To obtain the design parameters of the structure made by ecological high ductility cementitious composites(Eco-HDCC),the effects of curing age on the compressive and tensile stress-strain relationships were studied.Th...To obtain the design parameters of the structure made by ecological high ductility cementitious composites(Eco-HDCC),the effects of curing age on the compressive and tensile stress-strain relationships were studied.The reaction degree of fly ash,non-evaporable water content and the pH value in pore solution were calculated to reveal the mechanical property.The results indicate that as the curing age increases,the peak compressive strength,peak compressive strain and ultimate tensile strength of Eco-HDCC increase.However,the ultimate compressive strain and ultimate tensile strain of Eco-HDCC decrease with the increase in curing age.Besides,as the curing age increases,the reaction degree of fly ash and non-evaporable water content in Eco-HDCC increase,while the pH value in the pore solution of Eco-HDCC decreases.Finally,the simplified compressive and tensile stress-strain constitutive relationship models of Eco-HDCC with a curing age of 28 d were suggested for the structure design safety.展开更多
The stress-strain behavior of confined concrete under heating and residual conditions has been preliminarily addressed in previous research;however,its behavior at subsequent cooling temperatures after being heated to...The stress-strain behavior of confined concrete under heating and residual conditions has been preliminarily addressed in previous research;however,its behavior at subsequent cooling temperatures after being heated to peak temperature has yet to be thoroughly investigated.It is crucial for determining confined concrete structures’post-fire performance and burnout resistance.The paper presents the fundamental behavior of the confined concrete constitutive parameters and stress-strain curve at subsequent cooling temperatures after being heated to peak temperature.The study includes the stress-stress relationship of a 200 mm diameter cylinder with two distinct confinement spacings of 60 mm and 120 mm.The constitutive parameters for confined concrete were initially determined for a peak heating temperature of 750℃ and then modified to establish the stress-strain relationship for successive cooling temperatures of 500℃,250℃,and ambient temperature.The study results show that confinement has a considerable impact on compressive strength,stiffness,and ductility at ambient and fire conditions.After being heated to peak temperature,the confined concrete compressive strength recovers during successive cooling temperatures,with the recovery dependent on confinement spacing.The established stress-strain relationship can assist in better comprehending structural performance and capacity degradation for different tie spacings,and is useful for the analysis and design of confined RC(reinforced concrete)elements during and after a fire.展开更多
As a critical mechanical characteristic of rock,brittleness significantly influences fracture modes and damage evolution processes.Accurate quantitative evaluation of brittleness is essential for ensuring the stabilit...As a critical mechanical characteristic of rock,brittleness significantly influences fracture modes and damage evolution processes.Accurate quantitative evaluation of brittleness is essential for ensuring the stability of various engineering applications.Based on the pre-peak and post-peak stages of the rock stress-strain curve,this study constructed a brittleness index BI^(*).The index quantifies the ability of rock to resist plastic deformation during the pre-peak crack growth stage and evaluates the intensity of strength drop during the post-peak softening stage.Another index,BII,was established based on the degree of pre-peak elastic energy accumulation and the instability characteristics of post-peak dissipated energy.This index reflects the essential properties of rock failure by revealing the energy evolution mechanism.Furthermore,by defining a damage variable from the energy dissipation over the entire deformation process,an index B_(D)was introduced to evaluate brittleness from the perspective of internal damage development.Triaxial compression and cyclic loading tests were conducted on rocks of different lithologies to evaluate the new index.The influences of confining pressure and lithology on rock brittleness were analyzed,along with the sensitivity analysis of various brittleness index parameters.The results indicated that the proposed brittleness indices accurately distinguish the brittleness differences among various lithologies and show effective consistency with the failure modes of specimens under different confining pressures.Meanwhile,different brittleness indices were affected by confining pressure and lithology to different degrees.The post-peak softening stage of rock played a particularly significant role in brittleness analysis.A brittleness classification system under different confining pressures and lithologies was established.The research results contribute to the enhancement and refinement of the rock brittleness evaluation system.展开更多
The mechanical behavior of plastic concrete used in the cut-off walls of earth dams has been studied. Triaxial compression tests on the specimens in various ages and mix designs under different confining pressures hav...The mechanical behavior of plastic concrete used in the cut-off walls of earth dams has been studied. Triaxial compression tests on the specimens in various ages and mix designs under different confining pressures have been done and the stress-strain behavior of such materials and their strength parameter changes have been experimentally investigated. It has been observed that increasing the confining pressures applied on the specimens causes the material behavior to be alike the more ductile materials and the compressive strength increases considerably as well. Moreover, a parametric study has been carded out to investigate the influence of essential parameters on the shear strength parameters of these materials. According to the research, increasing the coarse to fine aggregates ratio leads to the increase of compressive strength of the specimens as well as the increase of the cohesion and internal friction angle of the materials. Furthermore, the bentonite content decrease and the cement factor increase result in an increase of the cohesion parameter of plastic concretes and decrease of the internal friction angle of such materials.展开更多
