The most important aspect of every civil engineering project is acquiring reliable information on the ground on which the project will be constructed. This research includes a site investigation, which is seen as a pr...The most important aspect of every civil engineering project is acquiring reliable information on the ground on which the project will be constructed. This research includes a site investigation, which is seen as a primary stage in gathering geological, geotechnical, and other essential engineering data for structures’ safe and cost-effective design. Five boreholes at well-spaced spots were drilled for subsurface investigation at a maximum depth of 15 m to 30 m. The standard penetration tests (SPT) were performed at different depths, soil samples were taken at various intervals, and lithological changes were observed. The friction angle was between 19.6ºand 33.03º, whereas the cohesion ranges between 0.25 kg/cm<sup>2</sup> and 0.42 kg/cm<sup>2</sup>, indicating a strong resistance to shearing and a high capacity to sustain the load. Furthermore, the soil samples’ maximum dry density ranges from 1.63 g/cm<sup>3</sup> to 1.80 g/cm<sup>3</sup>. In addition, water table depths were recorded from 6.0 m to 7.0 m. The net bearing capacity for isolated/pad foundation at a depth of 1.5 m to 2.5 m below the ground level has been calculated as 95.0 to 120.0 kPa and 120.0 to 180.0 kPa for raft foundation. The net allowable pressure settlement limits for isolated/pad and raft foundations are 25 mm (1-inch) and 50 mm (2-inches), respectively. The investigation has found no severe geological flaws on the proposed construction site, and therefore it is appropriate for the construction of an Air Separation Unit (ASU) Oxygen Plant.展开更多
文摘The most important aspect of every civil engineering project is acquiring reliable information on the ground on which the project will be constructed. This research includes a site investigation, which is seen as a primary stage in gathering geological, geotechnical, and other essential engineering data for structures’ safe and cost-effective design. Five boreholes at well-spaced spots were drilled for subsurface investigation at a maximum depth of 15 m to 30 m. The standard penetration tests (SPT) were performed at different depths, soil samples were taken at various intervals, and lithological changes were observed. The friction angle was between 19.6ºand 33.03º, whereas the cohesion ranges between 0.25 kg/cm<sup>2</sup> and 0.42 kg/cm<sup>2</sup>, indicating a strong resistance to shearing and a high capacity to sustain the load. Furthermore, the soil samples’ maximum dry density ranges from 1.63 g/cm<sup>3</sup> to 1.80 g/cm<sup>3</sup>. In addition, water table depths were recorded from 6.0 m to 7.0 m. The net bearing capacity for isolated/pad foundation at a depth of 1.5 m to 2.5 m below the ground level has been calculated as 95.0 to 120.0 kPa and 120.0 to 180.0 kPa for raft foundation. The net allowable pressure settlement limits for isolated/pad and raft foundations are 25 mm (1-inch) and 50 mm (2-inches), respectively. The investigation has found no severe geological flaws on the proposed construction site, and therefore it is appropriate for the construction of an Air Separation Unit (ASU) Oxygen Plant.
