We develop and implement a Stochastic Discrete Event Simulation(SDES)algorithm to model the housing re-covery trajectory after an extreme event.The algorithm models discrete events and their underlying uncertainties i...We develop and implement a Stochastic Discrete Event Simulation(SDES)algorithm to model the housing re-covery trajectory after an extreme event.The algorithm models discrete events and their underlying uncertainties in each construction phase.Specifically,the algorithm is developed for the Government Assisted Owner Driven(GAOD)reconstruction system to simulate long-term recovery trajectory.SDES,as a flexible modeling approach,can simulate any housing recovery scenario that follows phased reconstruction.The 2015 M 7.8 Gorkha earthquake sequence in Nepal is considered the extreme event,with 796,245 buildings requiring reconstruction.We present some recovery trajectories from severely hit,crisis hit,and earthquake hit parishes,comparing them with the actual reconstruction progress.We also assess quality and improvement of reconstructed buildings using seismic fragility functions,compared to pre-earthquake constructions.Housing recovery uncertainties are dissected in relation to reconstruction pace.We conclude that the vast majority of the reconstructed buildings followed the Build Back Better(BBB)approach and missed the opportunity to pursue the Build Back Resilient(BBR)approach due to multifaceted challenges ranging from unclear policies to economic constraints.We critically assess the GAOD vs Owner Driven(OD)recovery framework and conclude that insurance-supported and technically assisted OD approach could be the most suitable model for post extreme event housing recovery.展开更多
Modern metropolises are increasingly affected by air quality problems. Transportation is one of the largest sources of several pollutants emissions, such as nitrogen oxides (NOx) and carbon monoxide (CO). Today in the...Modern metropolises are increasingly affected by air quality problems. Transportation is one of the largest sources of several pollutants emissions, such as nitrogen oxides (NOx) and carbon monoxide (CO). Today in the EU, vehicles' emissions are strictly limited by Euro 6 norm-Euro VI for heavy-duty vehicles-which is periodically upgraded. To match such limits, manufacturers are forced in developing new technologies to perform new sustainable vehicles design strategies, such as EVs and HEVs. Present work's aim is to provide the design of series-hybrid urban transportation bus, equipped with a novel thermal power unit, namely a small gas turbine, to exploit its cleaner combustion process in comparison with an ICE. The control logic is described, while the main drivetrain components are chosen, and suitable models from suppliers are selected as well. Then, some simulations of the resulting vehicle are performed on opportune drive cycles, using Advisor, a free software based on Matlab-Simulink environment, published by US' National Renewable Energy Laboratory (NREL). Two different final configurations are environmentally and economically analysed, with the thermal power unit being respectively fuelled by compressed natural gas (CNG) and liquefied petroleum gas (LPG). Both satisfy the Euro VI norms, showing a substantial emission reduction (-89% and -43% in CO and THC releases respectively) in comparison to pollutants' threshold values.展开更多
In this paper,the forecasting equations of a 2nd-order space-time differential remainder are deduced from the Navier-Stokes primitive equations and Eulerian operator by Taylor-series expansion.Here we introduce a cubi...In this paper,the forecasting equations of a 2nd-order space-time differential remainder are deduced from the Navier-Stokes primitive equations and Eulerian operator by Taylor-series expansion.Here we introduce a cubic spline numerical model(Spline Model for short),which is with a quasi-Lagrangian time-split integration scheme of fitting cubic spline/bicubic surface to all physical variable fields in the atmospheric equations on spherical discrete latitude-longitude mesh.A new algorithm of"fitting cubic spline—time step integration—fitting cubic spline—……"is developed to determine their first-and2nd-order derivatives and their upstream points for time discrete integral to the governing equations in Spline Model.And the cubic spline function and its mathematical polarities are also discussed to understand the Spline Model’s mathematical foundation of numerical analysis.It is pointed out that the Spline Model has mathematical laws of"convergence"of the cubic spline functions contracting to the original functions as well as its 1st-order and 2nd-order derivatives.The"optimality"of the 2nd-order derivative of the cubic spline functions is optimal approximation to that of the original functions.In addition,a Hermite bicubic patch is equivalent to operate on a grid for a 2nd-order derivative variable field.Besides,the slopes and curvatures of a central difference are identified respectively,with a smoothing coefficient of 1/3,three-point smoothing of that of a cubic spline.Then the slopes and curvatures of a central difference are calculated from the smoothing coefficient 1/3 and three-point smoothing of that of a cubic spline,respectively.Furthermore,a global simulation case of adiabatic,non-frictional and"incompressible"model atmosphere is shown with the quasi-Lagrangian time integration by using a global Spline Model,whose initial condition comes from the NCEP reanalysis data,along with quasi-uniform latitude-longitude grids and the so-called"shallow atmosphere"Navier-Stokes primitive equations in the spherical coordinates.The Spline Model,which adopted the Navier-Stokes primitive equations and quasi-Lagrangian time-split integration scheme,provides an initial ideal case of global atmospheric circulation.In addition,considering the essentially non-linear atmospheric motions,the Spline Model could judge reasonably well simple points of any smoothed variable field according to its fitting spline curvatures that must conform to its physical interpretation.展开更多
We developed a detailed simulation model of the Arctic marine transport system(MTS) for oil platform Prirazlomnaya. The model has a multidisciplinary nature and involves: sub-models of various transport and technologi...We developed a detailed simulation model of the Arctic marine transport system(MTS) for oil platform Prirazlomnaya. The model has a multidisciplinary nature and involves: sub-models of various transport and technological processes; stochastic weather generator to obtain time series of 15 environmental parameters; and contextual planning algorithm to build voyage plan considering several types of ships and cargoes. We used a significant amount of real operational data to identify model parameters and to prove its statistical reliability. Our main scientific task is to investigate the interaction of various processes of a different nature, while the practical aim is to find a set of measures to increase the efficiency of MTS. The results of the study reveal many examples of the mutual interaction of various processes that need to be considered at the design stage to avoid technical mistakes.The study formed a basis for making managerial decisions at the top level of Gazprom Neft Shelf Company.展开更多
