Ferrimagnetic materials exhibiting remanence can be used to achieve unidirectional electromagnetic-field propagation in the form of magnetoplasmons(MPs)in the subwavelength regime.This study investigates the MP proper...Ferrimagnetic materials exhibiting remanence can be used to achieve unidirectional electromagnetic-field propagation in the form of magnetoplasmons(MPs)in the subwavelength regime.This study investigates the MP properties and various guiding modes in a hollow cylindrical waveguide made of materials that exhibit remanence.Pattern analysis and numerical simulations are used to demonstrate that dispersion relationships and electromagnetic-field distribution are strongly affected by the operating frequency and physical dimensions of the structure.In addition,the existence of two different guiding modes is proved,namely regular and surface-wave modes.By adjusting the operating frequency and reducing the diameter of the hollow cylinder,the regular mode can be suppressed so as to only retain the surface-wave mode,which enables unidirectional MP propagation in the cylindrical waveguide.Moreover,the unidirectional surface-wave mode is robust to backscattering due to surface roughness and defects,which makes it very useful for application in field-enhancement devices.展开更多
In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain...In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain unclear.This study reveals the cross-scale thermal runaway triggering and propagation behavior of sodium-ion batteries of“cell-module-cluster”under overcharge conditions,and investigates the effects of key factors,including module spacing,triggering cell location,and heat dissipation condition,on the thermal runaway propagation behavior.Results demonstrate that the thermal runaway propagation in a module containing the overcharged cell follows a sequential triggering mode,while thermal runaway in the downstream module exhibits a simultaneous triggering mode with greater severity.Furthermore,increasing the module spacing or enhancing the heat dissipation capacity can effectively reduce the heat accumulation and prevent the trigger of thermal runaway.On the above basis,the multi-dimensional evaluation strategy is proposed to quantitatively assess the hazard of sodium-ion battery cluster thermal runaway.The findings serve as a foundation for the safe design of sodium-ion batteries in energy storage systems.展开更多
Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−freque...Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−frequency arc discharge experiments encounter limitations in isolating pressure wave characteristics due to persistent gas generation and arc reignition.To circumvent these challenges,an oil-immersed impulse voltage discharge platform was conceived and engineered to investigate pressure wave propagation dynamics.A pressure numerical simulation model and theoretical model of oil−solid interface reflection and refraction were subsequently established to elucidate the pressure propagation mechanism.The experimental and simulation results show that the pressure wave generated by pulsed arc discharge in oil propagates radially in the form of spherical waves.Due to the viscous loss and wave front expansion of transformer oil,the peak pressure decays exponentially with distance,with a decay coefficientβ=1.15.When pressure waves encounter metal obstacles inside transformer oil,there are two propagation paths:direct transmission through and multiple reflections through,and a mode transformation of pressure waves occurs at the oil−solid interface,mainly propagating through obstacles in the form of transverse waves.This work quantitatively delineates the energy pressure wave coupling,propagation dynamics,and attenuation mechanisms,providing critical insights for assessing and mitigating arc fault-induced transformer explosion risks.展开更多
Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagati...Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.展开更多
The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated....The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated.By adjusting the furnace cooling time after solution treatment and the aging temperature,Ti6422 alloy samples were developed with a multi-level lamellar microstructure,in-cluding microscaleαcolonies and α_(p) lamellae,as well as nanoscale α_(s) phases.Extending the furnace cooling time after solution treatment at 920℃ for 1 h from 240 to 540 min,followed by aging at 600℃ for 6 h,increased the α_(p) lamella content,reduced the α_(s) phase content,expanded theαcolonies and α_(p) lamellae size,and improved the impact toughness from 22.7 to 53.8 J/cm^(2).Additionally,under the same solution treatment,raising the aging temperature from 500 to 700℃ resulted in a decrease in the α_(s) phase content and a growth in the thickness of the α_(p) lamella and α_(s) phase.The impact toughness increased significantly with these changes.Samples with high α_(p) lamellae content or large α_(s) phase size exhibited high crack initiation and propagation energies.Impact deformation caused severe kinking of the α_(p) lamellae in crack initiation and propagation areas,leading to a uniform and high-density kernel average misorientation(KAM)distribu-tion,enhancing plastic deformation coordination and uniformity.Moreover,the multidirectional arrangement of coarserαcolonies and α_(p) lamellae continuously deflect the crack propagation direction,inhibiting crack propagation.展开更多
