The EHL-2 spherical torus is designed to demonstrate proton-boron(p-11B)fusion within a compact spherical tokamak.Its planned heating system includes a negative ion-based neutral beam injection(N-NBI),two positive ion...The EHL-2 spherical torus is designed to demonstrate proton-boron(p-11B)fusion within a compact spherical tokamak.Its planned heating system includes a negative ion-based neutral beam injection(N-NBI),two positive ion-based NBI systems(P-NBI),electron cyclotron resonance heating(ECRH),ion cyclotron resonance heating(ICRH),and high harmonic fast wave(HHFW),with a total power output of 31 MW.According to scaling law estimates,the device is capable of achieving H-mode operation.The plasma density,,n_(e,min)at the minimum L-H power threshold,P_(lh),is estimated to be 4.4×10^(19)m^(-3).The pedestal parameters were calculated using the REPED model.Assuming B as the primary impurity ion,the predicted pedestal width and height are lower compared to the typical case with carbon impurities.The pedestal collisionality for EHL-2 is estimated to range between 0.06 and 0.17,indicating the potential for significant energy loss due to edge localized modes(ELMs).The heat flux on the divertor plate has been calculated using the JOREK code.The peak heat fluxes during ELM bursts are approximately 31.0 MW/m^(2)at the lower inboard target and 39.5 MW/m^(2)at the lower outboard target.A preliminary design of the resonant magnetic perturbation(RMP)coils has been completed to both control type-I ELMs and correct error fields.The system comprises 16 coils arranged into 24 pairs.In ELM control mode,a 14/2 component is generated at 1.7 G/kAt,with a current of 4.9 kA required to achieveσChirikow=1 at the resonant surface,where the normalized poloidal magnetic flux is 0.85.In error field(EF)modulation mode,2/1 and 3/1 components are generated at 3.5 G/kAt and 2.8 G/kAt,respectively.展开更多
EHL-2 is an ENN second-generation device aimed at studying proton-boron(p-11B)fusion reactions in a spherical torus.The design parameters are Ti0~30 keV,Ti/Te>2,n_(e0)~1×10^(20)m^(-3),I_(p)~3 MA,B_(t)~3 T,and...EHL-2 is an ENN second-generation device aimed at studying proton-boron(p-11B)fusion reactions in a spherical torus.The design parameters are Ti0~30 keV,Ti/Te>2,n_(e0)~1×10^(20)m^(-3),I_(p)~3 MA,B_(t)~3 T,andτ_(E)~0.5 s.High ion temperature is one of the standard operation scenarios of EHL-2,aiming to reduce bremsstrahlung radiation while enhancing plasma parameters by elevating the ion to electron temperature ratio.In order to achieve high ion temperature,neutral beam injection is considered the primary heating method during the flat-top phase.The neutral beam system for EHL-2 comprises 3-5 beams with energy/power ranging from 60 keV/4 MW,80-100 keV/10 MW,to 200 keV/3 MW.This work conducts predictive analysis on core transport during the flat-top phase of EHL-2’s high-ion-temperature scenario utilizing ASTRA.The study delineates the potential operating range of core temperature and other parameters given the designed heating capacity.Specifically,the study presents predictive simulations based on CDBM,GLF23,Bohm-gyro-Bohm,and IFSPPPL transport models,evaluating the steady-state power balance,energy confinement time,and impact of various parameters such as plasma density and NBI power on core ion temperature.The simulations demonstrate that the design parameters of the EHL-2 high-Ti scenario,although sensitive to varying transport models,are hopefully attainable as long as adequate ion heating and controlled ion transport levels are ensured.展开更多
ENN He Long-2(EHL-2)is the next-generation large mega-Ampere(MA)spherical torus(ST)proposed and funded by the ENN company.The design parameters are:Ti0>30 keV,n_(e0)~1×10^(20)m^(-3),Ip~3 MA,Bt~3 T.One of the b...ENN He Long-2(EHL-2)is the next-generation large mega-Ampere(MA)spherical torus(ST)proposed and funded by the ENN company.The design parameters are:Ti0>30 keV,n_(e0)~1×10^(20)m^(-3),Ip~3 MA,Bt~3 T.One of the biggest challenges of EHL-2 is how to achieve several MA current flat-tops with limited voltage-seconds(Vs)of the center solenoid(CS)coils.In order to minimize the consumption of Vs,a fully non-inductive start-up by electron cyclotron resonance heating(ECRH)will be applied in EHL-2.The ramp-up phase will be accomplished with the synergetic mode between the CS and non-inductive methods.The strategy of non-inductive start-up and ramp-up with synergetic mode has been verified on EXL-50U’s experiments.Based on this strategy,numerical simulations indicate the feasibility of EHL-2 achieving 3 MA plasma current.A