With the acceleration of urbanization,environmental vibration and noise pollution have become increasingly severe,and traditional vibration and noise reduction technologies are insufficient to meet current vibration c...With the acceleration of urbanization,environmental vibration and noise pollution have become increasingly severe,and traditional vibration and noise reduction technologies are insufficient to meet current vibration control requirements.This study,based on locally resonant theory,designed a novel local resonance periodic block(LRPB).Using the plane wave expansion method(PWEM)and the finite element method(FEM),this study investigated the bandgap characteristics,formation mechanisms,and vibration and acoustic performance of an LRPB under different periodic structures and material selection.The vibration reduction and noise reduction performance of LRPB has been validated through the Qingdao metro project.The research results show that the LRPB is superior to other periodic structures in terms of wide bandgap.Furthermore,configuring soft scatterer material,increasing the unit size,enhancing the material filling rate,and adopting a honeycomb arrangement can effectively reduce bandgap frequency.In structural design,non-high symmetry demonstrates greater advantages.In a study of a subway tunnel,the LRPB demonstrated superior vibration and noise mitigation performance compared to wave impeding block(WIB),thereby demonstrating potential for use in the field of vibration and noise reduction with regard to structures.展开更多
Periodic isolator is well known for its wave filtering characteristic.While in middle and high frequencies,the internal resonances of the periodic isolator are evident especially when damping is small.This study propo...Periodic isolator is well known for its wave filtering characteristic.While in middle and high frequencies,the internal resonances of the periodic isolator are evident especially when damping is small.This study proposes a novel aperiodic vibration isolation for improving the internal resonances control of the periodic isolator.The mechanism of the internal resonances control by the aperiodic isolator is firstly explained.For comparing the internal resonances suppression effect of the aperiodic isolator with the periodic isolator,a dynamic model combing the rigid machine,the isolator,and the flexible plate is derived through multi subsystem modeling method and transfer matrix method,whose accuracy is verified through the finite element method.The influences of the aperiodicity and damping of the isolator on the vibration isolation performance and internal resonances suppression effect are investigated by numerical analysis.The numerical results demonstrate that vibration attenuation performances of the periodic isolator and aperiodic isolator are greatly over than that of the continuous isolator in middle and high frequencies.The aperiodic isolator opens the stop bandgaps comparing with the periodic isolator where the pass bandgaps are periodically existed.The damping of the isolator has the stop bandgap widening effect on both the periodic isolator and the aperiodic isolator.In addition,a parameter optimization algorithm of the aperiodic isolator is presented for improving the internal resonances control effect.It is shown that the vibration peaks within the target frequency band of the aperiodic isolator are effectively reduced after the optimization.Finally,the experiments of the three different vibration isolation systems are conducted for verifying the analysis work.展开更多
Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than t...Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.展开更多
The alteration in surface color of metallic glasses(MGs)holds great significance in the context of microstructuredesign and commercial utility.It is essential to accurately describe the structures that are formed duri...The alteration in surface color of metallic glasses(MGs)holds great significance in the context of microstructuredesign and commercial utility.It is essential to accurately describe the structures that are formed during the laser and colorseparation processes in order to develop practical laser coloring applications.Due to the high oxidation sensitivity of Labasedmetallic glass,it can broaden the color range but make it more complex.Structure coloring by laser processing on thesurface of La-based metallic glass can be conducted after thermoplastic forming.It is particularly important to clarify therole of structure and composition in the surface coloring process.The aim is to study the relationship between amorphoussurface structural color,surface geometry,and oxide formation by laser processing in metallic glasses.The findings revealedthat the periodic structure primarily determines the surface color at laser energy densities below 1.0 J/mm^(2).In contrast,thesurface color predominantly depends on the proportion of oxides that are formed when energy densities exceed 1.0 J/mm^(2).Consequently,this study provides a novel concept for the fundamental investigation of laser coloring and establishes a newavenue for practical application.展开更多
Curved-beams can be used to design modular multistable metamaterials(MMMs)with reprogrammable material properties,i.e.,programmable curved-beam periodic structure(PCBPS),which is promising for controlling the elastic ...Curved-beams can be used to design modular multistable metamaterials(MMMs)with reprogrammable material properties,i.e.,programmable curved-beam periodic structure(PCBPS),which is promising for controlling the elastic wave propagation.The PCBPS is theoretically equivalent to a spring-oscillator system to investigate the mechanism of bandgap,analyze the wave propagation mechanisms,and further form its geometrical and physical criteria for tuning the elastic wave propagation.With the equivalent model,we calculate the analytical solutions of the dispersion relations to demonstrate its adjustability,and investigate the wave propagation characteristics through the PCBPS.To validate the equivalent system,the finite element method(FEM)is employed.It is revealed that the bandgaps of the PCBPS can be turned on-and-off and shifted by varying its physical and geometrical characteristics.The findings are highly promising for advancing the practical application of periodic structures in wave insulation and propagation control.展开更多
