The development of modern engineering components and equipment features large size,intricate shape and long service life,which places greater demands on valid methods for fatigue performance analysis.Achieving a smoot...The development of modern engineering components and equipment features large size,intricate shape and long service life,which places greater demands on valid methods for fatigue performance analysis.Achieving a smooth transformation between small-scale laboratory specimens’fatigue properties and full-scale engineering components’fatigue strength has been a long-term challenge.In this work,two dominant factors impeding the smooth transformation—notch and size effect were experimentally studied,in which fatigue tests on Al 7075-T6511(a very high-strength aviation alloy)notched specimens of different scales were carried out.Fractography analyses identified the evidence of the size effect on notch fatigue damage evolution.Accordingly,the Energy Field Intensity(EFI)initially developed for multiaxial notch fatigue analysis was improved by utilizing the volume ratio of the Effective Damage Zones(EDZs)for size effect correction.In particular,it was extended to a probabilistic model considering the inherent variability of the fatigue phenomenon.The experimental data of Al 7075-T6511 notched specimens and the model-predicted results were compared,indicating the high potential of the proposed approach in fatigue evaluation under combined notch and size effects.展开更多
In order to gain a deeper understanding of the effect of pulsed current on the mechanical properties and size effect of nanocrystalline Ni foils,nanocrystalline Ni foils with different grain thickness-to-grain size ra...In order to gain a deeper understanding of the effect of pulsed current on the mechanical properties and size effect of nanocrystalline Ni foils,nanocrystalline Ni foils with different grain thickness-to-grain size ratios(λ)were prepared using pulsed electrodeposition in this paper and unidirectional tensile experiments were carried out at room temperature with different currents and their applied directions.The experimental results show that the nanocrystalline Ni foil produces an obvious electroplasticity effect after applying the current field,and when 300<λ<1100,the current weakens the size effect of nanocrystalline Ni foils to a certain extent,and the angle between the current direction and the deformation direction also affects the mechanical response of nanocrystalline Ni foils,and when the angle between the current direction and the deformation direction is 0°,electroplasticity effect is the best,and the current has the most significant effect of abating the size effect of the material.The mechanism of unidirectional tensile deformation of nanocrystalline Ni foils under the effect of pulsed current was analyzed using TEM and TKD.It was found that the applied pulse current increased the activity of the nanocrystalline boundaries,promoted the movement of dislocations,and reduced the tendency of dislocation entanglement.The higher the peak current density and the smaller the angle between the direction of the current and the direction of deformation,the smaller the grain boundary orientation difference,the more dispersed the grain orientation,and the lower the density of geometrically necessary dislocations(GND)in the deformed nanocrystalline foil,the more significant the effect on material plasticity improvement.展开更多
240 nm AlGaN-based micro-LEDs with different sizes are designed and fabricated.Then,the external quantum efficiency(EQE)and light extraction efficiency(LEE)are systematically investigated by comparing size and edge ef...240 nm AlGaN-based micro-LEDs with different sizes are designed and fabricated.Then,the external quantum efficiency(EQE)and light extraction efficiency(LEE)are systematically investigated by comparing size and edge effects.Here,it is revealed that the peak optical output power increases by 81.83%with the size shrinking from 50.0 to 25.0μm.Thereinto,the LEE increases by 26.21%and the LEE enhancement mainly comes from the sidewall light extraction.Most notably,transversemagnetic(TM)mode light intensifies faster as the size shrinks due to the tilted mesa side-wall and Al reflector design.However,when it turns to 12.5μm sized micro-LEDs,the output power is lower than 25.0μm sized ones.The underlying mechanism is that even though protected by SiO2 passivation,the edge effect which leads to current leakage and Shockley-Read-Hall(SRH)recombination deteriorates rapidly with the size further shrinking.Moreover,the ratio of the p-contact area to mesa area is much lower,which deteriorates the p-type current spreading at the mesa edge.These findings show a role of thumb for the design of high efficiency micro-LEDs with wavelength below 250 nm,which will pave the way for wide applications of deep ultraviolet(DUV)micro-LEDs.展开更多
The systematic investigation of the mechanical properties and microstructure evolution process of ultra-thin-walled Inconel 718 capillary brazing joints is of great significance because of the exceptionally high deman...The systematic investigation of the mechanical properties and microstructure evolution process of ultra-thin-walled Inconel 718 capillary brazing joints is of great significance because of the exceptionally high demands on its application.To achieve this objective,this study investigates the impact of three distinct brazing temperatures and five typical grain sizes on the brazed joints’mechanical properties and microstructure evolution process.Microstructural evolution analysis was conducted based on Electron Back Scatter Diffraction(EBSD),Scanning Electron Microscopy(SEM),X-Ray Diffraction(XRD),High-Resolution Transmission Electron Microscopy(HRTEM),and Focused Ion Beam(FIB).Besides,the mechanical properties and fracture behavior were studied based on the uniaxial tension tests and in-situ tension tests.The findings reveal that the brazing joint’s strength is higher for the fine-grain capillary than the coarse-grain one,primarily due to the formation of a dense branch structure composed of G-phase in the brazing seam.The effects of grain size,such as pinning and splitting,are amplified at higher brazing temperatures.Additionally,micro-cracks initiate around brittle intermetallic compounds and propagate through the eutectic zone,leading to a cleavage fracture mode.The fracture stress of fine-grain specimens is higher than that of coarse-grain due to the complex micro-crack path.Therefore,this study contributes significantly to the literature by highlighting the crucial impact of grain size on the brazing properties of ultra-thin-walled Inconel 718 structures.展开更多
Adopting the classical theory of hydrocodes,the constitutive relations of concretes are separated into an equation of state(EoS)which describes the volumetric behavior of concrete material and a strength model which d...Adopting the classical theory of hydrocodes,the constitutive relations of concretes are separated into an equation of state(EoS)which describes the volumetric behavior of concrete material and a strength model which depicts the shear properties of concrete.The experiments on the EoS of concrete is always challenging due to the technical difficulties and equipment limitations,especially for the specimen size effect on the EoS.Although some researchers investigate the shock properties of concretes by fly-plate impact tests,the specimens used in their tests are usually in one size.In this paper,the fly-plate impact tests on concrete specimens with different sizes are performed to investigate the size effect on the shock properties of concrete materials.The mechanical background of the size effect on the shock properties are revealed,which is related to the lateral rarefaction effect and the deviatoric stress produced in the specimen.According to the tests results,the modified EoS considering the size effect on the shock properties of concrete are proposed,which the bulk modulus of concrete is unpredicted by up to 20% if size effects are not accounted for.展开更多
