In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar perce...In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.展开更多
The low-dose X-ray induced long afterglow near infrared(NIR)luminescence from Cr^(3+)doped Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions was investigated.The structure analysis shows the good formation of Zn_(1-x)Cd...The low-dose X-ray induced long afterglow near infrared(NIR)luminescence from Cr^(3+)doped Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions was investigated.The structure analysis shows the good formation of Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions,which possesses a cubic spinel structure with Fd3m space group.The formation of Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions induces the obvious increase of long afterglow near infrared luminescence excited by low-dose X-ray,When the content of doped Cd^(2+)reaches 0.1,the low-dose X-ray induced long afterglow NIR luminescence is the maximum.More importantly,only 5 s Xray irradiation can induce more than 6 h NIR afterglow emission,of which the afterglow luminescent intensity is still 5 times stronger than the background intensity after 6 h.The thermoluminescent results show that under the 5 s exposure of X-ray,the trap density of Zn_(0.9)Cd_(0.1)Ga_(2)O_(4):Cr^(3+)is much higher than that of ZnGa_(2)O_(4):Cr^(3+).The replacement of Cd^(2+)ions with large radius at Zn^(2+)sites causes the increase of de fects and dislocations,which results in the obvious increase of trap co ncentrations.And the addition of high-z number elements Cd^(2+)would enhance the X-ray absorption of the solid solutions,which thus can be easily excited by low-dose X-ray.Zn_(0.9)Cd_(0.1)Ga_(2)O_(4):1%Cr^(3+)solid solution is a potential candidate of lowdose X-ray induced long afterglow luminescent materials.展开更多
To separate the phosphorus-containing phase from steel slag,the effects of B_(2)O_(3)and Na_(2)B_(4)O_(7)on the enrichment of phosphorus-containing phases in Ca_(2)SiO_(4)–Ca_(3)(PO_(4))_(2)(C_(2)S–C_(3)P)solid solu...To separate the phosphorus-containing phase from steel slag,the effects of B_(2)O_(3)and Na_(2)B_(4)O_(7)on the enrichment of phosphorus-containing phases in Ca_(2)SiO_(4)–Ca_(3)(PO_(4))_(2)(C_(2)S–C_(3)P)solid solution were comparatively analyzed through theoretical calculations and experimental investigations.The results indicate that the optimum reaction temperature between B_(2)O_(3)and C_(2)S–C_(3)P is 800℃.The phase compositions of C_(2)S–C_(3)P equilibrium system with 5 wt.%B_(2)O_(3)at 800℃ included Ca_(3)(PO_(4))_(2),CaSiO_(3)and Ca11B_(2)Si_(4)O_(22),among which the content of Ca_(3)(PO_(4))_(2)was the highest.For C_(2)S–C_(3)P with 5 wt.%Na_(2)B_(4)O_(7)equilibrium system,Ca_(3)(PO_(4))_(2),CaSiO_(3),Ca11B_(2)Si_(4)O_(22)and Na_(2)Ca_(2)P_(2)O_(8)were independent at 390–690℃.Ca_(3)(PO_(4))_(2)and Ca_(2)SiO_(4)precipitated in the solid solution when the addition of B_(2)O_(3)was more than 6 wt.%,and the content of Ca_(3)(PO_(4))_(2)raised with the increase in the addition of B_(2)O_(3).The main phases in the C_(2)S–C_(3)P solid solution with Na_(2)B_(4)O_(7)were(Ca_(2)SiO_(4))0.05[Ca_(3)(PO_(4))_(2)],Ca_(2)SiO_(4)and Na_(3)Ca_(6)(PO_(4))_(5)at 650℃.And when the addition of Na_(2)B_(4)O_(7)exceeded 6 wt.%,the content of Na_(3)Ca_(6)(PO_(4))_(5)increased significantly.There was no precipitation of Ca_(3)(PO_(4))_(2)or boron-containing phase in the samples with Na_(2)B_(4)O_(7),but a small proportion of Ca_(3)(PO_(4))_(2)transformed into(Ca_(2)SiO_(4))0.05[Ca_(3)(PO_(4))_(2)],and Ca^(2+)was partially replaced by Na^(+)to generate Na_(3)Ca_(6)(PO_(4))_(5).As a result,the temperature for Na_(2)B_(4)O_(7)to enrich the phosphorus-containing phase in C_(2)S–C_(3)P solid solution was lower than that for B_(2)O_(3).However,the grade of the phosphorus-containing phase for Na_(2)B_(4)O_(7)was lower than that for B_(2)O_(3).展开更多
The Ni−25%X(X=Fe,Co,Cu,molar fraction)solid solutions were prepared and then doped into MgH_(2) through high-energy ball milling.The initial dehydrogenation temperatures of MgH_(2)/Ni−25%X composites are all decreased...The Ni−25%X(X=Fe,Co,Cu,molar fraction)solid solutions were prepared and then doped into MgH_(2) through high-energy ball milling.The initial dehydrogenation temperatures of MgH_(2)/Ni−25%X composites are all decreased by about 90℃relative to the as-milled pristine MgH_(2).The Ni−25%Co solid solution exhibits the most excellent catalytic effect,and the milled MgH_(2)/Ni−25%Co composite can release 5.19 wt.%hydrogen within 10 min at 300℃,while the as-milled pristine MgH_(2) can only release 1.78 wt.%hydrogen.More importantly,the dehydrogenated MgH_(2)/Ni−25%Co composite can absorb 5.39 wt.%hydrogen at 275℃within 3 min.The superior hydrogen sorption kinetics of MgH_(2)/Ni−25%Co can be ascribed to the actual catalytic effect of in-situ formed Mg_(2)Ni(Co)compounds.First-principles calculations show that the hydrogen absorption/desorption energy barriers of Mg/MgH_(2) systems decrease significantly after doping with transition metal atoms,which interprets well the improved hydrogen sorption properties of MgH_(2) catalyzed by Ni-based solid solutions.展开更多
CeZr, CeYZr, LaCeZr, LaCePrZr, LaCePrYZr, and LaCePr solid solutions were prepared via the coprecipitation method, and characterized by means of X-Ray Diffraction （XRD） and Brunauer-Emmett-Teller （BET） techniques....CeZr, CeYZr, LaCeZr, LaCePrZr, LaCePrYZr, and LaCePr solid solutions were prepared via the coprecipitation method, and characterized by means of X-Ray Diffraction （XRD） and Brunauer-Emmett-Teller （BET） techniques. The oxygen storage capacity （OSC） of the solid solutions was evaluated by the pulse technique and the catalytic activity was assessed using a 4-channel catalysis device. It was seen that the solid solutions presented cubic structure. The specific surface area and thermal stability could be enhanced by doping Y into the solid solutions. Doping a small amount of La had a positive effect on the thermal durability while doping a large amount of La decreased the specific surface area and the thermal stability. LaCePrZr and LaCePrYZr solid solutions synthesized using Baotou rare earth mineral residue enriched with LaCePr after Nd extraction presented a certain higher value in specific surface area and thermal stability, thereby enabling to be used as economic catalysts for automobile exhaust purification. Coating Al2O3 or SiO2 layer on the surface of ceria-zirconia solid solutions increased the specific surface area and thermal resistance.展开更多