Tracheal stents are an important form of treatment for benign or malignant central airway obstruction.However,the mechanical behavior of current tracheal stents is significantly different from that of the native trach...Tracheal stents are an important form of treatment for benign or malignant central airway obstruction.However,the mechanical behavior of current tracheal stents is significantly different from that of the native trachea,which leads to a variety of serious complications.In this study,inspired by the structure of the native trachea,a wavy non-uniform ligament chiral tracheal stent is proposed,in which J-shaped stress-strain behavior and negative Poisson's ratio response are achieved by replacing the tangential ligament of tetrachiral and anti-tetrachiral hybrid structure with a wavy non-uniform ligament.Through the combination of theoretical analysis,finite element analysis and experimental tests,a wide range of desired J-shaped stress-strain curves are explored to mimic the native porcine trachea by tailoring the stent geometry.Besides,the negative Poisson’s ratio and auxetic diameter curves versus axial strain of the stent are also studied in detail,thus contributing to the enhancement of cross-section ventilation and reducing the migration of the stent.This novel tracheal stent with a unique microstructure shows a potential to perfectly match the physiological activities of the native trachea and thereby reduce potential complications.展开更多
Tensile stress-strain curves of five metallic alloys,i.e.,SKH51,STS316L,Ti-6Al-4V,Al6061and Inconel600were analyzed to investigate the working hardening behavior.The constitutive parameters of three constitutive equat...Tensile stress-strain curves of five metallic alloys,i.e.,SKH51,STS316L,Ti-6Al-4V,Al6061and Inconel600were analyzed to investigate the working hardening behavior.The constitutive parameters of three constitutive equations,i.e.,the Hollomon,Swift and Voce equations,were compared by using different methods.A new working hardening parameter was proposed to characterize the working hardening behavior in different deformation stages.It is found that Voce equation is suitable to describe stress-strain curves in large strain region.Meanwhile,the predicting accuracy of ultimate tensile strength by Voce equation is the best.The working hardening behavior of SKH51is different from the other four metallic alloys.展开更多
In this paper the relationship between microstructure and stress-strain behavior in tensile test of high strength pipeline steel was investigated.The steel with polygonal ferrite-bainite(PF+B)microstructure has a"...In this paper the relationship between microstructure and stress-strain behavior in tensile test of high strength pipeline steel was investigated.The steel with polygonal ferrite-bainite(PF+B)microstructure has a"round-house"type tensile stress-strain curve with low Y/T ratio,highly uniform elongation and high n-value,which means PF+B microstructure has the best deformability(i.e.Ideal stress-strain behavior)among the four microstructures.The steel with acicular ferrite-martensite&austenite(AF+MA)microstructure has a"continuous-yielding"type tensile stress-strain curve,whose deformability is worse than that of PF+B microstructure.Both the steels of polygonal ferrite-acicular ferrite(PF+AF)and polygonal ferrite-pearlite(PF+P)microstructure have"luders elongation"type tensile stress-strain curve with high Y/T ratio,low uniform elongation and low n-value,which means PF+AF and PF+P microstructures have the worst deformability among the four microstructures.展开更多
To completely understand the rate-dependent stress-strain behavior of the porous nanocrystalline materials,it is necessary to formulate a constitutive model that can reflect the complicated experimentally observed str...To completely understand the rate-dependent stress-strain behavior of the porous nanocrystalline materials,it is necessary to formulate a constitutive model that can reflect the complicated experimentally observed stress-strain relations of nanocrystalline materials.The nanocrystalline materials consisting grain interior and grain boundary are considered as viscoplastic and porous materials for the reasons that their mechanical deformation is commonly governed by both dislocation glide and diffusion,and pores commonly exist in the nanocrystalline materials.A constitutive law of the unified theory reflecting the stress-strain relations was established and verified by experimental data of bulk nanocrystalline Ni prepared by hydrogen direct current arc plasma evaporation method and hot compression.The effect of the evolution of porosity on stress-strain relations was taken into account to make that the predicted results can keep good agreements with the corresponding experimental results.展开更多
Behavior recognition of Hu sheep contributes to their intensive and intelligent farming.Due to the generally high density of Hu sheep farming,severe occlusion occurs among different behaviors and even among sheep perf...Behavior recognition of Hu sheep contributes to their intensive and intelligent farming.Due to the generally high density of Hu sheep farming,severe occlusion occurs among different behaviors and even among sheep performing the same behavior,leading to missing and false detection issues in existing behavior recognition methods.A high-low frequency aggregated attention and negative sample comprehensive score loss and comprehensive score soft non-maximum suppression-YOLO(HLNC-YOLO)was proposed for identifying the behavior of Hu sheep,addressing the issues of missed and erroneous detections caused by occlusion between Hu sheep in intensive farming.Firstly,images of four typical behaviors-standing,lying,eating,and drinking-were collected from the sheep farm to construct the Hu sheep behavior dataset(HSBD).Next,to solve the occlusion issues,during the training phase,the C2F-HLAtt module was integrated,which combined high-low frequency aggregation attention,into the YOLO v8 Backbone to perceive occluded objects and introduce an auxiliary reversible branch to retain more effective features.Using comprehensive score regression loss(CSLoss)to reduce the scores of suboptimal boxes and enhance the comprehensive scores of occluded object boxes.Finally,the soft comprehensive score non-maximal suppression(Soft-CS-NMS)algorithm filtered prediction boxes during the inferencing.Testing on the HSBD,HLNC-YOLO achieved a mean average precision(mAP@50)of 87.8%,with a memory footprint of 17.4 MB.This represented an improvement of 7.1,2.2,4.6,and 11 percentage points over YOLO v8,YOLO v9,YOLO v10,and Faster R-CNN,respectively.Research indicated that the HLNC-YOLO accurately identified the behavior of Hu sheep in intensive farming and possessed generalization capabilities,providing technical support for smart farming.展开更多
To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator a...To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.展开更多
Correction to:Nano-Micro Letters(2026)18:10.https://doi.org/10.1007/s40820-025-01852-8 Following publication of the original article[1],the authors reported that the last author’s name was inadvertently misspelled.Th...Correction to:Nano-Micro Letters(2026)18:10.https://doi.org/10.1007/s40820-025-01852-8 Following publication of the original article[1],the authors reported that the last author’s name was inadvertently misspelled.The published version showed“Hongzhen Chen”,whereas the correct spelling should be“Hongzheng Chen”.The correct author name has been provided in this Correction,and the original article[1]has been corrected.展开更多