Ceramic matrix composites(CMC)are widely utilized in high-temperature components of aero-engines for load-bearing and electromagnetic stealth synergy due to their superior toughening and designable electromagnetic pro...Ceramic matrix composites(CMC)are widely utilized in high-temperature components of aero-engines for load-bearing and electromagnetic stealth synergy due to their superior toughening and designable electromagnetic properties.However,the design of ultra-broadband electromagnetic wave(EMW)absorp-tion at thin thicknesses(d<10 mm)has been difficult and focused,especially the design of metama-terial.Inspired by 3D printing technology and the structural characteristic of 2D CMC,this study inge-niously devised and proposed a novel carbon fiber gradient periodic structure in Al_(2)O_(3f)/SiOC composites to enhance the ultra-broadband EMW absorption properties at a wide temperature range.By optimizing the geometric structure parameters,the Al_(2)O_(3f)/SiOC composites with the carbon fiber gradient periodic structure have exhibited exceptional ultra-broadband EMW absorption properties at elevated tempera-tures and excellent mechanical performance.The composites have attained a minimum reflection loss(RLmin)of-30 dB and a high absorption efficiency of more than 84%,ranging from 9.3 to 40 GHz at a thickness of 9 mm.Due to the temperature insensitivity of discrete periodic structures,the composites can adapt to high temperatures up to 700℃.Additionally,compared to the Al_(2)O_(3f)/SiOC composites,the flexural strength and fracture toughness of the Al_(2)O_(3f)/SiOC composites with carbon fiber gradient peri-odic structure have significantly increased to 398 MPa and 15.6 MPa m1/2,respectively.This work breaks through the limitation of the design and fabrication of 3D periodic structures in CMC,creating a novel oxide-CMC with ultra-broadband EMW absorption properties at a wide temperature range and enhanced mechanical properties.展开更多
Improving the shape memory effect and superelasticity of Cu-based shape memory alloys(SMAs)has always been a research hotspot in many countries.This work systematically investigates the effects of Gyroid triply period...Improving the shape memory effect and superelasticity of Cu-based shape memory alloys(SMAs)has always been a research hotspot in many countries.This work systematically investigates the effects of Gyroid triply periodic minimal surface(TPMS)lattice structures with different unit sizes and volume fractions on the manufacturing viability,compressive mechanical response,superelasticity and heating recovery properties of CuAlMn SMAs.The results show that the increased specific surface area of the lattice structure leads to increased powder adhesion,making the manufacturability proportional to the unit size and volume fraction.The compressive response of the CuAlMn SMAs Gyroid TPMS lattice structure is negatively correlated with the unit size and positively correlated with the volume fraction.The superelastic recovery of all CuAlMn SMAs with Gyroid TPMS lattice structures is within 5%when the cyclic cumulative strain is set to be 10%.The lattice structure shows the maximum superelasticity when the unit size is 3.00 mm and the volume fraction is 12%,and after heating recovery,the total recovery strain increases as the volume fraction increases.This study introduces a new strategy to enhance the superelastic properties and expand the applications of CuAlMn SMAs in soft robotics,medical equipment,aerospace and other fields.展开更多
The experimental realization of observable phonon angular momentum(PAM)in feasible systems using relatively simple methods remains a critical challenge.Motivated by the chiral-induced spin selectivity effect,this stud...The experimental realization of observable phonon angular momentum(PAM)in feasible systems using relatively simple methods remains a critical challenge.Motivated by the chiral-induced spin selectivity effect,this study explores the generation of PAM during the transport of electrically driven polarons along a singlestranded helix structure.We demonstrate that the motion of a polaron under an applied electric field inherently induces a finite PAM,exhibiting drift-locked behavior between the PAM and the polaron.By analyzing the time evolution of PAM distribution at each site,we identify the observed PAM as a natural consequence of coherent superposition between lattice waves,in which the chiral structure selectively determines the direction of induced PAM.Furthermore,we examine the roles of two types of electron-phonon interactions and structural periodicity in modulating PAM.These findings highlight the potential of chiral molecules as platforms for PAM generation and offer new insights into developing phonon-spin-based devices for information processing and transmission.展开更多
The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction ...The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction is Ni3Si/（T＋γ）/γ/…T/γ/Ni4Zn12Si3/γ/…Ni4Zn12Si3/γ/Ni4Zn12Si3/δ…/Ni4Zn12Si3/δ/liquid-Zn, and the diffusion path in solid-vapor reaction is Ni3Si/θ/（T＋γ）/γ/…/T/γ/…T/γ/vapor-Zn. With increasing Zn diffusion flux, the diffusion reaction path moves toward the Zn-rich direction, and the distance from the Ni3Si substrate to the periodic layer pair nearest to the interface decreases. In the initial stage of both reactions,γphase nucleates and grows within T matrix phase at first, and then conjuncts together to form a band to reduce the surface energy. Based on the experimental results and diffusion kinetics analysis, the microstructure differences were compared and the formation mechanism of the periodic layered structure in Ni3Si/Zn system was discussed.展开更多
In this paper,the multi-scale computational method for a structure of composite materials with a small periodic configuration under the coupled thermoelasticity condition is presented. The two-scale asymptotic(TSA)exp...In this paper,the multi-scale computational method for a structure of composite materials with a small periodic configuration under the coupled thermoelasticity condition is presented. The two-scale asymptotic(TSA)expression of the displacement and the increment of temperature for composite materials with a small periodic configuration under the condition of thermoelasticity are briefly shown at first,then the multi-scale finite element algorithms based on TSA are discussed.Finally the numerical results evaluated by the multi-scale computational method are shown.It demonstrates that the basic configuration and the increment of temperature strongly influence the local strains and local stresses inside a basic cell.展开更多
