Acidic-and alkalic-hydrolyses are selective in breaking functional bonds and falling off pharmacological moieties of antibiotics in production wastewater in comparison with advanced oxidation processes.Elevating tempe...Acidic-and alkalic-hydrolyses are selective in breaking functional bonds and falling off pharmacological moieties of antibiotics in production wastewater in comparison with advanced oxidation processes.Elevating temperature can accelerate hydrolytic kinetics and improve efficiency.In this work,magnetic sulfonated polypropylene resin(Fe_(3)O_(4)@PS-S)composites were reported for acidic-thermal hydrolysis of tylosin by employing the acidic feature of sulfonic group,the dielectric effect of resin,and the magnetic-loss effect of magnetite under microwave irradiation.As observed,a rapid and complete mitigation 100 mg/L of tylosin was achieved within 15 min by the catalysts.Acidic cleavage of tylosin was fulfilled by sulfonic groups in the composites,and microwave thermal accelerated the hydrolysis reactions due to the dielectric and magnetic-loss effects.Differentiating the dielectric and magnetic-loss effects through electromagnetic analyses indicated that the latter contributed more in converting microwave energy to heat.The interactions under multiple operational conditions were quantitatively fitted using the Behnajady model and visually demonstrated,which indicated that a synergic effect of microwave thermal-and acidichydrolyses contributed to the efficient mitigation of tylosin.The transformation products were identified and the pathways were supposed.Cleaving deoxyaminosugars groups and destructing lactone structures led to reduced antibacterial potential and toxicity reduction.The acute toxicity of tylosin and transformation products to fish,daphnia,and green algae were all classified as non-toxic.This work suggested that this synergistic acid-thermal hydrolytic method is attractive and promising in pretreating tylosin production wastewater in field.展开更多
The sulfonated poly(α-methyl styrene-b-isobutylene-b-α-methyl styrene)copolymers(S-ASIBS)with the average molar percentage of sulfonic acid(-SO_(3)H)groups(SP)ranging from 3.6 mol%to 14.3 mol%could be synthesized by...The sulfonated poly(α-methyl styrene-b-isobutylene-b-α-methyl styrene)copolymers(S-ASIBS)with the average molar percentage of sulfonic acid(-SO_(3)H)groups(SP)ranging from 3.6 mol%to 14.3 mol%could be synthesized by sulfonation of ASIBS with acetyl sulfate.The hydrophilic ionic channels were generated for proton exchange membranes(PEMs)by ion aggregation of-SO_(3)H groups and microphase separation between hydrophobic polyisobutylene and hydrophilic sulfonated poly(α-methyl styrene)segments in S-ASIBS.The proton transport ability was improved while oxidative stability was decreased by increasing SP in S-ASIBS.The appropriate SP of about 12.7 mol%in S-ASIBS provides the available PEMs with high proton transport ability,low methanol permeability and good oxidative stability.The absence of active tertiary hydrogen atoms along S-ASIBS copolymer chains avoids their attack by peroxy radicals.The residual rates of weight(RW)and proton conductivity(Rσ)of S-ASIBS-12.7 membrane after oxidation treatment for 916 h were 84.3%and 88.1%respectively,near to those of commercial Nafion 117(RW=87.9%,Rσ=90.3%).The membrane electrode assembly(MEA)could be prepared by using various S-ASIBS as PEMs for direct methanol fuel cell.The single cell with S-ASIBS-12.7 MEA behaves high performance of open circuit voltage(OCV)of 548 mV and peak power density(Pmax)of 36.1 mW·cm^(-2),which is similar to those of Nafion 117(OCV=506 mV,P_(max)=35.6 mW·cm^(-2)).To the best of our knowledge,this is the first example of advanced S-ASIBS membrane with high proton conductivity,excellent fuel barrier property and remarkable oxidative stability for promising PEMs.展开更多
A novel integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide(KCuFC/SPSG)was used for selectively extracting rubidium ion(Rb^(+))from brine.To form KCuFC/SPSG,the precursor film of sulfonate...A novel integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide(KCuFC/SPSG)was used for selectively extracting rubidium ion(Rb^(+))from brine.To form KCuFC/SPSG,the precursor film of sulfonated polysulfone/graphene(SPSG)was synthesized by phase conversion process,which was alternately immersed in 0.1 mol·L^(-1)CuSO_(4)/K_(4)[Fe(CN)_(6)]by in-situ adsorption coupled co-precipitation method.Various data such as nuclear magnetic resonance spectrometer,Fourier transform infrared spectroscope,X-ray photoelectron spectroscope,X-ray diffraction,scanning electron microscope,and energy dispersive spectroscopy all verified that abundant KCuFC were uniformly located on the film.The resulting KCuFC/SPSG was used in film separation system.As the solution was fed into the system,the Rb^(+)could be selectively adsorption by KCuFC/SPSG.After the saturation adsorption,0.5 mol·L^(-1)NH_(4)Cl/HCl was fed into the film cell,Rb^(+)could be quickly desorbed by ion-exchange between Rb^(+)and NH_(4)^(+)in the lattice of KCuFC.The purpose of separating and recovering Rb^(+)from the brine can be achieved after the repeated operation.The effects of pH,adsorption time,and interferential ions on the adsorption capacity of Rb^(+)were investigated by batch experiments.The adsorption behavior fits the pseudo-second order kinetic process,while KCuFC has a higher adsorption capacity(Langmuir maximum sorption 165.4 mg·g^(-1)).In addition,KCuFC/SPSG shows excellent selectivity for Rb^(+)even in complex brine systems.KCuFC/SPSG could maintain 93.5%extraction efficiency after five adsorption/desorption cycles.展开更多
A sulfonated poly（ether ether ketone） （SPEEK） membrane with fairly high degree of sulfonation （DS） swells excessively and even dissolves at high temperature. To solve these problems, sulfonated phenolphthalein p...A sulfonated poly（ether ether ketone） （SPEEK） membrane with fairly high degree of sulfonation （DS） swells excessively and even dissolves at high temperature. To solve these problems, sulfonated phenolphthalein poly（ether sulfone） （SPES-C, DS= 53.7%） is blended with the SPEEK matrix （DS= 55.1%, 61.7%） to prepare SPEEKJSPES-C blend membrane. The decrease in swelling degree and methanol permeability of the membrane is dose-dependent. Pure SPEEK （DS = 61.7%） membrane dissolves completely in water at 70℃, whereas the swelling degree of the SPEEK （DS = 61.7%）/SPES-C （40%, by mass） membrane is 29.7% at 80℃. From room temperature to 80℃, the methanol permeability of all SPEEK （DS = 55.1%）/SPES-C blend membranes is about one order of magnitude lower than that of Nafion 115. At higher temperature, the addition of SPES-C polymer increases the dimensional stability and greater proton conductivity can be achieved. The SPEEK （DS = 55.1%）/SPES-C （40%, by mass） membrane can withstand temperatures up to 150℃. The proton conductivity of SPEEK （DS = 55.1%）/SPES-C （30%, by mass） membrane approaches 0.16 S·cm^-1, matching that of Nafion 115 at 140℃ and 100% RH, while pure SPEEK （DS = 55.1%） membrane dissolves at 90℃. The SPEEK/SPES-C blend membranes are promising for use in direct methanol fuel cells because of their good dimensional stability, high proton conductivity, and low methanol permeability.展开更多
