A random synthesis procedure based on finite fault model is adopted for near field strong ground motion simulation in this paper. The fault plane of the source is divided into a number of sub-sources, the whole moment...A random synthesis procedure based on finite fault model is adopted for near field strong ground motion simulation in this paper. The fault plane of the source is divided into a number of sub-sources, the whole moment magnitude is also divided into more sub-events. The Fourier spectrum of ground motion caused by a sub-event in given sub-source, then can be derived by means of taking the point source spectrum, attenuation with distance, energy dissipation, and near surface effect, into account. A time history is synthesized from this amplitude spectrum and a random phase spectrum, and being combined with an envelope function. The ground motion is worked out by superposition of all time histories from each sub-event in each sub-source, with time lags determining by the differences between the triggering times of sub-events and distances of the sub-sources. From the example of simulations at 21 near field points in a scenario earthquake with 4 dip angles of the fault plane, it is illustrated that the procedure can describe the rupture directivity and hanging wall effect very well. To validate the procedure, the response spectra and time histories recorded at three near fault stations MCN, LV3 and PCD during the Northridge earthquake in 1994, are compared with the simulated ones.展开更多
With the recent development of digital Micro Electro Mechanical System （MEMS） sensors, the cost of monitoring and detecting seismic events in real time can be greatly reduced. Ability of MEMS accelerograph to record...With the recent development of digital Micro Electro Mechanical System （MEMS） sensors, the cost of monitoring and detecting seismic events in real time can be greatly reduced. Ability of MEMS accelerograph to record a seismic event depends upon the efficiency of triggering algorithm, apart from the sensor＇s sensitivity. There are several classic triggering algorithms developed to detect seismic events, ranging from basic amplitude threshold to more sophisticated pattern recognition. Algorithms based on STA/LTA are reported to be computationally efficient for real time monitoring. In this paper, we analyzed several STA/LTA algorithms to check their efficiency and suitability using data obtained from the Quake Catcher Network （network of MEMS accelerometer stations）. We found that most of the STA/LTA algorithms are suitable for use with MEMS accelerometer data to accurately detect seismic events. However, the efficiency of any particular algorithm is found to be dependent on the parameter set used （i.e., window width of STA, LTA and threshold level）.展开更多
Taking Tianjin as an example, this paper proposed a methodology and process for evaluating near-fault strong ground motions from future earthquakes to mitigate earthquake damage for the metropolitan area and important...Taking Tianjin as an example, this paper proposed a methodology and process for evaluating near-fault strong ground motions from future earthquakes to mitigate earthquake damage for the metropolitan area and important engineering structures. The result of strong ground motion was predicted for Tianjin main faults by the hybrid method which mainly con- sists of 3D finite difference method and stochastic Green＇s function. Simulation is performed for 3D structures of Tianjin re- gion and characterized asperity models. The characterized asperity model describing source heterogeneity is introduced fol- lowing the fault information from the project of Tianjin Active Faults and Seismic Hazard Assessment. We simulated the worst case that two earthquakes separately occur. The results indicate that the fault position, rupture process and the sedi- mentary deposits of the basin significantly affect amplification of the simulated ground motion. Our results also demonstrate the possibility of practical simulating wave propagation including basin induced surface waves in broad frequency-band, for seismic hazard analysis near the fault from future earthquakes in urbanized areas.展开更多
In this paper, the mobile strong ground motion observation for the destructive earthquake is introduced. Considering the characteristics and its spatial distributions of aftershock, 59 strong ground motion instruments...In this paper, the mobile strong ground motion observation for the destructive earthquake is introduced. Considering the characteristics and its spatial distributions of aftershock, 59 strong ground motion instruments were installed along the Longrnenshan fault area, and more than 2 000 records have been accumulated. It shows that it is necessary to perform the mobile strong ground motion observation after the destructive earthquake, and the precious collected data could be applied for further research.展开更多
The notion of equivalent dispersion of strong seismic waves is further illuminated and a frequency-dependentstochastic model of the Fourier phase of strong earthquake ground motion is presented for use in statistical ...The notion of equivalent dispersion of strong seismic waves is further illuminated and a frequency-dependentstochastic model of the Fourier phase of strong earthquake ground motion is presented for use in statistical estimates of the Fourier phase. The non-stationary features of design ground motions synthesized using the phasemodel in combination with the empirical attenuation model of amplitude spectra of strong ground motion are ableto be consistent with those of observed records in the sense of statistics.展开更多
A method to predict near-field strong ground motions for scenario earthquakes on active faults is proposed. First, macro-source parameters characterizing the entire source area, i.e., global source parameters, includi...A method to predict near-field strong ground motions for scenario earthquakes on active faults is proposed. First, macro-source parameters characterizing the entire source area, i.e., global source parameters, including fault length, fault width, rupture area, average slip on the fault plane, etc., are estimated by seismogeology survey, seismicity and seismic scaling laws. Second, slip distributions characterizing heterogeneity or roughness on the fault plane, i.e., local source parameters, are reproduced/evaluated by the hybrid slip model. Finally, the finite fault source model, developed from both the global and local source parameters, is combined with the stochastically synthetic technique of ground motion using the dynamic comer frequency based on seismology. The proposed method is applied to simulate the acceleration time histories on three base-rock stations during the 1994 Northridge earthquake. Comparisons between the predicted and recorded acceleration time histories show that the method is feasible and practicable.展开更多