Residential energy-use behavior and energy-saving awareness play a crucial role in sustainable urban energy planning and building energy efficiency,particularly under the pressures of climate change.However,existing s...Residential energy-use behavior and energy-saving awareness play a crucial role in sustainable urban energy planning and building energy efficiency,particularly under the pressures of climate change.However,existing studies often lack comparative analysis of urban-rural differences and tend to focus excessively on behavior patterns while neglecting the dimension of energysaving awareness.With China’s urbanization rate reaching 66.16%,understanding such regional disparities has become increasingly important.To address these research gaps,this study conducts a large-scale survey on space cooling behaviors among residents in Beijing,a representative Chinese megacity.It should be noted that living standards in such megacities are generally higher than the national average,which may shape distinctive energy-use profiles.Analyzing 1573valid samples(1064 urban/442 rural)in 2024,this study employed K-Prototypes and K-Modes clustering to identify typical cooling behavior and energy-saving awareness pattems,followed by Kendall/Chi-square correlation tests and XGBoost importance analysis to determine key influencing factors,with subsequent urban-rural comparative analysis.Results indicate that urban residents are primarily heat-sensitive or heat-tolerant,with a secondary patten of mid-low temperature preference,and generally exhibit long cooling durations;rural behavior is dominated by heat-tolerant type,followed by heat-sensitive,mid-low temperature preference,and never-on types as secondary patterns;both urban and rural areas exhibit energy-savingawareness characterized by low consumption-lowwillingness,though urban areas show marginally higher motivation;energy-saving awareness correlates with cooling behavior in rural areas,but this relationship weakens significantly in urban contexts.展开更多
With the rapid development of smart manufacturing,intelligent safety monitoring in industrial workshops has become increasingly important.To address the challenges of complex backgrounds,target scale variation,and exc...With the rapid development of smart manufacturing,intelligent safety monitoring in industrial workshops has become increasingly important.To address the challenges of complex backgrounds,target scale variation,and excessive model parameters in worker violation detection,this study proposes ADCP-YOLO,an enhanced lightweight model based on YOLOv8.Here,“ADCP”represents four key improvements:Alterable Kernel Convolution(AKConv),Dilated-Wise Residual(DWR)module,Channel Reconstruction Global Attention Mechanism(CRGAM),and Powerful-IoU loss.These components collaboratively enhance feature extraction,multi-scale perception,and localization accuracy while effectively reducing model complexity and computational cost.Experimental results show that ADCP-YOLO achieves a mAP of 90.6%,surpassing YOLOv8 by 3.0%with a 6.6%reduction in parameters.These findings demonstrate that ADCP-YOLO successfully balances accuracy and efficiency,offering a practical solution for intelligent safety monitoring in smart factory workshops.展开更多
This study utilizes wet/dry cyclic corrosion testing combined with corrosion big data technology to investigate the mechanism by which chloride ions(Cl^(-))influence the corrosion behavior of 650 MPa high-strength low...This study utilizes wet/dry cyclic corrosion testing combined with corrosion big data technology to investigate the mechanism by which chloride ions(Cl^(-))influence the corrosion behavior of 650 MPa high-strength low-alloy(HSLA)steel in industrially polluted environments.The corrosion process of 650 MPa HSLA steel occurred in two distinct stages:an initial corrosion stage and a stable corrosion stage.During the initial phase,the weight loss rate increased rapidly owing to the instability of the rust layer.Notably,this study demonstrated that 650 MPa HSLA steel exhibited superior corrosion resistance in Cl-containing environments.The formation of a corrosion-product film eventually reduced the weight-loss rate.However,the intrusion of Cl^(-)at increasing concentrations gradually destabilized theα/γ^(*)phases of the rust layer,leading to a looser structure and lower polarization resistance(R_(p)).The application of corrosion big data technology in this study facilitated the validation and analysis of the experimental results,offering new insights into the corrosion mechanisms of HSLA steel in chloride-rich environments.展开更多
Flight behavior analysis provides the fundamental basis for the future development of air traffic management(ATM).The characteristics of aircraft behavior are inherently reflected in their flight trajectories,impactin...Flight behavior analysis provides the fundamental basis for the future development of air traffic management(ATM).The characteristics of aircraft behavior are inherently reflected in their flight trajectories,impacting flight efficiency and safety levels.However,existing research largely addresses inefficient or abnormal trajectories from a single perspective,with an absence of a unified evaluation standard.This paper introduces a method for analyzing flight deviation behavior based on automatic dependent surveillance-broadcast(ADS-B)data,defining novel metrics of trajectory redundancy and trajectory deviation.An adaptive detection algorithm is developed to capture diverse deviation patterns.Results reveal that higher trajectory redundancy is linked to lower operational efficiency,while trajectory deviation effectively identify stepped descents,holding patterns,detours,and other behaviors.The approach offers data-driven support for anomaly detection,performance evaluation and air traffic management,with substantial significance for civil aviation applications.展开更多
Urbanization destroys wildlife habitats,fragmenting them into small patches with poor connectivity,leading to population declines in species sensitive to such chan ges.Escape is the most common anti-predator strategy ...Urbanization destroys wildlife habitats,fragmenting them into small patches with poor connectivity,leading to population declines in species sensitive to such chan ges.Escape is the most common anti-predator strategy adopted by birds,refuges in habitats reduce or eliminate predation risk.Therefore,creating habitats with suitable refuges for birds has significant implications for their conservation.However,there have been few studies on refuge selection in birds.This study examined the Eurasian Tree Sparrow(Passer montanus)and Oriental Magpie(Pica serica)in urban and rural areas of Chengde City,northern China by measuring their alert distance(AD),flight initiation distance(FID),an d distance fled(DF)and analyzed their refuge selection characteristics after escaping.The FID/AD ratio was employed to assess the behavioral differences of birds in the risk trade-off.The results showed that the FID and FID/AD of both species were lower in urban areas than in rural areas and were negatively correlated with immediate human density.Sparrow FID was significantly affected by group size and landing substrate type.The FID of sparrows was positively correlated with the group size.The sparrows that fled to bushes escaped earlier.In urban and rural areas,sparrows exhibited significantly lower FID,DF,and FID/AD than magpies.The species adopted different refuge selection strategies,with magpies preferentially selecting trees with greater vertical height and sparrows selecting both trees and bushes.Further analysis indicated that the horizontal and vertical distances fled of both species were lower when fleeing to bushes.Urban planning and conservation areas construction should incorporate the ecological needs of local bird species to rationally configure their habitat structure,thereby optimizing the effect of avian conservation.展开更多