The stability of rock slopes is frequently controlled by the initiation and propagation of inherent dominant cracks.This study systematically investigated these processes in valley slopes by combining fracture-mechani...The stability of rock slopes is frequently controlled by the initiation and propagation of inherent dominant cracks.This study systematically investigated these processes in valley slopes by combining fracture-mechanics analysis with transparent soil model tests.An analytical expression for the stress field at the dominant crack tip was derived from the slope stress distribution by superposing the corresponding stress intensity factors(SIFs).The theoretical predictions were then validated against observations from transparent soil model tests.The influences of slope angle(β),crack inclination angle(α),crack position parameter(b),and crack length parameter(h)on crack initiation and propagation were quantified.The results indicated that:(1)cracks at the slope crest tended to propagate in shear mode,and the shear crack initiation angle(θ_(s))was approximately 8°.Cracks at the slope toe might propagate in either tensile or shear mode.(2)θ_(s) at the slope crest increased withβ,b,and l,and decreased withα.The maximum change inθ_(s) induced by the considered parameters was approximately 30°.(3)The tensile crack initiation angle(θ_(t))at the slop toe decreased withβ,α,and l,while the influence of b was comparatively minor.The maximum change inθ_(t) caused by individual parameters ranged approximately from 25°to 60°.Predicted crack propagation modes and directions showed good agreement with experimental results.These findings provide theoretical guidance for stability assessments of valley slopes controlled by dominant crack propagation.展开更多
Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains chall...Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.展开更多
The approach combining the dynamic caustics method with high-speed photography technology is used to study the interaction between propagating cracks and three kinds of deformity inclusions（ cylinder inclusion, quadr...The approach combining the dynamic caustics method with high-speed photography technology is used to study the interaction between propagating cracks and three kinds of deformity inclusions（ cylinder inclusion, quadruple inclusion and triangular inclusion） under lowvelocity impact loading. By recording the caustic spots of crack tips at different moments during the crack propagation, the variation regulations of dynamic stress intensity factors（ DSIF） and crack growth velocity with respect to time are obtained. The experimental results showthat the resistance effects to crack growth are varied with different shapes of inclusions in specimens, and the quadruple inclusion＇s effect is more apparent. The distortion degree of caustic spots is affected by the shapes of inclusions as well, and the situation is more serious for cylinder and quadruple inclusions. The overall values of DSIFs of triangular inclusion specimen are greater than the others, and the crack growth velocities, characteristic sizes and DSIFs showprocesses of fluctuations because of the disturbance of reflection waves in specimens. The results provide an experimental basis for the analysis of strength and impact-resistance ability in structures with deformity inclusions.展开更多
To address the problem of subdividing inflexible rectangular grid models and their poor definition of velocity interfaces,we propose a complex structure triangular net for a minimum traveltime ray tracing global algor...To address the problem of subdividing inflexible rectangular grid models and their poor definition of velocity interfaces,we propose a complex structure triangular net for a minimum traveltime ray tracing global algorithm.Our procedure is：（1） Subdivide a triangle grid based on the Delaunay triangular subdivision criterion and the relationships of the points,lines,and the surfaces in the subdividing area.（2） Define the topology relationships and related concepts of triangular unit ray tracing.（3） The source point and wave arrival points at any time compose the propagating plane wave and the minimum traveltime and secondary source positions are calculated during the plane wave propagation.We adopt the hyperbolic approximation global algorithm for secondary source retrieving.（4） By minimum traveltime ray tracing,collect the path from receiver to source points with the neighborhood point＇s traveltime and the direction of the secondary source.Numerical simulation examples are given to test the algorithm.The results show that the triangular net ray tracing method demonstrates model subdivision flexibility,precise velocity discontinuity interfaces,and accurate computations.展开更多
In this paper, Ti–Cr–Al–C materials were investigated by self-propagating high-temperature synthesis（SHS） according to the experimental study and numerical simulation results. The highest adiabatic combustion tem...In this paper, Ti–Cr–Al–C materials were investigated by self-propagating high-temperature synthesis（SHS） according to the experimental study and numerical simulation results. The highest adiabatic combustion temperature Tadof 2,467.45 K indicates that the2Ti–0Cr–Al–C is the highest exothermic reaction system in the Ti–Cr–Al–C system. The adiabatic combustion temperature decreases with the increase of the Cr content. And a higher exothermal reaction would result in higher porosity which is induced by the high temperature and pressure of C reducing atmosphere and Al vapor. Combustion characterization of the products shows that the geometrical alternating layers result in the high exothermal reaction and flame-front propagating velocity. The higher the Tadis, the thinner the layer is. To demonstrate the process of the microscopic characterization and show the detailed combustion process closed to the experimental observations, the flame-front propagating velocity and temperature distribution were simulated numerically.展开更多
An elastic-viscoplastic constitutive model was adopted to analyze asymptotically the tip-field of moving crack in linear-hardening materials under plane strain condition. Under the assumption that the artificial visco...An elastic-viscoplastic constitutive model was adopted to analyze asymptotically the tip-field of moving crack in linear-hardening materials under plane strain condition. Under the assumption that the artificial viscosity coefficient was in inverse proportion to power law of the rate of effective plastic strain, it is obtained that stress and strain both possess power law singularity and the singularity exponent is uniquely determined by the power law exponent of the rate of effective plastic strain. Variations of zoning structure according to each material parameter were discussed by means of numerical computation for the tip-field of mode II dynamic propagating crack, which show that the structure of crack tip field is dominated by hardening coefficient rather than viscosity coefficient. The secondary plastic zone can be ignored for weak hardening materials while the secondary plastic zone and the secondary elastic zone both have important influence on crack tip field for strong hardening materials. The dynamic solution approaches to the corresponding quasi-static solution when the crack moving speed goes to zero, and further approaches to the HR （Hui-Riedel） solution when the hardening coefficient is equal to zero.展开更多