Nanocrystals of Ce1-xMnxO2-δ（x=0.00,0.05,0.10,0.15,and 0.20） were synthesized by a hydrothermal reaction route.The solid solutions crystallized in a cubic fluorite structure with a particle size in the range of 11...Nanocrystals of Ce1-xMnxO2-δ（x=0.00,0.05,0.10,0.15,and 0.20） were synthesized by a hydrothermal reaction route.The solid solutions crystallized in a cubic fluorite structure with a particle size in the range of 11～15 nm.The incorporation of Mn ions in CeO2 resulted in a lattice volume reduction.Mn ions showed a mixed valence state of ＋2,＋3 and ＋4 in CeO2 lattice.An obvious red-shift of the absorption threshold edge was observed from the UV-visible spectrum.Compared with the bulk CeO2,Ce1-xMnxO2-δ nanocrystals exhibited a lower releasing oxygen temperature as indicated by TPR technique.展开更多
A series of cadmium-calcium hydroxyapatite solid solutions was prepared by an aqueous precipitation method. By various means, the characterizations confirmed the formation of continuous solid solutions over all ranges...A series of cadmium-calcium hydroxyapatite solid solutions was prepared by an aqueous precipitation method. By various means, the characterizations confirmed the formation of continuous solid solutions over all ranges of Cd/（Cd＋Ca） atomic ratio. In the results, both lattice parameters a and c display slight deviations from Vegard’s rule when the Cd/（Cd＋Ca） atomic ratio is greater than 0.6. The particles change from smaller acicular to larger hexagonal columnar crystals as the Cd/（Cd＋Ca） atomic ratio increases from 0-0.60 to 0.60-1.00. The area of the phosphate peak for symmetric P-O stretching decreases with the increase in Cd/（Cd＋Ca） atomic ratio, and the peak disappears when the Cd/（Cd＋Ca） atomic ratio is greater than 0.6; the two phosphate peaks of P-O stretching gradually merge together for the Cd/（Cd＋Ca） atomic ratio near 0.60. These variations can be explained by a slight tendency of larger Cd ions to occupy M（2） sites and smaller Ca ions to prefer M（1） sites in the structure.展开更多
The aerobic,selective oxidation of hydrocarbons via C-H bond activation is still a challenge.This work shows the achievement of the room temperature visible light driven photocatalytic activation of benzylic C-H bonds...The aerobic,selective oxidation of hydrocarbons via C-H bond activation is still a challenge.This work shows the achievement of the room temperature visible light driven photocatalytic activation of benzylic C-H bonds with N-hydroxysuccinimide over BiOBr_(x)I_(1-x)(0≤x≤1)solid solutions,whose valance bands were engineered through varying the ratio of bromide to iodide.The optimal BiOBr0.85I0.15 catalyst exhibited over 98%conversion ratio of ethylbenzene,which was about 3.9 and 8.9 times that of pure BiOBr and BiOI,respectively.The excellent photocatalytic activity of BiOBr0.85I0.15 solid solution can be ascribed to the orbital hybridization of the valence band containing both Br 4p and I 5p orbitals,which could promote photo-induced charge carrier separation and improve the generation of singlet oxygen.This work shed some light on the rational design of photocatalysts for targeted organic transformation.展开更多
Samples of Ag<sub>8</sub>Ge<sub>1-x</sub>Mn<sub>x</sub>Te<sub>6</sub> solid solutions with different manganese content (x = 0, 0.05, 0.1, 0.2) were prepared by fusing an...Samples of Ag<sub>8</sub>Ge<sub>1-x</sub>Mn<sub>x</sub>Te<sub>6</sub> solid solutions with different manganese content (x = 0, 0.05, 0.1, 0.2) were prepared by fusing and further pressing their powders under the pressure of 0.6 GPa. In addition of Mn atoms to the Ag<sub>8</sub>GeTe<sub>6</sub> compound leads to compression of their lattice. All p-type samples acquire a high resistance below the transition at temperatures of 180 - 220 K. The electrical conductivity of all compositions in the range of 220 - 300 K increases due to hopping mechanism, and at temperatures T > 320 K, a semiconductor characteristic is observed. By studying impedance spectra of samples, it was established that at 80 K solid solutions behave like a homogeneous dielectric material. At high temperatures and frequencies of an external electric field, a significant role of grain boundaries in conductivity was revealed. The dielectric anomaly occurring at low frequencies is also associated with an effect that manifests itself in the grain boundary.展开更多
Electrical parameters of n-type InPxAs1-x solid solution crystals have been investigated in the range of 4.2-300 K. Theoretical calculations of current carriers mobility have been carried out and they are in good agre...Electrical parameters of n-type InPxAs1-x solid solution crystals have been investigated in the range of 4.2-300 K. Theoretical calculations of current carriers mobility have been carried out and they are in good agreement with experimental results. The contribution of current carriers scattering main mechanisms has been determined. Comparison of experimental and theoretical data has shown minor contribution of disorder scattering associated with the disordered arrangement of atoms in InPxAs1-x solid solutions. Contribution of the disorder scattering increases with increasing of InP composition in solid solutions system at fixed temperatures and weakens with lowering of temperature and never dominates. A maximal share of the ＂alloy＂ scattering observed in experimental samples of lnPxAs1-x solid solutions differs from the similar scattering in SiGe alloys. It does not exceed - 20% of total scattering at 300 K and - 10% at lower temperature. A relative small contribution of disorder scattering is important for the devices designed on the base of InPxAs1-x system.展开更多
