In this study, novel core-shell SiO<sub>2</sub>-coated iron nanoparticles (SiO<sub>2</sub>-nZVI) were synthesized using a one-step Stoeber method. The Malachite green degradation abilities of t...In this study, novel core-shell SiO<sub>2</sub>-coated iron nanoparticles (SiO<sub>2</sub>-nZVI) were synthesized using a one-step Stoeber method. The Malachite green degradation abilities of the nanoparticles were investigated. The effects of ethanol/distilled water volume ratio, presence and absence of PEG, tetraethyl orthosilicate (TEOS) dosage, and hydrolysis time used in the nanoparticles preparation process were investigated. The results indicated that the SiO<sub>2</sub>-coated iron nanoparticles had the highest reduction activity when the particles synthesized with ethanol/H<sub>2</sub>O ratio of 2:1, PEG of 0.15 ml, TEOS of 0.5 ml and the reaction time was 4 h. The SiO<sub>2</sub>-nZVI nanoparticles were characterized using Transmission Electron Microscopy (TEM), Energy Dispersive Spectrometry (EDS) and powder X-Ray Diffraction (XRD). The results showed that the average particles diameter of the SiO<sub>2</sub>-nZVI was 20 - 30 nm. The thickness of the outside SiO<sub>2</sub> film is consistent and approximately 10 nm. The results indicated that the nanoparticles coated completely with a transparent SiO<sub>2</sub>-film. Such nanoparticles could have wide applications in dye decolorization.展开更多
Eu3+ doped-CdTe(CdTe:Eu3+)nanocrystals were prepared via a facile hydrothermal method,and Eu3+ was successfully incorporated into the crystal lattice of CdTe and measured by X-ray powder diffraction(XRD),transmission ...Eu3+ doped-CdTe(CdTe:Eu3+)nanocrystals were prepared via a facile hydrothermal method,and Eu3+ was successfully incorporated into the crystal lattice of CdTe and measured by X-ray powder diffraction(XRD),transmission electron microscopy(TEM),ultraviolet-visible(UV-Vis) absorption spectroscopy and fluorescence emission.The CdTe:Eu^3+ nanocrystals still have a cubic crystal structure,and the corresponding XRD peaks of CdTe:Eu3+nanocrystals shift to larger angles compared with those of pure CdTe.The CdTe:Eu3+ nanocrystals are monodisperse and the particles size is about 2-4 nm.Compared with pure CdTe,the CdTe:Eu^3+ nanocrystals have larger band gap and thus exhibit blueshift in the emission spectra,which could be accounted for by the energy transfer between Eu^3+ and CdTe.To enhance the stability and functionality of CdTe:Eu3+nanocrystals,the CdTe:Eu3+nanocrystals were coated with SiO2 and the core-shell SiO2-coated CdTe:Eu3+nanocrystals(CdTe:Eu^3+@SiO2) were prepared via microemulsion method.TEM results show that CdTe:Eu3+nanocrystals are uniformly dispersed in the shell,and CdTe:Eu3+@SiO2 nanospheres are uniformly spherical with an average diameter of about 75 nm.The fluorescence emission of CdTe:Eu3+@SiO2(567 nm) shows a blueshift compared with that of CdTe:Eu^3+nanocrystals(632 nm),possibly because of altered surface properties after SiO2 coating.CdTe:Eu^3+and CdTe:Eu^3+@SiO2 with tunable photoluminescence are potentially useful in fabricating optical and bioimaging devices.展开更多
The anti-bacterial adhesion properties of TiO2-coated polymethyl methacrylate （PMMA） surfaces are investigated systematically. In detail, the adhesion of S. aureus （gram positive） and E. coli （gram negative） to ...The anti-bacterial adhesion properties of TiO2-coated polymethyl methacrylate （PMMA） surfaces are investigated systematically. In detail, the adhesion of S. aureus （gram positive） and E. coli （gram negative） to TiO2-coated and uncoated PMMA surfaces are performed by the plate counting method. Afterwards, the adhesion free energy of bacteria on both supporting materials is quantified using the thermodynamic approach of Lifshitz van der Waals and acid/base interactions. The superior anti-adhesion capability of TiO2-coated PMMA is demonstrated when compared to native PMMA, both experimentally and theoretically.展开更多
TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to es...TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to estimate activity of catalysts and determine the kinetics. And the effects of parameters including the initial concentration of AY, light intensity and TiO2 content in catalysts were examined. The results indicate that TAs has a higher efficiency in decomposition of AY than P25, pure TiO2 particles as well as the mixture of TiO2 powder and active carbon. The photocatalytic degradation rate is found to follow the pseudo-first order kinetics with respect to the AY concentration. The new kinetic model fairly resembles the classic Langmuir-Hinshelwood equation, and the rate constant is proportional to the square root of the light intensity in a wide range. However, its absorption performance depends on the surface areas of catalysts. The model fits quite well with the experimental data and elucidates phenomena about the effects of the TiO2 content in TAs on the degradation rate.展开更多