A series of sulfonated polyimides （SPIs） containing pyridine groups were prepared by direct polycondensation from 1,4,5,8-naphthalenetetracarboxylic dianhydride （NTDA）, 4,4＇-diaminodiphenyl ether-2,2＇-disulfonic...A series of sulfonated polyimides （SPIs） containing pyridine groups were prepared by direct polycondensation from 1,4,5,8-naphthalenetetracarboxylic dianhydride （NTDA）, 4,4＇-diaminodiphenyl ether-2,2＇-disulfonic acid （ODADS） and 4-（4-methoxy）phenyl-2,6-bis（4-aminophenyl）pyridine （DAM）. The resulting copolymers displayed good solubility in common organic solvents. Flexible, transparent, tough membranes were obtained via solution casting. All the films showed high thermal stability with desulfonation temperature over 300℃. They exhibited prominent mechanical properties with Young＇s modulus around 2.0 GPa. High proton conductivity （0.23 S/cm at 100% RH） was also observed. More importantly, the new materials exhibited low water uptake （30 wt%-75 wt% at 80℃） and improved water stability, which were attributed to the acid-base interaction between sulfonic acid and pyridine functional groups.展开更多
A ternary hybrid membrane architecture consisting of sulfonated fluorinated multi-block copolymer （SFMC）, sulfonated （poly ether ether ketone） （SPEEK） and I or 5 wt% graphene oxide （GO） was fabricated through ...A ternary hybrid membrane architecture consisting of sulfonated fluorinated multi-block copolymer （SFMC）, sulfonated （poly ether ether ketone） （SPEEK） and I or 5 wt% graphene oxide （GO） was fabricated through a facile solution casting approach. The simple, but effective monomer sulfonation was performed for SFMC to create compact and rigid hydrophobic backbone structures, while conventional random sulfonation was carried-out for SPEEK. Hydrophilic-hydrophobic-hydrophilic structure of SFMC enhances the compatibility with SPEEK and GO and allows for an unprecedented approach to alter me- chanical strength and proton conductivity of ternary hybrid membrane, as verified from universal test machine （UTM） curves and alternating current （AC） impedance plots. The impact of GO integration on the morphology and roughness of hybrid membrane was scrutinized using field emission scanning electron microscope （FE-SEM） and atomic force microscope （AFM）. Ternary hybrid showed uniform intercalation of GO nanosheets throughout the entire surface of membrane with an increased surface roughness of 8.91 nm. The constructed ternary hybrid membrane revealed excellent water absorption, ion exchange capacity and gas barrier properties, while retaining reasonable dimensional stability. The well-optimized ternary hybrid membrane containing 5 wt% GO revealed a maximum proton conductivity of 111.9 mS/cm, which is higher by a factor of two-fold with respect to that of bare SFMC membrane. The maximum PEMFC power density of 528.07mW/cm2 was yielded by ternary hybrid membrane at a load current density of 1321.1 mA/cm2 when operating the cell at 70 ℃ under 100% relative humidity （RH）. In comparison, a maximum power density of only 182.06 mW/cm2 was exhibited by the bare SFMC membrane at a load current density of 455.56 mA/cm2 under same operating conditions.展开更多
Polyethersulfone(PES) is widely used as biomaterials due to its thermal stability,mechanical strength,and chemical inertness.Nevertheless,their blood compatibility is still not adequate for hemodialysis and blood puri...Polyethersulfone(PES) is widely used as biomaterials due to its thermal stability,mechanical strength,and chemical inertness.Nevertheless,their blood compatibility is still not adequate for hemodialysis and blood purification.In this study,the sulfonated polyethersulfone(SPES) was synthesized through an electrophilic substitution reaction,and PES/SPES blending membranes were prepared.The characterization of the SPES was studied by FTIR.The water adsorption and water contact angle experiments show that the hydrophilicity of PES/SPES blend membrane was improved as for the sulfonate group existing in the SPES.Moreover,PES/SPES blend membrane could effectively reduce bovine serum albumin adsorption and prolong the blood coagulation time compared with the PES membrane,thereby improving blood compatibility.展开更多
Treatment of drilling wastewater from a sulfonated drilling mud system in the Shengli Oilfield, East China, was studied. The wastewater was deeply treated by a chemical coagulationcentrifugal separation-ozone catalyti...Treatment of drilling wastewater from a sulfonated drilling mud system in the Shengli Oilfield, East China, was studied. The wastewater was deeply treated by a chemical coagulationcentrifugal separation-ozone catalytic oxidation combined process. The factors （i.e. pH value, chemical dosage, reaction time, etc.） influencing the treatment effect were investigated, and pH = 7 was determined as optimal for the coagulation; polymeric aluminum chloride （PAC） was selected as the optimal coagulant with a dosage of 18 g/L; cationic polyacrylamide （CPAM） with molecular weight of 8 million was selected as the optimal coagulant aid with an optimum dosage of 8 mg/L; and the optimal condition of catalytic ozonation was found to be a pH of 12 and an oxidation time of 40 min. The results showed that the combined treatment process was effective. The oil content and suspended solids content of the effluent reached the first class discharge standard according to China＇s standard GB 8978-1996 （Integrated Wastewater Discharge Standard） and the chemical oxygen demand （COD） decreased to 195 mg/L from 2.34×10^4 mg/L after coagulation process and ozone oxidation at pH = 12 for 40 min.展开更多
