Because of vehicle＇s external disturbances and model uncertainties,robust control algorithms have obtained popularity in vehicle stability control.The robust control usually gives up performance in order to guarantee...Because of vehicle＇s external disturbances and model uncertainties,robust control algorithms have obtained popularity in vehicle stability control.The robust control usually gives up performance in order to guarantee the robustness of the control algorithm,therefore an improved robust internal model control（IMC） algorithm blending model tracking and internal model control is put forward for active steering system in order to reach high performance of yaw rate tracking with certain robustness.The proposed algorithm inherits the good model tracking ability of the IMC control and guarantees robustness to model uncertainties.In order to separate the design process of model tracking from the robustness design process,the improved 2 degree of freedom（DOF） robust internal model controller structure is given from the standard Youla parameterization.Simulations of double lane change maneuver and those of crosswind disturbances are conducted for evaluating the robust control algorithm,on the basis of a nonlinear vehicle simulation model with a magic tyre model.Results show that the established 2-DOF robust IMC method has better model tracking ability and a guaranteed level of robustness and robust performance,which can enhance the vehicle stability and handling,regardless of variations of the vehicle model parameters and the external crosswind interferences.Contradiction between performance and robustness of active steering control algorithm is solved and higher control performance with certain robustness to model uncertainties is obtained.展开更多
Because of the tire nonlinearity and vehicle＇s parameters＇uncertainties,robust control methods based on the worst cases,such as H_∞,μsynthesis,have been widely used in active front steering control,however,in orde...Because of the tire nonlinearity and vehicle＇s parameters＇uncertainties,robust control methods based on the worst cases,such as H_∞,μsynthesis,have been widely used in active front steering control,however,in order to guarantee the stability of active front steering system（AFS）controller,the robust control is at the cost of performance so that the robust controller is a little conservative and has low performance for AFS control.In this paper,a generalized internal model robust control（GIMC）that can overcome the contradiction between performance and stability is used in the AFS control.In GIMC,the Youla parameterization is used in an improved way.And GIMC controller includes two sections：a high performance controller designed for the nominal vehicle model and a robust controller compensating the vehicle parameters＇uncertainties and some external disturbances.Simulations of double lane change（DLC）maneuver and that of braking on split-μroad are conducted to compare the performance and stability of the GIMC control,the nominal performance PID controller and the H_∞controller.Simulation results show that the high nominal performance PID controller will be unstable under some extreme situations because of large vehicle＇s parameters variations,H_∞controller is conservative so that the performance is a little low,and only the GIMC controller overcomes the contradiction between performance and robustness,which can both ensure the stability of the AFS controller and guarantee the high performance of the AFS controller.Therefore,the GIMC method proposed for AFS can overcome some disadvantages of control methods used by current AFS system,that is,can solve the instability of PID or LQP control methods and the low performance of the standard H_∞controller.展开更多
This work was focused on the model-based design method of two-axis four-actuator(TAFA) fast steering mirror system(FSM), in order to improve the design efficiency. The structure and operation principle commonality of ...This work was focused on the model-based design method of two-axis four-actuator(TAFA) fast steering mirror system(FSM), in order to improve the design efficiency. The structure and operation principle commonality of normal TAFA FSM were investigated. Based on the structure and the commonality, the conditions of single-axis idea, high-frequency resonance and coupling were modeled gradually. Combining these models, a holonomic system model was established to reflect and predict the performance of TAFA FSM. A model-based design method was proposed based on the holonomic system model. The design flow and design concept of the method were described. In accordance with the method, a TAFA FSM was designed. Simulations and experiments of the FSM were done, and the results of them were compared. The compared results indicate that the holonomic system model can well reflect and predict the performance of TAFA FSM. The bandwidth of TAFA FSM is more than 250 Hz; adjust time is less than 15 ms;overshoot is less than 8%; position accuracy is better than 10 μrad; the FSM prototype can satisfy the requirements.展开更多
A novel method is proposed to dynamically control the path following of a ground Ackerman steering robot to avoid a collision.The method consists of collision prediction module,collision avoidance module and global pa...A novel method is proposed to dynamically control the path following of a ground Ackerman steering robot to avoid a collision.The method consists of collision prediction module,collision avoidance module and global path following module.The elliptic repulsive potential field method（ER-PFM）and the enhanced vector polar histogram method（VPH＋）based on the Ackerman steering model are proposed to predict the collision in a dynamic environment.The collision avoidance is realized by the proposed cost function and speed control law.The global path following process is achieved by pure pursuit.Experiments show that the robot can fulfill the dynamic path following task safely and efficiently using the proposed method.展开更多
Facing the requirement of establishing a steering mechanical model for the wheel configuration design,selection of steering motors, dynamic analysis and simulation of the lunar rover, shear force beneaththe steering w...Facing the requirement of establishing a steering mechanical model for the wheel configuration design,selection of steering motors, dynamic analysis and simulation of the lunar rover, shear force beneaththe steering wheel, bulldozing resistance acting on steering wheel rims and side surfaces respectively areconducted on the basis of the wheel-loose soil interaction. The quantitative relation between steering resistancemoment (SRM) and steering radius, dimension of the wheel, soil parameters is established. Tovalidate the model, a single-wheel test bed is employed to test the steering performance of a wheel with0.15735m radius and 0.165m width when the steering radius is 0.00m, 0.04m, 0.08m, 0.12m and0.16m, respectively. The SRM is approached asymptotically with the increasing steering angle and almostproportional to the steering radius. The theoretical results of SRM are compact with the experimental results,which shows that the steering model can predict the experimental results well.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51375009)PhD Research Foundation of Liaocheng University,China(Grant No.318051523)Tsinghua University Initiative Scientific Research Program,China
文摘Because of vehicle＇s external disturbances and model uncertainties,robust control algorithms have obtained popularity in vehicle stability control.The robust control usually gives up performance in order to guarantee the robustness of the control algorithm,therefore an improved robust internal model control（IMC） algorithm blending model tracking and internal model control is put forward for active steering system in order to reach high performance of yaw rate tracking with certain robustness.The proposed algorithm inherits the good model tracking ability of the IMC control and guarantees robustness to model uncertainties.In order to separate the design process of model tracking from the robustness design process,the improved 2 degree of freedom（DOF） robust internal model controller structure is given from the standard Youla parameterization.Simulations of double lane change maneuver and those of crosswind disturbances are conducted for evaluating the robust control algorithm,on the basis of a nonlinear vehicle simulation model with a magic tyre model.Results show that the established 2-DOF robust IMC method has better model tracking ability and a guaranteed level of robustness and robust performance,which can enhance the vehicle stability and handling,regardless of variations of the vehicle model parameters and the external crosswind interferences.Contradiction between performance and robustness of active steering control algorithm is solved and higher control performance with certain robustness to model uncertainties is obtained.
