选用双钙钛矿结构Sr_2FeMoO6-δ作为固体氧化物电解池的阴极材料,经过压制成型和烧结制备成阴极。利用阿基米德法测定了阴极的孔隙率,结合扫描电子显微镜研究造孔剂的用量对阴极孔隙结构的影响。利用热分析仪测定了不同孔隙结构的阴极...选用双钙钛矿结构Sr_2FeMoO6-δ作为固体氧化物电解池的阴极材料,经过压制成型和烧结制备成阴极。利用阿基米德法测定了阴极的孔隙率,结合扫描电子显微镜研究造孔剂的用量对阴极孔隙结构的影响。利用热分析仪测定了不同孔隙结构的阴极受热后热膨胀情况和热膨胀系数,研究其与电解质的热膨胀系数匹配情况。最后利用电化学工作站测试了阴极材料的电化学性能。实验结果表明,双钙钛矿结构Sr2Fe Mo O6-δ有较好地电化学性能以及与电解质LSGM热膨胀系数匹配,有望成为固体氧化物电解池阴极的理想候选材料。展开更多
选择具有双钙钛矿结构的Sr2Fe Nb O6(SFN)及La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM)材料混合作为固体氧化物电解池(SOEC)的阴极,在SFN-LSGM中掺杂不同比例的淀粉,经过干压成型并在1400℃下烧结后得到测试样。利用真实密度仪及阿基米德法测定...选择具有双钙钛矿结构的Sr2Fe Nb O6(SFN)及La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM)材料混合作为固体氧化物电解池(SOEC)的阴极,在SFN-LSGM中掺杂不同比例的淀粉,经过干压成型并在1400℃下烧结后得到测试样。利用真实密度仪及阿基米德法测定了样品的孔隙率;利用热分析仪测定了不同孔隙率的样品在35~1400℃条件下的热膨胀系数,研究该材料与常用SOEC电解质材料La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM)的热匹配性能;之后利用电化学工作站测试了该材料在纯氢气气氛下电导率与孔隙率的关系。结果表明,样品孔隙率与淀粉掺杂量成正比,孔隙率对该材料热膨胀系数影响不大,且该材料与LSGM电解池热匹配性能良好。另外,当样品孔隙率增加时,该材料在850℃纯氢气气氛下的电导率在18%孔隙率时达到最大值。展开更多
Development of active iron based water oxidation for designing an ideal artificial photosynthesis devices operating under benign neutral pH is highly demanded. We investigated the electrocatalytic activity of Ruddlesd...Development of active iron based water oxidation for designing an ideal artificial photosynthesis devices operating under benign neutral pH is highly demanded. We investigated the electrocatalytic activity of Ruddlesden-Pop-per-type strontium ferrite (Sr3Fe2O7) toward the oxygen evolution reaction (OER). Owing to the temperature-dependent efficiency of the charge disproportionation of Fe4+, the OER activity of Sr3Fe2O7 varied with the temperature, and the onset potential for the OER at a neutral pH underwent a negative shift of approximately 200 mV by increasing the temperature for the stabilization of Fe4+. When metal substitution was made to Sr3Fe2O7 for stabilizing Fe4+ at room temperature, the temperature dependence of the OER activity disappeared and the OER was driven at a small overpotential without increasing the temperature, indicating that the stabilization of Fe4+ is substantially important for achieving high OER activity.展开更多
We investigate the electronic structure and magnetic properties of layered compound Sr_(3)Fe_(2)O_(5) based on firstprinciples calculations in the framework of density functional theory with GGA+U method.Under high pr...We investigate the electronic structure and magnetic properties of layered compound Sr_(3)Fe_(2)O_(5) based on firstprinciples calculations in the framework of density functional theory with GGA+U method.Under high pressure,the ladder-type layered structure of Sr_(3)Fe_(2)O_(5) is transformed into the infinite layered structure accompanied by a transition from G-type anti-ferromagnetic(AFM)insulator to ferromagnetic(FM)metal and a spin transition from S=2 to S=1.We reproduce these transformations in our calculations and give a clear physical interpretation.展开更多
The superconducting properties of polycrystalline Sr0.6K0.4Fe2As2 were strongly influenced by Ag doping(Supercond.Sci.Technol.23(2010) 025027).Ag addition is mainly dominated by silver diffusing,so the annealing proce...The superconducting properties of polycrystalline Sr0.6K0.4Fe2As2 were strongly influenced by Ag doping(Supercond.Sci.Technol.23(2010) 025027).Ag addition is mainly dominated by silver diffusing,so the annealing process is one of the essential factors to achieve high quality Ag doped Sr0.6K0.4Fe2As2.In this paper,the optimal annealing conditions were studied for Ag doped Sr0.6K0.4Fe2As2 bulks prepared by a one-step solid reaction method.It is found that the annealing temperature has a strong influence on the superconducting properties,especially on the critical current density Jc.As a result,higher heat treatment temperature(~900℃) is helpful in diffusing Ag and reducing the impurity phase gathered together to improve the grain connectivity.In contrast,low-temperature sintering is counterproductive for Ag doped samples.These results clearly suggest that annealing at ~900℃ is necessary for obtaining high Jc Ag-doped samples.展开更多
