A siliconizing process to manufacture 6.5% Si steel sheet has been developed. Electric components, such as transformers and reactors are made easily from 6.5% Si steel sheet. However, improved workability is desirable...A siliconizing process to manufacture 6.5% Si steel sheet has been developed. Electric components, such as transformers and reactors are made easily from 6.5% Si steel sheet. However, improved workability is desirable to increase the applications. Therefore the improvement of workability of 6.5% Si steel sheet was investigated, and the results were obtained as follows: (a) workability of 6.5% Si steel sheet is deteriorated by grain boundary oxidization, (b) grain boundary oxidization can be restrained by the addition of C. Workability and magnetic properties of 6.5% Si steel sheet with C addition are discussed. Furthermore, it was found that the workability of high Si steel sheet was improved remarkably by varying the Si content gradient along the thickness without deterioration of high frequency magnetic properties. This newly developed magnetic gradient high Si steel sheet is also discussed.展开更多
Silicon stands as a key anode material in lithium-ion battery ascribing to its high energy density.Nevertheless,the poor rate performance and limited cycling life remain unresolved through conventional approaches that...Silicon stands as a key anode material in lithium-ion battery ascribing to its high energy density.Nevertheless,the poor rate performance and limited cycling life remain unresolved through conventional approaches that involve carbon composites or nanostructures,primarily due to the un-controllable effects arising from the substantial formation of a solid electrolyte interphase(SEI)during the cycling.Here,an ultra-thin and homogeneous Ti doping alumina oxide catalytic interface is meticulously applied on the porous Si through a synergistic etching and hydrolysis process.This defect-rich oxide interface promotes a selective adsorption of fluoroethylene carbonate,leading to a catalytic reaction that can be aptly described as“molecular concentration-in situ conversion”.The resultant inorganic-rich SEI layer is electrochemical stable and favors ion-transport,particularly at high-rate cycling and high temperature.The robustly shielded porous Si,with a large surface area,achieves a high initial Coulombic efficiency of 84.7%and delivers exceptional high-rate performance at 25 A g^(−1)(692 mAh g^(−1))and a high Coulombic efficiency of 99.7%over 1000 cycles.The robust SEI constructed through a precious catalytic layer promises significant advantages for the fast development of silicon-based anode in fast-charging batteries.展开更多
Silicon nanowires(SiNWs)have been used in a wide variety of applications over the past few decades due to their excellent material properties.The only drawback is the high production cost of SiNWs.The preparation of S...Silicon nanowires(SiNWs)have been used in a wide variety of applications over the past few decades due to their excellent material properties.The only drawback is the high production cost of SiNWs.The preparation of SiNWs from photovoltaic waste silicon(WSi)powders,which are high-volume industrial wastes,not only avoids the secondary energy consumption and environmental pollution caused by complicated recycling methods,but also realizes its high-value utilization.Herein,we present a method to rapidly convert photovoltaic WSi powders into SiNWs products.The flash heating and quenching provided by carbothermal shock induce the production of free silicon atoms from the WSi powders,which are rapidly reorganized and assembled into SiNWs during the vapor-phase process.This method allows for the one-step composite of SiNWs and carbon cloth(CC)and the formation of SiC at the interface of the silicon(Si)and carbon(C)contact to create a stable chemical connection.The obtained SiNWs-CC(SiNWs@CC)composites can be directly used as lithium anodes,exhibiting high initial coulombic efficiency(86.4%)and stable cycling specific capacity(2437.4 mA h g^(-1)at 0.5 A g^(-1)after 165 cycles).In addition,various SiNWs@C composite electrodes are easily prepared using this method.展开更多
To address the increasing demand for massive data storage and processing,brain-inspired neuromorphic comput-ing systems based on artificial synaptic devices have been actively developed in recent years.Among the vario...To address the increasing demand for massive data storage and processing,brain-inspired neuromorphic comput-ing systems based on artificial synaptic devices have been actively developed in recent years.Among the various materials inves-tigated for the fabrication of synaptic devices,silicon carbide(SiC)has emerged as a preferred choices due to its high electron mobility,superior thermal conductivity,and excellent thermal stability,which exhibits promising potential for neuromorphic applications in harsh environments.In this review,the recent progress in SiC-based synaptic devices is summarized.Firstly,an in-depth discussion is conducted regarding the categories,working mechanisms,and structural designs of these devices.Subse-quently,several application scenarios for SiC-based synaptic devices are presented.Finally,a few perspectives and directions for their future development are outlined.展开更多
Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes...Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes during repeated charge–discharge cycles. In this work, a “soft-hard”double-layer coating has been proposed and carried out on ball-milled silicon particles. It is composed of inside conductive pathway and outside elastic coating, which is achieved by decomposing a conductive graphite layer on the silicon surface and further coating it with a polymer layer.The incorporation of the second elastic coating on the inside carbon coating enables silicon particles strongly interacted with binders, thereby making the electrodes displaying an obviously improved cycling stability. As-obtained double-coated silicon anodes deliver a reversible capacity of 2280 m Ah g^(-1)at the voltage of 0.05–2 V, and maintains over 1763 mAh g^(-1)after 50 cycles. The double-layer coating does not crack after the repeated cycling, critical for the robust performance of the electrodes. In addition, as-obtained silicon particles are mixed with commercial graphite to make actual anodes for lithium-ion batteries. A capacity of 714 mAh g^(-1)has been achieved based on the total mass of the electrodes containing 10 wt.% double-coated silicon particles. Compared with traditional carbon coating or polymeric coating, the double-coating electrodes display a much better performance. Therefore, the double-coating strategy can give inspiration for better design and synthesis of silicon anodes, as well as other battery materials.展开更多
[4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid(Me-4PACz)self-assembled monolayer(SAM)as the hole transport materials have been demonstrated remarkable potential in perovskite solar cells(PSCs).However,the hyd...[4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid(Me-4PACz)self-assembled monolayer(SAM)as the hole transport materials have been demonstrated remarkable potential in perovskite solar cells(PSCs).However,the hydrophobicity of Me-4PACz presents a critical challenge for the fabrication of high-quality perovskite films due to its poor wettability.Here,a doped Al_(2)O_(3)with Me-4PACz to modify the Me-4PACz surface was proposed.On one hand,this approach improved the wettability of the Me-4PACz film,enhancing the coverage,uniformity,and buried interface properties of the perovskite film.On the other hand,compared to Al_(2)O_(3)modification alone,doping Al_(2)O_(3)with Me-4PACz allowed direct contact between the perovskite and Me-4PACz,resulting in better buried interface passivation.As a result,we achieved an efficiency of 22.71%for single-junction wide-bandgap perovskite solar cells(1.68 eV).Additionally,the efficiency of perovskite/silicon tandem solar cells was improved from 28.68%to 30.92%,with a significant reduction in hysteresis.Furthermore,the tandem cells demonstrated no degradation after 4200 s of operation at the maximum power point.展开更多
