This paper studies the microstructure variation induced by super-absorbent polymer(SAP)to understand the mechanism of macroscopic strength improvement of stabilized soil.The fabric changes of cement elime stabilized s...This paper studies the microstructure variation induced by super-absorbent polymer(SAP)to understand the mechanism of macroscopic strength improvement of stabilized soil.The fabric changes of cement elime stabilized soil were analyzed with respect to the variation of SAP content,water content,lime content and curing time,using mercury intrusion porosimetry(MIP)tests.It can be observed that the delimitation pore diameter between inter-and intra-aggregate pores was 0.2 mm for the studied soil,determined through the intrusion/extrusion cycles.Experimental results showed that fabric in both inter-and intra-aggregate pores varied significantly with SAP content,lime content,water content and curing time.Two main changes in fabric due to SAP are identified as:(1)an increase in intra-aggregate pores(<0.2 mm)due to the closer soilecementelime cluster space at higher SAP content;and(2)a decrease in inter-aggregate pores represented by a reduction in small-pores(0.2e2 mm)due to the lower pore volume of soil mixture after water absorption by SAP,and a slight increase in large-pores(>2 mm)due to the shrinkage of SAP particle during the freezeedry process of MIP test.Accordingly,the strength gain due to SAP for cementelime stabilized soil was mainly due to a denser fabric with less interaggregate pores.The cementitious products gradually developed over time,leading to an increase in intra-aggregate pores with an increasing proportion of micro-pores(0.006e0.2 mm).Meanwhile,the inter-aggregate pores were filled by cementitious products,resulting in a decrease in total void ratio.Hence,the strength development over time is attributable to the enhancement of cementation bonding and the refinement of fabric due to the increasing cementitious compounds.展开更多
A super-absorbent polymer is prepared by graft polymerizing acrylamide (AM) onto potato starch using eerie ammonium nitrate (CAN) and N, N'-methylene-bis-acrylamide (bisAM) as an initiator and cross-linking agent ...A super-absorbent polymer is prepared by graft polymerizing acrylamide (AM) onto potato starch using eerie ammonium nitrate (CAN) and N, N'-methylene-bis-acrylamide (bisAM) as an initiator and cross-linking agent respectively, and then subjecting the potato starch- poly(acrylamide) (PAM) graft copolymer (SPAM) to alkaline saponification. The water absorbency (WA) of the sample is nearly 5000 g H2O/g for dry sample in 24 h at room temperature and is far larger than that of reported in the literature([1]). The variables affecting the WA were investigated and optimiz;ed, they were: concentrations of potato starch, AM, CAN and bisAM were 26.3 g/L, 1.14 mol/L, 10.3 mmol/L and 0.53 mmol/L, respectively. The amount of sodium hydroxide was 15 g and the temperatures of graft copolymerization and saponification reactions were 60 degrees C and 95 degrees C. The time of graft copolymerization and saponification reactions was 2 h, respectively.展开更多
Super-absorbent polymers(SAPs)are widely used chemical water-saving materials,which play an active role in the accumulation of soil water and the improvement of soil structure.Little is known about their performance w...Super-absorbent polymers(SAPs)are widely used chemical water-saving materials,which play an active role in the accumulation of soil water and the improvement of soil structure.Little is known about their performance with repeated usage or about factors influencing their efficiency under alternate wetting and drying cycles.In this study,various concentrations of SAP(0,0.1,0.2 and 0.3%)in soil following three continuous wetting and drying cycles(T1,T2 and T3),were studied to determine effects on soil structure stability and hydro-physical properties.The results indicated that the SAP improved soil water supply capacity under conditions of mild drought(T2)and sufficient irrigation(T3)at concentrations of 0.2 and 0.3%,but a reduction was observed under severe drought conditions(T1),which was negatively correlated with the SAP concentration.The physical adsorption of the SAP by soil and the chemical connection between the SAP and soil mineral colloids as Si-O-Si bonds,-OH bonds and different crystalline silica were the important factors that directly lead to the reduction of water retention capacities of the SAP with alternating wet and dry conditions.Compared with the control,the soil liquid phase ratios of the SAP treatments were increased by8.8-202.7%in the T1 and T2 cycles,which would have led to a decrease in the soil air phase ratios.After repeated wetting and drying cycles,the SAP treatments increased the amount of>0.25 mm soil aggregates and the contents of water-stable macro-aggregate(R_(0.25)),and decreased the amount of<0.053 mm soil aggregates,especially with higher concentrations of the SAP.Increases in mean weight diameter(MWD)and geometric mean diameter(GMD),and declines in fractal dimension(D)and unstable aggregates index(E_(LT))were all observed with the SAP treatments,which indicated an improvement in soil stability and structure.It was concluded that the distribution and stability of soil aggregates and soil water supply capacity was closely related to SAP concentration,soil moisture condition and the interaction between the SAP and soil particles.展开更多
Under solvothermal conditions,1,4‑naphthalenedicarboxylic acid(H_(2)ndc)and 9,9′‑dihexyl‑2,7‑di(pyridin‑4‑yl)fluorene(hfdp)reacted with Co^(2+)ions and Cd^(2+)ions to form two coordination polymers,[Co(hfdp)(ndc)(H2O...Under solvothermal conditions,1,4‑naphthalenedicarboxylic acid(H_(2)ndc)and 9,9′‑dihexyl‑2,7‑di(pyridin‑4‑yl)fluorene(hfdp)reacted with Co^(2+)ions and Cd^(2+)ions to form two coordination polymers,[Co(hfdp)(ndc)(H2O)]·DMA}n(1)and{[Cd(hfdp)(ndc)(H_(2)O)]·DMA}_(n)(2),respectively(DMA=N,N‑dimethylacetamide).Single‑crystal X‑ray diffraction analyses showed that both complexes 1 and 2 contain similar structures.Topological analysis indicates that complexes 1 and 2 have a{44·62}planar structure.In addition,both complexes reveal good thermal stability and fluorescence sensing performance.They exhibited good sensitivity and selectivity towards 2,4,6‑trinitrophenol(TNP)by fluorescent quenching.The limits of detection of 1 and 2 for TNP were 0.107 and 0.327μmol·L^(-1),respectively.CCDC:2475515,1;2475516,2.展开更多
Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynam...Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynamic size and slower degradation.It is key to develop facile methods to large-scale synthesis of polymer rings with tunable compositions and microstructures.Recent progresses in large-scale synthesis of polymer rings against single-chain dynamic nanoparticles,and the example applications in synchronous enhancing toughness and strength of polymer nanocomposites are summarized.Once there is the breakthrough in rational design and effective large-scale synthesis of polymer rings and their functional derivatives,a family of cyclic functional hybrids would be available,thus providing a new paradigm in developing polymer science and engineering.展开更多
Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)...Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)owing to its excellent hydrophilicity and swelling capacity.However,calcium bentonite(CaB),which is much more abundant worldwide,is rarely used for containment applications owing to its poor hydrophilicity.This study proposed a polymerization method that transforms sodium-activated calcium bentonite(NCB)into PMB to achieve low hydraulic conductivity(k)to aggressive liquids.The mechanism for its low k was revealed through characterization techniques and analyses(e.g.X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and Brunauer-Emmett-Teller(BET)).The results showed that the PMB had a small amount of polymer elution(indicating better interface stability)and thus exhibited excellent barrier properties under chemically aggressive conditions,with the k of<10^(-11) m/s for 0.6 mol/L NaCl solution,which is four orders of magnitude lower than that of the NCB(k=3×10^(-7) m/s).Various microscopic analyses indicated that the selected monomers were successfully polymerized,and intercalated into and grafted onto the montmorillonite layers of bentonite.The formed polymer network increased the swelling capability of PMB granules,decreased the pore size,and created narrow and tortuous flow pathways leading to a very low k to aggressive liquids.展开更多
Liver is a vital organ in the human body and plays a central role in the metabolism and detoxification of endotoxins and exotoxins.Bilirubin is an endotoxin derived from hemoglobin(Hb).Removing excess bilirubin in the...Liver is a vital organ in the human body and plays a central role in the metabolism and detoxification of endotoxins and exotoxins.Bilirubin is an endotoxin derived from hemoglobin(Hb).Removing excess bilirubin in the blood is crucial for the treatment of liver diseases.Hemoperfusion,which relies on adsorbents to efficiently adsorb toxins,is a widely applied procedure for the removal of blood toxins.To broaden and improve the range and performance of hemoperfusion adsorbents,we synthesized cationic hyper crosslinked polymers(HCPs)with strong affinity for bilirubin.This material exhibited outstanding adsorption performance,with a maximum adsorption capacity of 934 mg/g and a removal efficiency of 96%.Further investigation confirmed their excellent selectivity,reusability,and biocompatibility.These findings expand the potential applications of HCPs and provide insight into strategies for constructing promising hemoperfusion adsorbent materials.展开更多
With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial c...With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial component of electrochromic devices(ECDs),show great promise in applications.This is attributed to their efficient ion-transport capabilities,excellent mechanical properties and strong adhesion.All of these characteristics are conducive to enhancing the safety of the devices,streamlining the packaging process,significantly improving the electrochromic performance of ECDs and boosting their commercial application potential.This review provides a comprehensive overview of GPEs for ECDs,focusing on their basic designs,functional modifications and practical applications.Firstly,this review outlines the fundamental design of GPEs for ECDs,encompassing key performance index,classification,gelation mechanism and preparation methods.Building on this foundation,it provides an in-depth discussion of functionalized GPEs developed to enhance device performance or expand functionality,including electrochromic,temperature-responsive,photo-responsive and stretchable self-healing GPE.Furthermore,the integration of GPEs into various ECD applications,including smart windows,displays,energy storage devices and wearable electronic,are summarized to highlight the advantages that the design of GPEs brings to the practical application of ECDs.Finally,based on the summary of GPEs employed for ECDs,the challenges and development expectations in this direction were indicated.展开更多
Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimen...Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimensional optimization strategy to alleviate the side reactions between SN and Li metal,and develop a highly stable poly-vinylethylene carbonate-based PPCE(PPCE-VEC).Moreover,we identify the intrinsic factors of multi-dimensional polymer structures on the electrolyte stability by three typical classes of polyesters.The PPCE-VEC constructed by in situ polymerization exhibits much better stability than poly-vinylene carbonate-based PPCE(PPCE-VCA)and poly-trifluoroethyl acrylate-based PPCE(PPCE-TFA),which is verified by its fewer SN-decomposition species in X-ray photoelectron spectroscopy(XPS)and outstanding full cell performance.The PPCE-VEC-enabled LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)full cell achieve 73.7%capacity retention after 1400 cycles,which outperforms PPCE-VCA-and PPCE-TFA-enabled full cells(61.9%and 46.9%).Spectral analysis and theoretical calculation reveal that the high solvation ability of the carbonyl site,flexible polymer chain,and homogeneous electrolyte phase of PPCE-VEC are favorable to maximizing competition coordination with Li^(+)to weaken the Li^(+)–SN binding and shape an anion-rich solvation structure.This optimized polymer-involved Li^(+)solvation enhances SN stability and facilitates the formation of B/F enriched solid-electrolyte interphase(SEI),thus significantly improving PPCE stability.展开更多
Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2...Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.展开更多
To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polym...To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.展开更多