This paper deals with the increasing safety of working in aggressive potential locations, having SCADA system and WSN sensors, using a “probabilistic strategy” in comparison with a “deterministic” one, modeling/si...This paper deals with the increasing safety of working in aggressive potential locations, having SCADA system and WSN sensors, using a “probabilistic strategy” in comparison with a “deterministic” one, modeling/simulation and application in underground coal mining. In general, three conditions can be considered: 1) an unfriendly environment that facilitates the risk of accidents, 2) aggressive equipments that can compete to cause accidents and 3) the work security breaches that can cause accidents. These conditions define the triangle of accidents and are customized for an underground coal mining where the methane gas is released with the exploitation of the massive coal. In this case, the first two conditions create an explosive potential atmosphere. To allow people to work in a safe location it needs: first, a continuing monitoring through SCADA system of the explosive potential atmosphere and second, the use of antiexplosive equipment. This method, named “deterministic strategy”, increases the safety of working, but the explosions have not been completely eliminated. In order to increase the safety of working, the paper continues with the presentation of a new method based on hazard laws, named “probabilistic strategy”. This strategy was validated through modeling/simulation using CupCarbon software platform, and application of WSN networks implemented on Arduino equipments. At the end of the paper the interesting conclusions are emphases which are applicable to both strategies.展开更多
In this study,the multi-scale(meso and macro)modelling was used to predict the electric response of the material.Porosity was introduced through a sugar-templating process to enhance compressibility and sensitivity.Me...In this study,the multi-scale(meso and macro)modelling was used to predict the electric response of the material.Porosity was introduced through a sugar-templating process to enhance compressibility and sensitivity.Mean-field homogenization was employed to predict the electrical conductivity of the nanocomposites,which was validated experimentally through I–V characterisation,confirming stable Ohmic behavior.The homogenised material parameters were incorporated into COMSOLMultiphysics to simulate diaphragmdeflection and capacitance variation under applied pressure.Experimental results showed a linear and stable capacitance response at the force magnitude of 0–7 N.The Graphene nanoplatelets(GnP)–Polydimethylsiloxane(PDMS)sensor demonstrated superior sensitivity(0.0032 pF/N)compared to the CNT–PDMS sensor(0.0019 pF/N),attributed to improved filler dispersion and higher effective surface area of GnP.Finite element simulations were further conducted to evaluate stress distribution in a GnP–PDMS-based capacitive sensor integrated into a shoe insole for gait analysis.The results correlated well with experimental capacitance changes,validating the sensor’s mechanical reliability and pressure sensitivity.This comparative study establishes the GnP–PDMS composite as a more effective candidate for low-cost,biocompatible,and high-performance flexible pressure sensors in wearable biomedical and gait monitoring applications.展开更多
Compared to the well-studied two-dimensional(2D)ferroelectricity,the appearance of 2D antiferroelectricity is much rarer,where local dipoles from the nonequivalent sublattices within 2D monolayers are oppositely orien...Compared to the well-studied two-dimensional(2D)ferroelectricity,the appearance of 2D antiferroelectricity is much rarer,where local dipoles from the nonequivalent sublattices within 2D monolayers are oppositely oriented.Using NbOCl_(2) monolayer with competing ferroelectric(FE)and antiferroelectric(AFE)phases as a 2D material platform,we demonstrate the emergence of intrinsic antiferroelectricity in NbOCl_(2) monolayer under experimentally accessible shear strain,along with new functionality associated with electric field-induced AFE-to-FE phase transition.Specifically,the complex configuration space accommodating FE and AFE phases,polarization switching kinetics,and finite temperature thermodynamic properties of 2D NbOCl_(2) are all accurately predicted by large-scale molecular dynamics simulations based on deep learning interatomic potential model.Moreover,room temperature stable antiferroelectricity with low polarization switching barrier and one-dimensional collinear polarization arrangement is predicted in shear-deformed NbOCl_(2) monolayer.The transition from AFE to FE phase in 2D NbOCl_(2) can be triggered by a low critical electric field,leading to a double polarization–electric(P–E)loop with small hysteresis.A new type of optoelectronic device composed of AFE-NbOCl_(2) is proposed,enabling electric“writing”and nonlinear optical“reading”logical operation with fast operation speed and low power consumption.展开更多
The kinetic parameters of hydrocarbon generation are determined through experimental simulation and mathematical calculation using four typical samples selected from the Cretaceous Nenjiang Formation in the northwest ...The kinetic parameters of hydrocarbon generation are determined through experimental simulation and mathematical calculation using four typical samples selected from the Cretaceous Nenjiang Formation in the northwest of Songliao Basin,Chang 7 Member of Triassic Yanchang Formation in the southwest of Ordos Basin,Paleogene in the southwest of Qaidam Basin,and Lucaogou Formation of Jimusar Sag in the east of Junggar Basin.The results show that activation energy of hydrocarbon generation of organic matter is closely related to maturity and mainly ranges between 197 kJ/mol and 227 kJ/mol.On this basis,the temperature required for organic matter in shale to convert into oil was calculated.The ideal heating temperature is between 270℃and 300℃,and the conversation rate can reach 90%after 50-300 days of heating at constant temperature.When the temperature rises at a constant rate,the temperature corresponding to the major hydrocarbon generation period ranges from 225 to 350℃at the temperature rise rate of 1-150℃/month.In order to obtain higher economic benefits,it is suggested to adopt higher temperature rise rate(60-150℃/month).The more reliable kinetic parameters obtained can provide a basis for designing more reasonable scheme of in-situ heating conversion.展开更多
