As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing pl...As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing planetary habitability and the search for extraterrestrial life.The integrated measurement of N_(2)and argon(Ar)isotopes by using noble gas mass spectrometry represents a state-of-the-art technique for such investigations.To support the growing demands of planetary science research in China,we have developed a high-efficiency,high-precision method for the integrated analysis of N_(2)and Ar isotopes.This was achieved by enhancing gas extraction and purification systems and integrating them with a static noble gas mass spectrometer.This method enables integrated N_(2)-Ar isotope measurements on submilligram samples,significantly improving sample utilization and reducing the impact of sample heterogeneity on volatile analysis.The system integrates CO_(2)laser heating,a modular two-stage Zr-Al getter pump,and a CuO furnace-based purification process,effectively reducing background levels(N_(2)blank as low as 0.35×10^(−6)cubic centimeters at standard temperature and pressure[ccSTP]).Analytical precision is ensured through calibration with atmospheric air and CO corrections.To validate the reliability of the method,we performed N_(2)-Ar isotope analyses on the Allende carbonaceous chondrite,one of the most extensively studied meteorites internationally.The measured N_(2)concentrations range from 19.2 to 29.8 ppm,withδ15N values between−44.8‰and−33.0‰.Concentrations of 40Ar,36Ar,and 38Ar are(12.5-21.1)×10^(−6)ccSTP/g,(90.9-150.3)×10^(−9)ccSTP/g,and(19.2-30.7)×10^(−9)ccSTP/g,respectively.These values correspond to cosmic-ray exposure ages of 4.5-5.7 Ma,consistent with previous reports.Step-heating experiments further reveal distinct release patterns of N and Ar isotopes,as well as their associations with specific mineral phases in the meteorite.In summary,the combined N_(2)-Ar isotopic system offers significant advantages for tracing volatile sources in extraterrestrial materials and will provide essential analytical support for upcoming Chinese planetary missions,such as Tianwen-2.展开更多
Photoelectrochemical(PEC)water splitting holds significant promise for sustainable energy harvesting that enables efficient conversion of solar energy into green hydrogen.Nevertheless,achievement of high performance i...Photoelectrochemical(PEC)water splitting holds significant promise for sustainable energy harvesting that enables efficient conversion of solar energy into green hydrogen.Nevertheless,achievement of high performance is often limited by charge carrier recombination,resulting in unsatisfactory saturation current densities.To address this challenge,we present a novel strategy for achieving ultrahigh current density by incorporating a bridge layer between the Si substrate and the NiOOH cocatalyst in this paper.The optimal photoanode(TCO/n-p-Si/TCO/Ni)shows a remarkably low onset potential of 0.92 V vs.a reversible hydrogen electrode and a high saturation current density of 39.6 mA·cm^(-2),which is about 92.7%of the theoretical maximum(42.7 mA·cm^(-2)).In addition,the photoanode demonstrates stable operation for 60 h.Our systematic characterizations and calculations demonstrate that the bridge layer facilitates charge transfer,enhances catalytic performance,and provides corrosion protection to the underlying substrate.Notably,the integration of this photoanode into a PEC device for overall water splitting leads to a reduction of the onset potential.These findings provide a viable pathway for fabricating highperformance industrial photoelectrodes by integrating a substrate and a cocatalyst via a transparent and conductive bridge layer.展开更多
Industrial data mining usually deals with data from different sources.These heterogeneous datasets describe the same object in different views.However,samples from some of the datasets may be lost.Then the remaining s...Industrial data mining usually deals with data from different sources.These heterogeneous datasets describe the same object in different views.However,samples from some of the datasets may be lost.Then the remaining samples do not correspond one-to-one correctly.Mismatched datasets caused by missing samples make the industrial data unavailable for further machine learning.In order to align the mismatched samples,this article presents a cooperative iteration matching method(CIMM)based on the modified dynamic time warping(DTW).The proposed method regards the sequentially accumulated industrial data as the time series.Mismatched samples are aligned by the DTW.In addition,dynamic constraints are applied to the warping distance of the DTW process to make the alignment more efficient.Then a series of models are trained with the cumulated samples iteratively.Several groups of numerical experiments on different missing patterns and missing locations are designed and analyzed to prove the effectiveness and the applicability of the proposed method.展开更多
As an emerging microscopic detection tool,quantum microscopes based on the principle of quantum precision measurement have attracted widespread attention in recent years.Compared with the imaging of classical light,qu...As an emerging microscopic detection tool,quantum microscopes based on the principle of quantum precision measurement have attracted widespread attention in recent years.Compared with the imaging of classical light,quantum-enhanced imaging can achieve ultra-high resolution,ultra-sensitive detection,and anti-interference imaging.Here,we introduce a quantum-enhanced scanning microscope under illumination of an entangled NOON state in polarization.For the phase imager with NOON states,we propose a simple four-basis projection method to replace the four-step phase-shifting method.We have achieved the phase imaging of micrometer-sized birefringent samples and biological cell specimens,with sensitivity close to the Heisenberg limit.The visibility of transmittance-based imaging shows a great enhancement for NOON states.Besides,we also demonstrate that the scanning imaging with NOON states enables the spatial resolution enhancement of√N compared with classical measurement.Our imaging method may provide some reference for the practical application of quantum imaging and is expected to promote the development of microscopic detection.展开更多
In this paper,an image processing algorithm which is able to synthesize material textures of arbitrary shapes is proposed.The presented approach uses an arbitrary image to construct a structure layer of the material.T...In this paper,an image processing algorithm which is able to synthesize material textures of arbitrary shapes is proposed.The presented approach uses an arbitrary image to construct a structure layer of the material.The resulting structure layer is then used to constrain the material texture synthesis.The field of second-moment matrices is used to represent the structure layer.Many tests with various constraint images are conducted to ensure that the proposed approach accurately reproduces the visual aspects of the input material sample.The results demonstrate that the proposed algorithm is able to accurately synthesize arbitrary-shaped material textures while respecting the local characteristics of the exemplar.This paves the way toward the synthesis of 3D material textures of arbitrary shapes from 2D material samples,which has a wide application range in virtual material design and materials characterization.展开更多
