The high-temperature dissolution behavior of primary carbides in samples taken from GCr15 continuous-casting bloom was observed in-situ by confocal laser scanning microscopy.Equations were fitted to the dissolution ki...The high-temperature dissolution behavior of primary carbides in samples taken from GCr15 continuous-casting bloom was observed in-situ by confocal laser scanning microscopy.Equations were fitted to the dissolution kinetics of primary carbides during either heating or soaking.Dissolution of carbides proceeded in three stages(fast→slow→faster)as either temperature or holding time was increased.During the heating process and during the first and third stages of the soaking process,the original size of the carbides determined the steepness of the slope,but during the middle(“slow”)stage of the soaking process,the slope remained zero.The initial size of the carbides varied greatly,but their final dissolution temperature fell within the narrow range of 1210-1235℃,and the holding time remained within 50 min.Fractal analysis was used to study the morphological characteristics of small and medium-sized carbides during the dissolution process.According to changes in the fractal dimension before and after soaking,the carbides tended to evolve towards a more regular morphology.展开更多
Based on spatio-temporal correlativity analysis method, the automatic identification techniques for data anomaly monitoring of coal mining working face gas are presented. The asynchronous correlative characteristics o...Based on spatio-temporal correlativity analysis method, the automatic identification techniques for data anomaly monitoring of coal mining working face gas are presented. The asynchronous correlative characteristics of gas migration in working face airflow direction are qualitatively analyzed. The calculation method of asynchronous correlation delay step and the prediction and inversion formulas of gas concentration changing with time and space after gas emission in the air return roadway are provided. By calculating one hundred and fifty groups of gas sensors data series from a coal mine which have the theoretical correlativity, the correlative coefficient values range of eight kinds of data anomaly is obtained. Then the gas moni- toring data anomaly identification algorithm based on spatio-temporal correlativity analysis is accordingly presented. In order to improve the efficiency of analysis, the gas sensors code rules which can express the spatial topological relations are sug- gested. The experiments indicate that methods presented in this article can effectively compensate the defects of methods based on a single gas sensor monitoring data.展开更多
Development of reaction-tailored electrocatalysts is becoming increasingly important as energy and environment are among key issues governing our sustainable future.Electrocatalysts are inherently optimized for applic...Development of reaction-tailored electrocatalysts is becoming increasingly important as energy and environment are among key issues governing our sustainable future.Electrocatalysts are inherently optimized for application towards reactions of interest in renewable energy,such as those involved in water splitting and artificial photosynthesis,owing to its energy efficiency,simple fabrication,and ease of operation.In this view,it is important to secure logical design principles for the synthesis of electrocatalysts for various reactions of interest,and also understand their catalytic mechanisms in the respective reactions for improvements in further iterations.In this review,we introduce several key methods of scanning electrochemical microscopy(SECM)in its applications towards electrocatalysis.A brief history and a handful of seminal works in the SECM field is introduced in advancing the synthetic designs of electrocatalysts and elucidation of the operating mechanism.New developments in nano-sizing of the electrodes in attempts for improved spatial resolution of SECM is also introduced,and the application of nanoelectrodes towards the investigation of formerly inaccessible single catalytic entities is shared.展开更多
In the process of logistics distribution of manufacturing enterprises, the automatic scheduling method based on the algorithm model has the advantages of accurate calculation and stable operation, but it excessively r...In the process of logistics distribution of manufacturing enterprises, the automatic scheduling method based on the algorithm model has the advantages of accurate calculation and stable operation, but it excessively relies on the results of data calculation, ignores historical information and empirical data in the solving process, and has the bottleneck of low processing dimension and small processing scale. Therefore, in the digital twin(DT) system based on virtual and real fusion, a modeling and analysis method of production logistics spatio-temporal graph network model is proposed, considering the characteristics of road network topology and time-varying data. In the DT system, the temporal graph network model of the production logistics task is established and combined with the network topology, and the historical scheduling information about logistics elements is stored in the nodes. When the dynamic task arrives, a multi-stage links probability prediction method is adopted to predict the possibility of loading, driving, and other link relationships between task-related entity nodes at each stage. Several experiments are carried out, and the prediction accuracy of the digital twin-based temporal graph network(DTGN) model trained by historical scheduling information reaches 99.2% when the appropriate batch size is selected. Through logistics simulation experiments, the feasibility and the effectiveness of production logistics spatio-temporal graph network analysis methods based on historical scheduling information are verified.展开更多
Introduction: Colorectal cancer(CRC) is a common type of neoplasm. This study examined the spatio?temporal distribution of the CRC incidence in Guangzhou during 2010–2014.Methods: Colorectal cancer incidence data wer...Introduction: Colorectal cancer(CRC) is a common type of neoplasm. This study examined the spatio?temporal distribution of the CRC incidence in Guangzhou during 2010–2014.Methods: Colorectal cancer incidence data were obtained from the Guangzhou Cancer Registry System. Spatial autocorrelation analysis and a retrospective spatio?temporal scan were used to assess the spatio?temporal cluster distribution of CRC cases.Results: A total of 14,618 CRC cases were registered in Guangzhou during 2010–2014, with a crude incidence of 35.56/100,000 and an age?standardized rate of incidence by the world standard population(ASRIW) of 23.58/100,000. The crude incidence increased by 19.70% from 2010(32.88/100,000) to 2014(39.36/100,000) with an average annual percentage change(AAPC) of 4.33%. The AAPC of ASRIW was not statistically significant. The spatial autocorrelation analysis revealed a CRC incidence hot spot in central urban areas in Guangzhou City, which included 25 streets in southwestern Baiyun District, northwestern Haizhu District, and the border region between Liwan and Yuexiu Dis?tricts. Three high? and five low?incidence clusters were identified according to spatio?temporal scan of CRC incidence clusters. The high?incidence clusters were located in central urban areas including the border regions between Bai?yun, Haizhu, Liwan, and Yuexiu Districts.Conclusions: This study revealed the spatio?temporal cluster pattern of the incidence of CRC in Guangzhou. This information can inform allocation of health resources for CRC screening.展开更多
