期刊文献+
共找到1,831篇文章
< 1 2 92 >
每页显示 20 50 100
Initial orbit determination of BDS-3 satellites based on new code signals 被引量:4
1
作者 Fei Ye Yunbin Yuan Jikun Ou 《Geodesy and Geodynamics》 2018年第4期342-346,共5页
For the two newly launched satellites(PRN number 27 and 28) of the future global BeiDou navigation satellite system(BDS-3), there is no available broadcast ephemeris data and other initial orbit information, but the i... For the two newly launched satellites(PRN number 27 and 28) of the future global BeiDou navigation satellite system(BDS-3), there is no available broadcast ephemeris data and other initial orbit information, but the initial orbit is the fundamental of the comprehensive analysis of the satellites and their signals. Precise orbit determination(POD) also requires determination of a priori initial value with a certain precision in order to avoid problems such as filter divergence during POD. Compared with the Newton iteration method, which relies on the initial value, this study utilizes the Bancroft algorithm to directly solve the nonlinear equations with the advantage of numerical stability. The initial orbits of these two satellites are calculated based on new code signals, and their results are analyzed and discussed. The experimental results show that, with the exception of very few epochs, when the new code signal is utilized, the median and robust variance factor of the observed residuals computed using pseudo-range observations and the solved initial orbits are less than 4 and 2 m, respectively. It also shows that this solution can be used for rapid initial orbit recovery after maneuvers of the new BeiDou satellites. 展开更多
关键词 New-generation BeiDou satellites New code signals Initial orbit determination Bancroft
原文传递
Novel non-coherent integration method using binary phase-coded radar signal 被引量:2
2
作者 田黎育 何苗 +1 位作者 刘斌 傅雄军 《Journal of Beijing Institute of Technology》 EI CAS 2013年第1期60-66,共7页
The m series with 511 bits is taken as an example being applied in non-coherent integra- tion algorithm. A method to choose the bi-phase code is presented, which is 15 kinds of codes are picked out of 511 kinds of m s... The m series with 511 bits is taken as an example being applied in non-coherent integra- tion algorithm. A method to choose the bi-phase code is presented, which is 15 kinds of codes are picked out of 511 kinds of m series to do non-coherent integration. It is indicated that the power in- creasing times of larger target sidelobe is less than the power increasing times of smaller target main- lobe because of the larger target' s pseudo-randomness. Smaller target is integrated from larger tar- get sidelobe, which strengthens the detection capability of radar for smaller targets. According to the sidelobes distributing characteristic, a method is presented in this paper to remove the estimated sidelobes mean value for signal detection after non-coherent integration. Simulation results present that the SNR of small target can be improved approximately 6. 5 dB by the proposed method. 展开更多
关键词 binary phase-coded signal non-coherent integration code agility peak sidelobe level(PSL) mainlobe-peak sidelobe ratio
在线阅读 下载PDF
Finite rate of innovation sparse sampling for a binary frequency-coded ultrasonic signal 被引量:1
3
作者 Song Shoupeng Chen Yiqian +1 位作者 Xu Baowen Qiu Yue 《Journal of Southeast University(English Edition)》 EI CAS 2022年第1期27-35,共9页
