Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-e...Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-energy rockfall protection remains limited due to their relatively low volumetric energy absorption efficiency and the complex fabrication processes of key energy-absorbing components.To address these limitations,this study proposes a novel sandwich structure incorporating mild steel tubes as core energy absorbers to efficiently mitigate highenergy rockfall impacts.A finite element model was developed in LS-DYNA to systematically investigate the deformation and energy absorption behaviors.Comprehensive parametric analyses were conducted to quantify the effects of key design variables,including tube wall thickness,tube spacing(number of tubes),and infill materials.The results demonstrate that increasing tube wall thickness significantly enhances ultimate energy absorption,with 12-mm-thick tubes absorbing 2.2 times more energy than 6-mm-thick tubes.Lateral constraints induced by adjacent tubes improve specific energy absorption per unit displacement by approximately 30%-45%.Furthermore,incorporating infill materials considerably enhances energy absorption,with aluminum foam infills achieving an 81%increase compared to empty tubes.Nevertheless,higher energy absorption capacity typically leads to greater peak impact forces,increasing the number of tubes offers a better balance between energy absorption and impact force,optimizing the structural performance.These findings provide valuable theoretical insights and practical guidelines for designing sandwich structures in civil and infrastructure engineering applications for effective rockfall protection.展开更多
Low-velocity impact tests are carried out to explore the energy absorption characteristics of bio-inspired lattices,mimicking the architecture of the marine sponge organism Euplectella aspergillum.These sea sponge-ins...Low-velocity impact tests are carried out to explore the energy absorption characteristics of bio-inspired lattices,mimicking the architecture of the marine sponge organism Euplectella aspergillum.These sea sponge-inspired lattice structures feature a square-grid 2D lattice with double diagonal bracings and are additively manufactured via digital light processing(DLP).The collapse strength and energy absorption capacity of sea sponge lattice structures are evaluated under various impact conditions and are compared to those of their constituent square-grid and double diagonal lattices.This study demonstrates that sea sponge lattices can achieve an 11-fold increase in energy absorption compared to the square-grid lattice,due to the stabilizing effect of the double diagonal bracings prompting the structure to collapse layer-bylayer under impact.By adjusting the thickness ratio in the sea sponge lattice,up to 76.7%increment in energy absorption is attained.It is also shown that sea-sponge lattices outperform well-established energy-absorbing materials of equal weight,such as hexagonal honeycombs,confirming their significant potential for impact mitigation.Additionally,this research highlights the enhancements in energy absorption achieved by adding a small amount(0.015 phr)of Multi-Walled Carbon Nanotubes(MWCNTs)to the photocurable resin,thus unlocking new possibilities for the design of innovative lightweight structures with multifunctional attributes.展开更多
Anchovies are key forage species in coastal and pelagic food webs,playing crucial ecological and commercial roles in marine ecosystems.Encrasicholina punctifer is a commercially and ecologically important species,yet ...Anchovies are key forage species in coastal and pelagic food webs,playing crucial ecological and commercial roles in marine ecosystems.Encrasicholina punctifer is a commercially and ecologically important species,yet little is known about its osteological development characteristics.Understanding these ontogenetic patterns is essential for explaining phylogenetic relationships within Clupeiformes,informing larval identification in ichthyoplankton surveys,and enhancing aquaculture practices.This study describes the ontogenetic characteristics of the appendicular and median skeletons and fin supports in E.punctifer larvae and juveniles,providing quantitative ontogenetic timelines to address gaps in engraulid developmental biology and contribute to teleost ontogeny research.Larval and juvenile specimens of E.punctifer;size range:3.00-34.56 mm standard length(SL)and notochord length(NL)collected from the Philippine Sea were processed using the standard Alizarin red and Alcian blue clearing-and-staining technique to differentiate ossified and cartilaginous elements.Specimens were examined under a stereo microscope and imaged with an HTC1600ISP digital camera for detailed morphological analysis of skeletal structures.Caudal complex development was evident by 5.55 mm NL,with the initial appearance of cartilaginous hypurals 1–2 and parhypural,followed by Hy3–5 at 6.08 mm NL.Cartilaginous Hy6 was visible by 9.58 mm SL in postflexion larvae.Six hypural bones were present from the postflexion to juvenile stage.Principal fin rays formed via intramembranous ossification at 6.32 mm NL,and segmentation was evident by 10.24 mm SL.Neural arch 1 appeared at 7.38 mm NL,preceding full haemal arch development.Uroneurals 1–2 and ural centra ossified by 9.58 mm SL,with Hy5 detached from U1 at 10.24 mm SL.Preural centra ossified before the arches.Epurals 1 and 2 were evident by 10.24 mm SL.Dorsal fin proximal radials developed anteriorly and distal radials posteriorly.Pectoral fin development initiated with an ossified cleithrum and the coracoscapular cartilage at 5.25 mm NL.By 10.24 mm SL,cartilaginous neural and haemal arches and spines were distinct.Uroneural 1 initially develops as cartilage.The formation of a pleurostyle aligns with clupeoid fish skeletal ontogeny.Dorsal and anal fin development follows a distinctive pattern,with variability in fin support development.Our results reveal accelerated caudal complex formation in E.punctifer and contribute new knowledge on the osteological characteristics of the genus Encrasicholina,and aid in understanding larval and juvenile ontogeny of marine teleosts.展开更多
Functionally graded cellular structures(FGCSs)have a multitude of applications to a wide range of industries.Utilising the ever-progressing technology of additive manufacturing(AM),FGCSs can be applied to control mate...Functionally graded cellular structures(FGCSs)have a multitude of applications to a wide range of industries.Utilising the ever-progressing technology of additive manufacturing(AM),FGCSs can be applied to control material grading and achieve the desired mechanical properties.The current study explores the design and optimisation of FGCSs for AM,with a focus on improving the compression and impact performance of below knee(BK)prosthetic limbs made of thermoplastic polyurethane(TPU).A multiscale research methodology integrating topology optimization(TO),finite element analysis(FEA),and design of experiments(Do E)was adopted to optimise lattice structures in terms of stiffness and lightweight properties.Two-unit cell designs were considered in the study:Schwarz P gyroid and body-centered cubic(BCC).Response surface methodology(RSM)was implemented to analyse the effect of minimum and maximum cell wall thickness,cell size,and unit cell type on the mechanical performance of TPU FGCS structures.The results indicated that a Schwarz P FGCS structure with cell size,minimum and maximum cell wall thickness of 6,0.9 and 2.8 mm,respectively,could be optimal for a compromise between performance and weight.In this optimized case,stiffness and volume fraction values of 684 N/mm and 0.64 were obtained,respectively.The study also presents a proof-of-concept design for a BK prosthetic damper,highlighting the potential of FGCSs to enhance patient comfort,reduce manufacturing costs,and enable personalised designs through 3D scanning and AM.The obtained results could be a step forward towards the incorporation of AM technologies in prosthetics,offering a pathway to lightweight,cost-effective,and functionally tailored solutions.展开更多
