The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kind...The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kinds of hardware platform structures of the software radio fuze are studied and the key techniques are analysed. The software radio fuze will become the most promising radio fuze techniques in 21st century.展开更多
DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other softwar...DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other software radio solutions to the subject, we choose a universal digital radio baseband processor operating as the co-processor of DSP. Only the core algorithms for signal processing are implemented with DSP. Thus the computation burden on DSP is reduced significantly. Compared with the traditional ones, the technique mentioned in this paper is more promising and attractive. It is extremely compact and power-efficient, which is often required by a mobile communication system. The implementation of baseband signal processing for π/4-DQPSK modem on this platform is illustrated in detail. Special emphases are laid on the architecture of the system and the algorithms used in the baseband signal processing. Finally, some experimental results are presented and the performances of the signal processing and compensation algorithms are evaluated through computer simulations.展开更多
This paper reviews the requirements for Software Defi ned Radio (SDR) systems for high-speed wireless applications and compares how well the different technology choices available-from ASICs, FPGAs to digital signal p...This paper reviews the requirements for Software Defi ned Radio (SDR) systems for high-speed wireless applications and compares how well the different technology choices available-from ASICs, FPGAs to digital signal processors (DSPs) and general purpose processors (GPPs) - meet them.展开更多
The signal transceiver of the software radio fuze depends on the front-end radio frequency（ RF） antenna. RF micro-electro-mechanical-system（ MEMS） smart antennas have the capability of flexible beam rapid scanning...The signal transceiver of the software radio fuze depends on the front-end radio frequency（ RF） antenna. RF micro-electro-mechanical-system（ MEMS） smart antennas have the capability of flexible beam rapid scanning,multi-beam forming and so on,which can improve the ability of detecting,sensing and tracking multiple targets of the fuze. The small RF MEMS smart antenna consists of a 2 × 2 aperture coupled antenna array and six 1-bit MEMS phase shifters. Simulated results demonstrate that the antenna can complete beam steering angles of ± 30° in both X and Y plane at 17. 3 GHz. All components can be fabricated and monolithically integrated with MEMS technology which causes the system low cost and small volume. The RF MEMS smart antenna presents a good and important prospect for the development of the software radio fuze antenna.展开更多
The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implem...The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implementation method is described as well as AD6620 parameter setting analysis. It also presents a flow chart of the on-line programming with the help of PC. The algorithm for demodulation AM signal is discussed.展开更多
In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is ...In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is designed.In order to increase the processing speed,Gigabit Ethernet was applied in the platform at speed of 5×10~8 bit/s.By appropriate design of interpolant according to the position of input RF signals,multi-band receiving can be realized in the platform with suppression more than 35 d B without changing hardware.展开更多
Modern handheld target detection methods are typically restricted to line of sight （LOS） techniques. The design of a new method to detect moving targets through non-transparent surfaces could greatly aid the safety ...Modern handheld target detection methods are typically restricted to line of sight （LOS） techniques. The design of a new method to detect moving targets through non-transparent surfaces could greatly aid the safety of hazardous military and government operations. In this paper, we develop through-wall virtual imaging using Wi-Fi enabled software defined radio to see moving objects and their relative locations. We use LabVIEW and NI Universal Software Radio Peripheral （NI USRP2921 radios with Ettus Research LP0965 directive antennas） devices to detect moving objects behind walls by sending and receiving a signal with respect to the USRP＇s location. Based on the signal-to-interference ratio of our signal （rather than the traditional signal-to-noise method）, we could determine the target object behind the wall. The two major applications for this project are： detecting an active shooter that is standing on the other side of the wall and detecting abnormalities in the human body such as breast cancer with more sensitive antennas. Likewise, firefighters, law enforcement officers, and military men would find more practical purposes for the use of this system in their fields. We evaluate the proposed model using experimental results.展开更多