On the assumption that seismic source is simplified as linear rupture fault with finite length, this paper qualitatively studies the seismic source effects on space correlation of strong ground motion. Based on expand...On the assumption that seismic source is simplified as linear rupture fault with finite length, this paper qualitatively studies the seismic source effects on space correlation of strong ground motion. Based on expanding expression of Fourier spectrum of strong ground motion with space coordinate variables, this paper also gives a expression of describing correlation of strong ground motion field. According to far-field condition, the theoretical formula of the expression can be obtained. Furthermore, this paper presents a theoretical formula of estimation the radius of strong ground motion field, which depends on expansion condition of Fourier spectrum of strong ground motion, with space variables. At last, taking one earthquake as an example, this paper gives three-dimension patterns of radius of the field with epicenter distance and azimuth as well as frequency.展开更多
Seismic hazard assessment based on urban active faults can provide scientific bases for city planning and project construction, while numerical simulation of strong ground motion is an important method for seismic haz...Seismic hazard assessment based on urban active faults can provide scientific bases for city planning and project construction, while numerical simulation of strong ground motion is an important method for seismic hazard prediction and assessment. A 3-D physical model in conformity with real strata configuration of （mainly） the Quaternary is a prerequisite to ensure the reliability of the simulation results. In this paper, we give a detailed account of the technical scheme and process for creating a 3-D physical model in Kunming basin. The data used are synthe- sized from seismogeological data, borehole data, topographic data, digital elevation mode （DEM） data, seismic exploration results and wave velocity measurements. Strafigraphic division is based mainly on shear wave velocity, with strata sequence taken into consideration. The model construction is finally accomplished with ArcGIS and many relevant programming techniques via layer-by-layer stacking （in depth direction） of the adjacent medium interfaces （meshes）. Meanwhile, a database of 3-D physical models is set up, which provides model data and parameters for strong ground motion simulation. Some processing methods and significant issues are also addressed in the paper in accordance with different types of exploration and experimental data.展开更多
On the basis of previous study of the 1679 Sanhe-Pinggu(M8.0) earthquake,the biggest event in history ever recorded in Beijing and its adjacent area,we made a 3-D strong ground motion simulation utilizing the staggere...On the basis of previous study of the 1679 Sanhe-Pinggu(M8.0) earthquake,the biggest event in history ever recorded in Beijing and its adjacent area,we made a 3-D strong ground motion simulation utilizing the staggered-grid finite differences method to study the distributions of peak ground velocity with different earthquake source models in the Beijing region.In the paper,earthquake source models and a transmission medium velocity model are established and the corresponding parameters are given in accordance to the results from a related previous study.Then,using a three-dimensional finite difference computing program of near-fault strong ground motion developed by Graves,the peak ground velocity caused by a destructive earthquake in the Beijing area is simulated.In our computation model,the earthquake source is 3km in depth,and a total number of 21,679 observation points on the ground surface are figured out.The transmission medium velocity model is composed of four stratums which are the Quaternary deposit,the upper crust,the upper part of the middle crust and the lower part of the middle crust.With the minimum grid spacing of 0.15km,a total of 2.28×106 grids are generated.Using a time step of 0.02 seconds we calculated the peak ground velocity for a duration of 8 seconds.After the analysis of the simulation results,we observed some basic characteristics of near-fault strong ground motion such as the concentration effect of near-fault peak ground velocity,rupture directivity effect,hanging wall effect,and basin effect.The results from our simulation and analysis suggest that the source and transmitting medium parameters in our model are suitable and the finite difference method is applicable to estimate the distribution of strong ground motion in the study region.展开更多
Joint inversion of teleseismic body-wave data and strong ground motion waveforms was applied to determine the rupture process of the 2010 Mentawai earthquake. To obtain stable solutions, smoothing and non-negative con...Joint inversion of teleseismic body-wave data and strong ground motion waveforms was applied to determine the rupture process of the 2010 Mentawai earthquake. To obtain stable solutions, smoothing and non-negative constraints were introduced. A total of 33 teleseismic stations and 5 strong ground motion stations supplied data. The teleseismic and strong ground motion data were separately windowed for 150 s and 250 s and bandpass filtered with frequencies of 0.001e1.0 Hz and 0.005e0.5 Hz, respectively. The finitefault model was established with length and width of 190 km and 70 km, and the initial seismic source parameters were set by referring to centroid moment tensor(CMT) solutions. Joint inversion results indicate that the focal mechanism of this earthquake is thrust fault type, and the strike, dip, and rake angles are generally in accordance with CMT results. The seismic moment was determined as 5.814 1020Nm(Mw7.8) and source duration was about 102 s, which is greater than those of other earthquakes of similar magnitude. The rupture nucleated near the hypocenter and then propagated along the strike direction to the northwest, with a maximum slip of 3.9 m. Large uncertainties regarding the amount of slip retrieved using different inversion methods still exist; however, the conclusion that the majority of slip occurred far from the islands at very shallow depths was found to be robust. The 2010 Mentawai earthquake was categorized as a tsunami earthquake because of the long rupture duration and the generation of a tsunami much larger than was expected for an earthquake of its magnitude.展开更多
