A series of tests were performed to investigate the macroscopic properties and the stabilization mechanism of calcium lignosulphonate modified expansive soil.Compared with natural soil,soil modified by 4%calcium ligno...A series of tests were performed to investigate the macroscopic properties and the stabilization mechanism of calcium lignosulphonate modified expansive soil.Compared with natural soil,soil modified by 4%calcium lignosulphonate showed 56.5%increased 28 days unconfined compressive strength and 23.8%decreased free expansion rate.The X-ray diffraction analysis results indicate the existence of cation exchange and the reduction of montmorillonite interplanar spacing.The X-computed tomography results demonstrate that calcium lignosulphonate decreased the porosity and optimized the pore distribution.The calcium lignosulphonate also increased the stability of the suspension system according to the Zeta potential results.Moreover,the results of rheological tests show that the moderate amount of calcium lignosulphonate enhanced the yield stress and the plastic viscosity,proving the formation of a strong connection between soil particles.展开更多
The effects of the concentration of monomer, crosslinking agent, initiator, stabilizer, and the polarity of medium on the polymerization kinetics were investigated. The results show that the rate of polymerization (Rp...The effects of the concentration of monomer, crosslinking agent, initiator, stabilizer, and the polarity of medium on the polymerization kinetics were investigated. The results show that the rate of polymerization (Rp) and conversion increased with the increase of monomer concentration from 8% to 15% (total mass); the water content in dispersion medium and the initiator 2, 2′ -azobis (isobutyronitrile) (AIBN) concentration increased as well. Rp and conversion decreases with the increase of PVP when it is low, while it increases when it is high. Moreover, PVP plays an important role in microsphere stabilization. The stabilization mechanism was investigated primarily, which involves both adsorbing mechanism and graft mechanism. Within a certain range of crosslinking degree, Rp and conversion increased with the increase of the crosslinker concentration. The effect can be ignored when crosslinker concentration is above 0.3 % (total mass), and the reason was that the monomer can hardly be diffused into the microsphere phase with a certain degree of crosslinking.展开更多
The controllable active thermo-atmosphere combustor(CATAC) has become a utilizable and effective facility because it benefits the optical diagnostics and modeling. This paper presents the modeling research of the auto...The controllable active thermo-atmosphere combustor(CATAC) has become a utilizable and effective facility because it benefits the optical diagnostics and modeling. This paper presents the modeling research of the auto-ignition and flames of the H2/N2(H2/CH4/N2,or H2/H2O2/N2) mixture on a CATAC,and shows curves varying with temperatures of auto-ignition delay,the height of the site of auto-ignition of lifted flames,and flame lift-off height. The results of auto-ignition delay and the lift-off height are compared the experimental results to validate the model. A turning point can be seen on each curve,identified with criterion temperature. It can be concluded that when the co-flow temperature is higher than the criterion temperature,the auto-ignition and lifted flame of the mixture are not stable. Conversely,below the criterion temperature,the mixture will auto-ignite in a stable fashion. Stabilization mechanisms of auto-ignition and lifted flames are analyzed in terms of the criterion temperature.展开更多
During the development of low or ultra-low permeability oil resources,the alternative energy supply becomes a prominent issue.In recent years,carbon dots(CDs)have drawn much attention owing to their application potent...During the development of low or ultra-low permeability oil resources,the alternative energy supply becomes a prominent issue.In recent years,carbon dots(CDs)have drawn much attention owing to their application potential in oil fields for reducing injection pressure and augmenting oil recovery.However,carbon dots characterized of small size,high surface energy are faced with several challenges,such as self-aggregation and settling.The preparation of stably dispersed carbon dots nanofluids is the key factor to guarantee its application performance in formation.In this work,we investigated the stability of hydrophilic carbon dots(HICDs)and hydrophobic carbon dots-Tween 80(HOCDs)nanofluids.The influences of carbon dots concentration,sorts and concentration of salt ions as well as temperature on the stability of CDs were studied.The results showed that HICDs are more sensitive to sort and concentration of salt ions,while HOCDs are more sensitive to temperature.In addition,the core flooding experiments demonstrated that the pressure reduction rate of HICDs and HOCDs nanofluids can be as high as 17.88%and 26.14%,respectively.Hence,the HICDs and HOCDs nanofluids show a good application potential in the reduction of injection pressure during the development of low and ultra-low permeability oil resources.展开更多
The activation of HCl by cationic Au in the presence of C2H2 is important for the construction of active Au sites and in acetylene hydrochlorination.Here,we report a strategy for activating HCl by the Au-based support...The activation of HCl by cationic Au in the presence of C2H2 is important for the construction of active Au sites and in acetylene hydrochlorination.Here,we report a strategy for activating HCl by the Au-based supported ionic liquid phase(Au–SILP)technology with the[N(CN)2^–]anion.This strategy enables HCl to accept electrons from[N(CN)2^–]anions in Au–[N(CN)2^–]complexes rather than from pure[Bmim][N(CN)2],leading to notable improvement in both the reaction path and the stability of the catalyst without changing the reaction triggered by acetylene adsorption.Furthermore,the induction period of the Au–SILP catalyst was shown to be absent in the reaction process due to the high Au(III)content in the Au(Ⅲ)/Au(Ⅰ)site and the high substrate diffusion rate in the ionic liquid layer.This work provides a facile method to improve the stability of Au-based catalysts for acetylene hydrochlorination.展开更多
The remediation of lead-contaminated dredged sediments(LDS)presents significant environmental challenges.This study investigates the solidification/stabilization(S/S)mechanisms of ordinary Portland cement(OPC)modified...The remediation of lead-contaminated dredged sediments(LDS)presents significant environmental challenges.This study investigates the solidification/stabilization(S/S)mechanisms of ordinary Portland cement(OPC)modified with nano-silica(NS)across a continuum from nanoscale interactions to macroscopic performance.For this,a series of macroscopic experiments was conducted to evaluate the mechanical performance and lead-encapsulation efficiency,including unconfined compressive strength(UCS)and toxicity characteristic leaching procedure(TCLP).Microstructural and phase transformations were characterized using X-ray diffraction,thermogravimetric analysis,and scanning electron microscope.Molecular dynamics simulations revealed the interactions between NS-modified cement,calcium silicate hydrates(C-S-H)gel,and Illite,focusing on interaction energies,atomic density distributions and structural changes.Macroscopic analyses demonstrated that increasing NS content from 