Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains,resulting in...Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains,resulting in poor formability at room temperature.Therefore,the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets.The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al(wt.%)alloy during various annealed temperatures ranging from 300℃ to 450℃,have been investigated using the quasi in-situ electron backscatter diffraction(EBSD)method.The as-rolled Mg-1Al alloy shows a dominant basal texture,which weakens and broadens in the rolling direction(RD)during the subsequent annealing,accompanied by the formation of{1010}texture component.Particularly,the {1010} texture component is more pronounced after annealing at high temperatures.The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands,which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45°from the normal direction(ND).Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process,resulting in a reduction in the texture intensity.Moreover,recrystallized grains belonging to the {1010}texture component grow preferentially compared to those with other orientations,which is attributed to low energy grain boundaries,especially grain boundaries with∼30°misorientation angles.Furthermore,the high temperature annealing facilitates the rapid growth of grain boundaries having a 30°misorientation angle,leading to the occurrence of distinct {1010} texture after annealing at 450℃ for 1 h.The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.展开更多
In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data be...In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.展开更多
Dispersion measure in an FRB’s signal is produced by the photons of the radio waves interacting with the free electrons in the IGM. In New Tired Light (NTL), redshifts are produced by the photons of light interacting...Dispersion measure in an FRB’s signal is produced by the photons of the radio waves interacting with the free electrons in the IGM. In New Tired Light (NTL), redshifts are produced by the photons of light interacting with these self-same electrons and so, one would expect a direct relationship between the DM of an FRB and the redshift of the host galaxy. However, workers in this field assume expansion and weight the DM by dividing it by the scale factor (1 + z) to allow for expansion. Once this weighting is removed, it was predicted back in 2016 (when the first FRB was localized) and later presented at a conference and published in the proceedings that, as more FRB’s were localized, a graph of DM versus ln(1 + z) would be a straight line of gradient (mec/2hre) or 7.32 × 1025 m−2 in SI units. The original paper had twenty-four data points but this has risen significantly to sixty-four useable FRB’s and so this corrigendum updates that paper so that all sixty-four are used. The data give a straight-line graph of gradient 7.12 × 1025 m−2, a difference of 3% from (mec/2hre) predicted nine years earlier.展开更多
Due to their superior properties, the interest in nanostructures is increasing today in engineering. This study presents a new two-noded curved finite element for analyzing the in-plane static behaviors of curved nano...Due to their superior properties, the interest in nanostructures is increasing today in engineering. This study presents a new two-noded curved finite element for analyzing the in-plane static behaviors of curved nanobeams. Opposite to traditional curved finite elements developed by using approximate interpolation functions, the proposed curved finite element is developed by using exact analytical solutions. Although this approach was first introduced for analyzing the mechanical behaviors of macro-scale curved beams by adopting the local theory of elasticity, the exact analytical expressions used in this study were obtained from the solutions of governing equations that were expressed via the differential form of the nonlocal theory of elasticity. Therefore, the effects of shear strain and axial extension included in the analytical formulation are also inherited by the curved finite element developed here. The rigidity matrix and the consistent force vector are developed for a circular finite element. To demonstrate the applicability of the method, static analyses of various curved nanobeams subjected to different boundary conditions and loading scenarios are performed, and the obtained results are compared with the exact analytical ones. The presented study provides an accurate and low computational cost method for researchers to investigate the in-plane static behavior of curved nanobeams.展开更多
Rotary steering systems(RSSs)have been increasingly used to develop horizontal wells.A static push-the-bit RSS uses three hydraulic modules with varying degrees of expansion and contraction to achieve changes in the p...Rotary steering systems(RSSs)have been increasingly used to develop horizontal wells.A static push-the-bit RSS uses three hydraulic modules with varying degrees of expansion and contraction to achieve changes in the pushing force acting on the wellbore in different sizes and directions within a circular range,ultimately allowing the wellbore trajectory to be drilled in a predetermined direction.By analyzing its mathematical principles and the actual characteristics of the instrument,a vector force closed-loop control method,including steering and holding modes,was designed.The adjustment criteria for the three hydraulic modules are determined to achieve rapid adjustment of the vector force.The theoretical feasibility of the developed method was verified by comparing its results with the on-site application data of an imported rotary guidance system.展开更多
Understanding the reinforcement effect of the newly developed prestressed reinforcement components(PRCs)(a system composed of prestressed steel bars(PSBs),protective sleeves,lateral pressure plates(LPPs),and anchoring...Understanding the reinforcement effect of the newly developed prestressed reinforcement components(PRCs)(a system composed of prestressed steel bars(PSBs),protective sleeves,lateral pressure plates(LPPs),and anchoring elements)is technically significant for the rational design of prestressed subgrade.A three-dimensional finite element model was established and verified based on a novel static model test and utilized to systematically analyze the influence of prestress levels and reinforcement modes on the reinforcement effect of the subgrade.The results show that the PRCs provide additional confining pressure to the subgrade through the diffusion effect of the prestress,which can therefore effectively improve the service performance of the subgrade.Compared to the unreinforced conventional subgrades,the settlements of prestressreinforced subgrades are reduced.The settlement attenuation rate(Rs)near the LPPs is larger than that at the subgrade center,and increasing the prestress positively contributes to the stability of the subgrade structure.In the multi-row reinforcement mode,the reinforcement effect of PRCs can extend from the reinforced area to the unreinforced area.In addition,as the horizontal distance from the LPPs increases,the additional confining pressure converted by the PSBs and LPPs gradually diminishes when spreading to the core load bearing area of the subgrade,resulting in a decrease in the Rs.Under the singlerow reinforcement mode,PRCs can be strategically arranged according to the local areas where subgrade defects readily occurred or observed,to obtain the desired reinforcement effect.Moreover,excessive prestress should not be applied near the subgrade shoulder line to avoid the shear failure of the subgrade shoulder.PRCs can be flexibly used for preventing and treating various subgrade defects of newly constructed or existing railway lines,achieving targeted and classified prevention,and effectively improving the bearing performance and deformation resistance of the subgrade.The research results are instructive for further elucidating the prestress reinforcement effect of PRCs on railway subgrades.展开更多
