The active sound absorption technique excels in mitigating low-frequency sound waves,yet it falls short when dealing with medium and high-frequency sound waves.To enhance the sound-absorbing effect of medium and high-...The active sound absorption technique excels in mitigating low-frequency sound waves,yet it falls short when dealing with medium and high-frequency sound waves.To enhance the sound-absorbing effect of medium and high-frequency sound waves,a novel semi-active sound absorption method has been introduced.This method modulates the surface impedance of a loudspeaker positioned behind the sound-absorbing material,thereby altering the sound absorption coefficient.The theoretical sound absorption coefficient is calculated using MATLAB and compared with the experimental one.Results show that the method can effectively modulates the absorption coefficient in response to varying incident sound wave frequencies,ensuring that it remains at its peak value.展开更多
As electromagnetic pollution escalates and protection demands diversify,there is an urgent requirement for versatile carbon foam materials capable of absorbing electromagnetic waves(EMWs).Furthermore,the concern about...As electromagnetic pollution escalates and protection demands diversify,there is an urgent requirement for versatile carbon foam materials capable of absorbing electromagnetic waves(EMWs).Furthermore,the concern about global warming and the depletion of petrochemical resources calls for facile and eco-friendly methods for the large-scale production of multi-functional and biodegradable carbon foams.Herein,cornstraw-derived carbon foams(CCFs)integrating EMW absorption,sound absorption,and heat insulation were prepared by a facile dual-template strategy.Benefiting from the dual-template effect of air bubbles and ice crystals,the obtained foam manifests an ultra-low density of 31 mg/cm^(3),large poros-ity of 0.85 and also super-broad absorption with an effective absorption bandwidth(EAB)of 7.18 GHz at 3.6 mm,even beyond most carbon-based composite foams.Moreover,abundant pores also endow the foam with good thermal insulation performance(as low as 0.041 W/(m K))and high sound absorp-tion coefficient(0.8 at 1250-6000 Hz),which are equivalent to commercial foams.The excellent EMW absorption performance originates from conduction loss produced by the three-dimensional(3D)inter-connected network structure and also interfacial polarization and multiple scattering induced by porous structure.Additionally,the abundant closed pores in foam prevent thermal convection and thus provide good thermal-insulation performance,yet the opening pores proffer excellent sound absorption through resonance and friction absorption.This study provides new insights into the green synthesis of multi-functional microwave absorbing foam and also supplies a new thermal-insulation material for exterior walls of buildings exposed to electromagnetic environment.展开更多
An inverse vulcanized polymer,SZIM combining Zn2+-imidazole coordination bonds and polysulfide bonds was synthesized and incorporated into bio-based Eucommia ulmoides gum (EUG) to generate EUG-SZIM-xs.The residual cry...An inverse vulcanized polymer,SZIM combining Zn2+-imidazole coordination bonds and polysulfide bonds was synthesized and incorporated into bio-based Eucommia ulmoides gum (EUG) to generate EUG-SZIM-xs.The residual crystallinity of the EUG matrix synergistically interacted with the dual cross-linking networks to establish reversible deformation domains,providing EUG-SZIM-xs with quick shape memory capability at moderate temperatures.The damping properties were also investigated,and EUG-SZIM-xs displayed high tanδ values (>0.3) when the SZIM dosage was higher than 5.5 phr,which showed a positive correlation with SZIM concentration.Such good damping performance endowed the EUG-SZIM-xs with broadband low-frequency sound absorption.In addition,the dual cross-linking networks endowed the materials with reprocessability under different catalytic systems,and the 1,8-diazobicyclic[5.4.0]undeca-7-ene (DBU)-catalyzed samples exhibited better mechanical properties than EUG-SZIM-xs.展开更多
To minimize the calculation errors in the sound absorption coefficient resulting from inaccurate measurements of flow resistivity,a simple method for determining the sound absorption coefficient of soundabsorbing mate...To minimize the calculation errors in the sound absorption coefficient resulting from inaccurate measurements of flow resistivity,a simple method for determining the sound absorption coefficient of soundabsorbing materials is proposed.Firstly,the sound absorption coefficients of a fibrous sound-absorbing material are measured at two different frequencies using the impedance tube method.Secondly,utilizing the empirical formulas for the wavenumber and acoustic impedance in the fibrous material,the flow resistivity and porosity of the sound-absorbing materials are calculated using the MATLAB cycle program.Thirdly,based on the values obtained through reverse calculations,the sound absorption coefficient,the real and the imaginary parts of the acoustic impedance of the sound-absorbing material at different frequencies are theoretically computed.Finally,the accuracy of these theoretical calculations is verified through experiments.The experimental results indicate that the calculated values are basically consistent with the measured values,demonstrating the feasibility and reliability of this method.展开更多
The sound absorption coefficients of wood and wood boards for five eucalypt species (Eucalyptus urophylla, Euca-lyptus urophylla E. grandis, Eucalyptus urophylla E. tereticornis, Eucalyptus urophylla E. camaldulensis ...The sound absorption coefficients of wood and wood boards for five eucalypt species (Eucalyptus urophylla, Euca-lyptus urophylla E. grandis, Eucalyptus urophylla E. tereticornis, Eucalyptus urophylla E. camaldulensis and Eucalyptus cloeziana) that were collected from plantation in Dongmen Forestry Center of Guangxi Province, China were tested with stand-ing wave method and their sound absorption properties were also compared. The results showed that the sound absorption co-efficients of the five eucalypt wood species did not change evidently below 1000 Hz, but above 1000 Hz their sound absorption coefficients increased with the increasing frequency. The difference in sound absorption coefficient among five species of eucalypt wood is not evident at the tested frequency range (200-2000 Hz), but the sound absorption property of Eucalyptus urophylla at low frequency is better than that of other four species. The sound absorption coefficient of the tangential-sawn board is higher than that of the radial-sawn board. The sound absorption property of eucalypt wood of 0.5 cm in thickness is much better than that of 1.0 cm in thickness. It is concluded that wood sound absorption properties of eucalypts are affected by their board thickness and the type of sawn timber within the testing frequency, but the variance of wood sound absorption property among the five tested species is not significant.展开更多