Numerical simulation of diode-pumped Q-switched Nd:YAG laser leading to the generation of eye-safe signal in singly resonant Intracavity Optical Parametric Oscillator (IOPO) is presented. Starting from rate equations,...Numerical simulation of diode-pumped Q-switched Nd:YAG laser leading to the generation of eye-safe signal in singly resonant Intracavity Optical Parametric Oscillator (IOPO) is presented. Starting from rate equations, the time dependent laser equations have been solved numerically, whereas the space-dependent OPO equations analytically. Our results show that 1.4 J diode laser (810 nm) pulse with 200 msec width, delivers 30 mJ Nd:YAG laser (1064 nm) pulse with 5 n-second width. This Nd:YAG laser further generates 9 mJ eye safe signal (1570 nm) pulse with 2.5 n-second width.展开更多
Large quantities of blast furnace(BF) slag and CO_2 are discharged annually from iron and steel industries, along with a large amount of waste heat.The mineral carbonation of BF slag can not only reduce emissions of s...Large quantities of blast furnace(BF) slag and CO_2 are discharged annually from iron and steel industries, along with a large amount of waste heat.The mineral carbonation of BF slag can not only reduce emissions of solid waste but also realize the in-situ fixation of CO_2 with low energy consumption if integrated with the waste heat utilization.In this study, based on our previous works, Aspen Plus was employed to simulate and optimize the carbonation process and integrate the process energy.The effects of gehlenite extraction, MgSO_4 carbonation,and aluminum ammonium sulfate crystallization were studied systematically.The simulation results demonstrate that 2.57 kg of BF slag can sequester 1 kg of CO_2, requiring 5.34 MJ of energy(3.3 MJ heat and 2.04 MJ electricity), and this energy includes the capture of CO_2 from industrial flue gases.Approximately 60 kg net CO_2 emission reduction could be achieved for the disposal of one ton of BF slag.In addition, the by-product,aluminum ammonium sulfate, is a high value-added product.Preliminary economic analysis indicates that the profit for the whole process is 1127 CNY per ton of BF slag processed.展开更多
Reliability of power systems is a key aspect in modern power system planning, design, and operation. The ascendance of the smart grid concept has provided high hopes of developing an intelligent network that is capabl...Reliability of power systems is a key aspect in modern power system planning, design, and operation. The ascendance of the smart grid concept has provided high hopes of developing an intelligent network that is capable of being a self-healing grid, offering the ability to overcome the interruption problems that face the utility and cost it tens of millions in repair and loss. In this work, we develop a MATLAB code to examine the effect of the smart grid applications in improving the reliability of the power distribution networks via Monte Carlo Simulation approach. The system used in this paper is the IEEE 34 test feeder. The objective is to measure the installations of the Automatic Reclosers (ARs) as well as the Distributed Generators (DGs) on the reliability indices, SAIDI, SAIFI, CAIDI and EUE, and make comparisons with results from a previous study done by the authors using another approach. The MATLAB code should provide close results to the output of the previous research to verify its effectiveness.展开更多
The temperature dependence of the density of states in strong magnetic fields. On the basis of the model constructed, a computer program calculating the density of electronic states in a quantizing magnetic field. Use...The temperature dependence of the density of states in strong magnetic fields. On the basis of the model constructed, a computer program calculating the density of electronic states in a quantizing magnetic field. Used new, based on quantum statistics, the approach to the calculation of the temperature dependence of the density of states in a strong magnetic field. Mathematical modeling of the density of states using the experimental values of a continuous density of states makes it possible to calculate the Landau levels.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Based on the damage constitutive model for concrete, the Weibull distribution function was used to characterize the random distribution of the mechanical properties of materials by finely subdividing concrete slab ele...Based on the damage constitutive model for concrete, the Weibull distribution function was used to characterize the random distribution of the mechanical properties of materials by finely subdividing concrete slab elements, and a concrete random mesoscopic damage model was established. The seismic response of a 100-m high concrete face rockfill dam(CFRD), subjected to ground motion with different intensities, was simulated with the three-dimensional finite element method(FEM), with emphasis on exploration of damage and the cracking process of concrete slabs during earthquakes as well as analysis of dynamic damage and cracking characteristics during strong earthquakes. The calculated results show that the number of damaged and cracking elements on concrete slabs grows with the duration of earthquakes. With increasing earthquake intensity, the damaged zone and cracking zone on concrete slabs grow wider. During a 7.0-magnitude earthquake, the stress level of concrete slabs is low for the CFRD, and there is almost no damage or slight damage to the slabs. While during a 9.0-magnitude strong earthquake, the percentages of damaged elements and macrocracking elements continuously ascend with the duration of the earthquake, peaking at approximately 26% and 5% at the end of the earthquake, respectively. The concrete random mesoscopic damage model can depict the entire process of sprouting, growing, connecting, and expanding of cracks on a concrete slab during earthquakes.展开更多