A sulfonated poly（ether ether ketone） （SPEEK） membrane with a fairly high degree of sulfonation （DS） can swell excessively and even dissolve at high temperature. To solve these problems, insolvable functionalize...A sulfonated poly（ether ether ketone） （SPEEK） membrane with a fairly high degree of sulfonation （DS） can swell excessively and even dissolve at high temperature. To solve these problems, insolvable functionalized silica powder with sulfonic acid groups （SiOx-S） was added into the SPEEK matrix （DS = 55.1%） to prepare SPEEK/ SiOx-S composite membranes. The decrease in both the swelling degree and the methanol permeability of the membranes was a dose-dependent result of addition of the SiOx-S powder. Pure SPEEK membrane swelled 52.6% at 80℃, whereas the SPEEK/SiOx-S （15%, by mass） membrane swelled only 27.3% at the same temperature. From room temperature to 80℃, all SPEEK/SPEEK/SiOx-S composite membranes had methanol permeability of about one order of magnitude lower than that ofNafion115. Compared with pure SPEEK membranes, the addition of the SiOx-S powder not only leads to higher proton conductivity, but also increases the dimensional stability at higher temperatures, and greater proton conductivity can be achieved at higher temperature. The SPEEK/SiO4-S （20%, by mass） membrane could withstand temperature up to 145℃, at which in 100% relative humidity （RH） its proton conductivity exceeded slightly that of Nafion 1 15 membrane and reached 0.17 S·cm^-1, while pure SPEEK membrane dissolved at 90℃. The SPEEK/SiOx-S composite membranes are promising for use in direct methanol fuel cells because of their good dimensional stability, high proton conductivity, and low methanol permeability.展开更多
The novel sulfonated polybenzimidazole(sPBI)/amine functionalized titanium dioxide(AFT) composite membrane is devised and studied for its capability of the application of high temperature proton exchange membrane fuel...The novel sulfonated polybenzimidazole(sPBI)/amine functionalized titanium dioxide(AFT) composite membrane is devised and studied for its capability of the application of high temperature proton exchange membrane fuel cells(HT-PEMFCs),unlike the prior low temperature AFT endeavors.The high temperature compatibility was actualized because of the filling of free volumes in the rigid aromatic matrix of the composite with AFT nanoparticles which inhibited segmental motions of the chains and improved its thermal stability.Besides,amine functionalization of TiO2 enhanced their dispersion character in the sPBI matrix and shortened the interparticle separation gap which finally improved the proton transfer after establishing interconnected pathways and breeding more phosphoric acid(PA) doping.In addition,the appeared assembled clusters of AFT flourished a superior mechanical stability.Thus,the optimized sPBI/AFT(10 wt%) showed 65.3 MPa tensile strength;0.084 S·cm^-1 proton conductivity(at 160℃;in anhydrous conditions),28.6% water uptake and PA doping level of 23 mol per sPBI repeat unit.The maximum power density peak for sPBI/AFT-10 met the figure of0.42 W·cm^-2 at 160℃(in dry conditions) under atmospheric pressure with 1.5 and 2.5 stoichiometric flow rates of H2/air.These results affirmed the probable fitting of sPBI/AFT composite for HT-PEMFC applications.展开更多
Sulfonated carbon as a strong and stable solid acid catalyst exhibited excellent catalytic performance in various acid-catalyzed reactions. Here, sulfonated carbon, as catalyst for oxidation reaction, was prepared via...Sulfonated carbon as a strong and stable solid acid catalyst exhibited excellent catalytic performance in various acid-catalyzed reactions. Here, sulfonated carbon, as catalyst for oxidation reaction, was prepared via the carbonization of starch followed by sulfonation with concentrated sulfuric acid. N2 physisorption, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray fluorescence and acid-base titration were used to characterize the obtained materials. The catalytic activity of sulfonated carbon was studied in the oxidation of aldehydes to carboxylic acids using 30 wt% H2O2 as oxidant. This oxidation protocol works well for various aldehydes including aromatic and aliphatic aldehydes. The sulfonated carbon can be recycled for three times without obvious loss of activity.展开更多
The effects of various quinone compounds on the decolorization rates of sulfonated azo dyes by Sphingomonas xenophaga QYY were investigated. The results showed that anthraquinone-2-sulfonate （AQS） was the most effec...The effects of various quinone compounds on the decolorization rates of sulfonated azo dyes by Sphingomonas xenophaga QYY were investigated. The results showed that anthraquinone-2-sulfonate （AQS） was the most effective redox mediator and AQS reduction was the rate-limited step of AQS-mediated decolorization of sulfonated azo dyes. Based on AQS biological toxicity tests, it was assumed that AQS might enter the cells and kill them. In the cytoplasmic extracts from strain QYY, AQS more effectively increased decolorization rates of sulfonated azo dyes than other quinone compounds. In addition, we found a NADH/FMN-dependent AQS reductase using nondenaturing polyacrylamide gel electrophoresis （Native-PAGE）.展开更多
Sulfonated poly（ether ketone）s containing 3,5-dimethyl phthalazinone moieties （SPPEK-DMs） with different degrees of sulfonation （DS） were synthesized via direct polycondensation from 4-（3,5-dimethyl-4-hydroxyph...Sulfonated poly（ether ketone）s containing 3,5-dimethyl phthalazinone moieties （SPPEK-DMs） with different degrees of sulfonation （DS） were synthesized via direct polycondensation from 4-（3,5-dimethyl-4-hydroxyphenyl）-2,3- phthalazinone, 4,4＇-difluorobenzophenone and 3,3＇-disulfonate-4,4＇-difluorobenzophenone. The chemical structure of SPPEK-DMs was characterized by FTIR and 1H-NMR. Thermal stability of SPPEK-DMs was characterized by the thermogravimetric analysis. The membranes prepared from SPPEK-DMs exhibited ion exchange capacities （IEC） ranging from 0.93 mmol.g-1 to 1.86 mmol.g-1. Water uptake, swelling, oxidative stability and methanol permeability of SPPEK- DMs membranes were investigated. SPPEK-DMs membranes exhibited high oxidative stability. The methanol permeability values of SPPEK-DMs membranes were in the range 5.15× 10^-8-6.61×10^-7 cm^2.s-1, which was much lower than those of Nafion117. The proton conductivity of SPPEK-DM40 membranes was 1.1 ×10^-2 S.cm^-1 at 70℃.展开更多
A series of sulfonated polyimide copolymers as novel proton exchange materials were synthesized by the polycondensation of 1,4,5,8-naphthalene-tetracarboxylic dianhydride （NTDA）, sulfonated diamine based on pyridine...A series of sulfonated polyimide copolymers as novel proton exchange materials were synthesized by the polycondensation of 1,4,5,8-naphthalene-tetracarboxylic dianhydride （NTDA）, sulfonated diamine based on pyridine group and diamine containing N-phenyl-1,2,4-triazole moiety. Flexible, transparent and tough membranes with high thermal stability and good mechanical properties were obtained. They exhibited good stability in boiling water and Fenton＇s reagent at 80 ℃. More interestingly, a nonlinear relationship between proton conductivities of the resulting membranes and the degree of sulfonation （DS） was observed. The membrane with 50% DS exhibited the maximum proton conductivity, which was due to the combinational contributions of sulfonic acid and N-pheny-1,2,4-triazole groups. Thus, the N-phenyl-l,2,4- triazole moiety in this study not only can depress water absorption but also increase proton conductivity, especially at low DS.展开更多
