The effect of Sr on modification and refinement of the Mg 2 Si phase in an AZ61-0.7Si magnesium alloy has been investigated and analyzed.The results indicate that Sr can effectively modify and refine the Chinese-scrip...The effect of Sr on modification and refinement of the Mg 2 Si phase in an AZ61-0.7Si magnesium alloy has been investigated and analyzed.The results indicate that Sr can effectively modify and refine the Chinese-script shaped Mg2Si phase in the AZ61-0.7Si alloy.By adding 0.06wt.%-0.12wt.%Sr to AZ61-0.7Si alloy,the Mg2Si phase in the alloy can be changed from the initial coarse Chinese-script shape to fine granule and/or irregular polygonal shapes.Accordingly,the Sr-containing AZ61-0.7Si alloy exhibits higher tensile and creep properties than the AZ61-0.7Si alloy without Sr modification.The mechanism on modification and refinement of the Mg2Si phase in Sr-containing AZ61-0.7Si alloy is possibly related to the following two aspects:(1)adding Sr may form the Al4Sr phase which can serve as the heterogeneous nucleus for the Mg2Si particles and/or(2)adding Sr may lower the onset crystallizing temperature and increase the undercooling level.展开更多
The effects of Sb and Sr on the modification and refinement of Mg17Al12 and Mg2Si phases in Mg- 12Al-0.7Si alloy were investigated and compared. The microstructure and mechanical properties of Mg-12Al0.7Si alloy and i...The effects of Sb and Sr on the modification and refinement of Mg17Al12 and Mg2Si phases in Mg- 12Al-0.7Si alloy were investigated and compared. The microstructure and mechanical properties of Mg-12Al0.7Si alloy and its modification mechanism by Sb and Sr were investigated using a scanning electron microscope （SEM）, an energy dispersive spectrometer （EDS）, X-ray diffraction （XRD） and differential thermal analysis （DTA）. The results indicate that by adding 0.5wt.% Sb to the Mg-12Al-0.7Si alloy, the Mg17Al12 phase was refined and broken into some discontinuous island structures. However, some network Mg17Al12 phases still can be detected in Mg-12Al-0.7Si-0.09Sr alloy. Therefore, Sb performs better in modification and refinement of Mg17Al12 phase than does Sr. Small amounts of fine polygonal shaped Mg2Si phases were found in Mg-12AI-0.7Si-0.5Sb alloy, while the morphology of Mg2Si phases in Mg-12Al-0.7Si-0.09Sr alloy changed from the coarse Chinese script shapes to fine granule and irregular polygonal shapes, indicating that the effects of modification and refinement on Mg2Si phase are more significant by adding 0.09wt.% Sr than 0.5wt.% Sb. The ultimate tensile strengths of the Sb and Sr modified Mg-12Al-0.7Si alloys were considerably increased both at room temperature and at 200 ℃.展开更多
Alumina/aluminum-silicon alloy composite is manufactured by squeeze casting. The effect of the reinforcementon the morphology of the silicon phase in aluminum-silicon alloy is studied. The results indicate that an alu...Alumina/aluminum-silicon alloy composite is manufactured by squeeze casting. The effect of the reinforcementon the morphology of the silicon phase in aluminum-silicon alloy is studied. The results indicate that an alumina fiber canserve as propitious sites for the heterogeneous nucleation of the silicon phase, and the primary silicon in the compositecan nucleate on the surface of the fiber. The fiber in the composite can trigger twin during the coupled growth of thealuminum-silicon eutectic and lead to modification of the eutectic silicon near the fiber.展开更多