Software Defined Radio (SDR) architecture allows us to integrate different mobile technologies using common hardware but with different software modules. To achieve this, we need to keep the signal in digital form for...Software Defined Radio (SDR) architecture allows us to integrate different mobile technologies using common hardware but with different software modules. To achieve this, we need to keep the signal in digital form for as much portion of the circuitry as possible, so that the implementation could be carried out by programmable digital processors. For this purpose, the incoming radio frequency (RF) signal is down converted to baseband spectrum using band pass sampling method. Research works carried out so far in this field have developed a few algorithms for band pass sampling. But, these algorithms are not much useful for most of the mobile communication systems and they use complex methodology for computing the sampling frequency values. In order to use the SDR platform to integrate all current wireless technologies, an efficient, cost effective and less complex algorithm that can be labelled as universal band pass sampling algorithm is developed in this paper for multiple mobile systems. This algorithm is based on a novel idea of inserting guard bands between the signals which reduces the design complexities of perfect ADC and sharp cut off filters. Using this algorithm, valid sampling frequency ranges and corresponding IF values are calculated for down converting RF signals. The algorithm is tested for six RF signals of different wireless technologies which are integrated and simultaneously down converted using SDR based front end receiver and thus the system multiplies the base station capacity by a factor of six. The simulation results are obtained and shown in this paper which proves that the algorithm developed works well for most of the wireless technologies.展开更多
Due to the fact that the conventional spectrum sensing algorithm is susceptible to noise, an adaptive double-threshold energy detection algorithm for a cognitive radio is proposed. Based on double-threshold energy det...Due to the fact that the conventional spectrum sensing algorithm is susceptible to noise, an adaptive double-threshold energy detection algorithm for a cognitive radio is proposed. Based on double-threshold energy detection, the algorithm can adaptively switch between one-round sensing and two-round sensing by comparing the observations with the pre-fixed thresholds. Mathematical expressions for the probability of detection, the probability of false alarm, and the sensing time are derived. The relationships including signal to noise ratio （SNR） vs. the probability of detection and SNR vs. the sensing time are plotted using Monte Carlo simulation and the algorithm is verified in a real cognitive system based on GNU Radio and universal software radio peripheral （USRP）. Simulation and experimental results show that, compared with the existing spectrum sensing method, the proposed algorithm can achieve a higher probability of detection within a reasonable sensing time.展开更多
Suppressing jitter noises in a phase locked loop（ PLL） is of great importance in order to keep precise and continuous track of global positioning system （GPS）signals characterized by low carrier-to-noise ratio（ C...Suppressing jitter noises in a phase locked loop（ PLL） is of great importance in order to keep precise and continuous track of global positioning system （GPS）signals characterized by low carrier-to-noise ratio（ C/No ）. This article proposes and analyzes an improved Kalman-filter-based PLL to process weak carrier signals in GPS software receivers. After reviewing the optimal-bandwidth-based traditional second-order PLL, a Kalman-filter-based estimation algorithm is implemented for the new PLL by decorrelating the model error noises and the measurement noises. Finally,the efficiency of this new Kalman-filter-based PLL is verified by experimental data. Compared to the traditional second-order PLL, this new PLL is in position to make correct estimation of the carrier phase differences and Doppler shifts with less overshoots and noise disturbances and keeps an effective check on the disturbances out of jitter noises in PLL. The results show that during processing normal signals,this improved PLL reduces the standard deviation from 0. 010 69 cycle to 0. 007 63 cycle, and for weak signal processing,the phase jitter range and the Doppler shifts can be controlled within ± 17° and ±5 Hz as against ±25° and ＋ 15 Hz by the traditional PLL.展开更多
Wireless local area network(WLAN) is an indivisible part of the next generation wireless system. In this paper, an open Wi-Fi platform is designed and developed with special consideration of real-time signal processin...Wireless local area network(WLAN) is an indivisible part of the next generation wireless system. In this paper, an open Wi-Fi platform is designed and developed with special consideration of real-time signal processing. Such system can help accelerate research and development of future wireless network, especially in the case of cellular/Wi-Fi co-existing networks. This platform is based on the Intel general-purpose processor and the universal software radio peripheral(USRP) radio front end. The design including the physical layer implementations is purely software and is optimized for real-time signal processing on the general purpose processor. In the lab experiment, this platform supports baseband rate up to 700 Mbps with 2 transmitters in 80 MHz bandwidth. A cellular-Wi-Fi signaling interface between the Wi-Fi access point(AP) and the 5G core network is also developed and validated as an example for wireless resource allocation.展开更多
