The synthesis, properties and dispersion mechanism of sulphonated acetone-formaldehyde superplasticizer （SAF） were presented. This superplasticizer was synthesized by the reaction among acetone, formaldehyde, sodium...The synthesis, properties and dispersion mechanism of sulphonated acetone-formaldehyde superplasticizer （SAF） were presented. This superplasticizer was synthesized by the reaction among acetone, formaldehyde, sodium sulfite and pyrosulfite. The structure and property were respectively characterized by IR and surface tension measurement. Performance of SAF in cement was evaluated by paste flow as well as heat calorimetry. The dispersion mechanism was identified via adsorption and zeta potential measurement. The results show that cement paste mixed with SAF shows good fluidity. SAF exerts little retarding effect on cement paste and it behaves like a typical polycondensate superplasticizer. The main dispersion mechanism of SAF is attributed to electrostatic repulsion.展开更多
A IAS degradation strain with high resistance, which could take linear alkylbenzene sulphonate （LAS） as only carton origin for growth, was isolated from the drain canal of Hangao Detergent Plant of Xuzhou. The chara...A IAS degradation strain with high resistance, which could take linear alkylbenzene sulphonate （LAS） as only carton origin for growth, was isolated from the drain canal of Hangao Detergent Plant of Xuzhou. The characteristic of its degradation was researched and the results showed that the optimum conditions of this strain for degrading LAS were 30℃, pH 6.0, 150 ml solution in 500 ml triangle vase, 120 r/min, LAS concentration of 200 - 600 mg/L. The growth amount of the bacteria were up to 0. 443 （ OD400 ） and the degrading rate was up to 89.4%. The ability of the bacterium to degrade LAS could be as high as concentration of 1 200 mg/L.展开更多
[Objective] The aim was to identify the mutants of millet Changnong35 induced by different concentrations of EMS, so as to construct a millet mutant library. [Method] Foxtail millet cultivar Changnong35 which is widel...[Objective] The aim was to identify the mutants of millet Changnong35 induced by different concentrations of EMS, so as to construct a millet mutant library. [Method] Foxtail millet cultivar Changnong35 which is widely used in agricultural production, was treated with 0.8% and 1.0% EMS; and then seven traits of mutants were investigated analyzed, to classify the mutants into different groups. [Result] 282 mutants in the M1 generation related to plant type were obtained, of which, 100 mutant plants treated with 0.8% EMS can be divided into 10 groups; 182 mutant plants obtained by using 1.0% EMS can be divided into 17 groups. The analysis results of the mature plant type traits of the M1 Generation showed that, plant height, diameter of stem under spike, diameter of the first internode under spike and internode number of the mutants treated with 1.0% EMS were significantly different from those of control, while those of mutants treated with 0.8% EMS did not show significant difference from those of control. [Conclusion] The inducing with 1.0% EMS was more conducive to obtain a large number and different types of mutants from Changnong35.展开更多
Recently, functional molecules such as Polydopamine(PDA), Hyaluronic Acid(HA) and heparin have been widely studied in the field of surface modification of magnesium(Mg) alloy stents for better degradation behavior and...Recently, functional molecules such as Polydopamine(PDA), Hyaluronic Acid(HA) and heparin have been widely studied in the field of surface modification of magnesium(Mg) alloy stents for better degradation behavior and biocompatibility, but their further application is limited by undesirable anticoagulant function, uncontrollable degradation and easy bleeding, respectively.Regarding to this consideration, a magnesium Fluoride/Polydopamine/Sulphonated hyaluronic acid(Mg F2/PDA/S-HA) composite coating was successfully prepared by applying S-HA with sulfur content of 9.71 wt% on the surface of ZE21B alloy in this study. The results showed that the composite coating with a unique mesh structure not only inherited the anticoagulant effect of sulfonic acid group and the excellent cyto-compatibility of S-HA with high sulfur content, but also significantly improved the corrosion performance of ZE21B alloy.These results indicate a great application potential of the composite coating in the field of cardiovascular biomaterials.展开更多
Despite the advent of biological products, such as anti-tumor necrosis factor-α monoclonal antibodies (infliximab and adalimumab), for treatment of moderate to severe cases of inflammatory bowel disease (I...Despite the advent of biological products, such as anti-tumor necrosis factor-α monoclonal antibodies (infliximab and adalimumab), for treatment of moderate to severe cases of inflammatory bowel disease (IBD), most patients depend upon aminosalicylates as the conventional treatment option. In recent years, the increased knowledge of complex pathophysiological processes underlying IBD has resulted in development of a number of newer pharmaceutical agents like low-molecular-weight heparin, omega-3 fatty acids, probiotics and innovative formulations such as high-dose, once-daily multi-matrix mesalamine, which are designed to minimize the inflammatory process through inhibition of different targets. Optimization of delivery of existing drugs to the colon using the prodrug approach is another attractive alternative that has been utilized and commercialized for 5-aminosalicylic acid (ASA) in the form of sulfasalazine, balsalazide, olsalazine and ipsalazine, but rarely for its positional isomer 4-ASA - a well-established antitubercular drug that is twice as potent as 5-ASA against IBD, and more specifically, ulcerative colitis. The present review focuses on the complete profile of 4-ASA and its advantages over 5-ASA and colon-targeting prodrugs reported so far for the management of IBD. The review also emphasizes the need for reappraisal of this promising but unexplored entity as a potential treatment option for IBD.展开更多