TiO2-coated SnO2 （TCS） hollow spheres, which are new anode materials for lithium ion （Li-ion） batteries, were prepared and characterized with X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transm...TiO2-coated SnO2 （TCS） hollow spheres, which are new anode materials for lithium ion （Li-ion） batteries, were prepared and characterized with X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, cyclic voltammetry （CV）, and galvanostatic charge/discharge tests. The results obtained from XRD, SEM, and TEM show that TiO2 can be uniforrrdy coated on the surface of SnO2 hollow spheres with the assistance of anionic surfactant. The cyclic voltammograms indicate that both TiO2 and SnO2 exhibit the activity for Li-ion storage. The charge/discharge tests show that the prepared TCS hollow spheres have a higher reversible coulomb efficiency and a better cycling stability than the uncoated SnO2 hollow spheres.展开更多
As an important green manufacturing process,dry grinding has problems such as high grinding temperature and insufficient cooling capacity.Aiming at the problems of sticking and burns in dry grinding of titanium alloys...As an important green manufacturing process,dry grinding has problems such as high grinding temperature and insufficient cooling capacity.Aiming at the problems of sticking and burns in dry grinding of titanium alloys,grinding performance evaluation of molybdenum disulfide(MoS_(2))solid lubricant coated brazed cubic boron carbide(CBN)grinding wheel(MoS_(2)-coated CBN wheel)in dry grinding titanium alloys was carried out.The lubrication mechanism of MoS_(2)in the grinding process is analyzed,and the MoS_(2)-coated CBN wheel is prepared.The results show that the MoS_(2)solid lubricant can form a lubricating film on the ground surface and reduce the friction coefficient and grinding force.Within the experimental parameters,normal grinding force decreased by 42.5%,and tangential grinding force decreased by 28.1%.MoS_(2)lubricant can effectively improve the heat dissipation effect of titanium alloy grinding arc area.Compared with common CBN grinding wheel,MoS_(2)-coated CBN wheel has lower grinding temperature.When the grinding depth reaches 20μm,the grinding temperature decreased by 30.5%.The wear of CBN grains of grinding wheel were analyzed by mathematical statistical method.MoS_(2)lubricating coating can essentially decrease the wear of grains,reduce the adhesion of titanium alloy chip,prolong the service life of grinding wheel,and help to enhance the surface quality of workpiece.This research provides high-quality and efficient technical support for titanium alloy grinding.展开更多
Several lithium-ion batteries of 18650-type were assembled with pristine or Al2O3-coated LiNi0.4Co0.2Mn0.4O2（NCM） as cathode material and mesocarbon microbeads（MCMB） as anode material.The cycling performance of th...Several lithium-ion batteries of 18650-type were assembled with pristine or Al2O3-coated LiNi0.4Co0.2Mn0.4O2（NCM） as cathode material and mesocarbon microbeads（MCMB） as anode material.The cycling performance of the batteries was examined under 25 °C at a 2C rate within a potential range of 2.75―4.20 V.The changes of the crystal structure,the lattice parameter,the mean crystallite size,and the mean micro-strain of pristine NCM and Al2O3-coated NCM during the charge-discharge cycling were determined by X-ray diffraction（XRD）.The results indicate that the bulk structure of Al2O3-coated NCM is more stable than that of pristine NCM,which leads to the better cycling performance of Al2O3-coated NCM compared to that of pristine NCM.展开更多
文摘In this study, novel core-shell SiO<sub>2</sub>-coated iron nanoparticles (SiO<sub>2</sub>-nZVI) were synthesized using a one-step Stoeber method. The Malachite green degradation abilities of the nanoparticles were investigated. The effects of ethanol/distilled water volume ratio, presence and absence of PEG, tetraethyl orthosilicate (TEOS) dosage, and hydrolysis time used in the nanoparticles preparation process were investigated. The results indicated that the SiO<sub>2</sub>-coated iron nanoparticles had the highest reduction activity when the particles synthesized with ethanol/H<sub>2</sub>O ratio of 2:1, PEG of 0.15 ml, TEOS of 0.5 ml and the reaction time was 4 h. The SiO<sub>2</sub>-nZVI nanoparticles were characterized using Transmission Electron Microscopy (TEM), Energy Dispersive Spectrometry (EDS) and powder X-Ray Diffraction (XRD). The results showed that the average particles diameter of the SiO<sub>2</sub>-nZVI was 20 - 30 nm. The thickness of the outside SiO<sub>2</sub> film is consistent and approximately 10 nm. The results indicated that the nanoparticles coated completely with a transparent SiO<sub>2</sub>-film. Such nanoparticles could have wide applications in dye decolorization.