The thermodynamic calculation of phase equilibria in the Cu-Ni-Si alloy system was carried out using the CALPHAD method. The calculations show that there are three two-phase areas and two three-phase areas in the Cu-r...The thermodynamic calculation of phase equilibria in the Cu-Ni-Si alloy system was carried out using the CALPHAD method. The calculations show that there are three two-phase areas and two three-phase areas in the Cu-rich parts of the isothermal section of the phase diagram at 300-600 ℃,and the three two-phase areas are FCC-A1(Cu-rich)+γ-Ni5Si2,FCC-A1(Cu-rich)+δ-Ni2Si and FCC-A1(Cu-rich)+ε-Ni3Si2,two three-phase areas are FCC-A1(Cu-rich)+γ-Ni5Si2+δ-Ni2Si and FCC-A1(Cu-rich)+δ-Ni2Si+ε-Ni3Si2. For this reason,an alloy located in the Cu-rich portion may precipitate γ-Ni5Si2,δ-Ni2Si or ε-Ni3Si2;the proportion of each phase depends on the alloy composition and aging temperature. The transmission electron microscope analysis of the Cu-3.2Ni-0.75Si alloy indicates that the precipitates are mainly δ-Ni2Si with only a few γ-Ni5Si2 phase particles,which agrees well with the thermodynamic calculations of phase equilibria.展开更多
The study systematically investigated the effects of master alloy addition containing rare earth elements La and Yb on the microstructures characteristic and tensile properties of A1Sil0Cu3 alloy. It was studied by me...The study systematically investigated the effects of master alloy addition containing rare earth elements La and Yb on the microstructures characteristic and tensile properties of A1Sil0Cu3 alloy. It was studied by means of optical microscopy, X-ray diffraction, scanning electron microscopy, energy diffraction spectnam and differential thermal analyzer. The results showed that the ad-dition of （La＋Yb） obviously reduced the sizes of the primary a-Al phase and eutectic Si particles as well as 13-A15FeSi phase and im- proved the morphology of the primary a-A1 phase and eutectic Si particles. The optimum addition of（La＋Yb） addition was 0.6 wt.%. Comparing the 0.6 wt.% （La＋Yb） modified A1Sil0Cu3 alloy with the unmodified alloy, it was found that the mean diameter, mean area and SADS of primary a-A1 phase were decreased by 50.80%, 75.74% and 50.83% respectively; the aspect ratio, size （length） and mean area of eutectic Si particles were decreased by 66.30%, 81.78% and 78.99%, respectively, and the average size of the β-AlsFeSi phase was 16.4 pro. In addition, the addition of （La＋Yb） greatly improved the tensile properties ofA1Si 10Cu3 alloy, especially in the ultimate tensile strength and elongation as a result of the significant improvement in microstructure.展开更多
Using an optical microscope and scanning electron microscope (SEM), the variation of eutectic Si morphology of Al-Si alloy in solution treatment was observed to study its influence on mechanical properties and fractur...Using an optical microscope and scanning electron microscope (SEM), the variation of eutectic Si morphology of Al-Si alloy in solution treatment was observed to study its influence on mechanical properties and fracture behavior. The results show that eutectic Si undergoes stubbing, necking, fragmentation, and growth in the initial stage (250 min); in the middle solution stage (250 to 400 min), the eutectic Si morphology has no significant change, only the degree of spheroidizing becomes higher; after 600 min, the growth of eutectic Si is a coarsening process controlled by diffusion and follows the Liftshitz-Slyozov-Wangner (LSW) model, and the eutectic Si morphology deteriorates due to the occurrence of facets and lap. Based on the quantitative measure and regression analysis, the eutectic Si morphology has a remarkable influence on mechanical properties and fracture behavior.展开更多
