The aging process of atmospheric aerosols usually leads to a mixture of inorganic salts and organic compounds of anthropogenic origin.In organic compounds,polyhydroxy organic acids are important components,however,the...The aging process of atmospheric aerosols usually leads to a mixture of inorganic salts and organic compounds of anthropogenic origin.In organic compounds,polyhydroxy organic acids are important components,however,the study on composition and hygroscopic properties of the mixture containing inorganics and polyhydroxy organic acids is scanty.In this study,gluconic acid,the proxy of polyhydroxy organic acids,is mixed with the representative nitrate(Mg(NO_(3))_(2),Ca(NO_(3))_(2))to form aerosols.ATR-FTIR and optical microscopy are employed to study the component changes and hygroscopicity as a function of relative humidity.As relative humidity fluctuates,the FTIR-ATR spectra display that the internal mixed gluconic acid(CH_(2)(CH)_(4)(OH)_(5)COOH)and nitrate can react to release acidic gases,forming relevant gluconate and further affecting the hygroscopicity.The specific presentation is particles cannot be recovered to their original size after the dehydration-hydration process and there will be some disparities in GF for mixed particles.For the gluconic acid-Ca(NO_(3))_(2)/Mg(NO_(3))_(2)mixtures with molar ratios of 1:1,higher degree of reaction resulting in the production of large amounts of gluconate should be responsible to the lower hygroscopicity compared to ZSR model.For 1:2 gluconic acid-nitrate mixed systems(with higher nitrate content),the hygroscopicity of mixtures are higher than the ZSR prediction.A possible reason could be‘salt-promoting effect’on the organic fractions of the surplus inorganic salt in the mixture.These data can improve the chemical composition list evaluation,in turn hygroscopic properties and phase state of atmospheric aerosol,and then the climate effect.展开更多
The uncertainty in emission estimation is strongly associated with the variation in emission factor （EF）,which could be influenced by a variety of factors such as fuel properties,stove type,fire management and even ...The uncertainty in emission estimation is strongly associated with the variation in emission factor （EF）,which could be influenced by a variety of factors such as fuel properties,stove type,fire management and even methods used in measurements.The impacts of these factors are complicated and often interact with each other.Controlled burning experiments were conducted to investigate the influences of fuel mass load,air supply and burning rate on the emissions and size distributions of carbonaceous particulate matter （PM） from indoor corn straw burning in a cooking stove.The results showed that the EFs of PM （EFPM）,organic carbon （EFOC） and elemental carbon （EFEC） were independent of the fuel mass load.The differences among them under different burning rates or air supply amounts were also found to be insignificant （p 〉 0.05） in the tested circumstances.PM from the indoor corn straw burning was dominated by fine PM with diameter less than 2.1 μm,contributing 86.4%±3.9% of the total.The size distribution of PM was influenced by the burning rate and air supply conditions.On average,EF PM,EF OC and EF EC for corn straw burned in a residential cooking stove were （3.84±1.02）,（0.846±0.895） and （0.391±0.350） g/kg,respectively.EF PM,EF OC and EF EC were found to be positively correlated with each other （p 〈 0.05）,but they were not significantly correlated with the EF of co-emitted CO,suggesting that special attention should be paid to the use of CO as a surrogate for other incomplete combustion pollutants.展开更多
The effect of controlling strata movement in solid filling mining depends on the filling rate of the goal. However, the mechanical property of the overburden in the backfill stope and the designed size of the backfill...The effect of controlling strata movement in solid filling mining depends on the filling rate of the goal. However, the mechanical property of the overburden in the backfill stope and the designed size of the backfill mining workface should also be considered. In this study, we established a main roof strata model with loads in accordance with the theory of key strata to investigate the stability of the overburden in solid dense filling mining. We analyzed the stress distribution law of the main roof strata based on elastic thin plate theory. The results show that the position of the long side midpoint of the main roof strata failed more easily because of tensile yield, indicating that this position is the area where failure is likely to occur more easily. We also deduced the stability mechanics criterion of the main roof strata based on tensile yield criterion. The factors affecting the stability of the overburden in solid dense filling mining were also analyzed, including the thickness and elasticity modulus of the main roof strata, overlying strata loads, advanced distance and length of workface, and elastic foundation coefficient of backfill body. The research achievements can provide an important theoretical basis for determining the designed size of the solid dense filling mining workface.展开更多