Geological samples often contain significant amounts of iron,which,although not typically the target element,can substantially interfere with the analysis of other elements of interest.To mitigate these interferences,...Geological samples often contain significant amounts of iron,which,although not typically the target element,can substantially interfere with the analysis of other elements of interest.To mitigate these interferences,amidoximebased radiation grafted adsorbents have been identified as effective for iron removal.In this study,an amidoximefunctionalized,radiation-grafted adsorbent synthesized from polypropylene waste(PPw-g-AO-10)was employed to remove iron from leached geological samples.The adsorption process was systematically optimized by investigating the effects of pH,contact time,adsorbent dosage,and initial ferric ion concentration.Under optimal conditions-pH1.4,a contact time of 90 min,and an initial ferric ion concentration of 4500 mg/L-the adsorbent exhibited a maximum iron adsorption capacity of 269.02 mg/g.After optimizing the critical adsorption parameters,the adsorbent was applied to the leached geological samples,achieving a 91%removal of the iron content.The adsorbent was regenerated through two consecutive cycles using 0.2 N HNO_(3),achieving a regeneration efficiency of 65%.These findings confirm the efficacy of the synthesized PPw-g-AO-10 as a cost-effective and eco-friendly adsorbent for successfully removing iron from leached geological matrices while maintaining a reasonable degree of reusability.展开更多
A lifespan prediction model was developed based on a few samples to provide decision-making information for operation and maintenance,as well as improve the economy and safety of nuclear power plant(NPP)operations.Thi...A lifespan prediction model was developed based on a few samples to provide decision-making information for operation and maintenance,as well as improve the economy and safety of nuclear power plant(NPP)operations.This paper applies a Weibull model to forecast the lifespan of electronic cards with a few samples in NPPs.Relationship between the lifespan prediction of electronic cards and the ambient temperature is revealed using the Arrhenius equation.Censored samples are used to compensate for the lack of fault electronic card data.Scale parameter and shape parameter of the Weibull model are optimized by adjusting the weight ratio between the censored data and the fault data.Characteristic life is then obtained using the rank regression fitting equation.Parameters of the Arrhenius equation can be calculated by dividing the samples into groups according to the ambient temperature.A case study of the intermediate range high-voltage electric card of ex-core neutron detectors demonstrates that the lifespan prediction of electronic cards in NPPs can be successfully predicted with a few samples by combining the Weibull model and the Arrhenius model.This can help provide preventive maintenance recommendations for electronic cards.Finally,operation suggestions for the electronic card’s ambient temperature can be made by utilizing the temperature-life model.展开更多
When the 2025 Intertextile Apparel Fabrics Exhibition(Autumn/Winter)was held in Shanghai,more than 3,700 top exhibitors from 26 countries and regions around the world participated.From September 2nd to 4th,the 2025&qu...When the 2025 Intertextile Apparel Fabrics Exhibition(Autumn/Winter)was held in Shanghai,more than 3,700 top exhibitors from 26 countries and regions around the world participated.From September 2nd to 4th,the 2025"Keqiao Selected"exhibition shone brightly at the event,showcasing the high-end quality of its products and the innovative strength of its regional brands.展开更多
The investigation of whether sediment samples contain representative grain size distribution information is important for the accurate extraction of sediment characteristics and conduct of related sedimentary record s...The investigation of whether sediment samples contain representative grain size distribution information is important for the accurate extraction of sediment characteristics and conduct of related sedimentary record studies.This study comparatively analyzed the numerical and qualitative differences and the degree of correlation of 36 sets of the characteristic parameters of surface sediment parallel sample grain size distribution from three sampling profiles at Jinsha Bay Beach in Zhanjiang,western Guangdong.At each sampling point,five parallel subsamples were established at intervals of 0,10,20,50,and 100 cm along the coastline.The research findings indicate the following:1)relatively large differences in the mean values of the different parallel samples(0.19–0.34Φ),with smaller differences observed in other characteristic grain sizes(D_(10),D_(50),and D_(90));2)small differences in characteristic values among various parallel sample grain size parameters,with at least 33%of the combinations of qualitative results showing inconsistency;3)50%of the regression equations between the skewness of different parallel samples displaying no significant correlation;4)relative deviations of−47.91%to 27.63%and−49.20%to 2.08%existing between the particle size parameters of a single sample and parallel samples(with the average obtained)at intervals of 10 and 50 cm,respectively.As such,small spatial differences,even within 100 cm,can considerably affect grain size parameters.Given the uncertain reasons underlying the representativeness of the samples,which may only cover the area immediately surrounding the sampling station,researchers are advised to design parallel sample collection strategies based on the spatiotemporal distribution characteristics of the parameters of interest during sediment sample collection.This study provides a typical case of the comparative analysis of parallel sample grain size parameters,with a focus on small spatial beach sediment,which contributes to the enhanced understanding of the accuracy and reliability of sediment sample collection strategies and extraction of grain size information.展开更多