To achieve sparse sampling on a coded ultrasonic signal,the finite rate of innovation(FRI)sparse sampling technique is proposed on a binary frequency-coded(BFC)ultrasonic signal.A framework of FRI-based sparse samplin... To achieve sparse sampling on a coded ultrasonic signal,the finite rate of innovation(FRI)sparse sampling technique is proposed on a binary frequency-coded(BFC)ultrasonic signal.A framework of FRI-based sparse sampling for an ultrasonic signal pulse is presented.Differences between the pulse and the coded ultrasonic signal are analyzed,and a response mathematical model of the coded ultrasonic signal is established.A time-domain transform algorithm,called the high-order moment method,is applied to obtain a pulse stream signal to assist BFC ultrasonic signal sparse sampling.A sampling of the output signal with a uniform interval is then performed after modulating the pulse stream signal by a sampling kernel.FRI-based sparse sampling is performed using a self-made circuit on an aluminum alloy sample.Experimental results show that the sampling rate reduces to 0.5 MHz,which is at least 12.8 MHz in the Nyquist sampling mode.The echo peak amplitude and the time of flight are estimated from the sparse sampling data with maximum errors of 9.324%and 0.031%,respectively.This research can provide a theoretical basis and practical application reference for reducing the sampling rate and data volume in coded ultrasonic testing. 展开更多
关键词 coded ultrasonic signal finite rate of innovation high-order moment sparse sampling circuit implementation
在线阅读 下载PDF
Totally Coded Method for Signal Flow Graph Algorithm 被引量:2
4
作者 徐静波 周美华 《Journal of Donghua University(English Edition)》 EI CAS 2002年第2期63-68,共6页
After a code-table has been established by means of node association information from signal flow graph, the totally coded method (TCM) is applied merely in the domain of code operation beyond any figure-earching algo... After a code-table has been established by means of node association information from signal flow graph, the totally coded method (TCM) is applied merely in the domain of code operation beyond any figure-earching algorithm. The code-series (CS) have the holo-information nature, so that both the content and the sign of each gain-term can be determined via the coded method. The principle of this method is simple and it is suited for computer programming. The capability of the computer-aided analysis for switched current network (SIN) can be enhanced. 展开更多
关键词 signal FLOW graph algorithm codeD method SIN.
在线阅读 下载PDF
Polyphase coded signal design for MIMO radar using MO-MicPSO 被引量:9
5
作者 Xiangneng Zeng Yongshun Zhang Yiduo Guo 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2011年第3期381-386,共6页
A novel modified optimization technique known as the multi-objective micro particle swarm optimization(MO-MicPSO) is proposed for polyphase coded signal design.The proposed MO-MicPSO requires only a small population... A novel modified optimization technique known as the multi-objective micro particle swarm optimization(MO-MicPSO) is proposed for polyphase coded signal design.The proposed MO-MicPSO requires only a small population size compared with the standard particle swarm optimization that uses a larger population size.This new method is guided by an elite archive to finish the multi-objective optimization.The orthogonal polyphase coded signal(OPCS) can fundamentally improve the multiple input multiple output(MIMO) radar system performance,with which the radar system has high resolution and abundant signal channels.Simulation results on the polyphase coded signal design show that the MO-MicPSO can perform quite well for this high-dimensional multi-objective optimized problem.Compared with particle swarm optimization or genetic algorithm,the proposed MO-MicPSO has a better optimized efficiency and less time consumption. 展开更多
关键词 multi-objective micro particle swarm optimization(MO-MicPSO) phase-coded signal multiple input multiple output(MIMO) radar ambiguity function.