This paper aims to present a digital radio broadcasting system that explores the advantages of pseudo-random codes. In this context, a transmitter and its dual receiver are able to reuse frequency spectrum bands witho...This paper aims to present a digital radio broadcasting system that explores the advantages of pseudo-random codes. In this context, a transmitter and its dual receiver are able to reuse frequency spectrum bands without interfering on other existing communication systems. It is proposed a communication system that allows radio broadcasting with the following characteristics: lower transmission power, new communication channels and digital signal processing techinques to add positioning services in two dimensions.展开更多
In the study and implementation of a programmable RS codec module in satellite communication modem, FPGA is used as the kernel in the implementation, while some ASICs are used as necessary assistant measures. The modu...In the study and implementation of a programmable RS codec module in satellite communication modem, FPGA is used as the kernel in the implementation, while some ASICs are used as necessary assistant measures. The module includes the RS codec unit, the interleaver and deinterleaver unit, the scrambler and descrambler unit and the frame synchronization unit. The module is realized successfully and it can be programmed on-line to meet the requirements of IESS 308/309/310 including many specifications about different service types and data rates. With the implementation combining FPGA with ASICs, size of the circuit is much reduced, its flexibility dramatically increased, and its stability further strengthened. Furthermore, the module is based on the software radio concept and can be easily integrated into the whole satellite communication modem.展开更多
The ionospheric oblique backscattering sounding system can not only be used to detect the state of the ionosphere and the condition of high frequency channel in real time, but also be used for over-the-horizon soundin...The ionospheric oblique backscattering sounding system can not only be used to detect the state of the ionosphere and the condition of high frequency channel in real time, but also be used for over-the-horizon sounding. Therefore, it has a very high military and civil value. For the characteristics of ionospheric oblique backscattering sounding, such as long sounding distance, wake echo, strong background noise, slow moving target, etc., a hardware platform of ionospheric oblique backscattering sounding system is designed. This platform adopts the technology of software radio and is designed as a new kind of general purpose, modularized, software-based ionosonde that is based on the VXI （Versa module eurocard eXtensions for Instrumentation） bus. This hardware platform has been successfully used in actual ionospheric oblique backscattering sounding, and the experimental results demonstrate that this system can satisfy the requirements.展开更多
Parameter estimation of signals of universal software radio peripheral （USRP） devices is crucial to solve the problem of phase offsets of received signals in distributed beamforming. For systems that will utilize th...Parameter estimation of signals of universal software radio peripheral （USRP） devices is crucial to solve the problem of phase offsets of received signals in distributed beamforming. For systems that will utilize the closed loop feedback algorithm where the receiver needs to send the received signal strength （RSS） values periodically to the beamforming node so as to take advantage of energy conservation, the frequency and phase of these signals should be estimated before smoothening by nonlinear filters. This article presents the estimation of the frequency offsets of a Gaussian minimum shift keying （GMSK） signal from N210 USRP devices in real time by using the Radix-2 fast Fourier transform （FFT） algorithm in GNURadio. For these green communications devices, most of the needed hardware parts have been software defined, thereby reducing the supposed energy consumption. The frequency offsets from reference carrier frequencies of 900 MHz and 2.4 GHz are less than 3 kHz each before the estimation, but the average offsets are 45 Hz and 100 Hz after the estimation, respectively. The high offset value experienced with the 2.4 GHz carrier was due to consistent interference from devices on that same frequency.展开更多
According to the algorithm of the fuze antenna beamforming and the requirement for the realtime performenee, a fuze antenna beamformer based on digital signal processor （DSP） was designed. The program was written in...According to the algorithm of the fuze antenna beamforming and the requirement for the realtime performenee, a fuze antenna beamformer based on digital signal processor （DSP） was designed. The program was written in C, and in order to reduce the operation time of DSP, the key part of the matrix operation was written in simple algorithm. The precise and speediness of DSP calculation results were analyzed through Matlab and the Profiling tools in Code Composer Studio （CCS）. The results show that the precise and the speediness both can satisfy the requirement for the fuze antennh beamforming.展开更多