This paper is concerned with the dynamic behaviors of wave propagation in layered periodic composites consisting of piezoelectric and piezomagnetic phases. The dispersion relations of Lamb waves axe derived. Dispersio...This paper is concerned with the dynamic behaviors of wave propagation in layered periodic composites consisting of piezoelectric and piezomagnetic phases. The dispersion relations of Lamb waves axe derived. Dispersion curves and displacement fields are calculated with different piezoelectric volume fractions. Numerical results for BaTiO3/CoFe2O4 composites show that the dispersion curves resemble the symmetric Lamb waves in a plate. Exchange between the longitudinal （i.e. thickness） mode and coupled mode takes place at the crossover point between dispersion curves of the first two branches. With the increase of BaTiO3 volume fraction, the crossover point appears at a lower wave number and wave velocity is higher. These findings are useful for magnetoelectric transducer applications.展开更多
Excessive vibration and noise radiation of the track structure can be caused by the operation of high speed trains.Though the track structure is characterized by obvious periodic properties and band gaps,the bandwidth...Excessive vibration and noise radiation of the track structure can be caused by the operation of high speed trains.Though the track structure is characterized by obvious periodic properties and band gaps,the bandwidth is narrow and the elastic wave attenuation capability within the band gap is weak.In order to effectively control the vibration and noise of track structure,the local resonance mechanism is introduced to broaden the band gap and realize wave propagation control.The locally resonant units are attached periodically on the rail,forming a new locally resonant phononic crystal structure.Then the tuning of the elastic wave band gaps of track structure is discussed,and the formation mechanism of the band gap is explicated.The research results show that a new wide and adjustable locally resonant band gap is formed after the resonant units are introduced.The phenomenon of coupling and transition can be observed between the new locally resonant band gap and the original band gap of the periodic track structure with the band gap width reaching the maximum at the coupling position.The broader band gap can be applied for vibration and noise reduction in high speed railway track structure.展开更多
Inhomogeneity and low efficiency are two important factors that limit the application of laser-induced periodic surface structures(LIPSSs),especially on glass surfaces.In this study,two-beam interference(TBI)of femtos...Inhomogeneity and low efficiency are two important factors that limit the application of laser-induced periodic surface structures(LIPSSs),especially on glass surfaces.In this study,two-beam interference(TBI)of femtosecond lasers was used to produce large-area straight LIPSSs on fused silica using cylindrical lenses.Compared with those produced us-ing a single circular or cylindrical lens,the LIPSSs produced by TBI are much straighter and more regular.Depending on the laser fluence and scanning velocity,LIPSSs with grating-like or spaced LIPSSs are produced on the fused silica sur-face.Their structural colors are blue,green,and red,and only green and red,respectively.Grating-like LIPSS patterns oriented in different directions are obtained and exhibit bright and vivid colors,indicating potential applications in surface coloring and anti-counterfeiting logos.展开更多
Considering the mechnoelectrical coupling, the localization of SH-waves in disordered periodic layered piezoelectric structures is studied. The waves propagating in directions normal and tangential to the layers are c...Considering the mechnoelectrical coupling, the localization of SH-waves in disordered periodic layered piezoelectric structures is studied. The waves propagating in directions normal and tangential to the layers are considered. The transfer matrices between two consecutive unit cells are obtained according to the continuity conditions. The expressions of localization factor and localization length in the disordered periodic structures are presented. For the disordered periodic piezoelectric structures, the numerical results of localization factor and localization length are presented and discussed. It can be seen from the results that the frequency passbands and stopbands appear for the ordered periodic structures and the wave localization phenomenon occurs in the disordered periodic ones, and the larger the coefficient of variation is, the greater the degree of wave localization is. The widths of stopbands in the ordered periodic structures are very narrow when the properties of the consecutive piezoelectric materials are similar and the intervals of stopbands become broader when a certain material parameter has large changes. For the wave propagating in the direction normal to the layers the localization length has less dependence on the frequency, but for the wave propagating in the direction tangential to the layers the localization length is strongly dependent on the frequency.展开更多
The band structures of both in-plane and anti-plane elastic waves propagating in two-dimensional ordered and disordered （in one direction） phononic crystals are studied in this paper. The localization of wave propag...The band structures of both in-plane and anti-plane elastic waves propagating in two-dimensional ordered and disordered （in one direction） phononic crystals are studied in this paper. The localization of wave propagation due to random disorder is discussed by introducing the concept of the localization factor that is calculated by the plane-wave-based transfer-matrix method. By treating the quasi-periodicity as the deviation from the periodicity in a special way, two kinds of quasi phononic crystal that has quasi-periodicity （Fibonacci sequence） in one direction and translational symmetry in the other direction are considered and the band structures are characterized by using localization factors. The results show that the localization factor is an effective parameter in characterizing the band gaps of two-dimensional perfect, randomly disordered and quasi-periodic phononic crystals. Band structures of the phononic crystals can be tuned by different random disorder or changing quasi-periodic parameters. The quasi phononic crystals exhibit more band gaps with narrower width than the ordered and randomly disordered systems.展开更多
Active control of bending waves in a periodic beam by the Timoshenko beam theory is concerned. A discussion about the possible wave solutions for periodic beams and their control by forces is presented. Wave propagati...Active control of bending waves in a periodic beam by the Timoshenko beam theory is concerned. A discussion about the possible wave solutions for periodic beams and their control by forces is presented. Wave propagation in a periodic beam is studied. The transfer matrix between two consecutive unit cells is obtained based on the continuity conditions. Wave amplitudes are derived by employing the Bloch-Floquet theorem and the transfer matrix. The influences of the propagating constant on the wave amplitudes are considered. It is shown that vibrations are still needed to be suppressed in the pass-band regions. Wave-suppression strategy described in this paper is employed to eliminate the propagating disturbance of an infinite periodic beam. A minimum wave-suppression strategy is compared with the classical wave-suppression strategy.展开更多