0%to 8%improved Pb-immobilization rate from 88.7%to 97.6%and enhanced UCS from 764 kPa to 1358 kPa.These improvements were attributed to NS enhancing the microstructural integrity of C-S-H gel and filling pores in samples.Nanoscale simulations elucidated that Pb-stabilization occurs through coordination bonds with oxygen atoms in the C-S-H silicon chains and on Illite surfaces,complemented by the formation of stable Pb_(3)(CO)_(3)(OH)_(2)precipitates.Additionally,the simulations revealed that Ca^(2+)migration from hydration products to mineral surfaces generated substantial repulsive interaction energies,reducing Illite layer dispersion.However,the presence of Pb impeded further Ca^(2+)migration,leading to expansion of the C-S-H gel,which collectively degraded the mechanical properties of the material.Furthermore,wet-dry and freeze-thaw cycles showed that after 10 cycles,UCS and TCLP results still met the United States Environmental Protection Agency standards,confirming long-term durability.This study provides a theoretical foundation for resource utilization of the contaminated sediments and offers a perspective for design of the cement-based curing agents,particularly in addressing variations in pollutant concentrations and environmental conditions,advancing the application of responsive and controlled release curing agents.展开更多
Li-metal batteries(LMBs)regain research prominence owing to the ever-increasing high-energy requirements.Commercially available carbonate electrolytes exhibit unfavourable parasitic reactions with Limetal anode(LMA),l...Li-metal batteries(LMBs)regain research prominence owing to the ever-increasing high-energy requirements.Commercially available carbonate electrolytes exhibit unfavourable parasitic reactions with Limetal anode(LMA),leading to the formation of unstable solid electrolyte interphase(SEI)and the breed of Li dendrites/dead Li.Significantly,lithium nitrate(LiNO_(3)),an excellent film-forming additive,proves crucial to construct a robust Li_(3)N/Li_(2)O/Li_(x)NO_(y)-rich SEI after combining with ether-based electrolytes.Thus,the given challenge leads to natural ideas which suggest the incorporation of LiNO_(3) into commercial carbonate for practical LMBs.Regrettably,LiNO_(3) demonstrates limited solubility(~800 ppm)in commercial carbonate electrolytes.Thence,developing stable SEI and dendrite-free LMA with the incorporation of LiNO_(3) into carbonate electrolytes is an efficacious strategy to realize robust LMBs via a scalable and cost-effective route.Therefore,this review unravels the grievances between LMA,LiNO_(3)and carbonate electrolytes,and enables a comprehensive analysis of LMA stabilizing mechanism with LiNO_(3),dissolution principle of LiNO_(3) in carbonate electrolytes,and LiNO_(3) introduction strategies.This review converges attention on a point that the LiNO_(3)-introduction into commercial carbonate electrolytes is an imperious choice to realize practical LMBs with commercial 4 V layered cathode.展开更多
The stability of slope rock masses is influenced by freeze-thaw cycles in cold region,and the mechanism of stability deterioration is not clear.In order to understand the damage and progressive failure characteristics...The stability of slope rock masses is influenced by freeze-thaw cycles in cold region,and the mechanism of stability deterioration is not clear.In order to understand the damage and progressive failure characteristics of rock masses under the action of freezing and thawing,a model test was conducted on slope with steep joint in this study.The temperature,frost heaving pressure and deformation of slope rock mass were monitored in real-time during the test and the progressive failure mode was studied.The experimental results show that the temperature variations of cracking and the rock mass of a slope are different.There are obvious latent heat stages in the temperature-change plot in the crack,but not in the slope rock masses.The frost heaving effect in the fracture is closely related to the constraint conditions,which change with the deformation of the fracture.The frost heaving pressure fluctuates periodically during freezing and continues to decrease during thawing.The surface deformation of the rock mass increases during freezing,and the deformation is restored when it thaws.Freeze-thaw cycling results in residual deformation of the rock mass which cannot be fully restored.Analysis shows that the rock mass at the free side of the steep-dip joint rotates slightly under the frost heaving effect,causing fracture propagation.The fracture propagation pattern is a circular arc at the beginning,then extends to the possible sliding direction of the rock mass.Frost heaving force and fracture water pressure are the key factors for the failure of the slope,which can cause the crack to penetrate the rock mass,and a landslide ensues when the overall anti-sliding resistance of the rock mass is overcome.展开更多
The influence of prior austenite deformed at different temperature on the subsequent continuous cooling bainitic transformation has been investigated in an C-Ma-Cr-Ni-Mo plastic die steel. The results show that the pr...The influence of prior austenite deformed at different temperature on the subsequent continuous cooling bainitic transformation has been investigated in an C-Ma-Cr-Ni-Mo plastic die steel. The results show that the prior deformation in low temperature region of austenite retards significantly the bainitic transformation. For the same continuous cooling schedule, as austenite deformed at lower temperature, the quantity of the classical sheaf-like bainite becomes less. The present results show that severe deformation leads to mechanical stabilization of austenite and causes the difficulty of bainitic ferrite propagation into the austenite.展开更多
Great attention has been focused on super-hydrophobic surfaces due to their fantastic applications.Fluoride chemicals are widely used to fabricate super-hydrophobic surfaces due to their convenience,simplicity,and hig...Great attention has been focused on super-hydrophobic surfaces due to their fantastic applications.Fluoride chemicals are widely used to fabricate super-hydrophobic surfaces due to their convenience,simplicity,and high efficiency.Previous research has made extensively efforts on corrosion resistance of fluorinated super-hydrophobic surfaces in corrosive media.Nevertheless,rare papers focused on the underlying reasons of anticorrosion property and stability mechanism on the fluorinated super-hydrophobic coatings in alkaline solution.Therefore,this work aims to reveal these mechanisms of fluorinated super-hydrophobic copper samples in strong alkaline solution(pH 13).Through the characterization of surface wettability and surface morphology,the laser-induced super-hydrophobic surface retained excellent stability after soaking in alkaline solution for 4 h.Through measurement of chemical compositions,the anticorrosion mechanism and stability mechanism of the fluorinated super-hydrophobic surface were proposed.Importantly,the hydroxyl ion(OH−)can further promote the hydrolysis reaction to improve the density and bonding strength of the fluoride molecules.Finally,the electrochemical experiments(PDP and EIS tests)were conducted to validate the rationality of our proposed conclusions.展开更多
Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effe...Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effectively addresses the aforementioned problems;however,the impact of its quality on lithium-ion transfer and structure durability is yet to be explored.Herein,the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time.2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier.Furthermore,atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network,which is critical to the linear reduction of electrode residual stress.This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance.展开更多
The mechanism of grain fracturing in a zirconia metering nozzle used in the continuous casting process was studied. The phase composition, microstructure, and chemical composition of the residual samples were studied ...The mechanism of grain fracturing in a zirconia metering nozzle used in the continuous casting process was studied. The phase composition, microstructure, and chemical composition of the residual samples were studied using an X-ray fluorescence analyzer, scanning electron microscope, and electron probe. Results revealed that the composition, structure, and mineral phase of the original layer, transition layer, and affected layer of the metering nozzle differed because of stabilizer precipitation and steel slag permeation. The stabilizer MgO formed low-melting phases with steel slag and impure SiO2 on the boundaries（pores） of zirconia grains; consequently, grain fracturing occurred and accelerated damage to the metering nozzle was observed.展开更多
Galloping of conductor is a major hazard to safe operation of transmission lines. This paper introduces the basic galloping stability mechanism of conductor, design method of anti-galloping and the application of anti...Galloping of conductor is a major hazard to safe operation of transmission lines. This paper introduces the basic galloping stability mechanism of conductor, design method of anti-galloping and the application of anti-galloping double pendulum and integral eccentric pendulum in China. Galloping stability mechanism of conductor was established based on vertical galloping mechanism developed by Den Hartog and torsional galloping mechanism developed by O. Nigel. A design method of anti-galloping was derived and anti-galloping double pendulum and integral eccentric pendulum were developed. Applications to several transmission lines including a 500 kV transmission line of large span indicated that they have played important roles in anti-galloping.展开更多
In this work,selective laser melting(SLM)process is used to prepare the AlNi6TiZr alloy.By analyzing the printing quality and mechanical properties of the printed specimens with different process parameters,the SLM fo...In this work,selective laser melting(SLM)process is used to prepare the AlNi6TiZr alloy.By analyzing the printing quality and mechanical properties of the printed specimens with different process parameters,the SLM forming window of AlNi6TiZr is obtained.The relative density of the sample printed with 270 W-1100 mm/s(laser energy density:82 J/mm3)reaches 99.7%,exhibiting excellent mechanical properties(yield strength(YS):421.7 MPa;ultimate tensile strength(UTS):480.4 MPa).After an aging treatment of 325 ℃-12 h,the YS and UTS of the sample increased to 494 MPa and 550.7 MPa,respectively.Adding Ni,Ti,and Zr components promoted the generation of multi-phase precipitates in the Al alloy and improved the synergistic strengthening effect of multi-phases.The hard-shell structure(HSS)formed by the Al_(3)Ni phase at the grain boundary significantly strengthened the grain boundary strength.The precipitated Al_(3)(Ti,Zr)phases at the grain boundaries prevent grain growth and dislocation movement.The Al_(3)Ni and Al_(3)(Ti,Zr)phases have good thermal stability that can still maintain excellent enhancement effects at high temperature.AlNi6TiZr alloy has great application prospects in medium and high-temperature environments.展开更多
Improving the capacitance and energy density is a significant challenge while developing practical and flexible energy storage system(ESS).Redox mediators(RMs),as redox-active electrolyte additives,can provide additio...Improving the capacitance and energy density is a significant challenge while developing practical and flexible energy storage system(ESS).Redox mediators(RMs),as redox-active electrolyte additives,can provide additional energy storing capability via electrochemical faradaic contribution on electrodes for high-performance flexible ESSs.Particularly,determining effective material combinations between electrodes and RMs is essential for maximizing surface faradaic redox reactions for energy-storage performance.In this study,an electrode-RM system comprising heterostructured hybrid(carbon fiber(CF)/MnO_(2)) faradaic electrodes and iodine RMs(I-RMs) in a redox-active electrolyte is investigated.The CF/MnO_(2)with the 1-RMs(CF/MnO_(2)-I) induces dominant catalytic faradaic interaction with the I-RMs,significantly enhancing the surface faradaic kinetics and increasing the overall energy-storage performance.The CF/MnO_(2)-I ESSs show a 12.6-fold(or higher) increased volumetric energy density of 793.81 mWh L^(-1)at a current of 10 μA relative to ESSs using CF/MnO_(2)without I-RMs(CF/MnO_(2)).Moreover,the CF/MnO_(2)-I retains 93.1% of its initial capacitance after 10,000 cycles,validating the excellent cyclability.Finally,the flexibility of the ESSs is tested at different bending angles(180° to 0°),demonstrating its feasibility for flexible and high-wear environments.Therefore,CF/MnO_(2)electrodes present a practical material combination for high-performance flexible energy-storage devices owing to the catalytic faradaic interaction with I-RMs.展开更多
The search for new green and efficient stabilizers is of great importance for the stabilization of nitrocellulose(NC). This is due to the shortcomings of traditional stabilizers, such as high toxicity. In this study, ...The search for new green and efficient stabilizers is of great importance for the stabilization of nitrocellulose(NC). This is due to the shortcomings of traditional stabilizers, such as high toxicity. In this study, reduced polyaniline(r-PANI), which has a similar functional structure to diphenylamine(DPA) but is non-toxic, was prepared from PANI based on the action with N_(2)H_(4) and NH_(3)-H_(2)O, and used for the first time as a potential stabilizer for NC. XPS, FTIR, Raman, and SEM were used to characterize the reduced chemical structure and surface morphology of r-PANI. In addition, the effect of r-PANI on the stabilization of NC was characterized using DSC, VST, isothermal TG, and MMC. Thermal weight loss was reduced by 83% and 68% and gas pressure release by 75% and 49% compared to pure NC and NC&3%DPA, respectively.FTIR and XPS were used to characterize the structural changes of r-PANI before and after reaction with NO_(2). The 1535 cm^(-1) and 1341 cm^(-1) of the FTIR and the 404.98 eV and 406.05 eV of the XPS showed that the -NO_(2) was generated by the absorption of NO_(2). Furthermore, the quantum chemical calculation showed that NO_(2) was directly immobilized on r-PANI by forming -NO_(2) in the neighboring position of the benzene ring.展开更多