On the basis of the extended Huygens-Fresnel principle and the model of the refractive-index structure constant in the atmospheric turbulence proposed by the International Telecommunication Union-Radio Communication S...On the basis of the extended Huygens-Fresnel principle and the model of the refractive-index structure constant in the atmospheric turbulence proposed by the International Telecommunication Union-Radio Communication Sector,the characteristics of the partially coherent Gaussian Schell-model（GSM） beams propagating in slanted atmospheric turbulence are studied.Using the cross-spectral density function（CSDF）,we derive the expressions for the effective beam radius,the spreading angle,and the average intensity.The variance of the angle-of-arrival fluctuation and the wander effect of the GSM beam in the turbulence are calculated numerically.The influences of the coherence degree,the propagation distance,the propagation height,and the waist radius on the propagation characteristics of the partially coherent beams are discussed and compared with those of the fully coherent Gaussian beams.展开更多
The viscosity of material is considered at propagating crack-tip. Under the assumption that the artificial viscosity coefficient is in inverse proportion to power law of the plastic strain rate, an elastic-viscoplasti...The viscosity of material is considered at propagating crack-tip. Under the assumption that the artificial viscosity coefficient is in inverse proportion to power law of the plastic strain rate, an elastic-viscoplastic asymptotic analysis is carried out for moving crack-tip fields in power-hardening materials under plane-strain condition. A continuous solution is obtained containing no discontinuities. The variations of numerical solution are discussed for mode Ⅰ crack according to each parameter. It is shown that stress and strain both possess exponential singularity. The elasticity, plasticity and viscosity of material at crack-tip only can be matched reasonably under linear-hardening condition. And the tip field contains no elastic unloading zone for mode I crack. It approaches the limiting case, crack-tip is under ultra-viscose situation and energy accumulates, crack-tip begins to propagate under different compression situations.展开更多
The effects of preheating temperature and W powder size on the Self propagating High temperature Synthesis(SHS) of Ti W C system were studied. Preheated mixtures and the decrease of W powder size can accelerate the fo...The effects of preheating temperature and W powder size on the Self propagating High temperature Synthesis(SHS) of Ti W C system were studied. Preheated mixtures and the decrease of W powder size can accelerate the formation of (W,Ti)C powders. The uniphase (W,Ti)C (WC∶TiC=5∶5) powders with 0.32% free carbon were synthesized from Ti, W, C powders by SHS. The powder size of the product was 3～5 μm.展开更多
The elastic-viscoplastic model proposed by Bingham was used to analyse the stress and strain surrounding the tip of a propagating crack under antiplane shear.The proper displacement pattern was given;the asymptotic eq...The elastic-viscoplastic model proposed by Bingham was used to analyse the stress and strain surrounding the tip of a propagating crack under antiplane shear.The proper displacement pattern was given;the asymptotic equations were derived and solved numerically.The analysis and calculation show that for smaller viscosity the crack-tip possesses logarthmic singularity,and for larger viscosity it possesses power-law singularity.In critical case,the two kinds of singularity are consistent with each other.The result revealed the important role of viscosity for crack-tip field.展开更多
Based on the theory of coherence, the model of multi-Gaussian Schell-model(MGSM) beams carrying an edge dislocation generated by the MGSM source is introduced. The analytical cross-spectral density of MGSM beams carry...Based on the theory of coherence, the model of multi-Gaussian Schell-model(MGSM) beams carrying an edge dislocation generated by the MGSM source is introduced. The analytical cross-spectral density of MGSM beams carrying an edge dislocation propagating in oceanic turbulence is derived, and used to study the evolution properties of the MGSM beams carrying an edge dislocation. The results indicate that the MGSM beam carrying an edge dislocation propagating in oceanic turbulence will evolve from the profile with two intensity peaks into a flat-topped beam caused by the MGSM source, and the beam will evolve into the Gaussian-like beam due to the influences of oceanic turbulence in the far field.As the propagation distance increases, the MGSM beam carrying an edge dislocation propagating in oceanic turbulence with the larger rate of dissipation of mean-squared temperature(χT) and ratio of temperature to salinity contribution to the refractive index spectrum(?) or the smaller rate of dissipation of kinetic energy per unit mass of fluid(ε) evolves into the flat-topped beam or a Gaussian beam faster.展开更多
