A Ge/Si（001） island multilayer structure is investigated by double crystal X-ray diffraction, transmission electron microscopy,and atomic force microscopy. We fit the satellite peaks in the rocking curve by two Lore...A Ge/Si（001） island multilayer structure is investigated by double crystal X-ray diffraction, transmission electron microscopy,and atomic force microscopy. We fit the satellite peaks in the rocking curve by two Lorentz lineshapes, which originate from the wetting layer region and the island region. Then from the ratio of the thick- nesses of the Si and Ge （GeSi） layers as determined by TEM,tbe Ge compositions of the wetting layer and islands are estimated to be about 0. 51 and 0. 67, respectively,according to the positions of the fitted peaks. This proves to be a relatively simple way to investigate the Ge/Si （001） island multilayer structure.展开更多
A series of Al-xSi-yGe filler metals(x=4–12 and y=10–40,wt%)were prepared,and the effect of Si and Ge on microstructure and melting characteristics of filler metals was studied.The thermodynamic model of Al-Si-Ge te...A series of Al-xSi-yGe filler metals(x=4–12 and y=10–40,wt%)were prepared,and the effect of Si and Ge on microstructure and melting characteristics of filler metals was studied.The thermodynamic model of Al-Si-Ge ternary alloy was established to analyze the phase formation mechanism of filler metals based on Miedema model,Tanaka model,and Toop equation.This research provided a basis for the composition optimization of filler metals and the analysis of metallurgical reaction process between filler metals and base materials.Results show that Al-Si-Ge alloy is composed of Al-Ge eutectic phase,Al-Si eutectic phase,and primary Si.Ge addition promotes the precipitation of primary Si.Ge is the main melting point depressant element of filler metals.With the increase in Ge content from 10wt%to 40wt%,the solid phase line of filler metals remains unchanged,whereas the liquidus temperature decreases from 567.65°C to 499.96°C.With the increase in Ge content of filler metal,Ge content in eutectic Si phase is increased,the endothermic peak of Al-Si eutectic reaction according to thermogravimetry curve becomes smoother,and Al-Si eutectic temperature is decreased.Ge addition can reduce the free energy of Al-Si alloy system.The lowest point of free energy is located on Al-Ge side.The eutectic Ge phase with the composition similar to pure Ge composition is the most likely to appear in the microstructure of filler metals,whereas the eutectic Si phase with the composition similar to pure Si composition is the least likely to appear.The thermodynamic calculation results are consistent with the experiment results.展开更多
Growth and ordering of coherently strained Ge-rich islands in Ge/Si single layer and multilayer systems and the influence of island arrangements on the evolutio n of the surface morphology of Si cap layers during depo...Growth and ordering of coherently strained Ge-rich islands in Ge/Si single layer and multilayer systems and the influence of island arrangements on the evolutio n of the surface morphology of Si cap layers during deposition by low-pressure c hemical vapour deposition(LPCVD) on Si(001) substrates at 700℃ have been invest igated by TEM of cross-section and plan-view specimens. At distances between the Ge layers of 35-50nm, vertical order of GeSi islands is observed for Ge-Si bila yer systems and for Ge-Si multilayer systems consisting of 5 layer pairs whereas lateral ordering parallel to <100> substrate directions is observed for the lat ter case only. In agreement with earlier results the vertical ordering in the mu ltilayer system can be understood as result of the elastic interaction between i sland nuclei forming in the layers with close islands in a buried layer below. T he lateral ordering along <100> may be attributed to the anisotropy of the elast ic interaction. Characteristic for all Si surfaces are the spatial correlation b etween the presence of island-induced lattice strain and the appearance of array s of larger square-shaped pyramids with distinct faceting and facet edges along <110>. The results reflect the importance of the control of growth parameters an d of the island-induced strain state for the evolution of the Si top layer surfa ce morphology during LPCVD growth.展开更多