high-performance steady-state scenario with Ip~1.5 MA is also designed.In this scenario,the bootstrap current fraction fBS>70%,the safety factor q at the magnetic axis q0>2,the minimum safety factor qmin>1,the poloidal betaβp>3 and normalized betaβN>2.3.Each design iteration integrates the validation of physical models with the constraints of engineering implementation,gradually optimizing the performance of the heating and current drive(H&CD)systems.Numerical simulation results for general auxiliary H&CD systems such as neutral beam injection(NBI),electron cyclotron(EC)wave,ion cyclotron wave(ICW),and lower hybrid wave(LHW)are presented.These simulation results ensure that the 31 MW H&CD systems comprehensively cover all scenarios while maintaining engineering feasibility.展开更多
EHL-2 spherical torus(ST)is one of the key steps of p-^(11)B(proton-boron or hydrogen-boron)fusion energy research in ENN.The fusion produced energy is carried mainly by alpha particles of average energy 3 MeV,which i...EHL-2 spherical torus(ST)is one of the key steps of p-^(11)B(proton-boron or hydrogen-boron)fusion energy research in ENN.The fusion produced energy is carried mainly by alpha particles of average energy 3 MeV,which ideally can be converted to electricity with high efficiency(>80%).However,there exist serious difficulties to realize such conversion in a fusion device,due to the high energy density and high voltage required.To comprehensively describe the progress of the EHL-2 physics design,this work presents preliminary considerations of approaches for achieving energy conversion,highlighting critical issues for further investigation.Specifically,we provide an initial simulation of alpha particle extraction in the EHL-2 ST configuration as a starting point for p-^(11)B fusion energy conversion.展开更多
This paper presents the first comprehensive simulation study of p-11B fusion reactions in a spherical torus.We developed relevant program modules for fusion reactions based on energetic particle simulation frameworks ...This paper presents the first comprehensive simulation study of p-11B fusion reactions in a spherical torus.We developed relevant program modules for fusion reactions based on energetic particle simulation frameworks and analyzed the two main fusion channels:thermal and beam-thermal.Using EHL-2 design parameters with n_(boron)=007n_(ion)and a hydrogen beam at 200 keV and 1 MW,our simulation indicates that p-11B reactions produce approximately 1.5×10^(15)αparticles per second(~0.7 kW)from the thermal channel,and5.3×10^(14)(~0.25 kW)from the beam-thermal channel.We conducted parameter scans to establish a solid physics foundation for the high ion temperature conditions(T_(i)>26ke V)designed for EHL-2.This work also laid the groundwork for studying various operation modes to explore different reaction channels.The simulation results suggest that the conditions in EHL-2 could be sufficient for investigating p-11B thermonuclear reactions.In addition,we found that EHL-2 offered good confinement for energetic particles,allowing us to research the interactions between these ions and plasmas.This research enhances our understanding of burning plasma physics.展开更多
ENN is planning the next generation experimental device EHL-2 with the goal to verify the thermal reaction rates of p-^(11)B fusion,establish spherical torus/tokamak experimental scaling laws at 10’s keV ion temperat...ENN is planning the next generation experimental device EHL-2 with the goal to verify the thermal reaction rates of p-^(11)B fusion,establish spherical torus/tokamak experimental scaling laws at 10’s keV ion temperature,and provide a design basis for subsequent experiments to test and realize the p-^(11)B fusion burning plasma.Based on 0-dimensional(0-D)system design and 1.5-dimensional transport modelling analyses,the main target parameters of EHL-2 have been basically determined,including the plasma major radius,R0,of 1.05 m,the aspect ratio,A,of 1.85,the maximum central toroidal magnetic field strength,B0,of 3 T,and the plasma toroidal current,Ip,of 3 MA.The main heating system will be the neutral beam injection at a total power of 17 MW.In addition,6 MW of electron cyclotron resonance heating will serve as the main means of local current drive and MHD instabilities control.The physics design of EHL-2 is focused on addressing three main operating scenarios,i.e.,(1)high ion temperature scenario,(2)high-performance steady-state scenario and(3)high triple product scenario.Each scenario will integrate solutions to different important issues,including equilibrium