It has been known that metal FeSiCr powders with large average particle sizes have been typically employed to prepare magnetic powder cores(SMCs),with few studies reported on the influence of magnetic properties for o...It has been known that metal FeSiCr powders with large average particle sizes have been typically employed to prepare magnetic powder cores(SMCs),with few studies reported on the influence of magnetic properties for original powders with various average particle sizes less than 10m.In this work,SiO_(2)-coated FeSiCr SMCs with different small particle sizes were synthesized using the sol-gel process.The contribution of SiO_(2)coating amount and voids to the soft magnetic properties was elaborated.The mechanism was revealed such that smaller particle sizes with less voids could be beneficial for reducing core loss in the SMCs.By optimizing the core structure,permeability and magnetic loss of 26 and 262 kW/cm^(3)at 100 kHz and 50 mT were achieved at a particle size of 4.8m and ethyl orthosilicate addition of 0.1 mL/g.The best DC stacking performance,reaching 87%,was observed at an ethyl orthosilicate addition rate of 0.25 mL/g under 100 Oe.Compared to other soft magnetic composites(SMCs),the FeSiCr/SiO_(2)SMCs exhibit significantly reduced magnetic loss.It further reduces the magnetic loss of the powder core,providing a new strategy for applications of SMCs at high frequencies.展开更多
Size effects are a well-documented phenomenon in heterogeneous catalysis,typically attributed to alterations in geometric and electronic properties.In this study,we investigate the influence of catalyst size in the pr...Size effects are a well-documented phenomenon in heterogeneous catalysis,typically attributed to alterations in geometric and electronic properties.In this study,we investigate the influence of catalyst size in the preparation of carbon nanotube(CNT)and the hydrogenation of 4,6-dinitroresorcinol(DNR)using Fe_(2)O_(3)and Pt catalysts,respectively.Various Fe_(2)O_(3)/Al_(2)O_(3)catalysts were synthesized for CNT growth through catalytic chemical vapor deposition.Our findings reveal a significant influence of Fe_(2)O_(3)nanoparticle size on the structure and yield of CNT.Specifically,CNT produced with Fe_(2)O_(3)/Al_(2)O_(3)containing 28%(mass)Fe loading exhibits abundant surface defects,an increased area for metal-particle immobilization,and a high carbon yield.This makes it a promising candidate for DNR hydrogenation.Utilizing this catalyst support,we further investigate the size effects of Pt nanoparticles on DNR hydrogenation.Larger Pt catalysts demonstrate a preference for 4,6-diaminoresorcinol generation at(100)sites,whereas smaller Pt catalysts are more susceptible to electronic properties.The kinetics insights obtained from this study have the potential to pave the way for the development of more efficient catalysts for both CNT synthesis and DNR hydrogenation.展开更多
The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the...The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the strength.However,most strength criteria neglect the strength variations caused by different grain characteristics in rocks.Furthermore,the traditional linear criteria tend to overestimate tensile strength and exhibit apex singularity.To address these shortcomings,a piecewise strength criterion that considers the grain size effect has been proposed.A part of an ellipse was employed to construct the envelope of the tensive-shear region on the meridian plane,to accurately reproduce the low tensile-compressive strength ratio.Based on the analysis of experimental data,both linear and exponential modification functions that account for grain size effects were integrated into the proposed criterion.The corresponding finite element algorithm has been implemented.The accuracy and applicability of the proposed criterion were validated by comparing with the experimental data.展开更多
FeS_(2) shows significant potential as cathode material for all-solid-state lithium batteries(ASSLBs)due to its high theoretical specific capacity,low cost,and environmental friendliness.However,the poor ion/electron ...FeS_(2) shows significant potential as cathode material for all-solid-state lithium batteries(ASSLBs)due to its high theoretical specific capacity,low cost,and environmental friendliness.However,the poor ion/electron conductivity and large volume variation effect of FeS_(2) inhibit its practical applications.Here,the influence of particle size of FeS_(2) on the corresponding sulfide-based solid-state batteries is carefully investigated by tuning FeS_(2) size.Moreover,low operating temperature is chosen to mitigate the large volume changes during cycling in the battery.S-FeS_(2) with smaller particle sizes delivers superior electrochemical performances than that of the larger L-FeS_(2) in Li_(5.5)PS_(4.5)Cl_(1.5)-based ASSLBs under different operating temperatures.S-FeS_(2) shows stable discharge capacities during 50 cycles with a current density of 0.1 m A/cm^(2)under -20℃.When the current density rises to 1.0 m A/cm^(2),it delivers an initial discharge capacity of 146.9 m Ah/g and maintains 63% of the capacity after 100 cycles.This work contributes to constructing ASSLBs enables excellent electrochemical performances under extreme operating temperatures.展开更多
To provide insight into the effect of grain size on the precipitation behavior ofγstrengthening super-alloy Inconel 718,a gradient nanostructure with a large grain size span(from 9 nm to tens of microns)along the dep...To provide insight into the effect of grain size on the precipitation behavior ofγstrengthening super-alloy Inconel 718,a gradient nanostructure with a large grain size span(from 9 nm to tens of microns)along the depth direction was achieved by mean of surface mechanical grinding treatment,followed by annealing upon 700-1000℃ for 1 h.The results reveal significant differences in the type and size of precipitates in samples with different grain sizes.Noγprecipitate was detected inside the grains as the grain size was refined down to 40 nm(NG-40)and 9 nm(NG-9).Forδphase,a significantly accelerated precipitation along grain boundary was observed in NG-40 upon 700℃ annealing.Interestingly,with the grain size drops to 9 nm,the precipitation ofδwas suppressed,with some nanosized MC carbides appearing upon annealing.The grain size effect of precipitation behavior endows NG-9 an ultra-high RT-hardness(5.2 GPa)after 1000℃ thermal exposure and an ultra-high hot-hardness(3.2 GPa)at 800℃.展开更多
