有最高蒸发率,达83.05%。喷水冷却有效扩展了涡轮模态飞行马赫数,最高能使飞行速度提升至Ma2.84,即喷水冷却扩展了TBCC从涡轮模态向超燃冲压模态转换的衔接速域。