The melt onset dates(MOD)over Arctic sea ice plays an important role in the seasonal cycle of sea ice surface properties,which impacts Arctic surface solar radiation absorbed by the ice-ocean system.Monitoring interan...The melt onset dates(MOD)over Arctic sea ice plays an important role in the seasonal cycle of sea ice surface properties,which impacts Arctic surface solar radiation absorbed by the ice-ocean system.Monitoring interannual variations in MOD is valuable for understanding climate change.In this study,we investigated the spatio-temporal variability of MOD over Arctic sea ice and 14 Arctic sub-regions in the period of 1979 to 2017 from passive microwave satellite data.A set of mathematical and statistical methods,including the Sen’s slope and Mann-Kendall mutation tests,were used to comprehensively assess the variation trend and abrupt points of MOD during the past 39 years for different Arctic sub-regions.Additionally,the correlation between Arctic Oscillation(AO)and MOD was analyzed.The results indicate that:(1)all Arctic sub-regions show a trend toward earlier MOD except the Bering Sea and St.Lawrence Gulf.The East Siberian Sea exhibits a significantly earlier trend,with the highest rate of-9.45 d/decade;(2)the temporal variability and statistical significance of MOD trend exhibit large interannual differences with different time windows for most regions in the Arctic;(3)during the past 39 years,the MOD changed abruptly in different years for different sub-regions;(4)the seasonal AO has more influence on MOD than monthly AO.The findings in this study can improve our knowledge of MOD changes and are beneficial for further Arctic climate change study.展开更多
Container technology plays an essential role in many Information and Communications Technology(ICT)systems.However,containers face a diversity of threats caused by vulnerable packages within container images.Previous ...Container technology plays an essential role in many Information and Communications Technology(ICT)systems.However,containers face a diversity of threats caused by vulnerable packages within container images.Previous vulnerability scanning solutions for container images are inadequate.These solutions entirely depend on the information extracted from package managers.As a result,packages installed directly from the source code compilation,or packages downloaded from the repository,etc.,are ignored.We introduce DAVS–A Dockerfile analysis-based vulnerability scanning framework for OCI-based container images to deal with the limitations of existing solutions.DAVS performs static analysis using file extraction based on Dockerfile information to obtain the list of Potentially Vulnerable Files(PVFs).The PVFs are then scanned to figure out the vulnerabilities in the target container image.The experimental shows the outperform of DAVS on detecting Common Vulnerabilities and Exposures(CVE)of 10 known vulnerable images compared to Clair–the most popular container image scanning project.Moreover,DAVS found that 68%of real-world container images are vulnerable from different image registries.展开更多
This study attempted to compare the performance of local polynomial interpolation,inverse distance weighted interpolation,and ordinary kriging in studying distribution patterns of swimming crabs.Cross-validation was u...This study attempted to compare the performance of local polynomial interpolation,inverse distance weighted interpolation,and ordinary kriging in studying distribution patterns of swimming crabs.Cross-validation was used to select the optimum method to get distribution results,and kriging was used for making spatial variability analysis.Data were collected from 87 sampling stations in November of 2015(autumn)and February(winter),May(spring)and August(summer)of 2016.Results indicate that swimming crabs widely distributed in autumn and summer:in the summer,they were more spatially independent,and resources in each sampling station varied a lot;in the winter and spring,the abundance of crabs was much lower,but the individual crab size was bigger,and they showed the patchy and more concentrative distribution pattern,which means they were more spatially dependent.Distribution patterns were in accordance with ecological migration features of swimming crabs,which were affected by the changing marine environment.This study could infer that it is applicable to study crab fishery or even other crustacean species using geostatistical analysis.It not only helps practitioners have a better understanding of how swimming crabs migrate from season to season,but also assists researchers in carrying out a more comprehensive assessment of the fishery.Therefore,it may facilitate advancing the implementation in the pilot quota management program of swimming crabs in northern Zhejiang fishing grounds.展开更多
The physiology and ecology of planktonic organisms are influenced by the concentration, chemical speciation and resulting bioavailability of some trace metals. The determination of the elemental structure of phytoplan...The physiology and ecology of planktonic organisms are influenced by the concentration, chemical speciation and resulting bioavailability of some trace metals. The determination of the elemental structure of phytoplankton is important for interpretation of physiological and functional states of coastal ecosystems. The present study is focused on the structure and elemental composition of the phytoplankton assemblages from the different coastal zones by instrumental neutron activation analysis (INAA), scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). For the first time these complementary techniques were simultaneously applied to study the Black Sea phytoplankton. The concentrations of 45 elements in the coastal phytoplankton communities used as bioindicator of inorganic contamination of the Black Sea coastal area near Sevastopol, Ukraine, were determined. Phytoplankton samples were collected by total tows of the plankton net with 35 μm pore size at 3 stations situated in polluted and relatively pristine water areas of the Sevastopol coastal zone during autumn period of the phytoplankton growth. The concentration of Mg, Al, Sc, Ti, V, Mn, As, Rb, Ba, Th and Fe, Cr increases exponentially from relatively pristine station to more polluted station and 10-times and 3-times greater, respectively, in the phytoplankton of the Sevastopol Bay. The rare-earth elements have relatively the same concentration values less than 1 μg/g and tend to accumulate in the phytoplankton from the polluted station in the Sevastopol Bay. The obtained results are in a good agreement with the elemental concentration data in the oceanic plankton, plankton communities from the White Sea and the Black Sea. Using energy-dispersive X-ray spectrometry the mineral particles of unknown origin and impurities of copper (0.42% by weight) in the phytoplankton at the polluted station and zinc (0.57% by weight) at the relatively pristine station were determined.展开更多