The flocculation behavior of carbon black (CB)-filled isoprene rubber (IR) nanocomposites was systematically investigated under both dynamic and static conditions to unravel the distinct mechanisms governing filler ne...The flocculation behavior of carbon black (CB)-filled isoprene rubber (IR) nanocomposites was systematically investigated under both dynamic and static conditions to unravel the distinct mechanisms governing filler network evolution.Under dynamic conditions,small oscillatory shear strains (0.1%) significantly enhanced filler particle motion,leading to pronounced agglomeration and a flocculation degree of about 4.3MPa at 145℃.In contrast,static flocculation exhibited a fundamentally different mechanism dominated by polymer chain dynamics,which is driven mainly by thermal activation.Radial distribution function (RDF) analysis of transmission electron microscopy (TEM) images revealed a slight decrease (2 nm) in the interparticle distance peak after static annealing at 100℃ for 7 h,indicating localized motion of CB particles.However,the overall filler network remained stable,with no significant agglomeration observed.The increase in bound rubber content from about 23% to 28% with rising temperature further confirmed the dominant role of polymer chain adsorption and interfacial reinforcement in static flocculation.These findings highlight the critical influence of external strain on filler network formation and provide new insights into the polymer-dominated mechanism of static flocculation.The results offer practical guidance for optimizing the storage and processing of rubber nanocomposites,particularly in applications where static flocculation during prolonged storage is a concern.展开更多
Purpose–This study solves the key problem that the static level monitoring is susceptible to temperature interference and affects the accuracy in slope instability/deformation monitoring.The purpose is to develop a r...Purpose–This study solves the key problem that the static level monitoring is susceptible to temperature interference and affects the accuracy in slope instability/deformation monitoring.The purpose is to develop a reliable temperature compensation method for the system,improve the accuracy of slope stability monitoring and provide support for improving the safety and safety monitoring of engineering spoil slope and other projects.Design/methodology/approach–Combined with theoretical analysis and experimental verification,the temperature compensation method is explored.The working principle of the hydrostatic leveling monitoring system is analyzed and the data processing formula,the temperature error calculation formula and the calculation formula for eliminating the error settlement value are derived.The temperature compensation method is established and verified by the field test of the engineering spoil slope which is disturbed by a debris flow.Findings–The experimental results show that this method can reduce the error of the static level monitoring system by about 40%.The field test shows that the fluctuation of slope settlement monitoring value is reduced after temperature compensation and the monitoring value is consistent with the actual situation,which has certain practicability.Originality/value–The originality of this study is to derive a theoretical formula for quantifying/eliminating temperature errors in static leveling and to establish a practical temperature compensation method.The accuracy of the system is improved,which provides a reference for slope stability monitoring under complex environment(especially railway geotechnical engineering)and promotes the development of precision monitoring technology.展开更多
The accuracy of the full-scale aircraft static tests is greatly influenced by the aircraft attitude.This paper proposes an aircraft attitude optimization method based on the characteristics of the test.The aim is to a...The accuracy of the full-scale aircraft static tests is greatly influenced by the aircraft attitude.This paper proposes an aircraft attitude optimization method based on the characteristics of the test.The aim is to address three typical problems of ttitude control in the full-scale aircraft static tests:(1)The coupling of rigid-body displacement and elastic deformation after large deformation,(2)the difficulty of characterizing the aircraft attitude by measurable structure,and(3)the insufficient adaptability of the center of gravity reference to complex loading conditions.The methodology involves the establishment of two observation coordinate systems,a ground coordinate system and an airframe coordinate system,and two deformation states,before and after airframe deformation.A subsequent analysis of the parameter changes of these two states under different coordinate systems is then undertaken,with the objective being to identify the key parameters affecting the attitude control accuracy of large deformation aircraft.Three optimization objective functions are established according to the test loading characteristics and the purpose of the test:(1)To minimize the full-scale aircraft loading angle error,(2)to minimize the full-scale aircraft loading additional load,and(3)to minimize the full-scale aircraft loading wing root additional bending moment.The optimization calculation results are obtained by using the particle swarm optimization algorithm,and the typical full-scale aircraft static test load condition of large passenger aircraft is taken as an example.The analysis of the results demonstrates that by customizing the measurable structure of the aircraft as the observation point for the aircraft attitude,and by obtaining the translational and rotational control parameters of the observation point during the test based on the optimization objective function,the results are reasonable,and the project can be implemented and used to control the aircraft's attitude more accurately in complex force test conditions.展开更多
Static magnetic field(SMF)exposure exerts notable regulatory effects on metabolic disorders,yet its influence on metabolic dysfunction-associated fatty liver disease(MAFLD)and gut microbiota during disease progression...Static magnetic field(SMF)exposure exerts notable regulatory effects on metabolic disorders,yet its influence on metabolic dysfunction-associated fatty liver disease(MAFLD)and gut microbiota during disease progression remains unclear.In this study,MAFLD was induced in mice via a high-fat diet(HFD),followed by exposure to a 0.2 T SMF for 12 h per day over a 10 week period.SMF treatment significantly attenuated body weight gain,alleviated hepatic lipid accumulation,and improved liver function.Sequencing analysis of intestinal contents revealed a significant increase in microbial diversity and enrichment of beneficial bacterial taxa under SMF exposure.Integrated multi-omics analysis and Spearman correlation further demonstrated that SMF significantly reduced the expression of genes involved in fatty acid synthesis and modulated pathways related to polyunsaturated fatty acid and glutamate metabolism,in close association with shifts in beneficial gut microbiota.Furthermore,transcriptomic profiling of liver tissue indicated that SMF inhibited fatty acid synthesis and elongation by regulating the expression of peroxisome proliferator-activated receptorγ(PPARγ),thereby contributing to reduced hepatic burden.These findings highlight SMF as a promising non-invasive strategy for MAFLD intervention and provide insights into the microbiota-mediated metabolic axis underlying its therapeutic effects.展开更多
