This study focuses on the bifurcation characteristics of the four degree-of- freedom gear system with local spalling defect to explore the spalling nonlinear dynamic mechanism. The dynamic model of the gear system wit...This study focuses on the bifurcation characteristics of the four degree-of- freedom gear system with local spalling defect to explore the spalling nonlinear dynamic mechanism. The dynamic model of the gear system with spalling defect, time-variant mesh stiffness, and nonlinear clearance is established to investigate the effect of spaUing defect on mesh stiffness and dynamic bifurcation. The primary resonance and internal resonance responses of the spalling model are analyzed by the averaging method, and the bifurcation characteristics with the evolvement of spall and internal excitation are studied by employing the singularity theory for the two-state variable system, which reveal the different bifurcation characteristics caused by the spalling defect. The results obtained herein can provide a theoretical basis to spalling fault diagnosis of gearbox.展开更多
A rockbolt acting in the rock mass is subjected to the combined action of the pull-out load and confining pressure, and the bond quality of the rockbolt directly affects the stability of the roadway and cavern. Theref...A rockbolt acting in the rock mass is subjected to the combined action of the pull-out load and confining pressure, and the bond quality of the rockbolt directly affects the stability of the roadway and cavern. Therefore, in this study, confining pressure and pull-out load are applied to grouted rockbolt systems with bond defects by a numerical simulation method, and the rockbolt is detected by ultrasonic guided waves to study the propagation law of ultrasonic guided waves in defective rockbolt systems and the bond quality of rockbolts under the combined action of pull-out load and confining pressure. The numerical simulation results show that the length and location of bond defects can be detected by ultrasonic guided waves under the combined action of pull-out load and confining pressure. Under no pull-out load, with increasing confining pressure, the low-frequency part of the guided wave frequency in the rockbolt increases, the high-frequency part decreases, the weakening effect of the confining pressure on the guided wave propagation law increases, and the bond quality of the rockbolt increases. The existence of defects cannot change the strengthening effect of the confining pressure on the guided wave propagation law under the same pull-out load or the weakening effect of the pull-out load on the guided wave propagation law under the same confining pressure.展开更多
Entanglement due to the interaction of a two level atom with a laser and quantized field is investigated. The role of the nonlinearity due to these interactions is discussed. It is found that the nonlinearity changes ...Entanglement due to the interaction of a two level atom with a laser and quantized field is investigated. The role of the nonlinearity due to these interactions is discussed. It is found that the nonlinearity changes strongly the behavior of the entanglement also the detuning parameters have important role in the structure of the measure of entanglement.展开更多
This paper gives a dynamic decoupling approach for the analysis of large scale non-classically damped system, in which the complex variable computations were completely avoided not only in solving for the eigenvalue p...This paper gives a dynamic decoupling approach for the analysis of large scale non-classically damped system, in which the complex variable computations were completely avoided not only in solving for the eigenvalue problem but also in the calculation of the dynamic response. The analytical approaches for undamped gyroscopic system, non-classically damped system, including the damped gyroscopic system were unified. Very interesting and useful theoretical results, practical algorithms were obtained which are applicable to both non-defective and defective systems.展开更多
A set of thermodynamic descriptions of the temary compounds （mainly α-CulnSe2, δ-CulnSe2, Culn3Se5 and CulnsSe8） in the Cu-In-Se system was established by adopting sub-lattice model. The model parameters are caref...A set of thermodynamic descriptions of the temary compounds （mainly α-CulnSe2, δ-CulnSe2, Culn3Se5 and CulnsSe8） in the Cu-In-Se system was established by adopting sub-lattice model. The model parameters are carefully evaluated by integrating the experimental data of thermodynamic properties, phase equilibrium and theoretical calculation of formation energies of different point defects. The evaluated Gibbs energies of the compounds reasonably agree with that estimated from EMF experiment and ab initio calculation. The calculated phase relationships in the Cu-In-Se system are in accord with the experimental phase diagrams. The obtained standard enthalpy of formation of CulnSe2 is close to that reported in the literatures.展开更多
Due to the competition and high cost associated with die casting defects, it is urgent to adopt a rapid and effective method for defect analysis. In this research, a novel expert network approach was proposed to avoid...Due to the competition and high cost associated with die casting defects, it is urgent to adopt a rapid and effective method for defect analysis. In this research, a novel expert network approach was proposed to avoid some disadvantages of rule-based expert system. The main objective of the system is to assist die casting engineer in identifying defect, determining the probable causes of defect and proposing remedies to eliminate the defect. 14 common die casting defects could be identified quickly by expert system on the basis of their characteristics. BP neural network in combination with expert system was applied to map the complex relationship between causes and defects, and further explained the cause determination process. Cause determination gives due consideration to practical process conditions. Finally, corrective measures were recommended to eliminate the defect and implemented in the sequence of difficulty.展开更多