Tilted metasurface nanostructures,with excellent physical properties and enormous application potential,pose an urgent need for manufacturing methods.Here,electric-field-driven generative-nanoimprinting technique is p...Tilted metasurface nanostructures,with excellent physical properties and enormous application potential,pose an urgent need for manufacturing methods.Here,electric-field-driven generative-nanoimprinting technique is proposed.The electric field applied between the template and the substrate drives the contact,tilting,filling,and holding processes.By accurately controlling the introduced included angle between the flexible template and the substrate,tilted nanostructures with a controllable angle are imprinted onto the substrate,although they are vertical on the template.By flexibly adjusting the electric field intensity and the included angle,large-area uniform-tilted,gradient-tilted,and high-angle-tilted nanostructures are fabricated.In contrast to traditional replication,the morphology of the nanoimprinting structure is extended to customized control.This work provides a cost-effective,efficient,and versatile technology for the fabrication of various large-area tilted metasurface structures.As an illustration,a tilted nanograting with a high coupling efficiency is fabricated and integrated into augmented reality displays,demonstrating superior imaging quality.展开更多
In the present work,the porous Ti particle reinforced Mg-based bulk metallic glass matrix composites(BMGCs)have been successfully fabricated via a novel in-situ dealloying method in metallic melt.A dual reinforcing st...In the present work,the porous Ti particle reinforced Mg-based bulk metallic glass matrix composites(BMGCs)have been successfully fabricated via a novel in-situ dealloying method in metallic melt.A dual reinforcing structure,including large-scale between porous particles and fine-scale inside one particle,was induced to further overcome the strength-plasticity tradeoff.The microstructure and mechanical properties of such dual-scale structure-reinforced BMGCs with various volume fractions and diameters of porous Ti particles were investigated in detail.It is found that with more and finer porous Ti particles,the BMGC showed both high fracture strength(1131.9±39.1 MPa)and good plastic deformability(1.48±0.38%).The characteristic of the reinforcing structure(0.48μm)inside the porous particles was close to the plastic processing zone size of the matrix(0.1~0.2μm),which generated a locally ideal reinforcing structure.Such dual-scale reinforcing structures with more interfaces can effectively promote the multiplication of shear bands at the interfaces.Due to the size effect,the refined submicron matrix between the Ti ligaments inside the porous particles should exhibit homogeneous shearing events.Such delocalization behavior from the dual-scale reinforcing structures should help to enhance the role of the interactions between shear bands,thus improving the yield strength of the composites.Based on the in-situ dealloying method,the dual-scale structure design provides a novel approach to fabricate various BMGCs with both high strength and good plasticity.展开更多
This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700℃by integrating experimental testing and advanced numerical modeling.A tempe...This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700℃by integrating experimental testing and advanced numerical modeling.A temperature-indexed Concrete Damage Plasticity(CDP)framework incorporating bond–slip effects was developed in Abaqus to capture both global stress–strain responses and localized damage evolution.Uniaxial compression tests on thermally exposed cylinders provided residual strength data and failure observations for model calibration and validation.Results demonstrated a distinct two-stage degradation regime:moderate stiffness and strength reduction up to~400℃,followed by sharp deterioration beyond 500℃–600℃,with residual capacity at 700℃reduced to~20%–25%of the ambient value.Strain–damage analyses revealed the formation of a peripheral tensile strain band,which thickened and propagated inward with increasing temperature,governing crack initiation and cover spalling.Supplemental analyses highlighted that transverse reinforcement improved ductility and damage distribution at moderate temperatures(~300℃),but bond deterioration and steel softening beyond~600℃substantially diminished confinement effectiveness.The proposed CDP model accurately reproduced experimental stress–strain curves(R^(2)≈0.94–0.98 up to 600℃;≈0.90 at 700℃),with peak stress errors within 7%–10%and energy absorption captured within~12%.These findings confirm the robustness of the temperature-indexed CDP framework for simulating fire-damaged reinforced concrete and provide practical guidelines for post-fire assessment,spalling detection,and fire-resilient design of structural members.展开更多
With the in-depth implementation of sustainable development strategies,hydrogen energy as a clean energy source is receiving increasing attention[1,2].Among the various methods of hydrogen production,the electrocataly...With the in-depth implementation of sustainable development strategies,hydrogen energy as a clean energy source is receiving increasing attention[1,2].Among the various methods of hydrogen production,the electrocatalytic decomposition of abundant seawater into hydrogen utilizing renewable energy has emerged as a green and promising approach.However,natural seawater contains complex components,such as halide ions,which lead to the corrosion of catalysts or the occurrence of competitive side reactions during the electrolysis process[3].展开更多
Brazing filler metals are widely applied,which serve as an industrial adhesive in the joining of dissimilar structures.With the continuous emergence of new structures and materials,the demand for novel brazing filler ...Brazing filler metals are widely applied,which serve as an industrial adhesive in the joining of dissimilar structures.With the continuous emergence of new structures and materials,the demand for novel brazing filler metals is ever-increasing.It is of great significance to investigate the optimized composition design methods and to establish systematic design guidelines for brazing filler metals.This study elucidated the fundamental rules for the composition design of brazing filler metals from a three-dimensional perspective encompassing the basic properties of applied brazing filler metals,formability and processability,and overall cost.The basic properties of brazing filler metals refer to their mechanical properties,physicochemical properties,electromagnetic properties,corrosion resistance,and the wettability and fluidity during brazing.The formability and processability of brazing filler metals include the processes of smelting and casting,extrusion,rolling,drawing and ring-making,as well as the processes of granulation,powder production,and the molding of amorphous and microcrystalline structures.The cost of brazing filler metals corresponds to the sum of materials value and manufacturing cost.Improving the comprehensive properties of brazing filler metals requires a comprehensive and systematic consideration of design indicators.Highlighting the unique characteristics of brazing filler metals should focus on relevant technical indicators.Binary or ternary eutectic structures can effectively enhance the flow spreading ability of brazing filler metals,and solid solution structures contribute to the formability.By employing the proposed design guidelines,typical Ag based,Cu based,Zn based brazing filler metals,and Sn based solders were designed and successfully applied in major scientific and engineering projects.展开更多