Static disorder plays a crucial role in the electronic dynamics and spec-troscopy of complex molecular sys-tems.Traditionally,obtaining ob-servables averaged over static disor-der requires thousands of realiza-tions v...Static disorder plays a crucial role in the electronic dynamics and spec-troscopy of complex molecular sys-tems.Traditionally,obtaining ob-servables averaged over static disor-der requires thousands of realiza-tions via direct sampling of the dis-order distribution,leading to high computational costs.In this work,we extend the auxiliary degree-of-freedom based matrix product state(MPS)method to handle system-bath correlated thermal equilibrium initial states,which can capture static disorder effects using a one-shot quantum dynamical simulation.We validate the effectiveness of the extended method by computing the dipole-dipole time correlation function of the Holstein model relevant to the emission spectrum of molecular aggregates.Our results show that the one-shot method is very accu-rate with only a moderate increase in MPS bond dimension,thereby significantly reducing computational cost.Moreover,it enables the generation of a much larger number of samples than the conventional direct sampling method at negligible additional cost,thus reducing sta-tistical errors.This method provides a broadly useful tool for calculating equilibrium time cor-relation functions in system-bath coupled models with static disorder.展开更多
A low-alloyed Mg−1.2Zn−0.1Ca alloy was extruded at 150℃,followed by annealing at varying temperatures of 200−300℃.The microstructural evolution and static recrystallization kinetics were investigated.The as-extruded...A low-alloyed Mg−1.2Zn−0.1Ca alloy was extruded at 150℃,followed by annealing at varying temperatures of 200−300℃.The microstructural evolution and static recrystallization kinetics were investigated.The as-extruded alloy exhibited a bimodal structure consisting of fine recrystallized grains of 0.8μm and coarse un-recrystallized grains,with a recrystallized fraction of~67%.The recrystallization process at 250°C was identified to be appropriate with a slow recrystallized grain growth rate.The grains with and orientations exhibited preferential growth advantages during long-term annealing.Grain boundary segregation exerted a strong Zener pinning effect on the grain boundaries,which not only increased the grain growth activation energy,but also affected the texture evolution.<2021>,<2023>,<1212><2750>.展开更多
To obtain the certificate of airworthiness,it is essential to conduct a full-scale aircraft static test.During such test,accurate and comprehensive wing deformation measurement is crucial for assessing its strength,st...To obtain the certificate of airworthiness,it is essential to conduct a full-scale aircraft static test.During such test,accurate and comprehensive wing deformation measurement is crucial for assessing its strength,stiffness,and bearing capability.This paper proposes a novel and cost-effective videogrammetric method using multi-camera system to achieve the non-contact,highprecision,and 3D measurement of overall static deformation for the large-scale wing structure.To overcome the difficulties of making,carrying,and employing the large 2D or 3D target for calibrating the cameras with large field of view,a flexible stereo cameras calibration method combining 1D target and epipolar geometry is proposed.The global calibration method,aided by a total station,is employed to unify the 3D data obtained from various binocular subsystems.A series of static load tests using a 10-meter-long large-scale wing have been conducted to validate the proposed system and methods.Furthermore,the proposed method was applied to the practical wing deformation measurement of both wings with a wingspan of 33.6 m in the full-size civil aircraft static test.The overall 3D profile and displacement data of the tested wing under various loads can be accurately obtained.The maximum error of distance and displacement measurement is less than 4.5 mm within the measurement range of 35 m in all load cases.These results demonstrate that the proposed method achieves effective,high-accuracy,on-site,and visualized wing deformation measurement,making it a promising approach for full-scale aircraft wing static test.展开更多
Earthquakes not only release the long-term accumulated stress on the seismogenic fault but may also increase the stress on some surrounding faults or other segments of the seismogenic fault,thereby raising the seismic...Earthquakes not only release the long-term accumulated stress on the seismogenic fault but may also increase the stress on some surrounding faults or other segments of the seismogenic fault,thereby raising the seismic risk on these faults.This study investigates the impact of the April 2,2024,Mw 7.4 earthquake in Hualien,Taiwan,China,on the surrounding faults and aftershocks.We analyze stress-triggering effects by calculating Coulomb stress changes(ΔCFS)using rupture models and focal mechanism data.Historical focal mechanism nodal planes serve as receiver fault parameters forΔCFS calculations.Our findings indicate signifi cant Coulomb stress loading on the Longitudinal Valley fault and Central Range structure due to the mainshock,promoting their seismic activity.Loading effects vary by fault type,with thrust and strike-slip faults experiencing more stress loading than normal and odd faults.Conversely,the rupture’s coseismic slip concentration area shows predominant stress unloading,inhibiting seismic activity in the region.Aftershocks mainly experience increasedΔCFS,suggesting that the stress-triggering induced by the mainshock considerably influences the earthquake sequence evolution.These insights are crucial for understanding aftershock patterns and enhancing seismic hazard assessments.展开更多
This study proposes a three-dimensional(3D)coupled magneto-electro-elastic problem for the static analysis of multilayered plates embedding piezomagnetic and piezoelectric layers by considering both sensor and actuato...This study proposes a three-dimensional(3D)coupled magneto-electro-elastic problem for the static analysis of multilayered plates embedding piezomagnetic and piezoelectric layers by considering both sensor and actuator configurations.The 3D governing equations for the magneto-electro-elastic static behavior of plates are explicitly show that are made by the three 3D equilibrium equations,the 3D divergence equation for magnetic induction,and the 3D divergence equation for the electric displacement.The proposed solution involves the exponential matrix in the thickness direction and primary variables’harmonic forms in the in-plane ones.A closed-form solution is performed considering simply-supported boundary conditions.Interlaminar continuity conditions are imposed for displacements,magnetic potential,electric potential,transverse shear/normal stresses,transverse normal magnetic induction and transverse normal electric displacement.Therefore,a layerwise approach is adopted.The results section is composed of an assessment part,where the present model is compared to past 3D electro-elastic or magneto-elastic formulations and a new benchmark part.Benchmarks consider sensor and actuator plate configurations for the fully coupled magneto-electro-elastic cases for different thickness ratios.Tabular and graphical results are presented for displacements,stresses,magnetic potential,electric potential,transverse normal magnetic induction and transverse normal electric displacement.For each presented benchmark,magneto-electro-elastic coupling and thickness and material layer effects are discussed in depth.展开更多