High-performance magnesium alloys are in great demand to meet the lightweight design requirements of aircraft.Grain size has long been recognized as a key factor influencing the mechanical properties of alloys.This st...High-performance magnesium alloys are in great demand to meet the lightweight design requirements of aircraft.Grain size has long been recognized as a key factor influencing the mechanical properties of alloys.This study investigates the effect of grain size,controlled by Zr addition,on the fatigue behavior of a recently developed low-cost Mg-2.6Nd-0.35Zn alloy,through systematic characterization and analysis of stress-life(S-N)curves,fatigue crack propagation,fracture surface morphology,stress intensity factor,and crack propagation threshold.The results show that after heat treatment(solution at 525±5℃ for 8 h and water quenching at 60-80℃,followed by aging at 250±5℃for 14 h and then air cooling),coarse-grained specimens(average grain size approximately 596μm)containing 0.12wt.%Zr exhibit greater resistance to fatigue crack propagation than fine-grained specimens(average grain size approximately 94μm)containing 0.46wt.%Zr.Coarse grains promote intergranular fracture,while fine grains favor transgranular fracture.In addition,coarse grains reduce the sensitivity of the crack tip to stress concentration.Furthermore,fine-grained samples demonstrate a longer total fatigue life,owing to their superior resistance to crack initiation,which significantly prolongs the crack initiation stage.These findings highlight the importance of optimizing grain size to achieve the best possible fatigue resistance in Mg-Nd-Zn-Zr alloys for practical engineering applications.展开更多
BACKGROUND Despite societal guidelines recommending targeted screening for Barrett’s esophagus(BE)and esophageal adenocarcinoma(EAC)in individuals with gastroesophageal reflux symptoms(GERS),screening adherence is su...BACKGROUND Despite societal guidelines recommending targeted screening for Barrett’s esophagus(BE)and esophageal adenocarcinoma(EAC)in individuals with gastroesophageal reflux symptoms(GERS),screening adherence is suboptimal.Current screening approaches fail to identify individuals not seeking medical consultation for GERS or whose GERS are managed with‘over-the-counter’(OTC)acid suppressant therapies.AIM To assess patients’self-management and help-seeking behavior for GERS.METHODS This cross-sectional study collected data from the Dutch general population aged 18-75 years between January and April 2023 using a web-based survey.The survey included questions regarding self-management(e.g.,use of acid suppressant therapy with or without prescription)and help-seeking behavior(e.g.,consulting a primary care provider)for GERS.Simple random sampling was performed to select individuals within the target age group.In total,18156 randomly selected individuals were invited to participate.The study protocol was registered in ClinicalTrials.gov(identifier:NCT05689918).RESULTS Of the 18156 invited individuals,3214 participants(17.7%)completed the survey,of which 1572 participants(48.9%)reported GERS.Of these,904 participants(57.5%)had never consulted a primary care provider for these symptoms,of which 331 participants(36.6%)reported taking OTC acid suppressant therapy in the past six months and 100 participants(11.1%)fulfilled the screening criteria for BE and EAC according to the European Society of Gastrointestinal Endoscopy Guideline.CONCLUSION The population fulfilling the screening criteria for BE and EAC is incompletely identified,suggesting potential underutilization of medical consultation.Raising public awareness of GERS as a risk factor for EAC is needed.展开更多
There is a strong coupling relationship between the friction characteristics of the ball-groove interface and the ball motion behavior.However,available studies tend to consider ball motion and frictional behavior sep...There is a strong coupling relationship between the friction characteristics of the ball-groove interface and the ball motion behavior.However,available studies tend to consider ball motion and frictional behavior separately.In this paper,a unified tribology-kinematic model is established considering the coupling effect between friction and the ball velocity vector.The friction in ball-groove contact and ball speed are simultaneously measured by a newly developed disc-ball-disc device for studying friction and movement in ball screws.A comprehensive analysis of rubbing interface behavior and ball motion is conducted.The results show that the coupling effect between friction in ball-groove contact and ball motion is quite obvious.The sliding velocity of the ball is much higher with coupling effect than that when ignoring coupling influence,especially at high-speed conditions.The friction in ball-groove contact decreases at first and then shows a dramatic increase with the gradual rise of rotation speed,which is caused by the coupling variation of sliding speed.The studies show that the disc-ball-disc approach is an innovative and valuable method to investigate friction and ball motion in ball screws.展开更多
Turbine blades,due to their intricate geometry,are exposed to multiaxial stresses during operation.Consequently,it is imperative to examine the anisotropy of their stress-rupture behavior across various testing scenar...Turbine blades,due to their intricate geometry,are exposed to multiaxial stresses during operation.Consequently,it is imperative to examine the anisotropy of their stress-rupture behavior across various testing scenarios,particularly under high-temperature conditions.Stress-rupture behavior of a Ni-based single crystal superalloy was investigated under a load varying from 100 MPa to 137 MPa at 1,100℃ for both[001]-and[111]-orientated specimens.Results demonstrate that the rupture behavior of[111]-orientated specimens exhibits obviously higher sensitive to applied stress compared to[001]-orientated specimens.This difference is primarily attributed to the orientation dependentγ'coarsening behavior and distinct dislocation interactions atγ/γ'interfaces.In[001]-oriented specimens,plate-likeγ/γ'rafts rapidly form alongside well-developed interfacial dislocation networks,where theγ/γ'misfit stress dominates the microstructural evolution.In contrast,the[111]-orientated specimens exhibit retained,coarsenedγ'precipitates embedded within theγmatrix,accompanied by poorly developed interfacial dislocation networks.展开更多
基金The National Natural Science Foundations of China(No.51778133)the Transportation Science&Technology Project of Fujian Province(No.2017Y057)+1 种基金the China Railway Project(No.2017G007-C)Foundation of the China Scholarship Council(No.201906090163).
