Neodymium chromium oxide(NdCrO_(3))and NdCrO_(3)/graphene oxide(GO)nanocomposite were synthesized via sol-gel and co-precipitation techniques for being used in high-perfo rmance supercapacitors and for the possible ap...Neodymium chromium oxide(NdCrO_(3))and NdCrO_(3)/graphene oxide(GO)nanocomposite were synthesized via sol-gel and co-precipitation techniques for being used in high-perfo rmance supercapacitors and for the possible application in ultraviolet(UV)materials.Herein the systematic synthesis approach was adopted,which enhances the optical and electrical properties of the grown wide band-gap composite nanomaterial.Structural characterization of the grown materials was attempted using X-ray diffraction(XRD)and scanning electron microscopy(SEM).Most importantly the electrochemical analysis of the grown samples was carried out by employing a glassy carbon electrode and 3 mol/L KOH electrolyte,which demonstrates significant improvements in a specific capacitance of approximately360 F/g,an energy density of approximately 18 Wh/kg,and a maximum power density of approximately 257 W/kg,respectively.Moreover,NdCrO_(3)/GO nanocomposite maintains a cyclic stability of 97.6%after4000 cycles.Photoluminescence(PL)spectroscopy confirms the wide bandgap nature of the NdCrO_(3)and NdCrO_(3)/GO nanocomposite,indicating its potential application in UVC devices.These findings emphasize the potential of the NdCrO_(3)/GO nanocomposite in advancing efficient energy storage solutions and the possibility of being used in UVC technology.展开更多
An rGO−like carbon compound has been synthesized from biomass,i.e.,old coconut shell,by a carbonization process followed by heating at 400°C for 5 h.The nitrogen doping was achieved by adding the urea(CH4N2O)and ...An rGO−like carbon compound has been synthesized from biomass,i.e.,old coconut shell,by a carbonization process followed by heating at 400°C for 5 h.The nitrogen doping was achieved by adding the urea(CH4N2O)and stirring at 70°C for 14 h.The morphology and structure of the rGO-like carbon were investigated by electron microscopies and Raman spectroscopy.The presence of C-N functional groups was analyzed by Fourier transform infrared and synchrotron X-ray photoemission spectroscopy,while the particle and the specific capacitance were measured by particle sizer and cyclic voltammetry.The highest specific capacitance of 72.78 F/g is achieved by the sample with 20%urea,having the smallest particles size and the largest surface area.The corresponding sample has shown to be constituted by the appropriate amount of C–N pyrrolic and pyridinic defects.展开更多
For high performance supercapacitors, novel hierarchical yolk-shell α-Ni(OH)_(2)/Mn_(2)O_(3) microspheres were controllably synthesized using a facile two-step method based on the solvothermal treatment. The unique ...For high performance supercapacitors, novel hierarchical yolk-shell α-Ni(OH)_(2)/Mn_(2)O_(3) microspheres were controllably synthesized using a facile two-step method based on the solvothermal treatment. The unique α-Ni(OH)_(2) based yolk-shell microstructures decorated with numerous interconnected nanosheets and the heterocomposition features can synergistically enhance reactive site exposure and electron conduction within the microspheres, facilitate charge transfer between electrolyte and electrode materials, and release structural stress during OH− chemisorption/desorption. Moreover, the Mn2O3 sediments distributed over the α-Ni(OH)_(2) microspheres can serve as an effective protective layer for electrochemical reactions. Consequently, when tested in 1 mol·L^(−1) KOH aqueous electrolyte for supercapacitors, the yolk-shell α-Ni (OH)_(2)/Mn_(2)O_(3) microspheres exhibited a considerably high specific capacitance of 2228.6 F·g^(−1) at 1 A·g^(−1) and an impressive capacitance retention of 77.7% after 3000 cycles at 10 A·g^(−1). The proposed α-Ni(OH)_(2)/Mn_(2)O_(3) microspheres with hetero-composition and unique hierarchical yolk-shell microstructures are highly promising to be used as electrode materials in supercapacitors and other energy storage devices.展开更多
Supercapacitors are gaining popularity due to their high cycling stability,power density,and fast charge and discharge rates.Researchers are ex-ploring electrode materials,electrolytes,and separat-ors for cost-effecti...Supercapacitors are gaining popularity due to their high cycling stability,power density,and fast charge and discharge rates.Researchers are ex-ploring electrode materials,electrolytes,and separat-ors for cost-effective energy storage systems.Ad-vances in materials science have led to the develop-ment of hybrid nanomaterials,such as combining fil-amentous carbon forms with inorganic nanoparticles,to create new charge and energy transfer processes.Notable materials for electrochemical energy-stor-age applications include MXenes,2D transition met-al carbides,and nitrides,carbon black,carbon aerogels,activated carbon,carbon nanotubes,conducting polymers,carbon fibers,and nanofibers,and graphene,because of their thermal,electrical,and mechanical properties.Carbon materials mixed with conducting polymers,ceramics,metal oxides,transition metal oxides,metal hydroxides,transition metal sulfides,trans-ition metal dichalcogenide,metal sulfides,carbides,nitrides,and biomass materials have received widespread attention due to their remarkable performance,eco-friendliness,cost-effectiveness,and renewability.This article explores the development of carbon-based hybrid materials for future supercapacitors,including electric double-layer capacitors,pseudocapacitors,and hy-brid supercapacitors.It investigates the difficulties that influence structural design,manufacturing(electrospinning,hydro-thermal/solvothermal,template-assisted synthesis,electrodeposition,electrospray,3D printing)techniques and the latest car-bon-based hybrid materials research offer practical solutions for producing high-performance,next-generation supercapacitors.展开更多
In this work,a facile"carbonization-activation"strategy is developed to synthesize N,P-codoped hierarchical porous carbon.Phosphoric acid is innovatively introduced during the hydrothermal process to achieve...In this work,a facile"carbonization-activation"strategy is developed to synthesize N,P-codoped hierarchical porous carbon.Phosphoric acid is innovatively introduced during the hydrothermal process to achieve in-situ P doping as well as create abundant pores,and the employment of sodamide is of vital importance to simultaneously serve as activating agent and N-source to succeed a high-level N doping.Thus,the obtained samples exhibit a unique three-dimensional hierarchical structure with an ultra-high specific surface area(3646 m^(2)g^(-1))and ultra-high N-doping level(9.81 at.%).Computational analyses confirm that N,P co-doping and higher N content can enhance active sites and widen potential differences of carbon materials to improve their capacitance.The as-prepared carbon materials demonstrate superior electrochemical performances,such as an ultra-high capacitance of 586 Fg^(-1)at 1 Ag^(-1),a superior rate capability of 409 Fg^(-1)at 20 Ag^(-1),and excellent long-term stability of 97%capacitance retention after10,000 cycles in 6 M KOH.Moreover,an assembled symmetric supercapacitor delivers a high energy density of 28.1 Wh kg^(-1)at the power density of 450 W kg^(-1)in 1 M Na_(2)SO_(4),demonstrating a great potential for applications in supercapacitors.展开更多