configuration,heating and current drive,confinement and transport,MHD instability,p-^(11)B fusion reaction,plasma-wall interactions,etc.Beyond that,there are several unique and significant challenges to address,including●establish a plasma with extremely high core ion temperature(T_(i,0)>30 keV),and ensure a large ion-to-electron tempera-ture ratio(T_(i,0)/Te,0>2),and a boron concentration of 10%‒15%at the plasma core;●realize the start-up by non-inductive current drive and the rise of MA-level plasma toroidal current.This is because the volt-seconds that the central solenoid of the ST can provide are very limited;●achieve divertor heat and particle fluxes control including complete detachment under high P/R(>20 MW/m)at rela-tively low electron densities.This overview will introduce the advanced progress in the physics design of EHL-2.展开更多
The EXL-50U is China’s first large spherical torus device with a toroidal field reaching 1 T.The major radius of the EXL-50U ranges from 0.6 m to 0.8 m,with an aspect ratio of 1.4−1.8.The goal of plasma current in th...The EXL-50U is China’s first large spherical torus device with a toroidal field reaching 1 T.The major radius of the EXL-50U ranges from 0.6 m to 0.8 m,with an aspect ratio of 1.4−1.8.The goal of plasma current in the first experimental phase is 500 kA,and in the future second phase,the goal of plasma current is 1 MA.On the EXL-50U project,the ENN fusion team expeditiously accomplished a series of comprehensive tasks including physical and engineering design,main component construction installation,and system commissioning,all within a mere eighteen-month timeframe.In the experiments of 2024,the EXL-50U achieved a 500 kA limiter configuration discharge using ECRH(Electron Cyclotron Resonance Heating)for non-inductive current start-up and a current ramp-up with the synergetic effect of ECRH and central solenoid(CS).Preliminary divertor configuration plasmas were also obtained under 200 kA plasma current.The core ion temperature of 1 keV was achieved with low-power NBI heating,and the energy confinement time of 30 ms was reached with Ohmic heating in the flat-top phase.The current and future experiments of EXL-50U will strongly support the physical design and operational scenarios of EHL-2 in the areas of current drive,high ion temperature exploration,energy transport and confinement,and hydrogen-boron physical characteristics.At the same time,the experience in the design,construction,and commissioning of the engineering,heating,and diagnostics systems on EXL-50U is also very beneficial for enhancing the feasibility of the engineering design for EHL-2.展开更多
The electron cyclotron emission(ECE)diagnostic system has been developed on the ENN spherical torus(EXL-50).The ECE system is designed to detect radiation emitted by energetic electrons,rather than conventional 1D ele...The electron cyclotron emission(ECE)diagnostic system has been developed on the ENN spherical torus(EXL-50).The ECE system is designed to detect radiation emitted by energetic electrons,rather than conventional 1D electron temperature profile measurement,in the frequency range of 4-40 GHz.The system is composed of five subsystems,each covering a different frequency band,including the C-band(4-8 GHz),X-band(8-12 GHz),Ku-band(12-18 GHz),K-band(18-26.5 GHz)and Kα-band(26.4-40 GHz).The system uses heterodyne detection to analyze the received signals.The K-band and Kα-band subsystems are located horizontally in the equatorial plane of the EXL-50,while the C-band,X-band and Ku-band subsystems are located under the vacuum vessel of the EXL-50.To direct the microwaves from the plasma to the antennas for the horizontal detection subsystems,a quasi-optical system has been developed.For the vertical detection subsystems,the antennas are directly attached to the port located beneath the torus at R=700 mm,which is also the magnetic axis of the torus.The system integration,bench testing and initial experimental results will be thoroughly discussed,providing a comprehensive understanding of the ECE system s performance and capabilities.展开更多
The spherical torus(ST)and compact torus(CT)are two kinds of alternative magnetic confinement fusion concepts with compact geometry.The ST is actually a sub-category of tokamak with a low aspect ratio;while the CT is ...The spherical torus(ST)and compact torus(CT)are two kinds of alternative magnetic confinement fusion concepts with compact geometry.The ST is actually a sub-category of tokamak with a low aspect ratio;while the CT is a toroidal magnetic configuration with a simply-connected geometry including spheromak and field reversed pinch.The ST and CT have potential advantages for ultimate fusion reactor;while at present they can also provide unique fusion science and technology contributions for mainstream fusion research.However,some critical scientific and technology issues should be extensively investigated.展开更多