Refractories have unique capabilities such as sustaining their shape and properties at extreme conditions such as the combination of high temperatures and thermal shock,contact with molten metals and slags and in some...Refractories have unique capabilities such as sustaining their shape and properties at extreme conditions such as the combination of high temperatures and thermal shock,contact with molten metals and slags and in some circumstances resistance to erosion from abrasive particles.Given the large processing output of the heavy industries such as the cement and steel ones which both require high temperature processes,the refractories structures span various meters and weight of several tons.As the water removal stage of hydraulic bonded castables in industrial sites takes hours(10-60 h)due to the risk of explosive spalling,efforts to mitigate it are commonly studied.This has provided theoretical understanding of the general aspects of drying and important tools,such as the thermogravimetry analysis(TGA),for the design of refractory compositions with higher explosive spalling resistance.However,the optimization of this process is still far from the industrial reality especially because the actual linings that require the drying are orders of magnitude larger than the samples considered in the laboratory tests.Therefore,this study proposed the analysis of the sample volume effect on the water removal dynamics through TGA of high alumina castables with calcium aluminate cement.Conventionalφ5 cm×5 cm cylindrical samples were assessed in a laboratory scale equipment whereas macro TGA were carried out considering 20 cm×20 cm×20 cm and 30 cm×30 cm×30 cm cubic samples.Additionally,the effect of polymeric fibers was also considered.It was found out that the different thermal gradients within the macro TGA samples resulted in an inflection on the sample’s heating rate and that the mass loss was affected by the volume considered,especially for the composition without additives.These findings highlight the requirement of carefully taking into consideration the different dimensional sizes and thermal gradients in the samples when analyzing and interpreting the laboratory studies,and especially when trying to extrapolate such results to the industrial reality.展开更多
In recent years,dye-sensitized solar cells(DSSCs)have attracted much attention due to their ability to efficiently convert light energy into electricity.The enhancement of electron transfer efficiency and the suppress...In recent years,dye-sensitized solar cells(DSSCs)have attracted much attention due to their ability to efficiently convert light energy into electricity.The enhancement of electron transfer efficiency and the suppression of interfacial charge recombination are essential for the development of DSSCs.Polyoxometalates(POMs)have already been confirmed to act as effective electron-transfer mediators for accepting and delivering electrons remaining the integrated structure.Due to size effect,nano-sized POMs with more active sites,exposed more surface area,and changed electronic structure enhance the inherent activity.Further,the nano-sized POMs aiming on titanium dioxide(TiO_(2))shortens the electron transport distance,accelerate the electron transfer,and effectively suppresses the electron-hole recombination,thus improving the electron utilization and enhancing the power conversion efficiency(PCE)of the DSSCs.Taking PMo_(12) as an example,we prepared PMo_(12) to a nanometer size of about 50 nm by freeze-drying technology and further combined with TiO_(2)as photoanodes.To our satisfying surprise,a significant improvement of PCE in DSSCs is obtained as high as 8.12%,which is 22.3%and 47.3%higher than the original PMo_(12)/TiO_(2)composite material and TiO_(2)alone,respectively.展开更多
To understand the tensile deformation of electro-deposited Cu with nano-scale twins, a numerical study was carried out based on a conventional theory of mechanism-based strain gradient plasticity （CMSG）. The concept...To understand the tensile deformation of electro-deposited Cu with nano-scale twins, a numerical study was carried out based on a conventional theory of mechanism-based strain gradient plasticity （CMSG）. The concept of twin lamella strengthening zone was used in terms of the cohesive interface model to simulate grain-boundary sliding and separation. The model included a number of material parameters, such as grain size, elastic modulus, plastic strain hardening exponent, initial yield stress, as well as twin lamellar distribution, which may contribute to size effects of twin layers in Cu polycrystalline. The results provide information to understand the mechanical behaviors of Cu with nano-scale growth twins.展开更多
The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like ...The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like screening model. Association pathway and dissocia-tion pathway were investigated by the comparison of several energies. The cleavage energy of Pd（PR3）2 complex was calculated, as well as the oxidative addition reaction barrier energy of Pd（PR3）n （n=1,2） with aryl bromide in N,N-dimethylformamide solvent. This study proved that the ligands volume possessed a great impact on the mechanism of oxidative addition： less bulky ligand palladium associated with aryl bromide via two donor ligands,but larger bulky ligand palladium coordinated via monoligand.展开更多
Micro radial compression tests were carried out on cylindrical specimens of pure copper polycrystals with different grain sizes. Experimental results indicated that phenomena of decreasing forming force, increasing sc...Micro radial compression tests were carried out on cylindrical specimens of pure copper polycrystals with different grain sizes. Experimental results indicated that phenomena of decreasing forming force, increasing scatter of forming force and more irregular surface topography occurred with the increase of grain size. A modified surface model based on dislocations pile-up in surface layer grains, and a flow stress scattering formulation based on standard deviation and grain size distribution were proposed to analyze size effects on forming force in micro compression. The inhomogeneous deformation of surface layer grains was discussed by the main deformation manner of rotation. A good agreement with the experimental results was achieved.展开更多
To investigate the effects of thickness and grain size on mechanical and deformation properties of C5210 phosphor bronze thin sheets, samples with different grain sizes were obtained through annealing heat treatment a...To investigate the effects of thickness and grain size on mechanical and deformation properties of C5210 phosphor bronze thin sheets, samples with different grain sizes were obtained through annealing heat treatment at different temperatures; and then tensile tests of samples with different thicknesses and grain sizes were conducted at room temperature. The results show that yield strength increases with decreasing thickness from 800 to 50 μm, but work hardening exponent and total elongation decrease, and a modified model was proposed to describe the relation between yield strength and thickness; yield strength decreases as the grain size increases, but work hardening exponent shows an increasing trend, total elongation increases to a peak and then decreases. Fracture morphology of tensile specimens was observed by SEM, which indicates that all tensile specimens are ductile fracture. The dimple intensity increases as the specimen thickness increases but reduces with the specimen grain size increasing.展开更多
