Outstanding mechanical properties of graphene nanoplatelets(GNPs)make them ideal reinforcement for mass production of composites.In this research,the composites were fabricated by stir-casting method.GNPs were added i...Outstanding mechanical properties of graphene nanoplatelets(GNPs)make them ideal reinforcement for mass production of composites.In this research,the composites were fabricated by stir-casting method.GNPs were added in 1.5 and 3.0 wt.%into Mg–3wt.%Al–1wt.%Zn(AZ31)magnesium alloy.As cast ingots were preheated for one hour and extruded at 350℃ with extrusion ratio of 5.2:1.As extruded AZ31-GNPs composites were micro-structurally characterized with X-ray diffraction,optical microscopy and scanning electron microscopy.Vickers microhardness of synthesized materials was investigated both in parallel and perpendicular to extrusion directions.Room temperature mechanical testing revealed that with increasing GNP’s content,tensile fracture strain was remarkably increased without significant compromise in tensile strength.Furthermore,as extruded AZ31-3GNPs composites were subjected to tensile testing at temperatures ranging from 75℃ to 300℃ with initial strain rate of 2×10^(−3)s^(−1) to evaluate high temperature formability of composite.It was found that like CNTs,GNPs also have the potential to sustain tensile strength at high temperatures.展开更多
A novel two step mixing method including injection of particles into the melt by inert gas and stirring was used to prepare aluminum matrix composites （AMCs） reinforced with Al2O3 particles. Different mass fractions...A novel two step mixing method including injection of particles into the melt by inert gas and stirring was used to prepare aluminum matrix composites （AMCs） reinforced with Al2O3 particles. Different mass fractions of micro alumina particles were injected into the melt under stirring speed of 300 r/min. Then the samples were extruded with ratios of 1.77 or 1.56. The microstructure observation showed that application of the injection and extrusion processes led to a uniform distribution of particles in the matrix. The density measurements showed that the porosity in the composites increased with increasing the mass fraction of Al2O3 and stirring speed and decreased by extrusion process. Hardness, yield and ultimate tensile strengths of the extruded composites increased with increasing the particle mass fraction to 7%, while for the composites without extrusion they increased with particle mass fraction to 5%.展开更多
The distribution of SiC particles in Al-SiC composite can greatly influence the mechanical performances of Al-SiC composite. To realize the homogeneous distribution of SiC particles in stir-casting Al-SiC composite, s...The distribution of SiC particles in Al-SiC composite can greatly influence the mechanical performances of Al-SiC composite. To realize the homogeneous distribution of SiC particles in stir-casting Al-SiC composite, semisolid stir casting of Al-4.25 vol.%SiC composite was conducted using a special electromagneticmechanical stirring equipment made by our team, in which there are three uniformly-distributed blades with a horizontal tilt angle of 25 ° to mechanically raise the SiC particles by creating an upward movement of slurry under electromagnetic stirring. The microstructure of the as-cast Al-SiC composites was observed by Scanning Electron Mcroscopy(SEM). The volume fraction of SiC particles was measured by image analysis using the Quantimet 520 Image Processing and Analysis System. The tensile strength of the Al-4.25 vol.%SiC composites was measured by tensile testing. Results show that the Al-4.25 vol.%SiC composites with the homogeneous distrbutin of SiC particles can be obtained by the electromagnetic-mechanical stirring casting with the speed of 300 and 600 r·min-1 at 620 °C. The differences between the volume fraction of Si C particles at the top of ingot and that at the bottom are both ~0.04 vol.% with the stirring speed of 300 and 600 r·min-1, which are so small that the distribution of SiC particles can be seen as the homogeneous. The tensile strength of the Al matrix is enhanced by 51.2% due to the uniformly distributed SiC particles. The porosity of the composite mainly results from the solidification shrinkage of slurry and it is less than 0.04 vol.%.展开更多
基金the National Natural Science Foundation of China(Projects 51531002,51474043,51571043)Fundamental Research Funds for the Central Universities(Grant 106112015CDJZR135515)Chongqing Municipal Government(CSTC2013JCYJC60001,CEC project,Two River Scholar Project andThe Chief Scientist Studio Project).
文摘Outstanding mechanical properties of graphene nanoplatelets(GNPs)make them ideal reinforcement for mass production of composites.In this research,the composites were fabricated by stir-casting method.GNPs were added in 1.5 and 3.0 wt.%into Mg–3wt.%Al–1wt.%Zn(AZ31)magnesium alloy.As cast ingots were preheated for one hour and extruded at 350℃ with extrusion ratio of 5.2:1.As extruded AZ31-GNPs composites were micro-structurally characterized with X-ray diffraction,optical microscopy and scanning electron microscopy.Vickers microhardness of synthesized materials was investigated both in parallel and perpendicular to extrusion directions.Room temperature mechanical testing revealed that with increasing GNP’s content,tensile fracture strain was remarkably increased without significant compromise in tensile strength.Furthermore,as extruded AZ31-3GNPs composites were subjected to tensile testing at temperatures ranging from 75℃ to 300℃ with initial strain rate of 2×10^(−3)s^(−1) to evaluate high temperature formability of composite.It was found that like CNTs,GNPs also have the potential to sustain tensile strength at high temperatures.
基金Research Deputy of Ferdowsi University of Mashhad for supporting this project
文摘A novel two step mixing method including injection of particles into the melt by inert gas and stirring was used to prepare aluminum matrix composites （AMCs） reinforced with Al2O3 particles. Different mass fractions of micro alumina particles were injected into the melt under stirring speed of 300 r/min. Then the samples were extruded with ratios of 1.77 or 1.56. The microstructure observation showed that application of the injection and extrusion processes led to a uniform distribution of particles in the matrix. The density measurements showed that the porosity in the composites increased with increasing the mass fraction of Al2O3 and stirring speed and decreased by extrusion process. Hardness, yield and ultimate tensile strengths of the extruded composites increased with increasing the particle mass fraction to 7%, while for the composites without extrusion they increased with particle mass fraction to 5%.
基金financially supported by the Beijing Natural Science Foundation(No.2162036)
文摘The distribution of SiC particles in Al-SiC composite can greatly influence the mechanical performances of Al-SiC composite. To realize the homogeneous distribution of SiC particles in stir-casting Al-SiC composite, semisolid stir casting of Al-4.25 vol.%SiC composite was conducted using a special electromagneticmechanical stirring equipment made by our team, in which there are three uniformly-distributed blades with a horizontal tilt angle of 25 ° to mechanically raise the SiC particles by creating an upward movement of slurry under electromagnetic stirring. The microstructure of the as-cast Al-SiC composites was observed by Scanning Electron Mcroscopy(SEM). The volume fraction of SiC particles was measured by image analysis using the Quantimet 520 Image Processing and Analysis System. The tensile strength of the Al-4.25 vol.%SiC composites was measured by tensile testing. Results show that the Al-4.25 vol.%SiC composites with the homogeneous distrbutin of SiC particles can be obtained by the electromagnetic-mechanical stirring casting with the speed of 300 and 600 r·min-1 at 620 °C. The differences between the volume fraction of Si C particles at the top of ingot and that at the bottom are both ~0.04 vol.% with the stirring speed of 300 and 600 r·min-1, which are so small that the distribution of SiC particles can be seen as the homogeneous. The tensile strength of the Al matrix is enhanced by 51.2% due to the uniformly distributed SiC particles. The porosity of the composite mainly results from the solidification shrinkage of slurry and it is less than 0.04 vol.%.