Based on sound absorption mechanism of material,the special sound absorption material CEMCOM for road sound insulation is introduced.This high sound absorption material is mainly composed of expanded perlite.Using mul...Based on sound absorption mechanism of material,the special sound absorption material CEMCOM for road sound insulation is introduced.This high sound absorption material is mainly composed of expanded perlite.Using multiple sound absorption structure can improve sound absorption property of material.According to the preparation principle and durability design of material,a new kind of material with low cost and high durability is developed.展开更多
Commercial3D reticular nickel foam and its composite structure were investigated on the sound absorption at200-2000Hz.The absorption performance of foam plates1?5layers(1-layer thickness:2.3mm;porosity:89%;average por...Commercial3D reticular nickel foam and its composite structure were investigated on the sound absorption at200-2000Hz.The absorption performance of foam plates1?5layers(1-layer thickness:2.3mm;porosity:89%;average pore-diameter:0.57mm)was found to be poor,and could be improved by adding backed cavum or front perforated thin sheet.The absorption coefficient could reach about0.4at1000-1600Hz for the composite structure of5-layer foam with a backed5mm-thick cavum,and even0.68at about1000Hz for that of2-layer foam with the same cavum and a perforated plate closely in front of the foam.展开更多
This paper presents a study on sound absorption property of aluminum foam by evaluating its sound absorption coefficients using standing wave tube method. Experimental results showed that the average values of sound a...This paper presents a study on sound absorption property of aluminum foam by evaluating its sound absorption coefficients using standing wave tube method. Experimental results showed that the average values of sound absorption coefficients (over the test frequency range) are all above 0.4, which indicate very good sound absorption property of the aluminum foams. The sound absorption coefficient is affected by frequency and pore structure, and reaches its maximum value at around 1 000 Hz. With the increase of porosity and decrease of cell diameter, the sound absorption coefficient values increase.展开更多
Using the three-dimensional reticular nickel foam as experimental material, the sound absorption performance was investigated for several various multilayer structures in the frequency range of 2000-4000 Hz, which is ...Using the three-dimensional reticular nickel foam as experimental material, the sound absorption performance was investigated for several various multilayer structures in the frequency range of 2000-4000 Hz, which is aurally sensitive for human ears. The results showed that the 7.5 mm-thick foam sample, which was formed by piling of 5-layer foam plate（thickness： 1.5 mm; porosity： 96%; average pore-diameter： 0.65 mm） could exhibit an excellent sound absorption effect at 4000 Hz, with the absorption coefficient about 0.8. Constituting alternate air gap with the total thickness of about 18.5 mm can greatly improve the absorption performance at relatively low frequencies of 2000-3150 Hz, with the absorption coefficient up to about 0.5 or more. In addition, the research showed that alternate piling up the perforated plate inside the foam plates can also achieve a quite good effect of sound absorption at relatively low frequencies.展开更多
Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical perform...Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical performances were evaluated by using an impedance tube instrument. Results show that the kapok fiber has excellent acoustical damping performance due to its natural hollow structure, and the sound absorption coefficients of kapok fibrous assemblies are significantly affected by the bulk density, thickness and arrangement of kapok fibers but less dependent on the fiber length. Compared with assemblies of commercial glass wool and degreasing cotton fibers, the kapok fiber assemblies with the same thickness but much smaller bulk density may have the similar sound absorption coefficients. Theoretical modelling of the acoustical damping performance of kapok fibers shows a good agreement with the experimental data. All the results demonstrate that kapok fiber is a promising light and environment-friendly sound absorption material.展开更多
The purpose of the research is to assess the sound absorption performance(SAP)of acoustic metamaterials made of double-layer Nomex honeycomb structures in which a micro-orifice corresponds to a honeycomb unit.For this...The purpose of the research is to assess the sound absorption performance(SAP)of acoustic metamaterials made of double-layer Nomex honeycomb structures in which a micro-orifice corresponds to a honeycomb unit.For this purpose,the influences of structural parameters on the SAP of acoustic metamaterials were investigated by using experimental testing and a validated theoretical model.In addition,the sandwich structure was optimized by the genetic algorithm.The research shows that the panel thickness and micro-orifice diameter mainly affect the second resonant frequency and second peak sound absorption coefficient(SAC)of the structure.The unit cell size is found to influence the first and second resonant frequencies and two peaks of the SAC.An extremely low side-length of the honeycomb core decreases the SAP of the structure for low-frequency noise signals.Additionally,the sandwich structure presents a better SAP when the diameter of micro-orifices on the front micro-perforated panel(MPP)exceeds that of the back MPP.The sandwich structure shows better noise reduction performance after the optimization aiming at the noise frequency outside trains.展开更多