This paper presents the variational physics-informed neural network(VPINN)as an effective tool for static structural analyses.One key innovation includes the construction of the neural network solution as an admissibl...This paper presents the variational physics-informed neural network(VPINN)as an effective tool for static structural analyses.One key innovation includes the construction of the neural network solution as an admissible function of the boundary-value problem(BVP),which satisfies all geometrical boundary conditions.We then prove that the admissible neural network solution also satisfies natural boundary conditions,and therefore all boundary conditions,when the stationarity condition of the variational principle is met.Numerical examples are presented to show the advantages and effectiveness of the VPINN in comparison with the physics-informed neural network(PINN).Another contribution of the work is the introduction of Gaussian approximation of the Dirac delta function,which significantly enhances the ability of neural networks to handle singularities,as demonstrated by the examples with concentrated support conditions and loadings.It is hoped that these structural examples are so convincing that engineers would adopt the VPINN method in their structural design practice.展开更多
BACKGROUND Traditional limitations of cold static storage(CSS)on ice at 4℃during lung transplantation have necessitated limiting cold ischemic time(CIT)to 4-6 hours.Ex vivo lung perfusion(EVLP)can extend this preserv...BACKGROUND Traditional limitations of cold static storage(CSS)on ice at 4℃during lung transplantation have necessitated limiting cold ischemic time(CIT)to 4-6 hours.Ex vivo lung perfusion(EVLP)can extend this preservation time through the suspension of CIT and normothermic perfusion.As we continue to further expand the donor pool in all aspects of lung transplantation,teams are frequently traveling further distances to procure organs.AIM To determine the effect of CSS or EVLP on donors with extended travel distance[>750 nautical miles(NM)]to recipient.METHODS Lung transplants,whose donor traveled greater than 750 NM,were identified from the United Network for Organ Sharing Database.Recipients were stratified into either:CSS or EVLP,based on preservation method.Groups were assessed with comparative statistics and survival was assessed by Kaplan-Meier methods.A 3:1 propensity match was then created,and same analysis was repeated.RESULTS Prior to matching,those in the EVLP group had significantly increased postoperative morbidity to include dialysis,ventilator use,acute rejection,and treated rejection in the first year(P<0.05 for all).However,there were no significant differences in midterm survival(P=0.18).Following matching,those in the EVLP group again had significantly increased post-operative morbidity to include dialysis,extracorporeal membrane oxygenation use,ventilator use,and treated rejection in the first year(P<0.05 for all).As before,there were no significant differences in midterm survival following matching(P=0.08).CONCLUSION While there was no significant difference in survival,EVLP patients had increased peri-operative morbidity.With the advent of changes in CSS with 10℃storage further analysis is necessary to evaluate the best methods for utilizing organs from increased distances.展开更多
To establish the optimal reference trajectory for a near-space vehicle under free terminal time,a time-optimal model predictive static programming method is proposed with adaptive fish swarm optimization.First,the mod...To establish the optimal reference trajectory for a near-space vehicle under free terminal time,a time-optimal model predictive static programming method is proposed with adaptive fish swarm optimization.First,the model predictive static programming method is developed by incorporating neighboring terms and trust region,enabling rapid generation of precise optimal solutions.Next,an adaptive fish swarm optimization technique is employed to identify a sub-optimal solution,while a momentum gradient descent method with learning rate decay ensures the convergence to the global optimal solution.To validate the feasibility and accuracy of the proposed method,a near-space vehicle example is analyzed and simulated during its glide phase.The simulation results demonstrate that the proposed method aligns with theoretical derivations and outperforms existing methods in terms of convergence speed and accuracy.Therefore,the proposed method offers significant practical value for solving the fast trajectory optimization problem in near-space vehicle applications.展开更多
A geomagnetic field is a significant factor dur-ing the growth and development of trees.Changes in the magnetic field(MF)will result in reactions at the biochemi-cal,molecular,cellular and gene levels.However,it is no...A geomagnetic field is a significant factor dur-ing the growth and development of trees.Changes in the magnetic field(MF)will result in reactions at the biochemi-cal,molecular,cellular and gene levels.However,it is not clear how a magnetic field affects metabolism and home-ostasis under stressful conditions such as salinity.In this study,a novel method was developed of a static magnetic field(SMF)to investigate magnetobiological changes in trees.The results show that pre-treatment of poplar(Popu-lus×euramericana‘Neva’)cuttings with a static magnetic field significantly mitigated the negative effects of salinity stress on their growth and physiological activities.Bio-chemical assays revealed that several chemical messengers,including hydrogen peroxide(H2O2)and O_(2)^(·-),were sig-nificantly improved in roots treated with salt,implying an increase reactive oxygen species.A static magnetic field also significantly increased proline concentrations,soluble protein contents,and CAT and SOD activities.Electrophysiological experiments further revealed that pre-treatment with a static magnetic field remarkably decreased salt-induced Na^(+)influx and H^(+)efflux which control plant salt tolerance.In pharmacological experiments,because the Na^(+)/H^(+)cor-relation was closely related to the SMF-activated plasma membrane and Na^(+)antiporter activity alleviated the mas-sive accumulation of salt-induced reactive oxygen spe-cies(ROS)within the roots.In addition,a static magnetic field dramatically increased the transcriptional activity of stress-responsive genes,including PtrRBOHD and PtrHA5.Together,these results indicate that SMF reduced Na^(+)influx by activating Na^(+)/H^(+)antiporters and plasma membrane H^(+)-ATPase to effectively maintain homeostasis by regu-lating the reactive oxygen species system and cytoplasmic osmotic potential.Ultimately,these static magnetic field methods improved salt tolerance in poplar cuttings,and,for future research,similar methods could be applied to other plants.展开更多
Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China a...Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.展开更多
基金by National Natural Science Foundation of China(Nos.52271103,52334010 and 52271031)Jilin Scientific and Technological Development Program(Nos.20220301026GX,20210201115GX and 20210301041GX).