Superhydrophilic surfaces have been applied for supercapacitor;however,during energy storage reaction,how the wettability affects the process of electrochemical reaction specifically is still unclear.Herein,we demonst...Superhydrophilic surfaces have been applied for supercapacitor;however,during energy storage reaction,how the wettability affects the process of electrochemical reaction specifically is still unclear.Herein,we demonstrate superhydrophilic surface for promotion of electrochemical reactions by liquid affinity and further explain the mechanism,where the transition of the wettability state caused by the change in surface free energy is the main reason for the obvious increase in specific capacitance.Through citric acid assistance strategy,an intrinsically hydrophobic Ni(OH)_(2)thick nanosheets(HNHTNs,16 nm)can be transitioned into superhydrophilic Ni(OH)_(2)ultrathin nanosheets(SNHUNs,6.8 nm),where the water contact angle was 0°and the surface free energy increased from 8.6to 65.8 mN·m^(-1),implying superhydrophilicity.Compared with HNHTNs,the specific capacitance of SNHUNs is doubled:from 1230 F·g^(-1)(HNHTNs)to 2350 F·g^(-1)(2A·g^(-1))and,even at 20 A·g^(-1),from 833 F·g^(-1)(HNHTNs)to 1670 F·g^(-1).The asymmetric capacitors assembled by SNHUNs and activated carbon show 52.44 Wh·kg^(-1)at 160W·kg^(-1)and excellent stability with~90%retention after5000 cycles(~80%retention after 9500 cycles).The promotion of electrochemical performances is ascribed to the change of surface wettability caused by surface free energy,which greatly increase affinity of electrode to the surrounding liquid environment to reduce the interface resistance and optimize the electron transport path.展开更多
Coral reef-like PANI nanotubes composed of nanopaticles were successfully synthesized by a reactive template of manganese oxide.The structure was characterized by using SEM,TEM,and FT-IR,and the supercapacitive behavi...Coral reef-like PANI nanotubes composed of nanopaticles were successfully synthesized by a reactive template of manganese oxide.The structure was characterized by using SEM,TEM,and FT-IR,and the supercapacitive behaviors of these nanotubes were investigated with cyclic voltammetry（CV）,and charge-discharge tests,respectively.A maximum specific capacitance of 533 F/g could be achieved in 1mol/L aqueous H_2SO_4 with the potential range of -0.2 to 0.8 V（vs.the saturated calomel electrode） in a half-cell setup configuration for PANI electrode,suggesting its potential application in the electrode material for electrochemical capacitors.展开更多
Taking the selection of coal-tar pitch as precursor and KOH as activated agent, the activated carbon electrode material was fabricated for supercapacitor.The surface area and the pore structure of activated carbon wer...Taking the selection of coal-tar pitch as precursor and KOH as activated agent, the activated carbon electrode material was fabricated for supercapacitor.The surface area and the pore structure of activated carbon were analyzed by Nitro adsorption method. The electrochemical properties of the activated carbons were determined using two-electrode capacitors in 6 mol/L KOH aqueous electrolytes. The influences of activated temperature and mass ratio of KOH to C on the pore structure and electrochemical property of porous activated carbon were investigated in detail. The reasons for the changes of pore structure and electrochemical performance of activated carbon prepared under different conditions were also discussed theoretically. The results indicate that the maximum specific capacitance of 240 F/g can be obtained in alkaline medium, and the surface area, the pore structure and the specific capacitance of activated carbon depend on the treatment methods; the capacitance variation of activated carbon cannot be interpreted only by the change of surface area and pore structure, the lattice order and the electrolyte wetting effect of the activated carbon should also be taken into account.展开更多
The conversion of biomass waste into eco-nomical and high-performance energy storage devices receives significant attention.Herein,a facile and green method to prepare porous active carbon from walnut sep-tum is appli...The conversion of biomass waste into eco-nomical and high-performance energy storage devices receives significant attention.Herein,a facile and green method to prepare porous active carbon from walnut sep-tum is applied to the electrode materials of supercapacitors.The effect of chemical etching reagent(KOH)on the microstructure and specific capacitance of the porous car-bon are explored.The modified BC-2.0,with a KOH/walnut septum mass ratio of 2∶1,exhibits large specific surface area of 1003.9 m^(2)·g^(-1)with hierarchical micro-mesoporous structures.BC-2.0 reveals a superior specific capacitance of 457 F·g^(-1)at 1 A·g^(-1).The flexible sym-metric supercapacitor in gel electrolyte(KOH/PVA)exhi-bits considerable synergetic energy-power output performance.The results indicate that walnut septum is a better precursor to obtain activated carbons relative to other biomass carbon sources.The large mesoporosity after activation effectively boosts the electrochemical properties of supercapacitor.Consequently,the walnut septum has potential to be a superior electrode material for supercapacitors.展开更多
Recently,more and more supercapacitors(SCs)have been developed as AC line filter capacitors,which are generally named AC line filter electrochemical capacitors(FECs).Compared to traditional bulky aluminum electrolytic...Recently,more and more supercapacitors(SCs)have been developed as AC line filter capacitors,which are generally named AC line filter electrochemical capacitors(FECs).Compared to traditional bulky aluminum electrolytic capacitors(AECs),FECs have higher capacity and lower space occupancy,which makes them a strong competitor.However,different from the common SCs for energy storage,it is necessary to consider the frequency response of the SCs for AC line filtering,where the contradiction between frequency response and specific capacitance is a challenge.The researchers have proposed different solutions from the perspective of materials,morphology,and configuration for this challenge.Based on the above background,in this review,we briefly introduce the principle and parameters of AC line filter electrochemical capacitors.We systematically summarize the state-of-the-art progresses of FECs and discuss their possible application and development in the future.The development of FECs can greatly promote the planarization,integration,and miniaturization of filter capacitors,and provide a new solution for the utilization of green and unstable energy.展开更多
Because of the low energy requirement and the environmentally safe byproducts, the capacitive deionization water desalination technology has attracted the attention of many researchers. The important requirements for ...Because of the low energy requirement and the environmentally safe byproducts, the capacitive deionization water desalination technology has attracted the attention of many researchers. The important requirements for electrode materials are good electrical conductivity, high surface area, good chemical stability and high specific capacitance. In this study, metallic nanoparticles that are encapsulated in a graphite shell(Cd doped Co/C NPs) are introduced as the new electrode material for the capacitive deionization process because they have higher specific capacitance than the pristine carbonaceous materials. Cd doped Co/C NPs perform better than graphene and the activated carbon. The introduced nanoparticles were synthesized using a simple sol gel technique. A typical sol gel composed of cadmium acetate, cobalt acetate and poly(vinyl alcohol)was prepared based on the polycondensation property of the acetates. The physiochemical characterizations that were used confirmed that the drying, grinding and calcination in an Ar atmosphere of the prepared gel produced the Cd doped Co nanoparticles, which were encapsulated in a thin graphite layer. Overall, the present study suggests a new method to effectively use the encapsulated bimetallic nanostructures in the capacitive deionization technology.展开更多