AIM: To investigate the presence or absence of high amplitude propagating contractions (HAPC), as well as the other measures of colonic motility, in persons with spinal cord injury (SCI). METHODS: Prolonged colonic am...AIM: To investigate the presence or absence of high amplitude propagating contractions (HAPC), as well as the other measures of colonic motility, in persons with spinal cord injury (SCI). METHODS: Prolonged colonic ambulatory manometric studies were performed on 14 male volunteers: 8 with SCI (mean age, 59 ± 13 years; mean duration of injury, 13 ± 4 years) and 6 healthy able-bodied controls (mean age, 57 ± 10 years). A solid-state manometry catheter was endoscopically clipped to the splenic flexure. Recording was performed for > 24 h after manometric catheter placement. RESULTS: HAPC were absent in individuals with SCI during pre-sleep, sleep, and post-sleep phases. HAPC were significantly increased after awakening in non-SCI controls (0.8 ± 0.2 HAPC/h vs 10.5 ± 2.0 HAPC/h, P < 0.005). The motility index was lower in those with SCI than in controls preand post-sleep (SCI vs non-SCI: Pre-sleep, 2.4 ± 0.4 vs 8.8 ± 1.9, P < 0.01; Post-sleep, 4.3 ± 0.8 vs 16.5 ± 4.5, P < 0.05). However, a sleepinduced depression of colonic motility was observed in both the SCI and non-SCI groups (Pre-sleep vs Sleep, non-SCI: 8.8 ± 1.9 vs 2.1 ± 0.9, P < 0.002; SCI: 2.4 ± 0.4 vs 0.2 ± 0.03, P < 0.001), with the motility index of those with SCI during sleep not significantly different than that of the controls. CONCLUSION: HAPC were not observed in individuals with SCI preor post-sleep. A sleep-induced depression in general colonic motility was evident in SCI and control subjects.展开更多
Asymptotic analysis is conducted for outwardly propagating spherical flames with large activation energy. The spherical flame structure consists of the preheat zone, reaction zone, and equilibrium zone. Analytical sol...Asymptotic analysis is conducted for outwardly propagating spherical flames with large activation energy. The spherical flame structure consists of the preheat zone, reaction zone, and equilibrium zone. Analytical solutions are separately obtained in these three zones and then asymp- totically matched. In the asymptotic analysis, we derive a correlation describing the spherical flame temperature and propagation speed changing with the flame radius. This cor- relation is compared with previous results derived in the limit of infinite value of activation energy. Based on this correla- tion, the properties of spherical flame propagation are inves- tigated and the effects of Lewis number on spherical flame propagation speed and extinction stretch rate are assessed. Moreover, the accuracy and performance of different mod- els used in the spherical flame method are examined. It is found that in order to get accurate laminar flame speed and Markstein length, non-linear models should be used.展开更多
Using the method of separation of variables in the elliptical coordinate system, a recursive formula for the electromagnetic fields in a confocal elliptical waveguide filled with multi-layered homogeneous isotropic me...Using the method of separation of variables in the elliptical coordinate system, a recursive formula for the electromagnetic fields in a confocal elliptical waveguide filled with multi-layered homogeneous isotropic media is derived; then the eigenequation for it is given. When an elliptical waveguide becomes a circular waveguide, the electromagnetic fields and the eigenequation of the circular waveguide can be obtained from the eigenequation of the elliptical waveguide using the asymptotic formulae of Mathieu and modified Mathieu functions for a large radial coordinate in the elliptical coordinate system, and the eigenequation of a circular waveguide filled with multilayered dielectrics can be treated as a special case of an elliptical waveguide. In addition, some numerical examples are presented to analyze the propagating characteristics influenced by the permittivity, permeability of dielectrics filled in the elliptical waveguide, etc. The results show that changing the permittivity or permeability of the dielectrics filled in the waveguide and the major semiaxis value of the i-th layer can change the propagating characteristics of an elliptical waveguide.展开更多
Based on the Monte Carlo approach and conventional error analysis theory,taking the heaviest doubly magic nucleus 208Pb as an example,we first evaluate the propagated uncertainties of universal potential parameters fo...Based on the Monte Carlo approach and conventional error analysis theory,taking the heaviest doubly magic nucleus 208Pb as an example,we first evaluate the propagated uncertainties of universal potential parameters for three typical types of single-particle energy in the phenomenological Woods–Saxon mean field.Accepting the Woods–Saxon modeling with uncorrelated model parameters,we found that the standard deviations of singleparticle energy obtained through the Monte Carlo simulation and the error propagation rules are in good agreement.It seems that the energy uncertainty of the single-particle levels regularly evoluate with certain quantum numbers to a large extent for the given parameter uncertainties.Further,the correlation properties of the single-particle levels within the domain of input parameter uncertainties are statistically analyzed,for example,with the aid of Pearson’s correlation coefficients.It was found that a positive,negative,or unrelated relationship may appear between two selected single-particle levels,which will be extremely helpful for evaluating the theoretical uncertainty related to the single-particle levels(e.g.,K isomer)in nuclear structural calculations.展开更多
文摘Ferrimagnetic materials exhibiting remanence can be used to achieve unidirectional electromagnetic-field propagation in the form of magnetoplasmons(MPs)in the subwavelength regime.This study investigates the MP properties and various guiding modes in a hollow cylindrical waveguide made of materials that exhibit remanence.Pattern analysis and numerical simulations are used to demonstrate that dispersion relationships and electromagnetic-field distribution are strongly affected by the operating frequency and physical dimensions of the structure.In addition,the existence of two different guiding modes is proved,namely regular and surface-wave modes.By adjusting the operating frequency and reducing the diameter of the hollow cylinder,the regular mode can be suppressed so as to only retain the surface-wave mode,which enables unidirectional MP propagation in the cylindrical waveguide.Moreover,the unidirectional surface-wave mode is robust to backscattering due to surface roughness and defects,which makes it very useful for application in field-enhancement devices.
