Tectonic uplift at the end of Sinian resulted in the denudation of the Dengying （灯影） Formation on a different scale and the development of a great number of secondary dissolution vugs beneath the unconformity betw...Tectonic uplift at the end of Sinian resulted in the denudation of the Dengying （灯影） Formation on a different scale and the development of a great number of secondary dissolution vugs beneath the unconformity between Sinian and Cambrian.Geological and geochemical characteristics such as the development of caves,sinkholes,karst tubes and weathering crust,abrupt depletion and negative deflection of δ13C and δ18O in country rock and vug filling toward unconformity surface suggest that subaerial karstification is responsible for the development of secondary karst vugs within 150 m or so beneath the unconformity surface.This kind of secondary dissolution vug was partially or completely filled by different stage dolomite,calcite,quartz and bitumen during the later deep burial and uplift.Facts such as the obvious difference in δ13C and δ18O of the filling in the subaerial karst vug from the country rock and the value of δ13C and δ18O of the filling increasing or decreasing with that of the country rocks,suggest that the hydrothermal fluid charged in vugs is allogenic fluid.Subaerial karstification vug acted as a conduit for allogenic corrosive fluid which can create new secondary vugs and enlarge previous karst vugs.The dissolution,precipitant and recrystallization produced by allogenic corrosive fluid introduction and petroleum thermal cracking,caused contraction or enlargement of the subaerial karstification vugs and the development of new secondary vugs during the deep burial and uplift.The ultimate vug of deep burial dolomitite is determined not only by fluid charge,dissolution,mineral precipitant,and petroleum thermal cracking during the deep burial and tectonic uplift,but also by the amount of initial secondary dissolution vugs created by subaerial karstification.展开更多
The principal features,geotectonic settings and association with near-surface hydrothermal mineral systems of ancient and present subaerial hot springs,fumaroles and geysers are herein reviewed.Fumaroles and geysers u...The principal features,geotectonic settings and association with near-surface hydrothermal mineral systems of ancient and present subaerial hot springs,fumaroles and geysers are herein reviewed.Fumaroles and geysers usually occur in volcanic craters and are in most cases,part and parcel of hot spring environments.Subaerial hot springs are characterised by siliceous-and carbonate-rich chemical sediments,such as sinters and travertines,respectively.Sinters are commonly enriched in various metalliferous elements.Hot springs surface discharges are also characterised by pools,which exhibit bright colours due to the presence of microorganisms.Present-day examples discussed in this paper,include the fumaroles and hot springs of the White Island volcano(New Zealand),the world-renowned Yellowstone caldera(USA)and the Afar region of the East African Rift System.The Afar triangle,in the northern part of East African Rift System,provides a good example of hot springs associated with evaporative deposits.The Tuli-Sabi-Lebombo triple junction rifts were formed during the^180 Ma Karoo igneous event in southern Africa,of which the Tuli arm is the failed rift(aulacogen),as is the Afar region.The Tuli rift is effectively an unusual,if not unique,tectono-thermal setting,because it comprises Karoo-age hot springs systems and associated vein stockworks and breccias,which includes the Messina Cu deposit as well as currently active hot springs with sinter deposits probably due to post-Karoo uplift.Fumarolic pipes in ignimbrites of the Erongo Volcano-Plutonic Complex in Namibia are discussed.This is followed by an example of banded chert rocks in the Killara Formation of the Palaeoproterozoic Capricorn Orogen(Western Australia),interpreted as hot spring chemical sediments,which also show evidence of"fossil"microbial filaments.The paper ends with a brief overview of possible analogues of hot springs on planet Mars.展开更多