The effect of Mg/Si mass ratio on the microstructure and mechanical properties of Al-Mg-Si cast aluminum alloys under sub-rapid solidification conditions was investigated.This study utilized four different Mg/Si ratio...The effect of Mg/Si mass ratio on the microstructure and mechanical properties of Al-Mg-Si cast aluminum alloys under sub-rapid solidification conditions was investigated.This study utilized four different Mg/Si ratios:2.83,1.91,1.73,and 1.53.To analyze the evolution of the microstructure,particularly the second phase,various techniques were employed:optical microscopy(OM),scanning electron microscopy(SEM),energy dispersive spectrometry(EDS),and electron backscatter diffraction(EBSD).Additionally,thermodynamic calculations were performed using the Thermal-calc software to further understand the microstructural changes.Results show that as the Mg/Si ratio decreases from 2.83 to 1.53,α-Al grains become more uniformly distributed.Meanwhile,the morphology of the Mg_(2)Si phases changes from skeletal to short stick shapes with a decreasing aspect ratio.An as-cast Al-Mg-Si alloy with a Mg/Si ratio of 1.53 exhibits high strength,achieving an ultimate tensile strength(UTS)of 320.6 MPa and a yield strength(YS)of 249.9 MPa.The cast alloy with a Mg/Si ratio of 2.83exhibits the highest elongation,reaching 5.31%.This superior elongation is attributed to the uniform distribution of Mg_(2)Si phases,which possess a long skeletal shape.Conversely,the alloy with a Mg/Si ratio of 1.53 demonstrates the lowest elongation,primarily due to the central concentration of Mg_(2)Si phases,which are characterized by their short stick shapes.展开更多
Analysis of the Si and AI phases in coal gangue fuel and its ash is important for use of coal gangue ashes. A comprehensive study by theoretical and experimental analyses with differential thermal analysis, X-ray diff...Analysis of the Si and AI phases in coal gangue fuel and its ash is important for use of coal gangue ashes. A comprehensive study by theoretical and experimental analyses with differential thermal analysis, X-ray diffraction and Infrared Spectroscopy has been made in the present article to explore the diagram of the Si and Al phases in coal gangue fuel and its ashes. It is found that kaolinite and quartz are the main phases in coal gangue fuel. The ratio of moles A1203 to SiO2 （i.e., Al2O3 （mole） / SiO2 （mole）） is usually no more than 0.5 in most coal gangue fuel and its ashes. The kaolinit at about 984℃ releases a large quantity of SiO2, which makes calcine coal gangue more active than coal gangue itself. The relationship between the ratio A1203 （mole）]SiO2（mole）and the components of coal gangue ash is analyzed, resulting in a formula to calculate the quantity of each phase. Applying the formula to the testing samples from an electric plant in north China supports the above conclusions.展开更多
基金supported by the National Natural Science Funds for Distinguished Young Scholar in China(No.50725413)the Major State Basic Research Development Program of China(973)(No.2007CB613704)+1 种基金the Natural Science Foundation Project of CQ CSTC(No.2007BB4400)Chongqing Science and Technology Commission in China(No.2006AA4012-9-6).
文摘The effect of Sr on modification and refinement of the Mg 2 Si phase in an AZ61-0.7Si magnesium alloy has been investigated and analyzed.The results indicate that Sr can effectively modify and refine the Chinese-script shaped Mg2Si phase in the AZ61-0.7Si alloy.By adding 0.06wt.%-0.12wt.%Sr to AZ61-0.7Si alloy,the Mg2Si phase in the alloy can be changed from the initial coarse Chinese-script shape to fine granule and/or irregular polygonal shapes.Accordingly,the Sr-containing AZ61-0.7Si alloy exhibits higher tensile and creep properties than the AZ61-0.7Si alloy without Sr modification.The mechanism on modification and refinement of the Mg2Si phase in Sr-containing AZ61-0.7Si alloy is possibly related to the following two aspects:(1)adding Sr may form the Al4Sr phase which can serve as the heterogeneous nucleus for the Mg2Si particles and/or(2)adding Sr may lower the onset crystallizing temperature and increase the undercooling level.