The morphology of double oxide film defects and their influence on the tensile mechanical properties of a commercial Cu-Al （C95800） alloy were investigated in this study. Plane castings were produced with two types ...The morphology of double oxide film defects and their influence on the tensile mechanical properties of a commercial Cu-Al （C95800） alloy were investigated in this study. Plane castings were produced with two types of pouting systems, and their tensile properties were measured and then analyzed by means of Weibull statistics method. The fracture surfaces of the tensile specimens were examined using scanning electron microscopy equipped with energy-dispersive spectroscopy. A large amount of double oxide film defects were observed on the tensile fractured specimens of the topfilled plane castings, and their chemical composition is identified to be Al2O3. Weibull statistics analyses showed that the double oxide film defects significantly reduce mechanical properties of the castings investigated. Furthermore, the ultimate tensile strength is more obviously deteriorated by double oxide film defects than elongation.展开更多
With more application of welding technology in important structures more attention was paid to the evaluation of the safety of welded structures, the life prediction and decision to repair the welded structures. Based...With more application of welding technology in important structures more attention was paid to the evaluation of the safety of welded structures, the life prediction and decision to repair the welded structures. Based on material fracture mechanism and Chinese standard of safety evaluations of pressure vessels, an expert system was developed to evaluate the safety of welded pressure vessels. The system can analyze the weld defects in a pressure vessel, convert different kinds of defects into equivalent cracks and obtain their equivalent sizes. Furthermore, the system can calculate the stress and strain in the positions of weld defects and make decision on whether the defects are tolerable or not according to the code. When it is tolerable, the system will calculate the safety margin. The fatigue life can be predicted if the defects undergo fatigue load too. Moreover, data bases are built for storing mechanical properties of material and evaluated results.展开更多
The central nervous system is a common site for congenital anomalies. Neural tube defects (NTDs) such as anencephaly, encephalocele and spina bifida are among the most common central nervous system congenital anomalie...The central nervous system is a common site for congenital anomalies. Neural tube defects (NTDs) such as anencephaly, encephalocele and spina bifida are among the most common central nervous system congenital anomalies. They result from failure of closure of the neural tube during embryonic development. The neural tube formation starts during the fourth week (22 - 23 days) after fertilization and fuses approximately between the days 25th and 27th. Most of NTDs result from genetic factors and environmental factors which are poorly understood. Diagnostic sonography can show a detailed visualization of the fetal intracranial anatomy such as the cerebral hemispheres, midbrain, thalami, and lateral ventricles. They also can measure the ratio between lateral ventricular and cerebral hemispheric width. It might show as well, the ratio between gestation, the rapid growth of the cerebral hemispheres and the expansion of the cerebral ventricles. The ultrasound during pregnancy plays a prominent and influential role in the prenatal evaluation of the central nervous system. It gives an excellent window for viewing and evaluating the fetal central nervous system during the second trimester through the lateral ventricles and transthalamic view, thus effectively contributing in the diagnosis and treatment of its congenital anomalies.展开更多
This study is to assess the prevalence rates spatial pattern of neural tube defects with geographic information system and spatial filtering technique. A total of 80 infants who diagnosed from neural tube defects in t...This study is to assess the prevalence rates spatial pattern of neural tube defects with geographic information system and spatial filtering technique. A total of 80 infants who diagnosed from neural tube defects in the area being studied between 1998 and 2001 were analyzed. Firstly, the geographic information system （GIS） software ArcGIS was used to map the crude prevalence rates. Secondly, the data were smoothed by the method of spatial filtering. We evaluated that the effect of changes in spatial filtering radius size was assessed by creating maps based on various filtering radius sizes. The 3 miles or larger filtering radius gives better section variability than the 2 and 2.5 miles or smaller ones. The maps produced by the spatial filtering technique indicate that prevalence rates in the villages in the southeastern region are to produce higher prevalence than that in the other regions. The smoothed maps based on Heshun County display a more adequate data representation than the raw prevalence rate map.展开更多