As-forged WSTi6421 titanium alloy billet afterβannealing was investigated.Abnormally coarse grains larger than adjacent grains could be observed in the microstructures,forming abnormal grain structures with uneven si...As-forged WSTi6421 titanium alloy billet afterβannealing was investigated.Abnormally coarse grains larger than adjacent grains could be observed in the microstructures,forming abnormal grain structures with uneven size distribution.Through electron backscattered diffraction(EBSD),the forged microstructure at various locations of as-forged WSTi6421 titanium alloy billet was analyzed,revealing that the strength of theβphase cubic texture generated by forging significantly influences the grain size afterβannealing.Heat treatment experiments were conducted within the temperature range from T_(β)−50°C to T_(β)+10°C to observe the macro-and micro-morphologies.Results show that the cubic texture ofβphase caused by forging impacts the texture of the secondaryαphase,which subsequently influences theβphase formed during the post-βannealing process.Moreover,the pinning effect of the residual primaryαphase plays a crucial role in the growth ofβgrains during theβannealing process.EBSD analysis results suggest that the strength ofβphase with cubic texture formed during forging process impacts the orientation distribution differences ofβgrains afterβannealing.Additionally,the development of grains with large orientations within the cubic texture shows a certain degree of selectivity duringβannealing,which is affected by various factors,including the pinning effect of the primaryαphase,the strength of the matrix cubic texture,and the orientation relationship betweenβgrain and matrix.Comprehensively,the stronger the texture in a certain region,the less likely the large misoriented grains suffering secondary growth,thereby aggregating the difference in microstructure and grain orientation distribution across different regions afterβannealing.展开更多
The damage distribution of the same type of aircraft in similar service environments should be similar. Based on this assumption, to perform the maintenance and repair of aircraft composite structures, the damage of c...The damage distribution of the same type of aircraft in similar service environments should be similar. Based on this assumption, to perform the maintenance and repair of aircraft composite structures, the damage of composite structures in a certain type of aircraft were investigated. The time-varying damage distribution model was established and verified based on the damage of a 16-aircraft fleet. The results show that the quantitative proportions of structural damage are 74% for skin delamination, 22% for stringer delamination and 3% for stringer-skin interface debonding. The amount of structural damages increases linearly with service time while the proportion of different damages does not change. As the service time increases, the geometric parameter distribution of damage for the same type of aircraft gradually converges, which can be approximated using the same function. There are certain differences in the proportion and geometric parameter distribution of damages among different components and locations, and the differences do not change over time.展开更多
As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of ai...As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.展开更多
To ensure the structural integrity of life-limiting component of aeroengines,Probabilistic Damage Tolerance(PDT)assessment is applied to evaluate the failure risk as required by airworthiness regulations and military ...To ensure the structural integrity of life-limiting component of aeroengines,Probabilistic Damage Tolerance(PDT)assessment is applied to evaluate the failure risk as required by airworthiness regulations and military standards.The PDT method holds the view that there exist defects such as machining scratches and service cracks in the tenon-groove structures of aeroengine disks.However,it is challenging to conduct PDT assessment due to the scarcity of effective Probability of Detection(POD)model and anomaly distribution model.Through a series of Nondestructive Testing(NDT)experiments,the POD model of real cracks in tenon-groove structures is constructed for the first time by employing the Transfer Function Method(TFM).A novel anomaly distribution model is derived through the utilization of the POD model,instead of using the infeasible field data accumulation method.Subsequently,a framework for calculating the Probability of Failure(POF)of the tenon-groove structures is established,and the aforementioned two models exert a significant influence on the results of POF.展开更多
The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in ...The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.展开更多
Taking a widely contaminated yet abundant waste,such as poultry feathers,and extracting keratin from this struc-ture appears to be a real challenge whenever the preservation of the secondary structure of the protein i...Taking a widely contaminated yet abundant waste,such as poultry feathers,and extracting keratin from this struc-ture appears to be a real challenge whenever the preservation of the secondary structure of the protein is desired.This process would allow exploiting it in ways(e.g.,in the biomedicalfield)that are inspired by a structure that is primarily designed forflight,therefore capable specifically of withstandingflexure and lateral buckling,also with very low thicknesses.The preservation of the structure is based on disulfide crosslinks,and it is offered with pre-ference by some chemical treatments,mainly those based on ionic liquid and on a reduction process.However,the degree of preservation cannot always be precisely assessed;however,beyond chemical characterization,the forma-tion of homogeneous gels can also suggest that the process was successful in this sense.An extraction respectful of nature’s intentions,considering that the secondary structure builds up according to the very function of the feath-ers in the animal,can be deemed to be biomimetic.In particular,biomimetic extractions comply with the very characteristics the protein was designed for to serve in the specific environmental and mechanical situation in which it is inserted.This review tries to elucidate in which cases this aim is achieved and for which specific appli-cations a chicken feather keratin that has preserved its secondary structure can be suited.展开更多
Cholesteric liquid crystals(CLCs)exhibit unique helical superstructures that selectively reflect circularly polarized light,enabling them to dynamically respond to environmental changes with tunable structural colors....Cholesteric liquid crystals(CLCs)exhibit unique helical superstructures that selectively reflect circularly polarized light,enabling them to dynamically respond to environmental changes with tunable structural colors.This dynamic color-changing capability is crucial for applications that require adaptable optical properties,positioning CLCs as key materials in advanced photonic technologies.This review focuses on the mechanisms of dynamic color tuning in CLCs across various forms,including small molecules,cholesteric liquid crystal elastomers(CLCEs),and cholesteric liquid crystal networks(CLCNs),and emphasizes the distinct responsive coloration each structure provides.Key developments in photochromic mechanisms based on azobenzene,dithienylethene,and molecular motor switches,are discussed for their roles in enhancing the stability and tuning range of CLCs.We examine the color-changing behaviors of CLCEs under mechanical stimuli and CLCNs under swelling,highlighting the advantages of each form.Following this,applications of dynamic color-tuning CLCs in information encryption,adaptive camouflage,and smart sensing technologies are explored.The review concludes with an outlook on current challenges and future directions in CLC research,particularly in biomimetic systems and dynamic photonic devices,aiming to broaden their functional applications and impact.展开更多