Although lightweight and three-dimensional(3 D) graphene aerogels are highly desirable for microwave absorption(MA) due to their high porosity,specific surface area,and 3 D conductive network,it still remains a large ...Although lightweight and three-dimensional(3 D) graphene aerogels are highly desirable for microwave absorption(MA) due to their high porosity,specific surface area,and 3 D conductive network,it still remains a large challenge to construct a multifunctional application framework to quickly adapt to the complex practical environment,making it to be efficiently applied in a variety of complex situation.Herein,multifunctional aramid nanofibers(ANFs) reinforced reduced graphene oxide aerogels(RGO@ANF) have been achieved by in-situ gel reaction,freeze-drying,and thermal annealing processes.The introduced ANFs in RGO aerogels can prevent the graphene sheets from over-stacking and enhance the connectivity of cell walls,thus leading to excellent compression resistance,MA,sound absorption,and thermal insulation performance.Under 70% strain,the maximum compressive stress of RGO@ANF aerogel reaches78.8 kPa,and reversible compressibility with reliable resistance to fatigue for 100 compressive cycles at20% strain.Further,the RGO@ANF aerogel exhibit a minimum reflection loss(RL_(min)) of-56.5 dB and a maximum effective absorption bandwidth(EAB) of 7.0 GHz at a thickness of 2.8 mm,basically covering the X and Ku bands.Moreover,the hybrid aerogel exhibited excellent sound absorption with an average absorption coefficient> 0.56 at 2-6 kHz and good thermal insulation performance with low thermal conductivity of about 49.18 mW m-1K-1.The integrated graphene aerogels with such multifunctional performances hold a great promise for applications such as MA,sound absorption,and heat insulation.展开更多
The acoustical damping property of electrospun polyacrylonitrile （PAN） nanofibrous membranes with different thicknesses and porosities was investigated. The sound absorption coefficients were measured using the impe...The acoustical damping property of electrospun polyacrylonitrile （PAN） nanofibrous membranes with different thicknesses and porosities was investigated. The sound absorption coefficients were measured using the impedance tube instrument based on ISO10534-2：1998（E）. Results indicate that the first resonance absorption frequency of nanofibrous membranes shifts to the lower frequency with the increase of the back cavity or the thickness of membranes. Moreover, the sound absorption performance of the perforated pane/ can be greatly improved by combination with a thin layer of PAN nanofibrous membrane. Traditional acoustical damping materials （foam, fiber） coated with nanofibrous membranes have better acoustical performance in the low and medium frequency range than that of acoustical materials alone. All of the results demonstrate the PAN nanofibrous membrane is a suitable candidate for noise reduction.展开更多
Light polymeric soundproofing materials （density = 63 kg/m3） of interest for the transportation industry were fabricated through electrospinning. Blankets of electrospun polyvinylpyrrolidone （average fiber diameter...Light polymeric soundproofing materials （density = 63 kg/m3） of interest for the transportation industry were fabricated through electrospinning. Blankets of electrospun polyvinylpyrrolidone （average fiber diameter = （1.6 ± 0.5） or （2.8 ± 0.5） μm） were obtained by stacking disks of electrospun mats. The sound absorption coefficients were measured using the impedance tube instrument based on ASTM E1050 and ISO 10534-2. For a given set of disks （from a minimum of 6） the sound absorption coefficient changed with the frequency （in the range 200-1600 Hz） following a bell shape curve with a maximum （where the coefficient is greater than 0.9） that shifts to lower frequencies at higher piled disks number and greater fiber diameter. This work showed that electrospinning produced sound absorbers with reduced thickness （2-3 cm） and excellent sound-absorption properties in the low and medium frequency range.展开更多
China’s coastal waters are turbid and the properties of the seabed are complex. This negatively impacts the performance of underwater detection equipment. The properties of sound absorption in turbid water are not we...China’s coastal waters are turbid and the properties of the seabed are complex. This negatively impacts the performance of underwater detection equipment. The properties of sound absorption in turbid water are not well understood. In this paper, the coefficient of sound absorption in turbid water was measured by the reverberation technique. All work was done in a reverberation barrel made of seamless aluminum. First, pure water was poured into the reverberation barrel and its reverberation time measured. Next, various concentrations of turbid water were poured into the barrel and their reverberation time measured. After all data had been gathered, the coefficient of sound absorption in turbid water of different concentrations was calculated. From this we determined a law of sound absorption in turbid water as summarized in the paper.展开更多
This study investigates a dual-cavity resonant composite sound-absorbing structure based on a micro-perforated plate.Using the COMSOL impedance tube model,the effects of various structural parameters on sound absorpti...This study investigates a dual-cavity resonant composite sound-absorbing structure based on a micro-perforated plate.Using the COMSOL impedance tube model,the effects of various structural parameters on sound absorption and sound insulation performances are analyzed.Results show that the aperture of the micro-perforated plate has the greatest influence on the sound absorption coefficient;the smaller the aperture,the greater is this coefficient.The thickness of the resonance plate has the most significant influence on the sound insulation and resonance frequency;the greater the thickness,the wider the frequency domain in which sound insulation is obtained.In addition,the effect of filling the structural cavity with porous foam ceramics has been studied,and it has been found that the porosity and thickness of the porous material have a significant effect on the sound absorption coefficient and sound insulation,while the pore size exhibits a limited influence.展开更多