Aluminum alloy （Al-alloy） thin-walled （D/t ＆gt; 20, diameter D, wall thickness t） bent tubes have attracted increasing applications in many industries with mass quantities and diverse specifications due to satisf...Aluminum alloy （Al-alloy） thin-walled （D/t ＆gt; 20, diameter D, wall thickness t） bent tubes have attracted increasing applications in many industries with mass quantities and diverse specifications due to satisfying high strength to weigh ratio requirements of product manufacturing. However, due to nonlinear nature of bending with coupling effects of multiple factors, the similarity theory seems not applicable and there occurs a challenge for efficient and reliable evaluation of the bending formability of thin-walled tube with various bending specifications. Considering the unequal deformation and three major instabilities, the bending formability of thin-walled Al-alloy tube in changing tube sizes such as D and t are clarified via both the analytical and FE modeling/ simulations. The experiments of rotary draw bending are conducted to validate the theoretical models and further confirm ＇size effect＇ related bending formability. The major results show that （1） The anti-wrinkling capability of tube decreases with the larger D and smaller t, and the effect significance of t is larger than that of D even under rigid supports; （2） The wall thinning increases with the larger D and smaller t, and this tendency becomes much more obvious under rigid supports; （3） The cross-section deformation increases with the larger D and smaller t according to the analytical model obtained intrinsic relationship, while this tendency becomes opposite due to the nonlinear role of mandrel die; （4） The size factor D/t can be used as a nondimensional index to evaluate both the bending formability regarding the wall thinning and cross-section deformation.展开更多
Numerical method is popular in analysing the blast wave propagation and interaction with structures.However,because of the extremely short duration of blast wave and energy trans-mission between different grids,the nu...Numerical method is popular in analysing the blast wave propagation and interaction with structures.However,because of the extremely short duration of blast wave and energy trans-mission between different grids,the numerical results are sensitive to the finite element mesh size.Previous numerical simulations show that a mesh size acceptable to one blast scenario might not be proper for another case,even though the difference between the two scenarios is very small,indicating a simple numerical mesh size convergence test might not be enough to guarantee accu-rate numerical results.Therefore,both coarse mesh and fine mesh were used in different blast scenarios to investigate the mesh size effect on numerical results of blast wave propagation and interaction with structures.Based on the numerical results and their comparison with field test re-sults and the design charts in TM5-1300,a numerical modification method was proposed to correct the influence of the mesh size on the simulated results.It can be easily used to improve the accu-racy of the numerical results of blast wave propagation and blast loads on structures.展开更多
The influences of I,article size on the mechanical properties of the particulate metal matrix composite;are obviously displayed in the experimental observations. However, the phenomenon can not be predicted directly u...The influences of I,article size on the mechanical properties of the particulate metal matrix composite;are obviously displayed in the experimental observations. However, the phenomenon can not be predicted directly using the conventional elastic-plastic theory. It is because that no length scale parameters are involved in the conventional theory. In the present research, using the strain gradient plasticity theory, a systematic research of the particle size effect in the particulate metal matrix composite is carried out. The roles of many composite factors, such as: the particle size, the Young's modulus of the particle, the particle aspect ratio and volume fraction, as well as the plastic strain hardening exponent of the matrix material, are studied in detail. In order to obtain a general understanding for the composite behavior, two kinds of particle shapes, ellipsoid and cylinder, are considered to check the strength dependence of the smooth or non-smooth particle surface. Finally, the prediction results will be applied to the several experiments about the ceramic particle-reinforced metal-matrix composites. The material length scale parameter is predicted.展开更多
Understanding the size effect exhibited by the fracture mechanism of anisotropic geomaterials is important for engineering practice. In this study, the anisotropic features of the nominal strength, apparent fracture t...Understanding the size effect exhibited by the fracture mechanism of anisotropic geomaterials is important for engineering practice. In this study, the anisotropic features of the nominal strength, apparent fracture toughness, effective fracture energy and fracture process zone(FPZ) size of geomaterials were first analyzed by systematic size effect fracture experiments. The results showed that the nominal strength and the apparent fracture toughness decreased with increasing bedding plane inclination angle.The larger the specimen size was, the smaller the nominal strength and the larger the apparent fracture toughness was. When the bedding inclination angle increased from 0° to 90°, the effective fracture energy and the effective FPZ size both first decreased and then increased within two complex variation stages that were bounded by the 45° bedding angle. Regardless of the inherent anisotropy of geomaterials,the nominal strength and apparent fracture toughness can be predicted by the energy-based size effect law, which demonstrates that geomaterials have obvious quasi-brittle characteristics. Theoretical analysis indicated that the true fracture toughness and energy dissipation can be calculated by linear elastic fracture mechanics only when the brittleness number is higher than 10;otherwise, size effect tests should be adopted to determine the fracture parameters.展开更多
基金support from the Key Program of the National Natural Science Foundation of China(No.12232004)the Training Program of the Sichuan Province Science and the Technology Innovation Seedling Project(No.MZGC20230012)are acknowledged.
文摘The development of modern engineering components and equipment features large size,intricate shape and long service life,which places greater demands on valid methods for fatigue performance analysis.Achieving a smooth transformation between small-scale laboratory specimens’fatigue properties and full-scale engineering components’fatigue strength has been a long-term challenge.In this work,two dominant factors impeding the smooth transformation—notch and size effect were experimentally studied,in which fatigue tests on Al 7075-T6511(a very high-strength aviation alloy)notched specimens of different scales were carried out.Fractography analyses identified the evidence of the size effect on notch fatigue damage evolution.Accordingly,the Energy Field Intensity(EFI)initially developed for multiaxial notch fatigue analysis was improved by utilizing the volume ratio of the Effective Damage Zones(EDZs)for size effect correction.In particular,it was extended to a probabilistic model considering the inherent variability of the fatigue phenomenon.The experimental data of Al 7075-T6511 notched specimens and the model-predicted results were compared,indicating the high potential of the proposed approach in fatigue evaluation under combined notch and size effects.