The exploration of asteroids has received increasing attention since the 1990s because of the unique information these objects contain about the history of the early solar system.Quasi-satellites are a population of a...The exploration of asteroids has received increasing attention since the 1990s because of the unique information these objects contain about the history of the early solar system.Quasi-satellites are a population of asteroids that co-orbit closely with,but are outside the gravitational control of,the planet.So far,only five Earth quasi-satellites have been recognized,among which(469219)Kamo’oalewa(provisionally designated as 2016 HO3)is currently considered the most stable and the closest of these.However,little is known about this particular asteroid or this class of near-Earth asteroids because of the difficulties of observing them.China has announced that Tianwen-2,the asteroid sample-return mission to Kamo’oalewa,will be launched in 2025.Here,we review the current knowledge of Kamo’oalewa in terms of its physical characteristics,dynamic evolution,surface environment,and origin,and we propose possible breakthroughs that the samples could bring concerning the asteroid Kamo’oalewa as an Earth quasi-satellite.Confirming the origin of Kamo’oalewa,from its prevailing provenance as debris of the Moon,could be a promising start to inferring the evolutionary history of the Moon.This history would probably include a more comprehensive view of the lunar farside and the origin of the asymmetry between the two sides of the Moon.Comparing the samples from the Moon and Kamo’oalewa would also provide new insights into the Earth wind.展开更多
Three-dimensional printing(3DP)offers valuable insight into the characterization of natural rocks and the verification of theoretical models due to its high reproducibility and accurate replication of complex defects ...Three-dimensional printing(3DP)offers valuable insight into the characterization of natural rocks and the verification of theoretical models due to its high reproducibility and accurate replication of complex defects such as cracks and pores.In this study,3DP gypsum samples with different printing directions were subjected to a series of uniaxial compression tests with in situ micro-computed tomography(micro-CT)scanning to quantitatively investigate their mechanical anisotropic properties and damage evolution characteristics.Based on the two-dimensional(2D)CT images obtained at different scanning steps,a novel void ratio variable was derived using the mean value and variance of CT intensity.Additionally,a constitutive model was formulated incorporating the proposed damage variable,utilizing the void ratio variable.The crack evolution and crack morphology of 3DP gypsum samples were obtained and analyzed using the 3D models reconstructed from the CT images.The results indicate that 3DP gypsum samples exhibit mechanical anisotropic characteristics similar to those found in naturally sedimentary rocks.The mechanical anisotropy is attributed to the bedding planes formed between adjacent layers and pillar-like structures along the printing direction formed by CaSO_(4)·2H_(2)O crystals of needle-like morphology.The mean gray intensity of the voids has a positive linear relationship with the threshold value,while the CT variance and void ratio have concave and convex relationships,respectively.The constitutive model can effectively match the stress–strain curves obtained from uniaxial compression experiments.This study provides comprehensive explanations of the failure modes and anisotropic mechanisms of 3DP gypsum samples,which is important for characterizing and understanding the failure mechanism and microstructural evolution of 3DP rocks when modeling natural rock behavior.展开更多
[Objective] This study aimed to compare the residue situation of cimaterol,a kind of forbidden veterinary drug in hair, urine and flesh of pig, so as to provide theoretical basis for monitoring veterinary drug residue...[Objective] This study aimed to compare the residue situation of cimaterol,a kind of forbidden veterinary drug in hair, urine and flesh of pig, so as to provide theoretical basis for monitoring veterinary drug residue in bred animals. [Method]Total three different concentrations of cimaterol were administered to pigs, and the residue amounts of cimaterol in pig hair, urine and flesh were monitored at different raising stage. [Result] During the administration period, the residue amount of cimaterol was highest in urine, so urine is the suitable sample for rapid detection of cimaterol in manufacturing enterprises. Cimaterol could be accumulated in pig hair,where cimaterol was metabolized slowly. Thus, pig hair can be used as the test sample for tracing illegal use of veterinary drugs and for vivo detection. Flesh can be used as test sample for direct judgment whether cimaterol residue exceeds the relevant standard. [Conclusion] This study will provide certain theoretical basis for drug monitor in animal husbandry.展开更多
Abstract Industrial robots are used for automatic drilling and riveting. The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly, and can be improved through er...Abstract Industrial robots are used for automatic drilling and riveting. The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly, and can be improved through error compensation to meet aircraft assembly requirements. The achiev- able accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points. Therefore, based on the error similarity error compensation method, a method for choosing sampling points on a uniform grid is proposed. A simulation is conducted to analyze the influence of the sample point locations on error compensation. In addition, the grid steps of the sampling points are optimized using a statistical analysis method. The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot. The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid. After error compensation, the position accuracy of the robot meels the position accuracy require- ments.展开更多
Oxide interference correction plays a vital role in the accurate determination of trace element compositions of geological samples by inductively coupled plasma-mass spectrometry(ICP-MS).In this study,we found that th...Oxide interference correction plays a vital role in the accurate determination of trace element compositions of geological samples by inductively coupled plasma-mass spectrometry(ICP-MS).In this study,we found that the oxide production is mainly controlled by the gas flow of the ICP-MS and a constant oxide correction factor(OCF)can be measured during a routine analysis.Thus,we can obtain the oxide production by just investigating the gas flow for a fixed ICP-MS system with monitoring of OCF.Si,Ba and LREE oxide interferences on the Sc,Eu and Gd of four geological standard samples GSP-2,JP-1,GBW03112 and GBW03113 were corrected by such method and the results were in good agreement with the recommended values.Therefore,the present study provides a simple and fast correction method for the oxide interferences of the geological samples during the routine analyses.Furthermore,a Microsoft Excel spreadsheet template integrating the correction equations was developed in an in-house software(ICPMSData Cal)for effective calibration.展开更多
During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envel...During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.展开更多