文摘Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains,resulting in poor formability at room temperature.Therefore,the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets.The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al(wt.%)alloy during various annealed temperatures ranging from 300℃ to 450℃,have been investigated using the quasi in-situ electron backscatter diffraction(EBSD)method.The as-rolled Mg-1Al alloy shows a dominant basal texture,which weakens and broadens in the rolling direction(RD)during the subsequent annealing,accompanied by the formation of{1010}texture component.Particularly,the {1010} texture component is more pronounced after annealing at high temperatures.The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands,which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45°from the normal direction(ND).Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process,resulting in a reduction in the texture intensity.Moreover,recrystallized grains belonging to the {1010}texture component grow preferentially compared to those with other orientations,which is attributed to low energy grain boundaries,especially grain boundaries with∼30°misorientation angles.Furthermore,the high temperature annealing facilitates the rapid growth of grain boundaries having a 30°misorientation angle,leading to the occurrence of distinct {1010} texture after annealing at 450℃ for 1 h.The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.
基金supported in part by the National Natural Science Foundation of China(62125306)Zhejiang Key Research and Development Project(2024C01163)the State Key Laboratory of Industrial Control Technology,China(ICT2024A06)
文摘In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.
文摘Dispersion measure in an FRB’s signal is produced by the photons of the radio waves interacting with the free electrons in the IGM. In New Tired Light (NTL), redshifts are produced by the photons of light interacting with these self-same electrons and so, one would expect a direct relationship between the DM of an FRB and the redshift of the host galaxy. However, workers in this field assume expansion and weight the DM by dividing it by the scale factor (1 + z) to allow for expansion. Once this weighting is removed, it was predicted back in 2016 (when the first FRB was localized) and later presented at a conference and published in the proceedings that, as more FRB’s were localized, a graph of DM versus ln(1 + z) would be a straight line of gradient (mec/2hre) or 7.32 × 1025 m−2 in SI units. The original paper had twenty-four data points but this has risen significantly to sixty-four useable FRB’s and so this corrigendum updates that paper so that all sixty-four are used. The data give a straight-line graph of gradient 7.12 × 1025 m−2, a difference of 3% from (mec/2hre) predicted nine years earlier.
基金supported by Scientific Research Projects Department of Istanbul Technical University.Project Number:MGA-2018-41546.Grant receiver:E.T.
文摘Due to their superior properties, the interest in nanostructures is increasing today in engineering. This study presents a new two-noded curved finite element for analyzing the in-plane static behaviors of curved nanobeams. Opposite to traditional curved finite elements developed by using approximate interpolation functions, the proposed curved finite element is developed by using exact analytical solutions. Although this approach was first introduced for analyzing the mechanical behaviors of macro-scale curved beams by adopting the local theory of elasticity, the exact analytical expressions used in this study were obtained from the solutions of governing equations that were expressed via the differential form of the nonlocal theory of elasticity. Therefore, the effects of shear strain and axial extension included in the analytical formulation are also inherited by the curved finite element developed here. The rigidity matrix and the consistent force vector are developed for a circular finite element. To demonstrate the applicability of the method, static analyses of various curved nanobeams subjected to different boundary conditions and loading scenarios are performed, and the obtained results are compared with the exact analytical ones. The presented study provides an accurate and low computational cost method for researchers to investigate the in-plane static behavior of curved nanobeams.
基金supported by the Opening Foundation of China National Logging Corporation(CNLC20229C06)the China Petroleum Technical Service Corporation's science project'Development and application of 475 rotary steering system'(2024T-001001)。
文摘Rotary steering systems(RSSs)have been increasingly used to develop horizontal wells.A static push-the-bit RSS uses three hydraulic modules with varying degrees of expansion and contraction to achieve changes in the pushing force acting on the wellbore in different sizes and directions within a circular range,ultimately allowing the wellbore trajectory to be drilled in a predetermined direction.By analyzing its mathematical principles and the actual characteristics of the instrument,a vector force closed-loop control method,including steering and holding modes,was designed.The adjustment criteria for the three hydraulic modules are determined to achieve rapid adjustment of the vector force.The theoretical feasibility of the developed method was verified by comparing its results with the on-site application data of an imported rotary guidance system.
基金supported by the National Natural Science Foundation of China(Grant Nos.51978672 and 52308335)the Natural Science Funding of Hunan Province(Grant No.2023JJ41054)the Natural Science Research Project of Anhui Educational Committee(Grant No.2023AH051170)。
文摘Understanding the reinforcement effect of the newly developed prestressed reinforcement components(PRCs)(a system composed of prestressed steel bars(PSBs),protective sleeves,lateral pressure plates(LPPs),and anchoring elements)is technically significant for the rational design of prestressed subgrade.A three-dimensional finite element model was established and verified based on a novel static model test and utilized to systematically analyze the influence of prestress levels and reinforcement modes on the reinforcement effect of the subgrade.The results show that the PRCs provide additional confining pressure to the subgrade through the diffusion effect of the prestress,which can therefore effectively improve the service performance of the subgrade.Compared to the unreinforced conventional subgrades,the settlements of prestressreinforced subgrades are reduced.The settlement attenuation rate(Rs)near the LPPs is larger than that at the subgrade center,and increasing the prestress positively contributes to the stability of the subgrade structure.In the multi-row reinforcement mode,the reinforcement effect of PRCs can extend from the reinforced area to the unreinforced area.In addition,as the horizontal distance from the LPPs increases,the additional confining pressure converted by the PSBs and LPPs gradually diminishes when spreading to the core load bearing area of the subgrade,resulting in a decrease in the Rs.Under the singlerow reinforcement mode,PRCs can be strategically arranged according to the local areas where subgrade defects readily occurred or observed,to obtain the desired reinforcement effect.Moreover,excessive prestress should not be applied near the subgrade shoulder line to avoid the shear failure of the subgrade shoulder.PRCs can be flexibly used for preventing and treating various subgrade defects of newly constructed or existing railway lines,achieving targeted and classified prevention,and effectively improving the bearing performance and deformation resistance of the subgrade.The research results are instructive for further elucidating the prestress reinforcement effect of PRCs on railway subgrades.