To study the effects of paraphenylenediamine （PPD） and linear alkylbenzene sulphonate （LAS） alone and in combination on the skin. Methods Forty-eight guinea pigs were divided equally into 4 groups and exposed to P...To study the effects of paraphenylenediamine （PPD） and linear alkylbenzene sulphonate （LAS） alone and in combination on the skin. Methods Forty-eight guinea pigs were divided equally into 4 groups and exposed to PPD （4 mg/kg）, LAS （12 mg/kg） and PPD （4 mg/kg） plus LAS （12 mg/kg） for 30 days. The biochemical parameters such as acid phosphatase, gtutathione-s-transferase, glutathione peroxidase, glutathione, lipid peroxidafion and histamine contents in exposed skin were estimated. The histopathological examination of the exposed skin was also carried out. Results The skin enzymes, lipid peroxidation, and histamine increased while glutathione decreased in skin. The simultaneously exposed group showed additive toxic effects. The histopathological examination showed severe hyperkeratosis, thickening of collagen fibres and vacuolisation of epidermal cells in PPD plus LAS exposed skin. Conclusion The findings of the present study suggest that simultaneous exposure to PPD and LAS has additive toxic effects.展开更多
The influence of petroleum sulphonate (TRS) on interfacial properties and stability of the emulsions formed by formation water and asphaltene, resin and crude model oils from Gudong crude oil was investigated by measu...The influence of petroleum sulphonate (TRS) on interfacial properties and stability of the emulsions formed by formation water and asphaltene, resin and crude model oils from Gudong crude oil was investigated by measurement of interfacial shear viscosity, interfacial tension (IFT) and emulsion stability. With increasing petroleum sulphonate concentration, IFT between the formation water and the asphaltene, resin and crude model oils decreases significantly. The interfacial shear viscosity and emulsion stability of asphaltene and crude model oil system increase for the petroleum sulphonate concentration in the range 0.1% to 0.3%, and decrease slightly when the concentration of the surfactant is 0.5%. There exists a close correlation between the interfacial shear viscosity and the stability of the emulsions formed by asphaltene or crude model oils and petroleum sulphonate solution.The stability of the emulsions is determined by the strength of the interfacial film formed of petroleum sulphonate molecules and the natural interfacial active components in the asphaltene fraction and the crude oil. The asphaltene in the crude oil plays a major role in determining the interfacial properties and the stability of the emulsions.展开更多
In this study, P（St-MAA） seed latex particles were first prepared via soap-free emulsion polymerization of styrene （St） and methacrylic acid （MAA）, then the seed particles were allowed to swell with St at room t...In this study, P（St-MAA） seed latex particles were first prepared via soap-free emulsion polymerization of styrene （St） and methacrylic acid （MAA）, then the seed particles were allowed to swell with St at room temperature, and the P（St-MAA）/P（St- NaSS） core/shell latex particles were then synthesized via seeded emulsion copolymerization of St and sodium styrene sulphonate （NaSS） using AIBN as initiator in the presence of N,N^-methylenebisacrylamide （BAA, water-soluble crosslinker）. Results showed that the polymerization could be carried out smoothly when the ratio of BAA to total monomers was less than 3 mol%, the narrow dispersed P（St-MAA） seed particles with the diameter of 150 nm and the P（St-MAA）/P（St-NaSS） core/shell latexes with the particle size of about 200 nm were synthesized. When the 25/75 mole ratio of NaSS/（St ＋ MAA） and 2 tool% of BAA were used in the seeded emulsion polymerization, the resulted P（St-MAA）/P（St-NaSS） latex product showed a low weight loss after water extraction, and the NaSS unit content in the whole particle and in the shell reached 11.7 mol% and 34.6 mol%, resoectivelv.展开更多
The different oxidation states of sulphur atom play a significant role on functional materials.In this work,a aryl-thioether and its sulphone substituted benzo[c][1,2,5]oxadiazole dyes were synthesized and utilized to...The different oxidation states of sulphur atom play a significant role on functional materials.In this work,a aryl-thioether and its sulphone substituted benzo[c][1,2,5]oxadiazole dyes were synthesized and utilized to determine thiol-containing amino acids.The result of selectivity experiments showed they detected the cysteine and homocysteine under physiological condition with negligible interference from other amino acids.In comparison to the thioether dye,the sulphone-based dye exhibited much faster response time for Cys and Hcy.However,the sulphone restricted its thiol-reactivity and bioimaging performance in living cells.By reducing the oxidation state of sulphur atom,we amazedly found that the sulfoxide-based dye still maintained high selectivity ultrafast response time for Cys/Hcy under physiological condition.It was worth mentioning that it also had high reactivity and good bioimaging performance that sulfone compounds did not have.展开更多
Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such mat...Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such materials, where most of them can be easily prepared. The main objective of this work is to prepare one of the hydrogel types which could be very useful in the agriculture of deserts where plants in dry places require water in order to grow up. There are many places around the world where raining occurs only once or twice a year. There are also places where it does not rain at all. Therefore, hydrogels are required in order to absorb water in large quantities either during raining or irrigation instead of escaping to underground and then eject them to the roots of plants over time as the plants require watering. In this research a hydrogel based on acryl amide, Poly 2-Acrylamide-2-Methyl-1-Propane Sulphonic Acid, (PAMPS) was prepared by using different percentages of a suitable cross-linking agent, Methylene-bis-Acrylamide. The cross-linker content is very important factor affects the rate and amount of absorbed water. The highest amount of absorbed water at 25°C was observed by using 0.6% cross-linking agent based on monomer mass. The temperature of absorbed water and its pH value are also essential factors that affect the rate and the amount of absorbed water and were investigated in this work. The highest amount of absorbed water was recorded at pH = 12 and at 60°C. The amount and the rate of water absorbed by Sodium Polyacrylate Hydrogel were also investigated at 25°C. The agriculture applications of hydrogel based on Sodium Polyacrylate were examined using Fenugreek seeds implanting.展开更多
Surfactants are used for formulation metal working fluids. These fluids are applied to the interface between a cutting tool and the metal working piece to provide friction reduction. In the present paper, poly aromati...Surfactants are used for formulation metal working fluids. These fluids are applied to the interface between a cutting tool and the metal working piece to provide friction reduction. In the present paper, poly aromatic ammonium sulphonate and polyaromatic benzyl triethanolamsonium ethoxylate with 6 ethylene oxide units were synthesized and blended with coupling agent like dodecyl alcohol and oleic acid to produce cutting fluid and evaluate as antiwear. Values of surface tension of these additives were measured in oil phase and consequently CMC was determined for all additives and their mixtures in oil phase. The efficiency of these additives depends on their chemical structure and the presence of ether oxygen brings about the association of the surfactant with metal surface, hence very good wetting properties. The antiwear characteristic of surfactants increases with increasing polar linkages in the aromatic moieties forming chelated and coordinated layer. This is due to the increase in the number of sites to chemisorption on the metal surface. The films formed are highly condensed ring aromatic layered structures. These films provide lower wear and depend on the type of surfactants concentration and sliding speed. The surface of metal was analyzed by SEM/EDX techniques. These studies have led to much clear evidence of the intimate relationship between the chemical structure of the surfactants and their film forming. More confirmation for suggested mechanism was investigated by measuring the area occupied per molecule of the surfactant in oil phase. The results indicate that the sulphonate group is less efficient than ethoxylate group. At the same time, the micelle of surfactants acts as oil dispersant and improves adsorption of oil on the metal surface.展开更多
Two sulphonate-crown ether surfactants （sodium （4＇-dodecanoyldJbenzo-18-crown-6）-4＂（5＂）-sulpho- nate, ammonium （4＇-dodecanoyldibenzo-18-crown-6）-4＂（5＂）-sulphonate） were designed and synthesized via a t...Two sulphonate-crown ether surfactants （sodium （4＇-dodecanoyldJbenzo-18-crown-6）-4＂（5＂）-sulpho- nate, ammonium （4＇-dodecanoyldibenzo-18-crown-6）-4＂（5＂）-sulphonate） were designed and synthesized via a two-step continuous method. The products were purified and characterized by IR. 1H NMR and elemental analysis. The physicochemical properties of the surfactants were studied by fluorescence, conductivity and dynamic light scattering techniques.展开更多
Surfactants are the major active ingredients of laundry detergents. Therefore, special attention should be focused on the treatment and disposal of laundry wastewater. The aim of this study was to characterise the was...Surfactants are the major active ingredients of laundry detergents. Therefore, special attention should be focused on the treatment and disposal of laundry wastewater. The aim of this study was to characterise the wastewater from a commercial laundry over 30 days. Physicochemical analyses were performed, monitoring the content of nitrogen, phosphate, heavy metals, linear alkylbenzene sulphonate (LAS), volatile organic acids and alcohols. The pH was approximately 5.6 and the COD approximately 4800 mg·L-1. The average concentrations of sulphate, sulphide, N-ammoniacal organic nitrogen compounds and heavy metals were below the maximum limit, in accordance with local and national environmental legislation, and the average total suspended solids was 0.08 g·L-1. Among the metals analysed, iron was observed with the highest concentrations (0.037 mg·L-1 and 0.72 mg·L-1). Phosphate was detected in 93% of samples (94.65 mg·L-1 average). LAS was detected in all samples (12.24 mg·L-1 to 1023.7 mg·L-1). Thirty-three different xenobiotic organic compounds were identified in the laundry wastewater with the qualitative screening. The major groups of the compounds were fragrances, preservatives, solvents and some surfactants. Although the characterisation indicated low values for many parameters, this does not eliminate the need for specific treatment before its disposal at the sewage system.展开更多
Poly(styrene-co-sodium styrene sulphonate)(P(St-NaSS)) latex particles were prepared using the mixture of ethanol and water as continuous phase in the presence of surfactant by dispersion--emulsion combined polymeriza...Poly(styrene-co-sodium styrene sulphonate)(P(St-NaSS)) latex particles were prepared using the mixture of ethanol and water as continuous phase in the presence of surfactant by dispersion--emulsion combined polymerization.The influence of recipes on polymerization process as well as the content of sulphonate group in the purified products was investigated.Results showed that the copolymerization could be performed smoothly.When the mole ratio of NaSS/St/divinyl benzene(DVB) was 25/75/2 and the weight ratio ...展开更多
Using bis(p-methoxyphenyl)telluroxide(BMPTO)as the catalyst, phenylsulphonyl acetonitrile condensed easily with aromatic aldehydes at room temperature to give -cyano- ,β-unsaturated sulphones in high yields.