基金financially supported by the National Natural Science Foundation of China (No.21364007)the Natural Science Foundation of Inner Mongolia (No.2016MS0201)the Program for Young Talents of Science and Technology of Baotou Teachers College (No.01135003)
文摘Eu3+ doped-CdTe(CdTe:Eu3+)nanocrystals were prepared via a facile hydrothermal method,and Eu3+ was successfully incorporated into the crystal lattice of CdTe and measured by X-ray powder diffraction(XRD),transmission electron microscopy(TEM),ultraviolet-visible(UV-Vis) absorption spectroscopy and fluorescence emission.The CdTe:Eu^3+ nanocrystals still have a cubic crystal structure,and the corresponding XRD peaks of CdTe:Eu3+nanocrystals shift to larger angles compared with those of pure CdTe.The CdTe:Eu3+ nanocrystals are monodisperse and the particles size is about 2-4 nm.Compared with pure CdTe,the CdTe:Eu^3+ nanocrystals have larger band gap and thus exhibit blueshift in the emission spectra,which could be accounted for by the energy transfer between Eu^3+ and CdTe.To enhance the stability and functionality of CdTe:Eu3+nanocrystals,the CdTe:Eu3+nanocrystals were coated with SiO2 and the core-shell SiO2-coated CdTe:Eu3+nanocrystals(CdTe:Eu^3+@SiO2) were prepared via microemulsion method.TEM results show that CdTe:Eu3+nanocrystals are uniformly dispersed in the shell,and CdTe:Eu3+@SiO2 nanospheres are uniformly spherical with an average diameter of about 75 nm.The fluorescence emission of CdTe:Eu3+@SiO2(567 nm) shows a blueshift compared with that of CdTe:Eu^3+nanocrystals(632 nm),possibly because of altered surface properties after SiO2 coating.CdTe:Eu^3+and CdTe:Eu^3+@SiO2 with tunable photoluminescence are potentially useful in fabricating optical and bioimaging devices.
基金Supported by the Program for Changjiang Scholars and Innovative Research Team in University (PCSIR0818)Health Ministry Foundation of China (WKJ2005-2-003)Natural Science Foundation of Fujian Province (2008H0089 and 2009J01025)
文摘The anti-bacterial adhesion properties of TiO2-coated polymethyl methacrylate （PMMA） surfaces are investigated systematically. In detail, the adhesion of S. aureus （gram positive） and E. coli （gram negative） to TiO2-coated and uncoated PMMA surfaces are performed by the plate counting method. Afterwards, the adhesion free energy of bacteria on both supporting materials is quantified using the thermodynamic approach of Lifshitz van der Waals and acid/base interactions. The superior anti-adhesion capability of TiO2-coated PMMA is demonstrated when compared to native PMMA, both experimentally and theoretically.