The adsorption of iodine onto silica coated magnetite nanoparticles(im-SCMNPs) that modified with imidazole was investigated for removal of high concentrations of iodine from wastewater. Modified silica magnetite nano...The adsorption of iodine onto silica coated magnetite nanoparticles(im-SCMNPs) that modified with imidazole was investigated for removal of high concentrations of iodine from wastewater. Modified silica magnetite nanoparticles showed high efficiency in removing iodine from wastewater samples. The optimum pH for iodine removal was 7.0-8.0. The adsorption capacity was evaluated using both the Langmuir and Freundlich adsorption isotherm models. The size of the produced magnetite nanoparticles was determined by X-ray diffraction analysis and scanning electron microscopy. Synthesized magnetite nanoparticles showed the high adsorption capacity and would be a good method to increase adsorption efficiency for the removal of iodine in a wastewater treatment process. The Langmuir adsorption capacity(qmax) was found to be 140.84 mg/g of the adsorbent.展开更多
Geochemical subsoil data obtained from China and European laboratories have been compared in this study. 787 C horizon subsoil samples from FOREGS （Forum of European Geological Surveys） geochemical baselines mapping...Geochemical subsoil data obtained from China and European laboratories have been compared in this study. 787 C horizon subsoil samples from FOREGS （Forum of European Geological Surveys） geochemical baselines mapping project were sent to China＇s IGGE （Institute of Geophysical and Geochemical Exploration） laboratory and composited to 190 samples according to the 160 kin x 160 km GNT （Global Terrestrial Network） cells. In addition to the FOREGS elemental analysis package, Au, Pt, Pd, B, Ge, Br, CI, Se, N, Li and F were also analyzed by using the IGGE＇s 76 element analytical scheme. Geochemical data statistics, scatter plotting, and geochemical map compilation tech- niques have been employed to investigate differences between FOREGS and IGGE analytical results. The results of two datasets, the IGGE＇s analysis data for composited samples, and the FOREGS average data of samples in each GNT cell, agree extremely well lor about 23 elements, viz： SiO2, St, Al2O3, Zr, Ba, Fe2O3, Ti, Rb, Mn, Gd, CaO, Ga, MgO, P, Pb, Na2O, Y, Th, As, U Sc, Cr, and Co. There are slight differences between-laboratory biases shown as proportional errors between the datasets for Ni, K2O, Tb, Tl, Cu, S, Sin, La, Ce, Pr, Nd, Eu, Ho, Er, Tin, Yb, Lu, Ta, Nb, HE and Dy. For Cd, Cs, Be, Sb, In, Mo, I, Sn, and Te, the correlation of the two datasets and the similarity of the geochemical maps are fairly good, but obvious biases exist between the two datasets at values near detection limits.展开更多
In data-driven fault diagnosis for turbo-generator sets,the fault samples are usually expensive to obtain,and inevitably with noise,which will both lead to an unsatisfying identification performance of diagnosis model...In data-driven fault diagnosis for turbo-generator sets,the fault samples are usually expensive to obtain,and inevitably with noise,which will both lead to an unsatisfying identification performance of diagnosis models.To address these issues,this paper proposes a fault diagnosis model for turbo-generator sets based on Weighted Extension Neural Network(W-ENN).WENN is a novel neural network which has three types of connection weights and an improved correlation function.The performance of the proposed model is validated against Extension Neural Network(ENN),Support Vector Machine(SVM),Relevance Vector Machine(RVM)and Extreme Learning Machine(ELM)based models.The results indicate that,on noisy small sample sets,the proposed model is superior to the other models in terms of higher identification accuracy with fewer samples and strong noise-tolerant ability.The findings of this study may serve as a powerful fault diagnosis model for turbo-generator sets on noisy small sample sets.展开更多
The solvation structure of Li^(+) in chemical prelithiation reagent plays a key role in improving the low initial Coulombic efficiency(ICE) and poor cycle performance of silicon-based materials. Never theless, the che...The solvation structure of Li^(+) in chemical prelithiation reagent plays a key role in improving the low initial Coulombic efficiency(ICE) and poor cycle performance of silicon-based materials. Never theless, the chemical prelithiation agent is difficult to dope active Li^(+) in silicon-based anodes because of their low working voltage and sluggish Li^(+) diffusion rate. By selecting the lithium–arene complex reagent with 4-methylbiphenyl as an anion ligand and 2-methyltetrahydrofuran as a solvent, the as-prepared micro-sized Si O/C anode can achieve an ICE of nearly 100%. Interestingly, the best prelithium efficiency does not correspond to the lowest redox half-potential(E_(1/2)), and the prelithiation efficiency is determined by the specific influencing factors(E_(1/2), Li^(+) concentration, desolvation energy, and ion diffusion path). In addition, molecular dynamics simulations demonstrate that the ideal prelithiation efficiency can be achieved by choosing appropriate anion ligand and solvent to regulate the solvation structure of Li^(+). Furthermore, the positive effect of prelithiation on cycle performance has been verified by using an in-situ electrochemical dilatometry and solid electrolyte interphase film characterizations.展开更多
A novel method for the determination of five carbamate pesticides （metolcarb, carbofuran, carbaryl, isoprocard and diethofencard） in water samples was developed by dispersive liquid-liquid microextraction （DLLME） ...A novel method for the determination of five carbamate pesticides （metolcarb, carbofuran, carbaryl, isoprocard and diethofencard） in water samples was developed by dispersive liquid-liquid microextraction （DLLME） coupled with high performance liquid chromatography-diode array detector （HPLC-DAD）. Some experimental parameters that influence the extraction efficiency were studied and optimized to obtain the best extraction results. Under the optimum conditions for the method, the calibration curve was linear in the concentration range from 5 to 1000 ng mL^-1 for all the five carbamate pesticides, with the correlation coefficients （r^2） varying from 0.9984 to 0.9994. Good enrichment factors were achieved ranging from 80 to 177- fold, depending on the compound. The limits of detection （LODs） （S/N = 3） were ranged from 0.1 to 0.5 ng mL^-1. The method has been successfully applied to the analysis of the pesticide residues in environmental water samples.展开更多
基金supported by the Bureau of Frontier Sciences and Basic Research,Chinese Academy of Sciences(Grant No.QYJ-2025-0103)the National Natural Science Foundation of China(Grant Nos.42441834,42241105,42441825,and 42203048)the Key Research Program of the Institute of Geology and Geophysics,Chinese Academy of Sciences(Grant No.IGGCAS-202401).