As a promising numerical tool of structural dynamics in mid- and high frequencies, the wave and finite element method（WFEM） is receiving increasingly attention and applications. In this paper, an enhanced WFEM has b...As a promising numerical tool of structural dynamics in mid- and high frequencies, the wave and finite element method（WFEM） is receiving increasingly attention and applications. In this paper, an enhanced WFEM has been developed with a reduced model and a new eigenvalue scheme. The reduced model is applicable for structures with piezoelectric shunts or local dampers;the new eigenvalue scheme can mitigate the ill-conditioning when the wave basis is calculated. The enhanced WFEM is applied to a thin-wall structure with periodically distributed piezoelectric materials（PZT）. Both free wave characteristics and forced response are analyzed and the influences of the suggested enhancements are presented. It is shown that if the control factors are properly chosen, these enhancements can improve the accuracy while accelerating the calculation. Resulting from the complexity of the application, these enhancements are not optional but imperative.展开更多
The purpose of this paper is to demonstrate an integrated optimization scheme for a solar-powered drone structure.Consider a primary beam in the wing of large aspect ratio,where 100 lithium batteries are assembled.In ...The purpose of this paper is to demonstrate an integrated optimization scheme for a solar-powered drone structure.Consider a primary beam in the wing of large aspect ratio,where 100 lithium batteries are assembled.In the proposed integrated optimization,the batteries are considered here as parts of the load-carrying structure.The corresponding mechanical behaviors are simulated in the structural design and described with super-elements.The batteries layout and the structural topology are then introduced as mixed design variables and optimized simultaneously to achieve an accordant load-carrying path.Geometrical nonlinearity is considered due to the large deformation.Different periodic structural configurations are tested in the optimization in order to meet the structural manufacturing and assembly convenience.The optimized designs are rebuilt and tested in different load cases.Maintaining the same structural weight,the global mechanical performances are improved greatly compared with the initial design.展开更多
This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The exp...This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The explicit dispersion relations are derived for the two cases when the propagation directions of SH waves are normal to the interface and parallel to the interface, respectively. The asymptotic expressions for dispersion relations are also given when the wave number is extremely small. Numerical results for stop band effect and phase velocity are presented for a periodic system of alternating BaTiO3 and Terfenol-D layers. The influence of volume fraction on stop band effect and dispersion behaviors is discussed and revealed.展开更多
Titanium alloys have a wide application in aerospace industries as it has greater strength and low density, but it has poor tribological properties. To improve its friction and wear performance, in present work, a fem...Titanium alloys have a wide application in aerospace industries as it has greater strength and low density, but it has poor tribological properties. To improve its friction and wear performance, in present work, a femtosecond laser is used to directly irradiate the Ti6Al4V titanium alloy surface in air conditioning, which results in localized ablation and the formation of periodic microstructures but also a strong pressure wave, propagating the material inside. Through the optimization of processing parameters, surface modification and periodic micropatterning with effective anti-friction properties were successfully induced on the surface. After a treatment of femtosecond laser-induced surface modification(FsLSM), the surface microhardness was improved by 16.6% and compressive residual stress reached-746 MPa. Besides, laser-induced periodic surface structures(LIPSS) with a titanium oxide outer coating were fabricated uniformly on the titanium alloy surface. Rotary ball-on-disk wear experiments revealed that the average coefficient of friction(COF) and wear mass loss of the specimen with Fs LSM treatment were largely reduced by 68.9% and 90% as compared to that of untreated specimens, respectively. It was analyzed that the reason for the remarkable wear resistance was attributed to the comprehensive action of the generation of LIPSS, the titanium oxide outer coating, high amplitude compressive residual stress and gradient grain size distribution on the subsurface during the laser surface treatment. Since the findings here are broadly applicable to a wide spectrum of engineering metals and alloys, the present results offer unique pathways to enhancing the tribological performance of materials.展开更多
基金Natural Science Foundation of China under Grant No.42277130Natural Science Foundation of Shandong Province under Grant No.ZR2021ME144。
文摘With the acceleration of urbanization,environmental vibration and noise pollution have become increasingly severe,and traditional vibration and noise reduction technologies are insufficient to meet current vibration control requirements.This study,based on locally resonant theory,designed a novel local resonance periodic block(LRPB).Using the plane wave expansion method(PWEM)and the finite element method(FEM),this study investigated the bandgap characteristics,formation mechanisms,and vibration and acoustic performance of an LRPB under different periodic structures and material selection.The vibration reduction and noise reduction performance of LRPB has been validated through the Qingdao metro project.The research results show that the LRPB is superior to other periodic structures in terms of wide bandgap.Furthermore,configuring soft scatterer material,increasing the unit size,enhancing the material filling rate,and adopting a honeycomb arrangement can effectively reduce bandgap frequency.In structural design,non-high symmetry demonstrates greater advantages.In a study of a subway tunnel,the LRPB demonstrated superior vibration and noise mitigation performance compared to wave impeding block(WIB),thereby demonstrating potential for use in the field of vibration and noise reduction with regard to structures.