Based on the analysis of the impact of Doppler shift to the railway dedicated mobile communication quality under the condition of high-speed mobility,this paper presents a Doppler shift measurement approach based on t...Based on the analysis of the impact of Doppler shift to the railway dedicated mobile communication quality under the condition of high-speed mobility,this paper presents a Doppler shift measurement approach based on the phase estimation of frequency correction channel(FCCH) which correctly reflects the time-varying characteristic of the channel with a testing system developed.The Doppler shift data under the high-speed condition is collected,processed,analyzed,and compared with the simulation results.The scientific laws of the Doppler shift distribution of radio channel under high-speed condition are obtained.These data and analysis are essential for the establishment of high-speed railway Doppler power spectrum model and the development of the key technology of antiDoppler shift.展开更多
In Electronic Warfare, and more specifically in the domain of passive localization, accurate time synchronization between platforms is decisive, especially on systems relying on TDOA （time difference of arrival） and...In Electronic Warfare, and more specifically in the domain of passive localization, accurate time synchronization between platforms is decisive, especially on systems relying on TDOA （time difference of arrival） and FDOA （frequency difference of arrival）. This paper investigates this issue by presenting an analysis in terms of final localization performance of an experimental passive localization system based on off-the-shelf components. This system is detailed, as well as the methodology used to carry out the acquisition of real data. This experiment has been realized with two different kinds of clock. The results are analyzed by calculating the Allan deviation and time deviation. The choice of these metrics is explained and their properties are discussed in the scope of an airborne bi-platform passive localization context. Conclusions are drawn regarding the overall localization performance of the system.展开更多
Channelization typically realized by digital filter banks is an important topic in high frequency(HF) communication and software defined radios(SDR) areas. Channelization has a rigorous requirement for the characteris...Channelization typically realized by digital filter banks is an important topic in high frequency(HF) communication and software defined radios(SDR) areas. Channelization has a rigorous requirement for the characteristic of frequency response, e.g., steep transitional band and sharp decay. To address this issue, we investigated the feasibility and implementation of applying fast filter bank(FFB) in channelization in this paper. We analyzed the butterfly structure of FFB similar with fast Fourier transform(FFT), in which prototype sub-filters are cascaded to achieve a low complexity. Hence, it is suitable for designing filter bank with steep transitional band and sharp decay in stop-band. Moreover, we designed a pipelined structure of FFB to achieve a balance between area and performance. Design example shows that FFB has lower computational complexity compared with the other filter banks.展开更多
A real-time ray-based hardware emulator for Unmanned Aerial Vehicle(UAV) communication channels which suits for the Three-Dimensional(3D) dynamic scenarios and considers the movements of both terminals is developed in...A real-time ray-based hardware emulator for Unmanned Aerial Vehicle(UAV) communication channels which suits for the Three-Dimensional(3D) dynamic scenarios and considers the movements of both terminals is developed in this paper. The time-variant channel parameters, i.e.,ray delay, ray gain, and ray Doppler frequency are precalculated in the host by using the Ray Tracing(RT) method. Meanwhile, RT simulation dramatically increases the number of valid rays. To address the problem of resource limitation and huge computational burden in the implementation,an efficient ray coefficients generation method based on iteration is proposed and implemented.With the advantages of low cost and high flexibility, a Software Defined Radio(SDR) hardware platform is used to emulate the ray-based UAV channels by utilizing the compact architecture including the Time-Division(TD) scheme and Tapped-Delay Line(TDL) for channel convolution.Finally, hardware measurement results demonstrate that the properties of emulated channel, i.e.,Power Delay Profile(PDP) and Doppler Power Spectrum Density(DPSD) consist with the simulated ones, which verifies the correctness of hardware implementation. The proposed channel emulator provides an efficient way for optimization, verification, and evaluation of UAV communication systems.展开更多
文摘The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kinds of hardware platform structures of the software radio fuze are studied and the key techniques are analysed. The software radio fuze will become the most promising radio fuze techniques in 21st century.