基金financially supported by the National Natural Science Foundation of China(Grant nos.:51301118,51404166)the Projects of International Cooperation in Shanxi province,China(Grant no.:2014081002)and the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi province,China(Grant nos.:2013108,2014120)
文摘The effects of Sb and Sr on the modification and refinement of Mg17Al12 and Mg2Si phases in Mg- 12Al-0.7Si alloy were investigated and compared. The microstructure and mechanical properties of Mg-12Al0.7Si alloy and its modification mechanism by Sb and Sr were investigated using a scanning electron microscope （SEM）, an energy dispersive spectrometer （EDS）, X-ray diffraction （XRD） and differential thermal analysis （DTA）. The results indicate that by adding 0.5wt.% Sb to the Mg-12Al-0.7Si alloy, the Mg17Al12 phase was refined and broken into some discontinuous island structures. However, some network Mg17Al12 phases still can be detected in Mg-12Al-0.7Si-0.09Sr alloy. Therefore, Sb performs better in modification and refinement of Mg17Al12 phase than does Sr. Small amounts of fine polygonal shaped Mg2Si phases were found in Mg-12AI-0.7Si-0.5Sb alloy, while the morphology of Mg2Si phases in Mg-12Al-0.7Si-0.09Sr alloy changed from the coarse Chinese script shapes to fine granule and irregular polygonal shapes, indicating that the effects of modification and refinement on Mg2Si phase are more significant by adding 0.09wt.% Sr than 0.5wt.% Sb. The ultimate tensile strengths of the Sb and Sr modified Mg-12Al-0.7Si alloys were considerably increased both at room temperature and at 200 ℃.
文摘Alumina/aluminum-silicon alloy composite is manufactured by squeeze casting. The effect of the reinforcementon the morphology of the silicon phase in aluminum-silicon alloy is studied. The results indicate that an alumina fiber canserve as propitious sites for the heterogeneous nucleation of the silicon phase, and the primary silicon in the compositecan nucleate on the surface of the fiber. The fiber in the composite can trigger twin during the coupled growth of thealuminum-silicon eutectic and lead to modification of the eutectic silicon near the fiber.
基金Project(2006DFB53050) supported by the International Science and Technology Cooperation Project of the Science and Technology Ministry of China
文摘The thermodynamic calculation of phase equilibria in the Cu-Ni-Si alloy system was carried out using the CALPHAD method. The calculations show that there are three two-phase areas and two three-phase areas in the Cu-rich parts of the isothermal section of the phase diagram at 300-600 ℃,and the three two-phase areas are FCC-A1(Cu-rich)+γ-Ni5Si2,FCC-A1(Cu-rich)+δ-Ni2Si and FCC-A1(Cu-rich)+ε-Ni3Si2,two three-phase areas are FCC-A1(Cu-rich)+γ-Ni5Si2+δ-Ni2Si and FCC-A1(Cu-rich)+δ-Ni2Si+ε-Ni3Si2. For this reason,an alloy located in the Cu-rich portion may precipitate γ-Ni5Si2,δ-Ni2Si or ε-Ni3Si2;the proportion of each phase depends on the alloy composition and aging temperature. The transmission electron microscope analysis of the Cu-3.2Ni-0.75Si alloy indicates that the precipitates are mainly δ-Ni2Si with only a few γ-Ni5Si2 phase particles,which agrees well with the thermodynamic calculations of phase equilibria.
基金supported by the National Natural Science Foundation of China(51364035,51165032)Ministry of Education tied up with the Special Research Fund for the Doctoral Program for Higher School(20133601110001)Loading Program of Science and Technology of College of Jiangxi Province(KJLD14003)
文摘The study systematically investigated the effects of master alloy addition containing rare earth elements La and Yb on the microstructures characteristic and tensile properties of A1Sil0Cu3 alloy. It was studied by means of optical microscopy, X-ray diffraction, scanning electron microscopy, energy diffraction spectnam and differential thermal analyzer. The results showed that the ad-dition of （La＋Yb） obviously reduced the sizes of the primary a-Al phase and eutectic Si particles as well as 13-A15FeSi phase and im- proved the morphology of the primary a-A1 phase and eutectic Si particles. The optimum addition of（La＋Yb） addition was 0.6 wt.%. Comparing the 0.6 wt.% （La＋Yb） modified A1Sil0Cu3 alloy with the unmodified alloy, it was found that the mean diameter, mean area and SADS of primary a-A1 phase were decreased by 50.80%, 75.74% and 50.83% respectively; the aspect ratio, size （length） and mean area of eutectic Si particles were decreased by 66.30%, 81.78% and 78.99%, respectively, and the average size of the β-AlsFeSi phase was 16.4 pro. In addition, the addition of （La＋Yb） greatly improved the tensile properties ofA1Si 10Cu3 alloy, especially in the ultimate tensile strength and elongation as a result of the significant improvement in microstructure.