We report an extraordinary sound absorption enhancement in low and intermediate frequencies achieved by a thin multi-slit hybrid structure formed by incorporating micrometer scale micro-slits into a sub-millimeter sca...We report an extraordinary sound absorption enhancement in low and intermediate frequencies achieved by a thin multi-slit hybrid structure formed by incorporating micrometer scale micro-slits into a sub-millimeter scale meso-slit matrix. Theoretical and numerical results reveal that this exotic phenomenon is attributed to the noticeable velocity and temperature gradients induced at the junctures of the micro- and meso-slits, which cause significant loss of sound energy as a result of viscous and thermal effects. It is demonstrated that the proposed thin multi-slit hybrid structure with micro-scale configuration is capable of controling low frequency noise with large wavelength, which is attractive for applications where the size and weight of a sound absorber are restricted.展开更多
Polyurethane foam as the most well-known absorbent materials has a suitable absorption coefficient only within a limited frequency range.The aim of this study was to improve the sound absorption coefficient of flexibl...Polyurethane foam as the most well-known absorbent materials has a suitable absorption coefficient only within a limited frequency range.The aim of this study was to improve the sound absorption coefficient of flexible polyurethane(PU)foam within the range of various frequencies using clay nanoparticles,polyacrylonitrile nanofibers,and polyvinylidene fluoride nanofibers.The response surface method was used to determine the effect of addition of nanofibers of PAN and PVDF,addition of clay nanoparticles,absorbent thickness,and air gap on the sound absorption coefficient of flexible polyurethane foam(PU)across different frequency ranges.The absorption coefficient of the samples was measured using Impedance Tubes device.Nano clay at low thicknesses as well as polyacrylonitrile nanofibers and polyvinyl fluoride nanofibers at higher thicknesses had a greater positive effect on absorption coefficient.The mean sound absorption coefficient in the composite with the highest absorption coefficient at middle and high frequencies was 0.798 and 0.75,respectively.In comparison with pure polyurethane foam with the same thickness and air gap,these values were 2.22 times at the middle frequencies and 1.47 times at high frequencies,respectively.Surface porosity rose with increasing nano clay,but decreased with increasing polyacrylonitrile nanofibers and polyvinyl fluoride nanofibers.The results indicated that the absorption coefficient was elevated with increasing the thickness and air gap.This study suggests that the use of a combination of nanoparticles and nanofibers can enhance the acoustic properties of flexible polyurethane foam.展开更多
We present the design of micro-helix metamaterial supporting high sound absorption characteristic by 3D printing. The sample structure which is fabricated out of polylactide （PLA） material, many micro-helix are arra...We present the design of micro-helix metamaterial supporting high sound absorption characteristic by 3D printing. The sample structure which is fabricated out of polylactide （PLA） material, many micro-helix are arranged by periodic arrays on XY plane. Experiment measurement results show that different geometrical dimensions of helix vestibule and cavity depth have a great effect on sound absorption coefficient. Physical mechanism depends on the friction and viscosity between the air and the helix vestibule. This work shows great potential of micro-structure metamaterial in noise control applications require light weight and large rigid of sound absorption.展开更多
The vibroacoustic response and sound absorption performance of a structure composed of multilayer plates and one rigid back wall are theoretically analyzed. In this structure, all plates are two-dimensional, microperf...The vibroacoustic response and sound absorption performance of a structure composed of multilayer plates and one rigid back wall are theoretically analyzed. In this structure, all plates are two-dimensional, microperforated, and periodically rib-stiffened. To investigate such a structural system, semianalytical models of one-layer and multilayer plate structures considering the vibration effects are first developed. Then approaches of the space harmonic method and Fourier transforms are applied to a one-layer plate, and finally the cascade connection method is utilized for a multilayer plate structure. Based on fundamental acoustic formulas, the vibroacoustic responses of microperforated stiffened plates are expressed as functions of a series of harmonic amplitudes of plate displacement, which are then solved by employing the numerical truncation method. Applying the inverse Fourier transform, wave propagation, and linear addition properties, the equations of the sound pressures and absorption coefficients for the one-layer and multilayer stiffened plates in physical space are finally derived. Using numerical examples, the effects of the most important physical parameters-for example, the perforation ratio of the plate, sound incident angles, and periodical rib spacing-on sound absorption performance are examined. Numerical results indicate that the sound absorption performance of the studied structure is effectively enhanced by the flexural vibration of the plate in water. Finally, the proposed approaches are validated by comparing the results of stiffened plates of the present work with solutions from previous studies.展开更多
基金National Natural Science Foundation of China(No.51705545)。
文摘The active sound absorption technique excels in mitigating low-frequency sound waves,yet it falls short when dealing with medium and high-frequency sound waves.To enhance the sound-absorbing effect of medium and high-frequency sound waves,a novel semi-active sound absorption method has been introduced.This method modulates the surface impedance of a loudspeaker positioned behind the sound-absorbing material,thereby altering the sound absorption coefficient.The theoretical sound absorption coefficient is calculated using MATLAB and compared with the experimental one.Results show that the method can effectively modulates the absorption coefficient in response to varying incident sound wave frequencies,ensuring that it remains at its peak value.