A new spherical torus called VEST （Versatile Experiment Spherical Torus） is designed, constructed and successfully commissioned at Seoul National University. A unique design feature of the VEST is two partial soleno...A new spherical torus called VEST （Versatile Experiment Spherical Torus） is designed, constructed and successfully commissioned at Seoul National University. A unique design feature of the VEST is two partial solenoid coils installed at both vertical ends of a center stack, which can provide sufficient magnetic fluxes to initiate tokamak plasmas while keeping a low aspect ratio configuration in the central region. According to initial double null merging start-up scenario using the partial solenoid coils, apprdpriate p6wer supplies for driving a toroidal field coil, outer poloidal field coils, and the partial solenoid Coils are fabricated and successfully commissioned. For reliable start-up, a pre-ionization system with two cost-effective homemade magnetron power supplies is also prepared. In addition, magnetic and spectroscopic diagnostics with appropriate data acquisition and control systems are well prepared for initial operation of the device. The VEST is ready for tokamak plasma operation by completing and commissioning most of the designed components.展开更多
According to the physics of tokamak start-up,this study constructs a zero-dimensional(0D)model applicable to electron cyclotron(EC)wave assisted start-up in NCST spherical torus(spherical tokamak)and CN-H1 stellarator...According to the physics of tokamak start-up,this study constructs a zero-dimensional(0D)model applicable to electron cyclotron(EC)wave assisted start-up in NCST spherical torus(spherical tokamak)and CN-H1 stellarators.Using the constructed 0D model,the results obtained in this study under the same conditions are compared and validated against reference results for pure hydrogen plasma start-up in tokamak.The results are in good agreement,especially regarding electron temperature,ion temperature and plasma current.In the presence of finite Ohmic electric field in the spherical tokamak,a study on the EC wave assisted start-up of the NCST plasma at frequency of 28 GHz is conducted.The impact of the vertical magnetic field B_(v)on EC wave assisted start-up,the relationship between EC wave injection power P_(inj),Ohmic electric field E,and initial hydrogen atom density n_(H0)are explored separately.It is found that under conditions of Ohmic electric field lower than ITER(~0.3 V m^(-1)),EC wave can expand the operational space to achieve better plasma parameters.Simulating the process of28 GHz EC wave start-up in the CN-H1 stellarator plasma,the plasma current in the zerodimensional model is replaced with the current in the poloidal coil of the stellarator.Plasma startup can be successfully achieved at injection powers in the hundreds of kilowatts range,resulting in electron densities on the order of 10^(17)-10^(18)m^(-3).展开更多
The magnetic fusion reactor using the advanced D-3He fuels has the advantage of much less-neutron productions so that the consequent damages to the first wall are less serious. If the establishment of this kind of rea...The magnetic fusion reactor using the advanced D-3He fuels has the advantage of much less-neutron productions so that the consequent damages to the first wall are less serious. If the establishment of this kind of reactor becomes realistic, the exploration of 3He on the moon will be largely motivated. Based on recent progresses in the spherical torus (ST) research, we have physically designed a D-3He fusion reactor using the extrapolated results from the ST experiments and also the present-day tokamak scaling. It is found that the reactor size significantly depends on the wall reflection coefficient of the synchrotron radiation and of the impurity contaminations. The secondary reaction between D-D that promptly leads to the D-T reaction producing 14 MeV neutrons is also estimated. Comparison of this D-3He ST reactor with the D-T reactor is made.展开更多
基金the auspices of National Natural Science Foundations of China(Nos.12075284 and 12205157)supported by the High-End Talents Program of Hebei Province,Innovative Approaches towards Development of Carbon-Free Clean Fusion Energy(No.2021HBQZYCSB006).