Nanosized Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions（x = 0.00-0.20） were synthesized by means of hydrothermal method.Then the solid solutions were ball milled with Mg2Ni and Ni powders for 20 h to get the...Nanosized Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions（x = 0.00-0.20） were synthesized by means of hydrothermal method.Then the solid solutions were ball milled with Mg2Ni and Ni powders for 20 h to get the Mg2Ni–Ni–5 mol% Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） composites.The structures and spectrum characteristics of the Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions catalysts were analyzed systemically.XRD results showed that the doped samples exhibited single phase of CeO2 fluorite structure.The cell parameters and cell volumes were increased with increasing the doped content.Raman spectrum revealed that the peak position of F^2g mode shift to higher wavenumbers and the peak corresponding to oxygen vacancies were observed distinctly for the doped samples.UV-Vis technique indicated that the absorption peaks of Eu^3＋ and Nd^3＋ ions appeared; the bandgap energy was decreased linearly.The electrochemical and kinetic properties of the Mg2Ni–Ni–5 mol% Ce1-x（Nd0.5Eu0.5xO2-δ composites were measured.The maximum discharge capacity was increased from 722.3 mA h/g for x = 0.00 to 819.7 mA h/g for x = 0.16,and the cycle stability S20 increased from 25.0%（x = 0.00） to 42.2%（x = 0.20）.The kinetic measurement proved that the catalytic activity of composite surfaces and the hydrogen diffusion rate were improved for the composites with doped catalysts,especially for the composites with x = 0.16 and x = 0.20.The catalysis mechanism was analyzed from the point of microstructure and spectrum features of the Ce1-x（Nd0.5Eu0.5）xO2-δ solid solutions.展开更多
Nanosize cerium-zirconium solid solution(CZO)with a special fluorite structure has received an increasing research interest due to their remarkable advantages such as excellent oxygen storage capacity and great flexib...Nanosize cerium-zirconium solid solution(CZO)with a special fluorite structure has received an increasing research interest due to their remarkable advantages such as excellent oxygen storage capacity and great flexibility in their composition and structure.By partial metal(including rare earth,transition,alkaline earth or other metal)doping into CZO,the physicochemical properties of these catalytic materials can be controllable adjusted for the study of specific reactions.To date,nanosize CZO has been prepared by co-precipitation,sol-gel,surfactant-assisted approach,solution combustion,micro-emulsion,high energy mechanical milling,etc.The advent of these methodologies has prompted researchers to construct well-defined networks with customized micromorphology and functionalities.In this review,we describe not only the basic structure and synthetic strategies of CZO,but also their relevant applications in environmental catalysis,such as the purification for CO,nitrogen oxides(NOx),volatile organic compounds(VOC),soot,hydrocarbon(HC),CO2 and solid particulate matters(PM),and some reaction mechanisms are also summarized.展开更多
A series of SnO2‐based catalysts modified by Mn, Zr, Ti and Pb oxides with a Sn/M （M=Mn, Zr, Ti and Pb） molar ratio of 9/1 were prepared by a co‐precipitation method and used for CH4 and CO oxidation. The Mn3＋, ...A series of SnO2‐based catalysts modified by Mn, Zr, Ti and Pb oxides with a Sn/M （M=Mn, Zr, Ti and Pb） molar ratio of 9/1 were prepared by a co‐precipitation method and used for CH4 and CO oxidation. The Mn3＋, Zr4＋, Ti4＋and Pb4＋cations are incorporated into the lattice of tetragonal rutile SnO2 to form a solid solution structure. As a consequence, the surface area and thermal stability of the catalysts are improved. Moreover, the oxygen species of the modified catalysts become easier to be reduced. Therefore, the oxidation activity over the catalysts was improved, except for the one modified by Pb oxide. Manganese oxide demonstrates the best promotional effects for SnO2. Using an X‐ray diffraction extrapolation method, the lattice capacity of SnO2 for Mn2O3 was 0.135 g Mn2O3/g SnO2, which indicates that to form stable solid solution, only 21%Sn4＋cations in the lattice can be maximally replaced by Mn3＋. If the amount of Mn3＋cations is over the capacity, Mn2O3 will be formed, which is not favorable for the activity of the catalysts. The Sn rich samples with only Sn‐Mn solid solution phase show higher activity than the ones with excess Mn2O3 species.展开更多
Nanosized Fe^3＋ and Eu^3＋ codoped CeO2 solid solutions were synthesized via hydrothermal method. The crystalline structure of Ce1-x（Fe0.5Eu0.5）xO2-δx=0.00–0.30） solid solutions was carried out by the X-ray diff...Nanosized Fe^3＋ and Eu^3＋ codoped CeO2 solid solutions were synthesized via hydrothermal method. The crystalline structure of Ce1-x（Fe0.5Eu0.5）xO2-δx=0.00–0.30） solid solutions was carried out by the X-ray diffraction technique, and the spectrum features were identified by UV-Vis and Raman spectroscopy, respectively. It was observed that the cell parameters were first increased then decreased by increasing the doped ions content. The phase separation was detected when the dopant concentration reached to x=0.30. UV-Vis spectrum showed that the width of the band gap gradually reduced by increasing the doped content, and the solid solubility was determined to be x=0.20. The Raman technique displayed that the peak position of F2g mode gradually shifted to lower frequencies from 465 cm^–1 for x=0.00 to 440 cm^–1 for x=0.20. The catalytic effects of Ce1-x（Fe0.5Eu0.5）xO2-δsolid solutions on the electrochemistry properties of Mg2Ni/Ni were measured by mixing them together via ball milling technique. The electrochemical properties of the Mg_2Ni/Ni-Ce1-x（Fe0.5Eu0.5）xO2-δcomposites showed that the maximum discharge capability Cmax and the cycle stability were improved obviously. Meanwhile, the EIS characteristic also indicated that the doped solid solutions could enhance the rate of charge transfer on the surface of alloy. The catalytic effect of the solid solutions was speculated to rely on both the concentration of oxygen vacancies and the cell volumes of the solid solutions.展开更多
In order to reduce the oxidizing and volatilizing caused by Mg element in the traditional methods for synthesizing Mg2Sil-xSnx （x=0.2, 0.4, 0.6, 0.8） solid solutions, microwave irradiation techniques were used in pr...In order to reduce the oxidizing and volatilizing caused by Mg element in the traditional methods for synthesizing Mg2Sil-xSnx （x=0.2, 0.4, 0.6, 0.8） solid solutions, microwave irradiation techniques were used in preparing them as thermoelectric materials. Structure and phase composition of the obtained materials were investigated by X-ray diffraction （XRD）. The electrical conductivity, Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 750 K. It is found that Mg2Si1-xSnx solid solutions are well formed with excessive content of 5% （molar fraction） Mg from the stoichiometric MgESil.xSnx under microwave irradiation. A maximum dimensionless figure of merit, ZT, of about 0.26 is obtained for Mg2Si1-xSnx solid solutions at about 500 K for x=0.6.展开更多