The Sichuan-Yunnan region,at the southeastern edge of the Tibetan Plateau,exhibits highly complex crustal structures and frequent seismicity driven by the ongoing collision between the Indian and Eurasian plates.Physi...The Sichuan-Yunnan region,at the southeastern edge of the Tibetan Plateau,exhibits highly complex crustal structures and frequent seismicity driven by the ongoing collision between the Indian and Eurasian plates.Physics-based simulations of strong ground motion are critical for reliable seismic hazard assessment in this tectonically active region.In recent years,multiple 3D velocity models have been developed for the Sichuan-Yunnan region using various datasets and methods.However,systematic studies evaluating how different velocity models affect strong ground motion simulation results are still scarce.In this study,we simulate strong ground motion for the M_(w)6.6 Luding earthquake that occurred on September 5,2022,using a finite-fault rupture model derived from observational data and a suite of different velocity models.We assess the reliability of each velocity model by comparing simulated and observed PGV at individual stations,and evaluate inter-model consistency by analyzing the spatial distribution of PGV across different models.The tested models include:SWChinaCVM-1.0/2.0,USTClitho1.0/2.0,CSES_VM1.0,ChinaM-S1.0,ShallowVs,and two 1D models with and without topography.Results show that the adopted fault and 3D velocity models can accurately reproduce PGV up to 0.3 Hz,with increasing errors observed at higher frequencies.Averaging simulation results from multiple models yields lower overall errors and reduces systematic biases introduced by a single model,thereby enhancing the reliability of ground motion prediction.Among the tested models,the SWChinaCVM series,USTClitho series,and CSES_VM1.0 showed similar spatial distributions of PGV and also produced results that closely match observed PGV at individual stations.In contrast,the ShallowVs model tends to overestimate PGV,while the ChinaM-S1.0 model tends to underestimate it.This study offers practical guidance on velocity model selection for ground motion simulations in the Sichuan-Yunnan region and offers insights for further refinement of regional velocity structures.展开更多
Near-field ground motion amplification in sedimentary basins is widely observed and crucial to earthquake hazard assessment.However,the effects of basin topography coupled with the low-velocity layer(LVL)on ground mot...Near-field ground motion amplification in sedimentary basins is widely observed and crucial to earthquake hazard assessment.However,the effects of basin topography coupled with the low-velocity layer(LVL)on ground motion amplification are not fully understood.By constructing 3D basin models with surrounding mountain terrains and performing ground motion simulations,we compare the ground motion characteristics with different basin LVL depths and LVL velocities.The velocity contrast between the LVL and bedrock controls the amplification magnitude.The maximum amplification area in the model changes from the central part to the periphery part of the basin as the velocity contrast decreases and can be greatly influenced by the distance between the source and the basin.The amplification also spreads along the mountain edge circling the basin.Our work sheds light on the distribution of amplification within sedimentary basins surrounded by mountains,revealing that the velocity contrast between the LVL and bedrock plays a pivotal role in controlling the magnitude of amplification.展开更多
The Wenchuan earthquake of 12 May 2008 is the most destructive earthquake in China in the past 30 years in terms of property damage and human losses. In order to understand the earthquake process and the geo-morpholog...The Wenchuan earthquake of 12 May 2008 is the most destructive earthquake in China in the past 30 years in terms of property damage and human losses. In order to understand the earthquake process and the geo-morphological factors affecting the seismic hazard, we simulated the strong ground mo-tion caused by the earthquake, incorporating three-dimensional (3D) earth structure, finite-fault rupture, and realistic surface topography. The simulated ground motions reveal that the fault rupture and basin structure control the overall pattern of the peak ground shaking. Large peak ground velocity (PGV) is distributed in two narrow areas: one with the largest PGV values is above the hanging wall of the fault and attributed to the locations of fault asperities and rupture directivity; the other is along the north-western margin of the Sichuan Basin and caused by both the directivity of fault rupture and the ampli-fication in the thick sediment basin. Rough topography above the rupture fault causes wave scattering, resulting in significantly larger peak ground motion on the apex of topographic relief than in the valley. Topography and scattering also reduce the wave energy in the forward direction of fault rupture but increase the PGV in other parts of the basin. These results suggest the need for a localized hazard as-sessment in places of rough topography that takes the topographic effects into account. Finally, had the earthquake started at the northeast end of the fault zone and ruptured to the southwest, Chengdu would have suffered a much stronger shaking than it experienced on 12 May, 2008.展开更多
Based on presumed active fault and corresponding model, this paper predicted the near-fault ground motion filed of a scenario earthquake （Mw=6 3/4 ） in an active fault by the explicit finite element method in combin...Based on presumed active fault and corresponding model, this paper predicted the near-fault ground motion filed of a scenario earthquake （Mw=6 3/4 ） in an active fault by the explicit finite element method in combination with the source time function with improved transmitting artificial boundary and with high-frequency vibration contained. The results indicate that the improved artificial boundary is stable in numerical computation and the predicted strong ground motion has a consistent characteristic with the observed motion.展开更多
Near-fault strong ground motion of strike-slip and dip-slip of vertical and inclined rectangular fault in half-space and layered half-space is analyzed by dislocation source model. The Fourier spectra ratio of ground ...Near-fault strong ground motion of strike-slip and dip-slip of vertical and inclined rectangular fault in half-space and layered half-space is analyzed by dislocation source model. The Fourier spectra ratio of ground motion is adopted to study the characteristics of near-fault ground motion. For both slip models, near-fault strong ground motion with high amplitude is located in a narrow belt area along the projection of the fault on the ground and mainly controlled by the sub-faults nearby. Directivity of strike-slip fault is more dominant in long period for components perpendicular to the fault, and more dominant in long period for components parallel to the fault for dip-slip fault. The deeper the location of the source is, the more slowly the amplitude of ground motion attenuates. There is obvious hanging wall effect in ground motion of inclined fault, and the spatial distribution of ground motion is asymmetric which coincides with observational data. Finally, a fitting function of spatial distribution for near-fault ground motion is proposed and compared with near source factors of the 1997 Uniform Building Code of USA.展开更多
