为改善SnO_2-Fe_2O_3的电化学性能,通过一步水热法合成SnO_2-Fe_2O_3/rGO纳米复合材料,采用XRD、SEM、电化学工作站和蓝电电池测试系统,研究rGO加入量对SnO_2-Fe_2O_3/rGO复合材料的结构和电化学性能的影响.结果表明:rGO的掺入能很好地...为改善SnO_2-Fe_2O_3的电化学性能,通过一步水热法合成SnO_2-Fe_2O_3/rGO纳米复合材料,采用XRD、SEM、电化学工作站和蓝电电池测试系统,研究rGO加入量对SnO_2-Fe_2O_3/rGO复合材料的结构和电化学性能的影响.结果表明:rGO的掺入能很好地提高SnO_2-Fe_2O_3循环稳定性和倍率性能;对于SnO_2-Fe_2O_3/rGO50复合材料,在160 m A/g的电流密度下,100次循环后,放电比容量仍然保持596.9 m Ah/g,库仑效率为98%;即使在1 A/g的电流密度下,依然有366.6 m Ah/g的平均放电比容量.展开更多
A new SnO2-Fe2O3/SWCNTs（single-walled carbon nanotubes） ternary nanocomposite was first synthesized by a facile hydrothermal approach.SnO2 and Fe2O3 nanoparticles（NPs） were homogeneously located on the surface of ...A new SnO2-Fe2O3/SWCNTs（single-walled carbon nanotubes） ternary nanocomposite was first synthesized by a facile hydrothermal approach.SnO2 and Fe2O3 nanoparticles（NPs） were homogeneously located on the surface of SWCNTs,as confirmed by X-ray diffraction（XRD）,transmission electron microscope（TEM） and energy dispersive X-ray spectroscopy（EDX）.Due to the synergistic effect of different components,the as synthesized SnO2-Fe2O3/SWCNTs composite as an anode material for lithium-ion batteries exhibited excellent electrochemical performance with a high capacity of 692 mAh·g-1 which could be maintained after 50 cycles at 200 mA·g-1.Even at a high rate of2000 mA·g-1,the capacity was still remained at 656 mAh·g-1.展开更多
Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscalin...Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscaling for industrial applications.GDC thin films were successfully fabricated through reactive sputtering using a Gd_(0.2)Ce_(0.8)(at%)metallic target,and their application in solid oxide fuel cells,such as buffer layers between yttria-stabilized zirconia(YSZ)/La0.6Sr0.4Co0.2Fe0.8O_(3−δ)and as sublayers in the steel/coating system,was evaluated.First,the direct current(DC)reactive-sputtering behavior of the GdCe metallic target was determined.Then,the GDC films were deposited on NiO-YSZ/YSZ half-cells to investigate the influence of oxygen flow rate on the quality of annealed GDC films.The results demonstrated that reactive sputtering can be used to prepare thin and dense GDC buffer layers without high-temperature sintering.Furthermore,the cells with a sputtered GDC buffer layer showed better electrochemical performance than those with a screen-printed GDC buffer layer.In addition,the insertion of a GDC sublayer between the SUS441 interconnects and the Mn-Co spinel coatings contributed to the reduction of the oxidation rate for SUS441 at operating temperatures,according to the area-specific resistance tests.展开更多
High-purity(99%)carbon nanocoils(CNCs)have been synthesized by using porousα-Fe2O3/SnO2 catalyst.The yield of CNCs reaches 9,098%after a 6 h growth.This value is much higher than the previously reported data,indicati...High-purity(99%)carbon nanocoils(CNCs)have been synthesized by using porousα-Fe2O3/SnO2 catalyst.The yield of CNCs reaches 9,098%after a 6 h growth.This value is much higher than the previously reported data,indicating that this method is promising to synthesize high-purity CNCs on a large scale.It is considered that an appropriate proportion of Fe and Sn,proper particle size distribution,and a loose-porous aggregate structure of the catalyst are the key points to the high-purity growth of CNCs.Benefiting from the high-purity preparation,a CNC Buckypaper was successfully prepared and the electrical,mechanical,and electrochemical properties were investigated comprehensively.Furthermore,as one of the practical applications,the CNC Buckypaper was successfully utilized as an efficient adsorbent for the removal of methylene blue dye from wastewater with an adsorption efficiency of 90.9%.This study provides a facile and economical route for preparing high-purity CNCs,which is suitable for large-quantity production.Furthermore,the fabrication of macroscopic CNC Buckypaper provides promising alternative of adsorbent or other practical applications.展开更多