The error sources related to the laser rangefinder,GPS and INS are analyzed in details.Several coordinates systems used in airborne laser scanning are set up,and then the basic formula of system is given.This paper em...The error sources related to the laser rangefinder,GPS and INS are analyzed in details.Several coordinates systems used in airborne laser scanning are set up,and then the basic formula of system is given.This paper emphasizes on discussing the kinematic offset correction between GPS antenna phase center and laser fired point.And kinematic time delay influence on laser footprint position,the ranging errors,positioning errors,attitude errors and integration errors of the system are also explored.Finally,the result shows that the kinematic time delay can be neglected as compared with other error sources.The accuracy of the coordinates is not only influenced by the amplitude of the error,but also controlled by the operation parameters such as flight height,scanning angle amplitude and attitude magnitude of the platform.展开更多
By using CiteSpace software to create a knowledge map of authors,institutions and keywords,the literature on the spatio-temporal behavior of Chinese residents based on big data in the architectural planning discipline...By using CiteSpace software to create a knowledge map of authors,institutions and keywords,the literature on the spatio-temporal behavior of Chinese residents based on big data in the architectural planning discipline published in the China Academic Network Publishing Database(CNKI)was analyzed and discussed.It is found that there was a lack of communication and cooperation among research institutions and scholars;the research hotspots involved four main areas,including“application in tourism research”,“application in traffic travel research”,“application in work-housing relationship research”,and“application in personal family life research”.展开更多
The target motion analysis（TMA） for a moving scanning emitter with known fixed scan rate by a single observer using the time of interception（TOI） measurements only is investigated in this paper.By transforming the...The target motion analysis（TMA） for a moving scanning emitter with known fixed scan rate by a single observer using the time of interception（TOI） measurements only is investigated in this paper.By transforming the TOI of multiple scan cycles into the direction difference of arrival（DDOA） model,the observability analysis for the TMA problem is performed.Some necessary conditions for uniquely identifying the scanning emitter trajectory are obtained.This paper also proposes a weighted instrumental variable（WIV） estimator for the scanning emitter TMA,which does not require any initial solution guess and is closed-form and computationally attractive.More importantly,simulations show that the proposed algorithm can provide estimation mean square error close to the Cramer-Rao lower bound（CRLB） at moderate noise levels with significantly lower estimation bias than the conventional pseudo-linear least square（PLS） estimator.展开更多
<span style="font-family:Verdana;">Laser surface hardening is becoming one of the most successful heat treatment processes for improving wear and fatigue properties of steel parts. In this process, the...<span style="font-family:Verdana;">Laser surface hardening is becoming one of the most successful heat treatment processes for improving wear and fatigue properties of steel parts. In this process, the heating system parameters and the material properties have important effects on the achieved hardened surface characteristics. The control of these variables using predictive modeling strategies leads to the desired surface properties without following the fastidious trial and error method. However, when the dimensions of the surface to be treated are larger than the cross section of the laser beam, various laser scanning patterns can be used. Due to their effects on the hardened surface properties, the attributes of the selected scanning patterns become significant variables in the process. This paper presents numerical and experimental investigations of four scanning patterns for laser surface hardening of AISI 4340 steel. The investigations are based on exhaustive modelling and simulation efforts carried out using a 3D finite element thermal analysis and structured experimental study according to Taguchi method. The temperature distribution and the hardness profile attributes are used to evaluate the effects of heating parameters and patterns design parameters on the hardened surface characteristics. This is very useful for integrating the scanning patterns</span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">’</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> features in an efficient predictive modeling approach. A structured experimental design combined to improved statistical analysis tools </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">is</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> used</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> to</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> assess the 3D model performance. The experiments are performed on a 3 kW Nd:Yag laser system. The modeling results exhibit a great agreement between the predicted and measured values for the hardened surface characteristics. The model evaluation reveal</span></span></span><span><span><span>s </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">also its ability to provide not only accurate and robust predictions of the temperature distribution and the hardness profile as well an in-depth analysis of the effects of the process parameters.</span></span></span>展开更多
Five phospholipids in human placenta were determined by phosphorus 31 nuclear magnetic resonance(^(31)P NMR)spectroscopy and thin-layer chromatography(TLC) scanning combined with the corrective method of absorbance pr...Five phospholipids in human placenta were determined by phosphorus 31 nuclear magnetic resonance(^(31)P NMR)spectroscopy and thin-layer chromatography(TLC) scanning combined with the corrective method of absorbance proportional coefficient. The NMR spectrometer used this investigation was a Bruker AM-500 spectrometer operating at 202.4 MHz for ^(31)P chemical shifts are relative to 85% phosphoric acid. TIC was carried out by silica gel H plate developed in chloroform-methanol-glacial acetic acid-ethanol-water(25:4:6:2:0.5),with Vaskovsky reagent as colour -developing agent of phospholipids.展开更多
Spatio-temporal analysis of drought provides valuable information for drought management and damage mitigation. In this study, the Standardized Precipitation Index at the time scale of 6 months (SPI-6) is selected to ...Spatio-temporal analysis of drought provides valuable information for drought management and damage mitigation. In this study, the Standardized Precipitation Index at the time scale of 6 months (SPI-6) is selected to reflect drought conditions in the North-Eastern coastal region of Vietnam. The drought events and their characteristics from 1981 to 2019 are detected at 9 meteorological stations and 10 Chirps rainfall stations. The spatio-temporal variation of drought in the study region is analyzed on the basis of the number, duration, severity, intensity, and peak of the detected drought events at the 19 stations. The results show that from 1981 to 2019 the drought events mainly occurred with 1-season duration and moderate intensity and peak. The number, duration, severity, and peak of the drought events were the greatest in the period 2001-2010 and were the smallest in the period 2011-2019. Among the 19 stations, the drought duration tends to decrease at 11 stations, increase at 7 stations, and has a slight variant at 1 station;the drought severity tends to decrease at 14 stations, increase at 4 stations, and has not a significant trend at 1 station;the drought intensity tends to decrease at 17 stations, increase at 1 station, and has a slight variant at 1 station;and the drought peak tends to decrease at 18 stations and increase at 1 station.展开更多