基金supported by the Anhui Quality Infrastructure Standardization Project(Grant No.2024MKSO7)the Science and Technology Project of State Grid(SGAHDK00DJJS2310027)the Anhui Provincial Natural Science Foundation(Grant No.2208085UD03).
文摘In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain unclear.This study reveals the cross-scale thermal runaway triggering and propagation behavior of sodium-ion batteries of“cell-module-cluster”under overcharge conditions,and investigates the effects of key factors,including module spacing,triggering cell location,and heat dissipation condition,on the thermal runaway propagation behavior.Results demonstrate that the thermal runaway propagation in a module containing the overcharged cell follows a sequential triggering mode,while thermal runaway in the downstream module exhibits a simultaneous triggering mode with greater severity.Furthermore,increasing the module spacing or enhancing the heat dissipation capacity can effectively reduce the heat accumulation and prevent the trigger of thermal runaway.On the above basis,the multi-dimensional evaluation strategy is proposed to quantitatively assess the hazard of sodium-ion battery cluster thermal runaway.The findings serve as a foundation for the safe design of sodium-ion batteries in energy storage systems.
基金funded by the Science and Technology Program of State Grid Corporation of China(5500-202356358A-2-1-ZX).
文摘Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−frequency arc discharge experiments encounter limitations in isolating pressure wave characteristics due to persistent gas generation and arc reignition.To circumvent these challenges,an oil-immersed impulse voltage discharge platform was conceived and engineered to investigate pressure wave propagation dynamics.A pressure numerical simulation model and theoretical model of oil−solid interface reflection and refraction were subsequently established to elucidate the pressure propagation mechanism.The experimental and simulation results show that the pressure wave generated by pulsed arc discharge in oil propagates radially in the form of spherical waves.Due to the viscous loss and wave front expansion of transformer oil,the peak pressure decays exponentially with distance,with a decay coefficientβ=1.15.When pressure waves encounter metal obstacles inside transformer oil,there are two propagation paths:direct transmission through and multiple reflections through,and a mode transformation of pressure waves occurs at the oil−solid interface,mainly propagating through obstacles in the form of transverse waves.This work quantitatively delineates the energy pressure wave coupling,propagation dynamics,and attenuation mechanisms,providing critical insights for assessing and mitigating arc fault-induced transformer explosion risks.
文摘Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.
基金supported by the National Natural Science Foundation of China(No.52090041).
文摘The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated.By adjusting the furnace cooling time after solution treatment and the aging temperature,Ti6422 alloy samples were developed with a multi-level lamellar microstructure,in-cluding microscaleαcolonies and α_(p) lamellae,as well as nanoscale α_(s) phases.Extending the furnace cooling time after solution treatment at 920℃ for 1 h from 240 to 540 min,followed by aging at 600℃ for 6 h,increased the α_(p) lamella content,reduced the α_(s) phase content,expanded theαcolonies and α_(p) lamellae size,and improved the impact toughness from 22.7 to 53.8 J/cm^(2).Additionally,under the same solution treatment,raising the aging temperature from 500 to 700℃ resulted in a decrease in the α_(s) phase content and a growth in the thickness of the α_(p) lamella and α_(s) phase.The impact toughness increased significantly with these changes.Samples with high α_(p) lamellae content or large α_(s) phase size exhibited high crack initiation and propagation energies.Impact deformation caused severe kinking of the α_(p) lamellae in crack initiation and propagation areas,leading to a uniform and high-density kernel average misorientation(KAM)distribu-tion,enhancing plastic deformation coordination and uniformity.Moreover,the multidirectional arrangement of coarserαcolonies and α_(p) lamellae continuously deflect the crack propagation direction,inhibiting crack propagation.