基金Project(51975167)supported by the National Natural Science Foundation of China。
文摘In order to gain a deeper understanding of the effect of pulsed current on the mechanical properties and size effect of nanocrystalline Ni foils,nanocrystalline Ni foils with different grain thickness-to-grain size ratios(λ)were prepared using pulsed electrodeposition in this paper and unidirectional tensile experiments were carried out at room temperature with different currents and their applied directions.The experimental results show that the nanocrystalline Ni foil produces an obvious electroplasticity effect after applying the current field,and when 300<λ<1100,the current weakens the size effect of nanocrystalline Ni foils to a certain extent,and the angle between the current direction and the deformation direction also affects the mechanical response of nanocrystalline Ni foils,and when the angle between the current direction and the deformation direction is 0°,electroplasticity effect is the best,and the current has the most significant effect of abating the size effect of the material.The mechanism of unidirectional tensile deformation of nanocrystalline Ni foils under the effect of pulsed current was analyzed using TEM and TKD.It was found that the applied pulse current increased the activity of the nanocrystalline boundaries,promoted the movement of dislocations,and reduced the tendency of dislocation entanglement.The higher the peak current density and the smaller the angle between the direction of the current and the direction of deformation,the smaller the grain boundary orientation difference,the more dispersed the grain orientation,and the lower the density of geometrically necessary dislocations(GND)in the deformed nanocrystalline foil,the more significant the effect on material plasticity improvement.
基金This work was supported by National Key R&D Program of China(2022YFB3605103)the National Natural Science Foundation of China(62204241,U22A2084,62121005,and 61827813)+3 种基金the Natural Science Foundation of Jilin Province(20230101345JC,20230101360JC,and 20230101107JC)the Youth Innovation Promotion Association of CAS(2023223)the Young Elite Scientist Sponsorship Program By CAST(YESS20200182)the CAS Talents Program(E30122E4M0).
文摘240 nm AlGaN-based micro-LEDs with different sizes are designed and fabricated.Then,the external quantum efficiency(EQE)and light extraction efficiency(LEE)are systematically investigated by comparing size and edge effects.Here,it is revealed that the peak optical output power increases by 81.83%with the size shrinking from 50.0 to 25.0μm.Thereinto,the LEE increases by 26.21%and the LEE enhancement mainly comes from the sidewall light extraction.Most notably,transversemagnetic(TM)mode light intensifies faster as the size shrinks due to the tilted mesa side-wall and Al reflector design.However,when it turns to 12.5μm sized micro-LEDs,the output power is lower than 25.0μm sized ones.The underlying mechanism is that even though protected by SiO2 passivation,the edge effect which leads to current leakage and Shockley-Read-Hall(SRH)recombination deteriorates rapidly with the size further shrinking.Moreover,the ratio of the p-contact area to mesa area is much lower,which deteriorates the p-type current spreading at the mesa edge.These findings show a role of thumb for the design of high efficiency micro-LEDs with wavelength below 250 nm,which will pave the way for wide applications of deep ultraviolet(DUV)micro-LEDs.
基金co-supported by the National Natural Science Foundation of China(No.52105316)the National Natural Foundation of Jiangxi,China(No.2021BAB214046)+1 种基金the Fundamental Research Funds for the Central Universities,China(No.501LKQB2022107021)Young Elite Scientists Sponsorship Program by the China Association for Science and Technology(No.YESS20200397)。
文摘The systematic investigation of the mechanical properties and microstructure evolution process of ultra-thin-walled Inconel 718 capillary brazing joints is of great significance because of the exceptionally high demands on its application.To achieve this objective,this study investigates the impact of three distinct brazing temperatures and five typical grain sizes on the brazed joints’mechanical properties and microstructure evolution process.Microstructural evolution analysis was conducted based on Electron Back Scatter Diffraction(EBSD),Scanning Electron Microscopy(SEM),X-Ray Diffraction(XRD),High-Resolution Transmission Electron Microscopy(HRTEM),and Focused Ion Beam(FIB).Besides,the mechanical properties and fracture behavior were studied based on the uniaxial tension tests and in-situ tension tests.The findings reveal that the brazing joint’s strength is higher for the fine-grain capillary than the coarse-grain one,primarily due to the formation of a dense branch structure composed of G-phase in the brazing seam.The effects of grain size,such as pinning and splitting,are amplified at higher brazing temperatures.Additionally,micro-cracks initiate around brittle intermetallic compounds and propagate through the eutectic zone,leading to a cleavage fracture mode.The fracture stress of fine-grain specimens is higher than that of coarse-grain due to the complex micro-crack path.Therefore,this study contributes significantly to the literature by highlighting the crucial impact of grain size on the brazing properties of ultra-thin-walled Inconel 718 structures.
基金supported by the National Natural Science Foundation of China[Grant Nos.51938011 and 51908405]Australian Research Council。
文摘Adopting the classical theory of hydrocodes,the constitutive relations of concretes are separated into an equation of state(EoS)which describes the volumetric behavior of concrete material and a strength model which depicts the shear properties of concrete.The experiments on the EoS of concrete is always challenging due to the technical difficulties and equipment limitations,especially for the specimen size effect on the EoS.Although some researchers investigate the shock properties of concretes by fly-plate impact tests,the specimens used in their tests are usually in one size.In this paper,the fly-plate impact tests on concrete specimens with different sizes are performed to investigate the size effect on the shock properties of concrete materials.The mechanical background of the size effect on the shock properties are revealed,which is related to the lateral rarefaction effect and the deviatoric stress produced in the specimen.According to the tests results,the modified EoS considering the size effect on the shock properties of concrete are proposed,which the bulk modulus of concrete is unpredicted by up to 20% if size effects are not accounted for.