Lithium-sulfur(Li-S)chemistry reaction opens a new battery era with high energy density;meanwhile,multiple electrons migration leads to the complex phase transition of sulfur species.To manipulate the binding strength...Lithium-sulfur(Li-S)chemistry reaction opens a new battery era with high energy density;meanwhile,multiple electrons migration leads to the complex phase transition of sulfur species.To manipulate the binding strength of multiple key intermediates more efficiently,the bimetallic TiVC MXene is utilized to realize multi-dimensional catalysis.Based on the macroscopic three-dimensional(3D)structure using two-dimensional(2D)MXene architecture,electron conductivity and sulfur utilization are improved.Microscopically,Ti-V catalytic systems regulate multiple reaction intermediates through intermetallic synergies customized surface properties and atomic scale coordination,thereby improving electronic and ionic conductivity.In-situ Raman spectroscopy and electrochemical analysis show that the conversion rate of polysulfides was accelerated during the charge-discharge process.The Ti-V interaction exhibits unique catalytic activity and regulates multiple continuous processes of sulfur species phase transformation,which are essential for the excellent energy performance of Li-S batteries.This study not only clarifies the catalytic mechanism of Ti-V at different dimensions but also proposes a promising strategy for the design of advanced catalytic systems in energy storage technology.展开更多
The current artificial bone is unable to accurately replicate the inhomogeneity and anisotropy of human cancellous bone.To address this issue,we proposed a personalized approach based on clinical CT images to design m...The current artificial bone is unable to accurately replicate the inhomogeneity and anisotropy of human cancellous bone.To address this issue,we proposed a personalized approach based on clinical CT images to design mechanical equivalent porous structures for artificial femoral heads.Firstly,supported by Micro and clinical CT scans of 21 bone specimens,the anisotropic mechanical parameters of human cancellous bone in the femoral head were characterized using clinical CT values(Hounsfield unit).After that,the equivalent porous structure of cancellous bone was designed based on the gyroid surface,the influence of its degree of anisotropy and volume fraction on the macroscopic mechanical parameters was investigated by finite element analysis.Furthermore,a mapping relationship between CT values and the porous structure was established by jointly solving the mechanical parameters of the porous structure and human cancellous bone,allowing the design of personalized gradient porous structures based on clinical CT images.Finally,to verify the mechanical equivalence,implant press-in tests were conducted on 3D-printed artificial femoral heads and human femoral heads,the influence of the porous structure’s cell size in bone-implant interaction problems was also explored.Results showed that the minimum deviations of press-in stiffness(<15%)and peak load(<5%)both occurred when the cell size was 20%to 30%of the implant diameter.In conclusion,the designed porous structure can replicate the human cancellous bone-implant interaction at a high level,indicating its effectiveness in optimizing the mechanical performance of 3D-printed artificial femoral head.展开更多
The strength improvement in the heat-treatable Al-Zn-Mg-Cu alloys is generally achieved by increasing the volume fraction of nanoprecipitates and reducing the grain size.However,utilizing one of them usu-ally leads to...The strength improvement in the heat-treatable Al-Zn-Mg-Cu alloys is generally achieved by increasing the volume fraction of nanoprecipitates and reducing the grain size.However,utilizing one of them usu-ally leads to a drastic decrease in ductility.Herein,we architect a hierarchical microstructure integrating bimodal grain structures,nanoprecipitates,and hard-brittle coarse particles wrapped by ductility coarse grain(CG)bands via conventional cold rolling(CR)deformation and heat treatment methods to break the strength-ductility dilemma in the Al-8.89Zn-1.98Mg-2.06Cu-0.12Zr-0.05Sc-0.05Hf(wt.%)alloy.The results reveal that the coupling of high-volume fraction(∼1.2%)nanoprecipitates,∼52%narrow CG bands,and most coarse particles encapsulated by CG bands contribute to the 45%CR sample with outstanding over-all mechanical properties(a tensile strength of 655 MPa,a yield strength of 620 MPa,and an elongation of 15.5%).Microstructure-based strength analysis confirms that the high strength relates to a trade-offbetween the hierarchical features,namely high-volume fraction nanoprecipitates to counterbalance the strength loss caused by grain coarsening.The excellent ductility is due to the introduction of medium CG content with a narrow width that can trigger a cross-scale strain distribution during plastic deforma-tion,suppressing the catastrophic failure in the fine grain(FG)regions and facilitating the dimple fracture along the CG bands.This study proposes a feasible approach for tailoring hierarchical microstructures in Al-Zn-Mg-Cu alloys to achieve a superior strength-ductility combination.展开更多
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
基金supported by the National Key R&D Program of China(Grant No.2019YFC1509703)the Tianjin Science and Technology Program Project(Grant No.23YFYSHZ00130)。
文摘Sandwich structures are widely favored for their lightweight,high strength and superior impact mitigation capabilities in blast mitigation and transportation safety applications.Their application in large-scale,high-energy rockfall protection remains limited due to their relatively low volumetric energy absorption efficiency and the complex fabrication processes of key energy-absorbing components.To address these limitations,this study proposes a novel sandwich structure incorporating mild steel tubes as core energy absorbers to efficiently mitigate highenergy rockfall impacts.A finite element model was developed in LS-DYNA to systematically investigate the deformation and energy absorption behaviors.Comprehensive parametric analyses were conducted to quantify the effects of key design variables,including tube wall thickness,tube spacing(number of tubes),and infill materials.The results demonstrate that increasing tube wall thickness significantly enhances ultimate energy absorption,with 12-mm-thick tubes absorbing 2.2 times more energy than 6-mm-thick tubes.Lateral constraints induced by adjacent tubes improve specific energy absorption per unit displacement by approximately 30%-45%.Furthermore,incorporating infill materials considerably enhances energy absorption,with aluminum foam infills achieving an 81%increase compared to empty tubes.Nevertheless,higher energy absorption capacity typically leads to greater peak impact forces,increasing the number of tubes offers a better balance between energy absorption and impact force,optimizing the structural performance.These findings provide valuable theoretical insights and practical guidelines for designing sandwich structures in civil and infrastructure engineering applications for effective rockfall protection.