Submicron-sized P（St-NaSS） latexes were prepared via a semi-continuous emulsion copolymerization of styrene （St） and sodium styrene sulphonate （NaSS） in the presence of anionic surfactant, in which NaSS aqueous ...Submicron-sized P（St-NaSS） latexes were prepared via a semi-continuous emulsion copolymerization of styrene （St） and sodium styrene sulphonate （NaSS） in the presence of anionic surfactant, in which NaSS aqueous solution and St were separately dropwise charged into the polymerization system at the same time. The hydrodynamic diameter of the latex particles was measured by dynamic light scattering （DSL） method, and the NaSS unit content of the purified copolymer by water extraction was calculated based on the elementary analysis. Results showed that the copolymerization could be performed smoothly with the monomer conversion more than 96% in the absence of crosslinker, and PNaSS homopolymer could be removed from the latex product by water extraction for 28 h. The weight loss in the water extraction tended to decrease and the NaSS unit content of the purified copolymer tended to increase with the increase of monomer feeding time, and both of them increased with the increase of NaSS/St mole ratio in the charge. The introduction of divinyl benzene （DVB） could decrease the weight loss in the water extraction and increase the NaSS unit content of the purified copolymer. When 25/75 mole ratio of NaSS/St and 11 mol% DVB of total NaSS and St were used in the recipe, and the monomer feeding time was 3 h in copolymerization, the NaSS unit content of the purified copolymer reached 7.31 mol%.展开更多
Some transition metal chelates of two ligands L1 and L2 were prepared and characterized by elemental analysis. The IR and 1H NMR spectra of several chelates of two ligands L1 and L2 showed the involvement of the azo g...Some transition metal chelates of two ligands L1 and L2 were prepared and characterized by elemental analysis. The IR and 1H NMR spectra of several chelates of two ligands L1 and L2 showed the involvement of the azo group in chelation with the transition metaI ions, in most of the studied chelates, and that the two ligands L1 and L2 showed the involvement of the azo group in chelation with the transition metal ions, in most of the studied chelates, and that the two ligands L1 and L2 were coordinated either in the enol or the keto form. IR spetra also showed that Fe(III)-, Ni(II)-, Mn(II)-, VO(II)-L1 and Cu(II)-L2 chelates behaved in a bidentate manner, in contrast with the two (1:1) M:L cobalt chelates with the two ligands are tridentate.TG analysis indicated the presence of three to twelve water molecules of hydration eliminated on heating up to 150℃ and one or two coordinated water molecules removed at 150~180℃.The octahedral structure is proposed fOr all the chelates, except Cu(II)-L2 and Ni(II)-L1 chelates which have square planar geometry, based on their electronic spectra展开更多
Overbased complex sulphonates containing two metals -- sodium and magnesium -- were prepared by using overbased magnesium sulphonate as the starting material. Borated overbased complex sulphonate containing two metals...Overbased complex sulphonates containing two metals -- sodium and magnesium -- were prepared by using overbased magnesium sulphonate as the starting material. Borated overbased complex sulphonate containing two metals was synthesized by reaction of boric acid with the corresponding sulphonate. The total base number （TBN） of overbased complex sulphonates decreased compared with that of magnesium sulphonate, while TBN of borated overbased complex sulphonate further decreased. The detergency, anti-oxidation and extreme pressure performances of overbased complex sulphonates were improved compared with those of overbased magnesium sulphonate; the anti-oxidation and extreme pressure performances of borated overbased complex sulphonates were further improved whereas its detergency was reduced.展开更多
[Objective] This study was conducted to investigate the effect of laundry wastewater on the quality of river water and the dilution purification effect of river water on laundry wastewater. [Method] The effects of lau...[Objective] This study was conducted to investigate the effect of laundry wastewater on the quality of river water and the dilution purification effect of river water on laundry wastewater. [Method] The effects of laundry wastewater on the contents of total nitrogen(TN), total phosphorus(TP), suspended solids(SS), chemical oxygen demand(COD) and linear alkylbenzene sulfonic acid(LAS) were studied in 7 rivers of Shaoxing City. [Result](1) The contents of TN, TP, SS, COD and LAS increased by 92%, 99%, 340%, 351% and 923%, respectively, at the discharging moment of laundry wastewater; and(2) the five pollutional indexes significantly decreased over time, and especially 2 h after the discharge of laundry wastewater, compared with former the discharge of laundry wastewater, the contents of TN, TP, COD and LAS increased by 6%, 11%, 9% and13%, respectively,while the contents of SS still increased by 76%, i.e., SS required a longer time to achieve self-purification. [Conclusion] Laundry wastewater has some influence on thequality of river water, and the self-purification function of river water could effectively remove pollutants.展开更多
基金Funded by the Western Region Traffic Construction Technology Program of the Ministry of Communications of China(No.2007319811130)
文摘The synthesis, properties and dispersion mechanism of sulphonated acetone-formaldehyde superplasticizer （SAF） were presented. This superplasticizer was synthesized by the reaction among acetone, formaldehyde, sodium sulfite and pyrosulfite. The structure and property were respectively characterized by IR and surface tension measurement. Performance of SAF in cement was evaluated by paste flow as well as heat calorimetry. The dispersion mechanism was identified via adsorption and zeta potential measurement. The results show that cement paste mixed with SAF shows good fluidity. SAF exerts little retarding effect on cement paste and it behaves like a typical polycondensate superplasticizer. The main dispersion mechanism of SAF is attributed to electrostatic repulsion.