High resolution shallow seismic data was acquired from inner continental shelf of Goa,west coast of India to map underlying stratigraphic and buried geomorphic features of shelf strata.Seismic data revealed characteri...High resolution shallow seismic data was acquired from inner continental shelf of Goa,west coast of India to map underlying stratigraphic and buried geomorphic features of shelf strata.Seismic data revealed characteristic channel incisions beneath 4-15 m thick sediment layer and corresponds to multi cycle incisions.Stratigraphic analysis of these incision signatures reveals three prominent subaerial unconformities S6,S7 and S9.These unconformities were exposed during the last glacial,penultimate glacial(MIS-6)and prior to penultimate glacial(MIS-8)periods.On the basis of interpreted age of subaerial unconformities and differences in their morphological features,observed channel incisions have been divided grossly into three phases of incision.Phase-1 incisions are older than^330 kyr BP,whereas,incisions of Phase-2 and Phase-3 correspond to^320-125 kyr BP and^115-10 kyr BP respectively.Plan form of these incisions varied from a straight channel type to ingrown meander and then to anastomosing channel types.These channels meet at the confluence of present-day Mandovi and Zuari rivers.The confluence point has varied in due course of time because of cyclic incision and burial with repeated sea level fluctuations.The preserved main channel width varies from^100 m to 1000 m.and maximum channel depth reaches up to^35 m.Comparison of quantitative and qualitative morphologic results of different phases of incisions suggest that Phase-2 channels had^33%more mean bank full discharge than that of the Phase-3 channels.Phase-2 incisions had been carved in higher hydraulic energy condition as compared to Phase-3 incisions implying that the Indian summer monsoon was better during formative stages of Phase-2 incisions.展开更多
A straightforward conceptual method is proposed to quantitatively assess the seasonal-scale tendency of retreatment or advancement on microtidal beaches by using the backshore/foreshore length ratio. This method is ba...A straightforward conceptual method is proposed to quantitatively assess the seasonal-scale tendency of retreatment or advancement on microtidal beaches by using the backshore/foreshore length ratio. This method is based on measuring the cross-shore profile of a beach when it passes through the “transitional state” that separates the high-from the low-energy season, period during which the morphological characteristics of the beach tend to its equilibrium profile. In order to obtain real measurements of backshore (B) and foreshore (F), the definition of the limits bounding these two important components in subaerial beaches is reviewed and discussed. The approach based on the measurement of the?B/F?length ratio assumes that foreshore and backshore have equivalent lengths in beaches that approximate to their state of morphodynamic equilibrium (B/F?~ 1). A backshore length exceeding the foreshore length is indicative of a state of beach recession, with a?B/F?length ratio > 1. When the foreshore length is greater than the backshore length, the shoreline is advancing or, alternatively, it is developing in a state of morphological confinement,?i.e.?due to the presence of a sea cliff, with a?B/F?< 1. This practical method is then tested against 36 sand and gravel microtidal beach profiles measured along the coasts of Basilicata, in southern Italy. The various “beach states” are summarised into seven classes (I-VII), each identified from specific value intervals of the?B/F?length ratio.展开更多
To assist the analysis of tsunami hazards for Qatar coastal areas were using numerical model. By Tsunamis waves created from submarine earthquakes of magnitude of (M<sub>w</sub>) 8.6 and 9.0 in Richard sca...To assist the analysis of tsunami hazards for Qatar coastal areas were using numerical model. By Tsunamis waves created from submarine earthquakes of magnitude of (M<sub>w</sub>) 8.6 and 9.0 in Richard scale along the Makran Subduction Zone (MSZ) as well as coastal landslides with soil volume of 1.25 to 2.0 km<sup>3</sup> along Iranian coast inside the Arabian Gulf is considered. TUNAMI-N2KISR model (Al-Salem) was applied in this study to predict the tsunami propagation and magnitude of Tsunami induced wave heights. The model adopts to solve shallow water equations describing nonlinear long-wave theory. The model also incorporate tidal effect inside the Arabian Gulf as a tsunami travel time from Makran Subduction to Qatar coastline takes more than 9 hours with the tidal range of about 1.6 m during Spring Tide event. For coastal landslides, tsunami generation was simulated using a two-layer numerical model, developed by solving nonlinear long-wave equations. Two-layer model was used to determine initial wave deformation generated by a landslide case. Then TUNAMI-N2KISR was use to simulate tsunami wave propagation. Tsunami waves from landslide scenario arrived after 2.5 - 3 hr with maximum tsunami amplitudes along coasts of Ras laffan-Qatar were 0.8 to 1.0 m. Incorporation of ocean tide is found to impose some small effect on tsunami amplitude at Qatar coastline and nearby areas for the Mw 9.0 earthquake due to small tidal range in this area. In addition, it is found that the tsunami arrival time has become shorter.展开更多