基金financially supported by the National Nature Science Foundation of China(Nos.52379110 and 42207222)the Key Technologies for Accurate Diagnosis and Intelligent Prevention and Control of Slope Hazards in Open Pit Mines,181 Major R&D projects of Metallurgical Corporation of China Ltd。
文摘The stability of rock slopes is frequently controlled by the initiation and propagation of inherent dominant cracks.This study systematically investigated these processes in valley slopes by combining fracture-mechanics analysis with transparent soil model tests.An analytical expression for the stress field at the dominant crack tip was derived from the slope stress distribution by superposing the corresponding stress intensity factors(SIFs).The theoretical predictions were then validated against observations from transparent soil model tests.The influences of slope angle(β),crack inclination angle(α),crack position parameter(b),and crack length parameter(h)on crack initiation and propagation were quantified.The results indicated that:(1)cracks at the slope crest tended to propagate in shear mode,and the shear crack initiation angle(θ_(s))was approximately 8°.Cracks at the slope toe might propagate in either tensile or shear mode.(2)θ_(s) at the slope crest increased withβ,b,and l,and decreased withα.The maximum change inθ_(s) induced by the considered parameters was approximately 30°.(3)The tensile crack initiation angle(θ_(t))at the slop toe decreased withβ,α,and l,while the influence of b was comparatively minor.The maximum change inθ_(t) caused by individual parameters ranged approximately from 25°to 60°.Predicted crack propagation modes and directions showed good agreement with experimental results.These findings provide theoretical guidance for stability assessments of valley slopes controlled by dominant crack propagation.
基金supported by the National Key Research and Development Program(2021YFB150740401)National Natural Science Foundation of China(42202336)the CAS Pioneer Hundred Talents Program in China(Y826031C01)。
文摘Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.
基金The National Natural Science Foundation of China(No.51374210,51134025)the 111 Project(No.B14006)
文摘The approach combining the dynamic caustics method with high-speed photography technology is used to study the interaction between propagating cracks and three kinds of deformity inclusions（ cylinder inclusion, quadruple inclusion and triangular inclusion） under lowvelocity impact loading. By recording the caustic spots of crack tips at different moments during the crack propagation, the variation regulations of dynamic stress intensity factors（ DSIF） and crack growth velocity with respect to time are obtained. The experimental results showthat the resistance effects to crack growth are varied with different shapes of inclusions in specimens, and the quadruple inclusion＇s effect is more apparent. The distortion degree of caustic spots is affected by the shapes of inclusions as well, and the situation is more serious for cylinder and quadruple inclusions. The overall values of DSIFs of triangular inclusion specimen are greater than the others, and the crack growth velocities, characteristic sizes and DSIFs showprocesses of fluctuations because of the disturbance of reflection waves in specimens. The results provide an experimental basis for the analysis of strength and impact-resistance ability in structures with deformity inclusions.
基金the National Natural Science Foundation of China(Grant Nos.50974081,50774051, 51034003)the Foundation for the Author of National Excellent Doctoral Dissertation of PR China(Grant No.200958)+1 种基金the Program for Changjiang Scholars and Innovative Research Team in University(Grant No.IRT0843)the Open Research Fund Program of the State Key Laboratory of Coal Resources and Safe Mining(China University of Mining and Technology, Beijing)(No.2007-07)
文摘To address the problem of subdividing inflexible rectangular grid models and their poor definition of velocity interfaces,we propose a complex structure triangular net for a minimum traveltime ray tracing global algorithm.Our procedure is：（1） Subdivide a triangle grid based on the Delaunay triangular subdivision criterion and the relationships of the points,lines,and the surfaces in the subdividing area.（2） Define the topology relationships and related concepts of triangular unit ray tracing.（3） The source point and wave arrival points at any time compose the propagating plane wave and the minimum traveltime and secondary source positions are calculated during the plane wave propagation.We adopt the hyperbolic approximation global algorithm for secondary source retrieving.（4） By minimum traveltime ray tracing,collect the path from receiver to source points with the neighborhood point＇s traveltime and the direction of the secondary source.Numerical simulation examples are given to test the algorithm.The results show that the triangular net ray tracing method demonstrates model subdivision flexibility,precise velocity discontinuity interfaces,and accurate computations.
基金financially supported by the National Natural Science Foundation of China (Nos. 11302068 and 51172057)China Postdoctoral Science Foundation (No. 2013M541261)
文摘In this paper, Ti–Cr–Al–C materials were investigated by self-propagating high-temperature synthesis（SHS） according to the experimental study and numerical simulation results. The highest adiabatic combustion temperature Tadof 2,467.45 K indicates that the2Ti–0Cr–Al–C is the highest exothermic reaction system in the Ti–Cr–Al–C system. The adiabatic combustion temperature decreases with the increase of the Cr content. And a higher exothermal reaction would result in higher porosity which is induced by the high temperature and pressure of C reducing atmosphere and Al vapor. Combustion characterization of the products shows that the geometrical alternating layers result in the high exothermal reaction and flame-front propagating velocity. The higher the Tadis, the thinner the layer is. To demonstrate the process of the microscopic characterization and show the detailed combustion process closed to the experimental observations, the flame-front propagating velocity and temperature distribution were simulated numerically.