Two new size factors of cross-section hollow coefficient and bending degree are introduced to reveal the size effect of bending forming of bimetallic composite tube.Hollow coefficient and bending degree can limit the ...Two new size factors of cross-section hollow coefficient and bending degree are introduced to reveal the size effect of bending forming of bimetallic composite tube.Hollow coefficient and bending degree can limit the commonly used bent tube to the size description range of(0,2.00).The evolution laws of the cross-section distortion forms in the hollow coefficient-bending degree interval are revealed as well as the action of the mandrel-cores on the size effect.Results show the mandrel-cores filling can expand the forming limit of the bent tube,but also bring two other forming defects of wrinkle and rupture.The identification factor(hollow coefficient multiply bending degree)provides a method for querying the cross-section distortion forms of all composite bending tubes.In the identification factor interval(0,1.00),the distribution area of bending forming defects of the composite tube is continuous.The thin-walled composite bending tube collapses when identification factor in(0,0.39),wrinkles when identification factor in[0.39,0.50),and ruptures when identification factor in[0.50,1.00).The mathematical model of size effect is derived,by which the average cross-section distortion rate is found to distribute like a radial leaf in the hollow coefficient-bending degree qualified forming space.The best forming zone is hollow coefficient 0.46-0.68,and bending degree 0.25-0.47.展开更多
Cu bicrystals of different sizes with a sole twin boundary（TB） inclined at 45？with respect to the loading direction were deformed under unidirectional and cyclic loading, respectively. It is found that the slip ba...Cu bicrystals of different sizes with a sole twin boundary（TB） inclined at 45？with respect to the loading direction were deformed under unidirectional and cyclic loading, respectively. It is found that the slip bands（SBs） parallel to the TB can be activated near the TB at all scales without obeying the Schmid＇s law.It is concerned with the local stress enhancement in the macroscale while it is more closely related to the scarce dislocation sources in the microscale. Moreover, a wedge-shaped zone formed near the TB in the microscale ascribed to the limited specimen size.展开更多
Objective Previous studies showed that hypoxia preconditioning could protect cardiac function against subsequent myo-cardial infarction injury. However, the effect of hypoxia on left ventricular after myocardial infar...Objective Previous studies showed that hypoxia preconditioning could protect cardiac function against subsequent myo-cardial infarction injury. However, the effect of hypoxia on left ventricular after myocardial infarction is still unclear. This study therefore aims to investigate the effects of hypoxia training on left ventricular remodeling in rabbits post myocardial infarction. Methods Adult male rabbits were randomly divided into three groups： group SO （sham operated）, group MI （myocardial infarc-tion only） and group MI-HT （myocardial infarction plus hypoxia training）. Myocardial infarction was induced by left ventricular branch ligation. Hypoxia training was performed in a hypobaric chamber （having equivalent condition at an altitude of 4000 m, FiO214.9%） for 1 h/day, 5 days/week for four weeks. At the endpoints, vascular endothelial growth factor （VEGF） in the plasma was measured. Infarct size and capillary density were detected by histology. Left ventricular remodeling and function were as-sessed by echocardiography.Results After the 4-week experiment, compared with the group SO, plasma VEGF levels in groups MI （130.27 ± 18.58 pg/mL,P〈 0.01） and MI-HT （181.93 ± 20.29 pg/mL,P〈 0.01） were significantly increased. Infarct size in Group MI-HT （29.67% ± 7.73%） was deceased remarkably, while its capillary density （816.0 ± 122.2/mm2） was significantly increased. For both groups MI and MI-HT, left ventricular end-diastolic and end-systolic dimensions were increased whereas left ventricular ejection fraction was decreased. However, compared with group MI, group MI-HT diminished left ventricular end-diastolic （15.86 ± 1.09 mm,P〈 0.05） and end-systolic dimensions （12.10 ± 1.20 mm,P〈 0.01） significantly and im-proved left ventricular ejection fraction （54.39 ± 12.74 mm,P〈 0.05）.ConclusionHypoxia training may improve left ven-tricular function and reduce remodeling via angiogenesis in rabbits with MI.展开更多