在线阅读 下载PDF
Recognition Method Based on Wigner-Hough Transform for Poly-Phase Code Radar Signal 被引量:1
6
作者 Wenxu Zhang Bing Wang Fuli Sun 《International Journal of Communications, Network and System Sciences》 2017年第8期128-137,共10页
In order to solve the recognition of polyphase code radar signal, this paper gives two methods based on Frank code, i.e. the high-order spectrum recognition method and the fractional Fourier transform (FRFT) method, b... In order to solve the recognition of polyphase code radar signal, this paper gives two methods based on Frank code, i.e. the high-order spectrum recognition method and the fractional Fourier transform (FRFT) method, by analyzing the micro characteristics of polyphase code signals in time and frequency domain respectively. And a recognition algorithm based on Wigner-Hough transform (WHT) is developed in this paper. We verify the validity of each method by computer simulation and give relative merits and demerits. A set of results demonstrate that the algorithm based on Wigner-Hough transform has better recognition performance in low signal-to-noise (SNR) than others. 展开更多
关键词 Radar signal Processing POLYPHASE code Fractional FOURIER TRANSFORM Wigner-Hough TRANSFORM
在线阅读 下载PDF
Implementation of a kind of FPGA-based binary phase coded radar signal processor architecture 被引量:1
7
作者 田黎育 孙密 万阳良 《Journal of Beijing Institute of Technology》 EI CAS 2012年第4期526-531,共6页
A flexible field programmable gate array based radar signal processor is presented. The radar signal processor mainly consists of five functional modules: radar system timer, binary phase coded pulse compression(PC... A flexible field programmable gate array based radar signal processor is presented. The radar signal processor mainly consists of five functional modules: radar system timer, binary phase coded pulse compression(PC), moving target detection (MTD), constant false alarm rate (CFAR) and target dots processing. Preliminary target dots information is obtained in PC, MTD, and CFAR modules and Nios I! CPU is used for target dots combination and false sidelobe target removing. Sys- tem on programmable chip (SOPC) technique is adopted in the system in which SDRAM is used to cache data. Finally, a FPGA-based binary phase coded radar signal processor is realized and simula- tion result is given. 展开更多