A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence...A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence was attributed to ^5D3→^7F5, ^5D3→^7F4, ^5D3→^7F3, ^5D4→^7F6, ^5D4→^7F5, ^5D4→^7F4, and ^5D4→^7F3 transitions of Tb^3＋. The relationship between upconversion luminescence intensity and the pump power indicated that a three-photon simultaneous absorption process was dominant in this upconversion luminescence. The intense red, green, and blue upconversion luminescence of Tb^3＋-doped CaO-Al2O3-SiO2 glass may be potentially useful in developing three-dimensional display applications.展开更多
The humidity sensing properties of La^3＋ and K^＋ co-doped Ti0.9Sn0.1O2 thin films were investigated. The humidity sensitive thin films were prepared by sol-gel method on alumina substrates. The sensing behaviors of ...The humidity sensing properties of La^3＋ and K^＋ co-doped Ti0.9Sn0.1O2 thin films were investigated. The humidity sensitive thin films were prepared by sol-gel method on alumina substrates. The sensing behaviors of thin films were inspected at different sintering temperatures by constructing a humidity-impedance measuring system. It was found that the addition of rare earth ion La^3＋ and alkali ion K^＋ was beneficial for improving the humidity sensitive properties of the samples and La0.003K0.5Ti0.9Sn0.1O2 sintered at 500 ℃ for 4 h showed the best humidity sensing properties. The impedance of this thin film decreased from 109 to 104 Ω with excellent linearity in the humidity range of 11%-95%. Narrow hysteresis loop, prominent stability and high sensitivity were obtained. The effects of dopant con-tent and doping mechanism on humidity sensitivity were also discussed in terms of segregation of rare earth ions at grain boundaries and granularity of crystalline and influence of K^＋ on the decrease in the intrinsic resistance of the materials, and increase in the number of wa-ter adsorption sites.展开更多
Nanocomposites of PAn-DBSA/γ-Fe 2O 3 with electrical and ferromagnetic behavior(σ= 2.18×10 -3-5.00×10 -5 S/cm, M s=3.7-16.6 m 2·A/kg, H c=8 805.2-9 133.1 A/m) were prepared by a chemical modification-...Nanocomposites of PAn-DBSA/γ-Fe 2O 3 with electrical and ferromagnetic behavior(σ= 2.18×10 -3-5.00×10 -5 S/cm, M s=3.7-16.6 m 2·A/kg, H c=8 805.2-9 133.1 A/m) were prepared by a chemical modification-redoping method in a neutral medium. The products were characterized by TEM, XRD, UV-Vis, four-probe method, and magnetometer. The results indicate that the electrical and magnetic properties of the nanocomposites strongly depend on γ-Fe 2O 3 content. With the increase of γ-Fe 2O 3 content, the electrical conductivity is decreased and saturation magnetization is increased.展开更多
文摘为改善SnO_2-Fe_2O_3的电化学性能,通过一步水热法合成SnO_2-Fe_2O_3/rGO纳米复合材料,采用XRD、SEM、电化学工作站和蓝电电池测试系统,研究rGO加入量对SnO_2-Fe_2O_3/rGO复合材料的结构和电化学性能的影响.结果表明:rGO的掺入能很好地提高SnO_2-Fe_2O_3循环稳定性和倍率性能;对于SnO_2-Fe_2O_3/rGO50复合材料,在160 m A/g的电流密度下,100次循环后,放电比容量仍然保持596.9 m Ah/g,库仑效率为98%;即使在1 A/g的电流密度下,依然有366.6 m Ah/g的平均放电比容量.
基金supported by the National Key Project on Basic Research(Grant No.2011CB935904)the National Natural Science Foundation of China(Grant No.21171163,91127020)NSF for Distinguished Young Scholars of Fujian Province(Grant No.2013J06006)
文摘A new SnO2-Fe2O3/SWCNTs（single-walled carbon nanotubes） ternary nanocomposite was first synthesized by a facile hydrothermal approach.SnO2 and Fe2O3 nanoparticles（NPs） were homogeneously located on the surface of SWCNTs,as confirmed by X-ray diffraction（XRD）,transmission electron microscope（TEM） and energy dispersive X-ray spectroscopy（EDX）.Due to the synergistic effect of different components,the as synthesized SnO2-Fe2O3/SWCNTs composite as an anode material for lithium-ion batteries exhibited excellent electrochemical performance with a high capacity of 692 mAh·g-1 which could be maintained after 50 cycles at 200 mA·g-1.Even at a high rate of2000 mA·g-1,the capacity was still remained at 656 mAh·g-1.