The effect of deposition temperature on the morphology and optoelectronic performance of Ge/Si QDs grown by magnetron sputtering under low Ge deposition(~4 nm)was investigated by atomic force microscopy,Raman spectros...The effect of deposition temperature on the morphology and optoelectronic performance of Ge/Si QDs grown by magnetron sputtering under low Ge deposition(~4 nm)was investigated by atomic force microscopy,Raman spectroscopy,and photoluminescence(PL)tests.The experimental results indicate that temperatures higher than 750℃effectively increase the crystallization rate and surface smoothness of the Si buffer layer,and temperatures higher than 600℃significantly enhance the migration ability of Ge atoms,thus increasing the probability of Ge atoms meeting and nucleating to form QDs on Si buffer layer,but an excessively high temperature will cause the QDs to undergo an Ostwald ripening process and thus develop into super large islands.In addition,some PL peaks were observed in samples containing small-sized,high-density Ge QDs,the photoelectric properties reflected by these peaks were in good agreement with the corresponding structural characteristics of the grown QDs.Our results demonstrate the viability of preparing high-quality QDs by magnetron sputtering at high deposition rate,and the temperature effect is expected to work in conjunction with other controllable factors to further regulate QD growth,which paves an effective way for the industrial production of QDs that can be used in future devices.展开更多
The single event effect(SEE) sensitivity of silicon–germanium heterojunction bipolar transistor(Si Ge HBT) irradiated by 100-Me V proton is investigated. The simulation results indicate that the most sensitive positi...The single event effect(SEE) sensitivity of silicon–germanium heterojunction bipolar transistor(Si Ge HBT) irradiated by 100-Me V proton is investigated. The simulation results indicate that the most sensitive position of the Si Ge HBT device is the emitter center, where the protons pass through the larger collector-substrate(CS) junction. Furthermore, in this work the experimental studies are also carried out by using 100-Me V proton. In order to consider the influence of temperature on SEE, both simulation and experiment are conducted at a temperature of 93 K. At a cryogenic temperature, the carrier mobility increases, which leads to higher transient current peaks, but the duration of the current decreases significantly.Notably, at the same proton flux, there is only one single event transient(SET) that occurs at 93 K. Thus, the radiation hard ability of the device increases at cryogenic temperatures. The simulation results are found to be qualitatively consistent with the experimental results of 100-Me V protons. To further evaluate the tolerance of the device, the influence of proton on Si Ge HBT after gamma-ray(^(60)Coγ) irradiation is investigated. As a result, as the cumulative dose increases, the introduction of traps results in a significant reduction in both the peak value and duration of the transient currents.展开更多
Si/a-C:H(Ag)multilayer films with different modulation periods are prepared to test their potential applications in human body.The composition,microstructure,mechanical and tribological properties in the simulated bod...Si/a-C:H(Ag)multilayer films with different modulation periods are prepared to test their potential applications in human body.The composition,microstructure,mechanical and tribological properties in the simulated body fluid are investigated.The results show the concentration of Ag first decreases and then increases with the modulation period decreasing from 984 nm to 250 nm.Whereas the C content has an opposite variation trend.Notably,the concentration of Ag plays a more important role than the modulation period in the properties of the multilayer film.The a-C:H sublayer of the film with an appropriate Ag concentration(8.97 at.%)(modulation period of 512 nm)maintains the highest sp3/sp2 ratio,surface roughness and hardness,and excellent tribological property in the stimulated body fluid.An appropriate number of Ag atoms and size of Ag atom allow the Ag atoms to easily enter into the contact interface for load bearing and lubricating.This work proves that the Ag nanoparticles in the a-C:H sublayer plays a more important role in the tribological properties of the composite-multilayer film in stimulated body fluid condition.展开更多