关键词 field programmable gate array(FPGA) radar signal processor system on programma-ble chip (SOPC) binary phase coded
在线阅读 下载PDF
Efficient practical codebook-precoding MIMO scheme based on signal space diversity 被引量:2
8
作者 Zhanji Wu Xiang Gao 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2016年第1期1-9,共9页
A novel practical codebook-precoding multiple-input multiple-output(MIMO) system based on signal space diversity(SSD) with the minimum mean squared error(MMSE)receiver is proposed.This scheme utilizes rotation m... A novel practical codebook-precoding multiple-input multiple-output(MIMO) system based on signal space diversity(SSD) with the minimum mean squared error(MMSE)receiver is proposed.This scheme utilizes rotation modulation and space-time-frequency component interleaving.A novel precoding matrix selection criterion to maximize the average signal to interference plus noise ratio(SINR) is also put forward for the proposed scheme,which has a larger average mutual information(AMI).Based on the AMI- maximization criterion,the optimal rotation angles for the proposed system are also investigated.The new scheme can make full use of space-time-frequency diversity and signal space diversity,and exhibit high spectral efficiency and high reliability in fading channels.Simulation results show that the proposed scheme greatly outperforms the conventional bit- interleaved coded modulation(BICM) MIMO-orthogonal frequency division multiplexing(OFDM) scheme without SSD,which is up to4.5 dB signal-to-noise ratio(SNR) gain. 展开更多
关键词 signal space diversity(SSD) average mutual information(AMI) Turbo code multiple-input multiple-output(MIMO) minimum mean squared error(MMSE).
在线阅读 下载PDF
SIGNAL模型多线程代码生成研究 被引量:1
9
作者 阚双龙 黄志球 杨志斌 《计算机科学与探索》 CSCD 北大核心 2018年第4期536-549,共14页
反应式系统是指与环境不断发生交互的控制系统。这类系统通过接收外部环境输入,对输入进行计算,并将计算结果反馈到外部环境来控制系统的行为。同步语言是一种规约反应式系统的建模语言,同步语言的优势在于支持形式化验证和精确的代码... 反应式系统是指与环境不断发生交互的控制系统。这类系统通过接收外部环境输入,对输入进行计算,并将计算结果反馈到外部环境来控制系统的行为。同步语言是一种规约反应式系统的建模语言,同步语言的优势在于支持形式化验证和精确的代码自动生成。面向多时钟同步语言SIGNAL,提出了一种SIGNAL模型到多线程Java代码生成过程。该代码生成过程基于以下3种中间结构:同步时钟卫式操作、卫式操作和带划分的卫式操作。将整个代码生成过程分为4个主要转化步骤,给出每一步转化规则。最后对空客A340的警报系统进行实例分析,评估生成代码的正确性。多线程Java代码生成可以为SIGNAL模型在分布式和多核体系下的应用提供支撑。 展开更多
关键词 反应式系统 同步语言 signal 代码生成 卫式操作
在线阅读 下载PDF
一种PSK弱信号低码速率盲估计方法
10