Thermoelectric(TE)materials,being capable of converting waste heat into electricity,are pivotal for sustainable energy solutions.Among emerging TE materials,organic TE materials,particularly conjugated polymers,are ga...Thermoelectric(TE)materials,being capable of converting waste heat into electricity,are pivotal for sustainable energy solutions.Among emerging TE materials,organic TE materials,particularly conjugated polymers,are gaining prominence due to their unique combination of mechanical flexibility,environmental compatibility,and solution-processable fabrication.A notable candidate in this field is poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene)(PBTTT),a liquid-crystalline conjugated polymer,with high charge carrier mobility and adaptability to melt-processing techniques.Recent advancements have propelled PBTTT’s figure of merit from below 0.1 to a remarkable 1.28 at 368 K,showcasing its potential for practical applications.This review systematically examines strategies to enhance PBTTT’s TE performance through doping(solution,vapor,and anion exchange doping),composite engineering,and aggregation state controlling.Recent key breakthroughs include ion exchange doping for stable charge modulation,multi-heterojunction architectures reducing thermal conductivity,and proton-coupled electron transfer doping for precise Fermi-level tuning.Despite great progress,challenges still persist in enhancing TE conversion efficiency,balancing or decoupling electrical conductivity,Seebeck coefficient and thermal conductivity,and leveraging melt-processing scalability of PBTTT.By bridging fundamental insights with applied research,this work provides a roadmap for advancing PBTTT-based TE materials toward efficient energy harvesting and wearable electronics.展开更多
Shear stress overshoot in entangled polymer rheology is a hallmark of transient dynamics,but its microscopic origin remains under debate.Using molecular dynamics simulations,we investigate a two-step shear protocol co...Shear stress overshoot in entangled polymer rheology is a hallmark of transient dynamics,but its microscopic origin remains under debate.Using molecular dynamics simulations,we investigate a two-step shear protocol consisting of successive startup shears separated by a waiting period,with the first shear interrupted before the overshoot.In the homogeneous flow,the GLaMM theory captures the stress response during the first shear,but fails to reproduce the nonmonotonic dependence of the second stress overshoot(σ_(2max))on the waiting time.Contrary to the prediction of a nonmonotonic normal stress component σ_(yy)during the waiting period,our simulations show that σ_(yy),like the tube segment orientation(S_(xy)),the contour length of the primitive chain(L),and the entanglement number per chain(Z),relaxes monotonically toward equilibrium.At the strain corresponding to σ_(2max),both the tube segment orientation and the entanglement number per chain exhibit a nonmonotonic dependence on the waiting time that closely mirrors the behavior of σ_(2max),indicating that both factors play significant roles in governing(σ_(2max).Our findings are consistent with the interpretation of lanniruberto and Ma rrucci[ACS Macro.Lett.2014,3,552]for orientation effects and with the viewpoint of Wang et al.[Macromolecules 2013,46,3147]for entanglement effects,although the two explanations are rooted in distinct physical pictu res.These results provide new insights into the stress responses of entanglement polymer fluids and underscore the need for a more unified theoretical framework.展开更多
To investigate the pore structure of graphene oxide modified polymer cement mortar(GOPM)under salt-freeze-thaw(SFT)coupling effects and its impact on deterioration,this study modifies polymer cement mortar(EMCM)with g...To investigate the pore structure of graphene oxide modified polymer cement mortar(GOPM)under salt-freeze-thaw(SFT)coupling effects and its impact on deterioration,this study modifies polymer cement mortar(EMCM)with graphene oxide(GO).The micro-pore structure of GOPM is characterized using LF-NMR and SEM.Fractal theory is applied to calculate the fractal dimension of pore volume,and the deterioration patterns are analyzed based on the evolution characteristics of capillary pores.The experimental results indicate that,after 25 salt-freeze-thaw cycles(SFTc),SO2-4 ions penetrate the matrix,generating corrosion products that fill existing pores and enhance the compactness of the specimen.As the number of cycles increases,the ongoing formation and expansion of corrosion products within the matrix,combined with persistent freezing forces,and result in the degradation of the pore structure.Therefore,the mass loss rate(MLR)of the specimens shows a trend of first decreasing and then increasing,while the relative dynamic elastic modulus(RDEM)initially increases and then decreases.Compared to the PC group specimens,the G3PM group specimens show a 28.71% reduction in MLR and a 31.42% increase in RDEM after 150 SFTc.The fractal dimensions of the transition pores,capillary pores,and macropores in the G3PM specimens first increase and then decrease as the number of SFTc increases.Among them,the capillary pores show the highest correlation with MLR and RDEM,with correlation coefficients of 0.97438 and 0.98555,respectively.展开更多
Acceptorless dehydrogenative coupling of pyridinemethanol with ketones is one of the most reliable methodologies to access functionalized 1,8-naphthyridine derivatives.However,it is challenging to develop environmenta...Acceptorless dehydrogenative coupling of pyridinemethanol with ketones is one of the most reliable methodologies to access functionalized 1,8-naphthyridine derivatives.However,it is challenging to develop environmentally friendly catalytic systems,especially in constructing efficient and recyclable catalysts under water or solvent-free conditions.Here,we designed two novel coordination polymers Cd-CPs and Fe-CPs to investigate their catalytic performance in water.Gratifyingly,it was observed that Cd-CPs as a multifunctional catalyst was successfully applied to establish a universal pathway for direct fabrication of 1,8-naphthyridine derivatives under water conditions,while it was effective for the synthesis of1,3,5-triazines through acceptorless dehydrogenative coupling strategies.The features of broad substrate,high atom efficiency,and good catalyst reusability highlight the feasibility of this transformation.In additional,we demonstrated the spindle-like structures Fe-P,derived from the Fe-CPs via phosphorylation,which can be used as an efficient electrocatalyst for oxygen evolution reaction with good stability.This work provides two highly efficient non-noble metal catalysts for functionalized 1,8-naphthyridine derivatives production and oxygen evolution reaction,and opens a new avenue to further fabricate diverse metal catalysts with high catalytic performance in water.展开更多