The present work relates to a numerical investigation of double diffusive mixed convection around a horizontal annulus with a finned inner cylinder.The solutal and thermal buoyancy forces are sustained by maintaining ...The present work relates to a numerical investigation of double diffusive mixed convection around a horizontal annulus with a finned inner cylinder.The solutal and thermal buoyancy forces are sustained by maintaining the inner and outer cylinders at uniform temperatures and concentrations.Buoyancy effects are also considered,with the Boussinesq approximation.The forced convection effect is induced by the outer cylinder rotating with an angular velocity(ω)in an anti-clockwise direction.The studies are made for various combinations of dimensionless numbers;buoyancy ratio number(N),Lewis number(Le),Richardson number(Ri)and Grashof number(Gr).The isotherms,isoconcentrations and streamlines as well as both average and local Nusselt and Sherwood numbers were studied.A finite volume scheme is adopted to solve the transport equations for continuity,momentum,energy and mass transfer.The results indicate that the use of fins on the inner cylinder with outer cylinder rotation,significantly improves the heat and mass transfer in the annulus.展开更多
This paper posits that we are living in a computer simulation to simulate physical reality which has the same computer simulation process as virtual reality (computer-simulated reality). The computer simulation proces...This paper posits that we are living in a computer simulation to simulate physical reality which has the same computer simulation process as virtual reality (computer-simulated reality). The computer simulation process involves the digital representation of data, the mathematical computation of the digitized data in geometric formation and transformation in space-time, and the selective retention of events in a narrative. Conventional physics cannot explain physical reality clearly, while computer-simulated physics can explain physical reality clearly by using the computer simulation process consisting of the digital representation component, the mathematical computation component, and the selective retention component. For the digital representation component, the three intrinsic data (properties) are rest mass-kinetic energy, electric charge, and spin which are represented by the digital space structure, the digital spin, and the digital electric charge, respectively. The digital representations of rest mass and kinetic energy are 1 as attachment space for the space of matter and 0 as detachment space for the zero-space of matter, respectively, to explain the Higgs field, the reverse Higgs field, quantum mechanics, special relativity, force fields, dark matter, and baryonic matter. The digital representations of the exclusive and the inclusive occupations of positions are 1/2 spin fermion and integer spin boson, respectively, to explain spatial translation by supersymmetry transformation and dark energy. The digital representations of the allowance and the disallowance of irreversible kinetic energy are integral electric charges and fractional electric charges, respectively, to explain the confinements of quarks and quasiparticles. For the mathematical computation component, the mathematical computation involves the reversible multiverse and oscillating M-theory as oscillating membrane-string-particle whose space-time dimension (D) number oscillates between 11D and 10D and between 10D and 4D to explain cosmology. For the selective retention component, gravity, the strong force, electromagnetism, and the weak force are the retained events during the reversible four-stage evolution of our universe, and are unified by the common narrative of the evolution.展开更多
In recent years,three-dimensional reconstruction technologies that employ multiple cameras have continued to evolve significantly,enabling remote collaboration among users in extended Reality(XR)environments.In additi...In recent years,three-dimensional reconstruction technologies that employ multiple cameras have continued to evolve significantly,enabling remote collaboration among users in extended Reality(XR)environments.In addition,methods for deploying multiple cameras for motion capture of users(e.g.,performers)are widely used in computer graphics.As the need to minimize and optimize the number of cameras grows to reduce costs,various technologies and research approaches focused on Optimal Camera Placement(OCP)are continually being proposed.However,as most existing studies assume homogeneous camera setups,there is a growing demand for studies on heterogeneous camera setups.For instance,technical demands keep emerging in scenarios with minimal camera configurations,especially regarding cost factors,the physical placement of cameras given the spatial structure,and image capture strategies for heterogeneous cameras,such as high-resolution RGB cameras and depth cameras.In this study,we propose a pre-visualization and simulation method for the optimal placement of heterogeneous cameras in XR environments,accounting for both the specifications of heterogeneous cameras(e.g.,field of view)and the physical configuration(e.g.,wall configuration)in real-world spaces.The proposed method performs a visibility analysis of cameras by considering each camera’s field-of-view volume,resolution,and unique characteristics,along with physicalspace constraints.This approach enables the optimal position and rotation of each camera to be recommended,along with the minimum number of cameras required.In the results of our study conducted in heterogeneous camera combinations,the proposed method achieved 81.7%~82.7%coverage of the target visual information using only 2~3 cameras.In contrast,single(or homogeneous)-typed cameras were required to use 11 cameras for 81.6%coverage.Accordingly,we found that camera deployment resources can be reduced with the proposed approaches.展开更多
Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted dru...Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.展开更多
BACKGROUND Orthopaedic surgical education has traditionally depended on the apprenticeship model of“see one,do one,teach one”.However,reduced operative exposure,stricter work-hour regulations,medicolegal constraints...BACKGROUND Orthopaedic surgical education has traditionally depended on the apprenticeship model of“see one,do one,teach one”.However,reduced operative exposure,stricter work-hour regulations,medicolegal constraints,and patient safety concerns have constrained its practicality.Simulation-based training has become a reliable,safe,and cost-efficient alternative.Dry lab techniques,especially virtual and augmented reality,make up 78%of current dry lab research,whereas wet labs still set the standard for anatomical realism.AIM To evaluate the effectiveness,limitations,and future directions of wet and dry lab simulation in orthopaedic training.METHODS A scoping review was carried out across four databases-PubMed,Cochrane Library,Web of Science,and EBSCOhost-up to 2025.Medical Subject Headings included:"Orthopaedic Education","Wet Lab","Dry Lab","Simulation Training","Virtual Reality",and"Surgical Procedure".Eligible studies focused