By making use of Duan-Ge＇s decomposition theory of gauge potential and the topological current theory proposed by Prof. Duan Yi-Shi, we study a two-component superfluid Bose condensed system, which is supposed to be ...By making use of Duan-Ge＇s decomposition theory of gauge potential and the topological current theory proposed by Prof. Duan Yi-Shi, we study a two-component superfluid Bose condensed system, which is supposed to be realized in the interior of neutron stars in the form of the coexistence of a neutron superfluid and a protonic superconductor. We propose that this system possesses vortex lines. The topological charges of the vortex lines are characterized by the Hopf indices and the Brower degrees of C-mapping.展开更多
文摘This study focuses on the bifurcation characteristics of the four degree-of- freedom gear system with local spalling defect to explore the spalling nonlinear dynamic mechanism. The dynamic model of the gear system with spalling defect, time-variant mesh stiffness, and nonlinear clearance is established to investigate the effect of spaUing defect on mesh stiffness and dynamic bifurcation. The primary resonance and internal resonance responses of the spalling model are analyzed by the averaging method, and the bifurcation characteristics with the evolvement of spall and internal excitation are studied by employing the singularity theory for the two-state variable system, which reveal the different bifurcation characteristics caused by the spalling defect. The results obtained herein can provide a theoretical basis to spalling fault diagnosis of gearbox.
文摘A rockbolt acting in the rock mass is subjected to the combined action of the pull-out load and confining pressure, and the bond quality of the rockbolt directly affects the stability of the roadway and cavern. Therefore, in this study, confining pressure and pull-out load are applied to grouted rockbolt systems with bond defects by a numerical simulation method, and the rockbolt is detected by ultrasonic guided waves to study the propagation law of ultrasonic guided waves in defective rockbolt systems and the bond quality of rockbolts under the combined action of pull-out load and confining pressure. The numerical simulation results show that the length and location of bond defects can be detected by ultrasonic guided waves under the combined action of pull-out load and confining pressure. Under no pull-out load, with increasing confining pressure, the low-frequency part of the guided wave frequency in the rockbolt increases, the high-frequency part decreases, the weakening effect of the confining pressure on the guided wave propagation law increases, and the bond quality of the rockbolt increases. The existence of defects cannot change the strengthening effect of the confining pressure on the guided wave propagation law under the same pull-out load or the weakening effect of the pull-out load on the guided wave propagation law under the same confining pressure.
文摘Entanglement due to the interaction of a two level atom with a laser and quantized field is investigated. The role of the nonlinearity due to these interactions is discussed. It is found that the nonlinearity changes strongly the behavior of the entanglement also the detuning parameters have important role in the structure of the measure of entanglement.
基金the National Science Foundation of Chinathe Doctoral Training of Education Committee of China
文摘This paper gives a dynamic decoupling approach for the analysis of large scale non-classically damped system, in which the complex variable computations were completely avoided not only in solving for the eigenvalue problem but also in the calculation of the dynamic response. The analytical approaches for undamped gyroscopic system, non-classically damped system, including the damped gyroscopic system were unified. Very interesting and useful theoretical results, practical algorithms were obtained which are applicable to both non-defective and defective systems.
文摘A set of thermodynamic descriptions of the temary compounds （mainly α-CulnSe2, δ-CulnSe2, Culn3Se5 and CulnsSe8） in the Cu-In-Se system was established by adopting sub-lattice model. The model parameters are carefully evaluated by integrating the experimental data of thermodynamic properties, phase equilibrium and theoretical calculation of formation energies of different point defects. The evaluated Gibbs energies of the compounds reasonably agree with that estimated from EMF experiment and ab initio calculation. The calculated phase relationships in the Cu-In-Se system are in accord with the experimental phase diagrams. The obtained standard enthalpy of formation of CulnSe2 is close to that reported in the literatures.
文摘Due to the competition and high cost associated with die casting defects, it is urgent to adopt a rapid and effective method for defect analysis. In this research, a novel expert network approach was proposed to avoid some disadvantages of rule-based expert system. The main objective of the system is to assist die casting engineer in identifying defect, determining the probable causes of defect and proposing remedies to eliminate the defect. 14 common die casting defects could be identified quickly by expert system on the basis of their characteristics. BP neural network in combination with expert system was applied to map the complex relationship between causes and defects, and further explained the cause determination process. Cause determination gives due consideration to practical process conditions. Finally, corrective measures were recommended to eliminate the defect and implemented in the sequence of difficulty.