Greenish clays often occur as thin layers in Early Cretaceous shallow-water carbonatesediments of Istria where they mark the top of fining upwards sequences. When they showevidence of subaerial exposure and pedogenesi...Greenish clays often occur as thin layers in Early Cretaceous shallow-water carbonatesediments of Istria where they mark the top of fining upwards sequences. When they showevidence of subaerial exposure and pedogenesis they are considered paleosols. The claymineralogical composition is as follow: (1) randomly oriented I/S mixed layer, (2) regularlyoriented I/S mixed layer, (3) illitic material, (4) kaolinite and (5) chlorite. The insoluble limestoneresidue situated immediately below the greenish clays is dominated by smectite, and also containskaolinite and illitic material. The very high smectite content in the insoluble residue is probablythe result of additions of volcanic dust during carbonate sedimentation. That clay mineralcomposition in the pelitic material clearly indicates the influence of both pedogenic and diageneticprocesses. It may also indicate additional volcanic dust contribution before and during thesubaerial exposure.展开更多
基金supported by the National Basic Research Program of China (No. 2005CB422106)
文摘Tectonic uplift at the end of Sinian resulted in the denudation of the Dengying （灯影） Formation on a different scale and the development of a great number of secondary dissolution vugs beneath the unconformity between Sinian and Cambrian.Geological and geochemical characteristics such as the development of caves,sinkholes,karst tubes and weathering crust,abrupt depletion and negative deflection of δ13C and δ18O in country rock and vug filling toward unconformity surface suggest that subaerial karstification is responsible for the development of secondary karst vugs within 150 m or so beneath the unconformity surface.This kind of secondary dissolution vug was partially or completely filled by different stage dolomite,calcite,quartz and bitumen during the later deep burial and uplift.Facts such as the obvious difference in δ13C and δ18O of the filling in the subaerial karst vug from the country rock and the value of δ13C and δ18O of the filling increasing or decreasing with that of the country rocks,suggest that the hydrothermal fluid charged in vugs is allogenic fluid.Subaerial karstification vug acted as a conduit for allogenic corrosive fluid which can create new secondary vugs and enlarge previous karst vugs.The dissolution,precipitant and recrystallization produced by allogenic corrosive fluid introduction and petroleum thermal cracking,caused contraction or enlargement of the subaerial karstification vugs and the development of new secondary vugs during the deep burial and uplift.The ultimate vug of deep burial dolomitite is determined not only by fluid charge,dissolution,mineral precipitant,and petroleum thermal cracking during the deep burial and tectonic uplift,but also by the amount of initial secondary dissolution vugs created by subaerial karstification.
文摘The principal features,geotectonic settings and association with near-surface hydrothermal mineral systems of ancient and present subaerial hot springs,fumaroles and geysers are herein reviewed.Fumaroles and geysers usually occur in volcanic craters and are in most cases,part and parcel of hot spring environments.Subaerial hot springs are characterised by siliceous-and carbonate-rich chemical sediments,such as sinters and travertines,respectively.Sinters are commonly enriched in various metalliferous elements.Hot springs surface discharges are also characterised by pools,which exhibit bright colours due to the presence of microorganisms.Present-day examples discussed in this paper,include the fumaroles and hot springs of the White Island volcano(New Zealand),the world-renowned Yellowstone caldera(USA)and the Afar region of the East African Rift System.The Afar triangle,in the northern part of East African Rift System,provides a good example of hot springs associated with evaporative deposits.The Tuli-Sabi-Lebombo triple junction rifts were formed during the^180 Ma Karoo igneous event in southern Africa,of which the Tuli arm is the failed rift(aulacogen),as is the Afar region.The Tuli rift is effectively an unusual,if not unique,tectono-thermal setting,because it comprises Karoo-age hot springs systems and associated vein stockworks and breccias,which includes the Messina Cu deposit as well as currently active hot springs with sinter deposits probably due to post-Karoo uplift.Fumarolic pipes in ignimbrites of the Erongo Volcano-Plutonic Complex in Namibia are discussed.This is followed by an example of banded chert rocks in the Killara Formation of the Palaeoproterozoic Capricorn Orogen(Western Australia),interpreted as hot spring chemical sediments,which also show evidence of"fossil"microbial filaments.The paper ends with a brief overview of possible analogues of hot springs on planet Mars.