基金supported by the Khalifa University of Science and Technology internal grants(Nos.2021-CIRA-109,2020-CIRA-007,and 2020-CIRA-024).
文摘Low-velocity impact tests are carried out to explore the energy absorption characteristics of bio-inspired lattices,mimicking the architecture of the marine sponge organism Euplectella aspergillum.These sea sponge-inspired lattice structures feature a square-grid 2D lattice with double diagonal bracings and are additively manufactured via digital light processing(DLP).The collapse strength and energy absorption capacity of sea sponge lattice structures are evaluated under various impact conditions and are compared to those of their constituent square-grid and double diagonal lattices.This study demonstrates that sea sponge lattices can achieve an 11-fold increase in energy absorption compared to the square-grid lattice,due to the stabilizing effect of the double diagonal bracings prompting the structure to collapse layer-bylayer under impact.By adjusting the thickness ratio in the sea sponge lattice,up to 76.7%increment in energy absorption is attained.It is also shown that sea-sponge lattices outperform well-established energy-absorbing materials of equal weight,such as hexagonal honeycombs,confirming their significant potential for impact mitigation.Additionally,this research highlights the enhancements in energy absorption achieved by adding a small amount(0.015 phr)of Multi-Walled Carbon Nanotubes(MWCNTs)to the photocurable resin,thus unlocking new possibilities for the design of innovative lightweight structures with multifunctional attributes.
文摘Anchovies are key forage species in coastal and pelagic food webs,playing crucial ecological and commercial roles in marine ecosystems.Encrasicholina punctifer is a commercially and ecologically important species,yet little is known about its osteological development characteristics.Understanding these ontogenetic patterns is essential for explaining phylogenetic relationships within Clupeiformes,informing larval identification in ichthyoplankton surveys,and enhancing aquaculture practices.This study describes the ontogenetic characteristics of the appendicular and median skeletons and fin supports in E.punctifer larvae and juveniles,providing quantitative ontogenetic timelines to address gaps in engraulid developmental biology and contribute to teleost ontogeny research.Larval and juvenile specimens of E.punctifer;size range:3.00-34.56 mm standard length(SL)and notochord length(NL)collected from the Philippine Sea were processed using the standard Alizarin red and Alcian blue clearing-and-staining technique to differentiate ossified and cartilaginous elements.Specimens were examined under a stereo microscope and imaged with an HTC1600ISP digital camera for detailed morphological analysis of skeletal structures.Caudal complex development was evident by 5.55 mm NL,with the initial appearance of cartilaginous hypurals 1–2 and parhypural,followed by Hy3–5 at 6.08 mm NL.Cartilaginous Hy6 was visible by 9.58 mm SL in postflexion larvae.Six hypural bones were present from the postflexion to juvenile stage.Principal fin rays formed via intramembranous ossification at 6.32 mm NL,and segmentation was evident by 10.24 mm SL.Neural arch 1 appeared at 7.38 mm NL,preceding full haemal arch development.Uroneurals 1–2 and ural centra ossified by 9.58 mm SL,with Hy5 detached from U1 at 10.24 mm SL.Preural centra ossified before the arches.Epurals 1 and 2 were evident by 10.24 mm SL.Dorsal fin proximal radials developed anteriorly and distal radials posteriorly.Pectoral fin development initiated with an ossified cleithrum and the coracoscapular cartilage at 5.25 mm NL.By 10.24 mm SL,cartilaginous neural and haemal arches and spines were distinct.Uroneural 1 initially develops as cartilage.The formation of a pleurostyle aligns with clupeoid fish skeletal ontogeny.Dorsal and anal fin development follows a distinctive pattern,with variability in fin support development.Our results reveal accelerated caudal complex formation in E.punctifer and contribute new knowledge on the osteological characteristics of the genus Encrasicholina,and aid in understanding larval and juvenile ontogeny of marine teleosts.
基金financially supported and funded by the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University(IMSIU)(No.IMSIU-DDRSP2503)。
文摘Functionally graded cellular structures(FGCSs)have a multitude of applications to a wide range of industries.Utilising the ever-progressing technology of additive manufacturing(AM),FGCSs can be applied to control material grading and achieve the desired mechanical properties.The current study explores the design and optimisation of FGCSs for AM,with a focus on improving the compression and impact performance of below knee(BK)prosthetic limbs made of thermoplastic polyurethane(TPU).A multiscale research methodology integrating topology optimization(TO),finite element analysis(FEA),and design of experiments(Do E)was adopted to optimise lattice structures in terms of stiffness and lightweight properties.Two-unit cell designs were considered in the study:Schwarz P gyroid and body-centered cubic(BCC).Response surface methodology(RSM)was implemented to analyse the effect of minimum and maximum cell wall thickness,cell size,and unit cell type on the mechanical performance of TPU FGCS structures.The results indicated that a Schwarz P FGCS structure with cell size,minimum and maximum cell wall thickness of 6,0.9 and 2.8 mm,respectively,could be optimal for a compromise between performance and weight.In this optimized case,stiffness and volume fraction values of 684 N/mm and 0.64 were obtained,respectively.The study also presents a proof-of-concept design for a BK prosthetic damper,highlighting the potential of FGCSs to enhance patient comfort,reduce manufacturing costs,and enable personalised designs through 3D scanning and AM.The obtained results could be a step forward towards the incorporation of AM technologies in prosthetics,offering a pathway to lightweight,cost-effective,and functionally tailored solutions.