MnO_(2)/biomass carbon nanocomposite was synthesized by a facile hydrothermal reaction.Silkworm excrement acted as a carbon precursor,which was activated by ZnCl_(2) and FeCl_(3) combining chemical agents under Ar atm...MnO_(2)/biomass carbon nanocomposite was synthesized by a facile hydrothermal reaction.Silkworm excrement acted as a carbon precursor,which was activated by ZnCl_(2) and FeCl_(3) combining chemical agents under Ar atmosphere.Thin and flower-like MnO_(2) nanowires were in-situ anchored on the surface of the biomass carbon.The biomass carbon not only offered high conductivity and good structural stability but also relieved the large volume expansion during the charge/discharge process.The obtained MnO_(2)/biomass carbon nanocomposite electrode exhibited a high specific capacitance(238 F·g^(-1) at 0.5 A·g^(-1))and a superior cycling stability with only 7% degradation after 2000 cycles.The observed good electrochemical performance is accredited to the materials’high specific surface area,multilevel hierarchical structure,and good conductivity.This study proposes a promising method that utilizes biological waste and broadens MnO_(2)-based electrode material application for next-generation energy storage and conversion devices.展开更多
Using the mesophase pitch as precursor, KOH and CO2 as activated agents, the activated carbon electrode material was fabricated by physical-chemical combined activated technique for supercapacitor. The influence of ac...Using the mesophase pitch as precursor, KOH and CO2 as activated agents, the activated carbon electrode material was fabricated by physical-chemical combined activated technique for supercapacitor. The influence of activated process on the pore structure of activated carbon was analyzed and 14 F supercapacitor with working voltage of 2.5 V was prepared. The charge and discharge behaviors, the properties of cyclic voltammetry, specific capacitance, equivalent serials resistance （ESR）, cycle properties, and temperature properties of prepared supercapacitor were examined. The cyclic voltammetry curve results indicate that the carbon based supercapacitor using the self-made activated carbon as electrode materials shows the desired capacitance properties. In 1 mol/L Et4NBF4/AN electrolyte, the capacitance and ESR of the supercapacitor are 14.7 F and 60 mΩ respectively, The specific capacitance of activated carbon electrode materials is 99.6 F/g; its energy density can reach 2,96 W.h/kg under the large current discharge condition, There is no obvious capacitance decay that can be observed after 5000 cycles, The leakage current is below 0,2 mA after keeping the voltage at 2.5 V for l h, Meanwhile, the supercapacitor shows desired temperature property; it can be operated normally in the temperature ranging from -40 ℃to 70 ℃,展开更多
We report here the activated carbon and cobalt hexacyanoferrate composite,which is applied as the electrode materials in symmetric supercapacitors containing a 1.0 M Na_(2)SO_(4) aqueous electrolyte.This novel materia...We report here the activated carbon and cobalt hexacyanoferrate composite,which is applied as the electrode materials in symmetric supercapacitors containing a 1.0 M Na_(2)SO_(4) aqueous electrolyte.This novel material combines high specific surface area and electrochemical stability of activated carbon with the redox properties of cobalt hexacyanoferrate,resulting in maximum specific capacitance of 329 F g^(-1) with large voltage working window of 2.0 V.Electrochemical studies indicated that cobalt hexacyanoferrate introduces important pseudocapacitive properties accounting for the overall charge-storage process,especially when I<0.5 A g^(-1).At lower gravimetric currents(e.g.,0.05 A g^(-1))and up to 1.0 V,the presence of cobalt hexacyanoferrate improves the specific energy for more than 300%.In addition,to better understanding the energy storage process we also provided a careful investigation of the electrode materials under dynamic polarization conditions using the in situ Raman spectroscopy and synchrotron light Xray diffraction techniques.Interesting complementary findings were obtained in these studies.We believe that this novel electrode material is promising for applications regarding the energy-storage process in pseudocapacitors with long lifespan properties.展开更多
Although transition metal phospho-sulfides deliver outstanding electrochemical performance,complex preparation methods hindered their further development.Herein,we report a facile one-step electrodeposition approach t...Although transition metal phospho-sulfides deliver outstanding electrochemical performance,complex preparation methods hindered their further development.Herein,we report a facile one-step electrodeposition approach to deposit interconnected nanowalls-like nickel cobalt phospho-sulfide(Ni-Co-P-S)nanosheets onto the surface of carbon cloth.The thin Ni-Co-P-S nanosheets with multi-components and synergetic effects delivered rich active sites,further enhancing reversible capacitance.Therefore,the as-prepared Ni-Co-P-S electrode materials exhibit excellent electrochemical performance in a three-electrode system,showcasing a high specific capacitance of 2744 F/g at 4 A/g.The full supercapacitors based on Ni-Co-P-S as positive electrode and active carbon as negative electrode showcase a high specific capacitance of 110.9 F/g at 1 A/g,impressive energy density of 39.4 Wh/kg at a power density of 797.5 W/kg in terms of excellent cycling stability(91.87%retention after 10,000 cycles).This simple electrode position strategy for synthesizing Ni-Co-P-S can be extended to prepare electrode materials for various sustainable electrochemical energy storage/conversion technologies.展开更多
Low-cost,high safety and environment-friendly aqueous energy storage systems(ESSs)are huge potential for grid-level energy storage,but the(de)intercalation of metal ions in the electrode materials(e.g.vanadium oxides)...Low-cost,high safety and environment-friendly aqueous energy storage systems(ESSs)are huge potential for grid-level energy storage,but the(de)intercalation of metal ions in the electrode materials(e.g.vanadium oxides)to obtain superior long-term cycling stability is a significant challenge.Herein,we demonstrate that polyvinyl alcohol(PVA)-assisted hydrated vanadium pentoxide/reduced graphene oxide(V_(2)O_(5)·n H_(2)O/r GO/PVA,denoted as the VGP)films enable long cycle stability and high capacity for the Li^(+)and Zn^(2+)storages in both the VGP//Li Cl(aq)//VGP and the VGP//Zn SO4(aq)//Zn cells.The binderfree VGP films are synthesized by a one-step hydrothermal method combination with the filtration.The extensive hydrogen bonds are formed among PVA,GO and H_(2)O,and they act as structural pillars and connect the adjacent layers as glue,which contributes to the ultrahigh specific capacitance and ultralong cyclic performance of Li^(+)and Zn^(2+)storage properties.As for Li^(+)storage,the binder-free VGP4 film(4mg PVA)electrode achieves the highest specific capacitance up to 1381 F g^(-1)at 1.0 A g^(-1)in the three-electrode system and 962 F g^(-1)at 1.0 A g^(-1)in the symmetric two-electrode system.It also behaves the outstanding cyclic performance with the capacitance retention of 96.5%after 15000 cycles in the three-electrode system and 99.7%after 25000 cycles in the symmetric two-electrode system.As for Zn^(2+)storage,the binder-free VGP4 film electrode exhibits the high specific capacity of 184 m A h g^(-1)at 0.5A g^(-1)in the VGP4//Zn SO4(aq)//Zn cell and the superb cycle performance of 98.5%after 25000 cycles.This work not only provides a new strategy for the construction of vanadium oxides composites and demonstrates the potential application of PVA-assisted binder-free film with excellent electrochemical properties,but also extends to construct other potential electrode materials for metal ion storage cells.展开更多