基金financial support as JRF&SRF(Fellowship letter No.23/12/2012(ii)EU-V)
文摘High resolution shallow seismic data was acquired from inner continental shelf of Goa,west coast of India to map underlying stratigraphic and buried geomorphic features of shelf strata.Seismic data revealed characteristic channel incisions beneath 4-15 m thick sediment layer and corresponds to multi cycle incisions.Stratigraphic analysis of these incision signatures reveals three prominent subaerial unconformities S6,S7 and S9.These unconformities were exposed during the last glacial,penultimate glacial(MIS-6)and prior to penultimate glacial(MIS-8)periods.On the basis of interpreted age of subaerial unconformities and differences in their morphological features,observed channel incisions have been divided grossly into three phases of incision.Phase-1 incisions are older than^330 kyr BP,whereas,incisions of Phase-2 and Phase-3 correspond to^320-125 kyr BP and^115-10 kyr BP respectively.Plan form of these incisions varied from a straight channel type to ingrown meander and then to anastomosing channel types.These channels meet at the confluence of present-day Mandovi and Zuari rivers.The confluence point has varied in due course of time because of cyclic incision and burial with repeated sea level fluctuations.The preserved main channel width varies from^100 m to 1000 m.and maximum channel depth reaches up to^35 m.Comparison of quantitative and qualitative morphologic results of different phases of incisions suggest that Phase-2 channels had^33%more mean bank full discharge than that of the Phase-3 channels.Phase-2 incisions had been carved in higher hydraulic energy condition as compared to Phase-3 incisions implying that the Indian summer monsoon was better during formative stages of Phase-2 incisions.
文摘A straightforward conceptual method is proposed to quantitatively assess the seasonal-scale tendency of retreatment or advancement on microtidal beaches by using the backshore/foreshore length ratio. This method is based on measuring the cross-shore profile of a beach when it passes through the “transitional state” that separates the high-from the low-energy season, period during which the morphological characteristics of the beach tend to its equilibrium profile. In order to obtain real measurements of backshore (B) and foreshore (F), the definition of the limits bounding these two important components in subaerial beaches is reviewed and discussed. The approach based on the measurement of the?B/F?length ratio assumes that foreshore and backshore have equivalent lengths in beaches that approximate to their state of morphodynamic equilibrium (B/F?~ 1). A backshore length exceeding the foreshore length is indicative of a state of beach recession, with a?B/F?length ratio > 1. When the foreshore length is greater than the backshore length, the shoreline is advancing or, alternatively, it is developing in a state of morphological confinement,?i.e.?due to the presence of a sea cliff, with a?B/F?< 1. This practical method is then tested against 36 sand and gravel microtidal beach profiles measured along the coasts of Basilicata, in southern Italy. The various “beach states” are summarised into seven classes (I-VII), each identified from specific value intervals of the?B/F?length ratio.
文摘To assist the analysis of tsunami hazards for Qatar coastal areas were using numerical model. By Tsunamis waves created from submarine earthquakes of magnitude of (M<sub>w</sub>) 8.6 and 9.0 in Richard scale along the Makran Subduction Zone (MSZ) as well as coastal landslides with soil volume of 1.25 to 2.0 km<sup>3</sup> along Iranian coast inside the Arabian Gulf is considered. TUNAMI-N2KISR model (Al-Salem) was applied in this study to predict the tsunami propagation and magnitude of Tsunami induced wave heights. The model adopts to solve shallow water equations describing nonlinear long-wave theory. The model also incorporate tidal effect inside the Arabian Gulf as a tsunami travel time from Makran Subduction to Qatar coastline takes more than 9 hours with the tidal range of about 1.6 m during Spring Tide event. For coastal landslides, tsunami generation was simulated using a two-layer numerical model, developed by solving nonlinear long-wave equations. Two-layer model was used to determine initial wave deformation generated by a landslide case. Then TUNAMI-N2KISR was use to simulate tsunami wave propagation. Tsunami waves from landslide scenario arrived after 2.5 - 3 hr with maximum tsunami amplitudes along coasts of Ras laffan-Qatar were 0.8 to 1.0 m. Incorporation of ocean tide is found to impose some small effect on tsunami amplitude at Qatar coastline and nearby areas for the Mw 9.0 earthquake due to small tidal range in this area. In addition, it is found that the tsunami arrival time has become shorter.
文摘Greenish clays often occur as thin layers in Early Cretaceous shallow-water carbonatesediments of Istria where they mark the top of fining upwards sequences. When they showevidence of subaerial exposure and pedogenesis they are considered paleosols. The claymineralogical composition is as follow: (1) randomly oriented I/S mixed layer, (2) regularlyoriented I/S mixed layer, (3) illitic material, (4) kaolinite and (5) chlorite. The insoluble limestoneresidue situated immediately below the greenish clays is dominated by smectite, and also containskaolinite and illitic material. The very high smectite content in the insoluble residue is probablythe result of additions of volcanic dust during carbonate sedimentation. That clay mineralcomposition in the pelitic material clearly indicates the influence of both pedogenic and diageneticprocesses. It may also indicate additional volcanic dust contribution before and during thesubaerial exposure.