A carbon-based sulfonated catalyst was prepared by direct sulfonation and carbonization （in moderate conditions：200 ＆#176;C, 12 h） of red liquor solids, a by-product of paper-making process. The prepared sulfonate...A carbon-based sulfonated catalyst was prepared by direct sulfonation and carbonization （in moderate conditions：200 ＆#176;C, 12 h） of red liquor solids, a by-product of paper-making process. The prepared sulfonated cata-lyst （SC） had aromatic structure, composed of carbon enriched inner core, and oxygen-containing （SO3H, COOH, OH） groups enriched surface. The SO3H, COOH, OH groups amounted to 0.74 mmol·g^-1, 0.78 mmol·g^-1, 2.18 mmol·g^-1, respectively. The fresh SC showed much higher catalytic activity than that of the traditional solid acid catalysts （strong^-acid 732 cation exchange resin, hydrogen type zeolite socony mobile-five （HZSM-5）, sulfated zir-conia） in esterification of oleic acid. SC was deactivated during the reactions, through the mechanisms of leaching of sulfonated species and formation of sulfonate esters. Two regeneration methods were developed, and the catalytic activity can be mostly regenerated by regeneration Method 1 and be fully regenerated by regeneration Method 2, respectively.展开更多
This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified ...This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified oil,reaction temperature,and catalyst loading were studied to optimize the conditions for maximum conversion of free fatty acids（FFAs）. The results showed that the optimal conversion rate of FFAs was 91.87% at the mass ratio of methanol to acidified oil of 2.5：1.0,reaction temperature of 65.0 °C,catalyst loading of 5.0 g and reaction time of 8.0 h. The external and internal mass transfer resistances were negligible based on the experimental results and a pseudo-homogeneous kinetic model was proposed for the esterification. The activation energy and thermodynamic parameters including G,S and H were determined. The conversion rates of FFAs obtained from the established model were in good agreement with the experimental data.展开更多
A mild and efficient photochemical multi-component tandem reaction of quinoxalin-2(1H)-ones, alkenes and sulfinic acids is reported. This tandem reaction could be conveniently carried out at room temperature by employ...A mild and efficient photochemical multi-component tandem reaction of quinoxalin-2(1H)-ones, alkenes and sulfinic acids is reported. This tandem reaction could be conveniently carried out at room temperature by employing 4Cz IPN as the metal-free photocatalyst and dioxygen(air) as the environmentally benign oxidant. A number of sulfonated quinoxalin-2(1H)-ones were obtained in satisfactory yields with favorable functional group tolerance. Radical trapping experiment and fluorescence quenching experiments were performed to elucidate this visible-light mediated radical reaction process.展开更多
A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place ...A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.展开更多
Sulfonated syndiotactic polystyrene ionomers (SsPS) with 1.8 mol% degree of sulfonation have been studied. WAXD shows that the crystallinity of SsPS ionomers was decreased with increasing diameter size of the counter ...Sulfonated syndiotactic polystyrene ionomers (SsPS) with 1.8 mol% degree of sulfonation have been studied. WAXD shows that the crystallinity of SsPS ionomers was decreased with increasing diameter size of the counter ions and sPS > SsPS-H > SsPS-K > SsPS-Zn. Moreover, SsPS ionomers only have alpha crystal form, while original sPS has two crystal forms: alpha and beta crystal form. TGA shows that the thermal stability of SsPS ionomers is higher than that of the original sPS and SsPS-Zn > SsPS-K > SsPS-H. DSC shows that all the glass transition temperatures (T-g) of SsPS ionomers are higher than that of the neat sPS and SsPS-Zn > SsPS-Na > SsPS-K > SsPS-H. However, the melting temperature (T-m) and crystallization peak temperature (T-p) of SsPS ionomers are lower and SsPS-H > SsPS-Zn > SsPS-K > SsPS-Na, while the crystallinity (X-c) of SsPS-Zn is the lowest. Nonisothermal crystallization kinetics shows that the Avrami index of sPS and SsPS-H are both about 4, suggesting the nucleation growth of SsPS-H with lower degree of sulfonation still keeps its three-dimension form. FTIR spectra of SsPS ionomers show a splitting absorption band for asymmetric stretching vibration of sulfonation group. The CH in-plane bending vibration of benzene ring shifted to higher wavenumber and the symmetric stretching vibration of sulfonation group changed slightly with different counter ion neutralized SsPS ionomers.展开更多
A series of multiblock sulfonated poly(arylene ether sulfone)s(SPAES)with various block lengths and predictable ion exchange capacity were synthesized from 4,4’-difluorodiphenyl sulfone,4,4’-dihydrodiphenyl sulfone ...A series of multiblock sulfonated poly(arylene ether sulfone)s(SPAES)with various block lengths and predictable ion exchange capacity were synthesized from 4,4’-difluorodiphenyl sulfone,4,4’-dihydrodiphenyl sulfone and 4,4’-biphenol by one-pot and two-pot polymerization.;H-NMR and FTIR spectra confirmed the structure that sulfonic acid groups were introduced precisely on the poly(arylene ether sulfone)s by post-sulfonation which resulted in controllable sulfonation degree.The proton exchange membranes(PEMs)-based SPAES displayed excellent dimensional,thermal,antioxidant stability,proton conductivity and mechanical properties(maximum tensile stress>35 MPa).Thermogravimetric analysis indicated the prepared SPAES began to degrade above 310℃.The effects of polymerization processes,those were,one-pot hydrophobic segment process,one-pot hydrophilic segment process and two-pot process,on the properties of polymers were investigated.The proton conductivity and microphase separation of SPAES PEMs increased in order of those prepared by one-pot hydrophobic segment process,two-pot process and one-pot hydrophilic segment process.The highest conductivities of SPAES synthesized by the above processes under 80℃ and 100%relative humidity were 213(MS4),297(MB3)and 360 mS·cm^(-1)(MQ2),respectively.展开更多
基金supported by the National Natural Science Foundation of China(Nos.51978052 and 22306012)the National Key Research and Development Program of China(No.2023YFC3711300)the Guangdong Basic and Applied Basic Research Foundation(No.2022A1515110578).