作者 刘飞扬 闫续 李林 《无线电通信技术》 北大核心 2026年第1期167-172,共6页
在非协作场景中,循环自相关是一种盲估计相移键控(Phase Shift Keying,PSK)信号码速率的有效方法。但在低信噪比、低码速率情况下,存在部分循环自相关切片中表征码速率信息的峰值被噪声淹没的问题。提出一种基于最佳延迟估计的循环自相... 在非协作场景中,循环自相关是一种盲估计相移键控(Phase Shift Keying,PSK)信号码速率的有效方法。但在低信噪比、低码速率情况下,存在部分循环自相关切片中表征码速率信息的峰值被噪声淹没的问题。提出一种基于最佳延迟估计的循环自相关码速率盲估计方法,将延迟与循环自相关在零循环频率处幅值的线性关系进行推导,揭示出斜率中包含的最佳延迟信息,更好地指导码速率精确估计的切片选择。仿真实验表明,最佳延迟的有效估计提升了码速率估计方法的准确性和鲁棒性。 展开更多
关键词 参数估计 低信噪比 码速率 循环自相关
在线阅读 下载PDF
高轨接收机强星辅助弱星的信号快速重捕算法
11
作者 张春杰 葛建 《中国空间科学技术(中英文)》 北大核心 2026年第1期169-177,共9页
为了捕获来自地球对侧的微弱导航信号,运行在地球静止轨道及更高高度的接收机必须采用长相干积分时间。然而长相干积分时间的使用将导致信号捕获时,信号搜索单元数量过大。高轨接收机能接收到一颗导航卫星主瓣信号的概率较高,且接收机... 为了捕获来自地球对侧的微弱导航信号,运行在地球静止轨道及更高高度的接收机必须采用长相干积分时间。然而长相干积分时间的使用将导致信号捕获时,信号搜索单元数量过大。高轨接收机能接收到一颗导航卫星主瓣信号的概率较高,且接收机捕获主瓣信号(称主瓣信号对应的卫星为强星)时,其捕获效率和准确度均远高于旁瓣信号(称旁瓣信号对应的卫星为弱星)。基于这一事实,提出了一种利用强星辅助弱星的信号快速重捕算法。首先对高轨接收机失锁期间的位置误差变化规律进行分析,以确定接收机到弱星伪距估计误差的范围。其次,在接收机已经捕获到一个主瓣信号的前提下,利用接收机与已捕获卫星之间的距离约束,来减小接收机位置的不确定性,从而压缩待捕获卫星伪距估计误差的范围,达到减小码相位搜索单元数量的目的。理论分析和仿真结果共同表明,在强星的辅助下,接收机在捕获弱星时,码相位搜索范围平均减少了50%以上,且减小程度与强星和弱星视距矢量夹角的正弦值成反比;接收机的轨道高度越高,强星和弱星视距矢量夹角的平均值越小,对弱星码相位搜索范围的压缩效果越好。该方法能大幅提升高轨接收机信号重捕效率,进而提高接收机的自主导航能力。 展开更多
关键词 高轨接收机 信号重捕 主瓣信号 旁瓣信号 码相位范围压缩
在线阅读 下载PDF
区间通过信号机并置场景设计分析
12
作者 邢正阳 杨男 《科技创新与应用》 2026年第8期133-136,共4页
为提高线路的通过能力,区间通过信号机与线路所通过信号机并置设置时,标准闭塞电路和通用联锁软件无法满足运营和安全需求。结合线路所站型的特殊点,分析设计需求和通用设计间的差异、通用设计的特点,对继电电路和联锁软件进行特殊设计... 为提高线路的通过能力,区间通过信号机与线路所通过信号机并置设置时,标准闭塞电路和通用联锁软件无法满足运营和安全需求。结合线路所站型的特殊点,分析设计需求和通用设计间的差异、通用设计的特点,对继电电路和联锁软件进行特殊设计。该文以高尔山线路所为例,针对区间通过信号机与线路所通过信号机并置典型站型的设计需求,从信号显示、电码化编码等角度,分析并提出闭塞电路、点灯电路、电码化电路和联锁软件的设计方案,以为相同或类似场景的设计提供参考。 展开更多
关键词 区间信号机并置 红灯重复 容许信号 电码化 区间闭塞
在线阅读 下载PDF
强干扰环境下多信源视频信号同步通信传输方法
13
作者 陈少宏 王森 杨军 《电子设计工程》 2026年第6期188-191,196,共5页
多信源视频信号在强干扰环境中,振幅、频率与相位之间的高耦合性导致信号同步丢失率较高,影响通信系统的稳定性和可靠性。为此,提出强干扰环境下多信源视频信号同步通信传输方法。通过振幅、频率与相位调制原始多信源视频信号,将其划分... 多信源视频信号在强干扰环境中,振幅、频率与相位之间的高耦合性导致信号同步丢失率较高,影响通信系统的稳定性和可靠性。为此,提出强干扰环境下多信源视频信号同步通信传输方法。通过振幅、频率与相位调制原始多信源视频信号,将其划分为多个像素块,计算差分信号并对其进行量化。将量化差分信号转换为二进制形式,联合逆过程完成多信源视频信号的编码与解码。利用时分多址技术与载波同步算法计算解码重建信号的时间偏移与频率偏移,经过偏移校正与调整完成视频信号的时间同步与频率同步,实现多信源视频信号同步通信传输。实验结果表明,所提方法应用后多信源视频信号平均丢失率最小值达到2%,时间偏移控制在±0.1 ms内,频率偏移控制在±0.16 Hz内。该结果证实了所提方法可以提高多信源视频信号在强干扰环境中同步通信传输的稳定性,能够保证通信质量。 展开更多
关键词 同步通信传输 多信源 信号编码与调制 强干扰环境 视频信号
在线阅读 下载PDF
Gray code编码技术在车辆油耗检测中的应用 被引量:1
14
作者 吴萍 《潍坊学院学报》 2008年第2期23-25,31,共4页