Silicone rubber(SR)is a versatile material widely used across various advanced functional applications,such as soft actuators and robots,flexible electronics,and medical devices.However,most SR molding methods rely on...Silicone rubber(SR)is a versatile material widely used across various advanced functional applications,such as soft actuators and robots,flexible electronics,and medical devices.However,most SR molding methods rely on traditional thermal processing or direct ink writing three-dimensional(3D)printing.These methods are not conducive to manufacturing complex structures and present challenges such as time inefficiency,poor accuracy,and the necessity of multiple steps,significantly limiting SR applications.In this study,we developed an SR-based ink suitable for vat photopolymerization 3D printing using a multi-thiol monomer.This ink enables the one-step fabrication of complex architectures with high printing resolution at the micrometer scale,providing excellent mechanical strength and superior chemical stability.Specifically,the optimized 3D printing SR-20 exhibits a tensile stress of 1.96 MPa,an elongation at break of 487.9%,and an elastic modulus of 225.4 kPa.Additionally,the 3D-printed SR samples can withstand various solvents(acetone,toluene,and tetrahydrofuran)and endure temperatures ranging from-50℃ to 180℃,demonstrating superior stability.As a emonstration of the application,we successfully fabricated a series of SR-based soft pneumatic actuators and grippers in a single step with this technology,allowing for free assembly for the first time.This ultraviolet-curable SR,with high printing resolution and exceptional stability performance,has significant potential to enhance the capabilities of 3D printing for applications in soft actuators,robotics,flexible electronics,and medical devices.展开更多
Solar energy, as a renewable resource, is an effective solution to the current global energy shortage problem. To actively respond to the call for "carbon peak" and "carbon neutrality", solar cell ...Solar energy, as a renewable resource, is an effective solution to the current global energy shortage problem. To actively respond to the call for "carbon peak" and "carbon neutrality", solar cell industry has experienced unprecedented development. The full utilization of solar energy resources remains an urgent issue to be addressed.展开更多
Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the...Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically calculated.The effect of precipitate ripening on the Goss texture and magnetic property was investigated.Data indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate increased.Secondary recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}<227>oriented grains growing abnormally and a magnetic induction intensity of 1.90T.Furthermore,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss texture.However,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 T.At a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this study.The heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.展开更多
【Objectives】Si and microbial application could relieve the crop replanting problems(CRPs).We further studied the change of key microorganisms that are related to the beneficial effects,aiming at provide reference fo...【Objectives】Si and microbial application could relieve the crop replanting problems(CRPs).We further studied the change of key microorganisms that are related to the beneficial effects,aiming at provide reference for the manufacture and application of both microbial agents and Si fertilizer in food lily production.【Methods】A field experiment was conducted over a three-year period,from March 2019 to March 2022.The experimental field had been continuously cultivated with lily for 9 years.Three treatments were established:silicon fertilizer(SF),microbial agents(“Special 8^(TM)”,MF),and combined application of silicon fertilizer and microbial agents(SMF).A control group with blank soil(CK)was also included.At seedling stage of Lanzhou lilies in 2020 and 2021,the shoot and bulb dry weight,and the plant height and stem diameter of Lanzhou lilies were investigated for calculation of seedling index.In July 2020,20 plants were selected in each plot,and root zone soils were sampled at a depth of 20 cm,10 cm away from the roots,and then mixed to form a composite sample.The soil available Si and organic matter content were analyzed,and the fungal community structure and some specific microbial groups in soils were determined with high-throughput sequencing of ITS.【Results】All the three treatments significantly enhanced the lily plant growth and the seedling index,compared to CK.Besides,SF and MF treatments increased the relative abundances(RA)and diversity of fungal communities,and altered the community structures.The RA of some specific groups were found to be significantly correlated with the seedling index and/or soil available Si.Of them,the RA of the genera Fusarium,Dactylonectria,Humicola,Stilbella,and the species Humicola_grisea showed a positive correlation,while that of the genera Mortierella,Stilbella,Holtermanniella,and the species Mortierella_fatshederae showed a negative correlation with seedling index.The genera Fusarium,Stilbella,the species Humicola_grisea,and Dactylonectria_estremocensis showed a positive correlation,while the genura Stilbella,and the species Mortierella fatshederae showed a negative correlation with available Si content.In the co-occurence network of top twenty fungal genera and top sixteen bacterial genera(RA>0.2%),Holtermanniella was the only genus that interacted with the bacteria and negatively correlated with bacterial genus Blastococcus.Holtermanniella was also the most densely connected genera,followed by the genus Fusarium,Didymella and Humicola.In addition,the genus Holtermanniella was the key species connecting fungal and bacterial community in soil.Fungal functional prediction revealed that SF,MF and SMF treatments decreased plant pathogens guilds and increased the beneficial guilds Ectomycorrhizal,plant saprophyte,leaf saprophyte,and arbuscular mycorrhizal compared to CK.【Conclusions】Combined application of silicon fertilizer and microbial agents can alleviate continuous replanting problems of Lanzhou lilies through restoring the fungal community diversity,and promoting plant residue depredation,thus reducing soil born disease incidence.The beneficial genus Humicola and its one species H.grisea acts as bioconversion,and the genus Acremonium acts as plant pathogen inhibitor.展开更多
Semiconductors and related fields today hold vast application prospects.The semiconductor wafer fabrication process involves steps such as substrate preparation and epitaxy,which occur in high-temperature corrosive en...Semiconductors and related fields today hold vast application prospects.The semiconductor wafer fabrication process involves steps such as substrate preparation and epitaxy,which occur in high-temperature corrosive environments.Consequently,components like crucibles,susceptors and wafer carriers require carbon-based materials such as graphite and carbon-carbon composites.However,traditional carbon materials underperform in these extreme conditions,failing to effectively address the challenges.This leads to issues including product contamination and shortened equipment lifespan.Therefore,effective protection of carbon materials is crucial.This paper reviews current research status on the preparation methods and properties of corrosion-resistant coatings within relevant domestic and international fields.Preparation methods include various techniques such as physical vapor deposition(PVD),chemical vapor deposition(CVD)and the sol-gel method.Furthermore,it offers perspectives on future research directions for corrosion-resistant coated components in semiconductor equipment.These include exploring novel coating materials,improving coating preparation processes,enhancing coating corrosion resistance,as well as further investigating the interfacial interactions between coatings and carbon substrates to achieve better adhesion and compatibility.展开更多