基金supported by the National Natural Science Foundation of China(Grant Nos.U2230119 and U23A20567)2022 Central Guidance on Local Science and Technology Development Projects(Grant No.2022ZYDF073)Outstanding Youth Fund of Sichuan Province(Grant No.22JCQN0005).
文摘It has been known that metal FeSiCr powders with large average particle sizes have been typically employed to prepare magnetic powder cores(SMCs),with few studies reported on the influence of magnetic properties for original powders with various average particle sizes less than 10m.In this work,SiO_(2)-coated FeSiCr SMCs with different small particle sizes were synthesized using the sol-gel process.The contribution of SiO_(2)coating amount and voids to the soft magnetic properties was elaborated.The mechanism was revealed such that smaller particle sizes with less voids could be beneficial for reducing core loss in the SMCs.By optimizing the core structure,permeability and magnetic loss of 26 and 262 kW/cm^(3)at 100 kHz and 50 mT were achieved at a particle size of 4.8m and ethyl orthosilicate addition of 0.1 mL/g.The best DC stacking performance,reaching 87%,was observed at an ethyl orthosilicate addition rate of 0.25 mL/g under 100 Oe.Compared to other soft magnetic composites(SMCs),the FeSiCr/SiO_(2)SMCs exhibit significantly reduced magnetic loss.It further reduces the magnetic loss of the powder core,providing a new strategy for applications of SMCs at high frequencies.
基金financially supported by the National Key Research and Development Program of China(2022YFA1503504)the National Natural Science Foundation of China(22038003,22178100,22178101,and U22B20141)+3 种基金the Shanghai Pilot Program for Basic Research(22TQ1400100-15)the Innovation Program of Shanghai Municipal Education Commissionthe Program of Shanghai Academic/Technology Research Leader(21XD1421000)the Shanghai Science and Technology Innovation Action Plan(22JC1403800)。
文摘Size effects are a well-documented phenomenon in heterogeneous catalysis,typically attributed to alterations in geometric and electronic properties.In this study,we investigate the influence of catalyst size in the preparation of carbon nanotube(CNT)and the hydrogenation of 4,6-dinitroresorcinol(DNR)using Fe_(2)O_(3)and Pt catalysts,respectively.Various Fe_(2)O_(3)/Al_(2)O_(3)catalysts were synthesized for CNT growth through catalytic chemical vapor deposition.Our findings reveal a significant influence of Fe_(2)O_(3)nanoparticle size on the structure and yield of CNT.Specifically,CNT produced with Fe_(2)O_(3)/Al_(2)O_(3)containing 28%(mass)Fe loading exhibits abundant surface defects,an increased area for metal-particle immobilization,and a high carbon yield.This makes it a promising candidate for DNR hydrogenation.Utilizing this catalyst support,we further investigate the size effects of Pt nanoparticles on DNR hydrogenation.Larger Pt catalysts demonstrate a preference for 4,6-diaminoresorcinol generation at(100)sites,whereas smaller Pt catalysts are more susceptible to electronic properties.The kinetics insights obtained from this study have the potential to pave the way for the development of more efficient catalysts for both CNT synthesis and DNR hydrogenation.
基金Project(2023YFC2907403)supported by the National Key R&D Program of ChinaProject(52074021)supported by the National Natural Science Foundation of China+1 种基金Project(2242045)supported by Beijing Natural Science Foundation,ChinaProject(ZD202216)supported by the Beijing Association of Higher Education,China。
文摘The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the strength.However,most strength criteria neglect the strength variations caused by different grain characteristics in rocks.Furthermore,the traditional linear criteria tend to overestimate tensile strength and exhibit apex singularity.To address these shortcomings,a piecewise strength criterion that considers the grain size effect has been proposed.A part of an ellipse was employed to construct the envelope of the tensive-shear region on the meridian plane,to accurately reproduce the low tensile-compressive strength ratio.Based on the analysis of experimental data,both linear and exponential modification functions that account for grain size effects were integrated into the proposed criterion.The corresponding finite element algorithm has been implemented.The accuracy and applicability of the proposed criterion were validated by comparing with the experimental data.
基金supported by the National Key Research and Development Program(No.2021YFB2400300)the National Natural Science Foundation of China(No.52177214)supported by China Fujian Energy Devices Science and Technology Innovation Laboratory Open Fund(No.21C-OP202211)。
文摘FeS_(2) shows significant potential as cathode material for all-solid-state lithium batteries(ASSLBs)due to its high theoretical specific capacity,low cost,and environmental friendliness.However,the poor ion/electron conductivity and large volume variation effect of FeS_(2) inhibit its practical applications.Here,the influence of particle size of FeS_(2) on the corresponding sulfide-based solid-state batteries is carefully investigated by tuning FeS_(2) size.Moreover,low operating temperature is chosen to mitigate the large volume changes during cycling in the battery.S-FeS_(2) with smaller particle sizes delivers superior electrochemical performances than that of the larger L-FeS_(2) in Li_(5.5)PS_(4.5)Cl_(1.5)-based ASSLBs under different operating temperatures.S-FeS_(2) shows stable discharge capacities during 50 cycles with a current density of 0.1 m A/cm^(2)under -20℃.When the current density rises to 1.0 m A/cm^(2),it delivers an initial discharge capacity of 146.9 m Ah/g and maintains 63% of the capacity after 100 cycles.This work contributes to constructing ASSLBs enables excellent electrochemical performances under extreme operating temperatures.
基金supported by the Strategic Pri-ority Research Program of the Chinese Academy of Sciences(No.XDB0510400)the National Natural Science Foundation of China(No.52225102)the Youth Innovation Promotion Association CAS(No.2023201).