How to select the adequate real strong earthquake ground motion for seismic analysis and design of structures is an essential problem in earthquake engineering research and practice. In the paper the concept of the se...How to select the adequate real strong earthquake ground motion for seismic analysis and design of structures is an essential problem in earthquake engineering research and practice. In the paper the concept of the severest design ground motion is proposed and a method is developed for comparing the severity of the recorded strong ground motions. By using this method the severest earthquake ground motions are selected out as seismic inputs to the structures to be designed from a database that consists of more than five thousand significant strong ground motion records collected over the world. The selected severest ground motions are very likely to be able to drive the structures to their critical response and thereby result in the highest damage potential. It is noted that for different structures with different predominant natural periods and at different sites where structures are located the severest design ground motions are usually different. Finally, two examples are illustrated to demonstrate the rationality of the concept and the reliability of the selected design motion.展开更多
Near-fault strong ground motion of strike-slip and dip-slip of vertical and inclined rectangular fault in half-space and layered half-space is analyzed by dislocation source model. The Fourier spectra ratio of ground ...Near-fault strong ground motion of strike-slip and dip-slip of vertical and inclined rectangular fault in half-space and layered half-space is analyzed by dislocation source model. The Fourier spectra ratio of ground motion is adopted to study the characteristics of near-fault ground motion. For both slip models, near-fault strong ground motion with high amplitude is located in a narrow belt area along the projection of the fault on the ground and mainly controlled by the sub-faults nearby. Directivity of strike-slip fault is more dominant in long period for components perpendicular to the fault, and more dominant in long period for components parallel to the fault for dip-slip fault. The deeper the location of the source is, the more slowly the amplitude of ground motion attenuates. There is obvious hanging wall effect in ground motion of inclined fault, and the spatial distribution of ground motion is asymmetric which coincides with observational data. Finally, a fitting function of spatial distribution for near-fault ground motion is proposed and compared with near source factors of the 1997 Uniform Building Code of USA.展开更多
Four recently developed attenuation models are calibrated by using a very limited amount of strong motion data recorded in China.The research shows that the attenuation characteristics of the earthquake shaking in nor...Four recently developed attenuation models are calibrated by using a very limited amount of strong motion data recorded in China.The research shows that the attenuation characteristics of the earthquake shaking in northern China are similar to those in the western US.The supporting evidence includes Q factors,preliminary results of kappa values,stress drop, shear wave velocity profile in the shallow earth crust,areas enclosed by the isoseismals of Modified Mercalli Intensity V.From these comparison,s of different attenuation models,it is recommended that the Crouse and McGuire spectral attenuation model could possibly be used for northern China.展开更多
Strong ground motions caused by earthquakes with magnitudes ranging from 3.5 to 6.9 and hypocentral distances of up to 300km were recorded by local broadband stations and three-component accelerograms within Georgia’...Strong ground motions caused by earthquakes with magnitudes ranging from 3.5 to 6.9 and hypocentral distances of up to 300km were recorded by local broadband stations and three-component accelerograms within Georgia’s enhanced digital seismic network.Such data mixing is particularly effective in areas where strong ground motion data are lacking.The data were used to produce models based on ground-motion prediction equations(GMPEs),one benefit of which is that they take into consideration information from waveforms across a wide range of frequencies.In this study,models were developed to predict ground motions for peak ground acceleration and 5%-damped pseudo-absolute-acceleration spectra for periods between 0.01 and 10 s.Short-period ground motions decayed faster than long-period motions,though decay was still in the order of approximately 1/r.Faulting mechanisms and local soil conditions greatly influence GMPEs.The spectral acceleration(SA)of thrust faults was higher than that for either strike-slip or normal faults but the influence of strike-slip faulting on SA was slightly greater than that for normal faults.Soft soils also caused significantly more amplification than rocky sites.展开更多
基金Earthquake Science Foundation under Contract No.201009
文摘A random synthesis procedure based on finite fault model is adopted for near field strong ground motion simulation in this paper. The fault plane of the source is divided into a number of sub-sources, the whole moment magnitude is also divided into more sub-events. The Fourier spectrum of ground motion caused by a sub-event in given sub-source, then can be derived by means of taking the point source spectrum, attenuation with distance, energy dissipation, and near surface effect, into account. A time history is synthesized from this amplitude spectrum and a random phase spectrum, and being combined with an envelope function. The ground motion is worked out by superposition of all time histories from each sub-event in each sub-source, with time lags determining by the differences between the triggering times of sub-events and distances of the sub-sources. From the example of simulations at 21 near field points in a scenario earthquake with 4 dip angles of the fault plane, it is illustrated that the procedure can describe the rupture directivity and hanging wall effect very well. To validate the procedure, the response spectra and time histories recorded at three near fault stations MCN, LV3 and PCD during the Northridge earthquake in 1994, are compared with the simulated ones.