Cu suffers from oxidation and corrosion during application due to its active chemical properties.Graphene⁃modified Cu can significantly improve its stability during application.However,copper is easily sintered at hig...Cu suffers from oxidation and corrosion during application due to its active chemical properties.Graphene⁃modified Cu can significantly improve its stability during application.However,copper is easily sintered at high temperatures,so that graphene cannot be grown inside.We demonstrate two kinds of spacers,graphite and SiO_(2),which are effective in preventing the sintering of copper and are used to assist in the growth of graphene.In the Cu⁃C system,the nucleation of graphene is scarce,and it tends to nucleate and grow on the concave surface of copper first,and then grow epitaxially to the convex surface of copper.Eventually,the obtained graphene is relatively thick.In the Cu⁃SiO_(2) system,due to the oxygen released by SiO_(2) at high temperatures,the surface of copper becomes rough.This leads to an increase in the number of graphene nucleation sites without preferred orientation,and relatively thin graphene is obtained.Two different growth mechanisms have been established for spacerseffects on graphene growth.It provides insights for graphene engineering for further applications.展开更多
The emergence of cesium lead halide perovskite materials stable at air opened new prospects for the optoelectronic industry.In this work we present an approach to fabricating a flexible green perovskite light-emitting...The emergence of cesium lead halide perovskite materials stable at air opened new prospects for the optoelectronic industry.In this work we present an approach to fabricating a flexible green perovskite light-emitting electrochemical cell(PeLEC)with a CsPbBr_(3)perovskite active layer using a highly-ordered silicon nanowire(Si NW)array as a distributed electrode integrated within a thin polydimethylsiloxane film(PDMS).Numerical simulations reveal that Si NWs-based distributed electrode aids the improvement of carrier injection into the perovskite layer with an increased thickness and,therefore,the enhancement of light-emitting performance.The X-ray diffraction study shows that the perovskite layer synthesized on the PDMS membrane with Si NWs has a similar crystal structure to the ones synthesized on planar Si wafers.We perform a comparative analysis of the light-emitting devices’properties fabricated on rigid silicon substrates and flexible Si NW-based membranes released from substrates.Due to possible potential barriers in a flexible PeLEC between the bottom electrode(made of a network of single-walled carbon nanotube film)and Si NWs,the electroluminescence performance and Ⅰ-V properties of flexible devices deteriorated compared to rigid devices.The developed PeLECs pave the way for further development of inorganic flexible uniformly light-emitting devices with improved properties.展开更多
Soft electronics,which are designed to function under mechanical deformation(such as bending,stretching,and folding),have become essential in applications like wearable electronics,artificial skin,and brain-machine in...Soft electronics,which are designed to function under mechanical deformation(such as bending,stretching,and folding),have become essential in applications like wearable electronics,artificial skin,and brain-machine interfaces.Crystalline silicon is one of the most mature and reliable materials for high-performance electronics;however,its intrinsic brittleness and rigidity pose challenges for integrating it into soft electronics.Recent research has focused on overcoming these limitations by utilizing structural design techniques to impart flexibility and stretchability to Si-based materials,such as transforming them into thin nanomembranes or nanowires.This review summarizes key strategies in geometry engineering for integrating crystalline silicon into soft electronics,from the use of hard silicon islands to creating out-of-plane foldable silicon nanofilms on flexible substrates,and ultimately to shaping silicon nanowires using vapor-liquid-solid or in-plane solid-liquid-solid techniques.We explore the latest developments in Si-based soft electronic devices,with applications in sensors,nanoprobes,robotics,and brain-machine interfaces.Finally,the paper discusses the current challenges in the field and outlines future research directions to enable the widespread adoption of silicon-based flexible electronics.展开更多
Coastal wetlands face dual pressures from high salinity and heavy metal pollution,presenting significant ecological challenges.Halophytes like Sesuvium portulacastrum possess unique physiological mechanisms to mitigat...Coastal wetlands face dual pressures from high salinity and heavy metal pollution,presenting significant ecological challenges.Halophytes like Sesuvium portulacastrum possess unique physiological mechanisms to mitigate metal toxicity.This study investigates how silicon (Si) availability influences the accumulation of copper (Cu) and cadmium (Cd) in S.portulacastrum.Our results show that Si supplementation at environmentally relevant levels significantly increases Cu and Cd concentrations in the roots,while simultaneously reducing the root-to-shoot translocation of these metals.In situ non-invasive micro-testing revealed decreased metal efflux from the xylem,indicating an enhanced retention of metals in the roots.Furthermore,analyses using X-ray photoelectron spectroscopy and atomic force microscopy demonstrated a higher density of oxygen-containing functional groups and SiO-on the extracellular matrix of Si-enriched roots.This structural transformation resulted in a significant reduction in root surface potential,facilitating greater metal ion attraction and uptake.The findings from this study provide critical insights into the mechanisms by which Si availability regulates metal accumulation in halophytes,suggesting potential strategies for mitigating metal pollution in coastal wetland ecosystems.展开更多
Silicon,a leading candidate for electrode material for lithium-ion batteries,has garnered significant attention.During the initial lithiation process,the alloying reaction between silicon and lithium transforms the pr...Silicon,a leading candidate for electrode material for lithium-ion batteries,has garnered significant attention.During the initial lithiation process,the alloying reaction between silicon and lithium transforms the pristine silicon microstructure from crystalline to amorphous,resulting in plastic deformation of the amorphous phase.This study proposes the free volume theory to develop a fully coupled Cahn-Hilliard phase-field model that integrates viscoplastic deformation,free volume evolution,and diffusion.This model investigates the chemophysical phenomenon of self-limiting behavior occurring during the initial lithiation of silicon anodes.Unlike most existing models,the proposed model considers free volume-dependent diffusion using a physically-based approach.The model’s temporal variation in the lithiated phase thickness aligns well with experimental results,confirming the model’s accuracy.Stress field calculations reveal the coexistence of compressive and tensile stresses within the lithiated phase,which may not cause the limiting effect under the frame of the stress-induced diffusion.Analyses indicate that high effective stress increases free volume,enhancing lithium diffusion and augmenting the diffusion coefficient.Reducing the diffusion coefficient in the lithiated phase due to free volume evolution is the primary cause of self-limiting lithiation.展开更多