Polymer matrix composites with high dielectric constants and low dielectric losses are in high demand for flexible electronics.However,simultaneously satisfying these requirements poses a significant scientific challe...Polymer matrix composites with high dielectric constants and low dielectric losses are in high demand for flexible electronics.However,simultaneously satisfying these requirements poses a significant scientific challenge owing to the intrinsic trade-off relationship.Herein,we utilized the in situ controllable reduction of graphene oxide(GO)within a poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene)(P(VDF-Tr FE-CFE))matrix to regulate the dielectric properties.The as-obtained composite exhibited a high relative dielectric constant of 1415coupled with a low loss tangent of 0.380 at 100 Hz.Experimental and theoretical studies indicate that the increased degree of electron conjugation and conductivity of the reduced GO(RGO)are responsible for the high-k.The constrained reduction degree of GO,combined with its homogeneous dispersion in the polymer matrix,effectively suppresses long-range charge carrier migration,thereby minimizing dielectric loss.This novel strategy could be successfully applied to both organic and aqueous systems.Furthermore,a high-performance flexible capacitive proximity sensor was exemplified by the optimization of both the dielectric layer and electrode pattern,exhibiting excellent sensitivity and stability.The fundamental mechanisms elucidated in this study provide crucial design principles for developing dielectric PMCs with tailored properties,thereby opening new avenues for advanced flexible electronic applications.展开更多
Bone regeneration for non-load-bearing defects remains a significant clinical challenge requiring advanced biomaterials and cellular strategies.Adiposederived mesenchymal stem cells(AD-MSCs)have garnered significant i...Bone regeneration for non-load-bearing defects remains a significant clinical challenge requiring advanced biomaterials and cellular strategies.Adiposederived mesenchymal stem cells(AD-MSCs)have garnered significant interest in bone tissue engineering(BTE)because of their abundant availability,minimally invasive harvesting procedures,and robust differentiation potential into osteogenic lineages.Unlike bone marrow-derived mesenchymal stem cells,AD-MSCs can be easily obtained in large quantities,making them appealing alternatives for therapeutic applications.This review explores hydrogels containing polymers,such as chitosan,collagen,gelatin,and hyaluronic acid,and their composites,tailored for BTE,and emphasizes the importance of these hydrogels as scaffolds for the delivery of AD-MSCs.Various hydrogel fabrication techniques and biocompatibility assessments are discussed,along with innovative modifications to enhance osteogenesis.This review also briefly outlines AD-MSC isolation methods and advanced embedding techniques for precise cell placement,such as direct encapsulation and three-dimensional bioprinting.We discuss the mechanisms of bone regeneration in the AD-MSC-laden hydrogels,including osteoinduction,vascularization,and extracellular matrix remodeling.We also review the preclinical and clinical applications of AD-MSC-hydrogel systems,emphasizing their success and limitations.In this review,we provide a comprehensive overview of AD-MSC-based hydrogel systems to guide the development of effective therapies for bone regeneration.展开更多
We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by&quo...We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.展开更多
Composite polymer electrolytes(CPEs)offer a promising solution for all-solid-state lithium-metal batteries(ASSLMBs).However,conventional nanofillers with Lewis-acid-base surfaces make limited contribution to improving...Composite polymer electrolytes(CPEs)offer a promising solution for all-solid-state lithium-metal batteries(ASSLMBs).However,conventional nanofillers with Lewis-acid-base surfaces make limited contribution to improving the overall performance of CPEs due to their difficulty in achieving robust electrochemical and mechanical interfaces simultaneously.Here,by regulating the surface charge characteristics of halloysite nanotube(HNT),we propose a concept of lithium-ion dynamic interface(Li^(+)-DI)engineering in nano-charged CPE(NCCPE).Results show that the surface charge characteristics of HNTs fundamentally change the Li^(+)-DI,and thereof the mechanical and ion-conduction behaviors of the NCCPEs.Particularly,the HNTs with positively charged surface(HNTs+)lead to a higher Li^(+)transference number(0.86)than that of HNTs-(0.73),but a lower toughness(102.13 MJ m^(-3)for HNTs+and 159.69 MJ m^(-3)for HNTs-).Meanwhile,a strong interface compatibilization effect by Li^(+)is observed for especially the HNTs+-involved Li^(+)-DI,which improves the toughness by 2000%compared with the control.Moreover,HNTs+are more effective to weaken the Li^(+)-solvation strength and facilitate the formation of Li F-rich solid-electrolyte interphase of Li metal compared to HNTs-.The resultant Li|NCCPE|LiFePO4cell delivers a capacity of 144.9 m Ah g^(-1)after 400 cycles at 0.5 C and a capacity retention of 78.6%.This study provides deep insights into understanding the roles of surface charges of nanofillers in regulating the mechanical and electrochemical interfaces in ASSLMBs.展开更多
Grouting is the most commonly used method to control water inrush in underground engineering.Traditional cement-based materials are easy to dilute and hard to coagulate under the influence of large flow and high-veloc...Grouting is the most commonly used method to control water inrush in underground engineering.Traditional cement-based materials are easy to dilute and hard to coagulate under the influence of large flow and high-velocity water inrush.To address these deficiencies,a new type of polymer grouting material with an excellent expansion ratio was synthesised.The material quickly absorbs water and has an expansion ratio of 1:300.The material is composed of a superabsorbent polymer(SAP),glycerol,and ethanol.The effects of water quality on the expansion ratio and expansion rate of the material were examined,and the best solid–liquid ratio for the slurry was determined by fluidity measurements.A karst specially designed pipeline water inrush test device showed that 800 g of SAP can achieve 0.6 m/s water flow blockage in the smooth pipeline,demonstrating that the ability of the SAP slurry to block water inrush is superior to those of other materials.This study provides a reference for water inrush plugging,and has important implications for the reduction and control of karst pipeline-type water inrush disasters,ensuring the safety of construction sites and preventing loss of life and damage to property.展开更多
基金the China Postdoctoral Science Foundation(Grant Nos.2016M600396 and 2017T100355)the Fundamental Research Funds for the Central Universities of China(Grant No.B200204001)Jiangsu Natural Resources Science and Technology Fund(Grant No.KJXM2019025)are also acknowledged.