基金IIT Roorkee under the Faculty Initiation Grant No.100556
文摘With the recent development of digital Micro Electro Mechanical System （MEMS） sensors, the cost of monitoring and detecting seismic events in real time can be greatly reduced. Ability of MEMS accelerograph to record a seismic event depends upon the efficiency of triggering algorithm, apart from the sensor＇s sensitivity. There are several classic triggering algorithms developed to detect seismic events, ranging from basic amplitude threshold to more sophisticated pattern recognition. Algorithms based on STA/LTA are reported to be computationally efficient for real time monitoring. In this paper, we analyzed several STA/LTA algorithms to check their efficiency and suitability using data obtained from the Quake Catcher Network （network of MEMS accelerometer stations）. We found that most of the STA/LTA algorithms are suitable for use with MEMS accelerometer data to accurately detect seismic events. However, the efficiency of any particular algorithm is found to be dependent on the parameter set used （i.e., window width of STA, LTA and threshold level）.
基金supported by the National Natural Science Foundation of China (40674016)Earthquake Research Fund of Ministry of Science and Technology of China ((2007)203/8-53)
文摘Taking Tianjin as an example, this paper proposed a methodology and process for evaluating near-fault strong ground motions from future earthquakes to mitigate earthquake damage for the metropolitan area and important engineering structures. The result of strong ground motion was predicted for Tianjin main faults by the hybrid method which mainly con- sists of 3D finite difference method and stochastic Green＇s function. Simulation is performed for 3D structures of Tianjin re- gion and characterized asperity models. The characterized asperity model describing source heterogeneity is introduced fol- lowing the fault information from the project of Tianjin Active Faults and Seismic Hazard Assessment. We simulated the worst case that two earthquakes separately occur. The results indicate that the fault position, rupture process and the sedi- mentary deposits of the basin significantly affect amplification of the simulated ground motion. Our results also demonstrate the possibility of practical simulating wave propagation including basin induced surface waves in broad frequency-band, for seismic hazard analysis near the fault from future earthquakes in urbanized areas.
基金supported by MOST of China under Grant No. 2006BAC13B02CEA under Grant No. 200808026 IEM/CEA under Grant No. 0618001
文摘In this paper, the mobile strong ground motion observation for the destructive earthquake is introduced. Considering the characteristics and its spatial distributions of aftershock, 59 strong ground motion instruments were installed along the Longrnenshan fault area, and more than 2 000 records have been accumulated. It shows that it is necessary to perform the mobile strong ground motion observation after the destructive earthquake, and the precious collected data could be applied for further research.
文摘The notion of equivalent dispersion of strong seismic waves is further illuminated and a frequency-dependentstochastic model of the Fourier phase of strong earthquake ground motion is presented for use in statistical estimates of the Fourier phase. The non-stationary features of design ground motions synthesized using the phasemodel in combination with the empirical attenuation model of amplitude spectra of strong ground motion are ableto be consistent with those of observed records in the sense of statistics.
基金China Postdoctoral Science Foundation UnderGrant No. 2005037650 Heilongjiang Province PostdoctoralScience Foundation China EarthquakeAdministration’s Tenth"Five Year Plans" Project
文摘A method to predict near-field strong ground motions for scenario earthquakes on active faults is proposed. First, macro-source parameters characterizing the entire source area, i.e., global source parameters, including fault length, fault width, rupture area, average slip on the fault plane, etc., are estimated by seismogeology survey, seismicity and seismic scaling laws. Second, slip distributions characterizing heterogeneity or roughness on the fault plane, i.e., local source parameters, are reproduced/evaluated by the hybrid slip model. Finally, the finite fault source model, developed from both the global and local source parameters, is combined with the stochastically synthetic technique of ground motion using the dynamic comer frequency based on seismology. The proposed method is applied to simulate the acceleration time histories on three base-rock stations during the 1994 Northridge earthquake. Comparisons between the predicted and recorded acceleration time histories show that the method is feasible and practicable.