文摘Using an optical microscope and scanning electron microscope (SEM), the variation of eutectic Si morphology of Al-Si alloy in solution treatment was observed to study its influence on mechanical properties and fracture behavior. The results show that eutectic Si undergoes stubbing, necking, fragmentation, and growth in the initial stage (250 min); in the middle solution stage (250 to 400 min), the eutectic Si morphology has no significant change, only the degree of spheroidizing becomes higher; after 600 min, the growth of eutectic Si is a coarsening process controlled by diffusion and follows the Liftshitz-Slyozov-Wangner (LSW) model, and the eutectic Si morphology deteriorates due to the occurrence of facets and lap. Based on the quantitative measure and regression analysis, the eutectic Si morphology has a remarkable influence on mechanical properties and fracture behavior.
基金supported by the WQ&UCS (Binzhou)Industrialization Research Institute。
文摘The effect of Mg/Si mass ratio on the microstructure and mechanical properties of Al-Mg-Si cast aluminum alloys under sub-rapid solidification conditions was investigated.This study utilized four different Mg/Si ratios:2.83,1.91,1.73,and 1.53.To analyze the evolution of the microstructure,particularly the second phase,various techniques were employed:optical microscopy(OM),scanning electron microscopy(SEM),energy dispersive spectrometry(EDS),and electron backscatter diffraction(EBSD).Additionally,thermodynamic calculations were performed using the Thermal-calc software to further understand the microstructural changes.Results show that as the Mg/Si ratio decreases from 2.83 to 1.53,α-Al grains become more uniformly distributed.Meanwhile,the morphology of the Mg_(2)Si phases changes from skeletal to short stick shapes with a decreasing aspect ratio.An as-cast Al-Mg-Si alloy with a Mg/Si ratio of 1.53 exhibits high strength,achieving an ultimate tensile strength(UTS)of 320.6 MPa and a yield strength(YS)of 249.9 MPa.The cast alloy with a Mg/Si ratio of 2.83exhibits the highest elongation,reaching 5.31%.This superior elongation is attributed to the uniform distribution of Mg_(2)Si phases,which possess a long skeletal shape.Conversely,the alloy with a Mg/Si ratio of 1.53 demonstrates the lowest elongation,primarily due to the central concentration of Mg_(2)Si phases,which are characterized by their short stick shapes.
基金part of a key project carried out during 2006-2008supported by the National Postdoct Foundation of China (No.20070420417)the Project of the Yunxi Corporation (2007-13A)
文摘Analysis of the Si and AI phases in coal gangue fuel and its ash is important for use of coal gangue ashes. A comprehensive study by theoretical and experimental analyses with differential thermal analysis, X-ray diffraction and Infrared Spectroscopy has been made in the present article to explore the diagram of the Si and Al phases in coal gangue fuel and its ashes. It is found that kaolinite and quartz are the main phases in coal gangue fuel. The ratio of moles A1203 to SiO2 （i.e., Al2O3 （mole） / SiO2 （mole）） is usually no more than 0.5 in most coal gangue fuel and its ashes. The kaolinit at about 984℃ releases a large quantity of SiO2, which makes calcine coal gangue more active than coal gangue itself. The relationship between the ratio A1203 （mole）]SiO2（mole）and the components of coal gangue ash is analyzed, resulting in a formula to calculate the quantity of each phase. Applying the formula to the testing samples from an electric plant in north China supports the above conclusions.