文摘DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other software radio solutions to the subject, we choose a universal digital radio baseband processor operating as the co-processor of DSP. Only the core algorithms for signal processing are implemented with DSP. Thus the computation burden on DSP is reduced significantly. Compared with the traditional ones, the technique mentioned in this paper is more promising and attractive. It is extremely compact and power-efficient, which is often required by a mobile communication system. The implementation of baseband signal processing for π/4-DQPSK modem on this platform is illustrated in detail. Special emphases are laid on the architecture of the system and the algorithms used in the baseband signal processing. Finally, some experimental results are presented and the performances of the signal processing and compensation algorithms are evaluated through computer simulations.
文摘This paper reviews the requirements for Software Defi ned Radio (SDR) systems for high-speed wireless applications and compares how well the different technology choices available-from ASICs, FPGAs to digital signal processors (DSPs) and general purpose processors (GPPs) - meet them.
文摘The signal transceiver of the software radio fuze depends on the front-end radio frequency（ RF） antenna. RF micro-electro-mechanical-system（ MEMS） smart antennas have the capability of flexible beam rapid scanning,multi-beam forming and so on,which can improve the ability of detecting,sensing and tracking multiple targets of the fuze. The small RF MEMS smart antenna consists of a 2 × 2 aperture coupled antenna array and six 1-bit MEMS phase shifters. Simulated results demonstrate that the antenna can complete beam steering angles of ± 30° in both X and Y plane at 17. 3 GHz. All components can be fabricated and monolithically integrated with MEMS technology which causes the system low cost and small volume. The RF MEMS smart antenna presents a good and important prospect for the development of the software radio fuze antenna.
文摘The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implementation method is described as well as AD6620 parameter setting analysis. It also presents a flow chart of the on-line programming with the help of PC. The algorithm for demodulation AM signal is discussed.
基金Project(2013QNA49)supported by the Fundamental Research Funds for the Central Universities,China
文摘In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is designed.In order to increase the processing speed,Gigabit Ethernet was applied in the platform at speed of 5×10~8 bit/s.By appropriate design of interpolant according to the position of input RF signals,multi-band receiving can be realized in the platform with suppression more than 35 d B without changing hardware.
基金Acknowledgements This work was supported in part by the U.S. National Science Foundation （NSF） under grants CNS-1405670 and CN5-1658972. However, any opinions, findings, and conclusions or recommendations expressed in this material are those of the author and do not necessarily reflect the views of the NSE
文摘Modern handheld target detection methods are typically restricted to line of sight （LOS） techniques. The design of a new method to detect moving targets through non-transparent surfaces could greatly aid the safety of hazardous military and government operations. In this paper, we develop through-wall virtual imaging using Wi-Fi enabled software defined radio to see moving objects and their relative locations. We use LabVIEW and NI Universal Software Radio Peripheral （NI USRP2921 radios with Ettus Research LP0965 directive antennas） devices to detect moving objects behind walls by sending and receiving a signal with respect to the USRP＇s location. Based on the signal-to-interference ratio of our signal （rather than the traditional signal-to-noise method）, we could determine the target object behind the wall. The two major applications for this project are： detecting an active shooter that is standing on the other side of the wall and detecting abnormalities in the human body such as breast cancer with more sensitive antennas. Likewise, firefighters, law enforcement officers, and military men would find more practical purposes for the use of this system in their fields. We evaluate the proposed model using experimental results.