车辆性能测试中,在发动机怠速工作状态或小流量油路抖动情况下,油耗传感器的脉动误差较大,严重影响了测试精度。本文提出了一种采用格雷编码技术的方法来解决测试分辨率难以提高的问题。该方法已在实际中得到应用,实践证明采用该抖动处... 车辆性能测试中,在发动机怠速工作状态或小流量油路抖动情况下,油耗传感器的脉动误差较大,严重影响了测试精度。本文提出了一种采用格雷编码技术的方法来解决测试分辨率难以提高的问题。该方法已在实际中得到应用,实践证明采用该抖动处理技术,实现简单,工作可靠,取得了很好的应用效果。 展开更多
关键词 油耗检测 脉动 信号编码 GRAY code
在线阅读 下载PDF
基于改进神经网络的轨道角动量光纤通信解调
15
作者 沈袁勋 陈鑫杰 马雪莲 《光学技术》 北大核心 2026年第2期190-198,共9页
针对轨道角动量光纤通信系统误码率高的问题,提出一种基于改进神经网络的轨道角动量(OAM)解调方法。对于神经网络架构,使用卷积神经网络捕捉OAM模式图像的局部特征,使用Swin Transformer捕捉OAM模式图像的全局信息,以增强OAM模式图像特... 针对轨道角动量光纤通信系统误码率高的问题,提出一种基于改进神经网络的轨道角动量(OAM)解调方法。对于神经网络架构,使用卷积神经网络捕捉OAM模式图像的局部特征,使用Swin Transformer捕捉OAM模式图像的全局信息,以增强OAM模式图像特征的判别力,进而提升OAM模式解调的准确性。对于神经网络训练,采用广义互信息代替传统交叉熵作为损失函数,使神经网络在学习OAM模式识别的同时,学习包含信道软信息的概率分布,以提升低密度奇偶校验码的纠错效果。实验结果表明,所提模型通过网络架构与训练两个方面的改进,有效提升了OAM模式的解调准确性,并且显著降低了OAM光纤通信系统的误码率。 展开更多
关键词 光纤通信 模分复用 轨道角动量 信号解调 低密度奇偶校验码 卷积神经网络
原文传递
单码道绝对式时栅传感器信号处理系统
16
作者 鲁进 雷亚伟 +1 位作者 郑德成 刘阳琳 《仪表技术与传感器》 北大核心 2026年第1期9-15,共7页
为实现单码道绝对位移的测量与解算,提出了一种利用绝对相位差均值的单调性进行绝对位置判断的方法并设计了一套信号处理系统。研究以FPGA系统为主控单元,采用DDS(数字频率合成)技术产生高频率激励信号,经过双极性转换、滤波和功率放大... 为实现单码道绝对位移的测量与解算,提出了一种利用绝对相位差均值的单调性进行绝对位置判断的方法并设计了一套信号处理系统。研究以FPGA系统为主控单元,采用DDS(数字频率合成)技术产生高频率激励信号,经过双极性转换、滤波和功率放大电路后进入传感器,感应后的信号经过信号调理电路,得到1路增量相位、2路绝对相位与增量相位的相位差和绝对相位差均值这4路信号并进行对极判断。实验结果表明:测量的误差范围为±193.04″,误差修正后下降到±34.75″,该系统能够有效判断传感器的绝对位置,实现了整周范围内绝对位移的测量。 展开更多
关键词 时栅传感器 信号处理 位移解算 单码道绝对式 FPGA
在线阅读 下载PDF
基于SST编码技术的工业云在铁路信号领域的应用方案
17
作者 左德参 Jens Schindler +1 位作者 Martin Süßkraut 陈光智 《铁道通信信号》 2026年第4期1-7,共7页
面对传统信号系统专用安全硬件架构成本高、扩展性差和系统复杂等问题,云技术提供了有效的解决方案,但云化系统的通用底层硬件、虚拟化资源配置、算力动态调度等给信号系统的安全带来了新的挑战。为应对这一挑战,研究SST编码技术在信号... 面对传统信号系统专用安全硬件架构成本高、扩展性差和系统复杂等问题,云技术提供了有效的解决方案,但云化系统的通用底层硬件、虚拟化资源配置、算力动态调度等给信号系统的安全带来了新的挑战。为应对这一挑战,研究SST编码技术在信号系统与工业云平台集成中的关键作用与实现路径。SST编码作为一种软件级安全技术,通过自动化工具将C/C++源代码转换生成冗余的C代码结构,结合双通道执行结果的校验检错机制,可在软件层面检测硬件随机故障与软件系统性错误,显著提升系统安全性。阐述SST编码的基本原理、特点及其在铁路信号安全数据处理中的优势,提出基于SST编码技术的云安全平台架构。该架构通过双通道软件算法实现安全检错,使系统安全性与底层平台解耦,为信号系统在通用工业云平台上的安全运行提供一种技术方案。 展开更多
关键词 SST编码 工业云平台 云安全 铁路信号系统 安全性 虚拟化 编码规范
在线阅读 下载PDF
基于带限信号压缩的高效软件无线电卫星双向时间比对
18
作者 程龙 董绍武 +3 位作者 武文俊 弓剑军 王威雄 高喆 《电子与信息学报》 北大核心 2026年第1期212-221,共10页