文摘The EHL-2 spherical torus is designed to demonstrate proton-boron(p-11B)fusion within a compact spherical tokamak.Its planned heating system includes a negative ion-based neutral beam injection(N-NBI),two positive ion-based NBI systems(P-NBI),electron cyclotron resonance heating(ECRH),ion cyclotron resonance heating(ICRH),and high harmonic fast wave(HHFW),with a total power output of 31 MW.According to scaling law estimates,the device is capable of achieving H-mode operation.The plasma density,,n_(e,min)at the minimum L-H power threshold,P_(lh),is estimated to be 4.4×10^(19)m^(-3).The pedestal parameters were calculated using the REPED model.Assuming B as the primary impurity ion,the predicted pedestal width and height are lower compared to the typical case with carbon impurities.The pedestal collisionality for EHL-2 is estimated to range between 0.06 and 0.17,indicating the potential for significant energy loss due to edge localized modes(ELMs).The heat flux on the divertor plate has been calculated using the JOREK code.The peak heat fluxes during ELM bursts are approximately 31.0 MW/m^(2)at the lower inboard target and 39.5 MW/m^(2)at the lower outboard target.A preliminary design of the resonant magnetic perturbation(RMP)coils has been completed to both control type-I ELMs and correct error fields.The system comprises 16 coils arranged into 24 pairs.In ELM control mode,a 14/2 component is generated at 1.7 G/kAt,with a current of 4.9 kA required to achieveσChirikow=1 at the resonant surface,where the normalized poloidal magnetic flux is 0.85.In error field(EF)modulation mode,2/1 and 3/1 components are generated at 3.5 G/kAt and 2.8 G/kAt,respectively.
基金supported by the ENN Group and ENN Energy Research Institutesupported by National Natural Science Foundation of China(No.12475210).
文摘EHL-2 is an ENN second-generation device aimed at studying proton-boron(p-11B)fusion reactions in a spherical torus.The design parameters are Ti0~30 keV,Ti/Te>2,n_(e0)~1×10^(20)m^(-3),I_(p)~3 MA,B_(t)~3 T,andτ_(E)~0.5 s.High ion temperature is one of the standard operation scenarios of EHL-2,aiming to reduce bremsstrahlung radiation while enhancing plasma parameters by elevating the ion to electron temperature ratio.In order to achieve high ion temperature,neutral beam injection is considered the primary heating method during the flat-top phase.The neutral beam system for EHL-2 comprises 3-5 beams with energy/power ranging from 60 keV/4 MW,80-100 keV/10 MW,to 200 keV/3 MW.This work conducts predictive analysis on core transport during the flat-top phase of EHL-2’s high-ion-temperature scenario utilizing ASTRA.The study delineates the potential operating range of core temperature and other parameters given the designed heating capacity.Specifically,the study presents predictive simulations based on CDBM,GLF23,Bohm-gyro-Bohm,and IFSPPPL transport models,evaluating the steady-state power balance,energy confinement time,and impact of various parameters such as plasma density and NBI power on core ion temperature.The simulations demonstrate that the design parameters of the EHL-2 high-Ti scenario,although sensitive to varying transport models,are hopefully attainable as long as adequate ion heating and controlled ion transport levels are ensured.