基金Supported by the Natural Science Foundation of Xuzhou City(X2004424-1)~~
文摘A IAS degradation strain with high resistance, which could take linear alkylbenzene sulphonate （LAS） as only carton origin for growth, was isolated from the drain canal of Hangao Detergent Plant of Xuzhou. The characteristic of its degradation was researched and the results showed that the optimum conditions of this strain for degrading LAS were 30℃, pH 6.0, 150 ml solution in 500 ml triangle vase, 120 r/min, LAS concentration of 200 - 600 mg/L. The growth amount of the bacteria were up to 0. 443 （ OD400 ） and the degrading rate was up to 89.4%. The ability of the bacterium to degrade LAS could be as high as concentration of 1 200 mg/L.
基金Supported by Doctoral Fund of Shanxi Academy of Agricultural Sciences for Construction and Application of Mutant Library of Changnong 35 Induced with EMS(YBSJJ1001)Project of Modern Agricultural Industrial Technology System for Millet~~
文摘[Objective] The aim was to identify the mutants of millet Changnong35 induced by different concentrations of EMS, so as to construct a millet mutant library. [Method] Foxtail millet cultivar Changnong35 which is widely used in agricultural production, was treated with 0.8% and 1.0% EMS; and then seven traits of mutants were investigated analyzed, to classify the mutants into different groups. [Result] 282 mutants in the M1 generation related to plant type were obtained, of which, 100 mutant plants treated with 0.8% EMS can be divided into 10 groups; 182 mutant plants obtained by using 1.0% EMS can be divided into 17 groups. The analysis results of the mature plant type traits of the M1 Generation showed that, plant height, diameter of stem under spike, diameter of the first internode under spike and internode number of the mutants treated with 1.0% EMS were significantly different from those of control, while those of mutants treated with 0.8% EMS did not show significant difference from those of control. [Conclusion] The inducing with 1.0% EMS was more conducive to obtain a large number and different types of mutants from Changnong35.
基金funded by the Key Projects of the Joint Fund of the National Natural Science Foundation of China(U1804251)National Key Research and Development Program of China (2017YFB0702500, 2018YFC1106703, and 2016YFC1102403)Top Doctor Program of Zhengzhou University (grant number 32210475)。
文摘Recently, functional molecules such as Polydopamine(PDA), Hyaluronic Acid(HA) and heparin have been widely studied in the field of surface modification of magnesium(Mg) alloy stents for better degradation behavior and biocompatibility, but their further application is limited by undesirable anticoagulant function, uncontrollable degradation and easy bleeding, respectively.Regarding to this consideration, a magnesium Fluoride/Polydopamine/Sulphonated hyaluronic acid(Mg F2/PDA/S-HA) composite coating was successfully prepared by applying S-HA with sulfur content of 9.71 wt% on the surface of ZE21B alloy in this study. The results showed that the composite coating with a unique mesh structure not only inherited the anticoagulant effect of sulfonic acid group and the excellent cyto-compatibility of S-HA with high sulfur content, but also significantly improved the corrosion performance of ZE21B alloy.These results indicate a great application potential of the composite coating in the field of cardiovascular biomaterials.