基金supported by the National Key Research and Development Plan of China (Grant No.2023YFB3406302)Guangdong Basic and Applied Basic Research Foundation (Grant No.2024A1515011126)the Key Research and Development Plan of Shanxi (Grant No.2024GH-ZDXM-29)。
文摘Periodic isolator is well known for its wave filtering characteristic.While in middle and high frequencies,the internal resonances of the periodic isolator are evident especially when damping is small.This study proposes a novel aperiodic vibration isolation for improving the internal resonances control of the periodic isolator.The mechanism of the internal resonances control by the aperiodic isolator is firstly explained.For comparing the internal resonances suppression effect of the aperiodic isolator with the periodic isolator,a dynamic model combing the rigid machine,the isolator,and the flexible plate is derived through multi subsystem modeling method and transfer matrix method,whose accuracy is verified through the finite element method.The influences of the aperiodicity and damping of the isolator on the vibration isolation performance and internal resonances suppression effect are investigated by numerical analysis.The numerical results demonstrate that vibration attenuation performances of the periodic isolator and aperiodic isolator are greatly over than that of the continuous isolator in middle and high frequencies.The aperiodic isolator opens the stop bandgaps comparing with the periodic isolator where the pass bandgaps are periodically existed.The damping of the isolator has the stop bandgap widening effect on both the periodic isolator and the aperiodic isolator.In addition,a parameter optimization algorithm of the aperiodic isolator is presented for improving the internal resonances control effect.It is shown that the vibration peaks within the target frequency band of the aperiodic isolator are effectively reduced after the optimization.Finally,the experiments of the three different vibration isolation systems are conducted for verifying the analysis work.
基金supports from the National Natural Science Foundation of China(12074123,12174108)the Foundation of‘Manufacturing beyond limits’of Shanghai‘Talent Program'of Henan Academy of Sciences.
文摘Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.
基金supported by the National Natural Science Foundation of China(Grant Nos.52071222 and 52471180)Guangdong Major Project of Basic and Applied Basic Research,China(Grant No.2019B030302010)+2 种基金Guangdong Basic and Applied Basic Research,China(Grant No.2020B1515130007)the National Key Research and Development Program of China(Grant No.2021YFA0716302)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB30000000).
文摘The alteration in surface color of metallic glasses(MGs)holds great significance in the context of microstructuredesign and commercial utility.It is essential to accurately describe the structures that are formed during the laser and colorseparation processes in order to develop practical laser coloring applications.Due to the high oxidation sensitivity of Labasedmetallic glass,it can broaden the color range but make it more complex.Structure coloring by laser processing on thesurface of La-based metallic glass can be conducted after thermoplastic forming.It is particularly important to clarify therole of structure and composition in the surface coloring process.The aim is to study the relationship between amorphoussurface structural color,surface geometry,and oxide formation by laser processing in metallic glasses.The findings revealedthat the periodic structure primarily determines the surface color at laser energy densities below 1.0 J/mm^(2).In contrast,thesurface color predominantly depends on the proportion of oxides that are formed when energy densities exceed 1.0 J/mm^(2).Consequently,this study provides a novel concept for the fundamental investigation of laser coloring and establishes a newavenue for practical application.
基金supported by the National Natural Science Foundation of China(Nos.12172012 and 11802005)。
文摘Curved-beams can be used to design modular multistable metamaterials(MMMs)with reprogrammable material properties,i.e.,programmable curved-beam periodic structure(PCBPS),which is promising for controlling the elastic wave propagation.The PCBPS is theoretically equivalent to a spring-oscillator system to investigate the mechanism of bandgap,analyze the wave propagation mechanisms,and further form its geometrical and physical criteria for tuning the elastic wave propagation.With the equivalent model,we calculate the analytical solutions of the dispersion relations to demonstrate its adjustability,and investigate the wave propagation characteristics through the PCBPS.To validate the equivalent system,the finite element method(FEM)is employed.It is revealed that the bandgaps of the PCBPS can be turned on-and-off and shifted by varying its physical and geometrical characteristics.The findings are highly promising for advancing the practical application of periodic structures in wave insulation and propagation control.
基金supported by the National Key R&D Program of China(No.2022YFC2204500)the Aviation Science Foundation Project(No.2023Z055053001).
