A two-dimensional Reynolds-averaged Navier-Stokes solver is applied to analyze the aerodynamic behavior of the Shock/Boundary-Layer interaction of rocket with a boosted The K-ε turbulence model and a finite volume m...A two-dimensional Reynolds-averaged Navier-Stokes solver is applied to analyze the aerodynamic behavior of the Shock/Boundary-Layer interaction of rocket with a boosted The K-ε turbulence model and a finite volume method in a unstructured body-fitted curvilinear coordinates have been used. The results indicate that the separation and the reattachment occur in the Boundary-Layer of the main rocket because of the shock interaction. The shape of the booster nose effects the flow field obviously. In the case of the hemisphere booster nose the pressure has complicate distributions and the separation is very clear. The distance between the booster and main rocket has the evident effect on the flow field. If the distance is smaller the pressure coefficient is bigger the separation zone even the separation bubble occurs.展开更多
The efficiency and mechanism of an active control device ＂＇Spark Jet＂ and its application in shock-induced separation control are studied using large-eddy simulation in this paper. The base flow is the interaction ...The efficiency and mechanism of an active control device ＂＇Spark Jet＂ and its application in shock-induced separation control are studied using large-eddy simulation in this paper. The base flow is the interaction of an oblique shock-wave generated by 8° wedge and a spatially-developing Ma = 2.3 turbulent boundary layer. The Reynolds number based on the incoming flow property and the boundary layer displacement thickness at the impinging point without shock-wave is 20000. The detailed numerical approaches were presented. The inflow turbulence was generated using the digital filter method to avoid artificial temporal or streamwise periodicity. The , merical results including velocity profile, Reynolds stress profile, skin friction, and wall pressure were sys- tematically validated against the available wind tunnel particle image velocimetry （PIV） measure- ments of the same flow condition. Further study on the control of flow separation due to the strong shock-viscous interaction using an active control actuator ＂＇Spark Jet＇＂ was conducted. The single-pulsed characteristic of the device was obtained and compared with the experiment. Both instantaneous and time-averaged flow fields have shown that the jet flow issuing from the actuator cavity enhances the flow mixing inside the boundary layer, making the boundary layer more resis- tant to flow separation. Skin friction coefficient distribution shows that the separation bubble length is reduced by about 35% with control exerted.展开更多
It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development ...It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development of turbulent kinetic energy in impinging shock-wave/turbulent bound- ary layer interaction flow at Mach 2.25 is analyzed based on the data of direct numerical simulation （DNS）. It is found that the turbulent kinetic energy is amplified by strong shear in the separation zone and the adverse pressure gradient near the separation point. The pressure gradient was non-dimensionalised with local density, velocity, and viscosity. Spalart Allmaras （S A） model is modified by introducing the non-dimensional pressure gradient into the production term of the eddy viscosity transportation equation. Simulation results show that the production and dissipation of eddy viscosity are strongly enhanced by the modification of S-A model. Compared with DNS and experimental data, the wall pressure and the wall skin friction coefficient as well as the velocity profile of the modified S-A model are obviously improved. Thus it can be concluded that the mod- ification of S-A model with the pressure gradient can improve the predictive accuracy for simulat- ing the shock-wave/turbulent boundary laver interaction.展开更多
Accurate prediction of Shock-Wave/Boundary Layer Interaction(SWBLI)flows has been a persistent challenge for linear eddy viscosity models.A major limitation lies in the isotropic representation of the Reynolds stress,...Accurate prediction of Shock-Wave/Boundary Layer Interaction(SWBLI)flows has been a persistent challenge for linear eddy viscosity models.A major limitation lies in the isotropic representation of the Reynolds stress,as assumed under the Boussinesq approximation.Recent studies have shown promise in improving the prediction capability for incompressible separation flows by perturbing the Reynolds-stress anisotropy tensor.However,it remains uncertain whether this approach is effective for SWBLI flows,which involve compressibility and discontinuity.To address this issue,this study systematically quantifies the structural uncertainty of the anisotropy for oblique SWBLI flows.The eigenspace perturbation method is applied to perturb the anisotropy tensor predicted by the Menter Shear–Stress Transport(SST)model and reveal the impacts of anisotropy on the prediction of quantities of interest,such as separation and reattachment positions,wall static pressure,skin friction,and heat flux.The results demonstrate the potential and reveal the challenges of eigenspace perturbation in improving the SST model.Furthermore,a detailed analysis of turbulent characteristics is performed to identify the source of uncertainty.The findings indicate that eigenspace perturbation primarily affects turbulent shear stress,while the prediction error of the SST model is more related to turbulent kinetic energy.展开更多