基金Project(50802034) supported by the National Natural Science Foundation of ChinaProject(11A093) supported by the Key Project Foundation by the Education Department of Hunan Province,China
文摘TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to estimate activity of catalysts and determine the kinetics. And the effects of parameters including the initial concentration of AY, light intensity and TiO2 content in catalysts were examined. The results indicate that TAs has a higher efficiency in decomposition of AY than P25, pure TiO2 particles as well as the mixture of TiO2 powder and active carbon. The photocatalytic degradation rate is found to follow the pseudo-first order kinetics with respect to the AY concentration. The new kinetic model fairly resembles the classic Langmuir-Hinshelwood equation, and the rate constant is proportional to the square root of the light intensity in a wide range. However, its absorption performance depends on the surface areas of catalysts. The model fits quite well with the experimental data and elucidates phenomena about the effects of the TiO2 content in TAs on the degradation rate.
基金financially supported by the National Natural Science Foundation of China (No.20873046)the Specialized Research Fund for the Doctoral Program of HigherEducation (No.200805740004)Natural Science Foundation of Guangdong Province (No.10351063101000001)
文摘TiO2-coated SnO2 （TCS） hollow spheres, which are new anode materials for lithium ion （Li-ion） batteries, were prepared and characterized with X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, cyclic voltammetry （CV）, and galvanostatic charge/discharge tests. The results obtained from XRD, SEM, and TEM show that TiO2 can be uniforrrdy coated on the surface of SnO2 hollow spheres with the assistance of anionic surfactant. The cyclic voltammograms indicate that both TiO2 and SnO2 exhibit the activity for Li-ion storage. The charge/discharge tests show that the prepared TCS hollow spheres have a higher reversible coulomb efficiency and a better cycling stability than the uncoated SnO2 hollow spheres.
基金Supported by National Natural Science Foundation of China(Grant Nos.92160301,92060203,52175415,52205475)Science Center for Gas Turbine Project of China(Grant Nos.P2022-AB-IV-002-001,P2023-B-IV-003-001)+1 种基金Jiangsu Provincial Natural Science Foundation of China(Grant No.BK20210295)Graduate Research and Innovation Projects in Jiangsu Province of China(Grant No.KYCX22_0339).
文摘As an important green manufacturing process,dry grinding has problems such as high grinding temperature and insufficient cooling capacity.Aiming at the problems of sticking and burns in dry grinding of titanium alloys,grinding performance evaluation of molybdenum disulfide(MoS_(2))solid lubricant coated brazed cubic boron carbide(CBN)grinding wheel(MoS_(2)-coated CBN wheel)in dry grinding titanium alloys was carried out.The lubrication mechanism of MoS_(2)in the grinding process is analyzed,and the MoS_(2)-coated CBN wheel is prepared.The results show that the MoS_(2)solid lubricant can form a lubricating film on the ground surface and reduce the friction coefficient and grinding force.Within the experimental parameters,normal grinding force decreased by 42.5%,and tangential grinding force decreased by 28.1%.MoS_(2)lubricant can effectively improve the heat dissipation effect of titanium alloy grinding arc area.Compared with common CBN grinding wheel,MoS_(2)-coated CBN wheel has lower grinding temperature.When the grinding depth reaches 20μm,the grinding temperature decreased by 30.5%.The wear of CBN grains of grinding wheel were analyzed by mathematical statistical method.MoS_(2)lubricating coating can essentially decrease the wear of grains,reduce the adhesion of titanium alloy chip,prolong the service life of grinding wheel,and help to enhance the surface quality of workpiece.This research provides high-quality and efficient technical support for titanium alloy grinding.
基金Supported by the Project of Shanghai Committee of Science and Technology,China(Nos.1052nm00100,09ZR1437600)
文摘Several lithium-ion batteries of 18650-type were assembled with pristine or Al2O3-coated LiNi0.4Co0.2Mn0.4O2（NCM） as cathode material and mesocarbon microbeads（MCMB） as anode material.The cycling performance of the batteries was examined under 25 °C at a 2C rate within a potential range of 2.75―4.20 V.The changes of the crystal structure,the lattice parameter,the mean crystallite size,and the mean micro-strain of pristine NCM and Al2O3-coated NCM during the charge-discharge cycling were determined by X-ray diffraction（XRD）.The results indicate that the bulk structure of Al2O3-coated NCM is more stable than that of pristine NCM,which leads to the better cycling performance of Al2O3-coated NCM compared to that of pristine NCM.