文摘Despite the advent of biological products, such as anti-tumor necrosis factor-α monoclonal antibodies (infliximab and adalimumab), for treatment of moderate to severe cases of inflammatory bowel disease (IBD), most patients depend upon aminosalicylates as the conventional treatment option. In recent years, the increased knowledge of complex pathophysiological processes underlying IBD has resulted in development of a number of newer pharmaceutical agents like low-molecular-weight heparin, omega-3 fatty acids, probiotics and innovative formulations such as high-dose, once-daily multi-matrix mesalamine, which are designed to minimize the inflammatory process through inhibition of different targets. Optimization of delivery of existing drugs to the colon using the prodrug approach is another attractive alternative that has been utilized and commercialized for 5-aminosalicylic acid (ASA) in the form of sulfasalazine, balsalazide, olsalazine and ipsalazine, but rarely for its positional isomer 4-ASA - a well-established antitubercular drug that is twice as potent as 5-ASA against IBD, and more specifically, ulcerative colitis. The present review focuses on the complete profile of 4-ASA and its advantages over 5-ASA and colon-targeting prodrugs reported so far for the management of IBD. The review also emphasizes the need for reappraisal of this promising but unexplored entity as a potential treatment option for IBD.
文摘To study the effects of paraphenylenediamine （PPD） and linear alkylbenzene sulphonate （LAS） alone and in combination on the skin. Methods Forty-eight guinea pigs were divided equally into 4 groups and exposed to PPD （4 mg/kg）, LAS （12 mg/kg） and PPD （4 mg/kg） plus LAS （12 mg/kg） for 30 days. The biochemical parameters such as acid phosphatase, gtutathione-s-transferase, glutathione peroxidase, glutathione, lipid peroxidafion and histamine contents in exposed skin were estimated. The histopathological examination of the exposed skin was also carried out. Results The skin enzymes, lipid peroxidation, and histamine increased while glutathione decreased in skin. The simultaneously exposed group showed additive toxic effects. The histopathological examination showed severe hyperkeratosis, thickening of collagen fibres and vacuolisation of epidermal cells in PPD plus LAS exposed skin. Conclusion The findings of the present study suggest that simultaneous exposure to PPD and LAS has additive toxic effects.
基金国家重点基础研究发展计划(973计划)，an International Cooperation Research Program
文摘The influence of petroleum sulphonate (TRS) on interfacial properties and stability of the emulsions formed by formation water and asphaltene, resin and crude model oils from Gudong crude oil was investigated by measurement of interfacial shear viscosity, interfacial tension (IFT) and emulsion stability. With increasing petroleum sulphonate concentration, IFT between the formation water and the asphaltene, resin and crude model oils decreases significantly. The interfacial shear viscosity and emulsion stability of asphaltene and crude model oil system increase for the petroleum sulphonate concentration in the range 0.1% to 0.3%, and decrease slightly when the concentration of the surfactant is 0.5%. There exists a close correlation between the interfacial shear viscosity and the stability of the emulsions formed by asphaltene or crude model oils and petroleum sulphonate solution.The stability of the emulsions is determined by the strength of the interfacial film formed of petroleum sulphonate molecules and the natural interfacial active components in the asphaltene fraction and the crude oil. The asphaltene in the crude oil plays a major role in determining the interfacial properties and the stability of the emulsions.
文摘In this study, P（St-MAA） seed latex particles were first prepared via soap-free emulsion polymerization of styrene （St） and methacrylic acid （MAA）, then the seed particles were allowed to swell with St at room temperature, and the P（St-MAA）/P（St- NaSS） core/shell latex particles were then synthesized via seeded emulsion copolymerization of St and sodium styrene sulphonate （NaSS） using AIBN as initiator in the presence of N,N^-methylenebisacrylamide （BAA, water-soluble crosslinker）. Results showed that the polymerization could be carried out smoothly when the ratio of BAA to total monomers was less than 3 mol%, the narrow dispersed P（St-MAA） seed particles with the diameter of 150 nm and the P（St-MAA）/P（St-NaSS） core/shell latexes with the particle size of about 200 nm were synthesized. When the 25/75 mole ratio of NaSS/（St ＋ MAA） and 2 tool% of BAA were used in the seeded emulsion polymerization, the resulted P（St-MAA）/P（St-NaSS） latex product showed a low weight loss after water extraction, and the NaSS unit content in the whole particle and in the shell reached 11.7 mol% and 34.6 mol%, resoectivelv.
基金the National Natural Science Foundation of China(Nos.21676113,21402057,21772054,21472059)Distinguished Young Scholar of Hubei Province(No.2018CFA079)+5 种基金Youth Chen-Guang Project of Wuhan(No.2016070204010098)the 111 Project B17019the Ministry-Province Jointly Constructed Base for State Key Lab-Shenzhen Key Laboratory of Chemical Biology(Shenzhen),the State Key Laboratory of Materials-Oriented Chemical Engineering(No.KL17-10)Open Project Fund of Key Laboratory of Natural Resources of Changbai Mountain&Functional Molecules(Yanbian University),Ministry of Education(No.NRFM201701)the Foundation of Key Laboratory of Synthetic and Biological Colloids,Ministry of Education,Jiangnan University(No.JDSJ2017-07)the Self-determined Research Funds of CCNU from the Colleges’Basic Research and Operation of MOE(No.CCNU18TS012)。
文摘The different oxidation states of sulphur atom play a significant role on functional materials.In this work,a aryl-thioether and its sulphone substituted benzo[c][1,2,5]oxadiazole dyes were synthesized and utilized to determine thiol-containing amino acids.The result of selectivity experiments showed they detected the cysteine and homocysteine under physiological condition with negligible interference from other amino acids.In comparison to the thioether dye,the sulphone-based dye exhibited much faster response time for Cys and Hcy.However,the sulphone restricted its thiol-reactivity and bioimaging performance in living cells.By reducing the oxidation state of sulphur atom,we amazedly found that the sulfoxide-based dye still maintained high selectivity ultrafast response time for Cys/Hcy under physiological condition.It was worth mentioning that it also had high reactivity and good bioimaging performance that sulfone compounds did not have.