文摘To obtain the design parameters of the structure made by ecological high ductility cementitious composites(Eco-HDCC),the effects of curing age on the compressive and tensile stress-strain relationships were studied.The reaction degree of fly ash,non-evaporable water content and the pH value in pore solution were calculated to reveal the mechanical property.The results indicate that as the curing age increases,the peak compressive strength,peak compressive strain and ultimate tensile strength of Eco-HDCC increase.However,the ultimate compressive strain and ultimate tensile strain of Eco-HDCC decrease with the increase in curing age.Besides,as the curing age increases,the reaction degree of fly ash and non-evaporable water content in Eco-HDCC increase,while the pH value in the pore solution of Eco-HDCC decreases.Finally,the simplified compressive and tensile stress-strain constitutive relationship models of Eco-HDCC with a curing age of 28 d were suggested for the structure design safety.
文摘The stress-strain behavior of confined concrete under heating and residual conditions has been preliminarily addressed in previous research;however,its behavior at subsequent cooling temperatures after being heated to peak temperature has yet to be thoroughly investigated.It is crucial for determining confined concrete structures’post-fire performance and burnout resistance.The paper presents the fundamental behavior of the confined concrete constitutive parameters and stress-strain curve at subsequent cooling temperatures after being heated to peak temperature.The study includes the stress-stress relationship of a 200 mm diameter cylinder with two distinct confinement spacings of 60 mm and 120 mm.The constitutive parameters for confined concrete were initially determined for a peak heating temperature of 750℃ and then modified to establish the stress-strain relationship for successive cooling temperatures of 500℃,250℃,and ambient temperature.The study results show that confinement has a considerable impact on compressive strength,stiffness,and ductility at ambient and fire conditions.After being heated to peak temperature,the confined concrete compressive strength recovers during successive cooling temperatures,with the recovery dependent on confinement spacing.The established stress-strain relationship can assist in better comprehending structural performance and capacity degradation for different tie spacings,and is useful for the analysis and design of confined RC(reinforced concrete)elements during and after a fire.
基金support from the National Natural Science Foundation of China(Grant Nos.12072102 and 12102129).
文摘As a critical mechanical characteristic of rock,brittleness significantly influences fracture modes and damage evolution processes.Accurate quantitative evaluation of brittleness is essential for ensuring the stability of various engineering applications.Based on the pre-peak and post-peak stages of the rock stress-strain curve,this study constructed a brittleness index BI^(*).The index quantifies the ability of rock to resist plastic deformation during the pre-peak crack growth stage and evaluates the intensity of strength drop during the post-peak softening stage.Another index,BII,was established based on the degree of pre-peak elastic energy accumulation and the instability characteristics of post-peak dissipated energy.This index reflects the essential properties of rock failure by revealing the energy evolution mechanism.Furthermore,by defining a damage variable from the energy dissipation over the entire deformation process,an index B_(D)was introduced to evaluate brittleness from the perspective of internal damage development.Triaxial compression and cyclic loading tests were conducted on rocks of different lithologies to evaluate the new index.The influences of confining pressure and lithology on rock brittleness were analyzed,along with the sensitivity analysis of various brittleness index parameters.The results indicated that the proposed brittleness indices accurately distinguish the brittleness differences among various lithologies and show effective consistency with the failure modes of specimens under different confining pressures.Meanwhile,different brittleness indices were affected by confining pressure and lithology to different degrees.The post-peak softening stage of rock played a particularly significant role in brittleness analysis.A brittleness classification system under different confining pressures and lithologies was established.The research results contribute to the enhancement and refinement of the rock brittleness evaluation system.
文摘The mechanical behavior of plastic concrete used in the cut-off walls of earth dams has been studied. Triaxial compression tests on the specimens in various ages and mix designs under different confining pressures have been done and the stress-strain behavior of such materials and their strength parameter changes have been experimentally investigated. It has been observed that increasing the confining pressures applied on the specimens causes the material behavior to be alike the more ductile materials and the compressive strength increases considerably as well. Moreover, a parametric study has been carded out to investigate the influence of essential parameters on the shear strength parameters of these materials. According to the research, increasing the coarse to fine aggregates ratio leads to the increase of compressive strength of the specimens as well as the increase of the cohesion and internal friction angle of the materials. Furthermore, the bentonite content decrease and the cement factor increase result in an increase of the cohesion parameter of plastic concretes and decrease of the internal friction angle of such materials.
基金supported by the National Key Research and Development Program of China(No.2020YFC1107103)the National Natural Science Foundation of China(No.51821093)the Research Project of Public Welfare Technology Application of Zhejiang Province,China(No.LGF21H010006).