文摘As one of the major volatile components in extraterrestrial materials,nitrogen(N_(2))isotopes serve not only as tracers for the formation and evolution of the solar system,but also play a critical role in assessing planetary habitability and the search for extraterrestrial life.The integrated measurement of N_(2)and argon(Ar)isotopes by using noble gas mass spectrometry represents a state-of-the-art technique for such investigations.To support the growing demands of planetary science research in China,we have developed a high-efficiency,high-precision method for the integrated analysis of N_(2)and Ar isotopes.This was achieved by enhancing gas extraction and purification systems and integrating them with a static noble gas mass spectrometer.This method enables integrated N_(2)-Ar isotope measurements on submilligram samples,significantly improving sample utilization and reducing the impact of sample heterogeneity on volatile analysis.The system integrates CO_(2)laser heating,a modular two-stage Zr-Al getter pump,and a CuO furnace-based purification process,effectively reducing background levels(N_(2)blank as low as 0.35×10^(−6)cubic centimeters at standard temperature and pressure[ccSTP]).Analytical precision is ensured through calibration with atmospheric air and CO corrections.To validate the reliability of the method,we performed N_(2)-Ar isotope analyses on the Allende carbonaceous chondrite,one of the most extensively studied meteorites internationally.The measured N_(2)concentrations range from 19.2 to 29.8 ppm,withδ15N values between−44.8‰and−33.0‰.Concentrations of 40Ar,36Ar,and 38Ar are(12.5-21.1)×10^(−6)ccSTP/g,(90.9-150.3)×10^(−9)ccSTP/g,and(19.2-30.7)×10^(−9)ccSTP/g,respectively.These values correspond to cosmic-ray exposure ages of 4.5-5.7 Ma,consistent with previous reports.Step-heating experiments further reveal distinct release patterns of N and Ar isotopes,as well as their associations with specific mineral phases in the meteorite.In summary,the combined N_(2)-Ar isotopic system offers significant advantages for tracing volatile sources in extraterrestrial materials and will provide essential analytical support for upcoming Chinese planetary missions,such as Tianwen-2.
基金supported by Multi-Year Research Grants from the University of Macao(MYRG-GRG2023-00010-IAPME,MYRG-GRG2024-00038-IAPME,MYRG2022-00026-IAPME)the Science and Technology Development Fund(FDCT)from Macao SAR(0023/2023/AFJ,0050/2023/RIB2,006/2022/ALC,0087/2024/AFJ,0111/2022/A2).
文摘Photoelectrochemical(PEC)water splitting holds significant promise for sustainable energy harvesting that enables efficient conversion of solar energy into green hydrogen.Nevertheless,achievement of high performance is often limited by charge carrier recombination,resulting in unsatisfactory saturation current densities.To address this challenge,we present a novel strategy for achieving ultrahigh current density by incorporating a bridge layer between the Si substrate and the NiOOH cocatalyst in this paper.The optimal photoanode(TCO/n-p-Si/TCO/Ni)shows a remarkably low onset potential of 0.92 V vs.a reversible hydrogen electrode and a high saturation current density of 39.6 mA·cm^(-2),which is about 92.7%of the theoretical maximum(42.7 mA·cm^(-2)).In addition,the photoanode demonstrates stable operation for 60 h.Our systematic characterizations and calculations demonstrate that the bridge layer facilitates charge transfer,enhances catalytic performance,and provides corrosion protection to the underlying substrate.Notably,the integration of this photoanode into a PEC device for overall water splitting leads to a reduction of the onset potential.These findings provide a viable pathway for fabricating highperformance industrial photoelectrodes by integrating a substrate and a cocatalyst via a transparent and conductive bridge layer.
基金the Key National Natural Science Foundation of China(No.U1864211)the National Natural Science Foundation of China(No.11772191)the Natural Science Foundation of Shanghai(No.21ZR1431500)。
文摘Industrial data mining usually deals with data from different sources.These heterogeneous datasets describe the same object in different views.However,samples from some of the datasets may be lost.Then the remaining samples do not correspond one-to-one correctly.Mismatched datasets caused by missing samples make the industrial data unavailable for further machine learning.In order to align the mismatched samples,this article presents a cooperative iteration matching method(CIMM)based on the modified dynamic time warping(DTW).The proposed method regards the sequentially accumulated industrial data as the time series.Mismatched samples are aligned by the DTW.In addition,dynamic constraints are applied to the warping distance of the DTW process to make the alignment more efficient.Then a series of models are trained with the cumulated samples iteratively.Several groups of numerical experiments on different missing patterns and missing locations are designed and analyzed to prove the effectiveness and the applicability of the proposed method.
基金supported by he National Natural Science Foundation of China(Grant Nos.12304359,12304398,12404382,12234009,12274215,and 12427808)the China Postdoctoral Science Foundation(Grant No.2023M731611)+4 种基金the Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2023ZB717)Innovation Program for Quantum Science and Technology(Grant No.2021ZD0301400)Key R&D Program of Jiangsu Province(Grant No.BE2023002)Natural Science Foundation of Jiangsu Province(Grant Nos.BK20220759 and BK20233001)Program for Innovative Talents and Entrepreneurs in Jiangsu,and Key R&D Program of Guangdong Province(Grant No.2020B0303010001).
文摘As an emerging microscopic detection tool,quantum microscopes based on the principle of quantum precision measurement have attracted widespread attention in recent years.Compared with the imaging of classical light,quantum-enhanced imaging can achieve ultra-high resolution,ultra-sensitive detection,and anti-interference imaging.Here,we introduce a quantum-enhanced scanning microscope under illumination of an entangled NOON state in polarization.For the phase imager with NOON states,we propose a simple four-basis projection method to replace the four-step phase-shifting method.We have achieved the phase imaging of micrometer-sized birefringent samples and biological cell specimens,with sensitivity close to the Heisenberg limit.The visibility of transmittance-based imaging shows a great enhancement for NOON states.Besides,we also demonstrate that the scanning imaging with NOON states enables the spatial resolution enhancement of√N compared with classical measurement.Our imaging method may provide some reference for the practical application of quantum imaging and is expected to promote the development of microscopic detection.