基金Project supported by the Doctor Science Research Startup Foundation of Harbin Institute of Technology (No.01502485)
文摘An elastic-viscoplastic constitutive model was adopted to analyze asymptotically the tip-field of moving crack in linear-hardening materials under plane strain condition. Under the assumption that the artificial viscosity coefficient was in inverse proportion to power law of the rate of effective plastic strain, it is obtained that stress and strain both possess power law singularity and the singularity exponent is uniquely determined by the power law exponent of the rate of effective plastic strain. Variations of zoning structure according to each material parameter were discussed by means of numerical computation for the tip-field of mode II dynamic propagating crack, which show that the structure of crack tip field is dominated by hardening coefficient rather than viscosity coefficient. The secondary plastic zone can be ignored for weak hardening materials while the secondary plastic zone and the secondary elastic zone both have important influence on crack tip field for strong hardening materials. The dynamic solution approaches to the corresponding quasi-static solution when the crack moving speed goes to zero, and further approaches to the HR （Hui-Riedel） solution when the hardening coefficient is equal to zero.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61172031)
文摘On the basis of the extended Huygens-Fresnel principle and the model of the refractive-index structure constant in the atmospheric turbulence proposed by the International Telecommunication Union-Radio Communication Sector,the characteristics of the partially coherent Gaussian Schell-model（GSM） beams propagating in slanted atmospheric turbulence are studied.Using the cross-spectral density function（CSDF）,we derive the expressions for the effective beam radius,the spreading angle,and the average intensity.The variance of the angle-of-arrival fluctuation and the wander effect of the GSM beam in the turbulence are calculated numerically.The influences of the coherence degree,the propagation distance,the propagation height,and the waist radius on the propagation characteristics of the partially coherent beams are discussed and compared with those of the fully coherent Gaussian beams.
基金Project supported by the Ph. D. Programs Foundation of Ministry of Education of China(No.20060217010)
文摘The viscosity of material is considered at propagating crack-tip. Under the assumption that the artificial viscosity coefficient is in inverse proportion to power law of the plastic strain rate, an elastic-viscoplastic asymptotic analysis is carried out for moving crack-tip fields in power-hardening materials under plane-strain condition. A continuous solution is obtained containing no discontinuities. The variations of numerical solution are discussed for mode Ⅰ crack according to each parameter. It is shown that stress and strain both possess exponential singularity. The elasticity, plasticity and viscosity of material at crack-tip only can be matched reasonably under linear-hardening condition. And the tip field contains no elastic unloading zone for mode I crack. It approaches the limiting case, crack-tip is under ultra-viscose situation and energy accumulates, crack-tip begins to propagate under different compression situations.
文摘The effects of preheating temperature and W powder size on the Self propagating High temperature Synthesis(SHS) of Ti W C system were studied. Preheated mixtures and the decrease of W powder size can accelerate the formation of (W,Ti)C powders. The uniphase (W,Ti)C (WC∶TiC=5∶5) powders with 0.32% free carbon were synthesized from Ti, W, C powders by SHS. The powder size of the product was 3～5 μm.
文摘The elastic-viscoplastic model proposed by Bingham was used to analyse the stress and strain surrounding the tip of a propagating crack under antiplane shear.The proper displacement pattern was given;the asymptotic equations were derived and solved numerically.The analysis and calculation show that for smaller viscosity the crack-tip possesses logarthmic singularity,and for larger viscosity it possesses power-law singularity.In critical case,the two kinds of singularity are consistent with each other.The result revealed the important role of viscosity for crack-tip field.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11604038,11875096,and 11404048)the Fundamental Research Funds for the Central Universities,China(Grant Nos.3132019182 and 3132019184)
文摘Based on the theory of coherence, the model of multi-Gaussian Schell-model(MGSM) beams carrying an edge dislocation generated by the MGSM source is introduced. The analytical cross-spectral density of MGSM beams carrying an edge dislocation propagating in oceanic turbulence is derived, and used to study the evolution properties of the MGSM beams carrying an edge dislocation. The results indicate that the MGSM beam carrying an edge dislocation propagating in oceanic turbulence will evolve from the profile with two intensity peaks into a flat-topped beam caused by the MGSM source, and the beam will evolve into the Gaussian-like beam due to the influences of oceanic turbulence in the far field.As the propagation distance increases, the MGSM beam carrying an edge dislocation propagating in oceanic turbulence with the larger rate of dissipation of mean-squared temperature(χT) and ratio of temperature to salinity contribution to the refractive index spectrum(?) or the smaller rate of dissipation of kinetic energy per unit mass of fluid(ε) evolves into the flat-topped beam or a Gaussian beam faster.