基金supported by ENN Group and ENN Energy Research Institute.The authors would like to express their gratitude for the contributions of the ENN fusion team and collaborators,such as Tiantian Sun,Haojie Ma,and Yong Guo,in supporting these endeavours.The authors also acknowledge the support of the National SuperComputer Center in Tianjin and Beijing PARATERA Tech Corp.,Ltd.,for providing HPC resources that have contributed to the research results reported in this paper.This work was partly supported by National Natural Science Fundation of China(Nos.12375215 and 12475210).
文摘ENN He Long-2(EHL-2)is the next-generation large mega-Ampere(MA)spherical torus(ST)proposed and funded by the ENN company.The design parameters are:Ti0>30 keV,n_(e0)~1×10^(20)m^(-3),Ip~3 MA,Bt~3 T.One of the biggest challenges of EHL-2 is how to achieve several MA current flat-tops with limited voltage-seconds(Vs)of the center solenoid(CS)coils.In order to minimize the consumption of Vs,a fully non-inductive start-up by electron cyclotron resonance heating(ECRH)will be applied in EHL-2.The ramp-up phase will be accomplished with the synergetic mode between the CS and non-inductive methods.The strategy of non-inductive start-up and ramp-up with synergetic mode has been verified on EXL-50U’s experiments.Based on this strategy,numerical simulations indicate the feasibility of EHL-2 achieving 3 MA plasma current.A high-performance steady-state scenario with Ip~1.5 MA is also designed.In this scenario,the bootstrap current fraction fBS>70%,the safety factor q at the magnetic axis q0>2,the minimum safety factor qmin>1,the poloidal betaβp>3 and normalized betaβN>2.3.Each design iteration integrates the validation of physical models with the constraints of engineering implementation,gradually optimizing the performance of the heating and current drive(H&CD)systems.Numerical simulation results for general auxiliary H&CD systems such as neutral beam injection(NBI),electron cyclotron(EC)wave,ion cyclotron wave(ICW),and lower hybrid wave(LHW)are presented.These simulation results ensure that the 31 MW H&CD systems comprehensively cover all scenarios while maintaining engineering feasibility.
文摘EHL-2 spherical torus(ST)is one of the key steps of p-^(11)B(proton-boron or hydrogen-boron)fusion energy research in ENN.The fusion produced energy is carried mainly by alpha particles of average energy 3 MeV,which ideally can be converted to electricity with high efficiency(>80%).However,there exist serious difficulties to realize such conversion in a fusion device,due to the high energy density and high voltage required.To comprehensively describe the progress of the EHL-2 physics design,this work presents preliminary considerations of approaches for achieving energy conversion,highlighting critical issues for further investigation.Specifically,we provide an initial simulation of alpha particle extraction in the EHL-2 ST configuration as a starting point for p-^(11)B fusion energy conversion.
基金supported by ENN Group and ENN Energy Research Institute.
文摘This paper presents the first comprehensive simulation study of p-11B fusion reactions in a spherical torus.We developed relevant program modules for fusion reactions based on energetic particle simulation frameworks and analyzed the two main fusion channels:thermal and beam-thermal.Using EHL-2 design parameters with n_(boron)=007n_(ion)and a hydrogen beam at 200 keV and 1 MW,our simulation indicates that p-11B reactions produce approximately 1.5×10^(15)αparticles per second(~0.7 kW)from the thermal channel,and5.3×10^(14)(~0.25 kW)from the beam-thermal channel.We conducted parameter scans to establish a solid physics foundation for the high ion temperature conditions(T_(i)>26ke V)designed for EHL-2.This work also laid the groundwork for studying various operation modes to explore different reaction channels.The simulation results suggest that the conditions in EHL-2 could be sufficient for investigating p-11B thermonuclear reactions.In addition,we found that EHL-2 offered good confinement for energetic particles,allowing us to research the interactions between these ions and plasmas.This research enhances our understanding of burning plasma physics.