Activated carbons(ACs) with a wide range of surface areas were made from petroleum coke by means of KOH activation. The electrochemical characterization was carried out for several activated carbons used as polarizabl...Activated carbons(ACs) with a wide range of surface areas were made from petroleum coke by means of KOH activation. The electrochemical characterization was carried out for several activated carbons used as polarizable electrodes of electric double-layer capacitors(EDLCs) in an aqueous electrolytic solution. The porous structures and electrochemical double-layer capacitance of the activated carbons were investigated by virtue of nitrogen gas adsorption and constant current cycling(CCC) methods. The relationship among the surface area, pore volume of the activated carbons and specific double-layer capacitance was discussed. It was found that the specific capacitance of ACs increased linearly with the increase of surface area. The presence of mesopores in the activated carbons with very high surface area(>2000 m\+2/g) was not very effective for them to be used as EDLCs. The influence of chemical characteristics of the activated carbons on the double layer formation could be considered to be negligible.展开更多
One-dimensional graphene fibers(GFs)possess excellent properties,including high electrical conductivity,good physical and chemical stability,high thermal conductivity,flexibility,etc.GFs are ideal electrode materials ...One-dimensional graphene fibers(GFs)possess excellent properties,including high electrical conductivity,good physical and chemical stability,high thermal conductivity,flexibility,etc.GFs are ideal electrode materials for fiber-shaped supercapacitors.However,due to the lack of an effective method to manufacture GFs with high specific capacitance,their low energy density hinders their practical application.Herein,we decorated wet-spun graphene oxide fibers(GOFs)by dip-coating them with graphene oxide(GO)solutions containing different contents of lignin to obtain a core-sheath lignin/GO composite fibers.After carbonization and activation,we successfully prepared lignin derived carbon/GF electrodes.The assembled fiber-shaped supercapacitors(FSSCs)exhibit a specific capacitance of 9.98 mF/cm^(2)and an energy density of 0.89μW·h/cm^(2),about 6 times of those of pure GFs(1.57 mF/cm^(2)and 0.14μW·h/cm^(2),respectively),long cycling life and cycling stability.This suggests that the introduction of lignin derived carbon into GFs can effectively increase the specific capacitance and the energy density of FSSCs.展开更多
Over the last two decades,extensive study has been done on two-dimensional Molybdenum Sulphide(MoS_(2))due to its outstanding features in energy storage applications.Although MoS_(2)has a lot of active sulphur edges,t...Over the last two decades,extensive study has been done on two-dimensional Molybdenum Sulphide(MoS_(2))due to its outstanding features in energy storage applications.Although MoS_(2)has a lot of active sulphur edges,the presence of inactive surfaces leads to limit conductivity and efficiency.Hence,in this article,we aimed to promote the additional active sites by doping various weight percentages(2%,4%,6%,8%and 10%)of Nickel(Ni)into the MoS_(2)matrix by simple hydrothermal technique,and their doping effects were investigated with the help of Physio-chemical analyses.X-ray diffraction(XRD)pattern,Raman,and chemical composition(XPS)analyses were used to confirm the Ni incorporation in MoS_(2)nanosheets.Microscopic investigations demonstrated that Ni-doped MoS_(2)nanosheets were vertically aligned with enhanced interlayer spacing.Cyclic voltammetry,Galvanostatic charge-discharge,and electrochemical impedance spectroscopy investigations were used to characterize the electrochemical characteristics.The 6%Ni-doped MoS_(2)electrode material showed better CSPof 528.7 F/g@1 A/g and excellent electrochemical stability(85%of capacitance retention after 10,000 cycles at 5 A/g)compared to other electrode materials.Furthermore,the solid-state asymmetric supercapacitor was assembled using Nidoped MoS_(2)and graphite as anode and cathode materials and analysed the electrochemical properties in the two-electrode system.To determine the impact of the Ni-atom on the MoS_(2)surface,firstprinciples computations were performed.Further,it was examined for electronic band structure,the projected density of states(PDOS)and Bader charge transfer analyses.展开更多
Manganese dioxide was synthesized by electrodeposition method with Mn （CH3COO）24H2O as a raw material. La（NO3）3？6H2O was doped in electroyte during the preparing process to improve the performance of MnO2 electro...Manganese dioxide was synthesized by electrodeposition method with Mn （CH3COO）24H2O as a raw material. La（NO3）3？6H2O was doped in electroyte during the preparing process to improve the performance of MnO2 electrodes. The micrographs, crystal structure and element content of electrodes were analyzed by SEM, XRD and atomic absorption spectroscopy, respectively. It is found that the La content ratio in the dioxide can be easily controlled by adjusting the composition of the plating solution. Appropriate amount of doped La can increase the surface area of Mn/La materials, resulting in the supercapacitive behavior enhancement. Electrochemical tests show that the specific capacitance is significantely increased from 198.72 F？g-1 to 276.60 F？g-1 by La-doping.展开更多
基金support from the Deanship of Scientific Research at King Khalid University,Saudi Arabia(RGP2/505/45)。
文摘Neodymium chromium oxide(NdCrO_(3))and NdCrO_(3)/graphene oxide(GO)nanocomposite were synthesized via sol-gel and co-precipitation techniques for being used in high-perfo rmance supercapacitors and for the possible application in ultraviolet(UV)materials.Herein the systematic synthesis approach was adopted,which enhances the optical and electrical properties of the grown wide band-gap composite nanomaterial.Structural characterization of the grown materials was attempted using X-ray diffraction(XRD)and scanning electron microscopy(SEM).Most importantly the electrochemical analysis of the grown samples was carried out by employing a glassy carbon electrode and 3 mol/L KOH electrolyte,which demonstrates significant improvements in a specific capacitance of approximately360 F/g,an energy density of approximately 18 Wh/kg,and a maximum power density of approximately 257 W/kg,respectively.Moreover,NdCrO_(3)/GO nanocomposite maintains a cyclic stability of 97.6%after4000 cycles.Photoluminescence(PL)spectroscopy confirms the wide bandgap nature of the NdCrO_(3)and NdCrO_(3)/GO nanocomposite,indicating its potential application in UVC devices.These findings emphasize the potential of the NdCrO_(3)/GO nanocomposite in advancing efficient energy storage solutions and the possibility of being used in UVC technology.
