Spray deposit distribution from a field sprayer is mainly affected by the boom movements when the tractor is driven over a rough soil surface,the pendulum suspension that used to reduce and control the movement of spr...Spray deposit distribution from a field sprayer is mainly affected by the boom movements when the tractor is driven over a rough soil surface,the pendulum suspension that used to reduce and control the movement of spray boom by isolating the boom from vibrations of the tractor will directly enhance uniform deposition of chemicals.However,how to match the parameters of the suspension with the properties of the boom is the key problem.The dynamic rigid-flexible coupling model of the virtual prototype of the spray boom suspension system was established by using ADAMS and ABAQUS software.An optimization of the suspension parameters for a large spay boom was carried out based on the optimal Latin hypercube design,radial basis function neural network,and multi-objective genetic algorithm NSGA-II.After modified parameters of the suspension,the travel of the sprayer on a typical field motion track was simulated based on a six DOF motion simulator,and the dynamic behavior of the boom suspension was measured.The results show that RMS of the measured boom roll angle and the boom center displacement for optimized solution were reduced by 14.76%and 12.43%compared with the original suspension.Finally,the inertial measurement unit(IMU)was used to measure the movements of the sprayer vehicle during the pesticide application on the Hongze Lake Farm,the experiment of field condition reproduced by using the six DOF motion simulator,the standard deviation of the roll angle and vibration displacement for the optimized sprayer boom are only 0.6382°and 62.279 mm respectively.The research provides theoretical basis and experimental method for parameter optimization of large scale boom suspension.展开更多
The kinematics of robots mainly analyses the transformational relation between links and the end-actuator position and orientation of robots,its two kinds of topics mainly include:direct kinematics topic and inverse k...The kinematics of robots mainly analyses the transformational relation between links and the end-actuator position and orientation of robots,its two kinds of topics mainly include:direct kinematics topic and inverse kinematics topic[1].This paper mainly researched the inverse kinematics of Six-DOF robots,built Six-DOF robots inverse kinematics model with D-H parameter model,and worked out the robot’s homogeneous transformation matrix[2].Now we will build the model and study to the inverse kinematics of RBT-6SO3S which from Jiang Su Hui-Bo Robots Company.展开更多
Because of its characteristics of simple algorithm and hardware, optical flow-based motion estimation has become a hot research field, especially in GPS-denied environment. Optical flow could be used to obtain the air...Because of its characteristics of simple algorithm and hardware, optical flow-based motion estimation has become a hot research field, especially in GPS-denied environment. Optical flow could be used to obtain the aircraft motion information, but the six-(degree of freedom)(6-DOF) motion still couldn't be accurately estimated by existing methods. The purpose of this work is to provide a motion estimation method based on optical flow from forward and down looking cameras, which doesn't rely on the assumption of level flight. First, the distribution and decoupling method of optical flow from forward camera are utilized to get attitude. Then, the resulted angular velocities are utilized to obtain the translational optical flow of the down camera, which can eliminate the influence of rotational motion on velocity estimation. Besides, the translational motion estimation equation is simplified by establishing the relation between the depths of feature points and the aircraft altitude. Finally, simulation results show that the method presented is accurate and robust.展开更多
The dynamical equation of a six degrees of freedom(DOF) Stewart-type simulator with load and impact force is derived. By associating the direct solution to acceleration with the inverse solution to force, an equivalen...The dynamical equation of a six degrees of freedom(DOF) Stewart-type simulator with load and impact force is derived. By associating the direct solution to acceleration with the inverse solution to force, an equivalent power element model of the simulator is further presented, which offers the basis for analysis and design of the control system of the simulator.展开更多
基金This study was financially supported by the National Key Research and Development Program of China(2016YFD0200705)the National Natural Science Foundation of China(Grant No.51605236)the Independent Innovation Fund of Agricultural Science and Technology of Jiangsu Province(CX(16)1043).
文摘Spray deposit distribution from a field sprayer is mainly affected by the boom movements when the tractor is driven over a rough soil surface,the pendulum suspension that used to reduce and control the movement of spray boom by isolating the boom from vibrations of the tractor will directly enhance uniform deposition of chemicals.However,how to match the parameters of the suspension with the properties of the boom is the key problem.The dynamic rigid-flexible coupling model of the virtual prototype of the spray boom suspension system was established by using ADAMS and ABAQUS software.An optimization of the suspension parameters for a large spay boom was carried out based on the optimal Latin hypercube design,radial basis function neural network,and multi-objective genetic algorithm NSGA-II.After modified parameters of the suspension,the travel of the sprayer on a typical field motion track was simulated based on a six DOF motion simulator,and the dynamic behavior of the boom suspension was measured.The results show that RMS of the measured boom roll angle and the boom center displacement for optimized solution were reduced by 14.76%and 12.43%compared with the original suspension.Finally,the inertial measurement unit(IMU)was used to measure the movements of the sprayer vehicle during the pesticide application on the Hongze Lake Farm,the experiment of field condition reproduced by using the six DOF motion simulator,the standard deviation of the roll angle and vibration displacement for the optimized sprayer boom are only 0.6382°and 62.279 mm respectively.The research provides theoretical basis and experimental method for parameter optimization of large scale boom suspension.
文摘The kinematics of robots mainly analyses the transformational relation between links and the end-actuator position and orientation of robots,its two kinds of topics mainly include:direct kinematics topic and inverse kinematics topic[1].This paper mainly researched the inverse kinematics of Six-DOF robots,built Six-DOF robots inverse kinematics model with D-H parameter model,and worked out the robot’s homogeneous transformation matrix[2].Now we will build the model and study to the inverse kinematics of RBT-6SO3S which from Jiang Su Hui-Bo Robots Company.
基金Project(2012CB720003)supported by the National Basic Research Program of ChinaProjects(61320106010,61127007,61121003,61573019)supported by the National Natural Science Foundation of ChinaProject(2013DFE13040)supported by the Special Program for International Science and Technology Cooperation from Ministry of Science and Technology of China
文摘Because of its characteristics of simple algorithm and hardware, optical flow-based motion estimation has become a hot research field, especially in GPS-denied environment. Optical flow could be used to obtain the aircraft motion information, but the six-(degree of freedom)(6-DOF) motion still couldn't be accurately estimated by existing methods. The purpose of this work is to provide a motion estimation method based on optical flow from forward and down looking cameras, which doesn't rely on the assumption of level flight. First, the distribution and decoupling method of optical flow from forward camera are utilized to get attitude. Then, the resulted angular velocities are utilized to obtain the translational optical flow of the down camera, which can eliminate the influence of rotational motion on velocity estimation. Besides, the translational motion estimation equation is simplified by establishing the relation between the depths of feature points and the aircraft altitude. Finally, simulation results show that the method presented is accurate and robust.
文摘The dynamical equation of a six degrees of freedom(DOF) Stewart-type simulator with load and impact force is derived. By associating the direct solution to acceleration with the inverse solution to force, an equivalent power element model of the simulator is further presented, which offers the basis for analysis and design of the control system of the simulator.