Hydrodynamic lubrications between two plane plates with an intersection angle θ have been investigated us- ing the boundary slippage theory, and relations are obtained between dimensionless pressures and coordinate x...Hydrodynamic lubrications between two plane plates with an intersection angle θ have been investigated us- ing the boundary slippage theory, and relations are obtained between dimensionless pressures and coordinate x, between bearing capacity, friction force, friction coefficient and di- mensionless slipping size factor. The results show that bear- ing capacity of two plane plates without boundary slippage significantly increases with increasing intersection angle θ when 0 〈 θ 〈 1°, whereas decreases with increasing in- tersection angle 0 when θ 〉 1°. The results also show that negative pressure occurs in fluid entrance region and bearing capacity decreases, and friction force and friction coefficient increase with the increase of dimensionless slipping size fac- tor.展开更多
Under the as-welded condition the fatigue crack initiation period was considered nonexistent and Linear Elastic Fracture Mechanics（LEFM） was used to calculate fatigue strength for a range of weld geometries. Fractur...Under the as-welded condition the fatigue crack initiation period was considered nonexistent and Linear Elastic Fracture Mechanics（LEFM） was used to calculate fatigue strength for a range of weld geometries. Fracture mechanics assessment of welded joints requires accurate solutions for stress intensity factor（SIF）. However, the solutions for the SIF of complex welded joints are dificult to determine due to the complicated correction factors. Three methods for SIF prediction are discussed on illet welded specimens containing continuous or semi-elliptical surface cracks, including the traditional correction method Mk, the approximate correction method Kt, and the suggested additional crack size method（ac＋ae）.The new additional crack parameter ae is used to replace the stress concentration effect of weld proile Mk, which simpliies the calculation process. Experimental results are collected to support fatigue strength assessment of the additional crack size method.展开更多
In this paper a model of transversal filter is presented to study the adaptive match of the time variant channel. The least mean square error filtering method is used to obtain the weighting coefficients of the filter...In this paper a model of transversal filter is presented to study the adaptive match of the time variant channel. The least mean square error filtering method is used to obtain the weighting coefficients of the filter. With the purpose of speeding up the convergence of the iteration equation of adaptive filtering, an adaptive factor of the iteration step size μa is derived in this paper. The result of computer simulation shows that in the case of using adaptive μa, the convergence speed of the iteration equation is increased 2 times approximately in comparison with constant μ1. The study suggests that the adaptive filter with adaptive μa have the performance to follow the change of time-variant characteristics of the channel.展开更多
To balance the convergence rate and steadystate error of blind source separation(BSS) algorithms, an efficient equivariant adaptive separation via independence(Efficient EASI) algorithm is proposed based on separating...To balance the convergence rate and steadystate error of blind source separation(BSS) algorithms, an efficient equivariant adaptive separation via independence(Efficient EASI) algorithm is proposed based on separating indicator, which was derived from the convergence condition of EASI, and can be used to evaluate the separation degree of separated signals. Furthermore, a nonlinear monotone increasing function between suitable step sizes and separating indicator is constructed to adaptively adjust step sizes, and forgetting factor is employed to weaken effects of data at the initial stage. Numerical case studies and experimental studies on a test bed with shell structures are provided to validate the efficiency improvement of the proposed method. This study can benefit for vibration & acoustic monitoring and control, and machinery condition monitoring and fault diagnosis.展开更多
基金supported by the National Natural Science Foundation of China(Nos.91644101 and 42127806)。