基金financially supported by the National Science Foundation of China(Nos.52362024,22004106,51872238 and 21806129)the Fundamental Research Funds for the Central Universities(Nos.3102018zy045 and 3102019AX11)+1 种基金the Shaanxi Excellent Young Talents Support Program for Universities(No.202120006)the Key Laboratory of Icing and Anti/Deicing of CARDC(IADL20220401).
文摘As electromagnetic pollution escalates and protection demands diversify,there is an urgent requirement for versatile carbon foam materials capable of absorbing electromagnetic waves(EMWs).Furthermore,the concern about global warming and the depletion of petrochemical resources calls for facile and eco-friendly methods for the large-scale production of multi-functional and biodegradable carbon foams.Herein,cornstraw-derived carbon foams(CCFs)integrating EMW absorption,sound absorption,and heat insulation were prepared by a facile dual-template strategy.Benefiting from the dual-template effect of air bubbles and ice crystals,the obtained foam manifests an ultra-low density of 31 mg/cm^(3),large poros-ity of 0.85 and also super-broad absorption with an effective absorption bandwidth(EAB)of 7.18 GHz at 3.6 mm,even beyond most carbon-based composite foams.Moreover,abundant pores also endow the foam with good thermal insulation performance(as low as 0.041 W/(m K))and high sound absorp-tion coefficient(0.8 at 1250-6000 Hz),which are equivalent to commercial foams.The excellent EMW absorption performance originates from conduction loss produced by the three-dimensional(3D)inter-connected network structure and also interfacial polarization and multiple scattering induced by porous structure.Additionally,the abundant closed pores in foam prevent thermal convection and thus provide good thermal-insulation performance,yet the opening pores proffer excellent sound absorption through resonance and friction absorption.This study provides new insights into the green synthesis of multi-functional microwave absorbing foam and also supplies a new thermal-insulation material for exterior walls of buildings exposed to electromagnetic environment.
基金supported by the Natural Science Foundation of Hunan Province(No.2024JJ7392)the National Natural Science Foundation of China(No.52463002)+1 种基金Educational Commission of Hunan Province(No.22A0383)Special Funds for Construction of Innovative Provinces in Hunan Province(No.2020SK2028).
文摘An inverse vulcanized polymer,SZIM combining Zn2+-imidazole coordination bonds and polysulfide bonds was synthesized and incorporated into bio-based Eucommia ulmoides gum (EUG) to generate EUG-SZIM-xs.The residual crystallinity of the EUG matrix synergistically interacted with the dual cross-linking networks to establish reversible deformation domains,providing EUG-SZIM-xs with quick shape memory capability at moderate temperatures.The damping properties were also investigated,and EUG-SZIM-xs displayed high tanδ values (>0.3) when the SZIM dosage was higher than 5.5 phr,which showed a positive correlation with SZIM concentration.Such good damping performance endowed the EUG-SZIM-xs with broadband low-frequency sound absorption.In addition,the dual cross-linking networks endowed the materials with reprocessability under different catalytic systems,and the 1,8-diazobicyclic[5.4.0]undeca-7-ene (DBU)-catalyzed samples exhibited better mechanical properties than EUG-SZIM-xs.
基金National Natural Science Foundation of China(No.51705545)。
文摘To minimize the calculation errors in the sound absorption coefficient resulting from inaccurate measurements of flow resistivity,a simple method for determining the sound absorption coefficient of soundabsorbing materials is proposed.Firstly,the sound absorption coefficients of a fibrous sound-absorbing material are measured at two different frequencies using the impedance tube method.Secondly,utilizing the empirical formulas for the wavenumber and acoustic impedance in the fibrous material,the flow resistivity and porosity of the sound-absorbing materials are calculated using the MATLAB cycle program.Thirdly,based on the values obtained through reverse calculations,the sound absorption coefficient,the real and the imaginary parts of the acoustic impedance of the sound-absorbing material at different frequencies are theoretically computed.Finally,the accuracy of these theoretical calculations is verified through experiments.The experimental results indicate that the calculated values are basically consistent with the measured values,demonstrating the feasibility and reliability of this method.