文摘Ceramic matrix composites(CMC)are widely utilized in high-temperature components of aero-engines for load-bearing and electromagnetic stealth synergy due to their superior toughening and designable electromagnetic properties.However,the design of ultra-broadband electromagnetic wave(EMW)absorp-tion at thin thicknesses(d<10 mm)has been difficult and focused,especially the design of metama-terial.Inspired by 3D printing technology and the structural characteristic of 2D CMC,this study inge-niously devised and proposed a novel carbon fiber gradient periodic structure in Al_(2)O_(3f)/SiOC composites to enhance the ultra-broadband EMW absorption properties at a wide temperature range.By optimizing the geometric structure parameters,the Al_(2)O_(3f)/SiOC composites with the carbon fiber gradient periodic structure have exhibited exceptional ultra-broadband EMW absorption properties at elevated tempera-tures and excellent mechanical performance.The composites have attained a minimum reflection loss(RLmin)of-30 dB and a high absorption efficiency of more than 84%,ranging from 9.3 to 40 GHz at a thickness of 9 mm.Due to the temperature insensitivity of discrete periodic structures,the composites can adapt to high temperatures up to 700℃.Additionally,compared to the Al_(2)O_(3f)/SiOC composites,the flexural strength and fracture toughness of the Al_(2)O_(3f)/SiOC composites with carbon fiber gradient peri-odic structure have significantly increased to 398 MPa and 15.6 MPa m1/2,respectively.This work breaks through the limitation of the design and fabrication of 3D periodic structures in CMC,creating a novel oxide-CMC with ultra-broadband EMW absorption properties at a wide temperature range and enhanced mechanical properties.
基金supported by the National Natural Science Foundation of China(No.51974028)the Fundamental Research Funds for the Central Universities(No.2021JCCXJD01)the Key R&D and transformation projects in Qinghai Province(No.2023-HZ-801).
文摘Improving the shape memory effect and superelasticity of Cu-based shape memory alloys(SMAs)has always been a research hotspot in many countries.This work systematically investigates the effects of Gyroid triply periodic minimal surface(TPMS)lattice structures with different unit sizes and volume fractions on the manufacturing viability,compressive mechanical response,superelasticity and heating recovery properties of CuAlMn SMAs.The results show that the increased specific surface area of the lattice structure leads to increased powder adhesion,making the manufacturability proportional to the unit size and volume fraction.The compressive response of the CuAlMn SMAs Gyroid TPMS lattice structure is negatively correlated with the unit size and positively correlated with the volume fraction.The superelastic recovery of all CuAlMn SMAs with Gyroid TPMS lattice structures is within 5%when the cyclic cumulative strain is set to be 10%.The lattice structure shows the maximum superelasticity when the unit size is 3.00 mm and the volume fraction is 12%,and after heating recovery,the total recovery strain increases as the volume fraction increases.This study introduces a new strategy to enhance the superelastic properties and expand the applications of CuAlMn SMAs in soft robotics,medical equipment,aerospace and other fields.
基金supported by the National Key R&D Project from Ministry of Science and Technology of China(Grant No.2022YFA1203100)the National Natural Science Foundation of China(Grant No.52350088)+1 种基金the Department of Science and Technology of Jiangsu Province(Grant No.BK20220032)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX241797)。
文摘The experimental realization of observable phonon angular momentum(PAM)in feasible systems using relatively simple methods remains a critical challenge.Motivated by the chiral-induced spin selectivity effect,this study explores the generation of PAM during the transport of electrically driven polarons along a singlestranded helix structure.We demonstrate that the motion of a polaron under an applied electric field inherently induces a finite PAM,exhibiting drift-locked behavior between the PAM and the polaron.By analyzing the time evolution of PAM distribution at each site,we identify the observed PAM as a natural consequence of coherent superposition between lattice waves,in which the chiral structure selectively determines the direction of induced PAM.Furthermore,we examine the roles of two types of electron-phonon interactions and structural periodicity in modulating PAM.These findings highlight the potential of chiral molecules as platforms for PAM generation and offer new insights into developing phonon-spin-based devices for information processing and transmission.
基金Projects(51271040,51171031)supported by the National Natural Science Foundation of ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘The formation of periodic layered structure in Ni3Si/Zn diffusion couples with Zn in vapor or liquid state was investigated by SEM-EDS, FESEM and XRD. The results show that the diffusion path in solid-liquid reaction is Ni3Si/（T＋γ）/γ/…T/γ/Ni4Zn12Si3/γ/…Ni4Zn12Si3/γ/Ni4Zn12Si3/δ…/Ni4Zn12Si3/δ/liquid-Zn, and the diffusion path in solid-vapor reaction is Ni3Si/θ/（T＋γ）/γ/…/T/γ/…T/γ/vapor-Zn. With increasing Zn diffusion flux, the diffusion reaction path moves toward the Zn-rich direction, and the distance from the Ni3Si substrate to the periodic layer pair nearest to the interface decreases. In the initial stage of both reactions,γphase nucleates and grows within T matrix phase at first, and then conjuncts together to form a band to reduce the surface energy. Based on the experimental results and diffusion kinetics analysis, the microstructure differences were compared and the formation mechanism of the periodic layered structure in Ni3Si/Zn system was discussed.