文摘ENN is planning the next generation experimental device EHL-2 with the goal to verify the thermal reaction rates of p-^(11)B fusion,establish spherical torus/tokamak experimental scaling laws at 10’s keV ion temperature,and provide a design basis for subsequent experiments to test and realize the p-^(11)B fusion burning plasma.Based on 0-dimensional(0-D)system design and 1.5-dimensional transport modelling analyses,the main target parameters of EHL-2 have been basically determined,including the plasma major radius,R0,of 1.05 m,the aspect ratio,A,of 1.85,the maximum central toroidal magnetic field strength,B0,of 3 T,and the plasma toroidal current,Ip,of 3 MA.The main heating system will be the neutral beam injection at a total power of 17 MW.In addition,6 MW of electron cyclotron resonance heating will serve as the main means of local current drive and MHD instabilities control.The physics design of EHL-2 is focused on addressing three main operating scenarios,i.e.,(1)high ion temperature scenario,(2)high-performance steady-state scenario and(3)high triple product scenario.Each scenario will integrate solutions to different important issues,including equilibrium configuration,heating and current drive,confinement and transport,MHD instability,p-^(11)B fusion reaction,plasma-wall interactions,etc.Beyond that,there are several unique and significant challenges to address,including●establish a plasma with extremely high core ion temperature(T_(i,0)>30 keV),and ensure a large ion-to-electron tempera-ture ratio(T_(i,0)/Te,0>2),and a boron concentration of 10%‒15%at the plasma core;●realize the start-up by non-inductive current drive and the rise of MA-level plasma toroidal current.This is because the volt-seconds that the central solenoid of the ST can provide are very limited;●achieve divertor heat and particle fluxes control including complete detachment under high P/R(>20 MW/m)at rela-tively low electron densities.This overview will introduce the advanced progress in the physics design of EHL-2.
基金supported by ENN Group and ENN Energy Research Institute.
文摘The EXL-50U is China’s first large spherical torus device with a toroidal field reaching 1 T.The major radius of the EXL-50U ranges from 0.6 m to 0.8 m,with an aspect ratio of 1.4−1.8.The goal of plasma current in the first experimental phase is 500 kA,and in the future second phase,the goal of plasma current is 1 MA.On the EXL-50U project,the ENN fusion team expeditiously accomplished a series of comprehensive tasks including physical and engineering design,main component construction installation,and system commissioning,all within a mere eighteen-month timeframe.In the experiments of 2024,the EXL-50U achieved a 500 kA limiter configuration discharge using ECRH(Electron Cyclotron Resonance Heating)for non-inductive current start-up and a current ramp-up with the synergetic effect of ECRH and central solenoid(CS).Preliminary divertor configuration plasmas were also obtained under 200 kA plasma current.The core ion temperature of 1 keV was achieved with low-power NBI heating,and the energy confinement time of 30 ms was reached with Ohmic heating in the flat-top phase.The current and future experiments of EXL-50U will strongly support the physical design and operational scenarios of EHL-2 in the areas of current drive,high ion temperature exploration,energy transport and confinement,and hydrogen-boron physical characteristics.At the same time,the experience in the design,construction,and commissioning of the engineering,heating,and diagnostics systems on EXL-50U is also very beneficial for enhancing the feasibility of the engineering design for EHL-2.
基金performed under the auspices of National Natural Science Foundation of China(No.11605244)supported by the High-End Talents Program of Hebei Province,Innovative Approaches towards Development of CarbonFree Clean Fusion Energy(No.2021HBQZYCSB006)。
文摘The electron cyclotron emission(ECE)diagnostic system has been developed on the ENN spherical torus(EXL-50).The ECE system is designed to detect radiation emitted by energetic electrons,rather than conventional 1D electron temperature profile measurement,in the frequency range of 4-40 GHz.The system is composed of five subsystems,each covering a different frequency band,including the C-band(4-8 GHz),X-band(8-12 GHz),Ku-band(12-18 GHz),K-band(18-26.5 GHz)and Kα-band(26.4-40 GHz).The system uses heterodyne detection to analyze the received signals.The K-band and Kα-band subsystems are located horizontally in the equatorial plane of the EXL-50,while the C-band,X-band and Ku-band subsystems are located under the vacuum vessel of the EXL-50.To direct the microwaves from the plasma to the antennas for the horizontal detection subsystems,a quasi-optical system has been developed.For the vertical detection subsystems,the antennas are directly attached to the port located beneath the torus at R=700 mm,which is also the magnetic axis of the torus.The system integration,bench testing and initial experimental results will be thoroughly discussed,providing a comprehensive understanding of the ECE system s performance and capabilities.