We investigated the effects of Si-layer-thickness ratios on ultraviolet (UV) peak intensities of Si/ SiO2 multilayered films produced by alternately stacking several-nanometer-thick Si and SiO2 layers using radio-freq...We investigated the effects of Si-layer-thickness ratios on ultraviolet (UV) peak intensities of Si/ SiO2 multilayered films produced by alternately stacking several-nanometer-thick Si and SiO2 layers using radio-frequency sputtering for the first time. The Si-layer-thickness ratio of the Si/SiO2 film is a very important parameter for enhancing the peak intensity because the ratio is concerned with the size of Si nanocrystals in the film, which might affect the intensity of the UV light emission from the film. We prepared seven samples with various estimated Si-layer-thickness ratios, and measured the photoluminescence spectra of the samples after annealing at 1150°C, 1200°C, or 1250°C for 25 min. From our experiments, we estimate that the proper Si-layer-thickness ratio to obtain the strongest UV peaks from the Si/SiO2 multilayered films is around 0.29. Such a UV-lightemitting thin film is expected to be used in future higher-density optical-disk systems.展开更多
By direct observations of transmission electron microscopy (TEM), irreversible morphological transformations of as-deposited amorphous Au/Si multilayer (a-Au/a-Si) were observed on heating. The well arrayed sequence o...By direct observations of transmission electron microscopy (TEM), irreversible morphological transformations of as-deposited amorphous Au/Si multilayer (a-Au/a-Si) were observed on heating. The well arrayed sequence of the multilayer changed to zigzag layered structure at 478 K (=Tzig). Finally, the zigzag structure transformed to Au nanoparticles at 508 K. The distribution of the Au nanoparticles was random within the thin film. In situ X-ray diffraction during heating can clarify partial crystallization Si (c-Si) in the multilayer at 450 K (= ), which corresponds to metal induced crystallization (MIC) from amorphous Si (a-Si) accompanying by Au diffusion. On further heating, a-Au started to crystallize at around 480 K (=Tc) and gradually grew up to 3.2 nm in radius, although the volume of c-Si was almost constant. Continuous heating caused crystal Au (c-Au) melting into liquid AuSi (l-AuSi) at 600 K (= ), which was lower than bulk eutectic temperature ( ). Due to the AuSi eutectic effect, reversible phase transition between liquid and solid occurred once temperature is larger than . Proportionally to the maximum temperatures at each cycles (673, 873 and 1073 K), both and Au crystallization temperature approaches to . Using a thermodynamic theory of the nanoparticle formation in the eutectic system, the relationship between and the nanoparticle size is explained.展开更多
文摘A Ge/Si（001） island multilayer structure is investigated by double crystal X-ray diffraction, transmission electron microscopy,and atomic force microscopy. We fit the satellite peaks in the rocking curve by two Lorentz lineshapes, which originate from the wetting layer region and the island region. Then from the ratio of the thick- nesses of the Si and Ge （GeSi） layers as determined by TEM,tbe Ge compositions of the wetting layer and islands are estimated to be about 0. 51 and 0. 67, respectively,according to the positions of the fitted peaks. This proves to be a relatively simple way to investigate the Ge/Si （001） island multilayer structure.
基金National Natural Science Foundation of China(U22A20191)。
文摘A series of Al-xSi-yGe filler metals(x=4–12 and y=10–40,wt%)were prepared,and the effect of Si and Ge on microstructure and melting characteristics of filler metals was studied.The thermodynamic model of Al-Si-Ge ternary alloy was established to analyze the phase formation mechanism of filler metals based on Miedema model,Tanaka model,and Toop equation.This research provided a basis for the composition optimization of filler metals and the analysis of metallurgical reaction process between filler metals and base materials.Results show that Al-Si-Ge alloy is composed of Al-Ge eutectic phase,Al-Si eutectic phase,and primary Si.Ge addition promotes the precipitation of primary Si.Ge is the main melting point depressant element of filler metals.With the increase in Ge content from 10wt%to 40wt%,the solid phase line of filler metals remains unchanged,whereas the liquidus temperature decreases from 567.65°C to 499.96°C.With the increase in Ge content of filler metal,Ge content in eutectic Si phase is increased,the endothermic peak of Al-Si eutectic reaction according to thermogravimetry curve becomes smoother,and Al-Si eutectic temperature is decreased.Ge addition can reduce the free energy of Al-Si alloy system.The lowest point of free energy is located on Al-Ge side.The eutectic Ge phase with the composition similar to pure Ge composition is the most likely to appear in the microstructure of filler metals,whereas the eutectic Si phase with the composition similar to pure Si composition is the least likely to appear.The thermodynamic calculation results are consistent with the experiment results.