文摘In this paper,an image processing algorithm which is able to synthesize material textures of arbitrary shapes is proposed.The presented approach uses an arbitrary image to construct a structure layer of the material.The resulting structure layer is then used to constrain the material texture synthesis.The field of second-moment matrices is used to represent the structure layer.Many tests with various constraint images are conducted to ensure that the proposed approach accurately reproduces the visual aspects of the input material sample.The results demonstrate that the proposed algorithm is able to accurately synthesize arbitrary-shaped material textures while respecting the local characteristics of the exemplar.This paves the way toward the synthesis of 3D material textures of arbitrary shapes from 2D material samples,which has a wide application range in virtual material design and materials characterization.
文摘Geological samples often contain significant amounts of iron,which,although not typically the target element,can substantially interfere with the analysis of other elements of interest.To mitigate these interferences,amidoximebased radiation grafted adsorbents have been identified as effective for iron removal.In this study,an amidoximefunctionalized,radiation-grafted adsorbent synthesized from polypropylene waste(PPw-g-AO-10)was employed to remove iron from leached geological samples.The adsorption process was systematically optimized by investigating the effects of pH,contact time,adsorbent dosage,and initial ferric ion concentration.Under optimal conditions-pH1.4,a contact time of 90 min,and an initial ferric ion concentration of 4500 mg/L-the adsorbent exhibited a maximum iron adsorption capacity of 269.02 mg/g.After optimizing the critical adsorption parameters,the adsorbent was applied to the leached geological samples,achieving a 91%removal of the iron content.The adsorbent was regenerated through two consecutive cycles using 0.2 N HNO_(3),achieving a regeneration efficiency of 65%.These findings confirm the efficacy of the synthesized PPw-g-AO-10 as a cost-effective and eco-friendly adsorbent for successfully removing iron from leached geological matrices while maintaining a reasonable degree of reusability.
基金the Major Scientific Instrument Research of National Natural Science Foundation of China(No.61627810)the National Science and Technology Major Program of China(No.2018YFB1305003)。
文摘A lifespan prediction model was developed based on a few samples to provide decision-making information for operation and maintenance,as well as improve the economy and safety of nuclear power plant(NPP)operations.This paper applies a Weibull model to forecast the lifespan of electronic cards with a few samples in NPPs.Relationship between the lifespan prediction of electronic cards and the ambient temperature is revealed using the Arrhenius equation.Censored samples are used to compensate for the lack of fault electronic card data.Scale parameter and shape parameter of the Weibull model are optimized by adjusting the weight ratio between the censored data and the fault data.Characteristic life is then obtained using the rank regression fitting equation.Parameters of the Arrhenius equation can be calculated by dividing the samples into groups according to the ambient temperature.A case study of the intermediate range high-voltage electric card of ex-core neutron detectors demonstrates that the lifespan prediction of electronic cards in NPPs can be successfully predicted with a few samples by combining the Weibull model and the Arrhenius model.This can help provide preventive maintenance recommendations for electronic cards.Finally,operation suggestions for the electronic card’s ambient temperature can be made by utilizing the temperature-life model.
文摘When the 2025 Intertextile Apparel Fabrics Exhibition(Autumn/Winter)was held in Shanghai,more than 3,700 top exhibitors from 26 countries and regions around the world participated.From September 2nd to 4th,the 2025"Keqiao Selected"exhibition shone brightly at the event,showcasing the high-end quality of its products and the innovative strength of its regional brands.
基金supported by the Innovation Driven Development Foundation of Guangxi(No.AD22080035)the Open Project Funding of the Key Laboratory of Tropical Marine Ecosystem and Bioresource,Ministry of Natural Resources(No.2023-QN04)+1 种基金the Guangdong Provincial Ordinary University Youth Innovative Talent Project in 2024(No.2024KQNCX134)the Guangdong Provincial Special Fund Project for Talent Development Strategy in 2024(No.2024R3005).
文摘The investigation of whether sediment samples contain representative grain size distribution information is important for the accurate extraction of sediment characteristics and conduct of related sedimentary record studies.This study comparatively analyzed the numerical and qualitative differences and the degree of correlation of 36 sets of the characteristic parameters of surface sediment parallel sample grain size distribution from three sampling profiles at Jinsha Bay Beach in Zhanjiang,western Guangdong.At each sampling point,five parallel subsamples were established at intervals of 0,10,20,50,and 100 cm along the coastline.The research findings indicate the following:1)relatively large differences in the mean values of the different parallel samples(0.19–0.34Φ),with smaller differences observed in other characteristic grain sizes(D_(10),D_(50),and D_(90));2)small differences in characteristic values among various parallel sample grain size parameters,with at least 33%of the combinations of qualitative results showing inconsistency;3)50%of the regression equations between the skewness of different parallel samples displaying no significant correlation;4)relative deviations of−47.91%to 27.63%and−49.20%to 2.08%existing between the particle size parameters of a single sample and parallel samples(with the average obtained)at intervals of 10 and 50 cm,respectively.As such,small spatial differences,even within 100 cm,can considerably affect grain size parameters.Given the uncertain reasons underlying the representativeness of the samples,which may only cover the area immediately surrounding the sampling station,researchers are advised to design parallel sample collection strategies based on the spatiotemporal distribution characteristics of the parameters of interest during sediment sample collection.This study provides a typical case of the comparative analysis of parallel sample grain size parameters,with a focus on small spatial beach sediment,which contributes to the enhanced understanding of the accuracy and reliability of sediment sample collection strategies and extraction of grain size information.
基金supported by the National Natural Science Foundation of China(Grant Nos.42241106 and 42388101).