The hydrogen absorption/desorption kinetic properties of MgH_(2)can be effectively enhanced by doping specific catalysts.In this work,MOFs-derived NiCu@C nanoparticles(~15 nm)with regular core-shell structure were suc...The hydrogen absorption/desorption kinetic properties of MgH_(2)can be effectively enhanced by doping specific catalysts.In this work,MOFs-derived NiCu@C nanoparticles(~15 nm)with regular core-shell structure were successfully prepared and introduced into MgH_(2)(denoted as MgH_(2)-NiCu@C).The onset and peak temperatures of hydrogen desorption of MgH_(2)-11 wt.%NiCu@C are 175.0℃and282.2℃,respectively.The apparent activation energy of dehydrogenated reaction is 77.2±4.5 kJ/mol for MgH_(2)-11 wt.%NiCu@C,which is lower than half of that of the as-milled MgH_(2).Moreover,MgH_(2)-11 wt.%NiCu@C displays great cyclic stability.The strengthening"hydrogen pumping"effect of reversible solid solutions Mg_(2)Ni(Cu)/Mg_(2)Ni(Cu)H_(4)is proposed to explain the remarkable improvement in hydrogen absorption/desorption kinetic properties of MgH_(2).This work offers a novel perspective for the design of bimetallic nanoparticles and beyond for application in hydrogen storage and other energy related fields.展开更多
Based on the free volume theory, lattice model, the Scatchard–Hildebrand theory, novel expressions of configuration partition function and excessive Gibbs free energy and component activity coefficients of solid solu...Based on the free volume theory, lattice model, the Scatchard–Hildebrand theory, novel expressions of configuration partition function and excessive Gibbs free energy and component activity coefficients of solid solutions were developed using configuration partition function and statistical thermodynamics of molecular interaction volume model (MIVM). Herein, the separation of the volume and energy parameters was achieved. The proposed model can reflect the contributions from both the molecular configuration micro-state number (entropy) and molecular interactions (enthalpy) toward excessive Gibbs free energy. The proposed equations are more consistent with the practical solid solutions. This model can use either the relevant binary infinite dilution activity coefficients or binary activity to describe and predict the thermodynamic properties of the multi-component solid solutions. Applications of the proposed model in some typical binary and ternary solid solution alloys revealed that the thermodynamic properties predicted by the proposed model were consistent with the experimental data and the proposed model was found to be superior to MIVM in terms of the prediction performance. Hence, it can be concluded that the proposed model exhibits good physical basis, applicability, stability and reliability.展开更多
The Ce_xTh_(1-x)O_2 solid solutions were prepared by citrate sol-gel method,and their structure and reduction properties were studied. XRD shows that solid solution with cubicphase formed in all the solid solutions (x...The Ce_xTh_(1-x)O_2 solid solutions were prepared by citrate sol-gel method,and their structure and reduction properties were studied. XRD shows that solid solution with cubicphase formed in all the solid solutions (x = 0.2, 0.5, 0.8) Ce_xTh_(1-x)O_2. Raman spectrum showsthat Ce-Th complex oxides can promote the formation of oxygen vacancies. Two reduction peaks appearin the TPR profiles of Ce_xTh_(1-x)O_2 solid solution. The a peak is attributed to the reduction ofCe^(4+) on the surface, and the β peak is attributed to the reduction of bulk CeO_2. Theincorporation of Th atom into CeO_2 improves the reduction of CeO_2. Ce_xTh_(1-x)O_2 mixed oxidesare promising materials for oxygen vacancies produced, as well as catalysts for many reactionsinvolved oxygen, such as the catalysts for three-way reactions for reducing the releasing pollutantsor combustion of VOCs.展开更多
The thermodynamic stability and lithiated/delithiated potentials of LiFexMn1-xPO4 were studied with density functional theorical calculations. The results show that the formation free energy of the LiFexMn1-xPO4 solid...The thermodynamic stability and lithiated/delithiated potentials of LiFexMn1-xPO4 were studied with density functional theorical calculations. The results show that the formation free energy of the LiFexMn1-xPO4 solid solution is slightly higher than that of the phase-separated mixture of LiFePO4 and LiMnPO4, and the two forms may co-exist in the actual LiFexMn1-xPO4 materials. The calculation manifests that the lithiated/delithiated potentials of LiFexMn1-xPO4 solid solutions vary via the Mn/Fe ratio and the spatial arrangements of the transition metal ions, and the result is used to explain the shape of capacity-voltage curves. Experimentally, we have synthesized the LiFexMn1-xPO4 materials by solid-phase reaction method. The existence of the LiFexMn1-xPO4 solid solution is thought to be responsible for the appearance of additional capacity-voltage plateau observed in the experiment.展开更多
The electronic structure and thermoelectric（TE） properties of Mg2GexSn1-x（x = 0.25, 0.50, 0.75） solid solutions are investigated by first-principles calculations and semi-classical Boltzmann theory. The special qu...The electronic structure and thermoelectric（TE） properties of Mg2GexSn1-x（x = 0.25, 0.50, 0.75） solid solutions are investigated by first-principles calculations and semi-classical Boltzmann theory. The special quasi-random structure（SQS） is used to model the solid solutions, which can produce reasonable band gaps with respect to experimental results.The n-type solid solutions have an excellent thermoelectric performance with maximum zT values exceeding 2.0, where the combination of low lattice thermal conductivity and high power factor（PF） plays an important role. These values are higher than those of pure Mg2Sn and Mg2Ge. The p-type solid solutions are inferior to the n-type ones, mainly due to the much lower PF. The maximum zT value of 0.62 is predicted for p-type Mg2Ge（0.25）Sn（0.75） at 800K. The results suggest that the n-type Mg2GexSn1-x solid solutions are promising mid-temperature TE materials.展开更多
基金Supported by the Doctoral Research Start-up Project of Yuncheng University(YQ-2023067)Project of Shanxi Natural Science Foundation(202303021211189)+1 种基金Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Provinces(20220036)Shanxi ProvinceIntelligent Optoelectronic Sensing Application Technology Innovation Center and Shanxi Province Optoelectronic Information Science and TechnologyLaboratory,Yuncheng University.