Increasing nitrogen and phosphorus discharge and decreasing sediment input have made silicon(Si)a limiting element for diatoms in estuaries.Disturbances in nutrient structure and salinity fluctuation can greatly affec...Increasing nitrogen and phosphorus discharge and decreasing sediment input have made silicon(Si)a limiting element for diatoms in estuaries.Disturbances in nutrient structure and salinity fluctuation can greatly affect metal uptake by estuarine diatoms.However,the combined effects of Si and salinity on metal accumulation in these diatoms have not been evaluated.In this study,we aimed to investigate how salinity and Si availability combine to influence the adsorption of metals by a widely distributed diatom Phaeodactylum tricornutum.Our data indicate that replete Si and low salinity in seawater can enhance cadmium and copper adsorption onto the diatom surface.At the single-cell level,surface potential was a dominant factor determining metal adsorption,while surface roughness also contributed to the highermetal loading capacity at lower salinities.Using a combination of noninvasive micro-test technology,atomic force microscopy,X-ray photoelectron spectroscopy,and Fourier transform infrared spectroscopy,we demonstrate that the diversity and abundance of the functional groups embedded in diatom cell walls vary with salinity and Si supply.This results in a change in the cell surface potential and transient metal influx.Our study provides novel mechanisms to explain the highly variable metal adsorption capacity of a model estuarine diatom.展开更多
Ultra-thin crystalline silicon stands as a cornerstone material in the foundation of modern micro and nano electronics.Despite the proliferation of various materials including oxide-based,polymer-based,carbon-based,an...Ultra-thin crystalline silicon stands as a cornerstone material in the foundation of modern micro and nano electronics.Despite the proliferation of various materials including oxide-based,polymer-based,carbon-based,and two-dimensional(2D)materials,crystal silicon continues to maintain its stronghold,owing to its superior functionality,scalability,stability,reliability,and uniformity.Nonetheless,the inherent rigidity of the bulk silicon leads to incompatibility with soft tissues,hindering the utilization amid biomedical applications.Because of such issues,decades of research have enabled successful utilization of various techniques to precisely control the thickness and morphology of silicon layers at the scale of several nanometres.This review provides a comprehensive exploration on the features of ultra-thin single crystalline silicon as a semiconducting material,and its role especially among the frontier of advanced bioelectronics.Key processes that enable the transition of rigid silicon to flexible form factors are exhibited,in accordance with their chronological sequence.The inspected stages span both prior and subsequent to transferring the silicon membrane,categorized respectively as on-wafer manufacturing and rigid-to-soft integration.Extensive guidelines to unlock the full potential of flexible electronics are provided through ordered analysis of each manufacturing procedure,the latest findings of biomedical applications,along with practical perspectives for researchers and manufacturers.展开更多
[2-(3,4-epoxy-cyclohexyl)ethyl]dimethyltert-butylsilane was synthesized,using tert-butyldimethylsilane(TBDMS)and 1,2-epoxy-4-vinylcyclohexane(EVC)as the main raw materials and tris(triphenylphosphine)chlororhodium(I)[...[2-(3,4-epoxy-cyclohexyl)ethyl]dimethyltert-butylsilane was synthesized,using tert-butyldimethylsilane(TBDMS)and 1,2-epoxy-4-vinylcyclohexane(EVC)as the main raw materials and tris(triphenylphosphine)chlororhodium(I)[RhCl(Ph3P)3]as the catalyst.[2-(3,4-epoxy-cyclohexyl)ethyl]dimethyltert-butylsilane is a novel kind of silicon-containing epoxide.The factors affecting the reaction yield,such as catalyst use,reaction time and reaction temperature,were investigated,and the synthesized product was characterized and analyzed by FT-IR and 1H-NMR.A series of amine-curing resins were prepared with[2-(3,4-epoxy-cyclohexyl)ethyl]dimethyltert-butylsilane,bisphenol A epoxy resin(E-51)and modified amine(593 amine).The mechanical properties of cured splines with the different proportions of amine-curing resins were tested.When the content of 593 amine was 20%,the content of E-51 was 75%and the amount of[2-(3,4-epoxy-cyclohexyl)ethyl]dimethyltert-butylsilane was 5%,the mechanical properties of the cured splines were the best with the tensile strength being 23.3 MPa,the elongation at break being 7.8%,and the Young's modulus being 421.3 MPa.展开更多
In pursuit of meeting the demands for the next generation of high energy density and flexible electronic products,there is a growing interest in flexible energy storage devices.Silicon(Si)stands out as a promising ele...In pursuit of meeting the demands for the next generation of high energy density and flexible electronic products,there is a growing interest in flexible energy storage devices.Silicon(Si)stands out as a promising electrode material due to its high theoretical specific capacity(~3579 mA h g^(-1)),low lithiation potential(~0.40 V),and abundance in nature.We have successfully developed freestanding and flexible CNT/Si/low-melting-point metal(LM)electrodes,which obviate the need for conductive additives,adhesives,and thereby increase the energy density of the device.As an anode material for lithium-ion batteries(LIBs),the CNT/Si/LM electrode demonstrates remarkable cycling stability and rate performance,achieving a reversible capacity of 1871.8 mA h g^(-1)after 100 cycles at a current density of 0.2 A g^(-1).In-situ XRD and in-situ thickness analysis are employed to elucidate the underlying mechanisms during the lithiation/delithiation.Density functional theory(DFT)calculations further substantiate the mechanism by which LM enhances the electrochemical performance of Si,focusing on the aspects of stress mitigation and reduction of the diffusion energy barrier.This research introduces a novel approach to flexible electrode design by integrating CNT films,LM,and Si,thereby charting a path forward for the development of next-generation flexible LIBs.展开更多
文摘A siliconizing process to manufacture 6.5% Si steel sheet has been developed. Electric components, such as transformers and reactors are made easily from 6.5% Si steel sheet. However, improved workability is desirable to increase the applications. Therefore the improvement of workability of 6.5% Si steel sheet was investigated, and the results were obtained as follows: (a) workability of 6.5% Si steel sheet is deteriorated by grain boundary oxidization, (b) grain boundary oxidization can be restrained by the addition of C. Workability and magnetic properties of 6.5% Si steel sheet with C addition are discussed. Furthermore, it was found that the workability of high Si steel sheet was improved remarkably by varying the Si content gradient along the thickness without deterioration of high frequency magnetic properties. This newly developed magnetic gradient high Si steel sheet is also discussed.