文摘Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such materials, where most of them can be easily prepared. The main objective of this work is to prepare one of the hydrogel types which could be very useful in the agriculture of deserts where plants in dry places require water in order to grow up. There are many places around the world where raining occurs only once or twice a year. There are also places where it does not rain at all. Therefore, hydrogels are required in order to absorb water in large quantities either during raining or irrigation instead of escaping to underground and then eject them to the roots of plants over time as the plants require watering. In this research a hydrogel based on acryl amide, Poly 2-Acrylamide-2-Methyl-1-Propane Sulphonic Acid, (PAMPS) was prepared by using different percentages of a suitable cross-linking agent, Methylene-bis-Acrylamide. The cross-linker content is very important factor affects the rate and amount of absorbed water. The highest amount of absorbed water at 25°C was observed by using 0.6% cross-linking agent based on monomer mass. The temperature of absorbed water and its pH value are also essential factors that affect the rate and the amount of absorbed water and were investigated in this work. The highest amount of absorbed water was recorded at pH = 12 and at 60°C. The amount and the rate of water absorbed by Sodium Polyacrylate Hydrogel were also investigated at 25°C. The agriculture applications of hydrogel based on Sodium Polyacrylate were examined using Fenugreek seeds implanting.
文摘Surfactants are used for formulation metal working fluids. These fluids are applied to the interface between a cutting tool and the metal working piece to provide friction reduction. In the present paper, poly aromatic ammonium sulphonate and polyaromatic benzyl triethanolamsonium ethoxylate with 6 ethylene oxide units were synthesized and blended with coupling agent like dodecyl alcohol and oleic acid to produce cutting fluid and evaluate as antiwear. Values of surface tension of these additives were measured in oil phase and consequently CMC was determined for all additives and their mixtures in oil phase. The efficiency of these additives depends on their chemical structure and the presence of ether oxygen brings about the association of the surfactant with metal surface, hence very good wetting properties. The antiwear characteristic of surfactants increases with increasing polar linkages in the aromatic moieties forming chelated and coordinated layer. This is due to the increase in the number of sites to chemisorption on the metal surface. The films formed are highly condensed ring aromatic layered structures. These films provide lower wear and depend on the type of surfactants concentration and sliding speed. The surface of metal was analyzed by SEM/EDX techniques. These studies have led to much clear evidence of the intimate relationship between the chemical structure of the surfactants and their film forming. More confirmation for suggested mechanism was investigated by measuring the area occupied per molecule of the surfactant in oil phase. The results indicate that the sulphonate group is less efficient than ethoxylate group. At the same time, the micelle of surfactants acts as oil dispersant and improves adsorption of oil on the metal surface.
基金supported by the National Natural Science Foundation of China (Nos. 91226112 and 20871009)
文摘Two sulphonate-crown ether surfactants （sodium （4＇-dodecanoyldJbenzo-18-crown-6）-4＂（5＂）-sulpho- nate, ammonium （4＇-dodecanoyldibenzo-18-crown-6）-4＂（5＂）-sulphonate） were designed and synthesized via a two-step continuous method. The products were purified and characterized by IR. 1H NMR and elemental analysis. The physicochemical properties of the surfactants were studied by fluorescence, conductivity and dynamic light scattering techniques.
基金The authors gratefully acknowledge the Laboratório de Processos Biológicos-LPB/EESC/USP Sao Paulo,Research Foundation(FAPESP)(No 2010/11531-9)the National Council for Scientific and Technological Development for their financial support.
文摘Surfactants are the major active ingredients of laundry detergents. Therefore, special attention should be focused on the treatment and disposal of laundry wastewater. The aim of this study was to characterise the wastewater from a commercial laundry over 30 days. Physicochemical analyses were performed, monitoring the content of nitrogen, phosphate, heavy metals, linear alkylbenzene sulphonate (LAS), volatile organic acids and alcohols. The pH was approximately 5.6 and the COD approximately 4800 mg·L-1. The average concentrations of sulphate, sulphide, N-ammoniacal organic nitrogen compounds and heavy metals were below the maximum limit, in accordance with local and national environmental legislation, and the average total suspended solids was 0.08 g·L-1. Among the metals analysed, iron was observed with the highest concentrations (0.037 mg·L-1 and 0.72 mg·L-1). Phosphate was detected in 93% of samples (94.65 mg·L-1 average). LAS was detected in all samples (12.24 mg·L-1 to 1023.7 mg·L-1). Thirty-three different xenobiotic organic compounds were identified in the laundry wastewater with the qualitative screening. The major groups of the compounds were fragrances, preservatives, solvents and some surfactants. Although the characterisation indicated low values for many parameters, this does not eliminate the need for specific treatment before its disposal at the sewage system.