基金supported by“Hibah Penelitian Dasar Kompetitif Nasional”,Ministry of Education,Culture,Research and Technology,Indonesia,2021–2022(D).The use of the synchrotron XPES facility at SLRI(Public Organization),Thailand,and some experimental facilities at UNIMAP and UPM,Malaysia,would also be appreciated.
文摘An rGO−like carbon compound has been synthesized from biomass,i.e.,old coconut shell,by a carbonization process followed by heating at 400°C for 5 h.The nitrogen doping was achieved by adding the urea(CH4N2O)and stirring at 70°C for 14 h.The morphology and structure of the rGO-like carbon were investigated by electron microscopies and Raman spectroscopy.The presence of C-N functional groups was analyzed by Fourier transform infrared and synchrotron X-ray photoemission spectroscopy,while the particle and the specific capacitance were measured by particle sizer and cyclic voltammetry.The highest specific capacitance of 72.78 F/g is achieved by the sample with 20%urea,having the smallest particles size and the largest surface area.The corresponding sample has shown to be constituted by the appropriate amount of C–N pyrrolic and pyridinic defects.
基金the National Natural Science Foundation of China(Grant Nos.21908037,91834301)the Fundamental Research Funds for the Central Universities of China(Grant No.JZ2019HGBZ0147).
文摘For high performance supercapacitors, novel hierarchical yolk-shell α-Ni(OH)_(2)/Mn_(2)O_(3) microspheres were controllably synthesized using a facile two-step method based on the solvothermal treatment. The unique α-Ni(OH)_(2) based yolk-shell microstructures decorated with numerous interconnected nanosheets and the heterocomposition features can synergistically enhance reactive site exposure and electron conduction within the microspheres, facilitate charge transfer between electrolyte and electrode materials, and release structural stress during OH− chemisorption/desorption. Moreover, the Mn2O3 sediments distributed over the α-Ni(OH)_(2) microspheres can serve as an effective protective layer for electrochemical reactions. Consequently, when tested in 1 mol·L^(−1) KOH aqueous electrolyte for supercapacitors, the yolk-shell α-Ni (OH)_(2)/Mn_(2)O_(3) microspheres exhibited a considerably high specific capacitance of 2228.6 F·g^(−1) at 1 A·g^(−1) and an impressive capacitance retention of 77.7% after 3000 cycles at 10 A·g^(−1). The proposed α-Ni(OH)_(2)/Mn_(2)O_(3) microspheres with hetero-composition and unique hierarchical yolk-shell microstructures are highly promising to be used as electrode materials in supercapacitors and other energy storage devices.
文摘Supercapacitors are gaining popularity due to their high cycling stability,power density,and fast charge and discharge rates.Researchers are ex-ploring electrode materials,electrolytes,and separat-ors for cost-effective energy storage systems.Ad-vances in materials science have led to the develop-ment of hybrid nanomaterials,such as combining fil-amentous carbon forms with inorganic nanoparticles,to create new charge and energy transfer processes.Notable materials for electrochemical energy-stor-age applications include MXenes,2D transition met-al carbides,and nitrides,carbon black,carbon aerogels,activated carbon,carbon nanotubes,conducting polymers,carbon fibers,and nanofibers,and graphene,because of their thermal,electrical,and mechanical properties.Carbon materials mixed with conducting polymers,ceramics,metal oxides,transition metal oxides,metal hydroxides,transition metal sulfides,trans-ition metal dichalcogenide,metal sulfides,carbides,nitrides,and biomass materials have received widespread attention due to their remarkable performance,eco-friendliness,cost-effectiveness,and renewability.This article explores the development of carbon-based hybrid materials for future supercapacitors,including electric double-layer capacitors,pseudocapacitors,and hy-brid supercapacitors.It investigates the difficulties that influence structural design,manufacturing(electrospinning,hydro-thermal/solvothermal,template-assisted synthesis,electrodeposition,electrospray,3D printing)techniques and the latest car-bon-based hybrid materials research offer practical solutions for producing high-performance,next-generation supercapacitors.
基金financially supported by the National Natural Science Foundation of China(Nos.21776147,21606140,61604086,and 21905153)the Qingdao Municipal Science and Technology Bureau,China(19-6-1-91-nsh)+2 种基金the International Science&Technology Cooperation Program of China(No.2014DFA60150)the Department of Science and Technology of Shandong Province(Nos.ZR2018BB066 and 2016GGX104010)the Chemcloudcomputing of National Supercomputing Center in Shenzhen(Shenzhen CloudComputing Center)。
文摘In this work,a facile"carbonization-activation"strategy is developed to synthesize N,P-codoped hierarchical porous carbon.Phosphoric acid is innovatively introduced during the hydrothermal process to achieve in-situ P doping as well as create abundant pores,and the employment of sodamide is of vital importance to simultaneously serve as activating agent and N-source to succeed a high-level N doping.Thus,the obtained samples exhibit a unique three-dimensional hierarchical structure with an ultra-high specific surface area(3646 m^(2)g^(-1))and ultra-high N-doping level(9.81 at.%).Computational analyses confirm that N,P co-doping and higher N content can enhance active sites and widen potential differences of carbon materials to improve their capacitance.The as-prepared carbon materials demonstrate superior electrochemical performances,such as an ultra-high capacitance of 586 Fg^(-1)at 1 Ag^(-1),a superior rate capability of 409 Fg^(-1)at 20 Ag^(-1),and excellent long-term stability of 97%capacitance retention after10,000 cycles in 6 M KOH.Moreover,an assembled symmetric supercapacitor delivers a high energy density of 28.1 Wh kg^(-1)at the power density of 450 W kg^(-1)in 1 M Na_(2)SO_(4),demonstrating a great potential for applications in supercapacitors.
