期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
Effect of scavenge port angles on flow distribution and performance of swirl-loop scavenging in 2-stroke aircraft diesel engine 被引量:5
1
作者 Zheng XU Fenzhu JI +4 位作者 Shuiting DING Yunhai ZHAO Yu ZHOU Qi ZHANG Farong DU 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2021年第3期105-117,共13页
Swirl-Loop Scavenging(SLS) improves the performance of 2-stroke aircraft diesel engine because the involved swirl may not only benefit the scavenging process, but also facilitate the fuel atomization and combustion. T... Swirl-Loop Scavenging(SLS) improves the performance of 2-stroke aircraft diesel engine because the involved swirl may not only benefit the scavenging process, but also facilitate the fuel atomization and combustion. The arrangement of scavenge port angles greatly influences incylinder flow distribution and swirl intensity, as well as the performance of the SLS engine. However, the mechanism of the effect and visualization experiment are rarely mentioned in the literature. To further investigate the SLS, Particle Image Velocimetry(PIV) experiment and Computational Fluid Dynamics(CFD) simulation are adopted to obtain its swirl distribution characteristics, and the effect of port angles on scavenging performance is discussed based on engine fired cycle simulation. The results illustrate that Reynolds Stress Turbulence model is accurate enough for in-cylinder flow simulation. Tangential and axial velocity distribution of the flow, as well as the scavenging performance, are mainly determined by geometric scavenge port angles ageom and βgeom . For reinforcement of scavenging on cross-sections and meridian planes, ageomvalue of27° and βgeom value of 60° are preferred, under which the scavenging efficiency reaches as high as 73.7%. Excessive swirl intensity has a negative effect on SLS performance, which should be controlled to a proper extent. 展开更多
关键词 2-Stroke Aircraft diesel engine Computational Fluid Dynamics(CFD) Particle Image Velocimetry(PIV) Scavenge port angles swirl-loop Scavenging(SLS)
原文传递
直拉单晶硅片“黑心”现象性质分析
2
作者 陈文浩 凌继贝 周浪 《人工晶体学报》 EI CAS CSCD 北大核心 2015年第2期348-353,共6页
对一种黑心片样品进行了分析。在确认黑心区为低少子寿命区的基础上,发现其电阻率明显偏高;发现黑心区经Secco刻蚀后,表面密布重叠圆形蚀坑,但与普通位错蚀坑有明显特征性区别;从其密度、形状与出现条件来看,它与电子半导体业中普遍报... 对一种黑心片样品进行了分析。在确认黑心区为低少子寿命区的基础上,发现其电阻率明显偏高;发现黑心区经Secco刻蚀后,表面密布重叠圆形蚀坑,但与普通位错蚀坑有明显特征性区别;从其密度、形状与出现条件来看,它与电子半导体业中普遍报告的氧化堆垛层错(OSF)也不一致;进一步发现黑心区经Sirtle刻蚀后,表面呈现典型的大小明显不同的两种漩涡缺陷蚀坑,其密度明显低于上述Secco蚀坑。根据所得结果推测:黑心区主要密布一种性质上与普通位错相近,而所造成晶格畸变特征与范围不同于普通位错的晶格缺陷,它不属于已知的OSF微缺陷,而可能是一种由结晶生长过程中过饱和氧沉淀诱发形成的位错环;此外,黑心区还含有少量漩涡缺陷。 展开更多
关键词 单晶硅 黑心 位错环 漩涡缺陷
在线阅读 下载PDF
IMPROVING SOLIDS SUSPENSION USING DEFLECTING BAFFLES IN GASLIFT LOOP REACTORS
3
作者 Luan Meilang Mao Zaisha +1 位作者 Wang Rong Chen Jiayong(Institute of Chemical Metallurgy, Academia Sinica, Beijing 100080) 《中国有色金属学会会刊:英文版》 CSCD 1996年第3期25-28,共4页
IMPROVINGSOLIDSSUSPENSIONUSINGDEFLECTINGBAFFLESINGASLIFTLOOPREACTORS¥LuanMeilang;MaoZaisha;WangRong;ChenJiay... IMPROVINGSOLIDSSUSPENSIONUSINGDEFLECTINGBAFFLESINGASLIFTLOOPREACTORS¥LuanMeilang;MaoZaisha;WangRong;ChenJiayong(InstituteofCh... 展开更多
关键词 LOOP REACTOR deflecting baffles swirling FLOW
在线阅读 下载PDF
紧耦合旋涡环缝式雾化器的初级液体雾化机理研究
4
作者 章敏 张召明 刘秋生 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2023年第8期9-24,共16页
为了初步探究紧耦合旋涡环缝式雾化器在真实条件下的液体雾化过程,本文在对旋涡环缝式雾化器气体单相流场特性分析的基础上对金属熔体破碎后形成的并不再继续破碎的雾化液滴在旋流场中的飞行轨迹进行基于离散相模型的数值模拟.研究结果... 为了初步探究紧耦合旋涡环缝式雾化器在真实条件下的液体雾化过程,本文在对旋涡环缝式雾化器气体单相流场特性分析的基础上对金属熔体破碎后形成的并不再继续破碎的雾化液滴在旋流场中的飞行轨迹进行基于离散相模型的数值模拟.研究结果表明:在雾化室内导液管前端中心孔液滴源位置处,自距气流场中心轴线距离越远的液滴源进入旋流场中的雾化液滴在导液管前端径向铺展范围越大.自雾化室内导液管前端中心孔液滴源进入旋流场中的雾化液滴其直径越大则在导液管前端沿径向铺展的范围越小.气流场中的回流区域和雾化液滴自身动能对雾化液滴在旋流场中的飞行轨迹有很大的影响,并且旋涡环缝式雾化器对金属熔体存在两种破碎模式,即波动破碎模式和膜状破碎模式.模拟结果可为旋涡环缝式雾化器在真实液体雾化过程中雾化模式的分类提供参考. 展开更多
关键词 液体雾化 破碎模式 雾化器 雾化室 离散相模型 金属熔体 气流场 雾化液滴
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部