文摘Poly(styrene-co-sodium styrene sulphonate)(P(St-NaSS)) latex particles were prepared using the mixture of ethanol and water as continuous phase in the presence of surfactant by dispersion--emulsion combined polymerization.The influence of recipes on polymerization process as well as the content of sulphonate group in the purified products was investigated.Results showed that the copolymerization could be performed smoothly.When the mole ratio of NaSS/St/divinyl benzene(DVB) was 25/75/2 and the weight ratio ...
文摘Using bis(p-methoxyphenyl)telluroxide(BMPTO)as the catalyst, phenylsulphonyl acetonitrile condensed easily with aromatic aldehydes at room temperature to give -cyano- ,β-unsaturated sulphones in high yields.
文摘Submicron-sized P（St-NaSS） latexes were prepared via a semi-continuous emulsion copolymerization of styrene （St） and sodium styrene sulphonate （NaSS） in the presence of anionic surfactant, in which NaSS aqueous solution and St were separately dropwise charged into the polymerization system at the same time. The hydrodynamic diameter of the latex particles was measured by dynamic light scattering （DSL） method, and the NaSS unit content of the purified copolymer by water extraction was calculated based on the elementary analysis. Results showed that the copolymerization could be performed smoothly with the monomer conversion more than 96% in the absence of crosslinker, and PNaSS homopolymer could be removed from the latex product by water extraction for 28 h. The weight loss in the water extraction tended to decrease and the NaSS unit content of the purified copolymer tended to increase with the increase of monomer feeding time, and both of them increased with the increase of NaSS/St mole ratio in the charge. The introduction of divinyl benzene （DVB） could decrease the weight loss in the water extraction and increase the NaSS unit content of the purified copolymer. When 25/75 mole ratio of NaSS/St and 11 mol% DVB of total NaSS and St were used in the recipe, and the monomer feeding time was 3 h in copolymerization, the NaSS unit content of the purified copolymer reached 7.31 mol%.
文摘Some transition metal chelates of two ligands L1 and L2 were prepared and characterized by elemental analysis. The IR and 1H NMR spectra of several chelates of two ligands L1 and L2 showed the involvement of the azo group in chelation with the transition metaI ions, in most of the studied chelates, and that the two ligands L1 and L2 showed the involvement of the azo group in chelation with the transition metal ions, in most of the studied chelates, and that the two ligands L1 and L2 were coordinated either in the enol or the keto form. IR spetra also showed that Fe(III)-, Ni(II)-, Mn(II)-, VO(II)-L1 and Cu(II)-L2 chelates behaved in a bidentate manner, in contrast with the two (1:1) M:L cobalt chelates with the two ligands are tridentate.TG analysis indicated the presence of three to twelve water molecules of hydration eliminated on heating up to 150℃ and one or two coordinated water molecules removed at 150~180℃.The octahedral structure is proposed fOr all the chelates, except Cu(II)-L2 and Ni(II)-L1 chelates which have square planar geometry, based on their electronic spectra
文摘Overbased complex sulphonates containing two metals -- sodium and magnesium -- were prepared by using overbased magnesium sulphonate as the starting material. Borated overbased complex sulphonate containing two metals was synthesized by reaction of boric acid with the corresponding sulphonate. The total base number （TBN） of overbased complex sulphonates decreased compared with that of magnesium sulphonate, while TBN of borated overbased complex sulphonate further decreased. The detergency, anti-oxidation and extreme pressure performances of overbased complex sulphonates were improved compared with those of overbased magnesium sulphonate; the anti-oxidation and extreme pressure performances of borated overbased complex sulphonates were further improved whereas its detergency was reduced.
基金Supported by Natural Science Foundation of China(31500321)Scientific Research Foundation of Shaoxing University(20145024)
文摘[Objective] This study was conducted to investigate the effect of laundry wastewater on the quality of river water and the dilution purification effect of river water on laundry wastewater. [Method] The effects of laundry wastewater on the contents of total nitrogen(TN), total phosphorus(TP), suspended solids(SS), chemical oxygen demand(COD) and linear alkylbenzene sulfonic acid(LAS) were studied in 7 rivers of Shaoxing City. [Result](1) The contents of TN, TP, SS, COD and LAS increased by 92%, 99%, 340%, 351% and 923%, respectively, at the discharging moment of laundry wastewater; and(2) the five pollutional indexes significantly decreased over time, and especially 2 h after the discharge of laundry wastewater, compared with former the discharge of laundry wastewater, the contents of TN, TP, COD and LAS increased by 6%, 11%, 9% and13%, respectively,while the contents of SS still increased by 76%, i.e., SS required a longer time to achieve self-purification. [Conclusion] Laundry wastewater has some influence on thequality of river water, and the self-purification function of river water could effectively remove pollutants.