基金Supported by The Department of Veterans Affairs Rehabilitation Research and Development Service Center of Excellencefor the Medical Consequences of Spinal Cord Injury (B4162C)
文摘AIM: To investigate the presence or absence of high amplitude propagating contractions (HAPC), as well as the other measures of colonic motility, in persons with spinal cord injury (SCI). METHODS: Prolonged colonic ambulatory manometric studies were performed on 14 male volunteers: 8 with SCI (mean age, 59 ± 13 years; mean duration of injury, 13 ± 4 years) and 6 healthy able-bodied controls (mean age, 57 ± 10 years). A solid-state manometry catheter was endoscopically clipped to the splenic flexure. Recording was performed for > 24 h after manometric catheter placement. RESULTS: HAPC were absent in individuals with SCI during pre-sleep, sleep, and post-sleep phases. HAPC were significantly increased after awakening in non-SCI controls (0.8 ± 0.2 HAPC/h vs 10.5 ± 2.0 HAPC/h, P < 0.005). The motility index was lower in those with SCI than in controls preand post-sleep (SCI vs non-SCI: Pre-sleep, 2.4 ± 0.4 vs 8.8 ± 1.9, P < 0.01; Post-sleep, 4.3 ± 0.8 vs 16.5 ± 4.5, P < 0.05). However, a sleepinduced depression of colonic motility was observed in both the SCI and non-SCI groups (Pre-sleep vs Sleep, non-SCI: 8.8 ± 1.9 vs 2.1 ± 0.9, P < 0.002; SCI: 2.4 ± 0.4 vs 0.2 ± 0.03, P < 0.001), with the motility index of those with SCI during sleep not significantly different than that of the controls. CONCLUSION: HAPC were not observed in individuals with SCI preor post-sleep. A sleep-induced depression in general colonic motility was evident in SCI and control subjects.
基金supported by the National Natural Science Foundation of China (50976003,51136005)Doctoral Fund of Ministry of Education of China (20100001120003)
文摘Asymptotic analysis is conducted for outwardly propagating spherical flames with large activation energy. The spherical flame structure consists of the preheat zone, reaction zone, and equilibrium zone. Analytical solutions are separately obtained in these three zones and then asymp- totically matched. In the asymptotic analysis, we derive a correlation describing the spherical flame temperature and propagation speed changing with the flame radius. This cor- relation is compared with previous results derived in the limit of infinite value of activation energy. Based on this correla- tion, the properties of spherical flame propagation are inves- tigated and the effects of Lewis number on spherical flame propagation speed and extinction stretch rate are assessed. Moreover, the accuracy and performance of different mod- els used in the spherical flame method are examined. It is found that in order to get accurate laminar flame speed and Markstein length, non-linear models should be used.
文摘Using the method of separation of variables in the elliptical coordinate system, a recursive formula for the electromagnetic fields in a confocal elliptical waveguide filled with multi-layered homogeneous isotropic media is derived; then the eigenequation for it is given. When an elliptical waveguide becomes a circular waveguide, the electromagnetic fields and the eigenequation of the circular waveguide can be obtained from the eigenequation of the elliptical waveguide using the asymptotic formulae of Mathieu and modified Mathieu functions for a large radial coordinate in the elliptical coordinate system, and the eigenequation of a circular waveguide filled with multilayered dielectrics can be treated as a special case of an elliptical waveguide. In addition, some numerical examples are presented to analyze the propagating characteristics influenced by the permittivity, permeability of dielectrics filled in the elliptical waveguide, etc. The results show that changing the permittivity or permeability of the dielectrics filled in the waveguide and the major semiaxis value of the i-th layer can change the propagating characteristics of an elliptical waveguide.
基金the National Natural Science Foundation of China(No.11975209)the Physics Research and Development Program of Zhengzhou University(No.32410017)the Project of Youth Backbone Teachers of Colleges and Universities of Henan Province(No.2017GGJS008)。
文摘Based on the Monte Carlo approach and conventional error analysis theory,taking the heaviest doubly magic nucleus 208Pb as an example,we first evaluate the propagated uncertainties of universal potential parameters for three typical types of single-particle energy in the phenomenological Woods–Saxon mean field.Accepting the Woods–Saxon modeling with uncorrelated model parameters,we found that the standard deviations of singleparticle energy obtained through the Monte Carlo simulation and the error propagation rules are in good agreement.It seems that the energy uncertainty of the single-particle levels regularly evoluate with certain quantum numbers to a large extent for the given parameter uncertainties.Further,the correlation properties of the single-particle levels within the domain of input parameter uncertainties are statistically analyzed,for example,with the aid of Pearson’s correlation coefficients.It was found that a positive,negative,or unrelated relationship may appear between two selected single-particle levels,which will be extremely helpful for evaluating the theoretical uncertainty related to the single-particle levels(e.g.,K isomer)in nuclear structural calculations.