文摘The exploration of asteroids has received increasing attention since the 1990s because of the unique information these objects contain about the history of the early solar system.Quasi-satellites are a population of asteroids that co-orbit closely with,but are outside the gravitational control of,the planet.So far,only five Earth quasi-satellites have been recognized,among which(469219)Kamo’oalewa(provisionally designated as 2016 HO3)is currently considered the most stable and the closest of these.However,little is known about this particular asteroid or this class of near-Earth asteroids because of the difficulties of observing them.China has announced that Tianwen-2,the asteroid sample-return mission to Kamo’oalewa,will be launched in 2025.Here,we review the current knowledge of Kamo’oalewa in terms of its physical characteristics,dynamic evolution,surface environment,and origin,and we propose possible breakthroughs that the samples could bring concerning the asteroid Kamo’oalewa as an Earth quasi-satellite.Confirming the origin of Kamo’oalewa,from its prevailing provenance as debris of the Moon,could be a promising start to inferring the evolutionary history of the Moon.This history would probably include a more comprehensive view of the lunar farside and the origin of the asymmetry between the two sides of the Moon.Comparing the samples from the Moon and Kamo’oalewa would also provide new insights into the Earth wind.
基金supported by grants from the Human Resources Development program(Grant No.20204010600250)the Training Program of CCUS for the Green Growth(Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government(MOTIE).
文摘Three-dimensional printing(3DP)offers valuable insight into the characterization of natural rocks and the verification of theoretical models due to its high reproducibility and accurate replication of complex defects such as cracks and pores.In this study,3DP gypsum samples with different printing directions were subjected to a series of uniaxial compression tests with in situ micro-computed tomography(micro-CT)scanning to quantitatively investigate their mechanical anisotropic properties and damage evolution characteristics.Based on the two-dimensional(2D)CT images obtained at different scanning steps,a novel void ratio variable was derived using the mean value and variance of CT intensity.Additionally,a constitutive model was formulated incorporating the proposed damage variable,utilizing the void ratio variable.The crack evolution and crack morphology of 3DP gypsum samples were obtained and analyzed using the 3D models reconstructed from the CT images.The results indicate that 3DP gypsum samples exhibit mechanical anisotropic characteristics similar to those found in naturally sedimentary rocks.The mechanical anisotropy is attributed to the bedding planes formed between adjacent layers and pillar-like structures along the printing direction formed by CaSO_(4)·2H_(2)O crystals of needle-like morphology.The mean gray intensity of the voids has a positive linear relationship with the threshold value,while the CT variance and void ratio have concave and convex relationships,respectively.The constitutive model can effectively match the stress–strain curves obtained from uniaxial compression experiments.This study provides comprehensive explanations of the failure modes and anisotropic mechanisms of 3DP gypsum samples,which is important for characterizing and understanding the failure mechanism and microstructural evolution of 3DP rocks when modeling natural rock behavior.
基金Supported by Key Science and Technology Program(GKZ1222003-2-2)~~
文摘[Objective] This study aimed to compare the residue situation of cimaterol,a kind of forbidden veterinary drug in hair, urine and flesh of pig, so as to provide theoretical basis for monitoring veterinary drug residue in bred animals. [Method]Total three different concentrations of cimaterol were administered to pigs, and the residue amounts of cimaterol in pig hair, urine and flesh were monitored at different raising stage. [Result] During the administration period, the residue amount of cimaterol was highest in urine, so urine is the suitable sample for rapid detection of cimaterol in manufacturing enterprises. Cimaterol could be accumulated in pig hair,where cimaterol was metabolized slowly. Thus, pig hair can be used as the test sample for tracing illegal use of veterinary drugs and for vivo detection. Flesh can be used as test sample for direct judgment whether cimaterol residue exceeds the relevant standard. [Conclusion] This study will provide certain theoretical basis for drug monitor in animal husbandry.
基金co-supported by the National Natural Science Foundation of China(No.51475225)the Aeronautical Science Foundation of China(No.2013ZE52067)
文摘Abstract Industrial robots are used for automatic drilling and riveting. The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly, and can be improved through error compensation to meet aircraft assembly requirements. The achiev- able accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points. Therefore, based on the error similarity error compensation method, a method for choosing sampling points on a uniform grid is proposed. A simulation is conducted to analyze the influence of the sample point locations on error compensation. In addition, the grid steps of the sampling points are optimized using a statistical analysis method. The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot. The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid. After error compensation, the position accuracy of the robot meels the position accuracy require- ments.
基金supported by the National Natural Science Foundation of China (Nos. 41473031,41530211)the MOST Special Fund from the State Key Laboratory of Geological Processes and Mineral Resources,China University of Geosciences,Wuhan (No. MSFGPMR01)
文摘Oxide interference correction plays a vital role in the accurate determination of trace element compositions of geological samples by inductively coupled plasma-mass spectrometry(ICP-MS).In this study,we found that the oxide production is mainly controlled by the gas flow of the ICP-MS and a constant oxide correction factor(OCF)can be measured during a routine analysis.Thus,we can obtain the oxide production by just investigating the gas flow for a fixed ICP-MS system with monitoring of OCF.Si,Ba and LREE oxide interferences on the Sc,Eu and Gd of four geological standard samples GSP-2,JP-1,GBW03112 and GBW03113 were corrected by such method and the results were in good agreement with the recommended values.Therefore,the present study provides a simple and fast correction method for the oxide interferences of the geological samples during the routine analyses.Furthermore,a Microsoft Excel spreadsheet template integrating the correction equations was developed in an in-house software(ICPMSData Cal)for effective calibration.
基金supported by Aviation Science Foundation of China (No. 20100251006)the Technological Foundation Project (No. J132012C001)
文摘During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.