基金supported by National Natural Science Foundation of China(No.52025055 and 52275571)Basic Research Operation Fund of China(No.xzy012024024).
文摘Tilted metasurface nanostructures,with excellent physical properties and enormous application potential,pose an urgent need for manufacturing methods.Here,electric-field-driven generative-nanoimprinting technique is proposed.The electric field applied between the template and the substrate drives the contact,tilting,filling,and holding processes.By accurately controlling the introduced included angle between the flexible template and the substrate,tilted nanostructures with a controllable angle are imprinted onto the substrate,although they are vertical on the template.By flexibly adjusting the electric field intensity and the included angle,large-area uniform-tilted,gradient-tilted,and high-angle-tilted nanostructures are fabricated.In contrast to traditional replication,the morphology of the nanoimprinting structure is extended to customized control.This work provides a cost-effective,efficient,and versatile technology for the fabrication of various large-area tilted metasurface structures.As an illustration,a tilted nanograting with a high coupling efficiency is fabricated and integrated into augmented reality displays,demonstrating superior imaging quality.
基金supported by National Natural Science Foundation of China(No.52101138)Natural Science Foundation of Hubei Province(No.2023AFB798)+1 种基金Shenzhen Science and Technology Program(No.JCYJ20220530160813032)State Key Laboratory of Solidification Processing in NWPU(No.SKLSP202309).
文摘In the present work,the porous Ti particle reinforced Mg-based bulk metallic glass matrix composites(BMGCs)have been successfully fabricated via a novel in-situ dealloying method in metallic melt.A dual reinforcing structure,including large-scale between porous particles and fine-scale inside one particle,was induced to further overcome the strength-plasticity tradeoff.The microstructure and mechanical properties of such dual-scale structure-reinforced BMGCs with various volume fractions and diameters of porous Ti particles were investigated in detail.It is found that with more and finer porous Ti particles,the BMGC showed both high fracture strength(1131.9±39.1 MPa)and good plastic deformability(1.48±0.38%).The characteristic of the reinforcing structure(0.48μm)inside the porous particles was close to the plastic processing zone size of the matrix(0.1~0.2μm),which generated a locally ideal reinforcing structure.Such dual-scale reinforcing structures with more interfaces can effectively promote the multiplication of shear bands at the interfaces.Due to the size effect,the refined submicron matrix between the Ti ligaments inside the porous particles should exhibit homogeneous shearing events.Such delocalization behavior from the dual-scale reinforcing structures should help to enhance the role of the interactions between shear bands,thus improving the yield strength of the composites.Based on the in-situ dealloying method,the dual-scale structure design provides a novel approach to fabricate various BMGCs with both high strength and good plasticity.
文摘This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700℃by integrating experimental testing and advanced numerical modeling.A temperature-indexed Concrete Damage Plasticity(CDP)framework incorporating bond–slip effects was developed in Abaqus to capture both global stress–strain responses and localized damage evolution.Uniaxial compression tests on thermally exposed cylinders provided residual strength data and failure observations for model calibration and validation.Results demonstrated a distinct two-stage degradation regime:moderate stiffness and strength reduction up to~400℃,followed by sharp deterioration beyond 500℃–600℃,with residual capacity at 700℃reduced to~20%–25%of the ambient value.Strain–damage analyses revealed the formation of a peripheral tensile strain band,which thickened and propagated inward with increasing temperature,governing crack initiation and cover spalling.Supplemental analyses highlighted that transverse reinforcement improved ductility and damage distribution at moderate temperatures(~300℃),but bond deterioration and steel softening beyond~600℃substantially diminished confinement effectiveness.The proposed CDP model accurately reproduced experimental stress–strain curves(R^(2)≈0.94–0.98 up to 600℃;≈0.90 at 700℃),with peak stress errors within 7%–10%and energy absorption captured within~12%.These findings confirm the robustness of the temperature-indexed CDP framework for simulating fire-damaged reinforced concrete and provide practical guidelines for post-fire assessment,spalling detection,and fire-resilient design of structural members.
基金financially supported by the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications(No.NY223016)Qinglan Project of Jiangsu Province of China2024 Nanjing Science and Technology Innovation Program(No.NJKCZYZZ2024-06)。
文摘With the in-depth implementation of sustainable development strategies,hydrogen energy as a clean energy source is receiving increasing attention[1,2].Among the various methods of hydrogen production,the electrocatalytic decomposition of abundant seawater into hydrogen utilizing renewable energy has emerged as a green and promising approach.However,natural seawater contains complex components,such as halide ions,which lead to the corrosion of catalysts or the occurrence of competitive side reactions during the electrolysis process[3].
基金National Natural Science Foundation of China(U22A20191)。
文摘Brazing filler metals are widely applied,which serve as an industrial adhesive in the joining of dissimilar structures.With the continuous emergence of new structures and materials,the demand for novel brazing filler metals is ever-increasing.It is of great significance to investigate the optimized composition design methods and to establish systematic design guidelines for brazing filler metals.This study elucidated the fundamental rules for the composition design of brazing filler metals from a three-dimensional perspective encompassing the basic properties of applied brazing filler metals,formability and processability,and overall cost.The basic properties of brazing filler metals refer to their mechanical properties,physicochemical properties,electromagnetic properties,corrosion resistance,and the wettability and fluidity during brazing.The formability and processability of brazing filler metals include the processes of smelting and casting,extrusion,rolling,drawing and ring-making,as well as the processes of granulation,powder production,and the molding of amorphous and microcrystalline structures.The cost of brazing filler metals corresponds to the sum of materials value and manufacturing cost.Improving the comprehensive properties of brazing filler metals requires a comprehensive and systematic consideration of design indicators.Highlighting the unique characteristics of brazing filler metals should focus on relevant technical indicators.Binary or ternary eutectic structures can effectively enhance the flow spreading ability of brazing filler metals,and solid solution structures contribute to the formability.By employing the proposed design guidelines,typical Ag based,Cu based,Zn based brazing filler metals,and Sn based solders were designed and successfully applied in major scientific and engineering projects.