Strong sensitivity of satellite microwave remote sensing to the change of surface dielectric properties,as well as the insensitivity to air pollution and solar illumination effects,makes it very suitable for monitorin...Strong sensitivity of satellite microwave remote sensing to the change of surface dielectric properties,as well as the insensitivity to air pollution and solar illumination effects,makes it very suitable for monitoring freeze-thaw conditions.The freeze-thaw cycle changes in the Qinghai-Xizang Plateau have an important impact on the ecological environment and infrastructure.Based on the Scanning Multi-channel Microwave Radiometer(SMMR)and other sensors of microwave satellite,the freeze-thaw cycle data of permafrost in the Qinghai-Xizang Plateau in the past 40 years from 1981 to 2020 was obtained.The changes of soil freeze-thaw conditions in different seasons of 2020 and in the same season of 1990,2000,2010 and 2020 were compared,and the annual variation trend of soil freeze-thaw area in the four years was analyzed.Further,the linear regression analysis was carried out on the duration of soil freezing/thawing/transition and the interannual variation trend under different area conditions from 1981 to 2020.The results show that the freeze-thaw changes in different years are similar.In winter,it is mainly frozen for about 110 days.Spring and autumn are transitional periods,lasting for 170 days.In summer,it is mainly thawed for about 80 days.From 1981 to 2020,the freezing period and the average freezing area of the Qinghai-Xizang Plateau decreased at a rate of 0.22 days and 1986 km^(2) per year,respectively,while the thawing period and the average thawing area increased at a rate of 0.07 days and 3187 km^(2) per year,respectively.The research results provide important theoretical support for the ecological environment and permafrost protection of the Qinghai-Xizang Plateau.展开更多
Three-dimensional printing(3DP)offers valuable insight into the characterization of natural rocks and the verification of theoretical models due to its high reproducibility and accurate replication of complex defects ...Three-dimensional printing(3DP)offers valuable insight into the characterization of natural rocks and the verification of theoretical models due to its high reproducibility and accurate replication of complex defects such as cracks and pores.In this study,3DP gypsum samples with different printing directions were subjected to a series of uniaxial compression tests with in situ micro-computed tomography(micro-CT)scanning to quantitatively investigate their mechanical anisotropic properties and damage evolution characteristics.Based on the two-dimensional(2D)CT images obtained at different scanning steps,a novel void ratio variable was derived using the mean value and variance of CT intensity.Additionally,a constitutive model was formulated incorporating the proposed damage variable,utilizing the void ratio variable.The crack evolution and crack morphology of 3DP gypsum samples were obtained and analyzed using the 3D models reconstructed from the CT images.The results indicate that 3DP gypsum samples exhibit mechanical anisotropic characteristics similar to those found in naturally sedimentary rocks.The mechanical anisotropy is attributed to the bedding planes formed between adjacent layers and pillar-like structures along the printing direction formed by CaSO_(4)·2H_(2)O crystals of needle-like morphology.The mean gray intensity of the voids has a positive linear relationship with the threshold value,while the CT variance and void ratio have concave and convex relationships,respectively.The constitutive model can effectively match the stress–strain curves obtained from uniaxial compression experiments.This study provides comprehensive explanations of the failure modes and anisotropic mechanisms of 3DP gypsum samples,which is important for characterizing and understanding the failure mechanism and microstructural evolution of 3DP rocks when modeling natural rock behavior.展开更多
A feature extraction method was proposed to sectorial scan image of Ti-6Al-4V electron beam welding seam based on principal component analysis to solve problem of high-dimensional data resulting in timeconsuming in de...A feature extraction method was proposed to sectorial scan image of Ti-6Al-4V electron beam welding seam based on principal component analysis to solve problem of high-dimensional data resulting in timeconsuming in defect recognition. Seven features were extracted from the image and represented 87. 3% information of the original data. Both the extracted features and the original data were used to train support vector machine model to assess the feature extraction performance in two aspects: recognition accuracy and training time. The results show that using the extracted features the recognition accuracy of pore,crack,lack of fusion and lack of penetration are 93%,90.7%,94.7% and 89.3%,respectively,which is slightly higher than those using the original data. The training time of the models using the extracted features is extremely reduced comparing with those using the original data.展开更多
Objective: to explore the guiding significance and related predictive factors of head movement in children with mild craniocerebral injury after operation. Methods: 68 children were examined for major soft trauma, and...Objective: to explore the guiding significance and related predictive factors of head movement in children with mild craniocerebral injury after operation. Methods: 68 children were examined for major soft trauma, and all children were scanned with CT. To observe the CT positive status of children's head and the operation of Neurosurgery (NSP), record the treatment intervention, diagnostic intervention and death of CT positive children, and analyze the relationship between CT positive and NSP. The CT results of 68 children were 26 cases, accounting for 30.24%. In addition, ns10 was completed in 10 cases, accounting for 14.71%.22 cases (32.35%) used treatment intervention, 46 cases (67.65%) used diagnostic intervention. Two children died of CT positive, accounting for 7.69%.There was significant difference between positive TCC and DSN in children with different gender, age and injury cause (P < 0.05).Male, age ≥ 6 years old, fall injury is closely related to TNT positive and PSN. Conclusion: CT head scan has certain guiding significance for the operation of children with minor head injury. Male, age ≥ 6 years old and autumn injury may be important predictors of NSP treatment in children with mild head injury. Based on the above characteristics, we can determine which groups of children with minor head injuries can benefit from intake and NSP treatment, which can provide a basis for clinical diagnosis and treatment.展开更多
基金supported by Independent Research Project of State Key Laboratory of Advanced Special Steel,Shanghai Key Laboratory of Advanced Ferrometallurgy,Shanghai University(SKLASS-2023-Z13)the Science and Technology Commission of Shanghai Municipality(No.19DZ2270200)+1 种基金A portion of the work was performed at US National High Magnetic Field Laboratory,which is supported by the National Science Foundation(Cooperative Agreement No.DMR-1157490 and DMR-1644779)the State of Florida.Thanks also to Mary Tyler for editing.