on orthopaedic or spinal surgical education,employed wet or dry lab techniques,and assessed training effectiveness.Exclusion criteria consisted of non-English publications,abstracts only,non-orthopaedic research,and studies unrelated to simulation.Two reviewers independently screened titles,abstracts,and full texts,resolving discrepancies with a third reviewer.RESULTS From 1851 records,101 studies met inclusion:78 on dry labs,7 on wet labs,4 on both.Virtual reality(VR)simulations were most common,with AI increasingly used for feedback and assessment.Cadaveric training remains the gold standard for accuracy and tactile feedback,while dry labs-especially VR-offer scalability,lower cost(40%-60%savings in five studies),and accessibility for novices.Senior residents prefer wet labs for complex tasks;juniors favour dry labs for basics.Challenges include limited transferability data,lack of standard outcome metrics,and ethical concerns about cadaver use and AI assessment.CONCLUSION Wet and dry labs each have unique strengths in orthopaedic training.A hybrid approach combining both,supported by standardised assessments and outcome studies,is most effective.Future efforts should aim for uniform reporting,integrating new technologies,and policy support for hybrid curricula to enhance skills and patient care.展开更多
文摘We develop and implement a Stochastic Discrete Event Simulation(SDES)algorithm to model the housing re-covery trajectory after an extreme event.The algorithm models discrete events and their underlying uncertainties in each construction phase.Specifically,the algorithm is developed for the Government Assisted Owner Driven(GAOD)reconstruction system to simulate long-term recovery trajectory.SDES,as a flexible modeling approach,can simulate any housing recovery scenario that follows phased reconstruction.The 2015 M 7.8 Gorkha earthquake sequence in Nepal is considered the extreme event,with 796,245 buildings requiring reconstruction.We present some recovery trajectories from severely hit,crisis hit,and earthquake hit parishes,comparing them with the actual reconstruction progress.We also assess quality and improvement of reconstructed buildings using seismic fragility functions,compared to pre-earthquake constructions.Housing recovery uncertainties are dissected in relation to reconstruction pace.We conclude that the vast majority of the reconstructed buildings followed the Build Back Better(BBB)approach and missed the opportunity to pursue the Build Back Resilient(BBR)approach due to multifaceted challenges ranging from unclear policies to economic constraints.We critically assess the GAOD vs Owner Driven(OD)recovery framework and conclude that insurance-supported and technically assisted OD approach could be the most suitable model for post extreme event housing recovery.
文摘Modern metropolises are increasingly affected by air quality problems. Transportation is one of the largest sources of several pollutants emissions, such as nitrogen oxides (NOx) and carbon monoxide (CO). Today in the EU, vehicles' emissions are strictly limited by Euro 6 norm-Euro VI for heavy-duty vehicles-which is periodically upgraded. To match such limits, manufacturers are forced in developing new technologies to perform new sustainable vehicles design strategies, such as EVs and HEVs. Present work's aim is to provide the design of series-hybrid urban transportation bus, equipped with a novel thermal power unit, namely a small gas turbine, to exploit its cleaner combustion process in comparison with an ICE. The control logic is described, while the main drivetrain components are chosen, and suitable models from suppliers are selected as well. Then, some simulations of the resulting vehicle are performed on opportune drive cycles, using Advisor, a free software based on Matlab-Simulink environment, published by US' National Renewable Energy Laboratory (NREL). Two different final configurations are environmentally and economically analysed, with the thermal power unit being respectively fuelled by compressed natural gas (CNG) and liquefied petroleum gas (LPG). Both satisfy the Euro VI norms, showing a substantial emission reduction (-89% and -43% in CO and THC releases respectively) in comparison to pollutants' threshold values.
文摘In this paper,the forecasting equations of a 2nd-order space-time differential remainder are deduced from the Navier-Stokes primitive equations and Eulerian operator by Taylor-series expansion.Here we introduce a cubic spline numerical model(Spline Model for short),which is with a quasi-Lagrangian time-split integration scheme of fitting cubic spline/bicubic surface to all physical variable fields in the atmospheric equations on spherical discrete latitude-longitude mesh.A new algorithm of"fitting cubic spline—time step integration—fitting cubic spline—……"is developed to determine their first-and2nd-order derivatives and their upstream points for time discrete integral to the governing equations in Spline Model.And the cubic spline function and its mathematical polarities are also discussed to understand the Spline Model’s mathematical foundation of numerical analysis.It is pointed out that the Spline Model has mathematical laws of"convergence"of the cubic spline functions contracting to the original functions as well as its 1st-order and 2nd-order derivatives.The"optimality"of the 2nd-order derivative of the cubic spline functions is optimal approximation to that of the original functions.In addition,a Hermite bicubic patch is equivalent to operate on a grid for a 2nd-order derivative variable field.Besides,the slopes and curvatures of a central difference are identified respectively,with a smoothing coefficient of 1/3,three-point smoothing of that of a cubic spline.Then the slopes and curvatures of a central difference are calculated from the smoothing coefficient 1/3 and three-point smoothing of that of a cubic spline,respectively.Furthermore,a global simulation case of adiabatic,non-frictional and"incompressible"model atmosphere is shown with the quasi-Lagrangian time integration by using a global Spline Model,whose initial condition comes from the NCEP reanalysis data,along with quasi-uniform latitude-longitude grids and the so-called"shallow atmosphere"Navier-Stokes primitive equations in the spherical coordinates.The Spline Model,which adopted the Navier-Stokes primitive equations and quasi-Lagrangian time-split integration scheme,provides an initial ideal case of global atmospheric circulation.In addition,considering the essentially non-linear atmospheric motions,the Spline Model could judge reasonably well simple points of any smoothed variable field according to its fitting spline curvatures that must conform to its physical interpretation.