文摘In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.
基金Project supported by the State Key Research Project of Shandong Natural Science Foundation(ZR2020KB019)the fund of"Two-Hundred Talent"Plan of Yantai City+1 种基金the National Natural Science Foundation of China(11974013)the Natural Science Foundation of Fujian Province(2022J011270)。
文摘The low-dose X-ray induced long afterglow near infrared(NIR)luminescence from Cr^(3+)doped Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions was investigated.The structure analysis shows the good formation of Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions,which possesses a cubic spinel structure with Fd3m space group.The formation of Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions induces the obvious increase of long afterglow near infrared luminescence excited by low-dose X-ray,When the content of doped Cd^(2+)reaches 0.1,the low-dose X-ray induced long afterglow NIR luminescence is the maximum.More importantly,only 5 s Xray irradiation can induce more than 6 h NIR afterglow emission,of which the afterglow luminescent intensity is still 5 times stronger than the background intensity after 6 h.The thermoluminescent results show that under the 5 s exposure of X-ray,the trap density of Zn_(0.9)Cd_(0.1)Ga_(2)O_(4):Cr^(3+)is much higher than that of ZnGa_(2)O_(4):Cr^(3+).The replacement of Cd^(2+)ions with large radius at Zn^(2+)sites causes the increase of de fects and dislocations,which results in the obvious increase of trap co ncentrations.And the addition of high-z number elements Cd^(2+)would enhance the X-ray absorption of the solid solutions,which thus can be easily excited by low-dose X-ray.Zn_(0.9)Cd_(0.1)Ga_(2)O_(4):1%Cr^(3+)solid solution is a potential candidate of lowdose X-ray induced long afterglow luminescent materials.
基金funding support from the National Key R&D Program of China(2020YFC1909105)the 2023 Basic Research Foundation Project for Universities in the Inner Mongolia Autonomous Region(2023RCTD006)+1 种基金the Major Science and Technology Project of Inner Mongolia Autonomous Region(2021ZD0016)the National Natural Science Foundation of China(51664044).
文摘To separate the phosphorus-containing phase from steel slag,the effects of B_(2)O_(3)and Na_(2)B_(4)O_(7)on the enrichment of phosphorus-containing phases in Ca_(2)SiO_(4)–Ca_(3)(PO_(4))_(2)(C_(2)S–C_(3)P)solid solution were comparatively analyzed through theoretical calculations and experimental investigations.The results indicate that the optimum reaction temperature between B_(2)O_(3)and C_(2)S–C_(3)P is 800℃.The phase compositions of C_(2)S–C_(3)P equilibrium system with 5 wt.%B_(2)O_(3)at 800℃ included Ca_(3)(PO_(4))_(2),CaSiO_(3)and Ca11B_(2)Si_(4)O_(22),among which the content of Ca_(3)(PO_(4))_(2)was the highest.For C_(2)S–C_(3)P with 5 wt.%Na_(2)B_(4)O_(7)equilibrium system,Ca_(3)(PO_(4))_(2),CaSiO_(3),Ca11B_(2)Si_(4)O_(22)and Na_(2)Ca_(2)P_(2)O_(8)were independent at 390–690℃.Ca_(3)(PO_(4))_(2)and Ca_(2)SiO_(4)precipitated in the solid solution when the addition of B_(2)O_(3)was more than 6 wt.%,and the content of Ca_(3)(PO_(4))_(2)raised with the increase in the addition of B_(2)O_(3).The main phases in the C_(2)S–C_(3)P solid solution with Na_(2)B_(4)O_(7)were(Ca_(2)SiO_(4))0.05[Ca_(3)(PO_(4))_(2)],Ca_(2)SiO_(4)and Na_(3)Ca_(6)(PO_(4))_(5)at 650℃.And when the addition of Na_(2)B_(4)O_(7)exceeded 6 wt.%,the content of Na_(3)Ca_(6)(PO_(4))_(5)increased significantly.There was no precipitation of Ca_(3)(PO_(4))_(2)or boron-containing phase in the samples with Na_(2)B_(4)O_(7),but a small proportion of Ca_(3)(PO_(4))_(2)transformed into(Ca_(2)SiO_(4))0.05[Ca_(3)(PO_(4))_(2)],and Ca^(2+)was partially replaced by Na^(+)to generate Na_(3)Ca_(6)(PO_(4))_(5).As a result,the temperature for Na_(2)B_(4)O_(7)to enrich the phosphorus-containing phase in C_(2)S–C_(3)P solid solution was lower than that for B_(2)O_(3).However,the grade of the phosphorus-containing phase for Na_(2)B_(4)O_(7)was lower than that for B_(2)O_(3).
基金the National Natural Science Foundation of China(Nos.51874049,51904036)the Science Research Project of Hunan Province Office of Education,China(No.20A024)+2 种基金the Changsha Science and Technology Program Project(No.kq1907092)the Hunan Provincial Key Laboratory of Materials Protection for Electric Power and Transportation,China(No.2019CL03)the Research and Innovation Project of Graduate Students in Changsha University of Science and Technology,China(No.CX2020SS35).
文摘The Ni−25%X(X=Fe,Co,Cu,molar fraction)solid solutions were prepared and then doped into MgH_(2) through high-energy ball milling.The initial dehydrogenation temperatures of MgH_(2)/Ni−25%X composites are all decreased by about 90℃relative to the as-milled pristine MgH_(2).The Ni−25%Co solid solution exhibits the most excellent catalytic effect,and the milled MgH_(2)/Ni−25%Co composite can release 5.19 wt.%hydrogen within 10 min at 300℃,while the as-milled pristine MgH_(2) can only release 1.78 wt.%hydrogen.More importantly,the dehydrogenated MgH_(2)/Ni−25%Co composite can absorb 5.39 wt.%hydrogen at 275℃within 3 min.The superior hydrogen sorption kinetics of MgH_(2)/Ni−25%Co can be ascribed to the actual catalytic effect of in-situ formed Mg_(2)Ni(Co)compounds.First-principles calculations show that the hydrogen absorption/desorption energy barriers of Mg/MgH_(2) systems decrease significantly after doping with transition metal atoms,which interprets well the improved hydrogen sorption properties of MgH_(2) catalyzed by Ni-based solid solutions.