基金the National Key R&D Plan of the Ministry of Science and Technology of China(2022YFE0122400)National Natural Science Foundation of China(52002238,22102207)+1 种基金Science and Technology Commission of Shanghai Municipality(22ZR1423800,21ZR1465200,23ZR1423600)Shanghai Municipal Education Commission and the NSRF via the Program Management Unit for Human Resources&Institutional Development,Research and Innovation(B49G680115).
文摘Silicon stands as a key anode material in lithium-ion battery ascribing to its high energy density.Nevertheless,the poor rate performance and limited cycling life remain unresolved through conventional approaches that involve carbon composites or nanostructures,primarily due to the un-controllable effects arising from the substantial formation of a solid electrolyte interphase(SEI)during the cycling.Here,an ultra-thin and homogeneous Ti doping alumina oxide catalytic interface is meticulously applied on the porous Si through a synergistic etching and hydrolysis process.This defect-rich oxide interface promotes a selective adsorption of fluoroethylene carbonate,leading to a catalytic reaction that can be aptly described as“molecular concentration-in situ conversion”.The resultant inorganic-rich SEI layer is electrochemical stable and favors ion-transport,particularly at high-rate cycling and high temperature.The robustly shielded porous Si,with a large surface area,achieves a high initial Coulombic efficiency of 84.7%and delivers exceptional high-rate performance at 25 A g^(−1)(692 mAh g^(−1))and a high Coulombic efficiency of 99.7%over 1000 cycles.The robust SEI constructed through a precious catalytic layer promises significant advantages for the fast development of silicon-based anode in fast-charging batteries.
基金partially funded by the National Natural Science Foundation of China(52074255,52274412)。
文摘Silicon nanowires(SiNWs)have been used in a wide variety of applications over the past few decades due to their excellent material properties.The only drawback is the high production cost of SiNWs.The preparation of SiNWs from photovoltaic waste silicon(WSi)powders,which are high-volume industrial wastes,not only avoids the secondary energy consumption and environmental pollution caused by complicated recycling methods,but also realizes its high-value utilization.Herein,we present a method to rapidly convert photovoltaic WSi powders into SiNWs products.The flash heating and quenching provided by carbothermal shock induce the production of free silicon atoms from the WSi powders,which are rapidly reorganized and assembled into SiNWs during the vapor-phase process.This method allows for the one-step composite of SiNWs and carbon cloth(CC)and the formation of SiC at the interface of the silicon(Si)and carbon(C)contact to create a stable chemical connection.The obtained SiNWs-CC(SiNWs@CC)composites can be directly used as lithium anodes,exhibiting high initial coulombic efficiency(86.4%)and stable cycling specific capacity(2437.4 mA h g^(-1)at 0.5 A g^(-1)after 165 cycles).In addition,various SiNWs@C composite electrodes are easily prepared using this method.
基金supported by the Natural Science Foundation of Zhejiang Province(Grant No.LQ24F040007)the National Natural Science Foundation of China(Grant No.U22A2075)the Opening Project of State Key Laboratory of Polymer Materials Engineering(Sichuan University)(Grant No.sklpme2024-1-21).
文摘To address the increasing demand for massive data storage and processing,brain-inspired neuromorphic comput-ing systems based on artificial synaptic devices have been actively developed in recent years.Among the various materials inves-tigated for the fabrication of synaptic devices,silicon carbide(SiC)has emerged as a preferred choices due to its high electron mobility,superior thermal conductivity,and excellent thermal stability,which exhibits promising potential for neuromorphic applications in harsh environments.In this review,the recent progress in SiC-based synaptic devices is summarized.Firstly,an in-depth discussion is conducted regarding the categories,working mechanisms,and structural designs of these devices.Subse-quently,several application scenarios for SiC-based synaptic devices are presented.Finally,a few perspectives and directions for their future development are outlined.
基金supported by the National Natural Science Foundation of China (No. 22008256)。
文摘Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes during repeated charge–discharge cycles. In this work, a “soft-hard”double-layer coating has been proposed and carried out on ball-milled silicon particles. It is composed of inside conductive pathway and outside elastic coating, which is achieved by decomposing a conductive graphite layer on the silicon surface and further coating it with a polymer layer.The incorporation of the second elastic coating on the inside carbon coating enables silicon particles strongly interacted with binders, thereby making the electrodes displaying an obviously improved cycling stability. As-obtained double-coated silicon anodes deliver a reversible capacity of 2280 m Ah g^(-1)at the voltage of 0.05–2 V, and maintains over 1763 mAh g^(-1)after 50 cycles. The double-layer coating does not crack after the repeated cycling, critical for the robust performance of the electrodes. In addition, as-obtained silicon particles are mixed with commercial graphite to make actual anodes for lithium-ion batteries. A capacity of 714 mAh g^(-1)has been achieved based on the total mass of the electrodes containing 10 wt.% double-coated silicon particles. Compared with traditional carbon coating or polymeric coating, the double-coating electrodes display a much better performance. Therefore, the double-coating strategy can give inspiration for better design and synthesis of silicon anodes, as well as other battery materials.
基金supported by the National Key Research and Development Program of China(2023YFB4202503)the cooperation project between Three Gorges Corporation and Nankai University(202103571)+6 种基金the National Natural Science Foundation Joint Fund(U21A2072)the National Science Foundation(62274099,62104115)Tianjin Science and Technology Project(24ZXZSSS00160)Yunnan Provincial Science and Technology Project at Southwest United Graduate School(202302A0370009)the China Higher Education Discipline Innovation Overseas Expert Introduction Project(B16027)the Haihe Laboratory of Sustainable Chemical Transformationsthe Fundamental Research Funds for the Central Universities,Nankai University。
文摘[4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid(Me-4PACz)self-assembled monolayer(SAM)as the hole transport materials have been demonstrated remarkable potential in perovskite solar cells(PSCs).However,the hydrophobicity of Me-4PACz presents a critical challenge for the fabrication of high-quality perovskite films due to its poor wettability.Here,a doped Al_(2)O_(3)with Me-4PACz to modify the Me-4PACz surface was proposed.On one hand,this approach improved the wettability of the Me-4PACz film,enhancing the coverage,uniformity,and buried interface properties of the perovskite film.On the other hand,compared to Al_(2)O_(3)modification alone,doping Al_(2)O_(3)with Me-4PACz allowed direct contact between the perovskite and Me-4PACz,resulting in better buried interface passivation.As a result,we achieved an efficiency of 22.71%for single-junction wide-bandgap perovskite solar cells(1.68 eV).Additionally,the efficiency of perovskite/silicon tandem solar cells was improved from 28.68%to 30.92%,with a significant reduction in hysteresis.Furthermore,the tandem cells demonstrated no degradation after 4200 s of operation at the maximum power point.