文摘We developed a detailed simulation model of the Arctic marine transport system(MTS) for oil platform Prirazlomnaya. The model has a multidisciplinary nature and involves: sub-models of various transport and technological processes; stochastic weather generator to obtain time series of 15 environmental parameters; and contextual planning algorithm to build voyage plan considering several types of ships and cargoes. We used a significant amount of real operational data to identify model parameters and to prove its statistical reliability. Our main scientific task is to investigate the interaction of various processes of a different nature, while the practical aim is to find a set of measures to increase the efficiency of MTS. The results of the study reveal many examples of the mutual interaction of various processes that need to be considered at the design stage to avoid technical mistakes.The study formed a basis for making managerial decisions at the top level of Gazprom Neft Shelf Company.
文摘This paper deals with the increasing safety of working in aggressive potential locations, having SCADA system and WSN sensors, using a “probabilistic strategy” in comparison with a “deterministic” one, modeling/simulation and application in underground coal mining. In general, three conditions can be considered: 1) an unfriendly environment that facilitates the risk of accidents, 2) aggressive equipments that can compete to cause accidents and 3) the work security breaches that can cause accidents. These conditions define the triangle of accidents and are customized for an underground coal mining where the methane gas is released with the exploitation of the massive coal. In this case, the first two conditions create an explosive potential atmosphere. To allow people to work in a safe location it needs: first, a continuing monitoring through SCADA system of the explosive potential atmosphere and second, the use of antiexplosive equipment. This method, named “deterministic strategy”, increases the safety of working, but the explosions have not been completely eliminated. In order to increase the safety of working, the paper continues with the presentation of a new method based on hazard laws, named “probabilistic strategy”. This strategy was validated through modeling/simulation using CupCarbon software platform, and application of WSN networks implemented on Arduino equipments. At the end of the paper the interesting conclusions are emphases which are applicable to both strategies.
文摘In this study,the multi-scale(meso and macro)modelling was used to predict the electric response of the material.Porosity was introduced through a sugar-templating process to enhance compressibility and sensitivity.Mean-field homogenization was employed to predict the electrical conductivity of the nanocomposites,which was validated experimentally through I–V characterisation,confirming stable Ohmic behavior.The homogenised material parameters were incorporated into COMSOLMultiphysics to simulate diaphragmdeflection and capacitance variation under applied pressure.Experimental results showed a linear and stable capacitance response at the force magnitude of 0–7 N.The Graphene nanoplatelets(GnP)–Polydimethylsiloxane(PDMS)sensor demonstrated superior sensitivity(0.0032 pF/N)compared to the CNT–PDMS sensor(0.0019 pF/N),attributed to improved filler dispersion and higher effective surface area of GnP.Finite element simulations were further conducted to evaluate stress distribution in a GnP–PDMS-based capacitive sensor integrated into a shoe insole for gait analysis.The results correlated well with experimental capacitance changes,validating the sensor’s mechanical reliability and pressure sensitivity.This comparative study establishes the GnP–PDMS composite as a more effective candidate for low-cost,biocompatible,and high-performance flexible pressure sensors in wearable biomedical and gait monitoring applications.
基金supported by the National Natural Science Foundation of China (Grant No.11574244 for G.Y.G.)the XJTU Research Fund for AI Science (Grant No.2025YXYC011 for G.Y.G.)the Hong Kong Global STEM Professorship Scheme (for X.C.Z.)。
文摘Compared to the well-studied two-dimensional(2D)ferroelectricity,the appearance of 2D antiferroelectricity is much rarer,where local dipoles from the nonequivalent sublattices within 2D monolayers are oppositely oriented.Using NbOCl_(2) monolayer with competing ferroelectric(FE)and antiferroelectric(AFE)phases as a 2D material platform,we demonstrate the emergence of intrinsic antiferroelectricity in NbOCl_(2) monolayer under experimentally accessible shear strain,along with new functionality associated with electric field-induced AFE-to-FE phase transition.Specifically,the complex configuration space accommodating FE and AFE phases,polarization switching kinetics,and finite temperature thermodynamic properties of 2D NbOCl_(2) are all accurately predicted by large-scale molecular dynamics simulations based on deep learning interatomic potential model.Moreover,room temperature stable antiferroelectricity with low polarization switching barrier and one-dimensional collinear polarization arrangement is predicted in shear-deformed NbOCl_(2) monolayer.The transition from AFE to FE phase in 2D NbOCl_(2) can be triggered by a low critical electric field,leading to a double polarization–electric(P–E)loop with small hysteresis.A new type of optoelectronic device composed of AFE-NbOCl_(2) is proposed,enabling electric“writing”and nonlinear optical“reading”logical operation with fast operation speed and low power consumption.
基金Supported by the PetroChina Science and Technology Major Project(2016E-0101).
文摘The kinetic parameters of hydrocarbon generation are determined through experimental simulation and mathematical calculation using four typical samples selected from the Cretaceous Nenjiang Formation in the northwest of Songliao Basin,Chang 7 Member of Triassic Yanchang Formation in the southwest of Ordos Basin,Paleogene in the southwest of Qaidam Basin,and Lucaogou Formation of Jimusar Sag in the east of Junggar Basin.The results show that activation energy of hydrocarbon generation of organic matter is closely related to maturity and mainly ranges between 197 kJ/mol and 227 kJ/mol.On this basis,the temperature required for organic matter in shale to convert into oil was calculated.The ideal heating temperature is between 270℃and 300℃,and the conversation rate can reach 90%after 50-300 days of heating at constant temperature.When the temperature rises at a constant rate,the temperature corresponding to the major hydrocarbon generation period ranges from 225 to 350℃at the temperature rise rate of 1-150℃/month.In order to obtain higher economic benefits,it is suggested to adopt higher temperature rise rate(60-150℃/month).The more reliable kinetic parameters obtained can provide a basis for designing more reasonable scheme of in-situ heating conversion.