基金the National Key Basic Research Program (NKBRP 20047CCA03900)the National Natural Science Foundation of China (50662002)
文摘CeZr, CeYZr, LaCeZr, LaCePrZr, LaCePrYZr, and LaCePr solid solutions were prepared via the coprecipitation method, and characterized by means of X-Ray Diffraction （XRD） and Brunauer-Emmett-Teller （BET） techniques. The oxygen storage capacity （OSC） of the solid solutions was evaluated by the pulse technique and the catalytic activity was assessed using a 4-channel catalysis device. It was seen that the solid solutions presented cubic structure. The specific surface area and thermal stability could be enhanced by doping Y into the solid solutions. Doping a small amount of La had a positive effect on the thermal durability while doping a large amount of La decreased the specific surface area and the thermal stability. LaCePrZr and LaCePrYZr solid solutions synthesized using Baotou rare earth mineral residue enriched with LaCePr after Nd extraction presented a certain higher value in specific surface area and thermal stability, thereby enabling to be used as economic catalysts for automobile exhaust purification. Coating Al2O3 or SiO2 layer on the surface of ceria-zirconia solid solutions increased the specific surface area and thermal resistance.
基金Supported by NNSFC (Nos 20671092, 20773132, 20771101)National Basic Research Program of China (No 2007BAE08B01, 2009 CB613306)
文摘Nanocrystals of Ce1-xMnxO2-δ（x=0.00,0.05,0.10,0.15,and 0.20） were synthesized by a hydrothermal reaction route.The solid solutions crystallized in a cubic fluorite structure with a particle size in the range of 11～15 nm.The incorporation of Mn ions in CeO2 resulted in a lattice volume reduction.Mn ions showed a mixed valence state of ＋2,＋3 and ＋4 in CeO2 lattice.An obvious red-shift of the absorption threshold edge was observed from the UV-visible spectrum.Compared with the bulk CeO2,Ce1-xMnxO2-δ nanocrystals exhibited a lower releasing oxygen temperature as indicated by TPR technique.
基金financially supported by the National Natural Science Foundation of China(No.41263009)the Guangxi Science and Technology Development Project(No.GuiKeZhong 1298002-3)the National Natural Science Foundation of Guangxi of China(No.2012GXNSFDA053022)
文摘A series of cadmium-calcium hydroxyapatite solid solutions was prepared by an aqueous precipitation method. By various means, the characterizations confirmed the formation of continuous solid solutions over all ranges of Cd/（Cd＋Ca） atomic ratio. In the results, both lattice parameters a and c display slight deviations from Vegard’s rule when the Cd/（Cd＋Ca） atomic ratio is greater than 0.6. The particles change from smaller acicular to larger hexagonal columnar crystals as the Cd/（Cd＋Ca） atomic ratio increases from 0-0.60 to 0.60-1.00. The area of the phosphate peak for symmetric P-O stretching decreases with the increase in Cd/（Cd＋Ca） atomic ratio, and the peak disappears when the Cd/（Cd＋Ca） atomic ratio is greater than 0.6; the two phosphate peaks of P-O stretching gradually merge together for the Cd/（Cd＋Ca） atomic ratio near 0.60. These variations can be explained by a slight tendency of larger Cd ions to occupy M（2） sites and smaller Ca ions to prefer M（1） sites in the structure.
基金supported by the National Natural Science Foundation of China(No.21671176)Post-doctoral Foundation of Henan。
文摘The aerobic,selective oxidation of hydrocarbons via C-H bond activation is still a challenge.This work shows the achievement of the room temperature visible light driven photocatalytic activation of benzylic C-H bonds with N-hydroxysuccinimide over BiOBr_(x)I_(1-x)(0≤x≤1)solid solutions,whose valance bands were engineered through varying the ratio of bromide to iodide.The optimal BiOBr0.85I0.15 catalyst exhibited over 98%conversion ratio of ethylbenzene,which was about 3.9 and 8.9 times that of pure BiOBr and BiOI,respectively.The excellent photocatalytic activity of BiOBr0.85I0.15 solid solution can be ascribed to the orbital hybridization of the valence band containing both Br 4p and I 5p orbitals,which could promote photo-induced charge carrier separation and improve the generation of singlet oxygen.This work shed some light on the rational design of photocatalysts for targeted organic transformation.
文摘Samples of Ag<sub>8</sub>Ge<sub>1-x</sub>Mn<sub>x</sub>Te<sub>6</sub> solid solutions with different manganese content (x = 0, 0.05, 0.1, 0.2) were prepared by fusing and further pressing their powders under the pressure of 0.6 GPa. In addition of Mn atoms to the Ag<sub>8</sub>GeTe<sub>6</sub> compound leads to compression of their lattice. All p-type samples acquire a high resistance below the transition at temperatures of 180 - 220 K. The electrical conductivity of all compositions in the range of 220 - 300 K increases due to hopping mechanism, and at temperatures T > 320 K, a semiconductor characteristic is observed. By studying impedance spectra of samples, it was established that at 80 K solid solutions behave like a homogeneous dielectric material. At high temperatures and frequencies of an external electric field, a significant role of grain boundaries in conductivity was revealed. The dielectric anomaly occurring at low frequencies is also associated with an effect that manifests itself in the grain boundary.
文摘Electrical parameters of n-type InPxAs1-x solid solution crystals have been investigated in the range of 4.2-300 K. Theoretical calculations of current carriers mobility have been carried out and they are in good agreement with experimental results. The contribution of current carriers scattering main mechanisms has been determined. Comparison of experimental and theoretical data has shown minor contribution of disorder scattering associated with the disordered arrangement of atoms in InPxAs1-x solid solutions. Contribution of the disorder scattering increases with increasing of InP composition in solid solutions system at fixed temperatures and weakens with lowering of temperature and never dominates. A maximal share of the ＂alloy＂ scattering observed in experimental samples of lnPxAs1-x solid solutions differs from the similar scattering in SiGe alloys. It does not exceed - 20% of total scattering at 300 K and - 10% at lower temperature. A relative small contribution of disorder scattering is important for the devices designed on the base of InPxAs1-x system.