基金Key Research and Development Plan of Shaanxi Province(2023-YBGY-493)。
文摘As-forged WSTi6421 titanium alloy billet afterβannealing was investigated.Abnormally coarse grains larger than adjacent grains could be observed in the microstructures,forming abnormal grain structures with uneven size distribution.Through electron backscattered diffraction(EBSD),the forged microstructure at various locations of as-forged WSTi6421 titanium alloy billet was analyzed,revealing that the strength of theβphase cubic texture generated by forging significantly influences the grain size afterβannealing.Heat treatment experiments were conducted within the temperature range from T_(β)−50°C to T_(β)+10°C to observe the macro-and micro-morphologies.Results show that the cubic texture ofβphase caused by forging impacts the texture of the secondaryαphase,which subsequently influences theβphase formed during the post-βannealing process.Moreover,the pinning effect of the residual primaryαphase plays a crucial role in the growth ofβgrains during theβannealing process.EBSD analysis results suggest that the strength ofβphase with cubic texture formed during forging process impacts the orientation distribution differences ofβgrains afterβannealing.Additionally,the development of grains with large orientations within the cubic texture shows a certain degree of selectivity duringβannealing,which is affected by various factors,including the pinning effect of the primaryαphase,the strength of the matrix cubic texture,and the orientation relationship betweenβgrain and matrix.Comprehensively,the stronger the texture in a certain region,the less likely the large misoriented grains suffering secondary growth,thereby aggregating the difference in microstructure and grain orientation distribution across different regions afterβannealing.
文摘The damage distribution of the same type of aircraft in similar service environments should be similar. Based on this assumption, to perform the maintenance and repair of aircraft composite structures, the damage of composite structures in a certain type of aircraft were investigated. The time-varying damage distribution model was established and verified based on the damage of a 16-aircraft fleet. The results show that the quantitative proportions of structural damage are 74% for skin delamination, 22% for stringer delamination and 3% for stringer-skin interface debonding. The amount of structural damages increases linearly with service time while the proportion of different damages does not change. As the service time increases, the geometric parameter distribution of damage for the same type of aircraft gradually converges, which can be approximated using the same function. There are certain differences in the proportion and geometric parameter distribution of damages among different components and locations, and the differences do not change over time.
基金supported by the National Natural Science Foundation of China(Nos.62101020 and 62141405)the Special Scientific Research Project of Civil Aircraft,China(No.MJZ5-2N22).
文摘As the proportion of composite materials used in aircraft continues to increase, the electromagnetic Shielding Effectiveness (SE) of these materials becomes a critical factor in the electromagnetic safety design of aircraft structures. The assessment of electromagnetic SE for Slotted Composite Structures(SCSs) is particularly challenging due to their complex geometries and there remains a lack of suitable models for accurately predicting the SE performance of these intricate configurations. To address this issue, this paper introduces SCS-Net, a Deep Neural Network (DNN) method designed to accurately predict the SE of SCS. This method considers the impacts of various structural parameters, material properties and incident wave parameters on the SE of SCSs. In order to better model the SCS, an improved Nicolson-Ross-Weir (NRW) method is introduced in this paper to provide an equivalent flat structure for the SCS and to calculate the electromagnetic parameters of the equivalent structure. Additionally, the prediction of SE via DNNs is limited by insufficient test data, which hinders support for large-sample training. To address the issue of limited measured data, this paper develops a Measurement-Computation Fusion (MCF) dataset construction method. The predictions based on the simulation results show that the proposed method maintains an error of less than 0.07 dB within the 8–10 GHz frequency range. Furthermore, a new loss function based on the weighted L1-norm is established to improve the prediction accuracy for these parameters. Compared with traditional loss functions, the new loss function reduces the maximum prediction error for equivalent electromagnetic parameters by 47%. This method significantly improves the prediction accuracy of SCS-Net for measured data, with a maximum improvement of 23.88%. These findings demonstrate that the proposed method enables precise SE prediction and design for composite structures while reducing the number of test samples needed.
基金supported by the National Major Science and Technology Project,China(No.J2019-Ⅳ-0007-0075)the Fundamental Research Funds for the Central Universities,China(No.JKF-20240036)。
文摘To ensure the structural integrity of life-limiting component of aeroengines,Probabilistic Damage Tolerance(PDT)assessment is applied to evaluate the failure risk as required by airworthiness regulations and military standards.The PDT method holds the view that there exist defects such as machining scratches and service cracks in the tenon-groove structures of aeroengine disks.However,it is challenging to conduct PDT assessment due to the scarcity of effective Probability of Detection(POD)model and anomaly distribution model.Through a series of Nondestructive Testing(NDT)experiments,the POD model of real cracks in tenon-groove structures is constructed for the first time by employing the Transfer Function Method(TFM).A novel anomaly distribution model is derived through the utilization of the POD model,instead of using the infeasible field data accumulation method.Subsequently,a framework for calculating the Probability of Failure(POF)of the tenon-groove structures is established,and the aforementioned two models exert a significant influence on the results of POF.
基金support from the National Natural Science Foundation of China(22268025,52473083,and 22475176)Key Research and Development Program of Yunnan Province(202403AP140036)+2 种基金Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)Applied Basic Research Program of Yunnan Province(202201AT070115 and 202201BE070001-031)supported by the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57).
文摘The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.
文摘Taking a widely contaminated yet abundant waste,such as poultry feathers,and extracting keratin from this struc-ture appears to be a real challenge whenever the preservation of the secondary structure of the protein is desired.This process would allow exploiting it in ways(e.g.,in the biomedicalfield)that are inspired by a structure that is primarily designed forflight,therefore capable specifically of withstandingflexure and lateral buckling,also with very low thicknesses.The preservation of the structure is based on disulfide crosslinks,and it is offered with pre-ference by some chemical treatments,mainly those based on ionic liquid and on a reduction process.However,the degree of preservation cannot always be precisely assessed;however,beyond chemical characterization,the forma-tion of homogeneous gels can also suggest that the process was successful in this sense.An extraction respectful of nature’s intentions,considering that the secondary structure builds up according to the very function of the feath-ers in the animal,can be deemed to be biomimetic.In particular,biomimetic extractions comply with the very characteristics the protein was designed for to serve in the specific environmental and mechanical situation in which it is inserted.This review tries to elucidate in which cases this aim is achieved and for which specific appli-cations a chicken feather keratin that has preserved its secondary structure can be suited.