文摘The high-temperature dissolution behavior of primary carbides in samples taken from GCr15 continuous-casting bloom was observed in-situ by confocal laser scanning microscopy.Equations were fitted to the dissolution kinetics of primary carbides during either heating or soaking.Dissolution of carbides proceeded in three stages(fast→slow→faster)as either temperature or holding time was increased.During the heating process and during the first and third stages of the soaking process,the original size of the carbides determined the steepness of the slope,but during the middle(“slow”)stage of the soaking process,the slope remained zero.The initial size of the carbides varied greatly,but their final dissolution temperature fell within the narrow range of 1210-1235℃,and the holding time remained within 50 min.Fractal analysis was used to study the morphological characteristics of small and medium-sized carbides during the dissolution process.According to changes in the fractal dimension before and after soaking,the carbides tended to evolve towards a more regular morphology.
基金Supported by the National Natural Science Foundation of China （40971275, 50811120111）
文摘Based on spatio-temporal correlativity analysis method, the automatic identification techniques for data anomaly monitoring of coal mining working face gas are presented. The asynchronous correlative characteristics of gas migration in working face airflow direction are qualitatively analyzed. The calculation method of asynchronous correlation delay step and the prediction and inversion formulas of gas concentration changing with time and space after gas emission in the air return roadway are provided. By calculating one hundred and fifty groups of gas sensors data series from a coal mine which have the theoretical correlativity, the correlative coefficient values range of eight kinds of data anomaly is obtained. Then the gas moni- toring data anomaly identification algorithm based on spatio-temporal correlativity analysis is accordingly presented. In order to improve the efficiency of analysis, the gas sensors code rules which can express the spatial topological relations are sug- gested. The experiments indicate that methods presented in this article can effectively compensate the defects of methods based on a single gas sensor monitoring data.
文摘Development of reaction-tailored electrocatalysts is becoming increasingly important as energy and environment are among key issues governing our sustainable future.Electrocatalysts are inherently optimized for application towards reactions of interest in renewable energy,such as those involved in water splitting and artificial photosynthesis,owing to its energy efficiency,simple fabrication,and ease of operation.In this view,it is important to secure logical design principles for the synthesis of electrocatalysts for various reactions of interest,and also understand their catalytic mechanisms in the respective reactions for improvements in further iterations.In this review,we introduce several key methods of scanning electrochemical microscopy(SECM)in its applications towards electrocatalysis.A brief history and a handful of seminal works in the SECM field is introduced in advancing the synthetic designs of electrocatalysts and elucidation of the operating mechanism.New developments in nano-sizing of the electrodes in attempts for improved spatial resolution of SECM is also introduced,and the application of nanoelectrodes towards the investigation of formerly inaccessible single catalytic entities is shared.
基金National Key Research and Development Plan of China (No.2019YFB1706300)Shanghai Frontier Science Research Center for Modern Textiles (Donghua University),China。
文摘In the process of logistics distribution of manufacturing enterprises, the automatic scheduling method based on the algorithm model has the advantages of accurate calculation and stable operation, but it excessively relies on the results of data calculation, ignores historical information and empirical data in the solving process, and has the bottleneck of low processing dimension and small processing scale. Therefore, in the digital twin(DT) system based on virtual and real fusion, a modeling and analysis method of production logistics spatio-temporal graph network model is proposed, considering the characteristics of road network topology and time-varying data. In the DT system, the temporal graph network model of the production logistics task is established and combined with the network topology, and the historical scheduling information about logistics elements is stored in the nodes. When the dynamic task arrives, a multi-stage links probability prediction method is adopted to predict the possibility of loading, driving, and other link relationships between task-related entity nodes at each stage. Several experiments are carried out, and the prediction accuracy of the digital twin-based temporal graph network(DTGN) model trained by historical scheduling information reaches 99.2% when the appropriate batch size is selected. Through logistics simulation experiments, the feasibility and the effectiveness of production logistics spatio-temporal graph network analysis methods based on historical scheduling information are verified.