文摘Software Defined Radio (SDR) architecture allows us to integrate different mobile technologies using common hardware but with different software modules. To achieve this, we need to keep the signal in digital form for as much portion of the circuitry as possible, so that the implementation could be carried out by programmable digital processors. For this purpose, the incoming radio frequency (RF) signal is down converted to baseband spectrum using band pass sampling method. Research works carried out so far in this field have developed a few algorithms for band pass sampling. But, these algorithms are not much useful for most of the mobile communication systems and they use complex methodology for computing the sampling frequency values. In order to use the SDR platform to integrate all current wireless technologies, an efficient, cost effective and less complex algorithm that can be labelled as universal band pass sampling algorithm is developed in this paper for multiple mobile systems. This algorithm is based on a novel idea of inserting guard bands between the signals which reduces the design complexities of perfect ADC and sharp cut off filters. Using this algorithm, valid sampling frequency ranges and corresponding IF values are calculated for down converting RF signals. The algorithm is tested for six RF signals of different wireless technologies which are integrated and simultaneously down converted using SDR based front end receiver and thus the system multiplies the base station capacity by a factor of six. The simulation results are obtained and shown in this paper which proves that the algorithm developed works well for most of the wireless technologies.
基金The National Science and Technology Major Project (No. 2010ZX03006-002-01)the National Natural Science Foundation of China(No. 60972026 )the Cultivation Fund of the Key Scientific and Technical Innovation Project, Ministry of Education of China (No. 708046)
文摘Due to the fact that the conventional spectrum sensing algorithm is susceptible to noise, an adaptive double-threshold energy detection algorithm for a cognitive radio is proposed. Based on double-threshold energy detection, the algorithm can adaptively switch between one-round sensing and two-round sensing by comparing the observations with the pre-fixed thresholds. Mathematical expressions for the probability of detection, the probability of false alarm, and the sensing time are derived. The relationships including signal to noise ratio （SNR） vs. the probability of detection and SNR vs. the sensing time are plotted using Monte Carlo simulation and the algorithm is verified in a real cognitive system based on GNU Radio and universal software radio peripheral （USRP）. Simulation and experimental results show that, compared with the existing spectrum sensing method, the proposed algorithm can achieve a higher probability of detection within a reasonable sensing time.
基金National Natural Science Foundation of China(40671155)National High-tech Research and Development Programof China(2006AA12A108)Research Program of Hong Kong Polytech-nic University(G-U203)
文摘Suppressing jitter noises in a phase locked loop（ PLL） is of great importance in order to keep precise and continuous track of global positioning system （GPS）signals characterized by low carrier-to-noise ratio（ C/No ）. This article proposes and analyzes an improved Kalman-filter-based PLL to process weak carrier signals in GPS software receivers. After reviewing the optimal-bandwidth-based traditional second-order PLL, a Kalman-filter-based estimation algorithm is implemented for the new PLL by decorrelating the model error noises and the measurement noises. Finally,the efficiency of this new Kalman-filter-based PLL is verified by experimental data. Compared to the traditional second-order PLL, this new PLL is in position to make correct estimation of the carrier phase differences and Doppler shifts with less overshoots and noise disturbances and keeps an effective check on the disturbances out of jitter noises in PLL. The results show that during processing normal signals,this improved PLL reduces the standard deviation from 0. 010 69 cycle to 0. 007 63 cycle, and for weak signal processing,the phase jitter range and the Doppler shifts can be controlled within ± 17° and ±5 Hz as against ±25° and ＋ 15 Hz by the traditional PLL.