文摘The aging process of atmospheric aerosols usually leads to a mixture of inorganic salts and organic compounds of anthropogenic origin.In organic compounds,polyhydroxy organic acids are important components,however,the study on composition and hygroscopic properties of the mixture containing inorganics and polyhydroxy organic acids is scanty.In this study,gluconic acid,the proxy of polyhydroxy organic acids,is mixed with the representative nitrate(Mg(NO_(3))_(2),Ca(NO_(3))_(2))to form aerosols.ATR-FTIR and optical microscopy are employed to study the component changes and hygroscopicity as a function of relative humidity.As relative humidity fluctuates,the FTIR-ATR spectra display that the internal mixed gluconic acid(CH_(2)(CH)_(4)(OH)_(5)COOH)and nitrate can react to release acidic gases,forming relevant gluconate and further affecting the hygroscopicity.The specific presentation is particles cannot be recovered to their original size after the dehydration-hydration process and there will be some disparities in GF for mixed particles.For the gluconic acid-Ca(NO_(3))_(2)/Mg(NO_(3))_(2)mixtures with molar ratios of 1:1,higher degree of reaction resulting in the production of large amounts of gluconate should be responsible to the lower hygroscopicity compared to ZSR model.For 1:2 gluconic acid-nitrate mixed systems(with higher nitrate content),the hygroscopicity of mixtures are higher than the ZSR prediction.A possible reason could be‘salt-promoting effect’on the organic fractions of the surplus inorganic salt in the mixture.These data can improve the chemical composition list evaluation,in turn hygroscopic properties and phase state of atmospheric aerosol,and then the climate effect.
基金supported by the National Natural Science Foundation of China(No.41130754,41001343,41001343)the Beijing Municipal Government(No.YB20101000101)+1 种基金the Ministry of Environmental Protection(No.201209018)NIEHS(No.P42ES016465)
文摘The uncertainty in emission estimation is strongly associated with the variation in emission factor （EF）,which could be influenced by a variety of factors such as fuel properties,stove type,fire management and even methods used in measurements.The impacts of these factors are complicated and often interact with each other.Controlled burning experiments were conducted to investigate the influences of fuel mass load,air supply and burning rate on the emissions and size distributions of carbonaceous particulate matter （PM） from indoor corn straw burning in a cooking stove.The results showed that the EFs of PM （EFPM）,organic carbon （EFOC） and elemental carbon （EFEC） were independent of the fuel mass load.The differences among them under different burning rates or air supply amounts were also found to be insignificant （p 〉 0.05） in the tested circumstances.PM from the indoor corn straw burning was dominated by fine PM with diameter less than 2.1 μm,contributing 86.4%±3.9% of the total.The size distribution of PM was influenced by the burning rate and air supply conditions.On average,EF PM,EF OC and EF EC for corn straw burned in a residential cooking stove were （3.84±1.02）,（0.846±0.895） and （0.391±0.350） g/kg,respectively.EF PM,EF OC and EF EC were found to be positively correlated with each other （p 〈 0.05）,but they were not significantly correlated with the EF of co-emitted CO,suggesting that special attention should be paid to the use of CO as a surrogate for other incomplete combustion pollutants.
基金Financial support for this work, provided by the National Natural Science Foundation of China (No.51404013)the Natural Science Foundation of Anhui Province (Nos.1508085ME77 and 1508085QE89)the Open Projects of State Key Laboratory for Geomechanics & Deep Underground Engineering at the China University of Mining and Technology (No.SKLGDUEK1212)
文摘The effect of controlling strata movement in solid filling mining depends on the filling rate of the goal. However, the mechanical property of the overburden in the backfill stope and the designed size of the backfill mining workface should also be considered. In this study, we established a main roof strata model with loads in accordance with the theory of key strata to investigate the stability of the overburden in solid dense filling mining. We analyzed the stress distribution law of the main roof strata based on elastic thin plate theory. The results show that the position of the long side midpoint of the main roof strata failed more easily because of tensile yield, indicating that this position is the area where failure is likely to occur more easily. We also deduced the stability mechanics criterion of the main roof strata based on tensile yield criterion. The factors affecting the stability of the overburden in solid dense filling mining were also analyzed, including the thickness and elasticity modulus of the main roof strata, overlying strata loads, advanced distance and length of workface, and elastic foundation coefficient of backfill body. The research achievements can provide an important theoretical basis for determining the designed size of the solid dense filling mining workface.