The ZnO quantum dots（QDs） were synthesized with improved chemical solution method.The size of the ZnO QDs is exceedingly uniform with a diameter of approximately 4.8 nm,which are homogeneously dispersed in ethanol.T...The ZnO quantum dots（QDs） were synthesized with improved chemical solution method.The size of the ZnO QDs is exceedingly uniform with a diameter of approximately 4.8 nm,which are homogeneously dispersed in ethanol.The optical absorption edge shifts from 370 nm of bulk material to 359 nm of QD materials due to the quantum size effect,while the photoluminescence peak shifts from 375 nm to 387 nm with the increase of the density of ZnO QDs.The stability of ZnO QDs was studied with different dispersion degrees at 0？C and at room temperature of 25？C.The agglomeration mechanisms and their relationship with the emission spectra were uncovered for the first time.With the ageing of Zn O QDs,the agglomeration is aggravated and the surface defects increase,which leads to the defect emission.展开更多
Evaluating the stabilized lead(Pb)-contaminated soils through sampling and laboratory testing involves costly and time-consuming processes.Therefore,this study employed a low-cost and non-destructive resistivity tool ...Evaluating the stabilized lead(Pb)-contaminated soils through sampling and laboratory testing involves costly and time-consuming processes.Therefore,this study employed a low-cost and non-destructive resistivity tool to evaluate the Pb-contaminated soils stabilized by electrolytic manganese residue(EMR)-based geopolymer(EG-OPC)from the strength and environmental benefits perspective.First,unconfined compressive strength(UCS)and leaching tests were conducted to study the stabilization effectiveness of EG-OPC.Results indicated that the UCS values of soil(5000 mg/kg of pollutants)stabilized by 20%EG-OPC were 4.87 MPa and 8.13 MPa after 7 d and 60 d of curing,respectively.After 60 d of curing,the Pb concentration in the leachate reached 44 mg/L,far lower than the control group(321 mg/L).Second,soil,pore water,and leachate resistivity(ERS,ERW,and ERL)were measured to establish fitting relationships with strength parameters and pollution risk.The good fitting results(e.g.ERS/ERW versus UCS/secant modulus(E50):correlation coefficient R2 z 0.9,ERS/ERW versus Pb contents:R2 z 0.9,and ERL versus Pb2þconcentration:R2¼0.92)and well used Archie's law(ERS versus ERW:R2>0.9)indicate that the resistivity can be used to evaluate the stabilization effectiveness.Furthermore,the microscopic results revealed two behaviors,demonstrating the reliability of resistivity:(1)with the hydration process,resistivity increases due to a denser structure and lower amounts of free water and Pb ions,and(2)the addition of Pb reduces resistivity due to its inhibition or even destructive effects on cementation and formation of hydration products.展开更多
Microbial polysaccharides,due to their unique physicochemical properties,have been shown to effec-tively enhance the stability of foam fracturing fluids.However,the combined application of microbial polysaccharides an...Microbial polysaccharides,due to their unique physicochemical properties,have been shown to effec-tively enhance the stability of foam fracturing fluids.However,the combined application of microbial polysaccharides and surfactants under high-temperature and high-salinity conditions remain poorly understood.In this study,we innovatively investigate this problem with a particular focus on foam stabilization mechanisms.By employing the Waring blender method,the optimal surfactant-microbial polysaccharide blends are identified,and the foam stability,rheological properties,and decay behavior in different systems under varying conditions are systematically analyzed for the first time.The results reveal that microbial polysaccharides significantly enhance foam stability by improving the viscoelasticity of the liquid films,particularly under high-salinity and high-temperature conditions,leading to notable improvements in both foam stability and sand-carrying capacity.Additionally,scanning electron microscopy(SEM)is used to observe the microstructure of the foam liquid films,demonstrating that the network structure formed by the foam stabilizer within the liquid film effectively inhibits foam coarsening.The Lauryl betaine and Diutan gum blend exhibits outstanding foam stability,superior sand-carrying capacity,and minimal core damage,making(LAB+MPS04)it ideal for applications in enhanced production and reservoir stimulation of unconventional reservoirs.展开更多
Theoretically,copper–niobium(Cu-Nb)composite superconducting cavities have excellent potential for high thermal and mechanical stability.They can appropriately exploit the high-gradient surface processing recipes dev...Theoretically,copper–niobium(Cu-Nb)composite superconducting cavities have excellent potential for high thermal and mechanical stability.They can appropriately exploit the high-gradient surface processing recipes developed for the bulk niobium(Nb)cavity and the thick copper(Cu)layer’s high thermal conductivity and rigidity,thereby enhancing the operational stability of the bulk Nb cavities.This study conducted a global review of the technical approaches employed for fabricating Cu-Nb composite superconducting cavities.We explored Cu-Nb composite superconducting cavities based on two technologies at the Institute of Modern Physics,Chinese Academy of Sciences(IMP,CAS),including their manufacturing processes,radio-frequency(RF)characteristics,and mechanical performance.These cavities exhibit robust mechanical stability.First,the investigation of several 1.3 GHz single-cell elliptical cavities using the Cu-Nb composite sheets indicated that the wavy structure at the Cu-Nb interface influenced the reliable welding of the Cu-Nb composite parts.We observed the generation and trapping of magnetic flux density during the T_c crossing of Nb in cooldown process.The cooling rates during the T_c crossing of Nb exerted a substantial impact on the performance of the cavities.Furthermore,we measured and analyzed the surface resistance R_(s)attributed to the trapped magnetic flux induced by the Seebeck effect after quenching events.Second,for the first time,a low-beta bulk Nb cavity was plated with Cu on its outer surface using electroplating technology.We achieved a high peak electric field E_(pk)of~88.8 MV/m at 2 K and the unloaded quality factor Q_(0)at the E_(pk)of 88.8 MV/m exceeded 1×10^(10).This demonstrated that the electroplating Cu on the bulk Nb cavity is a practical method of developing the Cu-Nb composite superconducting cavity with superior thermal stability.The results presented here provide valuable insights for applying Cu-Nb composite superconducting cavities in superconducting accelerators with stringent operational stability requirements.展开更多
基金Funded by National Natural Science Foundation of China(Nos.51890904 and 51508090)National Key Technology R&D Program of China(No.2017YFB0309904)the National Basic Research Program of China(973 Program)(No.2015CB655100)。
文摘A series of tests were performed to investigate the macroscopic properties and the stabilization mechanism of calcium lignosulphonate modified expansive soil.Compared with natural soil,soil modified by 4%calcium lignosulphonate showed 56.5%increased 28 days unconfined compressive strength and 23.8%decreased free expansion rate.The X-ray diffraction analysis results indicate the existence of cation exchange and the reduction of montmorillonite interplanar spacing.The X-computed tomography results demonstrate that calcium lignosulphonate decreased the porosity and optimized the pore distribution.The calcium lignosulphonate also increased the stability of the suspension system according to the Zeta potential results.Moreover,the results of rheological tests show that the moderate amount of calcium lignosulphonate enhanced the yield stress and the plastic viscosity,proving the formation of a strong connection between soil particles.