Experimental and numerical investigations were conducted to investigate the variations of shock-wave boundary layer interaction(SBLI) phenomena in a highly loaded transonic compressor cascade with Mach numbers.The sch...Experimental and numerical investigations were conducted to investigate the variations of shock-wave boundary layer interaction(SBLI) phenomena in a highly loaded transonic compressor cascade with Mach numbers.The schlieren technique was used to observe the shock structure in the cascade and the pressure tap method to measure the pressure distribution on the blade surface.The unsteady pressure distribution on blade surface was measured with the fast-response pressure-sensitive paint(PSP) technique to obtain the unsteady pressure distribution on the whole blade surface and to capture the shock oscillation characteristics caused by SBLI.In addition,the Reynolds Averaged Navier Stokes simulations were used to compute the three-dimensional steady flow field in the transonic cascade.It was found that the shock wave patterns and behaviors are affected evidently with the increase in incoming Mach number at the design flow angle,especially with the presence of the separation bubble caused by SBLI.The time-averaged pressure distribution on the blade surface measured by PSP technique showed a symmetric pressure filed at Mach numbers of 0.85,while the pressure field on the blade surface was an asymmetric one at Mach numbers of 0.90 and 0.95.The oscillation of the shock wave was closely with the flow separation bubble on the blade surface and could transverse over nearly one interval of the pressure taps.The oscillation of the shock wave may smear the pressure jump phenomenon measured by the pressure taps.展开更多
This paper describes a theoretical method for reconstruction of the skin friction topology in complex separated flows,which is developed based on the exact relation between skin friction and surface pressure through t...This paper describes a theoretical method for reconstruction of the skin friction topology in complex separated flows,which is developed based on the exact relation between skin friction and surface pressure through the boundary enstrophy flux(BEF).The key of this method is that a skin friction field is reconstructed from a surface pressure field as an inverse problem by applying a variational method.For applications,the approximate method is proposed,where the composite surface pressure field is given by a linear superposition of the base-flow surface pressure field and the surface pressure variation field and the base-flow BEF field is used as the first-order approximation.This approximate method is constructive in a mathematical sense since a complex skin friction field in separated flows can be reconstructed from some elemental skin friction structures(skin friction source/sink,vortex and their combinations)by a linear superposition of some simple surface pressure structures.The distinct topological features,such as critical points,separation lines and attachment lines,naturally occur as a result of such reconstruction.As examples,some elemental skin friction structures in separated flows are reconstructed in simulations,and the skin friction fields in shock-wave/boundary-layer interactions(SWBLIs)are reconstructed from pressure sensitive paint(PSP)images obtained in wind tunnel experiments.展开更多
Flows around vortex generators(VGs),which serve as one of the important flow control methods,are investigated by solving Reynolds-averaged Navier-Stokes(RANS)equations.The influences on the main flow of VGs are intend...Flows around vortex generators(VGs),which serve as one of the important flow control methods,are investigated by solving Reynolds-averaged Navier-Stokes(RANS)equations.The influences on the main flow of VGs are intended to explore.Firstly, the flow around a single VG on a flat plane is computed to validate the schemes and to acquire basic knowledge of this kind of flow.Secondly,transonic flow past a standard model,named by ONERA-M6 wing,is predicted to investigate the flow features of shockwave/boundary-layer interactions(SWBLI).Thirdly,the effects of a row of VGs mounted about 25%local chord on a supercritical wing are analyzed in transonic condition with strong SWBLI.Lastly,VGs are mounted more upwind(about 3.5%local chord)to explore the effects at low speed and high incidence condition.The numerical results show that seven VGs can effectively suppress the separations behind the strong SWBLI and decrease spanwise flow and wing-tip vortex in transonic condition.VGs also can decrease the large scope of separation over the wing at low speed with high angle of attack.展开更多
A two-dimensional Reynolds averaged Navier Stokes(RANS)simulation of a dual mode ramjet(DMRJ)combustor is performed,modeling the University of Michigan dual-mode combustor experimental setup operating in reacting mode...A two-dimensional Reynolds averaged Navier Stokes(RANS)simulation of a dual mode ramjet(DMRJ)combustor is performed,modeling the University of Michigan dual-mode combustor experimental setup operating in reacting mode with different equivalence ratios(4).The simulations are carried out using a k-u SST turbulence model and a steady diffusion flamelet model for non-premixed combustion.Air enters the isolator at Mach 2.2,stagnation pressure and temperature of 549.2 kPa and 1400 K respectively.Hydrogen is injected transverse to the flow direction and upstream of the cavity flame holder to simulate ramjet(4 Z 0.29)and scramjet(4 Z 0.19)modes of operation.Wall static pressure plots are used to validate numerical results against experimental data.Analysis of flow separation in ramjet mode due to the presence of a shock train in the isolator is carried out by means of numerical Schlieren images overlapped with contours of negative axial velocity,showing the effects of shock wave boundary layer interaction(SWBLI).Active control through wall normal boundary layer bleed in the separated flow region is implemented,which weakens the shock train and moves it downstream closer to the cavity.Bleed results in an improved stagnation pressure recovery in ramjet mode,with a marginal increase in combustion efficiency.展开更多
文摘A two-dimensional Reynolds-averaged Navier-Stokes solver is applied to analyze the aerodynamic behavior of the Shock/Boundary-Layer interaction of rocket with a boosted The K-ε turbulence model and a finite volume method in a unstructured body-fitted curvilinear coordinates have been used. The results indicate that the separation and the reattachment occur in the Boundary-Layer of the main rocket because of the shock interaction. The shape of the booster nose effects the flow field obviously. In the case of the hemisphere booster nose the pressure has complicate distributions and the separation is very clear. The distance between the booster and main rocket has the evident effect on the flow field. If the distance is smaller the pressure coefficient is bigger the separation zone even the separation bubble occurs.