基金Supported by National Natural Science Foundation of China(Grant Nos.11072106,51375009)
文摘Because of the tire nonlinearity and vehicle＇s parameters＇uncertainties,robust control methods based on the worst cases,such as H_∞,μsynthesis,have been widely used in active front steering control,however,in order to guarantee the stability of active front steering system（AFS）controller,the robust control is at the cost of performance so that the robust controller is a little conservative and has low performance for AFS control.In this paper,a generalized internal model robust control（GIMC）that can overcome the contradiction between performance and stability is used in the AFS control.In GIMC,the Youla parameterization is used in an improved way.And GIMC controller includes two sections：a high performance controller designed for the nominal vehicle model and a robust controller compensating the vehicle parameters＇uncertainties and some external disturbances.Simulations of double lane change（DLC）maneuver and that of braking on split-μroad are conducted to compare the performance and stability of the GIMC control,the nominal performance PID controller and the H_∞controller.Simulation results show that the high nominal performance PID controller will be unstable under some extreme situations because of large vehicle＇s parameters variations,H_∞controller is conservative so that the performance is a little low,and only the GIMC controller overcomes the contradiction between performance and robustness,which can both ensure the stability of the AFS controller and guarantee the high performance of the AFS controller.Therefore,the GIMC method proposed for AFS can overcome some disadvantages of control methods used by current AFS system,that is,can solve the instability of PID or LQP control methods and the low performance of the standard H_∞controller.
基金Projects(51135009)supported by the National Natural Science Foundation of China
文摘This work was focused on the model-based design method of two-axis four-actuator(TAFA) fast steering mirror system(FSM), in order to improve the design efficiency. The structure and operation principle commonality of normal TAFA FSM were investigated. Based on the structure and the commonality, the conditions of single-axis idea, high-frequency resonance and coupling were modeled gradually. Combining these models, a holonomic system model was established to reflect and predict the performance of TAFA FSM. A model-based design method was proposed based on the holonomic system model. The design flow and design concept of the method were described. In accordance with the method, a TAFA FSM was designed. Simulations and experiments of the FSM were done, and the results of them were compared. The compared results indicate that the holonomic system model can well reflect and predict the performance of TAFA FSM. The bandwidth of TAFA FSM is more than 250 Hz; adjust time is less than 15 ms;overshoot is less than 8%; position accuracy is better than 10 μrad; the FSM prototype can satisfy the requirements.
基金Supported by the National Natural Science Foundation of China(91420203)
文摘A novel method is proposed to dynamically control the path following of a ground Ackerman steering robot to avoid a collision.The method consists of collision prediction module,collision avoidance module and global path following module.The elliptic repulsive potential field method（ER-PFM）and the enhanced vector polar histogram method（VPH＋）based on the Ackerman steering model are proposed to predict the collision in a dynamic environment.The collision avoidance is realized by the proposed cost function and speed control law.The global path following process is achieved by pure pursuit.Experiments show that the robot can fulfill the dynamic path following task safely and efficiently using the proposed method.
基金Supported by the National High Technology Research and Development Program of China (No. 2006AA04Z231 )the Natural Science Foundation of Heilongjiang Province ( No. ZJG0709).
文摘Facing the requirement of establishing a steering mechanical model for the wheel configuration design,selection of steering motors, dynamic analysis and simulation of the lunar rover, shear force beneaththe steering wheel, bulldozing resistance acting on steering wheel rims and side surfaces respectively areconducted on the basis of the wheel-loose soil interaction. The quantitative relation between steering resistancemoment (SRM) and steering radius, dimension of the wheel, soil parameters is established. Tovalidate the model, a single-wheel test bed is employed to test the steering performance of a wheel with0.15735m radius and 0.165m width when the steering radius is 0.00m, 0.04m, 0.08m, 0.12m and0.16m, respectively. The SRM is approached asymptotically with the increasing steering angle and almostproportional to the steering radius. The theoretical results of SRM are compact with the experimental results,which shows that the steering model can predict the experimental results well.