文摘Acidic-and alkalic-hydrolyses are selective in breaking functional bonds and falling off pharmacological moieties of antibiotics in production wastewater in comparison with advanced oxidation processes.Elevating temperature can accelerate hydrolytic kinetics and improve efficiency.In this work,magnetic sulfonated polypropylene resin(Fe_(3)O_(4)@PS-S)composites were reported for acidic-thermal hydrolysis of tylosin by employing the acidic feature of sulfonic group,the dielectric effect of resin,and the magnetic-loss effect of magnetite under microwave irradiation.As observed,a rapid and complete mitigation 100 mg/L of tylosin was achieved within 15 min by the catalysts.Acidic cleavage of tylosin was fulfilled by sulfonic groups in the composites,and microwave thermal accelerated the hydrolysis reactions due to the dielectric and magnetic-loss effects.Differentiating the dielectric and magnetic-loss effects through electromagnetic analyses indicated that the latter contributed more in converting microwave energy to heat.The interactions under multiple operational conditions were quantitatively fitted using the Behnajady model and visually demonstrated,which indicated that a synergic effect of microwave thermal-and acidichydrolyses contributed to the efficient mitigation of tylosin.The transformation products were identified and the pathways were supposed.Cleaving deoxyaminosugars groups and destructing lactone structures led to reduced antibacterial potential and toxicity reduction.The acute toxicity of tylosin and transformation products to fish,daphnia,and green algae were all classified as non-toxic.This work suggested that this synergistic acid-thermal hydrolytic method is attractive and promising in pretreating tylosin production wastewater in field.
基金financially supported by the National Natural Science Foundation of China (No. 21774006)
文摘The sulfonated poly(α-methyl styrene-b-isobutylene-b-α-methyl styrene)copolymers(S-ASIBS)with the average molar percentage of sulfonic acid(-SO_(3)H)groups(SP)ranging from 3.6 mol%to 14.3 mol%could be synthesized by sulfonation of ASIBS with acetyl sulfate.The hydrophilic ionic channels were generated for proton exchange membranes(PEMs)by ion aggregation of-SO_(3)H groups and microphase separation between hydrophobic polyisobutylene and hydrophilic sulfonated poly(α-methyl styrene)segments in S-ASIBS.The proton transport ability was improved while oxidative stability was decreased by increasing SP in S-ASIBS.The appropriate SP of about 12.7 mol%in S-ASIBS provides the available PEMs with high proton transport ability,low methanol permeability and good oxidative stability.The absence of active tertiary hydrogen atoms along S-ASIBS copolymer chains avoids their attack by peroxy radicals.The residual rates of weight(RW)and proton conductivity(Rσ)of S-ASIBS-12.7 membrane after oxidation treatment for 916 h were 84.3%and 88.1%respectively,near to those of commercial Nafion 117(RW=87.9%,Rσ=90.3%).The membrane electrode assembly(MEA)could be prepared by using various S-ASIBS as PEMs for direct methanol fuel cell.The single cell with S-ASIBS-12.7 MEA behaves high performance of open circuit voltage(OCV)of 548 mV and peak power density(Pmax)of 36.1 mW·cm^(-2),which is similar to those of Nafion 117(OCV=506 mV,P_(max)=35.6 mW·cm^(-2)).To the best of our knowledge,this is the first example of advanced S-ASIBS membrane with high proton conductivity,excellent fuel barrier property and remarkable oxidative stability for promising PEMs.
基金supported by the Ministry of Science and Technology of China(Science and Technology to Boost Economy 2020 Key Project,SQ2020YFF0412719 and SQ2020YFF0404901)The Key Research and Development and Transformation Program Funding in Qinghai Province(2021-GX-105)Major projects of Anhui Province and Anhui Province Key Research and Development Plan(202104e11020005)。
文摘A novel integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide(KCuFC/SPSG)was used for selectively extracting rubidium ion(Rb^(+))from brine.To form KCuFC/SPSG,the precursor film of sulfonated polysulfone/graphene(SPSG)was synthesized by phase conversion process,which was alternately immersed in 0.1 mol·L^(-1)CuSO_(4)/K_(4)[Fe(CN)_(6)]by in-situ adsorption coupled co-precipitation method.Various data such as nuclear magnetic resonance spectrometer,Fourier transform infrared spectroscope,X-ray photoelectron spectroscope,X-ray diffraction,scanning electron microscope,and energy dispersive spectroscopy all verified that abundant KCuFC were uniformly located on the film.The resulting KCuFC/SPSG was used in film separation system.As the solution was fed into the system,the Rb^(+)could be selectively adsorption by KCuFC/SPSG.After the saturation adsorption,0.5 mol·L^(-1)NH_(4)Cl/HCl was fed into the film cell,Rb^(+)could be quickly desorbed by ion-exchange between Rb^(+)and NH_(4)^(+)in the lattice of KCuFC.The purpose of separating and recovering Rb^(+)from the brine can be achieved after the repeated operation.The effects of pH,adsorption time,and interferential ions on the adsorption capacity of Rb^(+)were investigated by batch experiments.The adsorption behavior fits the pseudo-second order kinetic process,while KCuFC has a higher adsorption capacity(Langmuir maximum sorption 165.4 mg·g^(-1)).In addition,KCuFC/SPSG shows excellent selectivity for Rb^(+)even in complex brine systems.KCuFC/SPSG could maintain 93.5%extraction efficiency after five adsorption/desorption cycles.
基金Supported by the State Key Development Program for Basic Research of China （2008CB617502）, the National Natural Science Foundation of China （20606025）, and Program for Changjiang Scholars and Innovative Research Team in University of China （IRT0641）.