基金supported by the Strategic Priority Program of the Chinese Academy of Sciences(XDB0470303)the National Key R&D Program of China(2022YFB4600102and 2023YFE0209900)+4 种基金the National Natural Science Foundation of China(52175201 and 51935012)the science and technology projects of Gansu province(22JR5RA093,24JRRA044,24YFFA014 and 24ZDGA014)the Innovation and Entrepreneurship Team Project of YEDA(2021TD007)the special supporting project for provincial leading talents of Yantaithe Taishan Scholars Program。
文摘Silicone rubber(SR)is a versatile material widely used across various advanced functional applications,such as soft actuators and robots,flexible electronics,and medical devices.However,most SR molding methods rely on traditional thermal processing or direct ink writing three-dimensional(3D)printing.These methods are not conducive to manufacturing complex structures and present challenges such as time inefficiency,poor accuracy,and the necessity of multiple steps,significantly limiting SR applications.In this study,we developed an SR-based ink suitable for vat photopolymerization 3D printing using a multi-thiol monomer.This ink enables the one-step fabrication of complex architectures with high printing resolution at the micrometer scale,providing excellent mechanical strength and superior chemical stability.Specifically,the optimized 3D printing SR-20 exhibits a tensile stress of 1.96 MPa,an elongation at break of 487.9%,and an elastic modulus of 225.4 kPa.Additionally,the 3D-printed SR samples can withstand various solvents(acetone,toluene,and tetrahydrofuran)and endure temperatures ranging from-50℃ to 180℃,demonstrating superior stability.As a emonstration of the application,we successfully fabricated a series of SR-based soft pneumatic actuators and grippers in a single step with this technology,allowing for free assembly for the first time.This ultraviolet-curable SR,with high printing resolution and exceptional stability performance,has significant potential to enhance the capabilities of 3D printing for applications in soft actuators,robotics,flexible electronics,and medical devices.
文摘Solar energy, as a renewable resource, is an effective solution to the current global energy shortage problem. To actively respond to the call for "carbon peak" and "carbon neutrality", solar cell industry has experienced unprecedented development. The full utilization of solar energy resources remains an urgent issue to be addressed.
文摘Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically calculated.The effect of precipitate ripening on the Goss texture and magnetic property was investigated.Data indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate increased.Secondary recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}<227>oriented grains growing abnormally and a magnetic induction intensity of 1.90T.Furthermore,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss texture.However,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 T.At a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this study.The heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.
基金Key Research project of Gansu Province of China(22YF7NA108)National Natural Science Foundation of China(31860549)+1 种基金Industry Supporting Project from Education Department of Gansu Province(2023CYZC-49)Major Science and Technology project of Gansu province(24ZDNA006)。
文摘【Objectives】Si and microbial application could relieve the crop replanting problems(CRPs).We further studied the change of key microorganisms that are related to the beneficial effects,aiming at provide reference for the manufacture and application of both microbial agents and Si fertilizer in food lily production.【Methods】A field experiment was conducted over a three-year period,from March 2019 to March 2022.The experimental field had been continuously cultivated with lily for 9 years.Three treatments were established:silicon fertilizer(SF),microbial agents(“Special 8^(TM)”,MF),and combined application of silicon fertilizer and microbial agents(SMF).A control group with blank soil(CK)was also included.At seedling stage of Lanzhou lilies in 2020 and 2021,the shoot and bulb dry weight,and the plant height and stem diameter of Lanzhou lilies were investigated for calculation of seedling index.In July 2020,20 plants were selected in each plot,and root zone soils were sampled at a depth of 20 cm,10 cm away from the roots,and then mixed to form a composite sample.The soil available Si and organic matter content were analyzed,and the fungal community structure and some specific microbial groups in soils were determined with high-throughput sequencing of ITS.【Results】All the three treatments significantly enhanced the lily plant growth and the seedling index,compared to CK.Besides,SF and MF treatments increased the relative abundances(RA)and diversity of fungal communities,and altered the community structures.The RA of some specific groups were found to be significantly correlated with the seedling index and/or soil available Si.Of them,the RA of the genera Fusarium,Dactylonectria,Humicola,Stilbella,and the species Humicola_grisea showed a positive correlation,while that of the genera Mortierella,Stilbella,Holtermanniella,and the species Mortierella_fatshederae showed a negative correlation with seedling index.The genera Fusarium,Stilbella,the species Humicola_grisea,and Dactylonectria_estremocensis showed a positive correlation,while the genura Stilbella,and the species Mortierella fatshederae showed a negative correlation with available Si content.In the co-occurence network of top twenty fungal genera and top sixteen bacterial genera(RA>0.2%),Holtermanniella was the only genus that interacted with the bacteria and negatively correlated with bacterial genus Blastococcus.Holtermanniella was also the most densely connected genera,followed by the genus Fusarium,Didymella and Humicola.In addition,the genus Holtermanniella was the key species connecting fungal and bacterial community in soil.Fungal functional prediction revealed that SF,MF and SMF treatments decreased plant pathogens guilds and increased the beneficial guilds Ectomycorrhizal,plant saprophyte,leaf saprophyte,and arbuscular mycorrhizal compared to CK.【Conclusions】Combined application of silicon fertilizer and microbial agents can alleviate continuous replanting problems of Lanzhou lilies through restoring the fungal community diversity,and promoting plant residue depredation,thus reducing soil born disease incidence.The beneficial genus Humicola and its one species H.grisea acts as bioconversion,and the genus Acremonium acts as plant pathogen inhibitor.