文摘This paper studies the microstructure variation induced by super-absorbent polymer(SAP)to understand the mechanism of macroscopic strength improvement of stabilized soil.The fabric changes of cement elime stabilized soil were analyzed with respect to the variation of SAP content,water content,lime content and curing time,using mercury intrusion porosimetry(MIP)tests.It can be observed that the delimitation pore diameter between inter-and intra-aggregate pores was 0.2 mm for the studied soil,determined through the intrusion/extrusion cycles.Experimental results showed that fabric in both inter-and intra-aggregate pores varied significantly with SAP content,lime content,water content and curing time.Two main changes in fabric due to SAP are identified as:(1)an increase in intra-aggregate pores(<0.2 mm)due to the closer soilecementelime cluster space at higher SAP content;and(2)a decrease in inter-aggregate pores represented by a reduction in small-pores(0.2e2 mm)due to the lower pore volume of soil mixture after water absorption by SAP,and a slight increase in large-pores(>2 mm)due to the shrinkage of SAP particle during the freezeedry process of MIP test.Accordingly,the strength gain due to SAP for cementelime stabilized soil was mainly due to a denser fabric with less interaggregate pores.The cementitious products gradually developed over time,leading to an increase in intra-aggregate pores with an increasing proportion of micro-pores(0.006e0.2 mm).Meanwhile,the inter-aggregate pores were filled by cementitious products,resulting in a decrease in total void ratio.Hence,the strength development over time is attributable to the enhancement of cementation bonding and the refinement of fabric due to the increasing cementitious compounds.
文摘A super-absorbent polymer is prepared by graft polymerizing acrylamide (AM) onto potato starch using eerie ammonium nitrate (CAN) and N, N'-methylene-bis-acrylamide (bisAM) as an initiator and cross-linking agent respectively, and then subjecting the potato starch- poly(acrylamide) (PAM) graft copolymer (SPAM) to alkaline saponification. The water absorbency (WA) of the sample is nearly 5000 g H2O/g for dry sample in 24 h at room temperature and is far larger than that of reported in the literature([1]). The variables affecting the WA were investigated and optimiz;ed, they were: concentrations of potato starch, AM, CAN and bisAM were 26.3 g/L, 1.14 mol/L, 10.3 mmol/L and 0.53 mmol/L, respectively. The amount of sodium hydroxide was 15 g and the temperatures of graft copolymerization and saponification reactions were 60 degrees C and 95 degrees C. The time of graft copolymerization and saponification reactions was 2 h, respectively.
基金supported by the National Natural Science Foundation of China(41601226)the Agricultural Science and Technology Innovation Project of the Chinese Academy of Agricultural Sciences。
文摘Super-absorbent polymers(SAPs)are widely used chemical water-saving materials,which play an active role in the accumulation of soil water and the improvement of soil structure.Little is known about their performance with repeated usage or about factors influencing their efficiency under alternate wetting and drying cycles.In this study,various concentrations of SAP(0,0.1,0.2 and 0.3%)in soil following three continuous wetting and drying cycles(T1,T2 and T3),were studied to determine effects on soil structure stability and hydro-physical properties.The results indicated that the SAP improved soil water supply capacity under conditions of mild drought(T2)and sufficient irrigation(T3)at concentrations of 0.2 and 0.3%,but a reduction was observed under severe drought conditions(T1),which was negatively correlated with the SAP concentration.The physical adsorption of the SAP by soil and the chemical connection between the SAP and soil mineral colloids as Si-O-Si bonds,-OH bonds and different crystalline silica were the important factors that directly lead to the reduction of water retention capacities of the SAP with alternating wet and dry conditions.Compared with the control,the soil liquid phase ratios of the SAP treatments were increased by8.8-202.7%in the T1 and T2 cycles,which would have led to a decrease in the soil air phase ratios.After repeated wetting and drying cycles,the SAP treatments increased the amount of>0.25 mm soil aggregates and the contents of water-stable macro-aggregate(R_(0.25)),and decreased the amount of<0.053 mm soil aggregates,especially with higher concentrations of the SAP.Increases in mean weight diameter(MWD)and geometric mean diameter(GMD),and declines in fractal dimension(D)and unstable aggregates index(E_(LT))were all observed with the SAP treatments,which indicated an improvement in soil stability and structure.It was concluded that the distribution and stability of soil aggregates and soil water supply capacity was closely related to SAP concentration,soil moisture condition and the interaction between the SAP and soil particles.
文摘Under solvothermal conditions,1,4‑naphthalenedicarboxylic acid(H_(2)ndc)and 9,9′‑dihexyl‑2,7‑di(pyridin‑4‑yl)fluorene(hfdp)reacted with Co^(2+)ions and Cd^(2+)ions to form two coordination polymers,[Co(hfdp)(ndc)(H2O)]·DMA}n(1)and{[Cd(hfdp)(ndc)(H_(2)O)]·DMA}_(n)(2),respectively(DMA=N,N‑dimethylacetamide).Single‑crystal X‑ray diffraction analyses showed that both complexes 1 and 2 contain similar structures.Topological analysis indicates that complexes 1 and 2 have a{44·62}planar structure.In addition,both complexes reveal good thermal stability and fluorescence sensing performance.They exhibited good sensitivity and selectivity towards 2,4,6‑trinitrophenol(TNP)by fluorescent quenching.The limits of detection of 1 and 2 for TNP were 0.107 and 0.327μmol·L^(-1),respectively.CCDC:2475515,1;2475516,2.