基金supported by the National Natural Science Foundation of China(Nos.11302012,51420105008,51476004,11572025 and 51136003)the National Basic Research Program of China(No.2012CB720205)The computational time for the present study was provided by the UK Turbulence Consortium(EPSRC grant EP/L000261/1)
文摘The efficiency and mechanism of an active control device ＂＇Spark Jet＂ and its application in shock-induced separation control are studied using large-eddy simulation in this paper. The base flow is the interaction of an oblique shock-wave generated by 8° wedge and a spatially-developing Ma = 2.3 turbulent boundary layer. The Reynolds number based on the incoming flow property and the boundary layer displacement thickness at the impinging point without shock-wave is 20000. The detailed numerical approaches were presented. The inflow turbulence was generated using the digital filter method to avoid artificial temporal or streamwise periodicity. The , merical results including velocity profile, Reynolds stress profile, skin friction, and wall pressure were sys- tematically validated against the available wind tunnel particle image velocimetry （PIV） measure- ments of the same flow condition. Further study on the control of flow separation due to the strong shock-viscous interaction using an active control actuator ＂＇Spark Jet＇＂ was conducted. The single-pulsed characteristic of the device was obtained and compared with the experiment. Both instantaneous and time-averaged flow fields have shown that the jet flow issuing from the actuator cavity enhances the flow mixing inside the boundary layer, making the boundary layer more resis- tant to flow separation. Skin friction coefficient distribution shows that the separation bubble length is reduced by about 35% with control exerted.
基金supported by the National Natural Science Foundation of China (No.11302012,51376001,51136003)the National Basic Research Program of China (No.2012CB720205)+3 种基金the National Magnetic Confinement Fusion Research Program of China (No.2012GB102006)the Aeronautical Science Foundation of China (No.2012ZB51014)the ‘‘111’’ Project(No.B08009)the Astronautical Technology Innovation Foundation of China
文摘It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development of turbulent kinetic energy in impinging shock-wave/turbulent bound- ary layer interaction flow at Mach 2.25 is analyzed based on the data of direct numerical simulation （DNS）. It is found that the turbulent kinetic energy is amplified by strong shear in the separation zone and the adverse pressure gradient near the separation point. The pressure gradient was non-dimensionalised with local density, velocity, and viscosity. Spalart Allmaras （S A） model is modified by introducing the non-dimensional pressure gradient into the production term of the eddy viscosity transportation equation. Simulation results show that the production and dissipation of eddy viscosity are strongly enhanced by the modification of S-A model. Compared with DNS and experimental data, the wall pressure and the wall skin friction coefficient as well as the velocity profile of the modified S-A model are obviously improved. Thus it can be concluded that the mod- ification of S-A model with the pressure gradient can improve the predictive accuracy for simulat- ing the shock-wave/turbulent boundary laver interaction.
基金supported by the National Natural Science Foundation of China(Nos.92252201 and 11721202)。
文摘Accurate prediction of Shock-Wave/Boundary Layer Interaction(SWBLI)flows has been a persistent challenge for linear eddy viscosity models.A major limitation lies in the isotropic representation of the Reynolds stress,as assumed under the Boussinesq approximation.Recent studies have shown promise in improving the prediction capability for incompressible separation flows by perturbing the Reynolds-stress anisotropy tensor.However,it remains uncertain whether this approach is effective for SWBLI flows,which involve compressibility and discontinuity.To address this issue,this study systematically quantifies the structural uncertainty of the anisotropy for oblique SWBLI flows.The eigenspace perturbation method is applied to perturb the anisotropy tensor predicted by the Menter Shear–Stress Transport(SST)model and reveal the impacts of anisotropy on the prediction of quantities of interest,such as separation and reattachment positions,wall static pressure,skin friction,and heat flux.The results demonstrate the potential and reveal the challenges of eigenspace perturbation in improving the SST model.Furthermore,a detailed analysis of turbulent characteristics is performed to identify the source of uncertainty.The findings indicate that eigenspace perturbation primarily affects turbulent shear stress,while the prediction error of the SST model is more related to turbulent kinetic energy.