基金National Natural Science Foundation of China(12002196,12102140)。
文摘Semiconductors and related fields today hold vast application prospects.The semiconductor wafer fabrication process involves steps such as substrate preparation and epitaxy,which occur in high-temperature corrosive environments.Consequently,components like crucibles,susceptors and wafer carriers require carbon-based materials such as graphite and carbon-carbon composites.However,traditional carbon materials underperform in these extreme conditions,failing to effectively address the challenges.This leads to issues including product contamination and shortened equipment lifespan.Therefore,effective protection of carbon materials is crucial.This paper reviews current research status on the preparation methods and properties of corrosion-resistant coatings within relevant domestic and international fields.Preparation methods include various techniques such as physical vapor deposition(PVD),chemical vapor deposition(CVD)and the sol-gel method.Furthermore,it offers perspectives on future research directions for corrosion-resistant coated components in semiconductor equipment.These include exploring novel coating materials,improving coating preparation processes,enhancing coating corrosion resistance,as well as further investigating the interfacial interactions between coatings and carbon substrates to achieve better adhesion and compatibility.
文摘Cu suffers from oxidation and corrosion during application due to its active chemical properties.Graphene⁃modified Cu can significantly improve its stability during application.However,copper is easily sintered at high temperatures,so that graphene cannot be grown inside.We demonstrate two kinds of spacers,graphite and SiO_(2),which are effective in preventing the sintering of copper and are used to assist in the growth of graphene.In the Cu⁃C system,the nucleation of graphene is scarce,and it tends to nucleate and grow on the concave surface of copper first,and then grow epitaxially to the convex surface of copper.Eventually,the obtained graphene is relatively thick.In the Cu⁃SiO_(2) system,due to the oxygen released by SiO_(2) at high temperatures,the surface of copper becomes rough.This leads to an increase in the number of graphene nucleation sites without preferred orientation,and relatively thin graphene is obtained.Two different growth mechanisms have been established for spacerseffects on graphene growth.It provides insights for graphene engineering for further applications.
基金the Russian Science Foundation Project No.22-79-10286,https://rscf.ru/project/22-7910286/(synthesis of perovskites, PeLEC fabrication)the Russian Science Foundation Project No.23-79-01151 for NW/PDMS membrane fabrication and PeLEC characterization+1 种基金the Ministry of Science and Higher Education of the Russian Federation (Project. FZSR-2020-0007 within the framework of state task no. 075-03-2020-097/1) for the support of SWCNT synthesisthe Ministry of Science and Higher Education of the Russian Federation (Project FSRM-2022-0007) for NW fabrication
文摘The emergence of cesium lead halide perovskite materials stable at air opened new prospects for the optoelectronic industry.In this work we present an approach to fabricating a flexible green perovskite light-emitting electrochemical cell(PeLEC)with a CsPbBr_(3)perovskite active layer using a highly-ordered silicon nanowire(Si NW)array as a distributed electrode integrated within a thin polydimethylsiloxane film(PDMS).Numerical simulations reveal that Si NWs-based distributed electrode aids the improvement of carrier injection into the perovskite layer with an increased thickness and,therefore,the enhancement of light-emitting performance.The X-ray diffraction study shows that the perovskite layer synthesized on the PDMS membrane with Si NWs has a similar crystal structure to the ones synthesized on planar Si wafers.We perform a comparative analysis of the light-emitting devices’properties fabricated on rigid silicon substrates and flexible Si NW-based membranes released from substrates.Due to possible potential barriers in a flexible PeLEC between the bottom electrode(made of a network of single-walled carbon nanotube film)and Si NWs,the electroluminescence performance and Ⅰ-V properties of flexible devices deteriorated compared to rigid devices.The developed PeLECs pave the way for further development of inorganic flexible uniformly light-emitting devices with improved properties.
基金the National Natural Science Foundation of China under granted No.62104100National Key Research Program of China under No.92164201+1 种基金National Natural Science Foundation of China for Distinguished Young Scholars under No.62325403National Natural Science Foundation of China under No.61934004.
文摘Soft electronics,which are designed to function under mechanical deformation(such as bending,stretching,and folding),have become essential in applications like wearable electronics,artificial skin,and brain-machine interfaces.Crystalline silicon is one of the most mature and reliable materials for high-performance electronics;however,its intrinsic brittleness and rigidity pose challenges for integrating it into soft electronics.Recent research has focused on overcoming these limitations by utilizing structural design techniques to impart flexibility and stretchability to Si-based materials,such as transforming them into thin nanomembranes or nanowires.This review summarizes key strategies in geometry engineering for integrating crystalline silicon into soft electronics,from the use of hard silicon islands to creating out-of-plane foldable silicon nanofilms on flexible substrates,and ultimately to shaping silicon nanowires using vapor-liquid-solid or in-plane solid-liquid-solid techniques.We explore the latest developments in Si-based soft electronic devices,with applications in sensors,nanoprobes,robotics,and brain-machine interfaces.Finally,the paper discusses the current challenges in the field and outlines future research directions to enable the widespread adoption of silicon-based flexible electronics.
基金supported by the National Natural Science Foundation of China (Nos.42376152 and 42306155)Guangdong Major Project of Basic and Applied Basic Research(No.2023B0303000017)+2 种基金the Special Program of Key Sectors in Guangdong Universities (No.2022ZDZX4040)the Innovation Team Project of Universities in Guangdong Province (No.2023KCXTD028)Guangxi Key Laboratory of Marine Environmental Change and Disaster in Beibu Gulf,Beibu Gulf University (No.2022KF007)。
文摘Coastal wetlands face dual pressures from high salinity and heavy metal pollution,presenting significant ecological challenges.Halophytes like Sesuvium portulacastrum possess unique physiological mechanisms to mitigate metal toxicity.This study investigates how silicon (Si) availability influences the accumulation of copper (Cu) and cadmium (Cd) in S.portulacastrum.Our results show that Si supplementation at environmentally relevant levels significantly increases Cu and Cd concentrations in the roots,while simultaneously reducing the root-to-shoot translocation of these metals.In situ non-invasive micro-testing revealed decreased metal efflux from the xylem,indicating an enhanced retention of metals in the roots.Furthermore,analyses using X-ray photoelectron spectroscopy and atomic force microscopy demonstrated a higher density of oxygen-containing functional groups and SiO-on the extracellular matrix of Si-enriched roots.This structural transformation resulted in a significant reduction in root surface potential,facilitating greater metal ion attraction and uptake.The findings from this study provide critical insights into the mechanisms by which Si availability regulates metal accumulation in halophytes,suggesting potential strategies for mitigating metal pollution in coastal wetland ecosystems.
基金the National Natural Science Foundation of China under grant No.12372173the Natural Science Foundation of Shanghai under grant No.23ZR1468600.