文摘The sound absorption coefficients of wood and wood boards for five eucalypt species (Eucalyptus urophylla, Euca-lyptus urophylla E. grandis, Eucalyptus urophylla E. tereticornis, Eucalyptus urophylla E. camaldulensis and Eucalyptus cloeziana) that were collected from plantation in Dongmen Forestry Center of Guangxi Province, China were tested with stand-ing wave method and their sound absorption properties were also compared. The results showed that the sound absorption co-efficients of the five eucalypt wood species did not change evidently below 1000 Hz, but above 1000 Hz their sound absorption coefficients increased with the increasing frequency. The difference in sound absorption coefficient among five species of eucalypt wood is not evident at the tested frequency range (200-2000 Hz), but the sound absorption property of Eucalyptus urophylla at low frequency is better than that of other four species. The sound absorption coefficient of the tangential-sawn board is higher than that of the radial-sawn board. The sound absorption property of eucalypt wood of 0.5 cm in thickness is much better than that of 1.0 cm in thickness. It is concluded that wood sound absorption properties of eucalypts are affected by their board thickness and the type of sawn timber within the testing frequency, but the variance of wood sound absorption property among the five tested species is not significant.
文摘Based on sound absorption mechanism of material,the special sound absorption material CEMCOM for road sound insulation is introduced.This high sound absorption material is mainly composed of expanded perlite.Using multiple sound absorption structure can improve sound absorption property of material.According to the preparation principle and durability design of material,a new kind of material with low cost and high durability is developed.
基金Project (C16) supported by the Testing Foundation of Beijing Normal University,China
文摘Commercial3D reticular nickel foam and its composite structure were investigated on the sound absorption at200-2000Hz.The absorption performance of foam plates1?5layers(1-layer thickness:2.3mm;porosity:89%;average pore-diameter:0.57mm)was found to be poor,and could be improved by adding backed cavum or front perforated thin sheet.The absorption coefficient could reach about0.4at1000-1600Hz for the composite structure of5-layer foam with a backed5mm-thick cavum,and even0.68at about1000Hz for that of2-layer foam with the same cavum and a perforated plate closely in front of the foam.
文摘This paper presents a study on sound absorption property of aluminum foam by evaluating its sound absorption coefficients using standing wave tube method. Experimental results showed that the average values of sound absorption coefficients (over the test frequency range) are all above 0.4, which indicate very good sound absorption property of the aluminum foams. The sound absorption coefficient is affected by frequency and pore structure, and reaches its maximum value at around 1 000 Hz. With the increase of porosity and decrease of cell diameter, the sound absorption coefficient values increase.
基金Project(C16) supported by the Testing Foundation of Beijing Normal University,China
文摘Using the three-dimensional reticular nickel foam as experimental material, the sound absorption performance was investigated for several various multilayer structures in the frequency range of 2000-4000 Hz, which is aurally sensitive for human ears. The results showed that the 7.5 mm-thick foam sample, which was formed by piling of 5-layer foam plate（thickness： 1.5 mm; porosity： 96%; average pore-diameter： 0.65 mm） could exhibit an excellent sound absorption effect at 4000 Hz, with the absorption coefficient about 0.8. Constituting alternate air gap with the total thickness of about 18.5 mm can greatly improve the absorption performance at relatively low frequencies of 2000-3150 Hz, with the absorption coefficient up to about 0.5 or more. In addition, the research showed that alternate piling up the perforated plate inside the foam plates can also achieve a quite good effect of sound absorption at relatively low frequencies.
基金financially supported by the National Natural Science Foundation of China (Nos.21121001,51073166)
文摘Sound absorption properties of natural kapok fibers have been investigated. Kapok fibrous assemblies with different bulk density, thickness, fiber length and orientation were manufactured, and their acoustical performances were evaluated by using an impedance tube instrument. Results show that the kapok fiber has excellent acoustical damping performance due to its natural hollow structure, and the sound absorption coefficients of kapok fibrous assemblies are significantly affected by the bulk density, thickness and arrangement of kapok fibers but less dependent on the fiber length. Compared with assemblies of commercial glass wool and degreasing cotton fibers, the kapok fiber assemblies with the same thickness but much smaller bulk density may have the similar sound absorption coefficients. Theoretical modelling of the acoustical damping performance of kapok fibers shows a good agreement with the experimental data. All the results demonstrate that kapok fiber is a promising light and environment-friendly sound absorption material.
基金Project(51775558)supported by the National Natural Science Foundation of ChinaProject(2019 JJ 30034)supported by the Natural Science Foundation for Excellent Youth Scholars of Hunan Province,ChinaProject(20181053303 gg)supported by the Training Objects of Young-Middle-Aged Backbone Teacher in Ordinary Universities of Hunan Province,China。
文摘The purpose of the research is to assess the sound absorption performance(SAP)of acoustic metamaterials made of double-layer Nomex honeycomb structures in which a micro-orifice corresponds to a honeycomb unit.For this purpose,the influences of structural parameters on the SAP of acoustic metamaterials were investigated by using experimental testing and a validated theoretical model.In addition,the sandwich structure was optimized by the genetic algorithm.The research shows that the panel thickness and micro-orifice diameter mainly affect the second resonant frequency and second peak sound absorption coefficient(SAC)of the structure.The unit cell size is found to influence the first and second resonant frequencies and two peaks of the SAC.An extremely low side-length of the honeycomb core decreases the SAP of the structure for low-frequency noise signals.Additionally,the sandwich structure presents a better SAP when the diameter of micro-orifices on the front micro-perforated panel(MPP)exceeds that of the back MPP.The sandwich structure shows better noise reduction performance after the optimization aiming at the noise frequency outside trains.