文摘Tracheal stents are an important form of treatment for benign or malignant central airway obstruction.However,the mechanical behavior of current tracheal stents is significantly different from that of the native trachea,which leads to a variety of serious complications.In this study,inspired by the structure of the native trachea,a wavy non-uniform ligament chiral tracheal stent is proposed,in which J-shaped stress-strain behavior and negative Poisson's ratio response are achieved by replacing the tangential ligament of tetrachiral and anti-tetrachiral hybrid structure with a wavy non-uniform ligament.Through the combination of theoretical analysis,finite element analysis and experimental tests,a wide range of desired J-shaped stress-strain curves are explored to mimic the native porcine trachea by tailoring the stent geometry.Besides,the negative Poisson’s ratio and auxetic diameter curves versus axial strain of the stent are also studied in detail,thus contributing to the enhancement of cross-section ventilation and reducing the migration of the stent.This novel tracheal stent with a unique microstructure shows a potential to perfectly match the physiological activities of the native trachea and thereby reduce potential complications.
基金Project(51275414)supported by the National Natural Science Foundation of ChinaProject(3102015BJ(Ⅱ)ZS007)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(130-QP-2015)supported by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),China
文摘Tensile stress-strain curves of five metallic alloys,i.e.,SKH51,STS316L,Ti-6Al-4V,Al6061and Inconel600were analyzed to investigate the working hardening behavior.The constitutive parameters of three constitutive equations,i.e.,the Hollomon,Swift and Voce equations,were compared by using different methods.A new working hardening parameter was proposed to characterize the working hardening behavior in different deformation stages.It is found that Voce equation is suitable to describe stress-strain curves in large strain region.Meanwhile,the predicting accuracy of ultimate tensile strength by Voce equation is the best.The working hardening behavior of SKH51is different from the other four metallic alloys.
文摘In this paper the relationship between microstructure and stress-strain behavior in tensile test of high strength pipeline steel was investigated.The steel with polygonal ferrite-bainite(PF+B)microstructure has a"round-house"type tensile stress-strain curve with low Y/T ratio,highly uniform elongation and high n-value,which means PF+B microstructure has the best deformability(i.e.Ideal stress-strain behavior)among the four microstructures.The steel with acicular ferrite-martensite&austenite(AF+MA)microstructure has a"continuous-yielding"type tensile stress-strain curve,whose deformability is worse than that of PF+B microstructure.Both the steels of polygonal ferrite-acicular ferrite(PF+AF)and polygonal ferrite-pearlite(PF+P)microstructure have"luders elongation"type tensile stress-strain curve with high Y/T ratio,low uniform elongation and low n-value,which means PF+AF and PF+P microstructures have the worst deformability among the four microstructures.
基金Project(10502025) supported by the National Natural Science Foundation of ChinaProject(101005) supported by the Fok Ying Tong Education FoundationProject(BK2007528) supported by the Natural Science Foundation of Jiangsu Province,China
文摘To completely understand the rate-dependent stress-strain behavior of the porous nanocrystalline materials,it is necessary to formulate a constitutive model that can reflect the complicated experimentally observed stress-strain relations of nanocrystalline materials.The nanocrystalline materials consisting grain interior and grain boundary are considered as viscoplastic and porous materials for the reasons that their mechanical deformation is commonly governed by both dislocation glide and diffusion,and pores commonly exist in the nanocrystalline materials.A constitutive law of the unified theory reflecting the stress-strain relations was established and verified by experimental data of bulk nanocrystalline Ni prepared by hydrogen direct current arc plasma evaporation method and hot compression.The effect of the evolution of porosity on stress-strain relations was taken into account to make that the predicted results can keep good agreements with the corresponding experimental results.
文摘Behavior recognition of Hu sheep contributes to their intensive and intelligent farming.Due to the generally high density of Hu sheep farming,severe occlusion occurs among different behaviors and even among sheep performing the same behavior,leading to missing and false detection issues in existing behavior recognition methods.A high-low frequency aggregated attention and negative sample comprehensive score loss and comprehensive score soft non-maximum suppression-YOLO(HLNC-YOLO)was proposed for identifying the behavior of Hu sheep,addressing the issues of missed and erroneous detections caused by occlusion between Hu sheep in intensive farming.Firstly,images of four typical behaviors-standing,lying,eating,and drinking-were collected from the sheep farm to construct the Hu sheep behavior dataset(HSBD).Next,to solve the occlusion issues,during the training phase,the C2F-HLAtt module was integrated,which combined high-low frequency aggregation attention,into the YOLO v8 Backbone to perceive occluded objects and introduce an auxiliary reversible branch to retain more effective features.Using comprehensive score regression loss(CSLoss)to reduce the scores of suboptimal boxes and enhance the comprehensive scores of occluded object boxes.Finally,the soft comprehensive score non-maximal suppression(Soft-CS-NMS)algorithm filtered prediction boxes during the inferencing.Testing on the HSBD,HLNC-YOLO achieved a mean average precision(mAP@50)of 87.8%,with a memory footprint of 17.4 MB.This represented an improvement of 7.1,2.2,4.6,and 11 percentage points over YOLO v8,YOLO v9,YOLO v10,and Faster R-CNN,respectively.Research indicated that the HLNC-YOLO accurately identified the behavior of Hu sheep in intensive farming and possessed generalization capabilities,providing technical support for smart farming.
文摘To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.
文摘Correction to:Nano-Micro Letters(2026)18:10.https://doi.org/10.1007/s40820-025-01852-8 Following publication of the original article[1],the authors reported that the last author’s name was inadvertently misspelled.The published version showed“Hongzhen Chen”,whereas the correct spelling should be“Hongzheng Chen”.The correct author name has been provided in this Correction,and the original article[1]has been corrected.