基金Supported by the National Natural Science Foundation of China(Nos.52293472,22473096 and 22471164)。
文摘Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynamic size and slower degradation.It is key to develop facile methods to large-scale synthesis of polymer rings with tunable compositions and microstructures.Recent progresses in large-scale synthesis of polymer rings against single-chain dynamic nanoparticles,and the example applications in synchronous enhancing toughness and strength of polymer nanocomposites are summarized.Once there is the breakthrough in rational design and effective large-scale synthesis of polymer rings and their functional derivatives,a family of cyclic functional hybrids would be available,thus providing a new paradigm in developing polymer science and engineering.
基金supported by the National Natural Science Foundation of China(Grant Nos.52478351,52208329)the Shenzhen Science and Technology Innovation Commission(Grant No.JCYJ20240813143306009)support is gratefully acknowledged.
文摘Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)owing to its excellent hydrophilicity and swelling capacity.However,calcium bentonite(CaB),which is much more abundant worldwide,is rarely used for containment applications owing to its poor hydrophilicity.This study proposed a polymerization method that transforms sodium-activated calcium bentonite(NCB)into PMB to achieve low hydraulic conductivity(k)to aggressive liquids.The mechanism for its low k was revealed through characterization techniques and analyses(e.g.X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and Brunauer-Emmett-Teller(BET)).The results showed that the PMB had a small amount of polymer elution(indicating better interface stability)and thus exhibited excellent barrier properties under chemically aggressive conditions,with the k of<10^(-11) m/s for 0.6 mol/L NaCl solution,which is four orders of magnitude lower than that of the NCB(k=3×10^(-7) m/s).Various microscopic analyses indicated that the selected monomers were successfully polymerized,and intercalated into and grafted onto the montmorillonite layers of bentonite.The formed polymer network increased the swelling capability of PMB granules,decreased the pore size,and created narrow and tortuous flow pathways leading to a very low k to aggressive liquids.
基金financially supported by the International Cooperation Program of the Ministry of Science and Technology of Hubei Province(No.2023EHA069)Shenzhen Science and Technology Program(No.JCYJ20230807143702005)the National Foreign Experts Program(No.G2022027015L)。
文摘Liver is a vital organ in the human body and plays a central role in the metabolism and detoxification of endotoxins and exotoxins.Bilirubin is an endotoxin derived from hemoglobin(Hb).Removing excess bilirubin in the blood is crucial for the treatment of liver diseases.Hemoperfusion,which relies on adsorbents to efficiently adsorb toxins,is a widely applied procedure for the removal of blood toxins.To broaden and improve the range and performance of hemoperfusion adsorbents,we synthesized cationic hyper crosslinked polymers(HCPs)with strong affinity for bilirubin.This material exhibited outstanding adsorption performance,with a maximum adsorption capacity of 934 mg/g and a removal efficiency of 96%.Further investigation confirmed their excellent selectivity,reusability,and biocompatibility.These findings expand the potential applications of HCPs and provide insight into strategies for constructing promising hemoperfusion adsorbent materials.
基金supported by the National Natural Science Foundation of China(52103299)。
文摘With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial component of electrochromic devices(ECDs),show great promise in applications.This is attributed to their efficient ion-transport capabilities,excellent mechanical properties and strong adhesion.All of these characteristics are conducive to enhancing the safety of the devices,streamlining the packaging process,significantly improving the electrochromic performance of ECDs and boosting their commercial application potential.This review provides a comprehensive overview of GPEs for ECDs,focusing on their basic designs,functional modifications and practical applications.Firstly,this review outlines the fundamental design of GPEs for ECDs,encompassing key performance index,classification,gelation mechanism and preparation methods.Building on this foundation,it provides an in-depth discussion of functionalized GPEs developed to enhance device performance or expand functionality,including electrochromic,temperature-responsive,photo-responsive and stretchable self-healing GPE.Furthermore,the integration of GPEs into various ECD applications,including smart windows,displays,energy storage devices and wearable electronic,are summarized to highlight the advantages that the design of GPEs brings to the practical application of ECDs.Finally,based on the summary of GPEs employed for ECDs,the challenges and development expectations in this direction were indicated.
基金supported by the National Natural Science Foundation of China(22072048)the Guangdong Provincial Department of Science and Technology(2021A1515010128 and 2022A0505050013).
文摘Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimensional optimization strategy to alleviate the side reactions between SN and Li metal,and develop a highly stable poly-vinylethylene carbonate-based PPCE(PPCE-VEC).Moreover,we identify the intrinsic factors of multi-dimensional polymer structures on the electrolyte stability by three typical classes of polyesters.The PPCE-VEC constructed by in situ polymerization exhibits much better stability than poly-vinylene carbonate-based PPCE(PPCE-VCA)and poly-trifluoroethyl acrylate-based PPCE(PPCE-TFA),which is verified by its fewer SN-decomposition species in X-ray photoelectron spectroscopy(XPS)and outstanding full cell performance.The PPCE-VEC-enabled LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)full cell achieve 73.7%capacity retention after 1400 cycles,which outperforms PPCE-VCA-and PPCE-TFA-enabled full cells(61.9%and 46.9%).Spectral analysis and theoretical calculation reveal that the high solvation ability of the carbonyl site,flexible polymer chain,and homogeneous electrolyte phase of PPCE-VEC are favorable to maximizing competition coordination with Li^(+)to weaken the Li^(+)–SN binding and shape an anion-rich solvation structure.This optimized polymer-involved Li^(+)solvation enhances SN stability and facilitates the formation of B/F enriched solid-electrolyte interphase(SEI),thus significantly improving PPCE stability.
文摘Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.
基金the support from the Jiangsu Provincial Senior Talent Program (Dengfeng,Jiangsu University)the support from the National Key R&D Program of China (No.2024YFB3612600)+3 种基金the National Natural Science Foundation of China (Nos.22275098,62288102)Basic Research Program of Jiangsu (No.BK20243057)the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications (No.NY222097)the National Natural Science Foundation of China (No.62205035)。
文摘To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.
基金financial support by Guangdong Basic and Applied Basic Research Foundation(2025A1515012415)National Natural Science Foundation of China(52242305)the Stable Support Project of Shenzhen(Project No.20231122125728001).