基金supported by National Science and Technology Major Project (2017-Ⅱ-0007-0021)。
文摘Experimental and numerical investigations were conducted to investigate the variations of shock-wave boundary layer interaction(SBLI) phenomena in a highly loaded transonic compressor cascade with Mach numbers.The schlieren technique was used to observe the shock structure in the cascade and the pressure tap method to measure the pressure distribution on the blade surface.The unsteady pressure distribution on blade surface was measured with the fast-response pressure-sensitive paint(PSP) technique to obtain the unsteady pressure distribution on the whole blade surface and to capture the shock oscillation characteristics caused by SBLI.In addition,the Reynolds Averaged Navier Stokes simulations were used to compute the three-dimensional steady flow field in the transonic cascade.It was found that the shock wave patterns and behaviors are affected evidently with the increase in incoming Mach number at the design flow angle,especially with the presence of the separation bubble caused by SBLI.The time-averaged pressure distribution on the blade surface measured by PSP technique showed a symmetric pressure filed at Mach numbers of 0.85,while the pressure field on the blade surface was an asymmetric one at Mach numbers of 0.90 and 0.95.The oscillation of the shock wave was closely with the flow separation bubble on the blade surface and could transverse over nearly one interval of the pressure taps.The oscillation of the shock wave may smear the pressure jump phenomenon measured by the pressure taps.
文摘This paper describes a theoretical method for reconstruction of the skin friction topology in complex separated flows,which is developed based on the exact relation between skin friction and surface pressure through the boundary enstrophy flux(BEF).The key of this method is that a skin friction field is reconstructed from a surface pressure field as an inverse problem by applying a variational method.For applications,the approximate method is proposed,where the composite surface pressure field is given by a linear superposition of the base-flow surface pressure field and the surface pressure variation field and the base-flow BEF field is used as the first-order approximation.This approximate method is constructive in a mathematical sense since a complex skin friction field in separated flows can be reconstructed from some elemental skin friction structures(skin friction source/sink,vortex and their combinations)by a linear superposition of some simple surface pressure structures.The distinct topological features,such as critical points,separation lines and attachment lines,naturally occur as a result of such reconstruction.As examples,some elemental skin friction structures in separated flows are reconstructed in simulations,and the skin friction fields in shock-wave/boundary-layer interactions(SWBLIs)are reconstructed from pressure sensitive paint(PSP)images obtained in wind tunnel experiments.
基金supported by the National Natural Science Foundation of China(Grant No.10932005)
文摘Flows around vortex generators(VGs),which serve as one of the important flow control methods,are investigated by solving Reynolds-averaged Navier-Stokes(RANS)equations.The influences on the main flow of VGs are intended to explore.Firstly, the flow around a single VG on a flat plane is computed to validate the schemes and to acquire basic knowledge of this kind of flow.Secondly,transonic flow past a standard model,named by ONERA-M6 wing,is predicted to investigate the flow features of shockwave/boundary-layer interactions(SWBLI).Thirdly,the effects of a row of VGs mounted about 25%local chord on a supercritical wing are analyzed in transonic condition with strong SWBLI.Lastly,VGs are mounted more upwind(about 3.5%local chord)to explore the effects at low speed and high incidence condition.The numerical results show that seven VGs can effectively suppress the separations behind the strong SWBLI and decrease spanwise flow and wing-tip vortex in transonic condition.VGs also can decrease the large scope of separation over the wing at low speed with high angle of attack.
文摘A two-dimensional Reynolds averaged Navier Stokes(RANS)simulation of a dual mode ramjet(DMRJ)combustor is performed,modeling the University of Michigan dual-mode combustor experimental setup operating in reacting mode with different equivalence ratios(4).The simulations are carried out using a k-u SST turbulence model and a steady diffusion flamelet model for non-premixed combustion.Air enters the isolator at Mach 2.2,stagnation pressure and temperature of 549.2 kPa and 1400 K respectively.Hydrogen is injected transverse to the flow direction and upstream of the cavity flame holder to simulate ramjet(4 Z 0.29)and scramjet(4 Z 0.19)modes of operation.Wall static pressure plots are used to validate numerical results against experimental data.Analysis of flow separation in ramjet mode due to the presence of a shock train in the isolator is carried out by means of numerical Schlieren images overlapped with contours of negative axial velocity,showing the effects of shock wave boundary layer interaction(SWBLI).Active control through wall normal boundary layer bleed in the separated flow region is implemented,which weakens the shock train and moves it downstream closer to the cavity.Bleed results in an improved stagnation pressure recovery in ramjet mode,with a marginal increase in combustion efficiency.