基金supported by the National Natural Science Foundation of China(No.52293471)National Key R&D Program of China(No.2022YFB3707303).
文摘The flocculation behavior of carbon black (CB)-filled isoprene rubber (IR) nanocomposites was systematically investigated under both dynamic and static conditions to unravel the distinct mechanisms governing filler network evolution.Under dynamic conditions,small oscillatory shear strains (0.1%) significantly enhanced filler particle motion,leading to pronounced agglomeration and a flocculation degree of about 4.3MPa at 145℃.In contrast,static flocculation exhibited a fundamentally different mechanism dominated by polymer chain dynamics,which is driven mainly by thermal activation.Radial distribution function (RDF) analysis of transmission electron microscopy (TEM) images revealed a slight decrease (2 nm) in the interparticle distance peak after static annealing at 100℃ for 7 h,indicating localized motion of CB particles.However,the overall filler network remained stable,with no significant agglomeration observed.The increase in bound rubber content from about 23% to 28% with rising temperature further confirmed the dominant role of polymer chain adsorption and interfacial reinforcement in static flocculation.These findings highlight the critical influence of external strain on filler network formation and provide new insights into the polymer-dominated mechanism of static flocculation.The results offer practical guidance for optimizing the storage and processing of rubber nanocomposites,particularly in applications where static flocculation during prolonged storage is a concern.
基金funded by the Scientific Research Project of China Academy of Railway Sciences Group Co.,Ltd(No.2024YJ332 and No.2024QT005)Scientific Research Special Project of China State Railway Group Co.,Ltd(No.TICSTR-2024-Ⅳ-007).
文摘Purpose–This study solves the key problem that the static level monitoring is susceptible to temperature interference and affects the accuracy in slope instability/deformation monitoring.The purpose is to develop a reliable temperature compensation method for the system,improve the accuracy of slope stability monitoring and provide support for improving the safety and safety monitoring of engineering spoil slope and other projects.Design/methodology/approach–Combined with theoretical analysis and experimental verification,the temperature compensation method is explored.The working principle of the hydrostatic leveling monitoring system is analyzed and the data processing formula,the temperature error calculation formula and the calculation formula for eliminating the error settlement value are derived.The temperature compensation method is established and verified by the field test of the engineering spoil slope which is disturbed by a debris flow.Findings–The experimental results show that this method can reduce the error of the static level monitoring system by about 40%.The field test shows that the fluctuation of slope settlement monitoring value is reduced after temperature compensation and the monitoring value is consistent with the actual situation,which has certain practicability.Originality/value–The originality of this study is to derive a theoretical formula for quantifying/eliminating temperature errors in static leveling and to establish a practical temperature compensation method.The accuracy of the system is improved,which provides a reference for slope stability monitoring under complex environment(especially railway geotechnical engineering)and promotes the development of precision monitoring technology.
基金supported in part by the National Specialized Research Project(No.XXZ3-XX21-3).
文摘The accuracy of the full-scale aircraft static tests is greatly influenced by the aircraft attitude.This paper proposes an aircraft attitude optimization method based on the characteristics of the test.The aim is to address three typical problems of ttitude control in the full-scale aircraft static tests:(1)The coupling of rigid-body displacement and elastic deformation after large deformation,(2)the difficulty of characterizing the aircraft attitude by measurable structure,and(3)the insufficient adaptability of the center of gravity reference to complex loading conditions.The methodology involves the establishment of two observation coordinate systems,a ground coordinate system and an airframe coordinate system,and two deformation states,before and after airframe deformation.A subsequent analysis of the parameter changes of these two states under different coordinate systems is then undertaken,with the objective being to identify the key parameters affecting the attitude control accuracy of large deformation aircraft.Three optimization objective functions are established according to the test loading characteristics and the purpose of the test:(1)To minimize the full-scale aircraft loading angle error,(2)to minimize the full-scale aircraft loading additional load,and(3)to minimize the full-scale aircraft loading wing root additional bending moment.The optimization calculation results are obtained by using the particle swarm optimization algorithm,and the typical full-scale aircraft static test load condition of large passenger aircraft is taken as an example.The analysis of the results demonstrates that by customizing the measurable structure of the aircraft as the observation point for the aircraft attitude,and by obtaining the translational and rotational control parameters of the observation point during the test based on the optimization objective function,the results are reasonable,and the project can be implemented and used to control the aircraft's attitude more accurately in complex force test conditions.
基金supported by the National Natural Science Foundation of China(32470122)Heye Health Technology Chong Ming Project(HYCMP-2023006)。
文摘Static magnetic field(SMF)exposure exerts notable regulatory effects on metabolic disorders,yet its influence on metabolic dysfunction-associated fatty liver disease(MAFLD)and gut microbiota during disease progression remains unclear.In this study,MAFLD was induced in mice via a high-fat diet(HFD),followed by exposure to a 0.2 T SMF for 12 h per day over a 10 week period.SMF treatment significantly attenuated body weight gain,alleviated hepatic lipid accumulation,and improved liver function.Sequencing analysis of intestinal contents revealed a significant increase in microbial diversity and enrichment of beneficial bacterial taxa under SMF exposure.Integrated multi-omics analysis and Spearman correlation further demonstrated that SMF significantly reduced the expression of genes involved in fatty acid synthesis and modulated pathways related to polyunsaturated fatty acid and glutamate metabolism,in close association with shifts in beneficial gut microbiota.Furthermore,transcriptomic profiling of liver tissue indicated that SMF inhibited fatty acid synthesis and elongation by regulating the expression of peroxisome proliferator-activated receptorγ(PPARγ),thereby contributing to reduced hepatic burden.These findings highlight SMF as a promising non-invasive strategy for MAFLD intervention and provide insights into the microbiota-mediated metabolic axis underlying its therapeutic effects.