文摘The morphology of double oxide film defects and their influence on the tensile mechanical properties of a commercial Cu-Al （C95800） alloy were investigated in this study. Plane castings were produced with two types of pouting systems, and their tensile properties were measured and then analyzed by means of Weibull statistics method. The fracture surfaces of the tensile specimens were examined using scanning electron microscopy equipped with energy-dispersive spectroscopy. A large amount of double oxide film defects were observed on the tensile fractured specimens of the topfilled plane castings, and their chemical composition is identified to be Al2O3. Weibull statistics analyses showed that the double oxide film defects significantly reduce mechanical properties of the castings investigated. Furthermore, the ultimate tensile strength is more obviously deteriorated by double oxide film defects than elongation.
基金The research is supported by China Postdoctoral Science Foundation （No. 20080430129 ） and National Key Technology R＆D Program （ No. 2007BAE07 B07 ）.
文摘With more application of welding technology in important structures more attention was paid to the evaluation of the safety of welded structures, the life prediction and decision to repair the welded structures. Based on material fracture mechanism and Chinese standard of safety evaluations of pressure vessels, an expert system was developed to evaluate the safety of welded pressure vessels. The system can analyze the weld defects in a pressure vessel, convert different kinds of defects into equivalent cracks and obtain their equivalent sizes. Furthermore, the system can calculate the stress and strain in the positions of weld defects and make decision on whether the defects are tolerable or not according to the code. When it is tolerable, the system will calculate the safety margin. The fatigue life can be predicted if the defects undergo fatigue load too. Moreover, data bases are built for storing mechanical properties of material and evaluated results.
文摘The central nervous system is a common site for congenital anomalies. Neural tube defects (NTDs) such as anencephaly, encephalocele and spina bifida are among the most common central nervous system congenital anomalies. They result from failure of closure of the neural tube during embryonic development. The neural tube formation starts during the fourth week (22 - 23 days) after fertilization and fuses approximately between the days 25th and 27th. Most of NTDs result from genetic factors and environmental factors which are poorly understood. Diagnostic sonography can show a detailed visualization of the fetal intracranial anatomy such as the cerebral hemispheres, midbrain, thalami, and lateral ventricles. They also can measure the ratio between lateral ventricular and cerebral hemispheric width. It might show as well, the ratio between gestation, the rapid growth of the cerebral hemispheres and the expansion of the cerebral ventricles. The ultrasound during pregnancy plays a prominent and influential role in the prenatal evaluation of the central nervous system. It gives an excellent window for viewing and evaluating the fetal central nervous system during the second trimester through the lateral ventricles and transthalamic view, thus effectively contributing in the diagnosis and treatment of its congenital anomalies.
基金Supported by the National Basic Reserch Program of China (973 Program) (2001CB5103)the National Natural Science Foundation of China (40471111 and 70571076).
文摘This study is to assess the prevalence rates spatial pattern of neural tube defects with geographic information system and spatial filtering technique. A total of 80 infants who diagnosed from neural tube defects in the area being studied between 1998 and 2001 were analyzed. Firstly, the geographic information system （GIS） software ArcGIS was used to map the crude prevalence rates. Secondly, the data were smoothed by the method of spatial filtering. We evaluated that the effect of changes in spatial filtering radius size was assessed by creating maps based on various filtering radius sizes. The 3 miles or larger filtering radius gives better section variability than the 2 and 2.5 miles or smaller ones. The maps produced by the spatial filtering technique indicate that prevalence rates in the villages in the southeastern region are to produce higher prevalence than that in the other regions. The smoothed maps based on Heshun County display a more adequate data representation than the raw prevalence rate map.
基金supported by the National Natural Science Foundation of China (Grant No 10275030)Cuiying Project of Lanzhou University (Grant No 225000-582404)
文摘By making use of Duan-Ge＇s decomposition theory of gauge potential and the topological current theory proposed by Prof. Duan Yi-Shi, we study a two-component superfluid Bose condensed system, which is supposed to be realized in the interior of neutron stars in the form of the coexistence of a neutron superfluid and a protonic superconductor. We propose that this system possesses vortex lines. The topological charges of the vortex lines are characterized by the Hopf indices and the Brower degrees of C-mapping.