文摘To provide insight into the effect of grain size on the precipitation behavior ofγstrengthening super-alloy Inconel 718,a gradient nanostructure with a large grain size span(from 9 nm to tens of microns)along the depth direction was achieved by mean of surface mechanical grinding treatment,followed by annealing upon 700-1000℃ for 1 h.The results reveal significant differences in the type and size of precipitates in samples with different grain sizes.Noγprecipitate was detected inside the grains as the grain size was refined down to 40 nm(NG-40)and 9 nm(NG-9).Forδphase,a significantly accelerated precipitation along grain boundary was observed in NG-40 upon 700℃ annealing.Interestingly,with the grain size drops to 9 nm,the precipitation ofδwas suppressed,with some nanosized MC carbides appearing upon annealing.The grain size effect of precipitation behavior endows NG-9 an ultra-high RT-hardness(5.2 GPa)after 1000℃ thermal exposure and an ultra-high hot-hardness(3.2 GPa)at 800℃.
基金the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior-Brasil(CAPES)-Finance Code 001.The authors would like to thank the Fundacao de Amparo a Pesquisa do Estado de Sao Paulo-FAPESP(grant number:2021/00251-0).Finally,the authors are also greatly thankful for FIRE support to carry out this work.
文摘Refractories have unique capabilities such as sustaining their shape and properties at extreme conditions such as the combination of high temperatures and thermal shock,contact with molten metals and slags and in some circumstances resistance to erosion from abrasive particles.Given the large processing output of the heavy industries such as the cement and steel ones which both require high temperature processes,the refractories structures span various meters and weight of several tons.As the water removal stage of hydraulic bonded castables in industrial sites takes hours(10-60 h)due to the risk of explosive spalling,efforts to mitigate it are commonly studied.This has provided theoretical understanding of the general aspects of drying and important tools,such as the thermogravimetry analysis(TGA),for the design of refractory compositions with higher explosive spalling resistance.However,the optimization of this process is still far from the industrial reality especially because the actual linings that require the drying are orders of magnitude larger than the samples considered in the laboratory tests.Therefore,this study proposed the analysis of the sample volume effect on the water removal dynamics through TGA of high alumina castables with calcium aluminate cement.Conventionalφ5 cm×5 cm cylindrical samples were assessed in a laboratory scale equipment whereas macro TGA were carried out considering 20 cm×20 cm×20 cm and 30 cm×30 cm×30 cm cubic samples.Additionally,the effect of polymeric fibers was also considered.It was found out that the different thermal gradients within the macro TGA samples resulted in an inflection on the sample’s heating rate and that the mass loss was affected by the volume considered,especially for the composition without additives.These findings highlight the requirement of carefully taking into consideration the different dimensional sizes and thermal gradients in the samples when analyzing and interpreting the laboratory studies,and especially when trying to extrapolate such results to the industrial reality.
基金supported by the National Natural Science Foundation of China(52070035,22271042,21871041,and 22401039)Jilin Province Scientific and Technological Planning Project of China(20200403001SF)+3 种基金Science and Technology Research Project of the Education Department of Jilin Province(JJKH20211286KJ)the Natural Science Foundation of Jilin Province(20180101298JC)Fundamental Research Funds for the Central Universities(2412022ZD009)Start-up Fund for Doctoral Research of Northeast Electric Power University(BSJXM-2024112)
文摘In recent years,dye-sensitized solar cells(DSSCs)have attracted much attention due to their ability to efficiently convert light energy into electricity.The enhancement of electron transfer efficiency and the suppression of interfacial charge recombination are essential for the development of DSSCs.Polyoxometalates(POMs)have already been confirmed to act as effective electron-transfer mediators for accepting and delivering electrons remaining the integrated structure.Due to size effect,nano-sized POMs with more active sites,exposed more surface area,and changed electronic structure enhance the inherent activity.Further,the nano-sized POMs aiming on titanium dioxide(TiO_(2))shortens the electron transport distance,accelerate the electron transfer,and effectively suppresses the electron-hole recombination,thus improving the electron utilization and enhancing the power conversion efficiency(PCE)of the DSSCs.Taking PMo_(12) as an example,we prepared PMo_(12) to a nanometer size of about 50 nm by freeze-drying technology and further combined with TiO_(2)as photoanodes.To our satisfying surprise,a significant improvement of PCE in DSSCs is obtained as high as 8.12%,which is 22.3%and 47.3%higher than the original PMo_(12)/TiO_(2)composite material and TiO_(2)alone,respectively.
文摘To understand the tensile deformation of electro-deposited Cu with nano-scale twins, a numerical study was carried out based on a conventional theory of mechanism-based strain gradient plasticity （CMSG）. The concept of twin lamella strengthening zone was used in terms of the cohesive interface model to simulate grain-boundary sliding and separation. The model included a number of material parameters, such as grain size, elastic modulus, plastic strain hardening exponent, initial yield stress, as well as twin lamellar distribution, which may contribute to size effects of twin layers in Cu polycrystalline. The results provide information to understand the mechanical behaviors of Cu with nano-scale growth twins.
基金This work was supported by the National Natural Science Foundation of China （No.20776089） and the New Century Excellent Talents Program of Ministry of Education （No.NCET-05-0783）. The State Key Laboratory of Polymer Materials Engineering in Sichuan University was acknowledged for providing dmol3 modules and Prof. Ying Xue, Xiang-yuan Li, and Quan Zhu were grateful for the useful discussions.
文摘The process and mechanism of the ligand volume controlled Pd（PR3）2 （PR3=PH3, PMe3, and PtBu3） oxidative addition with aryl bromide were investigated, using density functional theory method with the conductor-like screening model. Association pathway and dissocia-tion pathway were investigated by the comparison of several energies. The cleavage energy of Pd（PR3）2 complex was calculated, as well as the oxidative addition reaction barrier energy of Pd（PR3）n （n=1,2） with aryl bromide in N,N-dimethylformamide solvent. This study proved that the ligands volume possessed a great impact on the mechanism of oxidative addition： less bulky ligand palladium associated with aryl bromide via two donor ligands,but larger bulky ligand palladium coordinated via monoligand.