文摘On the assumption that seismic source is simplified as linear rupture fault with finite length, this paper qualitatively studies the seismic source effects on space correlation of strong ground motion. Based on expanding expression of Fourier spectrum of strong ground motion with space coordinate variables, this paper also gives a expression of describing correlation of strong ground motion field. According to far-field condition, the theoretical formula of the expression can be obtained. Furthermore, this paper presents a theoretical formula of estimation the radius of strong ground motion field, which depends on expansion condition of Fourier spectrum of strong ground motion, with space variables. At last, taking one earthquake as an example, this paper gives three-dimension patterns of radius of the field with epicenter distance and azimuth as well as frequency.
基金Urban Active Fault Detection Project sponsored by the National Development andReform Commission of China(2004-1138)National Natural Science Foundation of China(40604005)+1 种基金Joint Seismological Science Foundation of China(A07027)Key Project during the 10th Five-year Plan Period from Earthquake Administration of China(J105B-16).
文摘Seismic hazard assessment based on urban active faults can provide scientific bases for city planning and project construction, while numerical simulation of strong ground motion is an important method for seismic hazard prediction and assessment. A 3-D physical model in conformity with real strata configuration of （mainly） the Quaternary is a prerequisite to ensure the reliability of the simulation results. In this paper, we give a detailed account of the technical scheme and process for creating a 3-D physical model in Kunming basin. The data used are synthe- sized from seismogeological data, borehole data, topographic data, digital elevation mode （DEM） data, seismic exploration results and wave velocity measurements. Strafigraphic division is based mainly on shear wave velocity, with strata sequence taken into consideration. The model construction is finally accomplished with ArcGIS and many relevant programming techniques via layer-by-layer stacking （in depth direction） of the adjacent medium interfaces （meshes）. Meanwhile, a database of 3-D physical models is set up, which provides model data and parameters for strong ground motion simulation. Some processing methods and significant issues are also addressed in the paper in accordance with different types of exploration and experimental data.
基金This project was sponsored by the National Development and Reform Commission,PRC(20041138)
文摘On the basis of previous study of the 1679 Sanhe-Pinggu(M8.0) earthquake,the biggest event in history ever recorded in Beijing and its adjacent area,we made a 3-D strong ground motion simulation utilizing the staggered-grid finite differences method to study the distributions of peak ground velocity with different earthquake source models in the Beijing region.In the paper,earthquake source models and a transmission medium velocity model are established and the corresponding parameters are given in accordance to the results from a related previous study.Then,using a three-dimensional finite difference computing program of near-fault strong ground motion developed by Graves,the peak ground velocity caused by a destructive earthquake in the Beijing area is simulated.In our computation model,the earthquake source is 3km in depth,and a total number of 21,679 observation points on the ground surface are figured out.The transmission medium velocity model is composed of four stratums which are the Quaternary deposit,the upper crust,the upper part of the middle crust and the lower part of the middle crust.With the minimum grid spacing of 0.15km,a total of 2.28×106 grids are generated.Using a time step of 0.02 seconds we calculated the peak ground velocity for a duration of 8 seconds.After the analysis of the simulation results,we observed some basic characteristics of near-fault strong ground motion such as the concentration effect of near-fault peak ground velocity,rupture directivity effect,hanging wall effect,and basin effect.The results from our simulation and analysis suggest that the source and transmitting medium parameters in our model are suitable and the finite difference method is applicable to estimate the distribution of strong ground motion in the study region.
基金supported by National Natural Science Foundation of China (41304046)
文摘Joint inversion of teleseismic body-wave data and strong ground motion waveforms was applied to determine the rupture process of the 2010 Mentawai earthquake. To obtain stable solutions, smoothing and non-negative constraints were introduced. A total of 33 teleseismic stations and 5 strong ground motion stations supplied data. The teleseismic and strong ground motion data were separately windowed for 150 s and 250 s and bandpass filtered with frequencies of 0.001e1.0 Hz and 0.005e0.5 Hz, respectively. The finitefault model was established with length and width of 190 km and 70 km, and the initial seismic source parameters were set by referring to centroid moment tensor(CMT) solutions. Joint inversion results indicate that the focal mechanism of this earthquake is thrust fault type, and the strike, dip, and rake angles are generally in accordance with CMT results. The seismic moment was determined as 5.814 1020Nm(Mw7.8) and source duration was about 102 s, which is greater than those of other earthquakes of similar magnitude. The rupture nucleated near the hypocenter and then propagated along the strike direction to the northwest, with a maximum slip of 3.9 m. Large uncertainties regarding the amount of slip retrieved using different inversion methods still exist; however, the conclusion that the majority of slip occurred far from the islands at very shallow depths was found to be robust. The 2010 Mentawai earthquake was categorized as a tsunami earthquake because of the long rupture duration and the generation of a tsunami much larger than was expected for an earthquake of its magnitude.