基金co-supported by the National Natural Science Foundation of China(Nos.51601070 and 51875263)the Open Project of Guangdong Key Laboratory of Precision Equipment and Manufacturing Technology,China(No.PEMT202102)the Natural Science Foundation of Jiangsu Province,China(No.BK20181447)。
文摘Two new size factors of cross-section hollow coefficient and bending degree are introduced to reveal the size effect of bending forming of bimetallic composite tube.Hollow coefficient and bending degree can limit the commonly used bent tube to the size description range of(0,2.00).The evolution laws of the cross-section distortion forms in the hollow coefficient-bending degree interval are revealed as well as the action of the mandrel-cores on the size effect.Results show the mandrel-cores filling can expand the forming limit of the bent tube,but also bring two other forming defects of wrinkle and rupture.The identification factor(hollow coefficient multiply bending degree)provides a method for querying the cross-section distortion forms of all composite bending tubes.In the identification factor interval(0,1.00),the distribution area of bending forming defects of the composite tube is continuous.The thin-walled composite bending tube collapses when identification factor in(0,0.39),wrinkles when identification factor in[0.39,0.50),and ruptures when identification factor in[0.50,1.00).The mathematical model of size effect is derived,by which the average cross-section distortion rate is found to distribute like a radial leaf in the hollow coefficient-bending degree qualified forming space.The best forming zone is hollow coefficient 0.46-0.68,and bending degree 0.25-0.47.
基金supported by the National Natural Science Foundation of China (NSFC) under grant Nos. 51171194, 51501197, 51571198, 51471170the IMR SYNL-T.S. Kê Research Fellowship
文摘Cu bicrystals of different sizes with a sole twin boundary（TB） inclined at 45？with respect to the loading direction were deformed under unidirectional and cyclic loading, respectively. It is found that the slip bands（SBs） parallel to the TB can be activated near the TB at all scales without obeying the Schmid＇s law.It is concerned with the local stress enhancement in the macroscale while it is more closely related to the scarce dislocation sources in the microscale. Moreover, a wedge-shaped zone formed near the TB in the microscale ascribed to the limited specimen size.
基金We are grateful to the support of Dr. Lei Yuan and Shao-Shao Zhao for their technical assistance. This work was supported in part by China Postdoctoral Science Foundation Province, China
文摘Objective Previous studies showed that hypoxia preconditioning could protect cardiac function against subsequent myo-cardial infarction injury. However, the effect of hypoxia on left ventricular after myocardial infarction is still unclear. This study therefore aims to investigate the effects of hypoxia training on left ventricular remodeling in rabbits post myocardial infarction. Methods Adult male rabbits were randomly divided into three groups： group SO （sham operated）, group MI （myocardial infarc-tion only） and group MI-HT （myocardial infarction plus hypoxia training）. Myocardial infarction was induced by left ventricular branch ligation. Hypoxia training was performed in a hypobaric chamber （having equivalent condition at an altitude of 4000 m, FiO214.9%） for 1 h/day, 5 days/week for four weeks. At the endpoints, vascular endothelial growth factor （VEGF） in the plasma was measured. Infarct size and capillary density were detected by histology. Left ventricular remodeling and function were as-sessed by echocardiography.Results After the 4-week experiment, compared with the group SO, plasma VEGF levels in groups MI （130.27 ± 18.58 pg/mL,P〈 0.01） and MI-HT （181.93 ± 20.29 pg/mL,P〈 0.01） were significantly increased. Infarct size in Group MI-HT （29.67% ± 7.73%） was deceased remarkably, while its capillary density （816.0 ± 122.2/mm2） was significantly increased. For both groups MI and MI-HT, left ventricular end-diastolic and end-systolic dimensions were increased whereas left ventricular ejection fraction was decreased. However, compared with group MI, group MI-HT diminished left ventricular end-diastolic （15.86 ± 1.09 mm,P〈 0.05） and end-systolic dimensions （12.10 ± 1.20 mm,P〈 0.01） significantly and im-proved left ventricular ejection fraction （54.39 ± 12.74 mm,P〈 0.05）.ConclusionHypoxia training may improve left ven-tricular function and reduce remodeling via angiogenesis in rabbits with MI.