基金Project(51375113)supported by the National Natural Science Foundation of China
文摘Micro radial compression tests were carried out on cylindrical specimens of pure copper polycrystals with different grain sizes. Experimental results indicated that phenomena of decreasing forming force, increasing scatter of forming force and more irregular surface topography occurred with the increase of grain size. A modified surface model based on dislocations pile-up in surface layer grains, and a flow stress scattering formulation based on standard deviation and grain size distribution were proposed to analyze size effects on forming force in micro compression. The inhomogeneous deformation of surface layer grains was discussed by the main deformation manner of rotation. A good agreement with the experimental results was achieved.
文摘To investigate the effects of thickness and grain size on mechanical and deformation properties of C5210 phosphor bronze thin sheets, samples with different grain sizes were obtained through annealing heat treatment at different temperatures; and then tensile tests of samples with different thicknesses and grain sizes were conducted at room temperature. The results show that yield strength increases with decreasing thickness from 800 to 50 μm, but work hardening exponent and total elongation decrease, and a modified model was proposed to describe the relation between yield strength and thickness; yield strength decreases as the grain size increases, but work hardening exponent shows an increasing trend, total elongation increases to a peak and then decreases. Fracture morphology of tensile specimens was observed by SEM, which indicates that all tensile specimens are ductile fracture. The dimple intensity increases as the specimen thickness increases but reduces with the specimen grain size increasing.
基金the National Natural Science Foundation of China (No. 50905144)the Program for New Century Excellent Talents in University, the Natural Science Basic Research Plan in Shaanxi Province (No. 2011JQ6004)the 111 Project (No. B08040) for the support given to this research
文摘Aluminum alloy （Al-alloy） thin-walled （D/t ＆gt; 20, diameter D, wall thickness t） bent tubes have attracted increasing applications in many industries with mass quantities and diverse specifications due to satisfying high strength to weigh ratio requirements of product manufacturing. However, due to nonlinear nature of bending with coupling effects of multiple factors, the similarity theory seems not applicable and there occurs a challenge for efficient and reliable evaluation of the bending formability of thin-walled tube with various bending specifications. Considering the unequal deformation and three major instabilities, the bending formability of thin-walled Al-alloy tube in changing tube sizes such as D and t are clarified via both the analytical and FE modeling/ simulations. The experiments of rotary draw bending are conducted to validate the theoretical models and further confirm ＇size effect＇ related bending formability. The major results show that （1） The anti-wrinkling capability of tube decreases with the larger D and smaller t, and the effect significance of t is larger than that of D even under rigid supports; （2） The wall thinning increases with the larger D and smaller t, and this tendency becomes much more obvious under rigid supports; （3） The cross-section deformation increases with the larger D and smaller t according to the analytical model obtained intrinsic relationship, while this tendency becomes opposite due to the nonlinear role of mandrel die; （4） The size factor D/t can be used as a nondimensional index to evaluate both the bending formability regarding the wall thinning and cross-section deformation.
基金Supported by National Natural Science Foundation of China (No.50638030, 50528808)the National Key Technologies R&D Program of China (No.2006BAJ13B02)the Australian Research Council (No.DP0774061).
文摘Numerical method is popular in analysing the blast wave propagation and interaction with structures.However,because of the extremely short duration of blast wave and energy trans-mission between different grids,the numerical results are sensitive to the finite element mesh size.Previous numerical simulations show that a mesh size acceptable to one blast scenario might not be proper for another case,even though the difference between the two scenarios is very small,indicating a simple numerical mesh size convergence test might not be enough to guarantee accu-rate numerical results.Therefore,both coarse mesh and fine mesh were used in different blast scenarios to investigate the mesh size effect on numerical results of blast wave propagation and interaction with structures.Based on the numerical results and their comparison with field test re-sults and the design charts in TM5-1300,a numerical modification method was proposed to correct the influence of the mesh size on the simulated results.It can be easily used to improve the accu-racy of the numerical results of blast wave propagation and blast loads on structures.
基金The project, supported by the National Natural Science Foundation of China (19891180, 19925211) and by the Chinese Academy of Sciences (KJ951-1-201) and "Bai Ren" plan
文摘The influences of I,article size on the mechanical properties of the particulate metal matrix composite;are obviously displayed in the experimental observations. However, the phenomenon can not be predicted directly using the conventional elastic-plastic theory. It is because that no length scale parameters are involved in the conventional theory. In the present research, using the strain gradient plasticity theory, a systematic research of the particle size effect in the particulate metal matrix composite is carried out. The roles of many composite factors, such as: the particle size, the Young's modulus of the particle, the particle aspect ratio and volume fraction, as well as the plastic strain hardening exponent of the matrix material, are studied in detail. In order to obtain a general understanding for the composite behavior, two kinds of particle shapes, ellipsoid and cylinder, are considered to check the strength dependence of the smooth or non-smooth particle surface. Finally, the prediction results will be applied to the several experiments about the ceramic particle-reinforced metal-matrix composites. The material length scale parameter is predicted.
基金the National Natural Science Foundation of China(Nos.U22A20166,51904190,12172230,11872258 and U19A2098)the Department of Science and Technology of Guangdong Province(No.2019ZT08G315)MOE Laboratory of Deep Earth Science and Engineering(No.DESE202102).
文摘Understanding the size effect exhibited by the fracture mechanism of anisotropic geomaterials is important for engineering practice. In this study, the anisotropic features of the nominal strength, apparent fracture toughness, effective fracture energy and fracture process zone(FPZ) size of geomaterials were first analyzed by systematic size effect fracture experiments. The results showed that the nominal strength and the apparent fracture toughness decreased with increasing bedding plane inclination angle.The larger the specimen size was, the smaller the nominal strength and the larger the apparent fracture toughness was. When the bedding inclination angle increased from 0° to 90°, the effective fracture energy and the effective FPZ size both first decreased and then increased within two complex variation stages that were bounded by the 45° bedding angle. Regardless of the inherent anisotropy of geomaterials,the nominal strength and apparent fracture toughness can be predicted by the energy-based size effect law, which demonstrates that geomaterials have obvious quasi-brittle characteristics. Theoretical analysis indicated that the true fracture toughness and energy dissipation can be calculated by linear elastic fracture mechanics only when the brittleness number is higher than 10;otherwise, size effect tests should be adopted to determine the fracture parameters.