基金financially supported by the National Natural Science Foundation of China(Nos.52233001,51927805,and 52173110)the Innovation Program of Shanghai Municipal Education Commission(No.2023ZKZD07)the Shanghai Rising-Star Program(No.22QA1401200)。
文摘Cholesteric liquid crystals(CLCs)exhibit unique helical superstructures that selectively reflect circularly polarized light,enabling them to dynamically respond to environmental changes with tunable structural colors.This dynamic color-changing capability is crucial for applications that require adaptable optical properties,positioning CLCs as key materials in advanced photonic technologies.This review focuses on the mechanisms of dynamic color tuning in CLCs across various forms,including small molecules,cholesteric liquid crystal elastomers(CLCEs),and cholesteric liquid crystal networks(CLCNs),and emphasizes the distinct responsive coloration each structure provides.Key developments in photochromic mechanisms based on azobenzene,dithienylethene,and molecular motor switches,are discussed for their roles in enhancing the stability and tuning range of CLCs.We examine the color-changing behaviors of CLCEs under mechanical stimuli and CLCNs under swelling,highlighting the advantages of each form.Following this,applications of dynamic color-tuning CLCs in information encryption,adaptive camouflage,and smart sensing technologies are explored.The review concludes with an outlook on current challenges and future directions in CLC research,particularly in biomimetic systems and dynamic photonic devices,aiming to broaden their functional applications and impact.
基金the financial support provided by the National Natural Science Foundation of China(No.51932005)the Liaoning Revitalization Talents Program(No.XLYC1807175)+1 种基金the Development Plan of Science and Technology of Jilin Province,China(YDZJ202301ZYTS280)the Natural Science Foundation of Jilin Province(YDZJ202401316ZYTS)。
文摘Lithium-sulfur(Li-S)chemistry reaction opens a new battery era with high energy density;meanwhile,multiple electrons migration leads to the complex phase transition of sulfur species.To manipulate the binding strength of multiple key intermediates more efficiently,the bimetallic TiVC MXene is utilized to realize multi-dimensional catalysis.Based on the macroscopic three-dimensional(3D)structure using two-dimensional(2D)MXene architecture,electron conductivity and sulfur utilization are improved.Microscopically,Ti-V catalytic systems regulate multiple reaction intermediates through intermetallic synergies customized surface properties and atomic scale coordination,thereby improving electronic and ionic conductivity.In-situ Raman spectroscopy and electrochemical analysis show that the conversion rate of polysulfides was accelerated during the charge-discharge process.The Ti-V interaction exhibits unique catalytic activity and regulates multiple continuous processes of sulfur species phase transformation,which are essential for the excellent energy performance of Li-S batteries.This study not only clarifies the catalytic mechanism of Ti-V at different dimensions but also proposes a promising strategy for the design of advanced catalytic systems in energy storage technology.
基金supported by the National Key R&D Program of China(Grant No.2021YFC2501700).
文摘The current artificial bone is unable to accurately replicate the inhomogeneity and anisotropy of human cancellous bone.To address this issue,we proposed a personalized approach based on clinical CT images to design mechanical equivalent porous structures for artificial femoral heads.Firstly,supported by Micro and clinical CT scans of 21 bone specimens,the anisotropic mechanical parameters of human cancellous bone in the femoral head were characterized using clinical CT values(Hounsfield unit).After that,the equivalent porous structure of cancellous bone was designed based on the gyroid surface,the influence of its degree of anisotropy and volume fraction on the macroscopic mechanical parameters was investigated by finite element analysis.Furthermore,a mapping relationship between CT values and the porous structure was established by jointly solving the mechanical parameters of the porous structure and human cancellous bone,allowing the design of personalized gradient porous structures based on clinical CT images.Finally,to verify the mechanical equivalence,implant press-in tests were conducted on 3D-printed artificial femoral heads and human femoral heads,the influence of the porous structure’s cell size in bone-implant interaction problems was also explored.Results showed that the minimum deviations of press-in stiffness(<15%)and peak load(<5%)both occurred when the cell size was 20%to 30%of the implant diameter.In conclusion,the designed porous structure can replicate the human cancellous bone-implant interaction at a high level,indicating its effectiveness in optimizing the mechanical performance of 3D-printed artificial femoral head.
基金supported by the Key Laboratory Fund of National Key Laboratory of Science and Technology on High-strength Structural Materials(Nos.412130024,623020031)the Pre-research Fund(No.412130024).
文摘The strength improvement in the heat-treatable Al-Zn-Mg-Cu alloys is generally achieved by increasing the volume fraction of nanoprecipitates and reducing the grain size.However,utilizing one of them usu-ally leads to a drastic decrease in ductility.Herein,we architect a hierarchical microstructure integrating bimodal grain structures,nanoprecipitates,and hard-brittle coarse particles wrapped by ductility coarse grain(CG)bands via conventional cold rolling(CR)deformation and heat treatment methods to break the strength-ductility dilemma in the Al-8.89Zn-1.98Mg-2.06Cu-0.12Zr-0.05Sc-0.05Hf(wt.%)alloy.The results reveal that the coupling of high-volume fraction(∼1.2%)nanoprecipitates,∼52%narrow CG bands,and most coarse particles encapsulated by CG bands contribute to the 45%CR sample with outstanding over-all mechanical properties(a tensile strength of 655 MPa,a yield strength of 620 MPa,and an elongation of 15.5%).Microstructure-based strength analysis confirms that the high strength relates to a trade-offbetween the hierarchical features,namely high-volume fraction nanoprecipitates to counterbalance the strength loss caused by grain coarsening.The excellent ductility is due to the introduction of medium CG content with a narrow width that can trigger a cross-scale strain distribution during plastic deforma-tion,suppressing the catastrophic failure in the fine grain(FG)regions and facilitating the dimple fracture along the CG bands.This study proposes a feasible approach for tailoring hierarchical microstructures in Al-Zn-Mg-Cu alloys to achieve a superior strength-ductility combination.