基金Supported by the National Natural Science Foundation of China (20901063)Wuhan Chenguang Scheme (201050231049)the Open Research Fund of Key Laboratory for Green Chemical Process of Ministry of Education(GCP201003)
文摘The effects of the concentration of monomer, crosslinking agent, initiator, stabilizer, and the polarity of medium on the polymerization kinetics were investigated. The results show that the rate of polymerization (Rp) and conversion increased with the increase of monomer concentration from 8% to 15% (total mass); the water content in dispersion medium and the initiator 2, 2′ -azobis (isobutyronitrile) (AIBN) concentration increased as well. Rp and conversion decreases with the increase of PVP when it is low, while it increases when it is high. Moreover, PVP plays an important role in microsphere stabilization. The stabilization mechanism was investigated primarily, which involves both adsorbing mechanism and graft mechanism. Within a certain range of crosslinking degree, Rp and conversion increased with the increase of the crosslinker concentration. The effect can be ignored when crosslinker concentration is above 0.3 % (total mass), and the reason was that the monomer can hardly be diffused into the microsphere phase with a certain degree of crosslinking.
基金Project supported by the National Basic Research Program (973) of China (No. 2007CB210005)the National Natural Science Foundation of China (Nos. 50676055 and 50946052)+1 种基金the Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 200802471052)the Shanghai Rising-Star Program (No.07QA14055),China
文摘The controllable active thermo-atmosphere combustor(CATAC) has become a utilizable and effective facility because it benefits the optical diagnostics and modeling. This paper presents the modeling research of the auto-ignition and flames of the H2/N2(H2/CH4/N2,or H2/H2O2/N2) mixture on a CATAC,and shows curves varying with temperatures of auto-ignition delay,the height of the site of auto-ignition of lifted flames,and flame lift-off height. The results of auto-ignition delay and the lift-off height are compared the experimental results to validate the model. A turning point can be seen on each curve,identified with criterion temperature. It can be concluded that when the co-flow temperature is higher than the criterion temperature,the auto-ignition and lifted flame of the mixture are not stable. Conversely,below the criterion temperature,the mixture will auto-ignite in a stable fashion. Stabilization mechanisms of auto-ignition and lifted flames are analyzed in terms of the criterion temperature.
基金supported by the National Natural Science Foundation of China(51704313)the Chang Jiang Scholars Program(No.T2014152)。
文摘During the development of low or ultra-low permeability oil resources,the alternative energy supply becomes a prominent issue.In recent years,carbon dots(CDs)have drawn much attention owing to their application potential in oil fields for reducing injection pressure and augmenting oil recovery.However,carbon dots characterized of small size,high surface energy are faced with several challenges,such as self-aggregation and settling.The preparation of stably dispersed carbon dots nanofluids is the key factor to guarantee its application performance in formation.In this work,we investigated the stability of hydrophilic carbon dots(HICDs)and hydrophobic carbon dots-Tween 80(HOCDs)nanofluids.The influences of carbon dots concentration,sorts and concentration of salt ions as well as temperature on the stability of CDs were studied.The results showed that HICDs are more sensitive to sort and concentration of salt ions,while HOCDs are more sensitive to temperature.In addition,the core flooding experiments demonstrated that the pressure reduction rate of HICDs and HOCDs nanofluids can be as high as 17.88%and 26.14%,respectively.Hence,the HICDs and HOCDs nanofluids show a good application potential in the reduction of injection pressure during the development of low and ultra-low permeability oil resources.
文摘The activation of HCl by cationic Au in the presence of C2H2 is important for the construction of active Au sites and in acetylene hydrochlorination.Here,we report a strategy for activating HCl by the Au-based supported ionic liquid phase(Au–SILP)technology with the[N(CN)2^–]anion.This strategy enables HCl to accept electrons from[N(CN)2^–]anions in Au–[N(CN)2^–]complexes rather than from pure[Bmim][N(CN)2],leading to notable improvement in both the reaction path and the stability of the catalyst without changing the reaction triggered by acetylene adsorption.Furthermore,the induction period of the Au–SILP catalyst was shown to be absent in the reaction process due to the high Au(III)content in the Au(Ⅲ)/Au(Ⅰ)site and the high substrate diffusion rate in the ionic liquid layer.This work provides a facile method to improve the stability of Au-based catalysts for acetylene hydrochlorination.
基金the supports from the National Natural Science Foundation of China(Grant Nos.42177163 and 42307232)the China Postdoctoral Science Foundation of China(Grant No.2022M723347).
文摘The remediation of lead-contaminated dredged sediments(LDS)presents significant environmental challenges.This study investigates the solidification/stabilization(S/S)mechanisms of ordinary Portland cement(OPC)modified with nano-silica(NS)across a continuum from nanoscale interactions to macroscopic performance.For this,a series of macroscopic experiments was conducted to evaluate the mechanical performance and lead-encapsulation efficiency,including unconfined compressive strength(UCS)and toxicity characteristic leaching procedure(TCLP).Microstructural and phase transformations were characterized using X-ray diffraction,thermogravimetric analysis,and scanning electron microscope.Molecular dynamics simulations revealed the interactions between NS-modified cement,calcium silicate hydrates(C-S-H)gel,and Illite,focusing on interaction energies,atomic density distributions and structural changes.Macroscopic analyses demonstrated that increasing NS content from 0%to 8%improved Pb-immobilization rate from 88.7%to 97.6%and enhanced UCS from 764 kPa to 1358 kPa.These improvements were attributed to NS enhancing the microstructural integrity of C-S-H gel and filling pores in samples.Nanoscale simulations elucidated that Pb-stabilization occurs through coordination bonds with oxygen atoms in the C-S-H silicon chains and on Illite surfaces,complemented by the formation of stable Pb_(3)(CO)_(3)(OH)_(2)precipitates.Additionally,the simulations revealed that Ca^(2+)migration from hydration products to mineral surfaces generated substantial repulsive interaction energies,reducing Illite layer dispersion.However,the presence of Pb impeded further Ca^(2+)migration,leading to expansion of the C-S-H gel,which collectively degraded the mechanical properties of the material.Furthermore,wet-dry and freeze-thaw cycles showed that after 10 cycles,UCS and TCLP results still met the United States Environmental Protection Agency standards,confirming long-term durability.This study provides a theoretical foundation for resource utilization of the contaminated sediments and offers a perspective for design of the cement-based curing agents,particularly in addressing variations in pollutant concentrations and environmental conditions,advancing the application of responsive and controlled release curing agents.