基金financially supported by the National Natural Science Foundation of China(Nos.22278349 and 62071413)Hebei Natural Science Foundation(Nos.B2020203013 and F2020203056)+4 种基金the Science and Technology Project of Hebei Education Department(No.QN2020137)Subsidy for Hebei Key Laboratory of Applied Chemistry after Operation Performance(No.22567616H)the Cultivation Project for Basic Research Innovation of Yanshan University(No.2021LGZD015)the Natural Science Foundation of Heilongjiang Province of China(No.LH2022B025)the Fundamental Research Funds for the Provincial Universities of Heilongjiang Province(No.KYYWF10236190104)。
文摘Superhydrophilic surfaces have been applied for supercapacitor;however,during energy storage reaction,how the wettability affects the process of electrochemical reaction specifically is still unclear.Herein,we demonstrate superhydrophilic surface for promotion of electrochemical reactions by liquid affinity and further explain the mechanism,where the transition of the wettability state caused by the change in surface free energy is the main reason for the obvious increase in specific capacitance.Through citric acid assistance strategy,an intrinsically hydrophobic Ni(OH)_(2)thick nanosheets(HNHTNs,16 nm)can be transitioned into superhydrophilic Ni(OH)_(2)ultrathin nanosheets(SNHUNs,6.8 nm),where the water contact angle was 0°and the surface free energy increased from 8.6to 65.8 mN·m^(-1),implying superhydrophilicity.Compared with HNHTNs,the specific capacitance of SNHUNs is doubled:from 1230 F·g^(-1)(HNHTNs)to 2350 F·g^(-1)(2A·g^(-1))and,even at 20 A·g^(-1),from 833 F·g^(-1)(HNHTNs)to 1670 F·g^(-1).The asymmetric capacitors assembled by SNHUNs and activated carbon show 52.44 Wh·kg^(-1)at 160W·kg^(-1)and excellent stability with~90%retention after5000 cycles(~80%retention after 9500 cycles).The promotion of electrochemical performances is ascribed to the change of surface wettability caused by surface free energy,which greatly increase affinity of electrode to the surrounding liquid environment to reduce the interface resistance and optimize the electron transport path.
基金the financial support from the National Natural Science Foundation of China (No.50602020)the National Basic Research Program of China(No.2007CB216408)
文摘Coral reef-like PANI nanotubes composed of nanopaticles were successfully synthesized by a reactive template of manganese oxide.The structure was characterized by using SEM,TEM,and FT-IR,and the supercapacitive behaviors of these nanotubes were investigated with cyclic voltammetry（CV）,and charge-discharge tests,respectively.A maximum specific capacitance of 533 F/g could be achieved in 1mol/L aqueous H_2SO_4 with the potential range of -0.2 to 0.8 V（vs.the saturated calomel electrode） in a half-cell setup configuration for PANI electrode,suggesting its potential application in the electrode material for electrochemical capacitors.
基金Project(2005CB623703) supported by the National Basic Research Program of China project(5JJ30103) supported bythe Natural Science Foundation of Hunan Province
文摘Taking the selection of coal-tar pitch as precursor and KOH as activated agent, the activated carbon electrode material was fabricated for supercapacitor.The surface area and the pore structure of activated carbon were analyzed by Nitro adsorption method. The electrochemical properties of the activated carbons were determined using two-electrode capacitors in 6 mol/L KOH aqueous electrolytes. The influences of activated temperature and mass ratio of KOH to C on the pore structure and electrochemical property of porous activated carbon were investigated in detail. The reasons for the changes of pore structure and electrochemical performance of activated carbon prepared under different conditions were also discussed theoretically. The results indicate that the maximum specific capacitance of 240 F/g can be obtained in alkaline medium, and the surface area, the pore structure and the specific capacitance of activated carbon depend on the treatment methods; the capacitance variation of activated carbon cannot be interpreted only by the change of surface area and pore structure, the lattice order and the electrolyte wetting effect of the activated carbon should also be taken into account.
基金financially supported by the National Natural Science Foundation of China (Nos. 51874079 and 11775226)the Natural Science Foundation of Hebei Province (Nos. E2018501091, E2020501001 and E2021501029)+2 种基金Hebei Province Key Research and Development Plan Project (No.19211302D)the Natural Science Foundation of Liaoning Province (No. 2019-MS-110)the Fundamental Research Funds for the Central Universities (No. N2023040 and N2123035)
文摘The conversion of biomass waste into eco-nomical and high-performance energy storage devices receives significant attention.Herein,a facile and green method to prepare porous active carbon from walnut sep-tum is applied to the electrode materials of supercapacitors.The effect of chemical etching reagent(KOH)on the microstructure and specific capacitance of the porous car-bon are explored.The modified BC-2.0,with a KOH/walnut septum mass ratio of 2∶1,exhibits large specific surface area of 1003.9 m^(2)·g^(-1)with hierarchical micro-mesoporous structures.BC-2.0 reveals a superior specific capacitance of 457 F·g^(-1)at 1 A·g^(-1).The flexible sym-metric supercapacitor in gel electrolyte(KOH/PVA)exhi-bits considerable synergetic energy-power output performance.The results indicate that walnut septum is a better precursor to obtain activated carbons relative to other biomass carbon sources.The large mesoporosity after activation effectively boosts the electrochemical properties of supercapacitor.Consequently,the walnut septum has potential to be a superior electrode material for supercapacitors.
基金financially supported by the National Natural Science Foundation of China(U20A20209)Zhejiang Provincial Key Research and Development Program(2021C01030)+7 种基金Zhejiang Provincial Natural Science Foundation of China(LD19E020001)Open Project of Laboratory for Biomedical Engineering of Ministry of Education,Zhejiang UniversityNational Key R@D Program of China(2016YFB0100100)National Natural Science Foundation of China(51872283,22075279,21805273)Liaoning Revitalization Talents Program(XLYC1807153)Dalian Innovation Support Plan for High Level Talents(2019RT09)Dalian National Laboratory For Clean Energy(DNL),CAS,DNL Cooperation Fund,CAS(DNL201912 and DNL201915)DICP(DICP ZZBS201708,DICP ZZBS201802,and DICP I2020032).
文摘Recently,more and more supercapacitors(SCs)have been developed as AC line filter capacitors,which are generally named AC line filter electrochemical capacitors(FECs).Compared to traditional bulky aluminum electrolytic capacitors(AECs),FECs have higher capacity and lower space occupancy,which makes them a strong competitor.However,different from the common SCs for energy storage,it is necessary to consider the frequency response of the SCs for AC line filtering,where the contradiction between frequency response and specific capacitance is a challenge.The researchers have proposed different solutions from the perspective of materials,morphology,and configuration for this challenge.Based on the above background,in this review,we briefly introduce the principle and parameters of AC line filter electrochemical capacitors.We systematically summarize the state-of-the-art progresses of FECs and discuss their possible application and development in the future.The development of FECs can greatly promote the planarization,integration,and miniaturization of filter capacitors,and provide a new solution for the utilization of green and unstable energy.