基金financially supported by the National Natural Science Foundation of China (NSFC,Nos.51903213 and5217130190)the Science and Technology Planning Project of Sichuan Province (No.2020YFH0053)+1 种基金the Central Government Guides the Local Science and Technology Development Special Funds to freely explore basic research projects (No.2021Szvup124)the Fundamental Research Funds for the Central Universities(No.2682021GF004)。
文摘Although lightweight and three-dimensional(3 D) graphene aerogels are highly desirable for microwave absorption(MA) due to their high porosity,specific surface area,and 3 D conductive network,it still remains a large challenge to construct a multifunctional application framework to quickly adapt to the complex practical environment,making it to be efficiently applied in a variety of complex situation.Herein,multifunctional aramid nanofibers(ANFs) reinforced reduced graphene oxide aerogels(RGO@ANF) have been achieved by in-situ gel reaction,freeze-drying,and thermal annealing processes.The introduced ANFs in RGO aerogels can prevent the graphene sheets from over-stacking and enhance the connectivity of cell walls,thus leading to excellent compression resistance,MA,sound absorption,and thermal insulation performance.Under 70% strain,the maximum compressive stress of RGO@ANF aerogel reaches78.8 kPa,and reversible compressibility with reliable resistance to fatigue for 100 compressive cycles at20% strain.Further,the RGO@ANF aerogel exhibit a minimum reflection loss(RL_(min)) of-56.5 dB and a maximum effective absorption bandwidth(EAB) of 7.0 GHz at a thickness of 2.8 mm,basically covering the X and Ku bands.Moreover,the hybrid aerogel exhibited excellent sound absorption with an average absorption coefficient> 0.56 at 2-6 kHz and good thermal insulation performance with low thermal conductivity of about 49.18 mW m-1K-1.The integrated graphene aerogels with such multifunctional performances hold a great promise for applications such as MA,sound absorption,and heat insulation.
基金financially supported by the National Natural Science Foundation of China(Nos.50821062,50673097)CAS Innovation Project(No.2007CB936400)
文摘The acoustical damping property of electrospun polyacrylonitrile （PAN） nanofibrous membranes with different thicknesses and porosities was investigated. The sound absorption coefficients were measured using the impedance tube instrument based on ISO10534-2：1998（E）. Results indicate that the first resonance absorption frequency of nanofibrous membranes shifts to the lower frequency with the increase of the back cavity or the thickness of membranes. Moreover, the sound absorption performance of the perforated pane/ can be greatly improved by combination with a thin layer of PAN nanofibrous membrane. Traditional acoustical damping materials （foam, fiber） coated with nanofibrous membranes have better acoustical performance in the low and medium frequency range than that of acoustical materials alone. All of the results demonstrate the PAN nanofibrous membrane is a suitable candidate for noise reduction.
基金partially supported and funded by the Department of Education, Research, Labour, of the Cultural Politics and Social Politics of Campania Region under the research program“MITO-Improvement and Innovation of “Thermoacoustical Material for Aeronautical Applications” PO FESR Campania 2007/2013, OO 2.1 CUP: B68C12000640007, Code SMILE: 150
文摘Light polymeric soundproofing materials （density = 63 kg/m3） of interest for the transportation industry were fabricated through electrospinning. Blankets of electrospun polyvinylpyrrolidone （average fiber diameter = （1.6 ± 0.5） or （2.8 ± 0.5） μm） were obtained by stacking disks of electrospun mats. The sound absorption coefficients were measured using the impedance tube instrument based on ASTM E1050 and ISO 10534-2. For a given set of disks （from a minimum of 6） the sound absorption coefficient changed with the frequency （in the range 200-1600 Hz） following a bell shape curve with a maximum （where the coefficient is greater than 0.9） that shifts to lower frequencies at higher piled disks number and greater fiber diameter. This work showed that electrospinning produced sound absorbers with reduced thickness （2-3 cm） and excellent sound-absorption properties in the low and medium frequency range.
文摘China’s coastal waters are turbid and the properties of the seabed are complex. This negatively impacts the performance of underwater detection equipment. The properties of sound absorption in turbid water are not well understood. In this paper, the coefficient of sound absorption in turbid water was measured by the reverberation technique. All work was done in a reverberation barrel made of seamless aluminum. First, pure water was poured into the reverberation barrel and its reverberation time measured. Next, various concentrations of turbid water were poured into the barrel and their reverberation time measured. After all data had been gathered, the coefficient of sound absorption in turbid water of different concentrations was calculated. From this we determined a law of sound absorption in turbid water as summarized in the paper.
基金This study was supported by State Grid Corporation Science and Technology Project“Research on Comprehensive Control Technology of Low Frequency Noise of Distribution Transformers in Residential Areas”(5216A019000P).