文摘Numerical simulation of diode-pumped Q-switched Nd:YAG laser leading to the generation of eye-safe signal in singly resonant Intracavity Optical Parametric Oscillator (IOPO) is presented. Starting from rate equations, the time dependent laser equations have been solved numerically, whereas the space-dependent OPO equations analytically. Our results show that 1.4 J diode laser (810 nm) pulse with 200 msec width, delivers 30 mJ Nd:YAG laser (1064 nm) pulse with 5 n-second width. This Nd:YAG laser further generates 9 mJ eye safe signal (1570 nm) pulse with 2.5 n-second width.
基金Supported by the National Key Projects for Fundamental Research and Development of China(2016YFB0600904)
文摘Large quantities of blast furnace(BF) slag and CO_2 are discharged annually from iron and steel industries, along with a large amount of waste heat.The mineral carbonation of BF slag can not only reduce emissions of solid waste but also realize the in-situ fixation of CO_2 with low energy consumption if integrated with the waste heat utilization.In this study, based on our previous works, Aspen Plus was employed to simulate and optimize the carbonation process and integrate the process energy.The effects of gehlenite extraction, MgSO_4 carbonation,and aluminum ammonium sulfate crystallization were studied systematically.The simulation results demonstrate that 2.57 kg of BF slag can sequester 1 kg of CO_2, requiring 5.34 MJ of energy(3.3 MJ heat and 2.04 MJ electricity), and this energy includes the capture of CO_2 from industrial flue gases.Approximately 60 kg net CO_2 emission reduction could be achieved for the disposal of one ton of BF slag.In addition, the by-product,aluminum ammonium sulfate, is a high value-added product.Preliminary economic analysis indicates that the profit for the whole process is 1127 CNY per ton of BF slag processed.
文摘Reliability of power systems is a key aspect in modern power system planning, design, and operation. The ascendance of the smart grid concept has provided high hopes of developing an intelligent network that is capable of being a self-healing grid, offering the ability to overcome the interruption problems that face the utility and cost it tens of millions in repair and loss. In this work, we develop a MATLAB code to examine the effect of the smart grid applications in improving the reliability of the power distribution networks via Monte Carlo Simulation approach. The system used in this paper is the IEEE 34 test feeder. The objective is to measure the installations of the Automatic Reclosers (ARs) as well as the Distributed Generators (DGs) on the reliability indices, SAIDI, SAIFI, CAIDI and EUE, and make comparisons with results from a previous study done by the authors using another approach. The MATLAB code should provide close results to the output of the previous research to verify its effectiveness.
文摘The temperature dependence of the density of states in strong magnetic fields. On the basis of the model constructed, a computer program calculating the density of electronic states in a quantizing magnetic field. Used new, based on quantum statistics, the approach to the calculation of the temperature dependence of the density of states in a strong magnetic field. Mathematical modeling of the density of states using the experimental values of a continuous density of states makes it possible to calculate the Landau levels.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
基金supported by the Key Laboratory of Failure Mechanism and Safety Control Techniques of Earth-rock Dams of the Ministry of Water Resources(Grant No.YK914019)the CRSRI Open Research Program(Grant No.CKWV2016376/KY)the National Natural Science Foundation of China(Grant No.51009055)
文摘Based on the damage constitutive model for concrete, the Weibull distribution function was used to characterize the random distribution of the mechanical properties of materials by finely subdividing concrete slab elements, and a concrete random mesoscopic damage model was established. The seismic response of a 100-m high concrete face rockfill dam(CFRD), subjected to ground motion with different intensities, was simulated with the three-dimensional finite element method(FEM), with emphasis on exploration of damage and the cracking process of concrete slabs during earthquakes as well as analysis of dynamic damage and cracking characteristics during strong earthquakes. The calculated results show that the number of damaged and cracking elements on concrete slabs grows with the duration of earthquakes. With increasing earthquake intensity, the damaged zone and cracking zone on concrete slabs grow wider. During a 7.0-magnitude earthquake, the stress level of concrete slabs is low for the CFRD, and there is almost no damage or slight damage to the slabs. While during a 9.0-magnitude strong earthquake, the percentages of damaged elements and macrocracking elements continuously ascend with the duration of the earthquake, peaking at approximately 26% and 5% at the end of the earthquake, respectively. The concrete random mesoscopic damage model can depict the entire process of sprouting, growing, connecting, and expanding of cracks on a concrete slab during earthquakes.
文摘The present work relates to a numerical investigation of double diffusive mixed convection around a horizontal annulus with a finned inner cylinder.The solutal and thermal buoyancy forces are sustained by maintaining the inner and outer cylinders at uniform temperatures and concentrations.Buoyancy effects are also considered,with the Boussinesq approximation.The forced convection effect is induced by the outer cylinder rotating with an angular velocity(ω)in an anti-clockwise direction.The studies are made for various combinations of dimensionless numbers;buoyancy ratio number(N),Lewis number(Le),Richardson number(Ri)and Grashof number(Gr).The isotherms,isoconcentrations and streamlines as well as both average and local Nusselt and Sherwood numbers were studied.A finite volume scheme is adopted to solve the transport equations for continuity,momentum,energy and mass transfer.The results indicate that the use of fins on the inner cylinder with outer cylinder rotation,significantly improves the heat and mass transfer in the annulus.