基金financially supported by the National Plan for Science & Technology (NPST), King Saud University Project No. 11-NAN1460-02
文摘Because of the low energy requirement and the environmentally safe byproducts, the capacitive deionization water desalination technology has attracted the attention of many researchers. The important requirements for electrode materials are good electrical conductivity, high surface area, good chemical stability and high specific capacitance. In this study, metallic nanoparticles that are encapsulated in a graphite shell(Cd doped Co/C NPs) are introduced as the new electrode material for the capacitive deionization process because they have higher specific capacitance than the pristine carbonaceous materials. Cd doped Co/C NPs perform better than graphene and the activated carbon. The introduced nanoparticles were synthesized using a simple sol gel technique. A typical sol gel composed of cadmium acetate, cobalt acetate and poly(vinyl alcohol)was prepared based on the polycondensation property of the acetates. The physiochemical characterizations that were used confirmed that the drying, grinding and calcination in an Ar atmosphere of the prepared gel produced the Cd doped Co nanoparticles, which were encapsulated in a thin graphite layer. Overall, the present study suggests a new method to effectively use the encapsulated bimetallic nanostructures in the capacitive deionization technology.
基金financially supported by the project“National College Students’Innovation and Entrepreneurship Training Program”,China under grant No.190170009.
文摘MnO_(2)/biomass carbon nanocomposite was synthesized by a facile hydrothermal reaction.Silkworm excrement acted as a carbon precursor,which was activated by ZnCl_(2) and FeCl_(3) combining chemical agents under Ar atmosphere.Thin and flower-like MnO_(2) nanowires were in-situ anchored on the surface of the biomass carbon.The biomass carbon not only offered high conductivity and good structural stability but also relieved the large volume expansion during the charge/discharge process.The obtained MnO_(2)/biomass carbon nanocomposite electrode exhibited a high specific capacitance(238 F·g^(-1) at 0.5 A·g^(-1))and a superior cycling stability with only 7% degradation after 2000 cycles.The observed good electrochemical performance is accredited to the materials’high specific surface area,multilevel hierarchical structure,and good conductivity.This study proposes a promising method that utilizes biological waste and broadens MnO_(2)-based electrode material application for next-generation energy storage and conversion devices.
基金Project(2007BAE12800) supported by the National Supported Plan for Science and TechnologyProject(06FJ4059) supported by the Hunan Provincial Academician Foundation
文摘Using the mesophase pitch as precursor, KOH and CO2 as activated agents, the activated carbon electrode material was fabricated by physical-chemical combined activated technique for supercapacitor. The influence of activated process on the pore structure of activated carbon was analyzed and 14 F supercapacitor with working voltage of 2.5 V was prepared. The charge and discharge behaviors, the properties of cyclic voltammetry, specific capacitance, equivalent serials resistance （ESR）, cycle properties, and temperature properties of prepared supercapacitor were examined. The cyclic voltammetry curve results indicate that the carbon based supercapacitor using the self-made activated carbon as electrode materials shows the desired capacitance properties. In 1 mol/L Et4NBF4/AN electrolyte, the capacitance and ESR of the supercapacitor are 14.7 F and 60 mΩ respectively, The specific capacitance of activated carbon electrode materials is 99.6 F/g; its energy density can reach 2,96 W.h/kg under the large current discharge condition, There is no obvious capacitance decay that can be observed after 5000 cycles, The leakage current is below 0,2 mA after keeping the voltage at 2.5 V for l h, Meanwhile, the supercapacitor shows desired temperature property; it can be operated normally in the temperature ranging from -40 ℃to 70 ℃,
基金the financial support from the Brazilian funding agencies CNPq(301486/2016-6)FAPESP(2014/02163-7,2017/11958-1,2018/20756-6)+2 种基金FAPEMIG(Financial support for the LMMA/UFVJM Laboratory)CNPq(PQ-2 grant:Process 301095/2018-3)the support from Shell and the strategic importance of the support given by ANP(Brazil’s National Oil,Natural Gas and Biofuels Agency)through the R&D levy regulation。
文摘We report here the activated carbon and cobalt hexacyanoferrate composite,which is applied as the electrode materials in symmetric supercapacitors containing a 1.0 M Na_(2)SO_(4) aqueous electrolyte.This novel material combines high specific surface area and electrochemical stability of activated carbon with the redox properties of cobalt hexacyanoferrate,resulting in maximum specific capacitance of 329 F g^(-1) with large voltage working window of 2.0 V.Electrochemical studies indicated that cobalt hexacyanoferrate introduces important pseudocapacitive properties accounting for the overall charge-storage process,especially when I<0.5 A g^(-1).At lower gravimetric currents(e.g.,0.05 A g^(-1))and up to 1.0 V,the presence of cobalt hexacyanoferrate improves the specific energy for more than 300%.In addition,to better understanding the energy storage process we also provided a careful investigation of the electrode materials under dynamic polarization conditions using the in situ Raman spectroscopy and synchrotron light Xray diffraction techniques.Interesting complementary findings were obtained in these studies.We believe that this novel electrode material is promising for applications regarding the energy-storage process in pseudocapacitors with long lifespan properties.
基金financially supported by the National Natural Science Foundation of China(Nos.52073137,21704038,51763018)the NSFC-DFG Joint Research Project(No.51761135114)the Natural Science Foundation of Jiangxi Province(Nos.20192BCB23001,20202ZDB01009).
文摘Although transition metal phospho-sulfides deliver outstanding electrochemical performance,complex preparation methods hindered their further development.Herein,we report a facile one-step electrodeposition approach to deposit interconnected nanowalls-like nickel cobalt phospho-sulfide(Ni-Co-P-S)nanosheets onto the surface of carbon cloth.The thin Ni-Co-P-S nanosheets with multi-components and synergetic effects delivered rich active sites,further enhancing reversible capacitance.Therefore,the as-prepared Ni-Co-P-S electrode materials exhibit excellent electrochemical performance in a three-electrode system,showcasing a high specific capacitance of 2744 F/g at 4 A/g.The full supercapacitors based on Ni-Co-P-S as positive electrode and active carbon as negative electrode showcase a high specific capacitance of 110.9 F/g at 1 A/g,impressive energy density of 39.4 Wh/kg at a power density of 797.5 W/kg in terms of excellent cycling stability(91.87%retention after 10,000 cycles).This simple electrode position strategy for synthesizing Ni-Co-P-S can be extended to prepare electrode materials for various sustainable electrochemical energy storage/conversion technologies.