基金The project supported by the National Natural Science Foundation of China(19932030)Special Funds for Major State Basic Research Projects
文摘In this paper,the multi-scale computational method for a structure of composite materials with a small periodic configuration under the coupled thermoelasticity condition is presented. The two-scale asymptotic(TSA)expression of the displacement and the increment of temperature for composite materials with a small periodic configuration under the condition of thermoelasticity are briefly shown at first,then the multi-scale finite element algorithms based on TSA are discussed.Finally the numerical results evaluated by the multi-scale computational method are shown.It demonstrates that the basic configuration and the increment of temperature strongly influence the local strains and local stresses inside a basic cell.
基金supported by the National Natural Science Foundation of China(Nos.10672108 and 10632020)the key project of the Ministry of Education of China(No.206014).
文摘This paper is concerned with the dynamic behaviors of wave propagation in layered periodic composites consisting of piezoelectric and piezomagnetic phases. The dispersion relations of Lamb waves axe derived. Dispersion curves and displacement fields are calculated with different piezoelectric volume fractions. Numerical results for BaTiO3/CoFe2O4 composites show that the dispersion curves resemble the symmetric Lamb waves in a plate. Exchange between the longitudinal （i.e. thickness） mode and coupled mode takes place at the crossover point between dispersion curves of the first two branches. With the increase of BaTiO3 volume fraction, the crossover point appears at a lower wave number and wave velocity is higher. These findings are useful for magnetoelectric transducer applications.
基金Project(2016YFE0205200)supported by the National Key Research and Development Program of ChinaProjects(51425804,51508479)supported by the National Natural Science Foundation of China+1 种基金Project(2016310019)supported by the Doctorial Innovation Fund of Southwest Jiaotong University,ChinaProject(2017GZ0373)supported by the Research Fund for Key Research and Development Projects in Sichuan Province,China
文摘Excessive vibration and noise radiation of the track structure can be caused by the operation of high speed trains.Though the track structure is characterized by obvious periodic properties and band gaps,the bandwidth is narrow and the elastic wave attenuation capability within the band gap is weak.In order to effectively control the vibration and noise of track structure,the local resonance mechanism is introduced to broaden the band gap and realize wave propagation control.The locally resonant units are attached periodically on the rail,forming a new locally resonant phononic crystal structure.Then the tuning of the elastic wave band gaps of track structure is discussed,and the formation mechanism of the band gap is explicated.The research results show that a new wide and adjustable locally resonant band gap is formed after the resonant units are introduced.The phenomenon of coupling and transition can be observed between the new locally resonant band gap and the original band gap of the periodic track structure with the band gap width reaching the maximum at the coupling position.The broader band gap can be applied for vibration and noise reduction in high speed railway track structure.
文摘Inhomogeneity and low efficiency are two important factors that limit the application of laser-induced periodic surface structures(LIPSSs),especially on glass surfaces.In this study,two-beam interference(TBI)of femtosecond lasers was used to produce large-area straight LIPSSs on fused silica using cylindrical lenses.Compared with those produced us-ing a single circular or cylindrical lens,the LIPSSs produced by TBI are much straighter and more regular.Depending on the laser fluence and scanning velocity,LIPSSs with grating-like or spaced LIPSSs are produced on the fused silica sur-face.Their structural colors are blue,green,and red,and only green and red,respectively.Grating-like LIPSS patterns oriented in different directions are obtained and exhibit bright and vivid colors,indicating potential applications in surface coloring and anti-counterfeiting logos.
基金The project supported by National Natural Science Foundation of China (10632020, 10672017 and 20451057)
文摘Considering the mechnoelectrical coupling, the localization of SH-waves in disordered periodic layered piezoelectric structures is studied. The waves propagating in directions normal and tangential to the layers are considered. The transfer matrices between two consecutive unit cells are obtained according to the continuity conditions. The expressions of localization factor and localization length in the disordered periodic structures are presented. For the disordered periodic piezoelectric structures, the numerical results of localization factor and localization length are presented and discussed. It can be seen from the results that the frequency passbands and stopbands appear for the ordered periodic structures and the wave localization phenomenon occurs in the disordered periodic ones, and the larger the coefficient of variation is, the greater the degree of wave localization is. The widths of stopbands in the ordered periodic structures are very narrow when the properties of the consecutive piezoelectric materials are similar and the intervals of stopbands become broader when a certain material parameter has large changes. For the wave propagating in the direction normal to the layers the localization length has less dependence on the frequency, but for the wave propagating in the direction tangential to the layers the localization length is strongly dependent on the frequency.
基金supported by the National Natural Science Foundation of China(No.10632020).
文摘The band structures of both in-plane and anti-plane elastic waves propagating in two-dimensional ordered and disordered （in one direction） phononic crystals are studied in this paper. The localization of wave propagation due to random disorder is discussed by introducing the concept of the localization factor that is calculated by the plane-wave-based transfer-matrix method. By treating the quasi-periodicity as the deviation from the periodicity in a special way, two kinds of quasi phononic crystal that has quasi-periodicity （Fibonacci sequence） in one direction and translational symmetry in the other direction are considered and the band structures are characterized by using localization factors. The results show that the localization factor is an effective parameter in characterizing the band gaps of two-dimensional perfect, randomly disordered and quasi-periodic phononic crystals. Band structures of the phononic crystals can be tuned by different random disorder or changing quasi-periodic parameters. The quasi phononic crystals exhibit more band gaps with narrower width than the ordered and randomly disordered systems.