基金supported by the National Natural Science Foundation of China(No.22273005 and No.22422301)the Innovation Program for Quantum Science and Technology(No.2023ZD0300200)+1 种基金the National Security Academic Foundation(No.U2330201)the Fundamental Research Funds for the Central Universities.
文摘Static disorder plays a crucial role in the electronic dynamics and spec-troscopy of complex molecular sys-tems.Traditionally,obtaining ob-servables averaged over static disor-der requires thousands of realiza-tions via direct sampling of the dis-order distribution,leading to high computational costs.In this work,we extend the auxiliary degree-of-freedom based matrix product state(MPS)method to handle system-bath correlated thermal equilibrium initial states,which can capture static disorder effects using a one-shot quantum dynamical simulation.We validate the effectiveness of the extended method by computing the dipole-dipole time correlation function of the Holstein model relevant to the emission spectrum of molecular aggregates.Our results show that the one-shot method is very accu-rate with only a moderate increase in MPS bond dimension,thereby significantly reducing computational cost.Moreover,it enables the generation of a much larger number of samples than the conventional direct sampling method at negligible additional cost,thus reducing sta-tistical errors.This method provides a broadly useful tool for calculating equilibrium time cor-relation functions in system-bath coupled models with static disorder.
基金sponsored by the Key-Area Research and Development Program of Guangdong Province,China(No.2020B010186002)the Natural Science Foundation of Guangdong for Research Team,China(No.2015A030312003)National Study Abroad Fund.D.L.CHEN is also grateful for the financial support by Natural Sciences and Engineering Research Council of Canada(NSERC).
文摘A low-alloyed Mg−1.2Zn−0.1Ca alloy was extruded at 150℃,followed by annealing at varying temperatures of 200−300℃.The microstructural evolution and static recrystallization kinetics were investigated.The as-extruded alloy exhibited a bimodal structure consisting of fine recrystallized grains of 0.8μm and coarse un-recrystallized grains,with a recrystallized fraction of~67%.The recrystallization process at 250°C was identified to be appropriate with a slow recrystallized grain growth rate.The grains with and orientations exhibited preferential growth advantages during long-term annealing.Grain boundary segregation exerted a strong Zener pinning effect on the grain boundaries,which not only increased the grain growth activation energy,but also affected the texture evolution.<2021>,<2023>,<1212><2750>.
文摘To obtain the certificate of airworthiness,it is essential to conduct a full-scale aircraft static test.During such test,accurate and comprehensive wing deformation measurement is crucial for assessing its strength,stiffness,and bearing capability.This paper proposes a novel and cost-effective videogrammetric method using multi-camera system to achieve the non-contact,highprecision,and 3D measurement of overall static deformation for the large-scale wing structure.To overcome the difficulties of making,carrying,and employing the large 2D or 3D target for calibrating the cameras with large field of view,a flexible stereo cameras calibration method combining 1D target and epipolar geometry is proposed.The global calibration method,aided by a total station,is employed to unify the 3D data obtained from various binocular subsystems.A series of static load tests using a 10-meter-long large-scale wing have been conducted to validate the proposed system and methods.Furthermore,the proposed method was applied to the practical wing deformation measurement of both wings with a wingspan of 33.6 m in the full-size civil aircraft static test.The overall 3D profile and displacement data of the tested wing under various loads can be accurately obtained.The maximum error of distance and displacement measurement is less than 4.5 mm within the measurement range of 35 m in all load cases.These results demonstrate that the proposed method achieves effective,high-accuracy,on-site,and visualized wing deformation measurement,making it a promising approach for full-scale aircraft wing static test.
基金supported by the National Natural Science Foundation of China(42364005,42174074,42064008 and 41704053)Science&Technology Fundamental Resources Investigation Program(Grant No.2023FY201500)+1 种基金Science and Technology Plan Project of Jiangxi Province(20212BCJ23002,20232ACB213013)the East China University of Technology Research Foundation for Advanced Talents(ECUT)(DHBK2019084)。
文摘Earthquakes not only release the long-term accumulated stress on the seismogenic fault but may also increase the stress on some surrounding faults or other segments of the seismogenic fault,thereby raising the seismic risk on these faults.This study investigates the impact of the April 2,2024,Mw 7.4 earthquake in Hualien,Taiwan,China,on the surrounding faults and aftershocks.We analyze stress-triggering effects by calculating Coulomb stress changes(ΔCFS)using rupture models and focal mechanism data.Historical focal mechanism nodal planes serve as receiver fault parameters forΔCFS calculations.Our findings indicate signifi cant Coulomb stress loading on the Longitudinal Valley fault and Central Range structure due to the mainshock,promoting their seismic activity.Loading effects vary by fault type,with thrust and strike-slip faults experiencing more stress loading than normal and odd faults.Conversely,the rupture’s coseismic slip concentration area shows predominant stress unloading,inhibiting seismic activity in the region.Aftershocks mainly experience increasedΔCFS,suggesting that the stress-triggering induced by the mainshock considerably influences the earthquake sequence evolution.These insights are crucial for understanding aftershock patterns and enhancing seismic hazard assessments.
文摘This study proposes a three-dimensional(3D)coupled magneto-electro-elastic problem for the static analysis of multilayered plates embedding piezomagnetic and piezoelectric layers by considering both sensor and actuator configurations.The 3D governing equations for the magneto-electro-elastic static behavior of plates are explicitly show that are made by the three 3D equilibrium equations,the 3D divergence equation for magnetic induction,and the 3D divergence equation for the electric displacement.The proposed solution involves the exponential matrix in the thickness direction and primary variables’harmonic forms in the in-plane ones.A closed-form solution is performed considering simply-supported boundary conditions.Interlaminar continuity conditions are imposed for displacements,magnetic potential,electric potential,transverse shear/normal stresses,transverse normal magnetic induction and transverse normal electric displacement.Therefore,a layerwise approach is adopted.The results section is composed of an assessment part,where the present model is compared to past 3D electro-elastic or magneto-elastic formulations and a new benchmark part.Benchmarks consider sensor and actuator plate configurations for the fully coupled magneto-electro-elastic cases for different thickness ratios.Tabular and graphical results are presented for displacements,stresses,magnetic potential,electric potential,transverse normal magnetic induction and transverse normal electric displacement.For each presented benchmark,magneto-electro-elastic coupling and thickness and material layer effects are discussed in depth.