基金financially supported by the National Key R&D Program of China (No. 2018YFB1502203-1)the Guangdong Basic and Applied Basic Research Foundation (No. 2021B1515120087)the Stable Supporting Fund of Shenzhen, China (No. GXWD20201230155427003-202007 28114835006)
文摘Physical vapor deposition(PVD)can be used to produce high-quality Gd_(2)O_(3)-doped CeO2(GDC)films.Among various PVD methods,reactive sputtering provides unique benefits,such as high deposition rates and easy upscaling for industrial applications.GDC thin films were successfully fabricated through reactive sputtering using a Gd_(0.2)Ce_(0.8)(at%)metallic target,and their application in solid oxide fuel cells,such as buffer layers between yttria-stabilized zirconia(YSZ)/La0.6Sr0.4Co0.2Fe0.8O_(3−δ)and as sublayers in the steel/coating system,was evaluated.First,the direct current(DC)reactive-sputtering behavior of the GdCe metallic target was determined.Then,the GDC films were deposited on NiO-YSZ/YSZ half-cells to investigate the influence of oxygen flow rate on the quality of annealed GDC films.The results demonstrated that reactive sputtering can be used to prepare thin and dense GDC buffer layers without high-temperature sintering.Furthermore,the cells with a sputtered GDC buffer layer showed better electrochemical performance than those with a screen-printed GDC buffer layer.In addition,the insertion of a GDC sublayer between the SUS441 interconnects and the Mn-Co spinel coatings contributed to the reduction of the oxidation rate for SUS441 at operating temperatures,according to the area-specific resistance tests.
基金financially supported by the National Natural Science Foundation of China(Nos.51661145025,51972039,and 51803018)
文摘High-purity(99%)carbon nanocoils(CNCs)have been synthesized by using porousα-Fe2O3/SnO2 catalyst.The yield of CNCs reaches 9,098%after a 6 h growth.This value is much higher than the previously reported data,indicating that this method is promising to synthesize high-purity CNCs on a large scale.It is considered that an appropriate proportion of Fe and Sn,proper particle size distribution,and a loose-porous aggregate structure of the catalyst are the key points to the high-purity growth of CNCs.Benefiting from the high-purity preparation,a CNC Buckypaper was successfully prepared and the electrical,mechanical,and electrochemical properties were investigated comprehensively.Furthermore,as one of the practical applications,the CNC Buckypaper was successfully utilized as an efficient adsorbent for the removal of methylene blue dye from wastewater with an adsorption efficiency of 90.9%.This study provides a facile and economical route for preparing high-purity CNCs,which is suitable for large-quantity production.Furthermore,the fabrication of macroscopic CNC Buckypaper provides promising alternative of adsorbent or other practical applications.
基金supported by the Education Department of Zhejiang Province (20050359)
文摘A near infrared to visible blue, green, and red upconversion luminescence in a Tb^3＋-doped CaO-Al2O3-SiO2 glass was studied, which was excited using 800 nm femtosecond laser irradiation. The upconversion luminescence was attributed to ^5D3→^7F5, ^5D3→^7F4, ^5D3→^7F3, ^5D4→^7F6, ^5D4→^7F5, ^5D4→^7F4, and ^5D4→^7F3 transitions of Tb^3＋. The relationship between upconversion luminescence intensity and the pump power indicated that a three-photon simultaneous absorption process was dominant in this upconversion luminescence. The intense red, green, and blue upconversion luminescence of Tb^3＋-doped CaO-Al2O3-SiO2 glass may be potentially useful in developing three-dimensional display applications.
文摘The humidity sensing properties of La^3＋ and K^＋ co-doped Ti0.9Sn0.1O2 thin films were investigated. The humidity sensitive thin films were prepared by sol-gel method on alumina substrates. The sensing behaviors of thin films were inspected at different sintering temperatures by constructing a humidity-impedance measuring system. It was found that the addition of rare earth ion La^3＋ and alkali ion K^＋ was beneficial for improving the humidity sensitive properties of the samples and La0.003K0.5Ti0.9Sn0.1O2 sintered at 500 ℃ for 4 h showed the best humidity sensing properties. The impedance of this thin film decreased from 109 to 104 Ω with excellent linearity in the humidity range of 11%-95%. Narrow hysteresis loop, prominent stability and high sensitivity were obtained. The effects of dopant con-tent and doping mechanism on humidity sensitivity were also discussed in terms of segregation of rare earth ions at grain boundaries and granularity of crystalline and influence of K^＋ on the decrease in the intrinsic resistance of the materials, and increase in the number of wa-ter adsorption sites.
文摘Nanocomposites of PAn-DBSA/γ-Fe 2O 3 with electrical and ferromagnetic behavior(σ= 2.18×10 -3-5.00×10 -5 S/cm, M s=3.7-16.6 m 2·A/kg, H c=8 805.2-9 133.1 A/m) were prepared by a chemical modification-redoping method in a neutral medium. The products were characterized by TEM, XRD, UV-Vis, four-probe method, and magnetometer. The results indicate that the electrical and magnetic properties of the nanocomposites strongly depend on γ-Fe 2O 3 content. With the increase of γ-Fe 2O 3 content, the electrical conductivity is decreased and saturation magnetization is increased.