文摘This study investigates a dual-cavity resonant composite sound-absorbing structure based on a micro-perforated plate.Using the COMSOL impedance tube model,the effects of various structural parameters on sound absorption and sound insulation performances are analyzed.Results show that the aperture of the micro-perforated plate has the greatest influence on the sound absorption coefficient;the smaller the aperture,the greater is this coefficient.The thickness of the resonance plate has the most significant influence on the sound insulation and resonance frequency;the greater the thickness,the wider the frequency domain in which sound insulation is obtained.In addition,the effect of filling the structural cavity with porous foam ceramics has been studied,and it has been found that the porosity and thickness of the porous material have a significant effect on the sound absorption coefficient and sound insulation,while the pore size exhibits a limited influence.
基金Supported by the National Basic Research Program of China under Grant No 2011CB610300the National Natural Science Foundation of China under Grant Nos 11102148 and 11321062the Fundamental Research Funds for Central Universities of China
文摘We report an extraordinary sound absorption enhancement in low and intermediate frequencies achieved by a thin multi-slit hybrid structure formed by incorporating micrometer scale micro-slits into a sub-millimeter scale meso-slit matrix. Theoretical and numerical results reveal that this exotic phenomenon is attributed to the noticeable velocity and temperature gradients induced at the junctures of the micro- and meso-slits, which cause significant loss of sound energy as a result of viscous and thermal effects. It is demonstrated that the proposed thin multi-slit hybrid structure with micro-scale configuration is capable of controling low frequency noise with large wavelength, which is attractive for applications where the size and weight of a sound absorber are restricted.
文摘Polyurethane foam as the most well-known absorbent materials has a suitable absorption coefficient only within a limited frequency range.The aim of this study was to improve the sound absorption coefficient of flexible polyurethane(PU)foam within the range of various frequencies using clay nanoparticles,polyacrylonitrile nanofibers,and polyvinylidene fluoride nanofibers.The response surface method was used to determine the effect of addition of nanofibers of PAN and PVDF,addition of clay nanoparticles,absorbent thickness,and air gap on the sound absorption coefficient of flexible polyurethane foam(PU)across different frequency ranges.The absorption coefficient of the samples was measured using Impedance Tubes device.Nano clay at low thicknesses as well as polyacrylonitrile nanofibers and polyvinyl fluoride nanofibers at higher thicknesses had a greater positive effect on absorption coefficient.The mean sound absorption coefficient in the composite with the highest absorption coefficient at middle and high frequencies was 0.798 and 0.75,respectively.In comparison with pure polyurethane foam with the same thickness and air gap,these values were 2.22 times at the middle frequencies and 1.47 times at high frequencies,respectively.Surface porosity rose with increasing nano clay,but decreased with increasing polyacrylonitrile nanofibers and polyvinyl fluoride nanofibers.The results indicated that the absorption coefficient was elevated with increasing the thickness and air gap.This study suggests that the use of a combination of nanoparticles and nanofibers can enhance the acoustic properties of flexible polyurethane foam.
基金supported by the National Natural Science Foundation of China (11704314 and 11474230)the Fundamental Research Funds for the Central Universities (3102016QD056) for financial support
文摘We present the design of micro-helix metamaterial supporting high sound absorption characteristic by 3D printing. The sample structure which is fabricated out of polylactide （PLA） material, many micro-helix are arranged by periodic arrays on XY plane. Experiment measurement results show that different geometrical dimensions of helix vestibule and cavity depth have a great effect on sound absorption coefficient. Physical mechanism depends on the friction and viscosity between the air and the helix vestibule. This work shows great potential of micro-structure metamaterial in noise control applications require light weight and large rigid of sound absorption.
基金supported by the National Natural Science Foundation of China (Grants 51405276, 51505261, and 50875030)the Natural Science Foundation of Shandong Province, China (Grants ZR2014EEQ019 and ZR2014EEP025)the Foundation for Young Teacher Development of the Shandong University of Technology
文摘The vibroacoustic response and sound absorption performance of a structure composed of multilayer plates and one rigid back wall are theoretically analyzed. In this structure, all plates are two-dimensional, microperforated, and periodically rib-stiffened. To investigate such a structural system, semianalytical models of one-layer and multilayer plate structures considering the vibration effects are first developed. Then approaches of the space harmonic method and Fourier transforms are applied to a one-layer plate, and finally the cascade connection method is utilized for a multilayer plate structure. Based on fundamental acoustic formulas, the vibroacoustic responses of microperforated stiffened plates are expressed as functions of a series of harmonic amplitudes of plate displacement, which are then solved by employing the numerical truncation method. Applying the inverse Fourier transform, wave propagation, and linear addition properties, the equations of the sound pressures and absorption coefficients for the one-layer and multilayer stiffened plates in physical space are finally derived. Using numerical examples, the effects of the most important physical parameters-for example, the perforation ratio of the plate, sound incident angles, and periodical rib spacing-on sound absorption performance are examined. Numerical results indicate that the sound absorption performance of the studied structure is effectively enhanced by the flexural vibration of the plate in water. Finally, the proposed approaches are validated by comparing the results of stiffened plates of the present work with solutions from previous studies.