文摘Introduction: Colorectal cancer(CRC) is a common type of neoplasm. This study examined the spatio?temporal distribution of the CRC incidence in Guangzhou during 2010–2014.Methods: Colorectal cancer incidence data were obtained from the Guangzhou Cancer Registry System. Spatial autocorrelation analysis and a retrospective spatio?temporal scan were used to assess the spatio?temporal cluster distribution of CRC cases.Results: A total of 14,618 CRC cases were registered in Guangzhou during 2010–2014, with a crude incidence of 35.56/100,000 and an age?standardized rate of incidence by the world standard population(ASRIW) of 23.58/100,000. The crude incidence increased by 19.70% from 2010(32.88/100,000) to 2014(39.36/100,000) with an average annual percentage change(AAPC) of 4.33%. The AAPC of ASRIW was not statistically significant. The spatial autocorrelation analysis revealed a CRC incidence hot spot in central urban areas in Guangzhou City, which included 25 streets in southwestern Baiyun District, northwestern Haizhu District, and the border region between Liwan and Yuexiu Dis?tricts. Three high? and five low?incidence clusters were identified according to spatio?temporal scan of CRC incidence clusters. The high?incidence clusters were located in central urban areas including the border regions between Bai?yun, Haizhu, Liwan, and Yuexiu Districts.Conclusions: This study revealed the spatio?temporal cluster pattern of the incidence of CRC in Guangzhou. This information can inform allocation of health resources for CRC screening.
基金The National Key Research and Development Program of China under contract No.2018YFA0605403the National Natural Science Foundation of China under contract No.42071084Jiangyuan Zeng was supported by the Youth Innovation Promotion Association CAS under contract No.2018082。
文摘The melt onset dates(MOD)over Arctic sea ice plays an important role in the seasonal cycle of sea ice surface properties,which impacts Arctic surface solar radiation absorbed by the ice-ocean system.Monitoring interannual variations in MOD is valuable for understanding climate change.In this study,we investigated the spatio-temporal variability of MOD over Arctic sea ice and 14 Arctic sub-regions in the period of 1979 to 2017 from passive microwave satellite data.A set of mathematical and statistical methods,including the Sen’s slope and Mann-Kendall mutation tests,were used to comprehensively assess the variation trend and abrupt points of MOD during the past 39 years for different Arctic sub-regions.Additionally,the correlation between Arctic Oscillation(AO)and MOD was analyzed.The results indicate that:(1)all Arctic sub-regions show a trend toward earlier MOD except the Bering Sea and St.Lawrence Gulf.The East Siberian Sea exhibits a significantly earlier trend,with the highest rate of-9.45 d/decade;(2)the temporal variability and statistical significance of MOD trend exhibit large interannual differences with different time windows for most regions in the Arctic;(3)during the past 39 years,the MOD changed abruptly in different years for different sub-regions;(4)the seasonal AO has more influence on MOD than monthly AO.The findings in this study can improve our knowledge of MOD changes and are beneficial for further Arctic climate change study.
基金supported by the Institute of Information&Communications Technology Planning&Evaluation(IITP)grant funded by the Korea Government(MSIT)(No.2020-0-00952)Development of 5G edge security technology for ensuring 5G+service stability and availability.
文摘Container technology plays an essential role in many Information and Communications Technology(ICT)systems.However,containers face a diversity of threats caused by vulnerable packages within container images.Previous vulnerability scanning solutions for container images are inadequate.These solutions entirely depend on the information extracted from package managers.As a result,packages installed directly from the source code compilation,or packages downloaded from the repository,etc.,are ignored.We introduce DAVS–A Dockerfile analysis-based vulnerability scanning framework for OCI-based container images to deal with the limitations of existing solutions.DAVS performs static analysis using file extraction based on Dockerfile information to obtain the list of Potentially Vulnerable Files(PVFs).The PVFs are then scanned to figure out the vulnerabilities in the target container image.The experimental shows the outperform of DAVS on detecting Common Vulnerabilities and Exposures(CVE)of 10 known vulnerable images compared to Clair–the most popular container image scanning project.Moreover,DAVS found that 68%of real-world container images are vulnerable from different image registries.
文摘This study attempted to compare the performance of local polynomial interpolation,inverse distance weighted interpolation,and ordinary kriging in studying distribution patterns of swimming crabs.Cross-validation was used to select the optimum method to get distribution results,and kriging was used for making spatial variability analysis.Data were collected from 87 sampling stations in November of 2015(autumn)and February(winter),May(spring)and August(summer)of 2016.Results indicate that swimming crabs widely distributed in autumn and summer:in the summer,they were more spatially independent,and resources in each sampling station varied a lot;in the winter and spring,the abundance of crabs was much lower,but the individual crab size was bigger,and they showed the patchy and more concentrative distribution pattern,which means they were more spatially dependent.Distribution patterns were in accordance with ecological migration features of swimming crabs,which were affected by the changing marine environment.This study could infer that it is applicable to study crab fishery or even other crustacean species using geostatistical analysis.It not only helps practitioners have a better understanding of how swimming crabs migrate from season to season,but also assists researchers in carrying out a more comprehensive assessment of the fishery.Therefore,it may facilitate advancing the implementation in the pilot quota management program of swimming crabs in northern Zhejiang fishing grounds.
文摘The physiology and ecology of planktonic organisms are influenced by the concentration, chemical speciation and resulting bioavailability of some trace metals. The determination of the elemental structure of phytoplankton is important for interpretation of physiological and functional states of coastal ecosystems. The present study is focused on the structure and elemental composition of the phytoplankton assemblages from the different coastal zones by instrumental neutron activation analysis (INAA), scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). For the first time these complementary techniques were simultaneously applied to study the Black Sea phytoplankton. The concentrations of 45 elements in the coastal phytoplankton communities used as bioindicator of inorganic contamination of the Black Sea coastal area near Sevastopol, Ukraine, were determined. Phytoplankton samples were collected by total tows of the plankton net with 35 μm pore size at 3 stations situated in polluted and relatively pristine water areas of the Sevastopol coastal zone during autumn period of the phytoplankton growth. The concentration of Mg, Al, Sc, Ti, V, Mn, As, Rb, Ba, Th and Fe, Cr increases exponentially from relatively pristine station to more polluted station and 10-times and 3-times greater, respectively, in the phytoplankton of the Sevastopol Bay. The rare-earth elements have relatively the same concentration values less than 1 μg/g and tend to accumulate in the phytoplankton from the polluted station in the Sevastopol Bay. The obtained results are in a good agreement with the elemental concentration data in the oceanic plankton, plankton communities from the White Sea and the Black Sea. Using energy-dispersive X-ray spectrometry the mineral particles of unknown origin and impurities of copper (0.42% by weight) in the phytoplankton at the polluted station and zinc (0.57% by weight) at the relatively pristine station were determined.