基金supported by National Natural Science Foundation of China(Grant Nos.11325524 and 11261140327)Ministry of Science and Technology of China(Contract No.2013GB112001).
文摘The spherical torus(ST)and compact torus(CT)are two kinds of alternative magnetic confinement fusion concepts with compact geometry.The ST is actually a sub-category of tokamak with a low aspect ratio;while the CT is a toroidal magnetic configuration with a simply-connected geometry including spheromak and field reversed pinch.The ST and CT have potential advantages for ultimate fusion reactor;while at present they can also provide unique fusion science and technology contributions for mainstream fusion research.However,some critical scientific and technology issues should be extensively investigated.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF)funded by the Ministry of Education,Science and Technology (Contract No. 0620-20120004)the second phase of the Brain Korea 21 Program
文摘A new spherical torus called VEST （Versatile Experiment Spherical Torus） is designed, constructed and successfully commissioned at Seoul National University. A unique design feature of the VEST is two partial solenoid coils installed at both vertical ends of a center stack, which can provide sufficient magnetic fluxes to initiate tokamak plasmas while keeping a low aspect ratio configuration in the central region. According to initial double null merging start-up scenario using the partial solenoid coils, apprdpriate p6wer supplies for driving a toroidal field coil, outer poloidal field coils, and the partial solenoid Coils are fabricated and successfully commissioned. For reliable start-up, a pre-ionization system with two cost-effective homemade magnetron power supplies is also prepared. In addition, magnetic and spectroscopic diagnostics with appropriate data acquisition and control systems are well prepared for initial operation of the device. The VEST is ready for tokamak plasma operation by completing and commissioning most of the designed components.
基金supported by the National Key Research and Development Program of China(Nos.2022YFE03070000 and 2022YFE03070003)National Natural Science Foundation of China(Nos.12375220 and 12075114)。
文摘According to the physics of tokamak start-up,this study constructs a zero-dimensional(0D)model applicable to electron cyclotron(EC)wave assisted start-up in NCST spherical torus(spherical tokamak)and CN-H1 stellarators.Using the constructed 0D model,the results obtained in this study under the same conditions are compared and validated against reference results for pure hydrogen plasma start-up in tokamak.The results are in good agreement,especially regarding electron temperature,ion temperature and plasma current.In the presence of finite Ohmic electric field in the spherical tokamak,a study on the EC wave assisted start-up of the NCST plasma at frequency of 28 GHz is conducted.The impact of the vertical magnetic field B_(v)on EC wave assisted start-up,the relationship between EC wave injection power P_(inj),Ohmic electric field E,and initial hydrogen atom density n_(H0)are explored separately.It is found that under conditions of Ohmic electric field lower than ITER(~0.3 V m^(-1)),EC wave can expand the operational space to achieve better plasma parameters.Simulating the process of28 GHz EC wave start-up in the CN-H1 stellarator plasma,the plasma current in the zerodimensional model is replaced with the current in the poloidal coil of the stellarator.Plasma startup can be successfully achieved at injection powers in the hundreds of kilowatts range,resulting in electron densities on the order of 10^(17)-10^(18)m^(-3).
基金The project supported by the National Nature Science Foundation of China (No. 10375018)
文摘The magnetic fusion reactor using the advanced D-3He fuels has the advantage of much less-neutron productions so that the consequent damages to the first wall are less serious. If the establishment of this kind of reactor becomes realistic, the exploration of 3He on the moon will be largely motivated. Based on recent progresses in the spherical torus (ST) research, we have physically designed a D-3He fusion reactor using the extrapolated results from the ST experiments and also the present-day tokamak scaling. It is found that the reactor size significantly depends on the wall reflection coefficient of the synchrotron radiation and of the impurity contaminations. The secondary reaction between D-D that promptly leads to the D-T reaction producing 14 MeV neutrons is also estimated. Comparison of this D-3He ST reactor with the D-T reactor is made.