文摘Silicon,a leading candidate for electrode material for lithium-ion batteries,has garnered significant attention.During the initial lithiation process,the alloying reaction between silicon and lithium transforms the pristine silicon microstructure from crystalline to amorphous,resulting in plastic deformation of the amorphous phase.This study proposes the free volume theory to develop a fully coupled Cahn-Hilliard phase-field model that integrates viscoplastic deformation,free volume evolution,and diffusion.This model investigates the chemophysical phenomenon of self-limiting behavior occurring during the initial lithiation of silicon anodes.Unlike most existing models,the proposed model considers free volume-dependent diffusion using a physically-based approach.The model’s temporal variation in the lithiated phase thickness aligns well with experimental results,confirming the model’s accuracy.Stress field calculations reveal the coexistence of compressive and tensile stresses within the lithiated phase,which may not cause the limiting effect under the frame of the stress-induced diffusion.Analyses indicate that high effective stress increases free volume,enhancing lithium diffusion and augmenting the diffusion coefficient.Reducing the diffusion coefficient in the lithiated phase due to free volume evolution is the primary cause of self-limiting lithiation.
基金supported by the National Natural Science Foundation of China (Nos.U23A2048,42376152,41976140,and 42076148)the Special Program of Key Sectors in Guangdong Universities (Nos.2022ZDZX4040 and 2023KCXTD028).
文摘Increasing nitrogen and phosphorus discharge and decreasing sediment input have made silicon(Si)a limiting element for diatoms in estuaries.Disturbances in nutrient structure and salinity fluctuation can greatly affect metal uptake by estuarine diatoms.However,the combined effects of Si and salinity on metal accumulation in these diatoms have not been evaluated.In this study,we aimed to investigate how salinity and Si availability combine to influence the adsorption of metals by a widely distributed diatom Phaeodactylum tricornutum.Our data indicate that replete Si and low salinity in seawater can enhance cadmium and copper adsorption onto the diatom surface.At the single-cell level,surface potential was a dominant factor determining metal adsorption,while surface roughness also contributed to the highermetal loading capacity at lower salinities.Using a combination of noninvasive micro-test technology,atomic force microscopy,X-ray photoelectron spectroscopy,and Fourier transform infrared spectroscopy,we demonstrate that the diversity and abundance of the functional groups embedded in diatom cell walls vary with salinity and Si supply.This results in a change in the cell surface potential and transient metal influx.Our study provides novel mechanisms to explain the highly variable metal adsorption capacity of a model estuarine diatom.
基金support received from National Research Foundation of Korea (NRF) Grant funded by the Korea government (MSIT)(RS-2024-00353768)the National Research Foundation of Korea (NRF) Grant funded by the Korea government (MSIT)(RS-2025-02217919)+1 种基金funded by the Yonsei Fellowshipfunded by Lee Youn Jae and the KIST Institutional Program Project No.2E31603-22-140 (KJY).
文摘Ultra-thin crystalline silicon stands as a cornerstone material in the foundation of modern micro and nano electronics.Despite the proliferation of various materials including oxide-based,polymer-based,carbon-based,and two-dimensional(2D)materials,crystal silicon continues to maintain its stronghold,owing to its superior functionality,scalability,stability,reliability,and uniformity.Nonetheless,the inherent rigidity of the bulk silicon leads to incompatibility with soft tissues,hindering the utilization amid biomedical applications.Because of such issues,decades of research have enabled successful utilization of various techniques to precisely control the thickness and morphology of silicon layers at the scale of several nanometres.This review provides a comprehensive exploration on the features of ultra-thin single crystalline silicon as a semiconducting material,and its role especially among the frontier of advanced bioelectronics.Key processes that enable the transition of rigid silicon to flexible form factors are exhibited,in accordance with their chronological sequence.The inspected stages span both prior and subsequent to transferring the silicon membrane,categorized respectively as on-wafer manufacturing and rigid-to-soft integration.Extensive guidelines to unlock the full potential of flexible electronics are provided through ordered analysis of each manufacturing procedure,the latest findings of biomedical applications,along with practical perspectives for researchers and manufacturers.
基金Funded by the National Natural Science Foundation of China(No.21865017)。
文摘[2-(3,4-epoxy-cyclohexyl)ethyl]dimethyltert-butylsilane was synthesized,using tert-butyldimethylsilane(TBDMS)and 1,2-epoxy-4-vinylcyclohexane(EVC)as the main raw materials and tris(triphenylphosphine)chlororhodium(I)[RhCl(Ph3P)3]as the catalyst.[2-(3,4-epoxy-cyclohexyl)ethyl]dimethyltert-butylsilane is a novel kind of silicon-containing epoxide.The factors affecting the reaction yield,such as catalyst use,reaction time and reaction temperature,were investigated,and the synthesized product was characterized and analyzed by FT-IR and 1H-NMR.A series of amine-curing resins were prepared with[2-(3,4-epoxy-cyclohexyl)ethyl]dimethyltert-butylsilane,bisphenol A epoxy resin(E-51)and modified amine(593 amine).The mechanical properties of cured splines with the different proportions of amine-curing resins were tested.When the content of 593 amine was 20%,the content of E-51 was 75%and the amount of[2-(3,4-epoxy-cyclohexyl)ethyl]dimethyltert-butylsilane was 5%,the mechanical properties of the cured splines were the best with the tensile strength being 23.3 MPa,the elongation at break being 7.8%,and the Young's modulus being 421.3 MPa.
基金the National Natural Science Foundation of China(22279070).
文摘In pursuit of meeting the demands for the next generation of high energy density and flexible electronic products,there is a growing interest in flexible energy storage devices.Silicon(Si)stands out as a promising electrode material due to its high theoretical specific capacity(~3579 mA h g^(-1)),low lithiation potential(~0.40 V),and abundance in nature.We have successfully developed freestanding and flexible CNT/Si/low-melting-point metal(LM)electrodes,which obviate the need for conductive additives,adhesives,and thereby increase the energy density of the device.As an anode material for lithium-ion batteries(LIBs),the CNT/Si/LM electrode demonstrates remarkable cycling stability and rate performance,achieving a reversible capacity of 1871.8 mA h g^(-1)after 100 cycles at a current density of 0.2 A g^(-1).In-situ XRD and in-situ thickness analysis are employed to elucidate the underlying mechanisms during the lithiation/delithiation.Density functional theory(DFT)calculations further substantiate the mechanism by which LM enhances the electrochemical performance of Si,focusing on the aspects of stress mitigation and reduction of the diffusion energy barrier.This research introduces a novel approach to flexible electrode design by integrating CNT films,LM,and Si,thereby charting a path forward for the development of next-generation flexible LIBs.