文摘Residential energy-use behavior and energy-saving awareness play a crucial role in sustainable urban energy planning and building energy efficiency,particularly under the pressures of climate change.However,existing studies often lack comparative analysis of urban-rural differences and tend to focus excessively on behavior patterns while neglecting the dimension of energysaving awareness.With China’s urbanization rate reaching 66.16%,understanding such regional disparities has become increasingly important.To address these research gaps,this study conducts a large-scale survey on space cooling behaviors among residents in Beijing,a representative Chinese megacity.It should be noted that living standards in such megacities are generally higher than the national average,which may shape distinctive energy-use profiles.Analyzing 1573valid samples(1064 urban/442 rural)in 2024,this study employed K-Prototypes and K-Modes clustering to identify typical cooling behavior and energy-saving awareness pattems,followed by Kendall/Chi-square correlation tests and XGBoost importance analysis to determine key influencing factors,with subsequent urban-rural comparative analysis.Results indicate that urban residents are primarily heat-sensitive or heat-tolerant,with a secondary patten of mid-low temperature preference,and generally exhibit long cooling durations;rural behavior is dominated by heat-tolerant type,followed by heat-sensitive,mid-low temperature preference,and never-on types as secondary patterns;both urban and rural areas exhibit energy-savingawareness characterized by low consumption-lowwillingness,though urban areas show marginally higher motivation;energy-saving awareness correlates with cooling behavior in rural areas,but this relationship weakens significantly in urban contexts.
基金TheNationalNatural Science Foundation ofChina(Nos.62272418,62102058)Zhejiang Provincial Natural Science Foundation Major Project(No.LD24F020004)the Major Open Project of Key Laboratory for Advanced Design and Intelligent Computing of the Ministry of Education(No.ADIC2023ZD001).
文摘With the rapid development of smart manufacturing,intelligent safety monitoring in industrial workshops has become increasingly important.To address the challenges of complex backgrounds,target scale variation,and excessive model parameters in worker violation detection,this study proposes ADCP-YOLO,an enhanced lightweight model based on YOLOv8.Here,“ADCP”represents four key improvements:Alterable Kernel Convolution(AKConv),Dilated-Wise Residual(DWR)module,Channel Reconstruction Global Attention Mechanism(CRGAM),and Powerful-IoU loss.These components collaboratively enhance feature extraction,multi-scale perception,and localization accuracy while effectively reducing model complexity and computational cost.Experimental results show that ADCP-YOLO achieves a mAP of 90.6%,surpassing YOLOv8 by 3.0%with a 6.6%reduction in parameters.These findings demonstrate that ADCP-YOLO successfully balances accuracy and efficiency,offering a practical solution for intelligent safety monitoring in smart factory workshops.
基金financially supported by the National Natural Science Foundation of China(Nos.52104319 and 52374323)。
文摘This study utilizes wet/dry cyclic corrosion testing combined with corrosion big data technology to investigate the mechanism by which chloride ions(Cl^(-))influence the corrosion behavior of 650 MPa high-strength low-alloy(HSLA)steel in industrially polluted environments.The corrosion process of 650 MPa HSLA steel occurred in two distinct stages:an initial corrosion stage and a stable corrosion stage.During the initial phase,the weight loss rate increased rapidly owing to the instability of the rust layer.Notably,this study demonstrated that 650 MPa HSLA steel exhibited superior corrosion resistance in Cl-containing environments.The formation of a corrosion-product film eventually reduced the weight-loss rate.However,the intrusion of Cl^(-)at increasing concentrations gradually destabilized theα/γ^(*)phases of the rust layer,leading to a looser structure and lower polarization resistance(R_(p)).The application of corrosion big data technology in this study facilitated the validation and analysis of the experimental results,offering new insights into the corrosion mechanisms of HSLA steel in chloride-rich environments.
基金supported in part by the National Key Research and Development Program of China(No.2023YFB4302903)the Fundamental Research Funds for the Central Universities(No.210525001464)。
文摘Flight behavior analysis provides the fundamental basis for the future development of air traffic management(ATM).The characteristics of aircraft behavior are inherently reflected in their flight trajectories,impacting flight efficiency and safety levels.However,existing research largely addresses inefficient or abnormal trajectories from a single perspective,with an absence of a unified evaluation standard.This paper introduces a method for analyzing flight deviation behavior based on automatic dependent surveillance-broadcast(ADS-B)data,defining novel metrics of trajectory redundancy and trajectory deviation.An adaptive detection algorithm is developed to capture diverse deviation patterns.Results reveal that higher trajectory redundancy is linked to lower operational efficiency,while trajectory deviation effectively identify stepped descents,holding patterns,detours,and other behaviors.The approach offers data-driven support for anomaly detection,performance evaluation and air traffic management,with substantial significance for civil aviation applications.
基金funded by the Natural Science Foundation of Hebei Province(C2025201032 to J.W.)High-Level Talents Research Start-Up Project of Hebei University(521100222044 to J.W.)+1 种基金the Huizhi Lead Innovation Space Project in High-tech Zone of Chengde City(HZLC202410 to L.M.)National Undergraduate Innovation and Entrepreneurship Training Program(202510098011 to H.Z.)。
文摘Urbanization destroys wildlife habitats,fragmenting them into small patches with poor connectivity,leading to population declines in species sensitive to such chan ges.Escape is the most common anti-predator strategy adopted by birds,refuges in habitats reduce or eliminate predation risk.Therefore,creating habitats with suitable refuges for birds has significant implications for their conservation.However,there have been few studies on refuge selection in birds.This study examined the Eurasian Tree Sparrow(Passer montanus)and Oriental Magpie(Pica serica)in urban and rural areas of Chengde City,northern China by measuring their alert distance(AD),flight initiation distance(FID),an d distance fled(DF)and analyzed their refuge selection characteristics after escaping.The FID/AD ratio was employed to assess the behavioral differences of birds in the risk trade-off.The results showed that the FID and FID/AD of both species were lower in urban areas than in rural areas and were negatively correlated with immediate human density.Sparrow FID was significantly affected by group size and landing substrate type.The FID of sparrows was positively correlated with the group size.The sparrows that fled to bushes escaped earlier.In urban and rural areas,sparrows exhibited significantly lower FID,DF,and FID/AD than magpies.The species adopted different refuge selection strategies,with magpies preferentially selecting trees with greater vertical height and sparrows selecting both trees and bushes.Further analysis indicated that the horizontal and vertical distances fled of both species were lower when fleeing to bushes.Urban planning and conservation areas construction should incorporate the ecological needs of local bird species to rationally configure their habitat structure,thereby optimizing the effect of avian conservation.