基金Funded by the National Natural Science Foundation of China(No.40004001)
文摘The error sources related to the laser rangefinder,GPS and INS are analyzed in details.Several coordinates systems used in airborne laser scanning are set up,and then the basic formula of system is given.This paper emphasizes on discussing the kinematic offset correction between GPS antenna phase center and laser fired point.And kinematic time delay influence on laser footprint position,the ranging errors,positioning errors,attitude errors and integration errors of the system are also explored.Finally,the result shows that the kinematic time delay can be neglected as compared with other error sources.The accuracy of the coordinates is not only influenced by the amplitude of the error,but also controlled by the operation parameters such as flight height,scanning angle amplitude and attitude magnitude of the platform.
文摘By using CiteSpace software to create a knowledge map of authors,institutions and keywords,the literature on the spatio-temporal behavior of Chinese residents based on big data in the architectural planning discipline published in the China Academic Network Publishing Database(CNKI)was analyzed and discussed.It is found that there was a lack of communication and cooperation among research institutions and scholars;the research hotspots involved four main areas,including“application in tourism research”,“application in traffic travel research”,“application in work-housing relationship research”,and“application in personal family life research”.
基金co-supported by the Shanghai Aerospace Science and Technology Innovation Fund of China(No.SAST2015028)the Equipment Prophecy Fund of China(No.9140A21040115KG01001)
文摘The target motion analysis（TMA） for a moving scanning emitter with known fixed scan rate by a single observer using the time of interception（TOI） measurements only is investigated in this paper.By transforming the TOI of multiple scan cycles into the direction difference of arrival（DDOA） model,the observability analysis for the TMA problem is performed.Some necessary conditions for uniquely identifying the scanning emitter trajectory are obtained.This paper also proposes a weighted instrumental variable（WIV） estimator for the scanning emitter TMA,which does not require any initial solution guess and is closed-form and computationally attractive.More importantly,simulations show that the proposed algorithm can provide estimation mean square error close to the Cramer-Rao lower bound（CRLB） at moderate noise levels with significantly lower estimation bias than the conventional pseudo-linear least square（PLS） estimator.
文摘<span style="font-family:Verdana;">Laser surface hardening is becoming one of the most successful heat treatment processes for improving wear and fatigue properties of steel parts. In this process, the heating system parameters and the material properties have important effects on the achieved hardened surface characteristics. The control of these variables using predictive modeling strategies leads to the desired surface properties without following the fastidious trial and error method. However, when the dimensions of the surface to be treated are larger than the cross section of the laser beam, various laser scanning patterns can be used. Due to their effects on the hardened surface properties, the attributes of the selected scanning patterns become significant variables in the process. This paper presents numerical and experimental investigations of four scanning patterns for laser surface hardening of AISI 4340 steel. The investigations are based on exhaustive modelling and simulation efforts carried out using a 3D finite element thermal analysis and structured experimental study according to Taguchi method. The temperature distribution and the hardness profile attributes are used to evaluate the effects of heating parameters and patterns design parameters on the hardened surface characteristics. This is very useful for integrating the scanning patterns</span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">’</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> features in an efficient predictive modeling approach. A structured experimental design combined to improved statistical analysis tools </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">is</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> used</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> to</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> assess the 3D model performance. The experiments are performed on a 3 kW Nd:Yag laser system. The modeling results exhibit a great agreement between the predicted and measured values for the hardened surface characteristics. The model evaluation reveal</span></span></span><span><span><span>s </span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">also its ability to provide not only accurate and robust predictions of the temperature distribution and the hardness profile as well an in-depth analysis of the effects of the process parameters.</span></span></span>
文摘Five phospholipids in human placenta were determined by phosphorus 31 nuclear magnetic resonance(^(31)P NMR)spectroscopy and thin-layer chromatography(TLC) scanning combined with the corrective method of absorbance proportional coefficient. The NMR spectrometer used this investigation was a Bruker AM-500 spectrometer operating at 202.4 MHz for ^(31)P chemical shifts are relative to 85% phosphoric acid. TIC was carried out by silica gel H plate developed in chloroform-methanol-glacial acetic acid-ethanol-water(25:4:6:2:0.5),with Vaskovsky reagent as colour -developing agent of phospholipids.
文摘Spatio-temporal analysis of drought provides valuable information for drought management and damage mitigation. In this study, the Standardized Precipitation Index at the time scale of 6 months (SPI-6) is selected to reflect drought conditions in the North-Eastern coastal region of Vietnam. The drought events and their characteristics from 1981 to 2019 are detected at 9 meteorological stations and 10 Chirps rainfall stations. The spatio-temporal variation of drought in the study region is analyzed on the basis of the number, duration, severity, intensity, and peak of the detected drought events at the 19 stations. The results show that from 1981 to 2019 the drought events mainly occurred with 1-season duration and moderate intensity and peak. The number, duration, severity, and peak of the drought events were the greatest in the period 2001-2010 and were the smallest in the period 2011-2019. Among the 19 stations, the drought duration tends to decrease at 11 stations, increase at 7 stations, and has a slight variant at 1 station;the drought severity tends to decrease at 14 stations, increase at 4 stations, and has not a significant trend at 1 station;the drought intensity tends to decrease at 17 stations, increase at 1 station, and has a slight variant at 1 station;and the drought peak tends to decrease at 18 stations and increase at 1 station.