文摘A sulfonated poly（ether ether ketone） （SPEEK） membrane with fairly high degree of sulfonation （DS） swells excessively and even dissolves at high temperature. To solve these problems, sulfonated phenolphthalein poly（ether sulfone） （SPES-C, DS= 53.7%） is blended with the SPEEK matrix （DS= 55.1%, 61.7%） to prepare SPEEKJSPES-C blend membrane. The decrease in swelling degree and methanol permeability of the membrane is dose-dependent. Pure SPEEK （DS = 61.7%） membrane dissolves completely in water at 70℃, whereas the swelling degree of the SPEEK （DS = 61.7%）/SPES-C （40%, by mass） membrane is 29.7% at 80℃. From room temperature to 80℃, the methanol permeability of all SPEEK （DS = 55.1%）/SPES-C blend membranes is about one order of magnitude lower than that of Nafion 115. At higher temperature, the addition of SPES-C polymer increases the dimensional stability and greater proton conductivity can be achieved. The SPEEK （DS = 55.1%）/SPES-C （40%, by mass） membrane can withstand temperatures up to 150℃. The proton conductivity of SPEEK （DS = 55.1%）/SPES-C （30%, by mass） membrane approaches 0.16 S·cm^-1, matching that of Nafion 115 at 140℃ and 100% RH, while pure SPEEK （DS = 55.1%） membrane dissolves at 90℃. The SPEEK/SPES-C blend membranes are promising for use in direct methanol fuel cells because of their good dimensional stability, high proton conductivity, and low methanol permeability.
基金financially supported by the Department of Science and Technology of Jilin Province(No.20086019)the 863 Project from the Ministry of Science and Technology of China(No.2006AA03Z224)
文摘A series of sulfonated polyimides （SPIs） containing pyridine groups were prepared by direct polycondensation from 1,4,5,8-naphthalenetetracarboxylic dianhydride （NTDA）, 4,4＇-diaminodiphenyl ether-2,2＇-disulfonic acid （ODADS） and 4-（4-methoxy）phenyl-2,6-bis（4-aminophenyl）pyridine （DAM）. The resulting copolymers displayed good solubility in common organic solvents. Flexible, transparent, tough membranes were obtained via solution casting. All the films showed high thermal stability with desulfonation temperature over 300℃. They exhibited prominent mechanical properties with Young＇s modulus around 2.0 GPa. High proton conductivity （0.23 S/cm at 100% RH） was also observed. More importantly, the new materials exhibited low water uptake （30 wt%-75 wt% at 80℃） and improved water stability, which were attributed to the acid-base interaction between sulfonic acid and pyridine functional groups.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea(No.20164030201070)supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science,ICT and future Planning(NRF-2017R1A2B4005230)
文摘A ternary hybrid membrane architecture consisting of sulfonated fluorinated multi-block copolymer （SFMC）, sulfonated （poly ether ether ketone） （SPEEK） and I or 5 wt% graphene oxide （GO） was fabricated through a facile solution casting approach. The simple, but effective monomer sulfonation was performed for SFMC to create compact and rigid hydrophobic backbone structures, while conventional random sulfonation was carried-out for SPEEK. Hydrophilic-hydrophobic-hydrophilic structure of SFMC enhances the compatibility with SPEEK and GO and allows for an unprecedented approach to alter me- chanical strength and proton conductivity of ternary hybrid membrane, as verified from universal test machine （UTM） curves and alternating current （AC） impedance plots. The impact of GO integration on the morphology and roughness of hybrid membrane was scrutinized using field emission scanning electron microscope （FE-SEM） and atomic force microscope （AFM）. Ternary hybrid showed uniform intercalation of GO nanosheets throughout the entire surface of membrane with an increased surface roughness of 8.91 nm. The constructed ternary hybrid membrane revealed excellent water absorption, ion exchange capacity and gas barrier properties, while retaining reasonable dimensional stability. The well-optimized ternary hybrid membrane containing 5 wt% GO revealed a maximum proton conductivity of 111.9 mS/cm, which is higher by a factor of two-fold with respect to that of bare SFMC membrane. The maximum PEMFC power density of 528.07mW/cm2 was yielded by ternary hybrid membrane at a load current density of 1321.1 mA/cm2 when operating the cell at 70 ℃ under 100% relative humidity （RH）. In comparison, a maximum power density of only 182.06 mW/cm2 was exhibited by the bare SFMC membrane at a load current density of 455.56 mA/cm2 under same operating conditions.
基金Supported by the Special Fund for International Cooperation Projects of China (2005DFA50160)
文摘Polyethersulfone(PES) is widely used as biomaterials due to its thermal stability,mechanical strength,and chemical inertness.Nevertheless,their blood compatibility is still not adequate for hemodialysis and blood purification.In this study,the sulfonated polyethersulfone(SPES) was synthesized through an electrophilic substitution reaction,and PES/SPES blending membranes were prepared.The characterization of the SPES was studied by FTIR.The water adsorption and water contact angle experiments show that the hydrophilicity of PES/SPES blend membrane was improved as for the sulfonate group existing in the SPES.Moreover,PES/SPES blend membrane could effectively reduce bovine serum albumin adsorption and prolong the blood coagulation time compared with the PES membrane,thereby improving blood compatibility.
基金National High Technology Research and Development Program of China(No. 2013AA064301)National Natural Science Foundation of China (No. 51274210)
文摘Treatment of drilling wastewater from a sulfonated drilling mud system in the Shengli Oilfield, East China, was studied. The wastewater was deeply treated by a chemical coagulationcentrifugal separation-ozone catalytic oxidation combined process. The factors （i.e. pH value, chemical dosage, reaction time, etc.） influencing the treatment effect were investigated, and pH = 7 was determined as optimal for the coagulation; polymeric aluminum chloride （PAC） was selected as the optimal coagulant with a dosage of 18 g/L; cationic polyacrylamide （CPAM） with molecular weight of 8 million was selected as the optimal coagulant aid with an optimum dosage of 8 mg/L; and the optimal condition of catalytic ozonation was found to be a pH of 12 and an oxidation time of 40 min. The results showed that the combined treatment process was effective. The oil content and suspended solids content of the effluent reached the first class discharge standard according to China＇s standard GB 8978-1996 （Integrated Wastewater Discharge Standard） and the chemical oxygen demand （COD） decreased to 195 mg/L from 2.34×10^4 mg/L after coagulation process and ozone oxidation at pH = 12 for 40 min.
基金Supported by the State Key Development Program for Basic Research of China （2008CB617502）, the National Natural Science Foundation of China （20606025）, and Program for Changjiang Scholars and Innovative Research Team in University of China （IRT0641）.