卫星双向时间比对(TWSTFT)技术因其高精度特性在时间同步领域具有重要应用价值,其中实时性是衡量系统性能的关键指标。传统硬件实现的TWSTFT存在显著的周日效应问题,而基于开环架构和高分辨率多相关器的软件定义无线电(SDR)实现方法虽... 卫星双向时间比对(TWSTFT)技术因其高精度特性在时间同步领域具有重要应用价值,其中实时性是衡量系统性能的关键指标。传统硬件实现的TWSTFT存在显著的周日效应问题,而基于开环架构和高分辨率多相关器的软件定义无线电(SDR)实现方法虽能有效抑制该效应,却因计算复杂度高而面临实时性挑战。为提升SDR接收机的运算效率并改善其短期稳定性,该研究在传统信号压缩法基础上提出了一种基于带限信号压缩的高效SDR实现方法。该方法创新性地采用伪随机噪声(PRN)码整数倍抽取序列与接收信号进行相关运算以获得压缩值,并通过建立抽取序列采样频率与信号带宽的定量关系实现相关结果的高效重构。该机制通过消除传统算法的冗余计算环节,在保证测量精度的同时显著提升了运算效率并降低了系统资源开销。为验证方法有效性,该文设计了不同带宽和基线长度的对比实验,结果表明:相较于TWSTFT SDR中常用的多相关器法,该方法的运算速度提升了7~8倍,资源消耗量降低了85~90%,且信号预处理阶段的滤波操作能有效抑制带外噪声干扰。这种效率提升不仅增加了单位拟合周期内的有效测量数据量,通过统计平均效应降低了随机噪声影响,还显著提高了比对结果的短期稳定性,为高精度时间比对提供了新的技术途径。 展开更多
关键词 卫星双向时间比对 软件定义无线电 信号压缩 多相关器 伪随机噪声码
在线阅读 下载PDF
基于Code Composer Studio的无限冲激响应滤波器(IIR)的设计 被引量:2
19
作者 许志敏 魏海峰 陆彦如 《计算机与数字工程》 2021年第4期818-821,共4页
论文讨论了一种用于数字信号处理中的无限冲激响应(IIR)数字滤波器。论文采用双线性变换法设计基于巴特沃斯法的IIR数字滤波器,详细说明了双线性变换法的处理过程和巴特沃斯模拟滤波器的设计过程,并以一个低通IIR数字滤波器的实现为例,... 论文讨论了一种用于数字信号处理中的无限冲激响应(IIR)数字滤波器。论文采用双线性变换法设计基于巴特沃斯法的IIR数字滤波器,详细说明了双线性变换法的处理过程和巴特沃斯模拟滤波器的设计过程,并以一个低通IIR数字滤波器的实现为例,应用DSP集成开发环境Code Composer Studio(CCS)软件仿真进行验证,能满足要求。 展开更多
关键词 无限冲激响应滤波器 双线性变换法 数字信号处理 code composer studio
在线阅读 下载PDF
Digital coherent detection research on Brillouin optical time domain reflectometry with simplex pulse codes 被引量:7
20
作者 郝蕴琦 叶青 +2 位作者 潘政清 蔡海文 瞿荣辉 《Chinese Physics B》 SCIE EI CAS CSCD 2014年第11期253-256,共4页
The digital coherent detection technique has been investigated without any frequency-scanning device in the Brillouin optical time domain reflectometry (BOTDR), where the simplex pulse codes are applied in the sensi... The digital coherent detection technique has been investigated without any frequency-scanning device in the Brillouin optical time domain reflectometry (BOTDR), where the simplex pulse codes are applied in the sensing system. The time domain signal of every code sequence is collected by the data acquisition card (DAQ). A shift-averaging technique is applied in the frequency domain for the reason that the local oscillator (LO) in the coherent detection is fix-frequency deviated from the primary source. With the 31-bit simplex code, the signal-to-noise ratio (SNR) has 3.5-dB enhancement with the same single pulse traces, accordant with the theoretical analysis. The frequency fluctuation for simplex codes is 14.01 MHz less than that for a single pulse as to 4-m spatial resolution. The results are believed to be beneficial for the BOTDR performance improvement. 展开更多
关键词 Brillouin optical time domain reflectometry digital coherent detection simplex pulse codes signal-to-noise ratio
原文传递
上一页 1 2 92 下一页 到第
使用帮助 返回顶部