文摘Hydrodynamic lubrications between two plane plates with an intersection angle θ have been investigated us- ing the boundary slippage theory, and relations are obtained between dimensionless pressures and coordinate x, between bearing capacity, friction force, friction coefficient and di- mensionless slipping size factor. The results show that bear- ing capacity of two plane plates without boundary slippage significantly increases with increasing intersection angle θ when 0 〈 θ 〈 1°, whereas decreases with increasing in- tersection angle 0 when θ 〉 1°. The results also show that negative pressure occurs in fluid entrance region and bearing capacity decreases, and friction force and friction coefficient increase with the increase of dimensionless slipping size fac- tor.
基金Project supported by the National Natural Science Foundation of China(No.51609185)the State Key Laboratory of Ocean Engineering in Shanghai Jiao Tong University(No.1613)
文摘Under the as-welded condition the fatigue crack initiation period was considered nonexistent and Linear Elastic Fracture Mechanics（LEFM） was used to calculate fatigue strength for a range of weld geometries. Fracture mechanics assessment of welded joints requires accurate solutions for stress intensity factor（SIF）. However, the solutions for the SIF of complex welded joints are dificult to determine due to the complicated correction factors. Three methods for SIF prediction are discussed on illet welded specimens containing continuous or semi-elliptical surface cracks, including the traditional correction method Mk, the approximate correction method Kt, and the suggested additional crack size method（ac＋ae）.The new additional crack parameter ae is used to replace the stress concentration effect of weld proile Mk, which simpliies the calculation process. Experimental results are collected to support fatigue strength assessment of the additional crack size method.
文摘In this paper a model of transversal filter is presented to study the adaptive match of the time variant channel. The least mean square error filtering method is used to obtain the weighting coefficients of the filter. With the purpose of speeding up the convergence of the iteration equation of adaptive filtering, an adaptive factor of the iteration step size μa is derived in this paper. The result of computer simulation shows that in the case of using adaptive μa, the convergence speed of the iteration equation is increased 2 times approximately in comparison with constant μ1. The study suggests that the adaptive filter with adaptive μa have the performance to follow the change of time-variant characteristics of the channel.
基金supported by the National Natural Science Foundation of China(Grant No.51305329)the China Postdoctoral Science Foundation(Grant No.2014T70911)+1 种基金the Doctoral Foundation of Education Ministry of China(Grant No.20130201120040)Basic Research Project of Natural Science in Shaanxi Province(Grant No.2015JQ5183)
文摘To balance the convergence rate and steadystate error of blind source separation(BSS) algorithms, an efficient equivariant adaptive separation via independence(Efficient EASI) algorithm is proposed based on separating indicator, which was derived from the convergence condition of EASI, and can be used to evaluate the separation degree of separated signals. Furthermore, a nonlinear monotone increasing function between suitable step sizes and separating indicator is constructed to adaptively adjust step sizes, and forgetting factor is employed to weaken effects of data at the initial stage. Numerical case studies and experimental studies on a test bed with shell structures are provided to validate the efficiency improvement of the proposed method. This study can benefit for vibration & acoustic monitoring and control, and machinery condition monitoring and fault diagnosis.