基金supported by the National Key R&D Program of China(Grant No.2023YFC3007304)the Guangdong Science and Technology Programme(Grant No.2023A1111120028)the Guangdong Provincial Pearl River Talents Program(Grant No.2019QN01G801)。
文摘The Sichuan-Yunnan region,at the southeastern edge of the Tibetan Plateau,exhibits highly complex crustal structures and frequent seismicity driven by the ongoing collision between the Indian and Eurasian plates.Physics-based simulations of strong ground motion are critical for reliable seismic hazard assessment in this tectonically active region.In recent years,multiple 3D velocity models have been developed for the Sichuan-Yunnan region using various datasets and methods.However,systematic studies evaluating how different velocity models affect strong ground motion simulation results are still scarce.In this study,we simulate strong ground motion for the M_(w)6.6 Luding earthquake that occurred on September 5,2022,using a finite-fault rupture model derived from observational data and a suite of different velocity models.We assess the reliability of each velocity model by comparing simulated and observed PGV at individual stations,and evaluate inter-model consistency by analyzing the spatial distribution of PGV across different models.The tested models include:SWChinaCVM-1.0/2.0,USTClitho1.0/2.0,CSES_VM1.0,ChinaM-S1.0,ShallowVs,and two 1D models with and without topography.Results show that the adopted fault and 3D velocity models can accurately reproduce PGV up to 0.3 Hz,with increasing errors observed at higher frequencies.Averaging simulation results from multiple models yields lower overall errors and reduces systematic biases introduced by a single model,thereby enhancing the reliability of ground motion prediction.Among the tested models,the SWChinaCVM series,USTClitho series,and CSES_VM1.0 showed similar spatial distributions of PGV and also produced results that closely match observed PGV at individual stations.In contrast,the ShallowVs model tends to overestimate PGV,while the ChinaM-S1.0 model tends to underestimate it.This study offers practical guidance on velocity model selection for ground motion simulations in the Sichuan-Yunnan region and offers insights for further refinement of regional velocity structures.
基金supported by the University of Science and Technology of China(USTC)Research Funds of the Double First-Class Initiative(YD2080002009)the National Natural Science Foundation of China(42074049 and 41974042)the Youth Innovation Promotion Association of the Chinese Academy of Sciences(2023471).
文摘Near-field ground motion amplification in sedimentary basins is widely observed and crucial to earthquake hazard assessment.However,the effects of basin topography coupled with the low-velocity layer(LVL)on ground motion amplification are not fully understood.By constructing 3D basin models with surrounding mountain terrains and performing ground motion simulations,we compare the ground motion characteristics with different basin LVL depths and LVL velocities.The velocity contrast between the LVL and bedrock controls the amplification magnitude.The maximum amplification area in the model changes from the central part to the periphery part of the basin as the velocity contrast decreases and can be greatly influenced by the distance between the source and the basin.The amplification also spreads along the mountain edge circling the basin.Our work sheds light on the distribution of amplification within sedimentary basins surrounded by mountains,revealing that the velocity contrast between the LVL and bedrock plays a pivotal role in controlling the magnitude of amplification.
基金the U.S. National Science Foundation (Grant Nos. EAR 0738779 and OCE 0727919)the National Basic Research Program of China (Grant No. 2004CB418404)partially by the National Nature Science Foundation of China (Grant No. 40521002)
文摘The Wenchuan earthquake of 12 May 2008 is the most destructive earthquake in China in the past 30 years in terms of property damage and human losses. In order to understand the earthquake process and the geo-morphological factors affecting the seismic hazard, we simulated the strong ground mo-tion caused by the earthquake, incorporating three-dimensional (3D) earth structure, finite-fault rupture, and realistic surface topography. The simulated ground motions reveal that the fault rupture and basin structure control the overall pattern of the peak ground shaking. Large peak ground velocity (PGV) is distributed in two narrow areas: one with the largest PGV values is above the hanging wall of the fault and attributed to the locations of fault asperities and rupture directivity; the other is along the north-western margin of the Sichuan Basin and caused by both the directivity of fault rupture and the ampli-fication in the thick sediment basin. Rough topography above the rupture fault causes wave scattering, resulting in significantly larger peak ground motion on the apex of topographic relief than in the valley. Topography and scattering also reduce the wave energy in the forward direction of fault rupture but increase the PGV in other parts of the basin. These results suggest the need for a localized hazard as-sessment in places of rough topography that takes the topographic effects into account. Finally, had the earthquake started at the northeast end of the fault zone and ruptured to the southwest, Chengdu would have suffered a much stronger shaking than it experienced on 12 May, 2008.