文摘Growth and ordering of coherently strained Ge-rich islands in Ge/Si single layer and multilayer systems and the influence of island arrangements on the evolutio n of the surface morphology of Si cap layers during deposition by low-pressure c hemical vapour deposition(LPCVD) on Si(001) substrates at 700℃ have been invest igated by TEM of cross-section and plan-view specimens. At distances between the Ge layers of 35-50nm, vertical order of GeSi islands is observed for Ge-Si bila yer systems and for Ge-Si multilayer systems consisting of 5 layer pairs whereas lateral ordering parallel to <100> substrate directions is observed for the lat ter case only. In agreement with earlier results the vertical ordering in the mu ltilayer system can be understood as result of the elastic interaction between i sland nuclei forming in the layers with close islands in a buried layer below. T he lateral ordering along <100> may be attributed to the anisotropy of the elast ic interaction. Characteristic for all Si surfaces are the spatial correlation b etween the presence of island-induced lattice strain and the appearance of array s of larger square-shaped pyramids with distinct faceting and facet edges along <110>. The results reflect the importance of the control of growth parameters an d of the island-induced strain state for the evolution of the Si top layer surfa ce morphology during LPCVD growth.
基金Founded by the National Key Research and Development Program(No.2021YFB3802400)the National Natural Science Foundation of China(No.52161037)the Basic Research Project of Yunnan Province(No.202001AU070112)。
文摘The effect of deposition temperature on the morphology and optoelectronic performance of Ge/Si QDs grown by magnetron sputtering under low Ge deposition(~4 nm)was investigated by atomic force microscopy,Raman spectroscopy,and photoluminescence(PL)tests.The experimental results indicate that temperatures higher than 750℃effectively increase the crystallization rate and surface smoothness of the Si buffer layer,and temperatures higher than 600℃significantly enhance the migration ability of Ge atoms,thus increasing the probability of Ge atoms meeting and nucleating to form QDs on Si buffer layer,but an excessively high temperature will cause the QDs to undergo an Ostwald ripening process and thus develop into super large islands.In addition,some PL peaks were observed in samples containing small-sized,high-density Ge QDs,the photoelectric properties reflected by these peaks were in good agreement with the corresponding structural characteristics of the grown QDs.Our results demonstrate the viability of preparing high-quality QDs by magnetron sputtering at high deposition rate,and the temperature effect is expected to work in conjunction with other controllable factors to further regulate QD growth,which paves an effective way for the industrial production of QDs that can be used in future devices.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.61574171,61704127,11875229,51872251,and 12027813)。
文摘The single event effect(SEE) sensitivity of silicon–germanium heterojunction bipolar transistor(Si Ge HBT) irradiated by 100-Me V proton is investigated. The simulation results indicate that the most sensitive position of the Si Ge HBT device is the emitter center, where the protons pass through the larger collector-substrate(CS) junction. Furthermore, in this work the experimental studies are also carried out by using 100-Me V proton. In order to consider the influence of temperature on SEE, both simulation and experiment are conducted at a temperature of 93 K. At a cryogenic temperature, the carrier mobility increases, which leads to higher transient current peaks, but the duration of the current decreases significantly.Notably, at the same proton flux, there is only one single event transient(SET) that occurs at 93 K. Thus, the radiation hard ability of the device increases at cryogenic temperatures. The simulation results are found to be qualitatively consistent with the experimental results of 100-Me V protons. To further evaluate the tolerance of the device, the influence of proton on Si Ge HBT after gamma-ray(^(60)Coγ) irradiation is investigated. As a result, as the cumulative dose increases, the introduction of traps results in a significant reduction in both the peak value and duration of the transient currents.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51801133,51505318,and 51671140)the Science and Technology Major Project of Shanxi Province,China(Grant No.20181102013)+1 种基金the Shanxi Provincial Youth Fund,China(Grant No.201801D221135)the“1331 Project”Engineering Research Center of Shanxi Province,China(Grant No.PT201801).