基金National Natural Science foundation of China(No.42271432)Foundation of Shanxi Vocational University of Engineering Science and Technology(No.KJ 202426).
文摘Strong sensitivity of satellite microwave remote sensing to the change of surface dielectric properties,as well as the insensitivity to air pollution and solar illumination effects,makes it very suitable for monitoring freeze-thaw conditions.The freeze-thaw cycle changes in the Qinghai-Xizang Plateau have an important impact on the ecological environment and infrastructure.Based on the Scanning Multi-channel Microwave Radiometer(SMMR)and other sensors of microwave satellite,the freeze-thaw cycle data of permafrost in the Qinghai-Xizang Plateau in the past 40 years from 1981 to 2020 was obtained.The changes of soil freeze-thaw conditions in different seasons of 2020 and in the same season of 1990,2000,2010 and 2020 were compared,and the annual variation trend of soil freeze-thaw area in the four years was analyzed.Further,the linear regression analysis was carried out on the duration of soil freezing/thawing/transition and the interannual variation trend under different area conditions from 1981 to 2020.The results show that the freeze-thaw changes in different years are similar.In winter,it is mainly frozen for about 110 days.Spring and autumn are transitional periods,lasting for 170 days.In summer,it is mainly thawed for about 80 days.From 1981 to 2020,the freezing period and the average freezing area of the Qinghai-Xizang Plateau decreased at a rate of 0.22 days and 1986 km^(2) per year,respectively,while the thawing period and the average thawing area increased at a rate of 0.07 days and 3187 km^(2) per year,respectively.The research results provide important theoretical support for the ecological environment and permafrost protection of the Qinghai-Xizang Plateau.
基金supported by grants from the Human Resources Development program(Grant No.20204010600250)the Training Program of CCUS for the Green Growth(Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government(MOTIE).
文摘Three-dimensional printing(3DP)offers valuable insight into the characterization of natural rocks and the verification of theoretical models due to its high reproducibility and accurate replication of complex defects such as cracks and pores.In this study,3DP gypsum samples with different printing directions were subjected to a series of uniaxial compression tests with in situ micro-computed tomography(micro-CT)scanning to quantitatively investigate their mechanical anisotropic properties and damage evolution characteristics.Based on the two-dimensional(2D)CT images obtained at different scanning steps,a novel void ratio variable was derived using the mean value and variance of CT intensity.Additionally,a constitutive model was formulated incorporating the proposed damage variable,utilizing the void ratio variable.The crack evolution and crack morphology of 3DP gypsum samples were obtained and analyzed using the 3D models reconstructed from the CT images.The results indicate that 3DP gypsum samples exhibit mechanical anisotropic characteristics similar to those found in naturally sedimentary rocks.The mechanical anisotropy is attributed to the bedding planes formed between adjacent layers and pillar-like structures along the printing direction formed by CaSO_(4)·2H_(2)O crystals of needle-like morphology.The mean gray intensity of the voids has a positive linear relationship with the threshold value,while the CT variance and void ratio have concave and convex relationships,respectively.The constitutive model can effectively match the stress–strain curves obtained from uniaxial compression experiments.This study provides comprehensive explanations of the failure modes and anisotropic mechanisms of 3DP gypsum samples,which is important for characterizing and understanding the failure mechanism and microstructural evolution of 3DP rocks when modeling natural rock behavior.
基金Sponsored by the National Natural Science Foundation of China(Grant Nos.51575134 and 51205083)
文摘A feature extraction method was proposed to sectorial scan image of Ti-6Al-4V electron beam welding seam based on principal component analysis to solve problem of high-dimensional data resulting in timeconsuming in defect recognition. Seven features were extracted from the image and represented 87. 3% information of the original data. Both the extracted features and the original data were used to train support vector machine model to assess the feature extraction performance in two aspects: recognition accuracy and training time. The results show that using the extracted features the recognition accuracy of pore,crack,lack of fusion and lack of penetration are 93%,90.7%,94.7% and 89.3%,respectively,which is slightly higher than those using the original data. The training time of the models using the extracted features is extremely reduced comparing with those using the original data.
文摘Objective: to explore the guiding significance and related predictive factors of head movement in children with mild craniocerebral injury after operation. Methods: 68 children were examined for major soft trauma, and all children were scanned with CT. To observe the CT positive status of children's head and the operation of Neurosurgery (NSP), record the treatment intervention, diagnostic intervention and death of CT positive children, and analyze the relationship between CT positive and NSP. The CT results of 68 children were 26 cases, accounting for 30.24%. In addition, ns10 was completed in 10 cases, accounting for 14.71%.22 cases (32.35%) used treatment intervention, 46 cases (67.65%) used diagnostic intervention. Two children died of CT positive, accounting for 7.69%.There was significant difference between positive TCC and DSN in children with different gender, age and injury cause (P < 0.05).Male, age ≥ 6 years old, fall injury is closely related to TNT positive and PSN. Conclusion: CT head scan has certain guiding significance for the operation of children with minor head injury. Male, age ≥ 6 years old and autumn injury may be important predictors of NSP treatment in children with mild head injury. Based on the above characteristics, we can determine which groups of children with minor head injuries can benefit from intake and NSP treatment, which can provide a basis for clinical diagnosis and treatment.