基金Heilongjiang Province Postdoctoral Science Foundation and China Earthquake Administration’s Tenth Five-year Plan Project
文摘Based on presumed active fault and corresponding model, this paper predicted the near-fault ground motion filed of a scenario earthquake （Mw=6 3/4 ） in an active fault by the explicit finite element method in combination with the source time function with improved transmitting artificial boundary and with high-frequency vibration contained. The results indicate that the improved artificial boundary is stable in numerical computation and the predicted strong ground motion has a consistent characteristic with the observed motion.
基金National Natural Science Foundation of China (59895410) Commonweal Foundation of the Ministry of Science and Technology of China (2001DIB20098).
文摘Near-fault strong ground motion of strike-slip and dip-slip of vertical and inclined rectangular fault in half-space and layered half-space is analyzed by dislocation source model. The Fourier spectra ratio of ground motion is adopted to study the characteristics of near-fault ground motion. For both slip models, near-fault strong ground motion with high amplitude is located in a narrow belt area along the projection of the fault on the ground and mainly controlled by the sub-faults nearby. Directivity of strike-slip fault is more dominant in long period for components perpendicular to the fault, and more dominant in long period for components parallel to the fault for dip-slip fault. The deeper the location of the source is, the more slowly the amplitude of ground motion attenuates. There is obvious hanging wall effect in ground motion of inclined fault, and the spatial distribution of ground motion is asymmetric which coincides with observational data. Finally, a fitting function of spatial distribution for near-fault ground motion is proposed and compared with near source factors of the 1997 Uniform Building Code of USA.
基金National Natural Science Foundation of China (59895410)Natural Science Foundation of Heilongjiang Province (E0228) Joint Seismological Foundation of China (95-07-444).
文摘How to select the adequate real strong earthquake ground motion for seismic analysis and design of structures is an essential problem in earthquake engineering research and practice. In the paper the concept of the severest design ground motion is proposed and a method is developed for comparing the severity of the recorded strong ground motions. By using this method the severest earthquake ground motions are selected out as seismic inputs to the structures to be designed from a database that consists of more than five thousand significant strong ground motion records collected over the world. The selected severest ground motions are very likely to be able to drive the structures to their critical response and thereby result in the highest damage potential. It is noted that for different structures with different predominant natural periods and at different sites where structures are located the severest design ground motions are usually different. Finally, two examples are illustrated to demonstrate the rationality of the concept and the reliability of the selected design motion.
基金National Natural Science Foundation of China (59895410), Commonweal Foundation of the Ministry of Science and Technology of China (2001DIB20098).
文摘Near-fault strong ground motion of strike-slip and dip-slip of vertical and inclined rectangular fault in half-space and layered half-space is analyzed by dislocation source model. The Fourier spectra ratio of ground motion is adopted to study the characteristics of near-fault ground motion. For both slip models, near-fault strong ground motion with high amplitude is located in a narrow belt area along the projection of the fault on the ground and mainly controlled by the sub-faults nearby. Directivity of strike-slip fault is more dominant in long period for components perpendicular to the fault, and more dominant in long period for components parallel to the fault for dip-slip fault. The deeper the location of the source is, the more slowly the amplitude of ground motion attenuates. There is obvious hanging wall effect in ground motion of inclined fault, and the spatial distribution of ground motion is asymmetric which coincides with observational data. Finally, a fitting function of spatial distribution for near-fault ground motion is proposed and compared with near source factors of the 1997 Uniform Building Code of USA.
基金The Hong Kong Polytechnic University,and partly supported by NSFC (Grant No.59678048)
文摘Four recently developed attenuation models are calibrated by using a very limited amount of strong motion data recorded in China.The research shows that the attenuation characteristics of the earthquake shaking in northern China are similar to those in the western US.The supporting evidence includes Q factors,preliminary results of kappa values,stress drop, shear wave velocity profile in the shallow earth crust,areas enclosed by the isoseismals of Modified Mercalli Intensity V.From these comparison,s of different attenuation models,it is recommended that the Crouse and McGuire spectral attenuation model could possibly be used for northern China.
基金supported by the Shota Rustaveli National Science Foundation of Georgia(SRNSFG)(No.FR-19-3657)。
文摘Strong ground motions caused by earthquakes with magnitudes ranging from 3.5 to 6.9 and hypocentral distances of up to 300km were recorded by local broadband stations and three-component accelerograms within Georgia’s enhanced digital seismic network.Such data mixing is particularly effective in areas where strong ground motion data are lacking.The data were used to produce models based on ground-motion prediction equations(GMPEs),one benefit of which is that they take into consideration information from waveforms across a wide range of frequencies.In this study,models were developed to predict ground motions for peak ground acceleration and 5%-damped pseudo-absolute-acceleration spectra for periods between 0.01 and 10 s.Short-period ground motions decayed faster than long-period motions,though decay was still in the order of approximately 1/r.Faulting mechanisms and local soil conditions greatly influence GMPEs.The spectral acceleration(SA)of thrust faults was higher than that for either strike-slip or normal faults but the influence of strike-slip faulting on SA was slightly greater than that for normal faults.Soft soils also caused significantly more amplification than rocky sites.