基金Project supported by the National Natural Science Foundation of China (No. 11102047)Special Funds of Central Basic Scientific Research Operating Expensesthe Fundamental Research Foundation of Harbin Engineering University(No. 002110260746)
文摘Active control of bending waves in a periodic beam by the Timoshenko beam theory is concerned. A discussion about the possible wave solutions for periodic beams and their control by forces is presented. Wave propagation in a periodic beam is studied. The transfer matrix between two consecutive unit cells is obtained based on the continuity conditions. Wave amplitudes are derived by employing the Bloch-Floquet theorem and the transfer matrix. The influences of the propagating constant on the wave amplitudes are considered. It is shown that vibrations are still needed to be suppressed in the pass-band regions. Wave-suppression strategy described in this paper is employed to eliminate the propagating disturbance of an infinite periodic beam. A minimum wave-suppression strategy is compared with the classical wave-suppression strategy.
基金the company PSA Peugeot Citroёn for the financial support
文摘As a promising numerical tool of structural dynamics in mid- and high frequencies, the wave and finite element method（WFEM） is receiving increasingly attention and applications. In this paper, an enhanced WFEM has been developed with a reduced model and a new eigenvalue scheme. The reduced model is applicable for structures with piezoelectric shunts or local dampers;the new eigenvalue scheme can mitigate the ill-conditioning when the wave basis is calculated. The enhanced WFEM is applied to a thin-wall structure with periodically distributed piezoelectric materials（PZT）. Both free wave characteristics and forced response are analyzed and the influences of the suggested enhancements are presented. It is shown that if the control factors are properly chosen, these enhancements can improve the accuracy while accelerating the calculation. Resulting from the complexity of the application, these enhancements are not optional but imperative.
基金This work is supported by Key Project of Natural Science Foundation of China(Nos.51790171,51761145111,51735005)Natural Science Foundation of China for Excellent Young Scholars(No.11722219).
文摘The purpose of this paper is to demonstrate an integrated optimization scheme for a solar-powered drone structure.Consider a primary beam in the wing of large aspect ratio,where 100 lithium batteries are assembled.In the proposed integrated optimization,the batteries are considered here as parts of the load-carrying structure.The corresponding mechanical behaviors are simulated in the structural design and described with super-elements.The batteries layout and the structural topology are then introduced as mixed design variables and optimized simultaneously to achieve an accordant load-carrying path.Geometrical nonlinearity is considered due to the large deformation.Different periodic structural configurations are tested in the optimization in order to meet the structural manufacturing and assembly convenience.The optimized designs are rebuilt and tested in different load cases.Maintaining the same structural weight,the global mechanical performances are improved greatly compared with the initial design.
基金supported by the National Natural Science Foundation of China (Nos.10672108,10572069 and 10820101048)
文摘This paper investigates shear horizontal （SH） waves propagating in a periodically layered structure that consists of piezoelectric （PE） layers perfectly bonded with piezomagnetic （PM） layers alternately. The explicit dispersion relations are derived for the two cases when the propagation directions of SH waves are normal to the interface and parallel to the interface, respectively. The asymptotic expressions for dispersion relations are also given when the wave number is extremely small. Numerical results for stop band effect and phase velocity are presented for a periodic system of alternating BaTiO3 and Terfenol-D layers. The influence of volume fraction on stop band effect and dispersion behaviors is discussed and revealed.
基金co-supported by the Key-Area Research and Development Program of Guangdong Province(No.2018B090906002)the National Natural Science Foundation of China(No.51875574)the National Science and Technology Major Project of China(No.2017-Ⅶ-0003-0096-1)。
文摘Titanium alloys have a wide application in aerospace industries as it has greater strength and low density, but it has poor tribological properties. To improve its friction and wear performance, in present work, a femtosecond laser is used to directly irradiate the Ti6Al4V titanium alloy surface in air conditioning, which results in localized ablation and the formation of periodic microstructures but also a strong pressure wave, propagating the material inside. Through the optimization of processing parameters, surface modification and periodic micropatterning with effective anti-friction properties were successfully induced on the surface. After a treatment of femtosecond laser-induced surface modification(FsLSM), the surface microhardness was improved by 16.6% and compressive residual stress reached-746 MPa. Besides, laser-induced periodic surface structures(LIPSS) with a titanium oxide outer coating were fabricated uniformly on the titanium alloy surface. Rotary ball-on-disk wear experiments revealed that the average coefficient of friction(COF) and wear mass loss of the specimen with Fs LSM treatment were largely reduced by 68.9% and 90% as compared to that of untreated specimens, respectively. It was analyzed that the reason for the remarkable wear resistance was attributed to the comprehensive action of the generation of LIPSS, the titanium oxide outer coating, high amplitude compressive residual stress and gradient grain size distribution on the subsurface during the laser surface treatment. Since the findings here are broadly applicable to a wide spectrum of engineering metals and alloys, the present results offer unique pathways to enhancing the tribological performance of materials.