基金supported by the National Natural Science Foundation of China(Nos.12072118 and12372029)。
文摘This paper presents the variational physics-informed neural network(VPINN)as an effective tool for static structural analyses.One key innovation includes the construction of the neural network solution as an admissible function of the boundary-value problem(BVP),which satisfies all geometrical boundary conditions.We then prove that the admissible neural network solution also satisfies natural boundary conditions,and therefore all boundary conditions,when the stationarity condition of the variational principle is met.Numerical examples are presented to show the advantages and effectiveness of the VPINN in comparison with the physics-informed neural network(PINN).Another contribution of the work is the introduction of Gaussian approximation of the Dirac delta function,which significantly enhances the ability of neural networks to handle singularities,as demonstrated by the examples with concentrated support conditions and loadings.It is hoped that these structural examples are so convincing that engineers would adopt the VPINN method in their structural design practice.
基金Supported by The Jewel and Frank Benson Family Endowmentand The Jewel and Frank Benson Research Professorship.
文摘BACKGROUND Traditional limitations of cold static storage(CSS)on ice at 4℃during lung transplantation have necessitated limiting cold ischemic time(CIT)to 4-6 hours.Ex vivo lung perfusion(EVLP)can extend this preservation time through the suspension of CIT and normothermic perfusion.As we continue to further expand the donor pool in all aspects of lung transplantation,teams are frequently traveling further distances to procure organs.AIM To determine the effect of CSS or EVLP on donors with extended travel distance[>750 nautical miles(NM)]to recipient.METHODS Lung transplants,whose donor traveled greater than 750 NM,were identified from the United Network for Organ Sharing Database.Recipients were stratified into either:CSS or EVLP,based on preservation method.Groups were assessed with comparative statistics and survival was assessed by Kaplan-Meier methods.A 3:1 propensity match was then created,and same analysis was repeated.RESULTS Prior to matching,those in the EVLP group had significantly increased postoperative morbidity to include dialysis,ventilator use,acute rejection,and treated rejection in the first year(P<0.05 for all).However,there were no significant differences in midterm survival(P=0.18).Following matching,those in the EVLP group again had significantly increased post-operative morbidity to include dialysis,extracorporeal membrane oxygenation use,ventilator use,and treated rejection in the first year(P<0.05 for all).As before,there were no significant differences in midterm survival following matching(P=0.08).CONCLUSION While there was no significant difference in survival,EVLP patients had increased peri-operative morbidity.With the advent of changes in CSS with 10℃storage further analysis is necessary to evaluate the best methods for utilizing organs from increased distances.
基金supported by the National Science Foundation for Distinguished Young Scholars of China(No.52425212)National Key Research and Development Program of China(No.2021YFA0717100)National Natural Science Foundation of China(Nos.12072270,U2013206,and 52442214).
文摘To establish the optimal reference trajectory for a near-space vehicle under free terminal time,a time-optimal model predictive static programming method is proposed with adaptive fish swarm optimization.First,the model predictive static programming method is developed by incorporating neighboring terms and trust region,enabling rapid generation of precise optimal solutions.Next,an adaptive fish swarm optimization technique is employed to identify a sub-optimal solution,while a momentum gradient descent method with learning rate decay ensures the convergence to the global optimal solution.To validate the feasibility and accuracy of the proposed method,a near-space vehicle example is analyzed and simulated during its glide phase.The simulation results demonstrate that the proposed method aligns with theoretical derivations and outperforms existing methods in terms of convergence speed and accuracy.Therefore,the proposed method offers significant practical value for solving the fast trajectory optimization problem in near-space vehicle applications.
基金supported by the the National Natural Science Foundation of China(32071751).
文摘A geomagnetic field is a significant factor dur-ing the growth and development of trees.Changes in the magnetic field(MF)will result in reactions at the biochemi-cal,molecular,cellular and gene levels.However,it is not clear how a magnetic field affects metabolism and home-ostasis under stressful conditions such as salinity.In this study,a novel method was developed of a static magnetic field(SMF)to investigate magnetobiological changes in trees.The results show that pre-treatment of poplar(Popu-lus×euramericana‘Neva’)cuttings with a static magnetic field significantly mitigated the negative effects of salinity stress on their growth and physiological activities.Bio-chemical assays revealed that several chemical messengers,including hydrogen peroxide(H2O2)and O_(2)^(·-),were sig-nificantly improved in roots treated with salt,implying an increase reactive oxygen species.A static magnetic field also significantly increased proline concentrations,soluble protein contents,and CAT and SOD activities.Electrophysiological experiments further revealed that pre-treatment with a static magnetic field remarkably decreased salt-induced Na^(+)influx and H^(+)efflux which control plant salt tolerance.In pharmacological experiments,because the Na^(+)/H^(+)cor-relation was closely related to the SMF-activated plasma membrane and Na^(+)antiporter activity alleviated the mas-sive accumulation of salt-induced reactive oxygen spe-cies(ROS)within the roots.In addition,a static magnetic field dramatically increased the transcriptional activity of stress-responsive genes,including PtrRBOHD and PtrHA5.Together,these results indicate that SMF reduced Na^(+)influx by activating Na^(+)/H^(+)antiporters and plasma membrane H^(+)-ATPase to effectively maintain homeostasis by regu-lating the reactive oxygen species system and cytoplasmic osmotic potential.Ultimately,these static magnetic field methods improved salt tolerance in poplar cuttings,and,for future research,similar methods could be applied to other plants.
基金supported by the Foundation of Institute of Geology,Chinese Academy of Geological Sciences (No. J1315)the 3D Geological Mapping Project (No. D1204)the SinoProbe-02 project of China
文摘Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.