基金supported in part by the National Natural Science Foundation of China under Grant No. 61671436the Science and Technology Commission Foundation of Shanghai under Grant No. 15511102602, 16511104204
文摘Wireless local area network(WLAN) is an indivisible part of the next generation wireless system. In this paper, an open Wi-Fi platform is designed and developed with special consideration of real-time signal processing. Such system can help accelerate research and development of future wireless network, especially in the case of cellular/Wi-Fi co-existing networks. This platform is based on the Intel general-purpose processor and the universal software radio peripheral(USRP) radio front end. The design including the physical layer implementations is purely software and is optimized for real-time signal processing on the general purpose processor. In the lab experiment, this platform supports baseband rate up to 700 Mbps with 2 transmitters in 80 MHz bandwidth. A cellular-Wi-Fi signaling interface between the Wi-Fi access point(AP) and the 5G core network is also developed and validated as an example for wireless resource allocation.
文摘This paper aims to present a digital radio broadcasting system that explores the advantages of pseudo-random codes. In this context, a transmitter and its dual receiver are able to reuse frequency spectrum bands without interfering on other existing communication systems. It is proposed a communication system that allows radio broadcasting with the following characteristics: lower transmission power, new communication channels and digital signal processing techinques to add positioning services in two dimensions.
文摘In the study and implementation of a programmable RS codec module in satellite communication modem, FPGA is used as the kernel in the implementation, while some ASICs are used as necessary assistant measures. The module includes the RS codec unit, the interleaver and deinterleaver unit, the scrambler and descrambler unit and the frame synchronization unit. The module is realized successfully and it can be programmed on-line to meet the requirements of IESS 308/309/310 including many specifications about different service types and data rates. With the implementation combining FPGA with ASICs, size of the circuit is much reduced, its flexibility dramatically increased, and its stability further strengthened. Furthermore, the module is based on the software radio concept and can be easily integrated into the whole satellite communication modem.
基金Supported by the National Natural Science Foundation of China (40474066)
文摘The ionospheric oblique backscattering sounding system can not only be used to detect the state of the ionosphere and the condition of high frequency channel in real time, but also be used for over-the-horizon sounding. Therefore, it has a very high military and civil value. For the characteristics of ionospheric oblique backscattering sounding, such as long sounding distance, wake echo, strong background noise, slow moving target, etc., a hardware platform of ionospheric oblique backscattering sounding system is designed. This platform adopts the technology of software radio and is designed as a new kind of general purpose, modularized, software-based ionosonde that is based on the VXI （Versa module eurocard eXtensions for Instrumentation） bus. This hardware platform has been successfully used in actual ionospheric oblique backscattering sounding, and the experimental results demonstrate that this system can satisfy the requirements.
基金supported by the Ministry of Education Malaysia,Universiti Teknologi Malaysia and RUG vote 11H60
文摘Parameter estimation of signals of universal software radio peripheral （USRP） devices is crucial to solve the problem of phase offsets of received signals in distributed beamforming. For systems that will utilize the closed loop feedback algorithm where the receiver needs to send the received signal strength （RSS） values periodically to the beamforming node so as to take advantage of energy conservation, the frequency and phase of these signals should be estimated before smoothening by nonlinear filters. This article presents the estimation of the frequency offsets of a Gaussian minimum shift keying （GMSK） signal from N210 USRP devices in real time by using the Radix-2 fast Fourier transform （FFT） algorithm in GNURadio. For these green communications devices, most of the needed hardware parts have been software defined, thereby reducing the supposed energy consumption. The frequency offsets from reference carrier frequencies of 900 MHz and 2.4 GHz are less than 3 kHz each before the estimation, but the average offsets are 45 Hz and 100 Hz after the estimation, respectively. The high offset value experienced with the 2.4 GHz carrier was due to consistent interference from devices on that same frequency.
基金the Ministerial Level Advanced Research Foundation(51204BQ01)
文摘According to the algorithm of the fuze antenna beamforming and the requirement for the realtime performenee, a fuze antenna beamformer based on digital signal processor （DSP） was designed. The program was written in C, and in order to reduce the operation time of DSP, the key part of the matrix operation was written in simple algorithm. The precise and speediness of DSP calculation results were analyzed through Matlab and the Profiling tools in Code Composer Studio （CCS）. The results show that the precise and the speediness both can satisfy the requirement for the fuze antennh beamforming.