文摘选用双钙钛矿结构Sr_2FeMoO6-δ作为固体氧化物电解池的阴极材料,经过压制成型和烧结制备成阴极。利用阿基米德法测定了阴极的孔隙率,结合扫描电子显微镜研究造孔剂的用量对阴极孔隙结构的影响。利用热分析仪测定了不同孔隙结构的阴极受热后热膨胀情况和热膨胀系数,研究其与电解质的热膨胀系数匹配情况。最后利用电化学工作站测试了阴极材料的电化学性能。实验结果表明,双钙钛矿结构Sr2Fe Mo O6-δ有较好地电化学性能以及与电解质LSGM热膨胀系数匹配,有望成为固体氧化物电解池阴极的理想候选材料。
文摘选择具有双钙钛矿结构的Sr2Fe Nb O6(SFN)及La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM)材料混合作为固体氧化物电解池(SOEC)的阴极,在SFN-LSGM中掺杂不同比例的淀粉,经过干压成型并在1400℃下烧结后得到测试样。利用真实密度仪及阿基米德法测定了样品的孔隙率;利用热分析仪测定了不同孔隙率的样品在35~1400℃条件下的热膨胀系数,研究该材料与常用SOEC电解质材料La0.9Sr0.1Ga0.8Mg0.2O3-δ(LSGM)的热匹配性能;之后利用电化学工作站测试了该材料在纯氢气气氛下电导率与孔隙率的关系。结果表明,样品孔隙率与淀粉掺杂量成正比,孔隙率对该材料热膨胀系数影响不大,且该材料与LSGM电解池热匹配性能良好。另外,当样品孔隙率增加时,该材料在850℃纯氢气气氛下的电导率在18%孔隙率时达到最大值。
文摘Development of active iron based water oxidation for designing an ideal artificial photosynthesis devices operating under benign neutral pH is highly demanded. We investigated the electrocatalytic activity of Ruddlesden-Pop-per-type strontium ferrite (Sr3Fe2O7) toward the oxygen evolution reaction (OER). Owing to the temperature-dependent efficiency of the charge disproportionation of Fe4+, the OER activity of Sr3Fe2O7 varied with the temperature, and the onset potential for the OER at a neutral pH underwent a negative shift of approximately 200 mV by increasing the temperature for the stabilization of Fe4+. When metal substitution was made to Sr3Fe2O7 for stabilizing Fe4+ at room temperature, the temperature dependence of the OER activity disappeared and the OER was driven at a small overpotential without increasing the temperature, indicating that the stabilization of Fe4+ is substantially important for achieving high OER activity.
基金Project supported by the National Natural Science Foundation of China(Grant No.11964039)Xinjiang“Hundred Young Doctors Introduction Program”Project,China(Grant No.3010010111).
文摘We investigate the electronic structure and magnetic properties of layered compound Sr_(3)Fe_(2)O_(5) based on firstprinciples calculations in the framework of density functional theory with GGA+U method.Under high pressure,the ladder-type layered structure of Sr_(3)Fe_(2)O_(5) is transformed into the infinite layered structure accompanied by a transition from G-type anti-ferromagnetic(AFM)insulator to ferromagnetic(FM)metal and a spin transition from S=2 to S=1.We reproduce these transformations in our calculations and give a clear physical interpretation.
基金supported by the Beijing Municipal Science and Technology Commission (Grant No. Z09010300820907)the National Natural Science Foundation of China (Grant No. 50802093)the National Basic Research Program of China (Grant No. 2006CB601004)
文摘The superconducting properties of polycrystalline Sr0.6K0.4Fe2As2 were strongly influenced by Ag doping(Supercond.Sci.Technol.23(2010) 025027).Ag addition is mainly dominated by silver diffusing,so the annealing process is one of the essential factors to achieve high quality Ag doped Sr0.6K0.4Fe2As2.In this paper,the optimal annealing conditions were studied for Ag doped Sr0.6K0.4Fe2As2 bulks prepared by a one-step solid reaction method.It is found that the annealing temperature has a strong influence on the superconducting properties,especially on the critical current density Jc.As a result,higher heat treatment temperature(~900℃) is helpful in diffusing Ag and reducing the impurity phase gathered together to improve the grain connectivity.In contrast,low-temperature sintering is counterproductive for Ag doped samples.These results clearly suggest that annealing at ~900℃ is necessary for obtaining high Jc Ag-doped samples.