基金partially supported by the National Natural Science Foundation of China(Nos.21771030 and 51572201)the Natural Science Foundation of Liaoning Province(No.2020-MS113)the Fundamental Research Funds for the Central Universities(No.DUT18RC(6)008)。
文摘Low-cost,high safety and environment-friendly aqueous energy storage systems(ESSs)are huge potential for grid-level energy storage,but the(de)intercalation of metal ions in the electrode materials(e.g.vanadium oxides)to obtain superior long-term cycling stability is a significant challenge.Herein,we demonstrate that polyvinyl alcohol(PVA)-assisted hydrated vanadium pentoxide/reduced graphene oxide(V_(2)O_(5)·n H_(2)O/r GO/PVA,denoted as the VGP)films enable long cycle stability and high capacity for the Li^(+)and Zn^(2+)storages in both the VGP//Li Cl(aq)//VGP and the VGP//Zn SO4(aq)//Zn cells.The binderfree VGP films are synthesized by a one-step hydrothermal method combination with the filtration.The extensive hydrogen bonds are formed among PVA,GO and H_(2)O,and they act as structural pillars and connect the adjacent layers as glue,which contributes to the ultrahigh specific capacitance and ultralong cyclic performance of Li^(+)and Zn^(2+)storage properties.As for Li^(+)storage,the binder-free VGP4 film(4mg PVA)electrode achieves the highest specific capacitance up to 1381 F g^(-1)at 1.0 A g^(-1)in the three-electrode system and 962 F g^(-1)at 1.0 A g^(-1)in the symmetric two-electrode system.It also behaves the outstanding cyclic performance with the capacitance retention of 96.5%after 15000 cycles in the three-electrode system and 99.7%after 25000 cycles in the symmetric two-electrode system.As for Zn^(2+)storage,the binder-free VGP4 film electrode exhibits the high specific capacity of 184 m A h g^(-1)at 0.5A g^(-1)in the VGP4//Zn SO4(aq)//Zn cell and the superb cycle performance of 98.5%after 25000 cycles.This work not only provides a new strategy for the construction of vanadium oxides composites and demonstrates the potential application of PVA-assisted binder-free film with excellent electrochemical properties,but also extends to construct other potential electrode materials for metal ion storage cells.
基金Supported by the Young Teacher Scientific Research Foundation of BU CT(No.QN0 2 4 9) and National Natural ScienceFoundation(No.5 0 2 72 0 70 )
文摘Activated carbons(ACs) with a wide range of surface areas were made from petroleum coke by means of KOH activation. The electrochemical characterization was carried out for several activated carbons used as polarizable electrodes of electric double-layer capacitors(EDLCs) in an aqueous electrolytic solution. The porous structures and electrochemical double-layer capacitance of the activated carbons were investigated by virtue of nitrogen gas adsorption and constant current cycling(CCC) methods. The relationship among the surface area, pore volume of the activated carbons and specific double-layer capacitance was discussed. It was found that the specific capacitance of ACs increased linearly with the increase of surface area. The presence of mesopores in the activated carbons with very high surface area(>2000 m\+2/g) was not very effective for them to be used as EDLCs. The influence of chemical characteristics of the activated carbons on the double layer formation could be considered to be negligible.
基金National Natural Science Foundation of China(No.51903033)Fundamental Research Funds for the Central Universities,China(Nos.2232020G-01 and 20D110110)Shanghai Sailing Program,China(No.19YF1400800)。
文摘One-dimensional graphene fibers(GFs)possess excellent properties,including high electrical conductivity,good physical and chemical stability,high thermal conductivity,flexibility,etc.GFs are ideal electrode materials for fiber-shaped supercapacitors.However,due to the lack of an effective method to manufacture GFs with high specific capacitance,their low energy density hinders their practical application.Herein,we decorated wet-spun graphene oxide fibers(GOFs)by dip-coating them with graphene oxide(GO)solutions containing different contents of lignin to obtain a core-sheath lignin/GO composite fibers.After carbonization and activation,we successfully prepared lignin derived carbon/GF electrodes.The assembled fiber-shaped supercapacitors(FSSCs)exhibit a specific capacitance of 9.98 mF/cm^(2)and an energy density of 0.89μW·h/cm^(2),about 6 times of those of pure GFs(1.57 mF/cm^(2)and 0.14μW·h/cm^(2),respectively),long cycling life and cycling stability.This suggests that the introduction of lignin derived carbon into GFs can effectively increase the specific capacitance and the energy density of FSSCs.
文摘Over the last two decades,extensive study has been done on two-dimensional Molybdenum Sulphide(MoS_(2))due to its outstanding features in energy storage applications.Although MoS_(2)has a lot of active sulphur edges,the presence of inactive surfaces leads to limit conductivity and efficiency.Hence,in this article,we aimed to promote the additional active sites by doping various weight percentages(2%,4%,6%,8%and 10%)of Nickel(Ni)into the MoS_(2)matrix by simple hydrothermal technique,and their doping effects were investigated with the help of Physio-chemical analyses.X-ray diffraction(XRD)pattern,Raman,and chemical composition(XPS)analyses were used to confirm the Ni incorporation in MoS_(2)nanosheets.Microscopic investigations demonstrated that Ni-doped MoS_(2)nanosheets were vertically aligned with enhanced interlayer spacing.Cyclic voltammetry,Galvanostatic charge-discharge,and electrochemical impedance spectroscopy investigations were used to characterize the electrochemical characteristics.The 6%Ni-doped MoS_(2)electrode material showed better CSPof 528.7 F/g@1 A/g and excellent electrochemical stability(85%of capacitance retention after 10,000 cycles at 5 A/g)compared to other electrode materials.Furthermore,the solid-state asymmetric supercapacitor was assembled using Nidoped MoS_(2)and graphite as anode and cathode materials and analysed the electrochemical properties in the two-electrode system.To determine the impact of the Ni-atom on the MoS_(2)surface,firstprinciples computations were performed.Further,it was examined for electronic band structure,the projected density of states(PDOS)and Bader charge transfer analyses.
基金Funded by the Natural Science Foundation of Hebei Province(No.B2008000758)
文摘Manganese dioxide was synthesized by electrodeposition method with Mn （CH3COO）24H2O as a raw material. La（NO3）3？6H2O was doped in electroyte during the preparing process to improve the performance of MnO2 electrodes. The micrographs, crystal structure and element content of electrodes were analyzed by SEM, XRD and atomic absorption spectroscopy, respectively. It is found that the La content ratio in the dioxide can be easily controlled by adjusting the composition of the plating solution. Appropriate amount of doped La can increase the surface area of Mn/La materials, resulting in the supercapacitive behavior enhancement. Electrochemical tests show that the specific capacitance is significantely increased from 198.72 F？g-1 to 276.60 F？g-1 by La-doping.