文摘The adsorption of iodine onto silica coated magnetite nanoparticles(im-SCMNPs) that modified with imidazole was investigated for removal of high concentrations of iodine from wastewater. Modified silica magnetite nanoparticles showed high efficiency in removing iodine from wastewater samples. The optimum pH for iodine removal was 7.0-8.0. The adsorption capacity was evaluated using both the Langmuir and Freundlich adsorption isotherm models. The size of the produced magnetite nanoparticles was determined by X-ray diffraction analysis and scanning electron microscopy. Synthesized magnetite nanoparticles showed the high adsorption capacity and would be a good method to increase adsorption efficiency for the removal of iodine in a wastewater treatment process. The Langmuir adsorption capacity(qmax) was found to be 140.84 mg/g of the adsorbent.
基金given to the Ministry of Land and Resources and the Ministry of Science and Technology for the research funding of the projects: SinoProbe 04 and 863 Project 2007AA06Z133
文摘Geochemical subsoil data obtained from China and European laboratories have been compared in this study. 787 C horizon subsoil samples from FOREGS （Forum of European Geological Surveys） geochemical baselines mapping project were sent to China＇s IGGE （Institute of Geophysical and Geochemical Exploration） laboratory and composited to 190 samples according to the 160 kin x 160 km GNT （Global Terrestrial Network） cells. In addition to the FOREGS elemental analysis package, Au, Pt, Pd, B, Ge, Br, CI, Se, N, Li and F were also analyzed by using the IGGE＇s 76 element analytical scheme. Geochemical data statistics, scatter plotting, and geochemical map compilation tech- niques have been employed to investigate differences between FOREGS and IGGE analytical results. The results of two datasets, the IGGE＇s analysis data for composited samples, and the FOREGS average data of samples in each GNT cell, agree extremely well lor about 23 elements, viz： SiO2, St, Al2O3, Zr, Ba, Fe2O3, Ti, Rb, Mn, Gd, CaO, Ga, MgO, P, Pb, Na2O, Y, Th, As, U Sc, Cr, and Co. There are slight differences between-laboratory biases shown as proportional errors between the datasets for Ni, K2O, Tb, Tl, Cu, S, Sin, La, Ce, Pr, Nd, Eu, Ho, Er, Tin, Yb, Lu, Ta, Nb, HE and Dy. For Cd, Cs, Be, Sb, In, Mo, I, Sn, and Te, the correlation of the two datasets and the similarity of the geochemical maps are fairly good, but obvious biases exist between the two datasets at values near detection limits.
基金the National Natural Science Foundation of China(No.51775272,No.51005114)The Fundamental Research Funds for the Central Universities,China(No.NS2014050)。
文摘In data-driven fault diagnosis for turbo-generator sets,the fault samples are usually expensive to obtain,and inevitably with noise,which will both lead to an unsatisfying identification performance of diagnosis models.To address these issues,this paper proposes a fault diagnosis model for turbo-generator sets based on Weighted Extension Neural Network(W-ENN).WENN is a novel neural network which has three types of connection weights and an improved correlation function.The performance of the proposed model is validated against Extension Neural Network(ENN),Support Vector Machine(SVM),Relevance Vector Machine(RVM)and Extreme Learning Machine(ELM)based models.The results indicate that,on noisy small sample sets,the proposed model is superior to the other models in terms of higher identification accuracy with fewer samples and strong noise-tolerant ability.The findings of this study may serve as a powerful fault diagnosis model for turbo-generator sets on noisy small sample sets.
基金supported by the National Natural Science Foundation of China (21875107, U1802256, and 22209204)Leading Edge Technology of Jiangsu Province (BK20220009), the Natural Science Foundation of Jiangsu Province (BK20221140)+2 种基金the China Postdoctoral Science Foundation (2022M713364)Jiangsu Specially Appointed Professors ProgramPriority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)。
文摘The solvation structure of Li^(+) in chemical prelithiation reagent plays a key role in improving the low initial Coulombic efficiency(ICE) and poor cycle performance of silicon-based materials. Never theless, the chemical prelithiation agent is difficult to dope active Li^(+) in silicon-based anodes because of their low working voltage and sluggish Li^(+) diffusion rate. By selecting the lithium–arene complex reagent with 4-methylbiphenyl as an anion ligand and 2-methyltetrahydrofuran as a solvent, the as-prepared micro-sized Si O/C anode can achieve an ICE of nearly 100%. Interestingly, the best prelithium efficiency does not correspond to the lowest redox half-potential(E_(1/2)), and the prelithiation efficiency is determined by the specific influencing factors(E_(1/2), Li^(+) concentration, desolvation energy, and ion diffusion path). In addition, molecular dynamics simulations demonstrate that the ideal prelithiation efficiency can be achieved by choosing appropriate anion ligand and solvent to regulate the solvation structure of Li^(+). Furthermore, the positive effect of prelithiation on cycle performance has been verified by using an in-situ electrochemical dilatometry and solid electrolyte interphase film characterizations.
基金supported both by the Natural Science Foundations of Hebei(No.B2008000210)the Scientific Research Foundation of Agricultural University of Hebei.
文摘A novel method for the determination of five carbamate pesticides （metolcarb, carbofuran, carbaryl, isoprocard and diethofencard） in water samples was developed by dispersive liquid-liquid microextraction （DLLME） coupled with high performance liquid chromatography-diode array detector （HPLC-DAD）. Some experimental parameters that influence the extraction efficiency were studied and optimized to obtain the best extraction results. Under the optimum conditions for the method, the calibration curve was linear in the concentration range from 5 to 1000 ng mL^-1 for all the five carbamate pesticides, with the correlation coefficients （r^2） varying from 0.9984 to 0.9994. Good enrichment factors were achieved ranging from 80 to 177- fold, depending on the compound. The limits of detection （LODs） （S/N = 3） were ranged from 0.1 to 0.5 ng mL^-1. The method has been successfully applied to the analysis of the pesticide residues in environmental water samples.