文摘High-performance magnesium alloys are in great demand to meet the lightweight design requirements of aircraft.Grain size has long been recognized as a key factor influencing the mechanical properties of alloys.This study investigates the effect of grain size,controlled by Zr addition,on the fatigue behavior of a recently developed low-cost Mg-2.6Nd-0.35Zn alloy,through systematic characterization and analysis of stress-life(S-N)curves,fatigue crack propagation,fracture surface morphology,stress intensity factor,and crack propagation threshold.The results show that after heat treatment(solution at 525±5℃ for 8 h and water quenching at 60-80℃,followed by aging at 250±5℃for 14 h and then air cooling),coarse-grained specimens(average grain size approximately 596μm)containing 0.12wt.%Zr exhibit greater resistance to fatigue crack propagation than fine-grained specimens(average grain size approximately 94μm)containing 0.46wt.%Zr.Coarse grains promote intergranular fracture,while fine grains favor transgranular fracture.In addition,coarse grains reduce the sensitivity of the crack tip to stress concentration.Furthermore,fine-grained samples demonstrate a longer total fatigue life,owing to their superior resistance to crack initiation,which significantly prolongs the crack initiation stage.These findings highlight the importance of optimizing grain size to achieve the best possible fatigue resistance in Mg-Nd-Zn-Zr alloys for practical engineering applications.
文摘BACKGROUND Despite societal guidelines recommending targeted screening for Barrett’s esophagus(BE)and esophageal adenocarcinoma(EAC)in individuals with gastroesophageal reflux symptoms(GERS),screening adherence is suboptimal.Current screening approaches fail to identify individuals not seeking medical consultation for GERS or whose GERS are managed with‘over-the-counter’(OTC)acid suppressant therapies.AIM To assess patients’self-management and help-seeking behavior for GERS.METHODS This cross-sectional study collected data from the Dutch general population aged 18-75 years between January and April 2023 using a web-based survey.The survey included questions regarding self-management(e.g.,use of acid suppressant therapy with or without prescription)and help-seeking behavior(e.g.,consulting a primary care provider)for GERS.Simple random sampling was performed to select individuals within the target age group.In total,18156 randomly selected individuals were invited to participate.The study protocol was registered in ClinicalTrials.gov(identifier:NCT05689918).RESULTS Of the 18156 invited individuals,3214 participants(17.7%)completed the survey,of which 1572 participants(48.9%)reported GERS.Of these,904 participants(57.5%)had never consulted a primary care provider for these symptoms,of which 331 participants(36.6%)reported taking OTC acid suppressant therapy in the past six months and 100 participants(11.1%)fulfilled the screening criteria for BE and EAC according to the European Society of Gastrointestinal Endoscopy Guideline.CONCLUSION The population fulfilling the screening criteria for BE and EAC is incompletely identified,suggesting potential underutilization of medical consultation.Raising public awareness of GERS as a risk factor for EAC is needed.
基金Supported by National Natural Science Foundation of China(Grant No.52275206).
文摘There is a strong coupling relationship between the friction characteristics of the ball-groove interface and the ball motion behavior.However,available studies tend to consider ball motion and frictional behavior separately.In this paper,a unified tribology-kinematic model is established considering the coupling effect between friction and the ball velocity vector.The friction in ball-groove contact and ball speed are simultaneously measured by a newly developed disc-ball-disc device for studying friction and movement in ball screws.A comprehensive analysis of rubbing interface behavior and ball motion is conducted.The results show that the coupling effect between friction in ball-groove contact and ball motion is quite obvious.The sliding velocity of the ball is much higher with coupling effect than that when ignoring coupling influence,especially at high-speed conditions.The friction in ball-groove contact decreases at first and then shows a dramatic increase with the gradual rise of rotation speed,which is caused by the coupling variation of sliding speed.The studies show that the disc-ball-disc approach is an innovative and valuable method to investigate friction and ball motion in ball screws.
基金financially supported by the National Science and Technology Major Project of China(No.2019-VII-0019-0161 and No.2019-VII-0004-0144)the National Natural Science Foundation of China(No.92360302)the Shandong Provincial Natural Science Foundation of China(No.ZR2021QE103)。
文摘Turbine blades,due to their intricate geometry,are exposed to multiaxial stresses during operation.Consequently,it is imperative to examine the anisotropy of their stress-rupture behavior across various testing scenarios,particularly under high-temperature conditions.Stress-rupture behavior of a Ni-based single crystal superalloy was investigated under a load varying from 100 MPa to 137 MPa at 1,100℃ for both[001]-and[111]-orientated specimens.Results demonstrate that the rupture behavior of[111]-orientated specimens exhibits obviously higher sensitive to applied stress compared to[001]-orientated specimens.This difference is primarily attributed to the orientation dependentγ'coarsening behavior and distinct dislocation interactions atγ/γ'interfaces.In[001]-oriented specimens,plate-likeγ/γ'rafts rapidly form alongside well-developed interfacial dislocation networks,where theγ/γ'misfit stress dominates the microstructural evolution.In contrast,the[111]-orientated specimens exhibit retained,coarsenedγ'precipitates embedded within theγmatrix,accompanied by poorly developed interfacial dislocation networks.