文摘Thermoelectric(TE)materials,being capable of converting waste heat into electricity,are pivotal for sustainable energy solutions.Among emerging TE materials,organic TE materials,particularly conjugated polymers,are gaining prominence due to their unique combination of mechanical flexibility,environmental compatibility,and solution-processable fabrication.A notable candidate in this field is poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene)(PBTTT),a liquid-crystalline conjugated polymer,with high charge carrier mobility and adaptability to melt-processing techniques.Recent advancements have propelled PBTTT’s figure of merit from below 0.1 to a remarkable 1.28 at 368 K,showcasing its potential for practical applications.This review systematically examines strategies to enhance PBTTT’s TE performance through doping(solution,vapor,and anion exchange doping),composite engineering,and aggregation state controlling.Recent key breakthroughs include ion exchange doping for stable charge modulation,multi-heterojunction architectures reducing thermal conductivity,and proton-coupled electron transfer doping for precise Fermi-level tuning.Despite great progress,challenges still persist in enhancing TE conversion efficiency,balancing or decoupling electrical conductivity,Seebeck coefficient and thermal conductivity,and leveraging melt-processing scalability of PBTTT.By bridging fundamental insights with applied research,this work provides a roadmap for advancing PBTTT-based TE materials toward efficient energy harvesting and wearable electronics.
基金financially supported by the National Natural Science Foundation of China(Nos.22341303,22103079,and 22503003)the Shandong Provincial Natural Science Foundation(No.ZR2023QB232)the Beijing Institute of Technology Research Fund Program for Young Scholars(No.RCPT-6120250009)。
文摘Shear stress overshoot in entangled polymer rheology is a hallmark of transient dynamics,but its microscopic origin remains under debate.Using molecular dynamics simulations,we investigate a two-step shear protocol consisting of successive startup shears separated by a waiting period,with the first shear interrupted before the overshoot.In the homogeneous flow,the GLaMM theory captures the stress response during the first shear,but fails to reproduce the nonmonotonic dependence of the second stress overshoot(σ_(2max))on the waiting time.Contrary to the prediction of a nonmonotonic normal stress component σ_(yy)during the waiting period,our simulations show that σ_(yy),like the tube segment orientation(S_(xy)),the contour length of the primitive chain(L),and the entanglement number per chain(Z),relaxes monotonically toward equilibrium.At the strain corresponding to σ_(2max),both the tube segment orientation and the entanglement number per chain exhibit a nonmonotonic dependence on the waiting time that closely mirrors the behavior of σ_(2max),indicating that both factors play significant roles in governing(σ_(2max).Our findings are consistent with the interpretation of lanniruberto and Ma rrucci[ACS Macro.Lett.2014,3,552]for orientation effects and with the viewpoint of Wang et al.[Macromolecules 2013,46,3147]for entanglement effects,although the two explanations are rooted in distinct physical pictu res.These results provide new insights into the stress responses of entanglement polymer fluids and underscore the need for a more unified theoretical framework.
基金Funded by the National Natural Science Foundation of China(Nos.5226804252468035)。
文摘To investigate the pore structure of graphene oxide modified polymer cement mortar(GOPM)under salt-freeze-thaw(SFT)coupling effects and its impact on deterioration,this study modifies polymer cement mortar(EMCM)with graphene oxide(GO).The micro-pore structure of GOPM is characterized using LF-NMR and SEM.Fractal theory is applied to calculate the fractal dimension of pore volume,and the deterioration patterns are analyzed based on the evolution characteristics of capillary pores.The experimental results indicate that,after 25 salt-freeze-thaw cycles(SFTc),SO2-4 ions penetrate the matrix,generating corrosion products that fill existing pores and enhance the compactness of the specimen.As the number of cycles increases,the ongoing formation and expansion of corrosion products within the matrix,combined with persistent freezing forces,and result in the degradation of the pore structure.Therefore,the mass loss rate(MLR)of the specimens shows a trend of first decreasing and then increasing,while the relative dynamic elastic modulus(RDEM)initially increases and then decreases.Compared to the PC group specimens,the G3PM group specimens show a 28.71% reduction in MLR and a 31.42% increase in RDEM after 150 SFTc.The fractal dimensions of the transition pores,capillary pores,and macropores in the G3PM specimens first increase and then decrease as the number of SFTc increases.Among them,the capillary pores show the highest correlation with MLR and RDEM,with correlation coefficients of 0.97438 and 0.98555,respectively.
基金financial support of this work by the National Natural Science Foundation of China(No.21861039)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX24_2530)the Fundamental Research Funds for the Central Universities。
文摘Acceptorless dehydrogenative coupling of pyridinemethanol with ketones is one of the most reliable methodologies to access functionalized 1,8-naphthyridine derivatives.However,it is challenging to develop environmentally friendly catalytic systems,especially in constructing efficient and recyclable catalysts under water or solvent-free conditions.Here,we designed two novel coordination polymers Cd-CPs and Fe-CPs to investigate their catalytic performance in water.Gratifyingly,it was observed that Cd-CPs as a multifunctional catalyst was successfully applied to establish a universal pathway for direct fabrication of 1,8-naphthyridine derivatives under water conditions,while it was effective for the synthesis of1,3,5-triazines through acceptorless dehydrogenative coupling strategies.The features of broad substrate,high atom efficiency,and good catalyst reusability highlight the feasibility of this transformation.In additional,we demonstrated the spindle-like structures Fe-P,derived from the Fe-CPs via phosphorylation,which can be used as an efficient electrocatalyst for oxygen evolution reaction with good stability.This work provides two highly efficient non-noble metal catalysts for functionalized 1,8-naphthyridine derivatives production and oxygen evolution reaction,and opens a new avenue to further fabricate diverse metal catalysts with high catalytic performance in water.