基金supported by the National Natural Science Foundations of China(51501095,51371094)the Natural Science Foundation of Inner Mongolia(2017MS(LH)0516)
文摘Nanosized Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions（x = 0.00-0.20） were synthesized by means of hydrothermal method.Then the solid solutions were ball milled with Mg2Ni and Ni powders for 20 h to get the Mg2Ni–Ni–5 mol% Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） composites.The structures and spectrum characteristics of the Ce^1-x）（Nd^0.5）Eu^0.5））xO^2-δ） solid solutions catalysts were analyzed systemically.XRD results showed that the doped samples exhibited single phase of CeO2 fluorite structure.The cell parameters and cell volumes were increased with increasing the doped content.Raman spectrum revealed that the peak position of F^2g mode shift to higher wavenumbers and the peak corresponding to oxygen vacancies were observed distinctly for the doped samples.UV-Vis technique indicated that the absorption peaks of Eu^3＋ and Nd^3＋ ions appeared; the bandgap energy was decreased linearly.The electrochemical and kinetic properties of the Mg2Ni–Ni–5 mol% Ce1-x（Nd0.5Eu0.5xO2-δ composites were measured.The maximum discharge capacity was increased from 722.3 mA h/g for x = 0.00 to 819.7 mA h/g for x = 0.16,and the cycle stability S20 increased from 25.0%（x = 0.00） to 42.2%（x = 0.20）.The kinetic measurement proved that the catalytic activity of composite surfaces and the hydrogen diffusion rate were improved for the composites with doped catalysts,especially for the composites with x = 0.16 and x = 0.20.The catalysis mechanism was analyzed from the point of microstructure and spectrum features of the Ce1-x（Nd0.5Eu0.5）xO2-δ solid solutions.
基金financially supported by the National Natural Science Foundation of China (21673290, U1662103)~~
文摘Nanosize cerium-zirconium solid solution(CZO)with a special fluorite structure has received an increasing research interest due to their remarkable advantages such as excellent oxygen storage capacity and great flexibility in their composition and structure.By partial metal(including rare earth,transition,alkaline earth or other metal)doping into CZO,the physicochemical properties of these catalytic materials can be controllable adjusted for the study of specific reactions.To date,nanosize CZO has been prepared by co-precipitation,sol-gel,surfactant-assisted approach,solution combustion,micro-emulsion,high energy mechanical milling,etc.The advent of these methodologies has prompted researchers to construct well-defined networks with customized micromorphology and functionalities.In this review,we describe not only the basic structure and synthetic strategies of CZO,but also their relevant applications in environmental catalysis,such as the purification for CO,nitrogen oxides(NOx),volatile organic compounds(VOC),soot,hydrocarbon(HC),CO2 and solid particulate matters(PM),and some reaction mechanisms are also summarized.
基金supported by the National Natural Science Foundation of China (21263015,21567016 and 21503106)the Education Department Foundation of Jiangxi Province (KJLD14005 and GJJ150016)the Natural Science Foundation of Jiangxi Province (20142BAB213013 and 20151BBE50006),which are greatly acknowledged by the authors~~
文摘A series of SnO2‐based catalysts modified by Mn, Zr, Ti and Pb oxides with a Sn/M （M=Mn, Zr, Ti and Pb） molar ratio of 9/1 were prepared by a co‐precipitation method and used for CH4 and CO oxidation. The Mn3＋, Zr4＋, Ti4＋and Pb4＋cations are incorporated into the lattice of tetragonal rutile SnO2 to form a solid solution structure. As a consequence, the surface area and thermal stability of the catalysts are improved. Moreover, the oxygen species of the modified catalysts become easier to be reduced. Therefore, the oxidation activity over the catalysts was improved, except for the one modified by Pb oxide. Manganese oxide demonstrates the best promotional effects for SnO2. Using an X‐ray diffraction extrapolation method, the lattice capacity of SnO2 for Mn2O3 was 0.135 g Mn2O3/g SnO2, which indicates that to form stable solid solution, only 21%Sn4＋cations in the lattice can be maximally replaced by Mn3＋. If the amount of Mn3＋cations is over the capacity, Mn2O3 will be formed, which is not favorable for the activity of the catalysts. The Sn rich samples with only Sn‐Mn solid solution phase show higher activity than the ones with excess Mn2O3 species.
基金Project supported by the National Natural Science Foundation of China(51501059)Talent Incubation Funding of School of Materials and Metallurgy and Inner Mongolia University of Science and Technology(2014CY012)
文摘Nanosized Fe^3＋ and Eu^3＋ codoped CeO2 solid solutions were synthesized via hydrothermal method. The crystalline structure of Ce1-x（Fe0.5Eu0.5）xO2-δx=0.00–0.30） solid solutions was carried out by the X-ray diffraction technique, and the spectrum features were identified by UV-Vis and Raman spectroscopy, respectively. It was observed that the cell parameters were first increased then decreased by increasing the doped ions content. The phase separation was detected when the dopant concentration reached to x=0.30. UV-Vis spectrum showed that the width of the band gap gradually reduced by increasing the doped content, and the solid solubility was determined to be x=0.20. The Raman technique displayed that the peak position of F2g mode gradually shifted to lower frequencies from 465 cm^–1 for x=0.00 to 440 cm^–1 for x=0.20. The catalytic effects of Ce1-x（Fe0.5Eu0.5）xO2-δsolid solutions on the electrochemistry properties of Mg2Ni/Ni were measured by mixing them together via ball milling technique. The electrochemical properties of the Mg_2Ni/Ni-Ce1-x（Fe0.5Eu0.5）xO2-δcomposites showed that the maximum discharge capability Cmax and the cycle stability were improved obviously. Meanwhile, the EIS characteristic also indicated that the doped solid solutions could enhance the rate of charge transfer on the surface of alloy. The catalytic effect of the solid solutions was speculated to rely on both the concentration of oxygen vacancies and the cell volumes of the solid solutions.