文摘A sulfonated poly（ether ether ketone） （SPEEK） membrane with a fairly high degree of sulfonation （DS） can swell excessively and even dissolve at high temperature. To solve these problems, insolvable functionalized silica powder with sulfonic acid groups （SiOx-S） was added into the SPEEK matrix （DS = 55.1%） to prepare SPEEK/ SiOx-S composite membranes. The decrease in both the swelling degree and the methanol permeability of the membranes was a dose-dependent result of addition of the SiOx-S powder. Pure SPEEK membrane swelled 52.6% at 80℃, whereas the SPEEK/SiOx-S （15%, by mass） membrane swelled only 27.3% at the same temperature. From room temperature to 80℃, all SPEEK/SPEEK/SiOx-S composite membranes had methanol permeability of about one order of magnitude lower than that ofNafion115. Compared with pure SPEEK membranes, the addition of the SiOx-S powder not only leads to higher proton conductivity, but also increases the dimensional stability at higher temperatures, and greater proton conductivity can be achieved at higher temperature. The SPEEK/SiO4-S （20%, by mass） membrane could withstand temperature up to 145℃, at which in 100% relative humidity （RH） its proton conductivity exceeded slightly that of Nafion 1 15 membrane and reached 0.17 S·cm^-1, while pure SPEEK membrane dissolved at 90℃. The SPEEK/SiOx-S composite membranes are promising for use in direct methanol fuel cells because of their good dimensional stability, high proton conductivity, and low methanol permeability.
基金supported by the National Natural Science Foundation of China(Nos.21776034,21476044 and 21406031)Joint Funds of the National Natural Science Foundation of China(U1663223)+1 种基金National Key Research and Development Program of China(2016YFB0101203)Changjiang Scholars Program(T2012049)。
文摘The novel sulfonated polybenzimidazole(sPBI)/amine functionalized titanium dioxide(AFT) composite membrane is devised and studied for its capability of the application of high temperature proton exchange membrane fuel cells(HT-PEMFCs),unlike the prior low temperature AFT endeavors.The high temperature compatibility was actualized because of the filling of free volumes in the rigid aromatic matrix of the composite with AFT nanoparticles which inhibited segmental motions of the chains and improved its thermal stability.Besides,amine functionalization of TiO2 enhanced their dispersion character in the sPBI matrix and shortened the interparticle separation gap which finally improved the proton transfer after establishing interconnected pathways and breeding more phosphoric acid(PA) doping.In addition,the appeared assembled clusters of AFT flourished a superior mechanical stability.Thus,the optimized sPBI/AFT(10 wt%) showed 65.3 MPa tensile strength;0.084 S·cm^-1 proton conductivity(at 160℃;in anhydrous conditions),28.6% water uptake and PA doping level of 23 mol per sPBI repeat unit.The maximum power density peak for sPBI/AFT-10 met the figure of0.42 W·cm^-2 at 160℃(in dry conditions) under atmospheric pressure with 1.5 and 2.5 stoichiometric flow rates of H2/air.These results affirmed the probable fitting of sPBI/AFT composite for HT-PEMFC applications.
基金supported by the National Nature Science Foundation of China (J1210060, 21143002)
文摘Sulfonated carbon as a strong and stable solid acid catalyst exhibited excellent catalytic performance in various acid-catalyzed reactions. Here, sulfonated carbon, as catalyst for oxidation reaction, was prepared via the carbonization of starch followed by sulfonation with concentrated sulfuric acid. N2 physisorption, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray fluorescence and acid-base titration were used to characterize the obtained materials. The catalytic activity of sulfonated carbon was studied in the oxidation of aldehydes to carboxylic acids using 30 wt% H2O2 as oxidant. This oxidation protocol works well for various aldehydes including aromatic and aliphatic aldehydes. The sulfonated carbon can be recycled for three times without obvious loss of activity.
文摘The effects of various quinone compounds on the decolorization rates of sulfonated azo dyes by Sphingomonas xenophaga QYY were investigated. The results showed that anthraquinone-2-sulfonate （AQS） was the most effective redox mediator and AQS reduction was the rate-limited step of AQS-mediated decolorization of sulfonated azo dyes. Based on AQS biological toxicity tests, it was assumed that AQS might enter the cells and kill them. In the cytoplasmic extracts from strain QYY, AQS more effectively increased decolorization rates of sulfonated azo dyes than other quinone compounds. In addition, we found a NADH/FMN-dependent AQS reductase using nondenaturing polyacrylamide gel electrophoresis （Native-PAGE）.
基金supported by the Natural Science Foundation of Liaoning Province of China(No.20041076)
文摘Sulfonated poly（ether ketone）s containing 3,5-dimethyl phthalazinone moieties （SPPEK-DMs） with different degrees of sulfonation （DS） were synthesized via direct polycondensation from 4-（3,5-dimethyl-4-hydroxyphenyl）-2,3- phthalazinone, 4,4＇-difluorobenzophenone and 3,3＇-disulfonate-4,4＇-difluorobenzophenone. The chemical structure of SPPEK-DMs was characterized by FTIR and 1H-NMR. Thermal stability of SPPEK-DMs was characterized by the thermogravimetric analysis. The membranes prepared from SPPEK-DMs exhibited ion exchange capacities （IEC） ranging from 0.93 mmol.g-1 to 1.86 mmol.g-1. Water uptake, swelling, oxidative stability and methanol permeability of SPPEK- DMs membranes were investigated. SPPEK-DMs membranes exhibited high oxidative stability. The methanol permeability values of SPPEK-DMs membranes were in the range 5.15× 10^-8-6.61×10^-7 cm^2.s-1, which was much lower than those of Nafion117. The proton conductivity of SPPEK-DM40 membranes was 1.1 ×10^-2 S.cm^-1 at 70℃.
文摘A series of sulfonated polyimide copolymers as novel proton exchange materials were synthesized by the polycondensation of 1,4,5,8-naphthalene-tetracarboxylic dianhydride （NTDA）, sulfonated diamine based on pyridine group and diamine containing N-phenyl-1,2,4-triazole moiety. Flexible, transparent and tough membranes with high thermal stability and good mechanical properties were obtained. They exhibited good stability in boiling water and Fenton＇s reagent at 80 ℃. More interestingly, a nonlinear relationship between proton conductivities of the resulting membranes and the degree of sulfonation （DS） was observed. The membrane with 50% DS exhibited the maximum proton conductivity, which was due to the combinational contributions of sulfonic acid and N-pheny-1,2,4-triazole groups. Thus, the N-phenyl-l,2,4- triazole moiety in this study not only can depress water absorption but also increase proton conductivity, especially at low DS.