基金the support by the Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang(2019R01006)the National Natural Science Foundation of China(NSFC:12205252)+3 种基金A Project Supported by Scientific Research Fund of Zhejiang Provincial Education Department(Y202250795)the Research Funds of Institute of Zhejiang University-Quzhou,the Basic Public Welfare Research Special Project of Zhejiang Province(LZY22B040001)the Science and Technology Project of Quzhou Research Institute,Zhejiang University(IZQ2021KJ2032)the Independent Scientific Research Project of Quzhou Research Institute,Zhejiang University(IZQ2021RCZX007)。
文摘Li-metal batteries(LMBs)regain research prominence owing to the ever-increasing high-energy requirements.Commercially available carbonate electrolytes exhibit unfavourable parasitic reactions with Limetal anode(LMA),leading to the formation of unstable solid electrolyte interphase(SEI)and the breed of Li dendrites/dead Li.Significantly,lithium nitrate(LiNO_(3)),an excellent film-forming additive,proves crucial to construct a robust Li_(3)N/Li_(2)O/Li_(x)NO_(y)-rich SEI after combining with ether-based electrolytes.Thus,the given challenge leads to natural ideas which suggest the incorporation of LiNO_(3) into commercial carbonate for practical LMBs.Regrettably,LiNO_(3) demonstrates limited solubility(~800 ppm)in commercial carbonate electrolytes.Thence,developing stable SEI and dendrite-free LMA with the incorporation of LiNO_(3) into carbonate electrolytes is an efficacious strategy to realize robust LMBs via a scalable and cost-effective route.Therefore,this review unravels the grievances between LMA,LiNO_(3)and carbonate electrolytes,and enables a comprehensive analysis of LMA stabilizing mechanism with LiNO_(3),dissolution principle of LiNO_(3) in carbonate electrolytes,and LiNO_(3) introduction strategies.This review converges attention on a point that the LiNO_(3)-introduction into commercial carbonate electrolytes is an imperious choice to realize practical LMBs with commercial 4 V layered cathode.
基金supported by the National Natural Science Foundation of China(Project No.52179110,41877280 and 51309025)the Fundamental Research Funds for Central Public Welfare Research Institutes(CKSF 2019180/YT)the Research Funding of Wuhan Polytechnic University(NO.2021RZ028)。
文摘The stability of slope rock masses is influenced by freeze-thaw cycles in cold region,and the mechanism of stability deterioration is not clear.In order to understand the damage and progressive failure characteristics of rock masses under the action of freezing and thawing,a model test was conducted on slope with steep joint in this study.The temperature,frost heaving pressure and deformation of slope rock mass were monitored in real-time during the test and the progressive failure mode was studied.The experimental results show that the temperature variations of cracking and the rock mass of a slope are different.There are obvious latent heat stages in the temperature-change plot in the crack,but not in the slope rock masses.The frost heaving effect in the fracture is closely related to the constraint conditions,which change with the deformation of the fracture.The frost heaving pressure fluctuates periodically during freezing and continues to decrease during thawing.The surface deformation of the rock mass increases during freezing,and the deformation is restored when it thaws.Freeze-thaw cycling results in residual deformation of the rock mass which cannot be fully restored.Analysis shows that the rock mass at the free side of the steep-dip joint rotates slightly under the frost heaving effect,causing fracture propagation.The fracture propagation pattern is a circular arc at the beginning,then extends to the possible sliding direction of the rock mass.Frost heaving force and fracture water pressure are the key factors for the failure of the slope,which can cause the crack to penetrate the rock mass,and a landslide ensues when the overall anti-sliding resistance of the rock mass is overcome.
文摘The influence of prior austenite deformed at different temperature on the subsequent continuous cooling bainitic transformation has been investigated in an C-Ma-Cr-Ni-Mo plastic die steel. The results show that the prior deformation in low temperature region of austenite retards significantly the bainitic transformation. For the same continuous cooling schedule, as austenite deformed at lower temperature, the quantity of the classical sheaf-like bainite becomes less. The present results show that severe deformation leads to mechanical stabilization of austenite and causes the difficulty of bainitic ferrite propagation into the austenite.
基金supported by the National Key Research and Development Program of China(2017YFB1104700)National Postdoctoral Program for Innovative Talents(BX20190233)+1 种基金Tianjin Natural Science Foundation(19JCQNJC03900)the National Natural Science Foundations of China(51675371,51675376,and 51675367).
文摘Great attention has been focused on super-hydrophobic surfaces due to their fantastic applications.Fluoride chemicals are widely used to fabricate super-hydrophobic surfaces due to their convenience,simplicity,and high efficiency.Previous research has made extensively efforts on corrosion resistance of fluorinated super-hydrophobic surfaces in corrosive media.Nevertheless,rare papers focused on the underlying reasons of anticorrosion property and stability mechanism on the fluorinated super-hydrophobic coatings in alkaline solution.Therefore,this work aims to reveal these mechanisms of fluorinated super-hydrophobic copper samples in strong alkaline solution(pH 13).Through the characterization of surface wettability and surface morphology,the laser-induced super-hydrophobic surface retained excellent stability after soaking in alkaline solution for 4 h.Through measurement of chemical compositions,the anticorrosion mechanism and stability mechanism of the fluorinated super-hydrophobic surface were proposed.Importantly,the hydroxyl ion(OH−)can further promote the hydrolysis reaction to improve the density and bonding strength of the fluoride molecules.Finally,the electrochemical experiments(PDP and EIS tests)were conducted to validate the rationality of our proposed conclusions.
基金the National Natural Science Foundation of China(Nos.22209095 and 22238004).