基金Supported by the National Natural Science Foundation of China(No.U133420261222105)+1 种基金the Key Grant Project of Chinese Ministry of Education(No.313006)the Project of State Key Lab of Rail Traffic Control and Safety(No.RCS 2014ZT11)
文摘Based on the analysis of the impact of Doppler shift to the railway dedicated mobile communication quality under the condition of high-speed mobility,this paper presents a Doppler shift measurement approach based on the phase estimation of frequency correction channel(FCCH) which correctly reflects the time-varying characteristic of the channel with a testing system developed.The Doppler shift data under the high-speed condition is collected,processed,analyzed,and compared with the simulation results.The scientific laws of the Doppler shift distribution of radio channel under high-speed condition are obtained.These data and analysis are essential for the establishment of high-speed railway Doppler power spectrum model and the development of the key technology of antiDoppler shift.
文摘In Electronic Warfare, and more specifically in the domain of passive localization, accurate time synchronization between platforms is decisive, especially on systems relying on TDOA （time difference of arrival） and FDOA （frequency difference of arrival）. This paper investigates this issue by presenting an analysis in terms of final localization performance of an experimental passive localization system based on off-the-shelf components. This system is detailed, as well as the methodology used to carry out the acquisition of real data. This experiment has been realized with two different kinds of clock. The results are analyzed by calculating the Allan deviation and time deviation. The choice of these metrics is explained and their properties are discussed in the scope of an airborne bi-platform passive localization context. Conclusions are drawn regarding the overall localization performance of the system.
基金supported in part by the National Natural Science Foundation of China under Grant 61601477, and 61601480
文摘Channelization typically realized by digital filter banks is an important topic in high frequency(HF) communication and software defined radios(SDR) areas. Channelization has a rigorous requirement for the characteristic of frequency response, e.g., steep transitional band and sharp decay. To address this issue, we investigated the feasibility and implementation of applying fast filter bank(FFB) in channelization in this paper. We analyzed the butterfly structure of FFB similar with fast Fourier transform(FFT), in which prototype sub-filters are cascaded to achieve a low complexity. Hence, it is suitable for designing filter bank with steep transitional band and sharp decay in stop-band. Moreover, we designed a pipelined structure of FFB to achieve a balance between area and performance. Design example shows that FFB has lower computational complexity compared with the other filter banks.
基金supported in part by CEMEE State Key Laboratory Fund(No.2020Z0207B)in part by the National Key Scientific Instrument and Equipment Development Project,China(No.61827801)+1 种基金in part by the State Key Laboratory of Integrated Services Networks Fund,China(No.ISN22-11)in part by the Fundamental Research Funds for the Central Universities,China(Nos.NS2020026 and NS2020063)。
文摘A real-time ray-based hardware emulator for Unmanned Aerial Vehicle(UAV) communication channels which suits for the Three-Dimensional(3D) dynamic scenarios and considers the movements of both terminals is developed in this paper. The time-variant channel parameters, i.e.,ray delay, ray gain, and ray Doppler frequency are precalculated in the host by using the Ray Tracing(RT) method. Meanwhile, RT simulation dramatically increases the number of valid rays. To address the problem of resource limitation and huge computational burden in the implementation,an efficient ray coefficients generation method based on iteration is proposed and implemented.With the advantages of low cost and high flexibility, a Software Defined Radio(SDR) hardware platform is used to emulate the ray-based UAV channels by utilizing the compact architecture including the Time-Division(TD) scheme and Tapped-Delay Line(TDL) for channel convolution.Finally, hardware measurement results demonstrate that the properties of emulated channel, i.e.,Power Delay Profile(PDP) and Doppler Power Spectrum Density(DPSD) consist with the simulated ones, which verifies the correctness of hardware implementation. The proposed channel emulator provides an efficient way for optimization, verification, and evaluation of UAV communication systems.