文摘This paper posits that we are living in a computer simulation to simulate physical reality which has the same computer simulation process as virtual reality (computer-simulated reality). The computer simulation process involves the digital representation of data, the mathematical computation of the digitized data in geometric formation and transformation in space-time, and the selective retention of events in a narrative. Conventional physics cannot explain physical reality clearly, while computer-simulated physics can explain physical reality clearly by using the computer simulation process consisting of the digital representation component, the mathematical computation component, and the selective retention component. For the digital representation component, the three intrinsic data (properties) are rest mass-kinetic energy, electric charge, and spin which are represented by the digital space structure, the digital spin, and the digital electric charge, respectively. The digital representations of rest mass and kinetic energy are 1 as attachment space for the space of matter and 0 as detachment space for the zero-space of matter, respectively, to explain the Higgs field, the reverse Higgs field, quantum mechanics, special relativity, force fields, dark matter, and baryonic matter. The digital representations of the exclusive and the inclusive occupations of positions are 1/2 spin fermion and integer spin boson, respectively, to explain spatial translation by supersymmetry transformation and dark energy. The digital representations of the allowance and the disallowance of irreversible kinetic energy are integral electric charges and fractional electric charges, respectively, to explain the confinements of quarks and quasiparticles. For the mathematical computation component, the mathematical computation involves the reversible multiverse and oscillating M-theory as oscillating membrane-string-particle whose space-time dimension (D) number oscillates between 11D and 10D and between 10D and 4D to explain cosmology. For the selective retention component, gravity, the strong force, electromagnetism, and the weak force are the retained events during the reversible four-stage evolution of our universe, and are unified by the common narrative of the evolution.
基金supported by the 2024 Research Fund of University of Ulsan.
文摘In recent years,three-dimensional reconstruction technologies that employ multiple cameras have continued to evolve significantly,enabling remote collaboration among users in extended Reality(XR)environments.In addition,methods for deploying multiple cameras for motion capture of users(e.g.,performers)are widely used in computer graphics.As the need to minimize and optimize the number of cameras grows to reduce costs,various technologies and research approaches focused on Optimal Camera Placement(OCP)are continually being proposed.However,as most existing studies assume homogeneous camera setups,there is a growing demand for studies on heterogeneous camera setups.For instance,technical demands keep emerging in scenarios with minimal camera configurations,especially regarding cost factors,the physical placement of cameras given the spatial structure,and image capture strategies for heterogeneous cameras,such as high-resolution RGB cameras and depth cameras.In this study,we propose a pre-visualization and simulation method for the optimal placement of heterogeneous cameras in XR environments,accounting for both the specifications of heterogeneous cameras(e.g.,field of view)and the physical configuration(e.g.,wall configuration)in real-world spaces.The proposed method performs a visibility analysis of cameras by considering each camera’s field-of-view volume,resolution,and unique characteristics,along with physicalspace constraints.This approach enables the optimal position and rotation of each camera to be recommended,along with the minimum number of cameras required.In the results of our study conducted in heterogeneous camera combinations,the proposed method achieved 81.7%~82.7%coverage of the target visual information using only 2~3 cameras.In contrast,single(or homogeneous)-typed cameras were required to use 11 cameras for 81.6%coverage.Accordingly,we found that camera deployment resources can be reduced with the proposed approaches.
文摘Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.
文摘BACKGROUND Orthopaedic surgical education has traditionally depended on the apprenticeship model of“see one,do one,teach one”.However,reduced operative exposure,stricter work-hour regulations,medicolegal constraints,and patient safety concerns have constrained its practicality.Simulation-based training has become a reliable,safe,and cost-efficient alternative.Dry lab techniques,especially virtual and augmented reality,make up 78%of current dry lab research,whereas wet labs still set the standard for anatomical realism.AIM To evaluate the effectiveness,limitations,and future directions of wet and dry lab simulation in orthopaedic training.METHODS A scoping review was carried out across four databases-PubMed,Cochrane Library,Web of Science,and EBSCOhost-up to 2025.Medical Subject Headings included:"Orthopaedic Education","Wet Lab","Dry Lab","Simulation Training","Virtual Reality",and"Surgical Procedure".Eligible studies focused on orthopaedic or spinal surgical education,employed wet or dry lab techniques,and assessed training effectiveness.Exclusion criteria consisted of non-English publications,abstracts only,non-orthopaedic research,and studies unrelated to simulation.Two reviewers independently screened titles,abstracts,and full texts,resolving discrepancies with a third reviewer.RESULTS From 1851 records,101 studies met inclusion:78 on dry labs,7 on wet labs,4 on both.Virtual reality(VR)simulations were most common,with AI increasingly used for feedback and assessment.Cadaveric training remains the gold standard for accuracy and tactile feedback,while dry labs-especially VR-offer scalability,lower cost(40%-60%savings in five studies),and accessibility for novices.Senior residents prefer wet labs for complex tasks;juniors favour dry labs for basics.Challenges include limited transferability data,lack of standard outcome metrics,and ethical concerns about cadaver use and AI assessment.CONCLUSION Wet and dry labs each have unique strengths in orthopaedic training.A hybrid approach combining both,supported by standardised assessments and outcome studies,is most effective.Future efforts should aim for uniform reporting,integrating new technologies,and policy support for hybrid curricula to enhance skills and patient care.