基金Project(2009BB4228) supported by the Natural Science Foundation of Chongqing City,ChinaProject(CK2010Z09) supported by the Research Foundation of Chongqing University of Science and Technology,China
文摘In order to reduce the oxidizing and volatilizing caused by Mg element in the traditional methods for synthesizing Mg2Sil-xSnx （x=0.2, 0.4, 0.6, 0.8） solid solutions, microwave irradiation techniques were used in preparing them as thermoelectric materials. Structure and phase composition of the obtained materials were investigated by X-ray diffraction （XRD）. The electrical conductivity, Seebeck coefficient and thermal conductivity were measured as a function of temperature from 300 to 750 K. It is found that Mg2Si1-xSnx solid solutions are well formed with excessive content of 5% （molar fraction） Mg from the stoichiometric MgESil.xSnx under microwave irradiation. A maximum dimensionless figure of merit, ZT, of about 0.26 is obtained for Mg2Si1-xSnx solid solutions at about 500 K for x=0.6.
基金supported by the National Natural Science Foundation of China(52071177,52171214)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX21_1112,KYCX21_1107)+1 种基金Six Talent Peaks Project in Jiangsu Province(2018,XNY-020)the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions。
文摘The hydrogen absorption/desorption kinetic properties of MgH_(2)can be effectively enhanced by doping specific catalysts.In this work,MOFs-derived NiCu@C nanoparticles(~15 nm)with regular core-shell structure were successfully prepared and introduced into MgH_(2)(denoted as MgH_(2)-NiCu@C).The onset and peak temperatures of hydrogen desorption of MgH_(2)-11 wt.%NiCu@C are 175.0℃and282.2℃,respectively.The apparent activation energy of dehydrogenated reaction is 77.2±4.5 kJ/mol for MgH_(2)-11 wt.%NiCu@C,which is lower than half of that of the as-milled MgH_(2).Moreover,MgH_(2)-11 wt.%NiCu@C displays great cyclic stability.The strengthening"hydrogen pumping"effect of reversible solid solutions Mg_(2)Ni(Cu)/Mg_(2)Ni(Cu)H_(4)is proposed to explain the remarkable improvement in hydrogen absorption/desorption kinetic properties of MgH_(2).This work offers a novel perspective for the design of bimetallic nanoparticles and beyond for application in hydrogen storage and other energy related fields.
基金This work was financially supported by Yunnan Provincial Department of Education Science Research Fund Project(Grant Nos.2018JS551,2019J0025 and 2019J0891)Scientific Research Foundation of Kunming Metallurgy College(Grant No.Xxrcxm201802).
文摘Based on the free volume theory, lattice model, the Scatchard–Hildebrand theory, novel expressions of configuration partition function and excessive Gibbs free energy and component activity coefficients of solid solutions were developed using configuration partition function and statistical thermodynamics of molecular interaction volume model (MIVM). Herein, the separation of the volume and energy parameters was achieved. The proposed model can reflect the contributions from both the molecular configuration micro-state number (entropy) and molecular interactions (enthalpy) toward excessive Gibbs free energy. The proposed equations are more consistent with the practical solid solutions. This model can use either the relevant binary infinite dilution activity coefficients or binary activity to describe and predict the thermodynamic properties of the multi-component solid solutions. Applications of the proposed model in some typical binary and ternary solid solution alloys revealed that the thermodynamic properties predicted by the proposed model were consistent with the experimental data and the proposed model was found to be superior to MIVM in terms of the prediction performance. Hence, it can be concluded that the proposed model exhibits good physical basis, applicability, stability and reliability.
文摘The Ce_xTh_(1-x)O_2 solid solutions were prepared by citrate sol-gel method,and their structure and reduction properties were studied. XRD shows that solid solution with cubicphase formed in all the solid solutions (x = 0.2, 0.5, 0.8) Ce_xTh_(1-x)O_2. Raman spectrum showsthat Ce-Th complex oxides can promote the formation of oxygen vacancies. Two reduction peaks appearin the TPR profiles of Ce_xTh_(1-x)O_2 solid solution. The a peak is attributed to the reduction ofCe^(4+) on the surface, and the β peak is attributed to the reduction of bulk CeO_2. Theincorporation of Th atom into CeO_2 improves the reduction of CeO_2. Ce_xTh_(1-x)O_2 mixed oxidesare promising materials for oxygen vacancies produced, as well as catalysts for many reactionsinvolved oxygen, such as the catalysts for three-way reactions for reducing the releasing pollutantsor combustion of VOCs.
基金supported by the Science and Technology Foundation of Jiangsu Province(BK20151237)the Special Nano-technology of Suzhou(ZXG2013004)+2 种基金USTC-NSRL Association Fundingthe Collaborative Innovation Centre of Suzhou Nano Science and Technologythe Supercomputation Center of USTC
文摘The thermodynamic stability and lithiated/delithiated potentials of LiFexMn1-xPO4 were studied with density functional theorical calculations. The results show that the formation free energy of the LiFexMn1-xPO4 solid solution is slightly higher than that of the phase-separated mixture of LiFePO4 and LiMnPO4, and the two forms may co-exist in the actual LiFexMn1-xPO4 materials. The calculation manifests that the lithiated/delithiated potentials of LiFexMn1-xPO4 solid solutions vary via the Mn/Fe ratio and the spatial arrangements of the transition metal ions, and the result is used to explain the shape of capacity-voltage curves. Experimentally, we have synthesized the LiFexMn1-xPO4 materials by solid-phase reaction method. The existence of the LiFexMn1-xPO4 solid solution is thought to be responsible for the appearance of additional capacity-voltage plateau observed in the experiment.
基金supported by the National Natural Science Foundation of China(Grant No.11647010)the Foundation from the Higher Education and High-quality and World-class Universities(Grant No.PY201611)
文摘The electronic structure and thermoelectric（TE） properties of Mg2GexSn1-x（x = 0.25, 0.50, 0.75） solid solutions are investigated by first-principles calculations and semi-classical Boltzmann theory. The special quasi-random structure（SQS） is used to model the solid solutions, which can produce reasonable band gaps with respect to experimental results.The n-type solid solutions have an excellent thermoelectric performance with maximum zT values exceeding 2.0, where the combination of low lattice thermal conductivity and high power factor（PF） plays an important role. These values are higher than those of pure Mg2Sn and Mg2Ge. The p-type solid solutions are inferior to the n-type ones, mainly due to the much lower PF. The maximum zT value of 0.62 is predicted for p-type Mg2Ge（0.25）Sn（0.75） at 800K. The results suggest that the n-type Mg2GexSn1-x solid solutions are promising mid-temperature TE materials.