基金Supported by the State Key Development Program for Basic Research of China(2013CB228104,2010CB732205)Ph.D Programs Foundation of Ministry of Education of China(20120172110011)the National High Technology Research and Development Program of China(2012AA051801)
文摘A carbon-based sulfonated catalyst was prepared by direct sulfonation and carbonization （in moderate conditions：200 ＆#176;C, 12 h） of red liquor solids, a by-product of paper-making process. The prepared sulfonated cata-lyst （SC） had aromatic structure, composed of carbon enriched inner core, and oxygen-containing （SO3H, COOH, OH） groups enriched surface. The SO3H, COOH, OH groups amounted to 0.74 mmol·g^-1, 0.78 mmol·g^-1, 2.18 mmol·g^-1, respectively. The fresh SC showed much higher catalytic activity than that of the traditional solid acid catalysts （strong^-acid 732 cation exchange resin, hydrogen type zeolite socony mobile-five （HZSM-5）, sulfated zir-conia） in esterification of oleic acid. SC was deactivated during the reactions, through the mechanisms of leaching of sulfonated species and formation of sulfonate esters. Two regeneration methods were developed, and the catalytic activity can be mostly regenerated by regeneration Method 1 and be fully regenerated by regeneration Method 2, respectively.
基金support from the Natural Science Foundation of Shandong Province (Grant no.ZR2013BL010)the Research Excellence Award of Shandong University of Technology and the Zibo Technology Research and Development Program of China (Grant no.2013GG04110)
文摘This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins（SCER）. The effects of the mass ratio of methanol to acidified oil,reaction temperature,and catalyst loading were studied to optimize the conditions for maximum conversion of free fatty acids（FFAs）. The results showed that the optimal conversion rate of FFAs was 91.87% at the mass ratio of methanol to acidified oil of 2.5：1.0,reaction temperature of 65.0 °C,catalyst loading of 5.0 g and reaction time of 8.0 h. The external and internal mass transfer resistances were negligible based on the experimental results and a pseudo-homogeneous kinetic model was proposed for the esterification. The activation energy and thermodynamic parameters including G,S and H were determined. The conversion rates of FFAs obtained from the established model were in good agreement with the experimental data.
基金supported by Youth Innovation and Technology Project of high School in Shandong Province (No. 2019KJC021)Natural Science Foundation of Qinghai Province of China (No. 2020-ZJ-915)。
文摘A mild and efficient photochemical multi-component tandem reaction of quinoxalin-2(1H)-ones, alkenes and sulfinic acids is reported. This tandem reaction could be conveniently carried out at room temperature by employing 4Cz IPN as the metal-free photocatalyst and dioxygen(air) as the environmentally benign oxidant. A number of sulfonated quinoxalin-2(1H)-ones were obtained in satisfactory yields with favorable functional group tolerance. Radical trapping experiment and fluorescence quenching experiments were performed to elucidate this visible-light mediated radical reaction process.
基金This work was financially supported by the National Science Foundation of China (NSFC) (Key project, No. 29734120)the China High-Tech Development 863 Program (No. 2003AA302410)+1 种基金Natural Science Foundation of Guangdong Province (Excellent Team Project, No. 015007)Canton Province Sci & Tech Bureau (Key Strategic Project, No. A1100402) and Guangzhou Sci & Tech Bureau
文摘A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.
文摘Sulfonated syndiotactic polystyrene ionomers (SsPS) with 1.8 mol% degree of sulfonation have been studied. WAXD shows that the crystallinity of SsPS ionomers was decreased with increasing diameter size of the counter ions and sPS > SsPS-H > SsPS-K > SsPS-Zn. Moreover, SsPS ionomers only have alpha crystal form, while original sPS has two crystal forms: alpha and beta crystal form. TGA shows that the thermal stability of SsPS ionomers is higher than that of the original sPS and SsPS-Zn > SsPS-K > SsPS-H. DSC shows that all the glass transition temperatures (T-g) of SsPS ionomers are higher than that of the neat sPS and SsPS-Zn > SsPS-Na > SsPS-K > SsPS-H. However, the melting temperature (T-m) and crystallization peak temperature (T-p) of SsPS ionomers are lower and SsPS-H > SsPS-Zn > SsPS-K > SsPS-Na, while the crystallinity (X-c) of SsPS-Zn is the lowest. Nonisothermal crystallization kinetics shows that the Avrami index of sPS and SsPS-H are both about 4, suggesting the nucleation growth of SsPS-H with lower degree of sulfonation still keeps its three-dimension form. FTIR spectra of SsPS ionomers show a splitting absorption band for asymmetric stretching vibration of sulfonation group. The CH in-plane bending vibration of benzene ring shifted to higher wavenumber and the symmetric stretching vibration of sulfonation group changed slightly with different counter ion neutralized SsPS ionomers.
基金financially supported by the National Natural Science Foundation of China(No.21306010)。
文摘A series of multiblock sulfonated poly(arylene ether sulfone)s(SPAES)with various block lengths and predictable ion exchange capacity were synthesized from 4,4’-difluorodiphenyl sulfone,4,4’-dihydrodiphenyl sulfone and 4,4’-biphenol by one-pot and two-pot polymerization.;H-NMR and FTIR spectra confirmed the structure that sulfonic acid groups were introduced precisely on the poly(arylene ether sulfone)s by post-sulfonation which resulted in controllable sulfonation degree.The proton exchange membranes(PEMs)-based SPAES displayed excellent dimensional,thermal,antioxidant stability,proton conductivity and mechanical properties(maximum tensile stress>35 MPa).Thermogravimetric analysis indicated the prepared SPAES began to degrade above 310℃.The effects of polymerization processes,those were,one-pot hydrophobic segment process,one-pot hydrophilic segment process and two-pot process,on the properties of polymers were investigated.The proton conductivity and microphase separation of SPAES PEMs increased in order of those prepared by one-pot hydrophobic segment process,two-pot process and one-pot hydrophilic segment process.The highest conductivities of SPAES synthesized by the above processes under 80℃ and 100%relative humidity were 213(MS4),297(MB3)and 360 mS·cm^(-1)(MQ2),respectively.
