Based on the principle of thermal conduction, three metal alloys （stainless steel, copper-tungsten and graphite） were chosen as the material of the high impulse current discharging switch. Experimental results indic...Based on the principle of thermal conduction, three metal alloys （stainless steel, copper-tungsten and graphite） were chosen as the material of the high impulse current discharging switch. Experimental results indicate that the mass loss and surface erosion morphology of the electrode are related with the electrode material （conductivity σ, melting point Tin, density p and thermal capacity c） and the impulse transferred charge （or energy） per impulse for the same total impulse transferred charge. The experimental results indicate that the mass loss of stainless steel, copper-tungsten and graphite are 380.10 μg/C, 118.10 μg/C and 81.90 μg/C respectively under the condition of a total impulse transferred charge of 525 C and a transferred charge per impulse of 10.5 C. Under the same impulse transferred charge, the mass loss of copper-tungsten（118.10 μg/C） with the transferred charge per impulse at 10.5 C is far larger than the mass loss （38.61μg/C） at a 1.48 C transferred charge per impulse. The electrode erosion mechanism under high energy impulse arcs is analyzed briefly and it is suggested that by selecting high conductive metal or metal alloy as the electrode material of a high energy impulse spark gap switch and setting high erosion resistance material at the top of the electrode, the mass loss of the electrode can be reduced and the life of the switch prolonged.展开更多
A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high vol...A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high voltage electrodes with a uniform gap length of 5 ram. The self breakdown and triggered breakdown performance of the switch are reported. Both the delay time and jitter decrease with the increase in the trigger voltage, switching coefficient and the decrease in the trigger isolating resistor. The delay time of the switch is about 40 ns, and the jitter is less than 2 ns when charged with 4-85 kV and triggered by a voltage pule of -75 kV. The inductance of the switch is about 30 nH.展开更多
A metal foil spark gap switch is fabricated by using magnetron sputtering deposition technology and standard microelectronic technology. The switch has two main electrodes and a trigger electrode. Stylus profiler is e...A metal foil spark gap switch is fabricated by using magnetron sputtering deposition technology and standard microelectronic technology. The switch has two main electrodes and a trigger electrode. Stylus profiler is employed to measure the distance between the main electrodes and the dimensions of the trigger electrode. The discharge characteristics of the metal foil spark gap switch are discussed. The switch has short delay time and low time jitter. When it is fired by a conventional capacitive discharge unit (CDU), the firing circuit has low inductance and resistance. Because of its low profile structure, it can be easily integrated with the bridge foil used in a conventional exploding foil initiator system (EFIS).展开更多
文摘Based on the principle of thermal conduction, three metal alloys （stainless steel, copper-tungsten and graphite） were chosen as the material of the high impulse current discharging switch. Experimental results indicate that the mass loss and surface erosion morphology of the electrode are related with the electrode material （conductivity σ, melting point Tin, density p and thermal capacity c） and the impulse transferred charge （or energy） per impulse for the same total impulse transferred charge. The experimental results indicate that the mass loss of stainless steel, copper-tungsten and graphite are 380.10 μg/C, 118.10 μg/C and 81.90 μg/C respectively under the condition of a total impulse transferred charge of 525 C and a transferred charge per impulse of 10.5 C. Under the same impulse transferred charge, the mass loss of copper-tungsten（118.10 μg/C） with the transferred charge per impulse at 10.5 C is far larger than the mass loss （38.61μg/C） at a 1.48 C transferred charge per impulse. The electrode erosion mechanism under high energy impulse arcs is analyzed briefly and it is suggested that by selecting high conductive metal or metal alloy as the electrode material of a high energy impulse spark gap switch and setting high erosion resistance material at the top of the electrode, the mass loss of the electrode can be reduced and the life of the switch prolonged.
基金supported by National Natural Science Foundation of China(Nos.50477019,50637010)the State Key Laboratory of Electrical Insulation and Power Equipment of China(EIPE.09207)
文摘A multi-gap and multi-channel gas switch with convexo-convex discal planet electrodes was designed and investigated. Eight gaps are formed in series by a trigger electrode, six intermediate electrodes and two high voltage electrodes with a uniform gap length of 5 ram. The self breakdown and triggered breakdown performance of the switch are reported. Both the delay time and jitter decrease with the increase in the trigger voltage, switching coefficient and the decrease in the trigger isolating resistor. The delay time of the switch is about 40 ns, and the jitter is less than 2 ns when charged with 4-85 kV and triggered by a voltage pule of -75 kV. The inductance of the switch is about 30 nH.
文摘A metal foil spark gap switch is fabricated by using magnetron sputtering deposition technology and standard microelectronic technology. The switch has two main electrodes and a trigger electrode. Stylus profiler is employed to measure the distance between the main electrodes and the dimensions of the trigger electrode. The discharge characteristics of the metal foil spark gap switch are discussed. The switch has short delay time and low time jitter. When it is fired by a conventional capacitive discharge unit (CDU), the firing circuit has low inductance and resistance. Because of its low profile structure, it can be easily integrated with the bridge foil used in a conventional exploding foil initiator system (EFIS).