文摘Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effectively addresses the aforementioned problems;however,the impact of its quality on lithium-ion transfer and structure durability is yet to be explored.Herein,the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time.2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier.Furthermore,atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network,which is critical to the linear reduction of electrode residual stress.This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance.
基金funded by the National Natural Science Foundation of China(51372193)the Natural Science Basic Research Plan in the Shaanxi Province of China(2014JM6224)
文摘The mechanism of grain fracturing in a zirconia metering nozzle used in the continuous casting process was studied. The phase composition, microstructure, and chemical composition of the residual samples were studied using an X-ray fluorescence analyzer, scanning electron microscope, and electron probe. Results revealed that the composition, structure, and mineral phase of the original layer, transition layer, and affected layer of the metering nozzle differed because of stabilizer precipitation and steel slag permeation. The stabilizer MgO formed low-melting phases with steel slag and impure SiO2 on the boundaries（pores） of zirconia grains; consequently, grain fracturing occurred and accelerated damage to the metering nozzle was observed.
文摘Galloping of conductor is a major hazard to safe operation of transmission lines. This paper introduces the basic galloping stability mechanism of conductor, design method of anti-galloping and the application of anti-galloping double pendulum and integral eccentric pendulum in China. Galloping stability mechanism of conductor was established based on vertical galloping mechanism developed by Den Hartog and torsional galloping mechanism developed by O. Nigel. A design method of anti-galloping was derived and anti-galloping double pendulum and integral eccentric pendulum were developed. Applications to several transmission lines including a 500 kV transmission line of large span indicated that they have played important roles in anti-galloping.
基金Post Graduate Innovation Funding Project of Hebei Province(No.CXZZSS2023041)Hebei Natural Science Foundation of China(No.E2021203138)Special Project for Local Science and Technology Development Guided by the Central Government of Hebei Province(236Z1805G).
文摘In this work,selective laser melting(SLM)process is used to prepare the AlNi6TiZr alloy.By analyzing the printing quality and mechanical properties of the printed specimens with different process parameters,the SLM forming window of AlNi6TiZr is obtained.The relative density of the sample printed with 270 W-1100 mm/s(laser energy density:82 J/mm3)reaches 99.7%,exhibiting excellent mechanical properties(yield strength(YS):421.7 MPa;ultimate tensile strength(UTS):480.4 MPa).After an aging treatment of 325 ℃-12 h,the YS and UTS of the sample increased to 494 MPa and 550.7 MPa,respectively.Adding Ni,Ti,and Zr components promoted the generation of multi-phase precipitates in the Al alloy and improved the synergistic strengthening effect of multi-phases.The hard-shell structure(HSS)formed by the Al_(3)Ni phase at the grain boundary significantly strengthened the grain boundary strength.The precipitated Al_(3)(Ti,Zr)phases at the grain boundaries prevent grain growth and dislocation movement.The Al_(3)Ni and Al_(3)(Ti,Zr)phases have good thermal stability that can still maintain excellent enhancement effects at high temperature.AlNi6TiZr alloy has great application prospects in medium and high-temperature environments.
基金supported by the National Research Foundation of Korea grant funded by the Korean government (MSIT)(2020R1A2C1101039)the Commercializations Promotion Agency for R&D Outcomes (COMPA) grant funded by the Korea government(MSIT)(2021E200)+1 种基金supported by“Regional Innovation Strategy (RIS)” through the National Research Foundation of Korea (NRF) funded by the Ministry of Education(MOE)(2021RIS-004)supported by the Soonchunhyang University Research Fund。
文摘Improving the capacitance and energy density is a significant challenge while developing practical and flexible energy storage system(ESS).Redox mediators(RMs),as redox-active electrolyte additives,can provide additional energy storing capability via electrochemical faradaic contribution on electrodes for high-performance flexible ESSs.Particularly,determining effective material combinations between electrodes and RMs is essential for maximizing surface faradaic redox reactions for energy-storage performance.In this study,an electrode-RM system comprising heterostructured hybrid(carbon fiber(CF)/MnO_(2)) faradaic electrodes and iodine RMs(I-RMs) in a redox-active electrolyte is investigated.The CF/MnO_(2)with the 1-RMs(CF/MnO_(2)-I) induces dominant catalytic faradaic interaction with the I-RMs,significantly enhancing the surface faradaic kinetics and increasing the overall energy-storage performance.The CF/MnO_(2)-I ESSs show a 12.6-fold(or higher) increased volumetric energy density of 793.81 mWh L^(-1)at a current of 10 μA relative to ESSs using CF/MnO_(2)without I-RMs(CF/MnO_(2)).Moreover,the CF/MnO_(2)-I retains 93.1% of its initial capacitance after 10,000 cycles,validating the excellent cyclability.Finally,the flexibility of the ESSs is tested at different bending angles(180° to 0°),demonstrating its feasibility for flexible and high-wear environments.Therefore,CF/MnO_(2)electrodes present a practical material combination for high-performance flexible energy-storage devices owing to the catalytic faradaic interaction with I-RMs.
基金supported by the National Natural Science Foundation of China(Grant No.22305123)。
文摘The search for new green and efficient stabilizers is of great importance for the stabilization of nitrocellulose(NC). This is due to the shortcomings of traditional stabilizers, such as high toxicity. In this study, reduced polyaniline(r-PANI), which has a similar functional structure to diphenylamine(DPA) but is non-toxic, was prepared from PANI based on the action with N_(2)H_(4) and NH_(3)-H_(2)O, and used for the first time as a potential stabilizer for NC. XPS, FTIR, Raman, and SEM were used to characterize the reduced chemical structure and surface morphology of r-PANI. In addition, the effect of r-PANI on the stabilization of NC was characterized using DSC, VST, isothermal TG, and MMC. Thermal weight loss was reduced by 83% and 68% and gas pressure release by 75% and 49% compared to pure NC and NC&3%DPA, respectively.FTIR and XPS were used to characterize the structural changes of r-PANI before and after reaction with NO_(2). The 1535 cm^(-1) and 1341 cm^(-1) of the FTIR and the 404.98 eV and 406.05 eV of the XPS showed that the -NO_(2) was generated by the absorption of NO_(2). Furthermore, the quantum chemical calculation showed that NO_(2) was directly immobilized on r-PANI by forming -NO_(2) in the neighboring position of the benzene ring.