基金financially supported by the Innovation and Technology Commission of the Hong Kong SAR Government(No.MRP/020/21)Hong Kong Polytechnic University(No.847A)+1 种基金RI-Wear Seed Fund of Poly U(1-CD8J)Start-up Fund of Poly U(1-BD49)。
文摘Polymer matrix composites with high dielectric constants and low dielectric losses are in high demand for flexible electronics.However,simultaneously satisfying these requirements poses a significant scientific challenge owing to the intrinsic trade-off relationship.Herein,we utilized the in situ controllable reduction of graphene oxide(GO)within a poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene)(P(VDF-Tr FE-CFE))matrix to regulate the dielectric properties.The as-obtained composite exhibited a high relative dielectric constant of 1415coupled with a low loss tangent of 0.380 at 100 Hz.Experimental and theoretical studies indicate that the increased degree of electron conjugation and conductivity of the reduced GO(RGO)are responsible for the high-k.The constrained reduction degree of GO,combined with its homogeneous dispersion in the polymer matrix,effectively suppresses long-range charge carrier migration,thereby minimizing dielectric loss.This novel strategy could be successfully applied to both organic and aqueous systems.Furthermore,a high-performance flexible capacitive proximity sensor was exemplified by the optimization of both the dielectric layer and electrode pattern,exhibiting excellent sensitivity and stability.The fundamental mechanisms elucidated in this study provide crucial design principles for developing dielectric PMCs with tailored properties,thereby opening new avenues for advanced flexible electronic applications.
文摘Bone regeneration for non-load-bearing defects remains a significant clinical challenge requiring advanced biomaterials and cellular strategies.Adiposederived mesenchymal stem cells(AD-MSCs)have garnered significant interest in bone tissue engineering(BTE)because of their abundant availability,minimally invasive harvesting procedures,and robust differentiation potential into osteogenic lineages.Unlike bone marrow-derived mesenchymal stem cells,AD-MSCs can be easily obtained in large quantities,making them appealing alternatives for therapeutic applications.This review explores hydrogels containing polymers,such as chitosan,collagen,gelatin,and hyaluronic acid,and their composites,tailored for BTE,and emphasizes the importance of these hydrogels as scaffolds for the delivery of AD-MSCs.Various hydrogel fabrication techniques and biocompatibility assessments are discussed,along with innovative modifications to enhance osteogenesis.This review also briefly outlines AD-MSC isolation methods and advanced embedding techniques for precise cell placement,such as direct encapsulation and three-dimensional bioprinting.We discuss the mechanisms of bone regeneration in the AD-MSC-laden hydrogels,including osteoinduction,vascularization,and extracellular matrix remodeling.We also review the preclinical and clinical applications of AD-MSC-hydrogel systems,emphasizing their success and limitations.In this review,we provide a comprehensive overview of AD-MSC-based hydrogel systems to guide the development of effective therapies for bone regeneration.
文摘We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.
基金the financial support from the National Natural Science Foundation of China(52203123 and 52473248)State Key Laboratory of Polymer Materials Engineering(sklpme2024-2-04)+1 种基金the Fundamental Research Funds for the Central Universitiessponsored by the Double First-Class Construction Funds of Sichuan University。
文摘Composite polymer electrolytes(CPEs)offer a promising solution for all-solid-state lithium-metal batteries(ASSLMBs).However,conventional nanofillers with Lewis-acid-base surfaces make limited contribution to improving the overall performance of CPEs due to their difficulty in achieving robust electrochemical and mechanical interfaces simultaneously.Here,by regulating the surface charge characteristics of halloysite nanotube(HNT),we propose a concept of lithium-ion dynamic interface(Li^(+)-DI)engineering in nano-charged CPE(NCCPE).Results show that the surface charge characteristics of HNTs fundamentally change the Li^(+)-DI,and thereof the mechanical and ion-conduction behaviors of the NCCPEs.Particularly,the HNTs with positively charged surface(HNTs+)lead to a higher Li^(+)transference number(0.86)than that of HNTs-(0.73),but a lower toughness(102.13 MJ m^(-3)for HNTs+and 159.69 MJ m^(-3)for HNTs-).Meanwhile,a strong interface compatibilization effect by Li^(+)is observed for especially the HNTs+-involved Li^(+)-DI,which improves the toughness by 2000%compared with the control.Moreover,HNTs+are more effective to weaken the Li^(+)-solvation strength and facilitate the formation of Li F-rich solid-electrolyte interphase of Li metal compared to HNTs-.The resultant Li|NCCPE|LiFePO4cell delivers a capacity of 144.9 m Ah g^(-1)after 400 cycles at 0.5 C and a capacity retention of 78.6%.This study provides deep insights into understanding the roles of surface charges of nanofillers in regulating the mechanical and electrochemical interfaces in ASSLMBs.
基金the financial supports from National Key Research and Development Project(No.2019YFC1805402)National Natural Science Foundation of China(Nos.U1906229 and U1706223)Project supported by the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(No.52021005)。
文摘Grouting is the most commonly used method to control water inrush in underground engineering.Traditional cement-based materials are easy to dilute and hard to coagulate under the influence of large flow and high-velocity water inrush.To address these deficiencies,a new type of polymer grouting material with an excellent expansion ratio was synthesised.The material quickly absorbs water and has an expansion ratio of 1:300.The material is composed of a superabsorbent polymer(SAP),glycerol,and ethanol.The effects of water quality on the expansion ratio and expansion rate of the material were examined,and the best solid–liquid ratio for the slurry was determined by fluidity measurements.A karst specially designed pipeline water inrush test device showed that 800 g of SAP can achieve 0.6 m/s water flow blockage in the smooth pipeline,demonstrating that the ability of the SAP slurry to block water inrush is superior to those of other materials.This study provides a reference for water inrush plugging,and has important implications for the reduction and control of karst pipeline-type water inrush disasters,ensuring the safety of construction sites and preventing loss of life and damage to property.