文摘Si/a-C:H(Ag)multilayer films with different modulation periods are prepared to test their potential applications in human body.The composition,microstructure,mechanical and tribological properties in the simulated body fluid are investigated.The results show the concentration of Ag first decreases and then increases with the modulation period decreasing from 984 nm to 250 nm.Whereas the C content has an opposite variation trend.Notably,the concentration of Ag plays a more important role than the modulation period in the properties of the multilayer film.The a-C:H sublayer of the film with an appropriate Ag concentration(8.97 at.%)(modulation period of 512 nm)maintains the highest sp3/sp2 ratio,surface roughness and hardness,and excellent tribological property in the stimulated body fluid.An appropriate number of Ag atoms and size of Ag atom allow the Ag atoms to easily enter into the contact interface for load bearing and lubricating.This work proves that the Ag nanoparticles in the a-C:H sublayer plays a more important role in the tribological properties of the composite-multilayer film in stimulated body fluid condition.
文摘We investigated the effects of Si-layer-thickness ratios on ultraviolet (UV) peak intensities of Si/ SiO2 multilayered films produced by alternately stacking several-nanometer-thick Si and SiO2 layers using radio-frequency sputtering for the first time. The Si-layer-thickness ratio of the Si/SiO2 film is a very important parameter for enhancing the peak intensity because the ratio is concerned with the size of Si nanocrystals in the film, which might affect the intensity of the UV light emission from the film. We prepared seven samples with various estimated Si-layer-thickness ratios, and measured the photoluminescence spectra of the samples after annealing at 1150°C, 1200°C, or 1250°C for 25 min. From our experiments, we estimate that the proper Si-layer-thickness ratio to obtain the strongest UV peaks from the Si/SiO2 multilayered films is around 0.29. Such a UV-lightemitting thin film is expected to be used in future higher-density optical-disk systems.
文摘By direct observations of transmission electron microscopy (TEM), irreversible morphological transformations of as-deposited amorphous Au/Si multilayer (a-Au/a-Si) were observed on heating. The well arrayed sequence of the multilayer changed to zigzag layered structure at 478 K (=Tzig). Finally, the zigzag structure transformed to Au nanoparticles at 508 K. The distribution of the Au nanoparticles was random within the thin film. In situ X-ray diffraction during heating can clarify partial crystallization Si (c-Si) in the multilayer at 450 K (= ), which corresponds to metal induced crystallization (MIC) from amorphous Si (a-Si) accompanying by Au diffusion. On further heating, a-Au started to crystallize at around 480 K (=Tc) and gradually grew up to 3.2 nm in radius, although the volume of c-Si was almost constant. Continuous heating caused crystal Au (c-Au) melting into liquid AuSi (l-AuSi) at 600 K (= ), which was lower than bulk eutectic temperature ( ). Due to the AuSi eutectic effect, reversible phase transition between liquid and solid occurred once temperature is larger than . Proportionally to the maximum temperatures at each cycles (673, 873 and 1073 K), both and Au crystallization temperature approaches to . Using a thermodynamic theory of the nanoparticle formation in the eutectic system, the relationship between and the nanoparticle size is explained.