基金Project supported by the FRFCU(Grant No.2016JBM066)863 Program(Grant No.2013AA032205)+1 种基金the National Natural Science Foundation of China(Grant Nos.61575019,51272022,and 11474018)RFDP(Grant Nos.20120009130005 and 20130009130001)
文摘The ZnO quantum dots（QDs） were synthesized with improved chemical solution method.The size of the ZnO QDs is exceedingly uniform with a diameter of approximately 4.8 nm,which are homogeneously dispersed in ethanol.The optical absorption edge shifts from 370 nm of bulk material to 359 nm of QD materials due to the quantum size effect,while the photoluminescence peak shifts from 375 nm to 387 nm with the increase of the density of ZnO QDs.The stability of ZnO QDs was studied with different dispersion degrees at 0？C and at room temperature of 25？C.The agglomeration mechanisms and their relationship with the emission spectra were uncovered for the first time.With the ageing of Zn O QDs,the agglomeration is aggravated and the surface defects increase,which leads to the defect emission.
基金supported by the National Key R&D Program of China(Grant No.2022YFC3901204)the Foundation for Distinguished Young Scholars of Hubei Province,China(Grant No.2021CFA096)the National Natural Science Foundation of China(Grant No.U20A20320).
文摘Evaluating the stabilized lead(Pb)-contaminated soils through sampling and laboratory testing involves costly and time-consuming processes.Therefore,this study employed a low-cost and non-destructive resistivity tool to evaluate the Pb-contaminated soils stabilized by electrolytic manganese residue(EMR)-based geopolymer(EG-OPC)from the strength and environmental benefits perspective.First,unconfined compressive strength(UCS)and leaching tests were conducted to study the stabilization effectiveness of EG-OPC.Results indicated that the UCS values of soil(5000 mg/kg of pollutants)stabilized by 20%EG-OPC were 4.87 MPa and 8.13 MPa after 7 d and 60 d of curing,respectively.After 60 d of curing,the Pb concentration in the leachate reached 44 mg/L,far lower than the control group(321 mg/L).Second,soil,pore water,and leachate resistivity(ERS,ERW,and ERL)were measured to establish fitting relationships with strength parameters and pollution risk.The good fitting results(e.g.ERS/ERW versus UCS/secant modulus(E50):correlation coefficient R2 z 0.9,ERS/ERW versus Pb contents:R2 z 0.9,and ERL versus Pb2þconcentration:R2¼0.92)and well used Archie's law(ERS versus ERW:R2>0.9)indicate that the resistivity can be used to evaluate the stabilization effectiveness.Furthermore,the microscopic results revealed two behaviors,demonstrating the reliability of resistivity:(1)with the hydration process,resistivity increases due to a denser structure and lower amounts of free water and Pb ions,and(2)the addition of Pb reduces resistivity due to its inhibition or even destructive effects on cementation and formation of hydration products.
基金supported by the Key Technology Research on Increasing Recovery Rate in Tight Sandstone Gas Reservoirs,a Major Scientific and Technological Special Project of China National Petroleum Corporation(Project No.2023ZZ25).
文摘Microbial polysaccharides,due to their unique physicochemical properties,have been shown to effec-tively enhance the stability of foam fracturing fluids.However,the combined application of microbial polysaccharides and surfactants under high-temperature and high-salinity conditions remain poorly understood.In this study,we innovatively investigate this problem with a particular focus on foam stabilization mechanisms.By employing the Waring blender method,the optimal surfactant-microbial polysaccharide blends are identified,and the foam stability,rheological properties,and decay behavior in different systems under varying conditions are systematically analyzed for the first time.The results reveal that microbial polysaccharides significantly enhance foam stability by improving the viscoelasticity of the liquid films,particularly under high-salinity and high-temperature conditions,leading to notable improvements in both foam stability and sand-carrying capacity.Additionally,scanning electron microscopy(SEM)is used to observe the microstructure of the foam liquid films,demonstrating that the network structure formed by the foam stabilizer within the liquid film effectively inhibits foam coarsening.The Lauryl betaine and Diutan gum blend exhibits outstanding foam stability,superior sand-carrying capacity,and minimal core damage,making(LAB+MPS04)it ideal for applications in enhanced production and reservoir stimulation of unconventional reservoirs.
基金supported by the Large Research Infrastructures China initiative Accelerator Driven System(No.2017-000052-75-01-000590)the Youth Innovation Promotion Association of Chinese Academy of Sciences(No.2022422)+1 种基金the Young Scientists of National Natural Science Foundation of China(No.12005275)the Advanced Energy Science and Technology Guangdong Laboratory(No.HND22PTZZYY)。
文摘Theoretically,copper–niobium(Cu-Nb)composite superconducting cavities have excellent potential for high thermal and mechanical stability.They can appropriately exploit the high-gradient surface processing recipes developed for the bulk niobium(Nb)cavity and the thick copper(Cu)layer’s high thermal conductivity and rigidity,thereby enhancing the operational stability of the bulk Nb cavities.This study conducted a global review of the technical approaches employed for fabricating Cu-Nb composite superconducting cavities.We explored Cu-Nb composite superconducting cavities based on two technologies at the Institute of Modern Physics,Chinese Academy of Sciences(IMP,CAS),including their manufacturing processes,radio-frequency(RF)characteristics,and mechanical performance.These cavities exhibit robust mechanical stability.First,the investigation of several 1.3 GHz single-cell elliptical cavities using the Cu-Nb composite sheets indicated that the wavy structure at the Cu-Nb interface influenced the reliable welding of the Cu-Nb composite parts.We observed the generation and trapping of magnetic flux density during the T_c crossing of Nb in cooldown process.The cooling rates during the T_c crossing of Nb exerted a substantial impact on the performance of the cavities.Furthermore,we measured and analyzed the surface resistance R_(s)attributed to the trapped magnetic flux induced by the Seebeck effect after quenching events.Second,for the first time,a low-beta bulk Nb cavity was plated with Cu on its outer surface using electroplating technology.We achieved a high peak electric field E_(pk)of~88.8 MV/m at 2 K and the unloaded quality factor Q_(0)at the E_(pk)of 88.8 MV/m exceeded 1×10^(10).This demonstrated that the electroplating Cu on the bulk Nb cavity is a practical method of developing the Cu-Nb composite superconducting cavity with superior thermal stability.The results presented here provide valuable insights for applying Cu-Nb composite superconducting cavities in superconducting accelerators with stringent operational stability requirements.
